`
EUD-240SxxxDTL
240W Programmable Driver with Ultra Long Lifetime
Rev. B
Features
Innovative Design with No Electrolytic Capacitors
Ultra Long Lifetime: Greater than 100,000 hrs at 85C Case
Temperature
Full Power at Wide Output Current Range (Constant Power)
Thermal Sensing and Protection for LED Module
0-10V/PWM/Timer Dimmable (3 Timer Modes )
Dim-to-Off with Standby Power ≤ 0.5 W
Always-on Auxiliary Power: 12Vdc, 200mA
Output Lumen Compensation
Input Surge Protection: 6kV line-line, 10kV line-earth
All-Around Protection: OVP, SCP, OTP
Waterproof (IP67) and UL Dry / Damp / Wet Location
SELV Output
TYPE HL, for use in a Class I, Division 2 hazardous
(Classified) location
10 Years Warranty
Description
The EUD-240SxxxDTL series is a novel 240W design that has removed the use of Electrolytic capacitors to
extend lifetime at elevated temperatures. It is a constant-current, programmable LED driver that operates from
90-305 Vac input with excellent power factor. Created for many lighting applications including high bay, high
mast, sports and roadway, it provides a dim-to-off mode with low standby power. The high efficiency of these
drivers and compact metal case enables them to run cooler, significantly improving reliability and extending
product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage,
short circuit, and over temperature of both the driver and the external LED array.
Models
Adjustable
Output
Current
Range
Full-Power
Current
Range (1)
Default
Output
Current
Input
Voltage
Range(2)
90~305Vac
127~300Vdc
90~305Vac
140-2100mA 1400-2100mA 1400 mA
127~300Vdc
90~305Vac
280-4200mA 2800-4200mA 4200 mA
127~300Vdc
90~305Vac
445-6700mA 4450-6700mA 6700 mA
127~300Vdc
70-1050mA 700-1050mA 1050 mA
Output
Voltage
Range
Power Factor
Max.
Typical
Output Efficiency
120Vac 220Vac
Power
(3)
Model Number
(5)
114~343Vdc 240W
93.5%
0.98
0.96
EUD-240S105DTL
57~171Vdc 240W
93.5%
0.98
0.96
EUD-240S210DTL
29 ~ 86Vdc 240W
92.5%
0.98
0.96
EUD-240S420DTL
18 ~ 54Vdc 240W
92.5%
0.98
0.96
EUD-240S670DTL
(4)
(4)
Notes: (1) Output current range with constant power at 240W
(2) UL, FCC certified input voltage range: 100-277Vac or 127-300Vdc; otherwise: 100-240Vac or 127-250Vdc
(except KS)
(3) Measured at 100%load and 220Vac input (see below “General Specifications” for details).
(4) SELV Output.
(5) All the models are certificated to KS，except EUD-240S105DTL
1 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-240SxxxDTL
240W Programmable Driver with Ultra Long Lifetime
Rev. B
I-V Operating Area
EUD-240S105DTL
EUD-240S210DTL
EUD-240S420DTL
EUD-240S670DTL
Input Specifications
Parameter
Min.
Typ.
Max.
Notes
Input Voltage
90 Vac
-
305 Vac
Input Frequency
47 Hz
-
63 Hz
-
-
0.75 MIU
UL8750; 277Vac/ 60Hz
-
-
0.70 mA
IEC60598-1; 240Vac/ 60Hz
-
-
2.85 A
Measured at 100%load and 100 Vac input.
-
-
1.22 A
Measured at 100%load and 220 Vac input.
-
-
1.72 A s
127~300 Vdc
Leakage Current
Input AC Current
2
Inrush Current(I t)
2
At 220Vac input, 25C Cold Start,
Duration=128 μs, 10%Ipk-10%Ipk. See
Inrush Current Waveform for the details.
2 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-240SxxxDTL
240W Programmable Driver with Ultra Long Lifetime
Rev. B
Input Specifications (Continued)
Parameter
Min.
Typ.
Max.
0.90
-
-
THD
-
-
20%
THD
-
-
10%
At 220-240Vac, 50-60Hz, 75%-100% Load
(180-240W)
Min.
Typ.
Max.
Notes
-5%Ioset
-
5%Ioset
70 mA
140 mA
280 mA
445 mA
-
1050 mA
2100 mA
4200 mA
6700 mA
700 mA
1400 mA
2800 mA
4450 mA
-
1050 mA
2100 mA
4200 mA
6700 mA
-
8%Iomax
15%Iomax
-
2%Iomax
-
Startup Overshoot Current
-
-
10%Iomax
No Load Output Voltage
EUD-240S105DTL
EUD-240S210DTL
EUD-240S420DTL
EUD-240S670DTL
-
-
360 V
190 V
96 V
61 V
Line Regulation
-
-
±0.5%
Load Regulation
-
-
±1.5%
-
-
1.0 s
-
-
0.5 s
-
0.03%/C
-
12V Auxiliary Output Voltage
10.8 V
12 V
13.2 V
12V Auxiliary Output Source
Current
0 mA
-
200 mA
PF
Notes
At 100-277Vac, 50-60Hz, 70%-100% Load
(168-240W)
Output Specifications
Parameter
Output Current Tolerance
Output Current Setting(Ioset)
Range
EUD-240S105DTL
EUD-240S210DTL
EUD-240S420DTL
EUD-240S670DTL
Output Current Setting Range
with Constant Power
EUD-240S105DTL
EUD-240S210DTL
EUD-240S420DTL
EUD-240S670DTL
Total Output Current Ripple
(pk-pk)
Output Current Ripple at
< 200 Hz (pk-pk)
100%load, 20 MHz BW
100%load. Only this component of ripple is
associated with visible flicker.
