HSC0603-2N0J-T

PRODUCT SPECIFICATION SPEC. NO: T-0619-003r DATE: Aug.21,2018 CUSTOMER'S PRODUCT NAME: EMTEK PRODUCT NAME: HSC0603-SERIES THIS SPECIFICATION IS: □ FULLY ACCEPTED □ DENIED □ ACCEPTED UNDER THE FOLLOWING CONDITIONS SIGNATURE: NAME(PRINT): TITLE: 本文件內容全部或部份,未經兆欣科技股份有限公 司同意不得以任何形式複製或其他用途 All rights reserved.This document or parts thereof,may not be reproduced by any means or used in any manner witout written permission of EMTEK CO.,LTD. DATE: FACTORY: 39,Chingao Rd.,(305)Hsinpu, Hsinchu Hsien,Taiwan,R.O.C TEL: 03-5894-433 FAX: 03-5894-523 1/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r 1. Scope This specification applies Wire Wound Ceramic Chip Inductor HSC0603-Series to be delivered to user. 2. Product Identification HSC 0603 - 10N □ - T (1) (2) (3) (4) (5) (1) Product name (2) Shapes and dimensions (3) Inductance 10N : 10 nH (4) Tolerance G=±2% , J=±5% , K=±10% (5) Taping Type 3. Shapes and Dimensions A max. : 1.8 mm C B D B max. : 1.2 mm C max. : 1.02 mm E D ref. A F : 0.45 mm E : 0.33 ± 0.1 mm F : 0.89 ± 0.1 mm E G : 0.90 mm G Terminal Terminal wraparound : Approx. 0.18mm both ends Equivalent circuit No Polarity Drawn by Checked by Approved by 2/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r 4. Electrical Characteristics Customer Part Number Our Product Part Number Inductance Tole. (nH)/MHz HSC0603-1N6□-T 1.6/250 HSC0603-1N8□-T 1.8/250 HSC0603-1N9□-T 1.9/250 HSC0603-2N0□-T 2.0/250 HSC0603-2N2□-T 2.2/250 HSC0603-3N3□-T 3.3/250 HSC0603-3N6□-T 3.6/250 HSC0603-3N9□-T 3.9/250 HSC0603-4N1□-T 4.1/250 HSC0603-4N3□-T 4.3/250 HSC0603-4N7□-T 4.7/250 HSC0603-5N1□-T 5.1/250 HSC0603-5N6□-T 5.6/250 HSC0603-6N0□-T 6.0/250 HSC0603-6N2□-T 6.2/250 HSC0603-6N3□-T 6.3/250 HSC0603-6N8□-T 6.8/250 HSC0603-7N5□-T 7.5/250 Q/MHz Min. J K J K J K J K J K J K J K G J K J K J K J K J K J K J K G J K J K G J K G J K 900MHz 1.7GHz SRF (MHz) Min. Rdc (Ω) Max. Irms Color (mA) Coding Max. L typ Q typ L typ Q typ 24/250 1.61 72.86 1.61 89.61 12500 0.030 700 Red 16/250 1.77 46.55 1.77 59.72 12500 0.045 700 Black 13/250 1.85 33.56 1.9 53.33 12500 0.060 700 Red 13/250 1.97 44.00 1.96 89.73 12500 0.080 700 Orange 13/250 2.14 26.03 2.13 34.11 12500 0.150 700 Yellow 30/250 3.42 73.45 3.46 95.36 5900 0.045 700 Blue 22/250 3.68 64.2 3.73 82.77 5900 0.063 700 Red 22/250 3.90 50.11 3.94 67.32 6900 0.080 700 Brown 22/250 4.18 66.3 4.38 80.63 6000 0.063 700 Red 22/250 4.44 67.5 4.59 81.57 5900 0.063 700 Orange 20/250 4.65 58.79 4.75 75.36 5800 0.085 700 Violet 20/250 5.07 54.5 5.21 70.06 5700 0.115 700 Green 20/250 5.48 43.67 5.66 55.16 5800 0.160 700 Black 20/250 6.08 64 6.4 108 5700 0.115 700 Brown 26/250 6.35 65.72 6.69 85.36 5700 0.115 700 Gray 26/250 6.54 68.68 6.71 88.51 5700 0.115 700 White 27/250 6.89 62.87 7.08 82.33 5800 0.125 700 Red 28/250 7.57 65.18 7.84 85.57 4800 0.115 700 Brown 3/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r 4. Electrical Characteristics Customer Part Number Our Product Part Number Inductance Tole. (nH)/MHz HSC0603-8N2□-T 8.2/250 HSC0603-8N7□-T 8.7/250 HSC0603-9N1□-T 9.1/250 HSC0603-9N5□-T 9.5/250 HSC0603-10N□-T 10/250 HSC0603-11N□-T 11/250 HSC0603-12N□-T 12/250 HSC0603-13N□-T 13/250 HSC0603-15N□-T 15/250 HSC0603-16N□-T 16/250 HSC0603-18N□-T 18/250 HSC0603-19N□-T 19/250 HSC0603-20N□-T 20/250 L typ Q typ L typ Q typ SRF (MHz) Min. 30/250 8.13 65.01 8.47 82.23 4700 0.125 700 Orange 28/250 8.76 63.94 9.22 76.37 4600 0.109 700 Yellow 