DG2R3000L

Surge arrester 2-Electrode arrester Series/Type: DG2R3000L Customer: Version/Date: Issue 01/2017-10-19 DC Elec. 2017 . Reproduction,publication and dissemination of this document, enclosures here to and the information contained therein without DC' prior express consent is prohibited. Surge arrester 2-Electrode arrester DG2R3000L Features ● ● ● ● ● ● Applications Extremely small size Extremely fast response time Stable performance over life Very low capacitance ● Consumer electronics ● AC Power line devices ● Power supplier High insulation resistance RoHS-compatible Electrical specifications DC breakdown voltage 1)2) Tolerance Min. Max. Impulse breakdown voltage at 1kv/us 3000 ±20 2400 V % V 3600 V ≤4200 –For 99% measure values –Typical values of distribution ≤4000 Service life 10 operations 50Hz,1S 10 operations 8/20us Insulation resistance at DC 100V V V 5 5 ≥1 A KA GΩ Capacitance at 1MHz AC withstand voltage 1S ≤1.5 pF 1500 V Weight Storage and operations temperature Climatic category（IEC60068-1) 1.5 -40…+90 40/90/21 g °C Marking,Blue positive DG2R3000L Tel: +86-510-81707285 Fax: +86-510-81707277 www.jsdgme.com DC Elec. Please read Cautions and warnings and important notes at the end of this document. Issue 01/2017-10-19 Page 2 of 4 Surge arrester 2-Electrode arrester DG2R3000L DC breakdown voltage 8/20us, Test wave 10/700us,Test Wave 10/1000us,Test Wave T1=1.25T=8us±20% T1=1.67T=10us±20% T1=1.67T=10us±20% T2=20us±20% T2=700us±20% T2=1000us±20% Recommended wave slodering profile DC Elec. Please read Cautions and warnings and important notes at the end of this document. Issue 01/2017-10-19 Page 3 of 4 Surge arrester 2-Electrode arrester 1) 2) 3) Sampling size in accordance to AQL(C=0) In ionized mode Tests according to ITU-T Rec. K. 12 IEC61663-2 and IEC61643-311 DG2R3000L Dimensions Cautions and warnings Surge arresters must not be operated directly in power supply networks,whose maximum operating voltage exceeds the minimum spark-over voltage of the surge arresters. ● ● Surge arresters may become hot in case of longer periods of current stress (danger of burning). ● If the contacts of the surge arrester are defective, current stress can lead to the formation of sparks and loud noises. Surge arresters may be used only within their specified values. In case of overload, the head contacts may fail or the component may be destroyed. ● ● Damaged surge arresters must not be re-used. DC Elec. Please read Cautions and warnings and important notes at the end of this document. Issue 01/2017-10-19 Page 4 of 4