Turn-on Delay Time
Temperature Coefficient of
Ioset
100%load
100%load
Measured at 100%load
Measured at 120Vac input, 70%-100%
Load
Measured at 220Vac input, 70%-100%
Load
Case temperature = 0C ~Tc max
Return terminal is “Dim−“
Note: All specifications are typical at 25C unless otherwise stated.
3 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-240SxxxDTL
240W Programmable Driver with Ultra Long Lifetime
Rev. B
General Specifications
Parameter
Min.
Typ.
Max.
89.0%
88.0%
91.0%
90.0%
-
89.0%
88.0%
91.0%
90.0%
-
88.0%
86.0%
90.0%
88.0%
-
88.5%
86.5%
90.5%
88.5%
-
91.5%
90.5%
93.5%
92.5%
-
91.5%
90.0%
93.5%
92.0%
-
90.5%
88.5%
92.5%
90.5%
-
90.5%
88.5%
92.5%
90.5%
-
92.0%
91.0%
94.0%
93.0%
-
92.0%
90.5%
94.0%
92.5%
-
90.5%
88.5%
92.5%
90.5%
-
91.0%
89.0%
93.0%
91.0%
-
Standby power
-
-
0.5 W
MTBF
-
256,000
Hours
-
Lifetime
-
100,000
Hours
-
Operating Case Temperature
for Safety Tc_s
-40°C
-
+89°C
Operating Case Temperature
for Warranty Tc_w
-40°C
-
+75°C
Case temperature for 10 years warranty.
Please see Inventronics EUD-DTL
Warranty Statement for complete details.
Storage Temperature
-40°C
-
+85°C
Humidity: 5%RH to 100%RH
Efficiency at 120 Vac input:
EUD-240S105DTL
Io= 700 mA
Io= 1050 mA
EUD-240S210DTL
Io= 1400 mA
Io= 2100 mA
EUD-240S420DTL
Io= 2800 mA
Io= 4200 mA
EUD-240S670DTL
Io= 4450 mA
Io= 6700 mA
Efficiency at 220 Vac input:
EUD-240S105DTL
Io= 700 mA
Io= 1050 mA
EUD-240S210DTL
Io= 1400 mA
Io= 2100 mA
EUD-240S420DTL
Io= 2800 mA
Io= 4200 mA
EUD-240S670DTL
Io= 4450 mA
Io= 6700 mA
Efficiency at 277 Vac input:
EUD-240S105DTL
Io= 700 mA
Io= 1050 mA
EUD-240S210DTL
Io= 1400 mA
Io= 2100 mA
EUD-240S420DTL
Io= 2800 mA
Io= 4200 mA
EUD-240S670DTL
Io= 4450 mA
Io= 6700 mA
Notes
Measured at 100%load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 100%load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 100%load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 230Vac/50Hz; Dimming off
Measured at 220Vac input, 80%Load and
25C ambient temperature (MIL-HDBK217F)
Measured at 220Vac input, 80%Load and
85C case temperature; See lifetime vs. Tc
curve for the details
4 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-240SxxxDTL
240W Programmable Driver with Ultra Long Lifetime
Rev. B
General Specifications (Continued)
Parameter
Min.
Dimensions
Inches (L × W × H)
Millimeters (L × W × H)
Net Weight
Typ.
Max.
With mounting ear
9.68 × 2.66 × 1.56
246 × 67.5 × 39.7
8.86 × 2.66 × 1.56
225 × 67.5 × 39.7
-
Notes
1300 g
-
Note: All specifications are typical at 25C unless otherwise stated.
Dimming Specifications
Parameter
Absolute Maximum Voltage
on the Vdim (+) Pin
Source Current on Vdim (+)
Pin
Min.
Typ.
Max.