28/250 9.208 62.29 9.77 75.88 4600 0.120 700 Black 62.25 10.58 69.16 5400 0.145 700 Blue 31/250 10.36 69.22 10.81 90.90 4800 0.145 700 Orange 30/250 11.22 67.67 11.80 85.69 4000 0.145 700 Gray 35/250 12.37 69.26 13.22 83.39 4000 0.130 700 Yellow 30/250 13.06 71.34 13.27 82.32 4000 0.130 700 Red 35/250 15.22 76.65 16.37 88.93 4000 0.170 700 Green 34/250 16.6 79.11 18.38 79.94 3300 0.170 700 White 35/250 18.44 76.19 20.05 80.07 3100 0.180 700 Blue 35/250 19.71 73.77 23.35 62.78 3000 0.190 700 Brown 38/250 20.5 3000 0.180 700 Red Q/MHz Min. J K G J K J K G J K G J K G J K G J K G J K G J K G J K G J K G J K G J K 900MHz 28/250 9.79 1.7GHz 79.78 23.27 86.77 Rdc (Ω) Max. Irms Color (mA) Coding Max. 4/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r 4. Electrical Characteristics Customer Part Number Our Product Part Number Inductance Tole. (nH)/MHz Q typ SRF (MHz) Min. Rdc (Ω) Max. Irms Color (mA) Coding Max. 38/250 22.66 78.78 25.67 83.99 3000 0.190 700 Violet 38/250 24.19 70.88 28.48 72.86 2850 0.205 700 Orange 36/250 25.74 70.93 31.01 63.21 2650 0.205 700 Black 38/250 25.93 84.76 29.73 89.52 2800 0.210 600 Yellow 29.03 59.83 37.43 46.06 2800 0.220 600 Gray 37/250 32.91 68.96 41.66 59.67 2250 0.220 600 Brown 40/250 35.72 61.57 47.39 50.44 2300 0.220 600 White 37/250 39.45 64.02 50.92 59.84 2080 0.250 600 Red 40/250 42.71 61.22 58.42 47.55 2200 0.260 600 Black 38/250 47.21 62.53 64.17 53.05 2000 0.280 600 Orange 38/200 51.82 52.98 77.03 39.17 2000 0.280 600 Brown 38/250 59.27 50.95 103.8 23.61 2130 0.300 600 Violet Q/MHz Min. 900MHz L typ Q typ 1.7GHz L typ G HSC0603-22N□-T 22/250 J K G HSC0603-23N□-T 23/250 J K G HSC0603-24N□-T 24/250 J K G HSC0603-25N□-T 25/250 J K G HSC0603-27N□-T 27/250 40/250 J K 50/500 G HSC0603-30N□-T 30/250 J K G HSC0603-33N□-T 33/250 J K G HSC0603-36N□-T 36/250 J K G HSC0603-39N□-T 39/250 J K G HSC0603-43N□-T 43/250 J K G HSC0603-47N□-T 47/200 J K G HSC0603-51N□-T 51/200 J K 5/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r 4. Electrical Characteristics Customer Part Number Our Product Part Number Inductance Tole. (nH)/MHz Q typ SRF (MHz) Min. Rdc (Ω) Max. Irms Color (mA) Coding Max. 38/200 64.38 51.47 108.1 28.82 1900 0.310 600 Red 37/200 73.3 42.68 156.5 16.15 1800 0.330 600 Gray 37/200 80.23 44.33 174.0 18.31 1700 0.340 600 Orange 34/150 86.67 41.11 212.9 15.59 1700 0.490 400 Yellow Q/MHz Min. 900MHz L typ Q typ 1.7GHz L typ G HSC0603-56N□-T 56/200 J K G HSC0603-62N□-T 62/200 J K G HSC0603-68N□-T 68/200 J K G HSC0603-72N□-T 72/150 J K G HSC0603-75N□-T 75/150 J 34/150 － － － － 1700 0.430 1000 Blue － － 1700 0.500 400 White 1700 0.540 400 Green K G HSC0603-79N□-T 79/150 J 34/150 87.02 44.18 K G HSC0603-82N□-T 82/150 J 34/150 101.2 37.88 300.6 11.78 K G HSC0603-85N□-T 85/150 J － － 1600 0.550 400 Blue 34/150 111.8 49.36 － － 1500 0.560 400 Brown 34/150 126.9 36.13 － － 1400 0.580 400 Blue 32/150 146.8 34.58 － － 1350 0.610 300 Violet 32/150 166.8 28.57 － － 1300 0.650 300 Gray 34/150 92.4 98 K G HSC0603-91N□-T 91/150 J K G HSC0603-R10□-T 100/150 J K G HSC0603-R11□-T 110/150 J K G HSC0603-R12□-T 120/150 J K 6/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r 4. Electrical Characteristics Customer Part Number Our Product Part Number Inductance Tole. (nH)/MHz L typ Q typ SRF (MHz) Min. 32/150 180.1 36.93 － － 1200 0.750 280 Orange － － － 1000 0.900 280 Yellow 28/150 234.9 21.92 － － 990 0.920 280 White 28/150 247.5 13.58 － － 990 