DG401A

Surge arrester 2-Electrode arrester Series/Type: DG401A Customer: Version/Date: Issue 02/2015-9-9 DC Elec. 2015 . Reproduction,publication and dissemination of this document, enclosures here to and the information contained therein without DC' prior express consent is prohibited. Surge arrester 2-Electrode arrester DG401A Features Extremely small size Extremely fast response time Eexcllent SMD handing Applications ● ● ● Splitter PCI Cards Morden Stable performance over life Very low capacitance High insulation resistance RoHS-compatible UL-identification, No:E311500 ● Line cards ● ● ● ● ● ● ● ● Electrical specifications DC breakdown voltage 2) 3) ——Circuit current less than 2mA 400 ±20 V % ≤900 V GΩ Impulse breakdown voltage 1) at 1kv/us -Typical values of distribution Insulation resistance at DC 100V Capacitance at 1MHz Service life 2) 2) 10 operations 10 operations 8/20us 50Hz ≥1 ≤1 Pf Weight 1 1 ~1 KA A g Storage and operations temperature Climatic category（GB/T 9043，IEC61643-1) Marking,Red positive -40…+90 40/90/21 Without °C Tel: +86-510-81707285 Fax: +86-510-81707277 www.jsdgme.com DC Elec. Please read Cautions and warnings and important notes at the end of this document. Issue 02/2015-9-9 Page 2 of 4 Surge arrester 2-Electrode arrester DG401A DC breakdown voltage 8/20us, Test wave 10/700us,Test Wave 10/1000us,Test Wave T1=1.25T=8us±20% T1=1.67T=10us±20% T1=1.67T=10us±20% T2=20us±20% T2=700us±20% T2=1000us±20% Recommended wave slodering profile DC Elec. Please read Cautions and warnings and important notes at the end of this document. Issue 02/2015-9-9 Page 3 of 4 Surge arrester 2-Electrode arrester 1) 2) 3) DG401A Sampling size in accordance to AQL(C=0) DC spark-over voltage ±30% after load Tests according to ITU-T Rec. K. 12 and IEC61643-1 Dimensions Wire Tin-plated Packaging One reel with 3000pcs Cautions and warnings ● Surge arresters must not be operated directly in power supply networks ● Surge arresters may become hot in case of longer periods of current stress (danger of burning). ● If the contacts of the surge arrester are defective, current stress can lead to the formation of sparks and loud noises. ● Surge arresters may be used only within their specified values. In case of overload, the head contacts may fail or the component may be destroyed. ● Damaged surge arresters must not be re-used. DC Elec. Please read Cautions and warnings and important notes at the end of this document. Issue 02/2015-9-9 Page 4 of 4