HSC0805-2N2K-T

PRODUCT SPECIFICATION SPEC. NO: T-0619-001h DATE: Aug.21,2018 CUSTOMER'S PRODUCT NAME: EMTEK PRODUCT NAME: HSC0805-SERIES THIS SPECIFICATION IS: □ FULLY ACCEPTED □ DENIED □ ACCEPTED UNDER THE FOLLOWING CONDITIONS SIGNATURE: NAME(PRINT): TITLE: DATE: FACTORY: 本文件內容全部或部份,未經兆欣科技股份有限公 司同意不得以任何形式複製或其他用途 All rights reserved.This document or parts thereof,may not be reproduced by any means or used in any manner witout written permission of EMTEK CO.,LTD. 39,Chingao Rd.,(305)Hsinpu, Hsinchu Hsien,Taiwan,R.O.C TEL: 03-5894-433 FAX: 03-5894-523 1/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-001h 1. Scope This specification applies Wire Wound Ceramic Chip Inductor HSC0805-Series to be delivered to user. 2. Product Identification HSC 0805 - 10N □ - T (1) (2) (3) (4) (5) (1) Product name (2) Shapes and dimensions (3) Inductance 10N : 10 nH (4) Tolerance G=±2% , J=±5% , K=±10% (5) Taping Type 3. Shapes and Dimensions C B D A max. : 2.40 mm B max. : 1.65 mm E A C max. : 1.45 mm D ref. F E G : 0.65 mm E: 0.44 ± 0.1 mm F: 1.15 ± 0.1 mm G: 1.27 mm Terminal Terminal wraparound : Approx. 0.38mm both ends Equivalent circuit No Polarity Drawn by Checked by Approved by 2/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-001h 4. Electrical Characteristics Customer Our Product Inductance Inductance Q/MHz SRF(Min.) Rdc Irms Max. Part Number Part Number (nH)/MHz Tolerance Min. (MHz) (Ω)Max. (mA) Color Coding 50/1000 7900 0.05 800 Violet 50/1500 7900 0.058 800 Blue HSC0805-2N2□-T 2.2/250 K HSC0805-2N7□-T 2.7/250 J K HSC0805-2N8□-T 2.8/250 J K 55/1500 7900 0.06 800 Gray HSC0805-3N0□-T 3.0/250 J K 55/1500 7900 0.08 800 White HSC0805-3N3□-T 3.3/250 J K 45/1500 7900 0.12 600 Black HSC0805-4N1□-T 4.1/250 J K 60/1000 5800 0.06 600 Brown HSC0805-5N1□-T 5.1/250 J K 60/1000 5800 0.06 600 Yellow HSC0805-5N6□-T 5.6/250 J K 65/1000 5500 0.08 600 Orange HSC0805-6N2□-T 6.2/250 J K 50/1000 5500 0.11 800 Violet HSC0805-6N8□-T 6.8/250 J K 50/1000 5500 0.11 600 Brown HSC0805-7N5□-T 7.5/250 J K 50/1000 4500 0.14 600 Green HSC0805-8N2□-T 8.2/250 J K 50/1000 4700 0.16 600 Red HSC0805-8N7□-T 8.7/250 50/1000 4700 0.23 600 Violet HSC0805-10N□-T 10/250 J K G J K 60/500 4200 0.10 600 Blue 3/13 SPEC. NO. PRODUCT SPECIFICATION Customer Part Number Our Product Inductance Inductance (nH)/MHz Tolerance G 12/250 HSC0805-12N□-T J Part Number T-0619-001h Q/MHz SRF(Min.) Rdc Irms Max. Min. (MHz) (Ω)Max. (mA) Color Coding 50/500 4000 0.15 600 Orange 50/500 3400 0.17 600 Yellow 50/500 3400 0.17 700 Yellow 50/500 3300 0.19 600 Green 50/500 3300 0.20 600 Green 55/500 2600 0.22 500 Blue 50/500 2000 0.22 500 Gray 55/500 2500 0.25 500 Violet 60/500 2050 0.27 500 Gray 55/500 1700 0.27 500 Orange 60/500 2000 0.29 500 White 60/500 1650 0.34 500 Yellow 60/500 1650 0.31 700 Black K G HSC0805-14N□-T 14/250 J K G HSC0805-15N□-T 15/250 J K G HSC0805-16N□-T 16/250 J K G HSC0805-18N□-T 18/250 J K G HSC0805-22N□-T 22/250 J K G HSC0805-24N□-T 24/250 J K G HSC0805-27N□-T 27/250 J K G HSC0805-33N□-T 33/250 J K G HSC0805-36N□-T 36/250 J K G HSC0805-39N□-T 39/250 J K G HSC0805-43N□-T 43/200 J K G HSC0805-47N□-T 47/200 J K 4/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-001h Customer Our Product Inductance Inductance Q/MHz SRF(Min.) Rdc Irms Max. Part Number Part Number (nH)/MHz Tolerance G 50/200 J K G 56/200 J K G 68/200 J K G 72/200 J K G J 75/200 K G 82/150 J K G 91/150 J K G 100/150 J K G J 110/150 K G 120/150 J K G 130/150 J K G 150/100 J K G J 160/100 K G 180/100 J K G 200/100 J K Min. (MHz) (Ω)Max. (mA) Color Coding 60/500 1650 0.34 500 Green 60/500 1550 0.34 500 Brown 60/500 1450 0.38 500 Red 60/500 1400 0.40 400 Orange 60/500 1400 0.40 400 Violet 65/500 1300 0.42 400 Orange 65/500 1200 0.48 400 Black 65/500 1200 0.46 400 Yellow 50/250 1000 0.48 400 Brown 50/250 1100 