1.050 260 Red 25/100 228.4 34.96 － － 990 1.150 240 Yellow 25/100 289.1 19.93 － － 990 1.250 240 Black 25/100 279.1 30.83 － － 990 1.350 200 Green 25/100 － － － － 990 1.500 200 Orange 25/100 － － － － 900 1.600 250 Brown 25/100 － － － － 900 1.900 200 Violet 25/100 － － － － 900 2.340 250 Green 24/100 － － － － 900 2.000 170 Red 25/100 － － － － 900 2.700 150 Green 25/100 － － － － 900 2.750 100 Blue Q/MHz Min. 900MHz L typ Q typ 1.7GHz Rdc (Ω) Max. Irms Color (mA) Coding Max. G HSC0603-R13□-T 130/150 J K G HSC0603-R14□-T 140/150 J 30/150 － K G HSC0603-R15□-T 150/150 J K G HSC0603-R16□-T 160/150 J K G HSC0603-R17□-T 170/100 J K G HSC0603-R18□-T 180/100 J K G HSC0603-R19□-T 190/100 J K G HSC0603-R20□-T 200/100 J K G HSC0603-R22□-T 220/100 J K G HSC0603-R24□-T 240/100 J K G HSC0603-R25□-T 250/100 J K G HSC0603-R27□-T 270/100 J K G HSC0603-R30□-T 300/100 J K G HSC0603-R33□-T 330/100 J K 7/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r 4. Electrical Characteristics Customer Part Number Our Product Part Number Inductance Tole. (nH)/MHz HSC0603-R34□-T 340/100 HSC0603-R36□-T 360/100 G J K G J Min. L typ Q typ L typ Q typ SRF (MHz) Min. 25/100 － － － － 900 2.900 100 Gray 25/100 － － － － 900 3.070 100 Red 25/100 － － － － 900 3.100 100 Orange 25/100 － － － － 900 3.150 100 Yellow 25/100 － － － － 750 4.000 80 Green Q/MHz 900MHz 1.7GHz Rdc (Ω) Max. Irms Color (mA) Coding Max. K G HSC0603-R37□-T 370/100 J K G HSC0603-R39□-T 390/100 J K G HSC0603-R47□-T 470/100 J K 1. When ordering, please specify tolerance and packaging codes. Ex: HSC0603-R39J-T Tolerance : G = ±2% , J = ±5% , K = ±10% Packaging : Clear tape and reel { standard }. 2. L , Q、SRF : Agilent/HP E4991A+ Agilent/HP16197A (The electrical specification test by the smallest gap position) or HP16193A 3. Rdc : Chroma Milliohmmeter 16502, or equivalent. 4. Irms for a 15℃ rise above 25℃ ambient. 5. Operating temperature range from -40℃ to 125℃. 1st Code COLOR CODING 8/13 SPEC. NO. PRODUCT SPECIFICATION 5. Material list Item Core Wire Epoxy Material Al2O3 96% Copper wire UV Epoxy T-0619-003r 9/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r 6.Reliability Test Item Solderability Specifications The metalized area must have 90% minimum solder coverage. Test conditions Dip pads in flux and dip in solder pot( 96.5 Sn/3.5 Ag solder) at 255°C ±5°C. Resistance to soldering heat There must be no case deformation or change in dimensions. Inductance must not change more than the stated tolerance. Inductors shall be reflowed onto a PC board using 96.5 Sn/3.5 Ag solder paste. Solder process shall be at a maximum temperature of 260°C. For 96.5 Sn/3.5 Ag solder paste:>217°C for 90 seconds Vibration There must be no case deformation or Solder specimen inductor on the test printed circuit change in dimensions. board. Apply vibrations in each of the x,y and z Inductance must not change more directions for 2 hours for a total of 6 hours. than the stated tolerance. Frequency : 10~50 Hz Amplitude : 1.5mm High temperature resistance There must be no case deformation or change in dimensions. Inductance must not change more than the stated tolerance. Component adhesion (push test) Inductors shall be subjected to 0.9Kg Inductors shall be reflow soldered (255°C ±5°C for 10 seconds) to a tinned copper substrate. A force gauge shall be applied to the side of the component. The device must withstand the stated force without a failure of the termination. Inductors shall be subjected to temperature 125 ±2℃ for 500±12 hours. Measure the test items after leaving the inductors at room temperature and humidity for 2 hours. 