0.51 400 Green 50/250 1000 0.55 400 Orange 50/250 920 0.56 400 Blue 50/250 900 0.60 400 Gray 50/250 870 0.64 400 Violet 50/250 865 0.68 400 Red HSC0805-50N□-T HSC0805-56N□-T HSC0805-68N□-T HSC0805-72N□-T HSC0805-75N□-T HSC0805-82N□-T HSC0805-91N□-T HSC0805-R10□-T HSC0805-R11□-T HSC0805-R12□-T HSC0805-R13□-T HSC0805-R15□-T HSC0805-R16□-T HSC0805-R18□-T HSC0805-R20□-T 5/13 SPEC. NO. PRODUCT SPECIFICATION Customer Part Number Our Product Inductance Inductance (nH)/MHz Tolerance G HSC0805-R22□-T 220/100 J Part Number T-0619-001h Q/MHz SRF(Min.) Rdc Irms Max. Min. (MHz) (Ω)Max. (mA) Color Coding 50/250 850 0.70 400 Gray 44/250 690 1.00 350 Red 48/250 680 1.00 350 Yellow 48/250 650 1.00 350 White 48/250 790 1.40 330 Green 48/250 750 1.40 310 Black 48/250 650 1.45 300 Orange 48/250 560 1.50 290 Brown 33/100 430 1.70 270 Blue 30/100 375 1.76 250 Violet 23/50 340 1.90 230 Orange 23/50 220 2.20 210 White 23/50 188 2.20 190 Green K G HSC0805-R24□-T 240/100 J K G HSC0805-R25□-T 250/100 J K G HSC0805-R27□-T 270/100 J K G HSC0805-R30□-T 300/100 J K G HSC0805-R33□-T 330/100 J K G HSC0805-R36□-T 360/100 J K G HSC0805-R39□-T 390/100 HSC0805-R43□-T 430/50 HSC0805-R47□-T 470/50 HSC0805-R56□-T 560/25 HSC0805-R62□-T 620/25 HSC0805-R68□-T 680/25 J K G J K G J K G J K G J K G J K 6/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-001h Customer Our Product Inductance Inductance Q/MHz SRF(Min.) Rdc Irms Max. Part Number Part Number (nH)/MHz Tolerance G Min. (MHz) (Ω)Max. (mA) Color Coding 23/50 200 2.30 180 Violet 23/50 215 2.35 180 Blue 22/50 212 2.38 180 Green 22/50 210 2.40 180 Yellow 22/50 200 2.45 180 Green 22/50 200 2.45 180 Violet 16/7.9 160 2.45 170 Green 16/7.9 120 2.50 170 Black 16/7.9 80 2.50 170 Brown 16/7.9 60 2.70 160 Red 16/7.9 50 4.00 160 Orange 10/7.9 40 15 130 Yellow HSC0805-R75□-T 750/25 J K G HSC0805-R82□-T 820/25 J K G HSC0805-R88□-T 880/25 J K HSC0805-R91□-T 910/25 J K G HSC0805-R93□-T 930/25 J K G HSC0805-1R0□-T 1000/25 J K G HSC0805-1R2□-T 1200/7.9 J K G HSC0805-1R5□-T 1500/7.9 J K G HSC0805-1R8□-T 1800/7.9 J K G HSC0805-2R2□-T 2200/7.9 J K G HSC0805-2R7□-T 2700/7.9 J K HSC0805-4R7□-T 4700/7.9 J K 7/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-001h 1. When ordering, please specify tolerance and packaging codes. Ex: HSC0805-1R0J-T Tolerance : G = ±2% , J = ±5% , K = ±10% Packaging : Clear tape and reel { standard }. 1st 2. L , Q、SRF : Agilent/HP E4991A+ Agilent/HP16197A (The electrical specification test by the smallest gap position) or HP16193A 3. Rdc : DIGITAL MILLIOHM METER Chroma 16502, or equivalent. 4. Irms for a 15℃ rise above 25℃ ambient. 5. Operating temperature range from -40℃ to 125℃. COLOR CODING 8/13 SPEC. NO. PRODUCT SPECIFICATION 5. Material list Item Core Wire Epoxy Material Al203 96% Copper wire UV Epoxy T-0619-001h 9/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-001h 6.Reliability Test Specifications Item Solderability The metalized area must have 90% minimum solder coverage. Resistance to soldering heat Test conditions Dip pads in flux and dip in solder pot( 96.5 Sn/3.5 Ag solder) at 255°C ±5°C. There must be no case deformation or Inductors shall be reflowed onto a PC board using change in dimensions. 96.5 Sn/3.5 Ag solder paste. Inductance must not change more than Solder process shall be at a maximum temperature the stated tolerance. of 260°C. For 96.5 Sn/3.5 Ag solder paste:>217°C for 90 seconds Vibration There must be no case deformation or Solder specimen inductor on the test printed circuit board. Apply vibrations in each of the x,y and z change in dimensions. Inductance must not change more than directions for 2 hours for a total of 6 hours. the stated tolerance. Frequency : 10~50 Hz Amplitude : 1.5mm There must be no case deformation or Inductors shall be subjected to temperature 