10/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r Item Static Humidity Specifications Test conditions Inductors must not have a shorted or Inductors shall be subjected to temperature 85 openwinding. ±2℃ and 90 to 95%RH. for ten 24 hours. Measure the test items after leaving the inductors at room temperature and humidity for 2 hours. Low temperature resistance There must be no case deformation or change in dimensions. Inductance must not change more than the stated tolerance. Resistance to solvent There must be no case deformation, Inductors must withstand 6 minutes of alcohol or change in dimensions, or obliteration water. of marking. Thermal shock There must be no case deformation or Inductors shall be subjected to 10 cycles to the change in dimensions. following temperature cycle: Inductance must not change more 1 cycle than the stated tolerance. 30 min. +125℃ 30 sec Inductors shall be subjected to temperature -40± 2℃ for 500±12 hours. Measure the test items after leaving the inductors at room temperature and humidity for 1 to 2 hours. -40℃ 30 min. Measure the test items after leaving the inductors at room temperature and humidity for 2 hours. 11/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r 7.Packaging The packaging must be done not to receive any damage during transporting and storing. 7-1 Tape dimensions Ko P1 P0 P W Bo t Ao ( Dimensions in mm; Tolerance：±0.1) Symbol W P P0 P1 Ao Bo Ko t Dimension 8 4 4 2 1.2 1.9 1 0.22 7-2 Reel dimensions D ( Dimensions in mm ) Symbol T C B A A B 180 C 13 D 14.4 E 8.4 E 7-3 Tapping figure Top cover tape Carrier tape Sprocket hole Cavity (chip insert) 60 12/13 PRODUCT SPECIFICATION SPEC. NO. T-0619-003r 7-4 Packaging Form There shall not continuation more than two vacancies of the product. (360 mm) Leader. Blank (50 pitches) Chip Blank (70 pitches) 7-5 Cover Tape Peel Strength The force for tearing off cover tape is 0.1~0.6(N) in the arrow direction at the following conditions: Temperature : 5 ~ 35℃ Humidity : 45 ~ 85% Atmospheric pressure : 860 ~ 1060 hpa 160 ~ 180。 Top cover tape Base tape 7-6 Packing Quantity φ180 mm reel type : 4,000 pcs./reel 13/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-003r 8. Recommended Soldering Conditions (Please use this product by reflow soldering) 8-1 Recommended Footprint 0.64 0.64 0.64 1.02 Unit: mm 8-2 Recommended Reflow Pattern Reflow : until two times 10 sec. Min. 255℃ 217℃ Natural cooling 150sec. Max. 150℃ 60sec. Min. 8-3 Iron Soldering Use a solder iron of less than 30W when soldering ,do not allow the soldering iron tip directly touch the Ceramic body outside of terminal electrode. 5 seconds max. at 260℃. 9. Attention in Case of Using In case of using product ,please avoid following matters: Splashing water or salt water Dew condenses Toxic gas (Hydrogen sulfide, Sulfurous acid ,Chlorine, Ammonia) Vibrations or shocks which exceed the specified condition Please be careful for the stress to this product by board flexure or something after the mounting. 10. Others 10-1 Operating temperature range : Ceramic Series :-40~+125℃ 10-2 Storage condition : Temperature 20°~25℃﹐Relative Humidity 40%~60% 10-3 Recommended wire wound inductors should be used within 6 months from the time of delivery.