125±2℃ High for 500±12 hours. temperature change in dimensions. resistance Inductance must not change more thanMeasure the test items after leaving the inductors at the stated tolerance. Static Humidity room temperature and humidity for 2 hours. Inductors must not have a shorted or Inductors shall be subjected to temperature 85±2℃ and 90 to 95%RH. for ten 24-hours. openwinding. Measure the test items after leaving the inductors at room temperature and humidity for 2 hours. Component Inductors shall be subjected to 1.8Kg Inductors shall be reflow soldered (255°C ±5°C for 10 seconds) to a tinned copper substrate. adhesion A force gauge shall be applied to the side of the (push test) component. The device must withstand the stated force without a failure of the termination. 10/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-001h Specifications Test conditions Item There must be no case deformation or Inductors shall be subjected to temperature Low -40±2℃ for 500±12 hours. temperature change in dimensions. Measure the test items after leaving the inductors resistance Inductance must not change more than the stated tolerance. at room temperature and humidity for 1 to 2 hours. Resistance to solvent There must be no case deformation, Thermal shock There must be no case deformation or Inductors shall be subjected to 10 cycles to the the following temperature cycle: change in dimensions. Inductors must withstand 6 minutes of alcohol or water. change in dimensions, or obliteration of marking. Inductance must not change more than the stated tolerance. 1 cycle 30 min. 30 sec +125℃ -40℃ 30 min. Measure the test items after leaving the inductors at room temperature and humidity for 2 hours. 11/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-001h 7.Packaging The packaging must be done not to receive any damage during transporting and storing. 7-1 Tape dimensions Ko P1 P0 P W Bo t Ao ( Dimensions in mm; Tolerance：±0.1) Symbol W P P0 P1 Ao Bo Ko t Dimension 8 4 4 2 1.57 2.28 1.4 0.22 7-2 Reel dimensions D ( Dimensions in mm ) C B Symbol T A B 180 C 13 D 14.4 E 8.4 A E 7-3 Tapping figure Top cover tape Carrier tape Sprocket hole Cavity (chip insert) 60 12/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-001h 7-4 Packaging Form There shall not continuation more than two vacancies of the product. (360 mm) Leader. Blank (50 pitches) Chip Blank (70 pitches) 7-5 Cover Tape Peel Strength The force for tearing off cover tape is 0.1~0.6(N) in the arrow direction at the following conditions: Temperature : 5 ~ 35℃ Humidity : 45 ~ 85% Atmospheric pressure : 860 ~ 1060 hpa 160 ~ 180。 Top cover tape Base tape 7-6 Packing Quantity φ180 mm reel type : 2,000 pcs./reel 13/13 SPEC. NO. PRODUCT SPECIFICATION T-0619-001h 8. Recommended Soldering Conditions (Please use this product by reflow soldering) 8-1 Recommended Footprint 1.02 0.76 1.02 1.78 Unit: mm 8-2 Recommended Reflow Pattern Reflow : until two times 10sec. Min. 255℃ 217℃ Natural cooling 150sec. Max. 150℃ 60sec. Min. 8-3 Iron Soldering Use a solder iron of less than 30W when soldering ,do not allow the soldering iron tip directly touch the Ceramic body outside of terminal electrode. 5 seconds max. at 260℃. 9. Attention in Case of Using In case of using product ,please avoid following matters: Splashing water or salt water Dew condenses Toxic gas (Hydrogen sulfide, Sulfurous acid ,Chlorine, Ammonia) Vibrations or shocks which exceed the specified condition Please be careful for the stress to this product by board flexure or something after the mounting. 10. Others 10-1 Operating temperature range : Ceramic Series :-40~+125℃ 10-2 Storage condition : Temperature 20°~25℃﹐Relative Humidity 40%~60% 10-3 Recommended wire wound inductors should be used within 6 months from the time of delivery.