-20 V
-
20 V
200 uA
300 uA
450 uA
EUD-240S105DTL
EUD-240S210DTL
EUD-240S420DTL
EUD-240S670DTL
10%Ioset
-
Ioset
EUD-240S105DTL
EUD-240S210DTL
EUD-240S420DTL
EUD-240S670DTL
70 mA
140 mA
280 mA
445 mA
-
Ioset
0V
-
10 V
Dim off Voltage
0.35 V
0.5 V
0.65 V
Dim on Voltage
0.55 V
0.7 V
0.85 V
-
0.2 V
-
PWM_in High Level
3V
-
10 V
PWM_in Low Level
-0.3 V
-
0.6 V
PWM_in Frequency Range
200 Hz
-
3 KHz
PWM_in Duty Cycle
1%
-
99%
PWM Dimming off (Positive
Logic)
2%
5%
8%
PWM Dimming on (Positive
Logic)
4%
7%
10%
92%
95%
98%
90%
93%
96%
-
2%
-
Dimming
Output
Range
Recommended Dimming
Input Range
Hysteresis
PWM Dimming off ( Negative
Logic)
PWM Dimming on ( Negative
Logic)
Hysteresis
Notes
Vdim(+) = 0 V
700 mA ≤ Ioset ≤ 1050 mA
1400 mA ≤ Ioset ≤ 2100 mA
2800 mA ≤ Ioset ≤ 4200 mA
4450 mA ≤ Ioset ≤ 6700 mA
70 mA ≤ Ioset ＜ 700 mA
140 mA ≤ Ioset ＜ 1400 mA
280 mA ≤ Ioset ＜ 2800 mA
445 mA ≤ Ioset ＜ 4450 mA
Default 0-10V dimming mode.
Dimming mode set to PWM in PC
interface.
Note: All specifications are typical at 25C unless otherwise stated.
5 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-240SxxxDTL
240W Programmable Driver with Ultra Long Lifetime
Rev. B
Safety & EMC Compliance
Safety Category
UL/CUL
Standard
UL8750,CAN/CSA-C22.2 No. 250.13
CE
EN 61347-1, EN61347-2-13
KS
KS C 7655
EMI Standards
(1)
EN 55015
Notes
Conducted emission Test & Radiated emission Test
EN 61000-3-2
Harmonic current emissions
EN 61000-3-3
Voltage fluctuations & flicker
ANSI C63.4 Class B
(1)
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: [1] this device may not cause harmful interference, and [2] this
device must accept any interference received, including interference that may cause
undesired Operation.
EMS Standards
Notes
EN 61000-4-2
Electrostatic Discharge(ESD): 8kV air discharge, 4kV contact discharge
EN 61000-4-3
Radio-Frequency Electromagnetic Field Susceptibility Test-RS
EN 61000-4-4
Electrical Fast Transient/Burst-EFT
EN 61000-4-5
Surge Immunity Test: AC Power Line: line to line 6kV, line to earth 10kV
EN 61000-4-6
Conducted Radio Frequency Disturbances test-CS
EN 61000-4-8
Power Frequency Magnetic Field Test
EN 61000-4-11
Voltage Dips
EN 61547
Electromagnetic Immunity Requirements Applies To Lighting Equipment
(2)
Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it
depends also on the other devices connected to the driver and on the fixture itself.
(2)To perform electric strength (hi-pot) testing, the “GDT ground disconnect” (nut and metal lock sheet) on the
driver end-cap should be removed temporarily to prevent the internal gas discharge tube from conducting (as
allowed by IEC 60598-1 Clause 10.2). After testing is completed, these items must be reinstalled to restore
line-to-earth surge protection and secure the end cap.
6 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-240SxxxDTL
240W Programmable Driver with Ultra Long Lifetime
Rev. B
Lifetime vs. Case Temperature
Inrush Current Waveform
Efficiency vs. Load
EUD-240S105DTL(Io=700mA)
EUD-240S105DTL(Io=1050mA)
7 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-240SxxxDTL
Rev. B
240W Programmable Driver with Ultra Long Lifetime
EUD-240S210DTL(Io=1400mA)
EUD-240S210DTL(Io=2100mA)
EUD-240S420DTL(Io=2800mA)
EUD-240S420DTL(Io=4200mA)
EUD-240S670DTL(Io=4450mA)
EUD-240S670DTL(Io=6700mA)
8 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-240SxxxDTL
240W Programmable Driver with Ultra Long Lifetime
Rev. B
Power Factor
Total Harmonic Distortion
Protection Functions
Parameter
External
Thermal
Protection
NTC
Min.
Typ.
Max.
R1
-
7.81 kOhm
-
When R_NTC falls below R1, External
Thermal Protection is triggered, reducing
output current until R2 is reached.
R2
-
4.16 kOhm
-
When R_NTC is less than R2, output
current is reduced to the programmed
“Protection Current Floor.”
10%Ioset
60%Ioset
100%Ioset
10%Ioset>Iomin (default setting is 60%)
Iomin
60%Ioset
100%Ioset
10%Ioset≤Iomin (default setting is 60%)
Protection
Current Floor
Notes
Over Temperature Protection
Decreases output current, returning to normal after over temperature is removed.
Short Circuit Protection
Auto Recovery. No damage will occur when any output is short circuited. The output
shall return to normal when the fault condition is removed.
Over Voltage Protection
Limits output voltage at no load and in case the normal voltage limit fails.
9 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-240SxxxDTL
240W Programmable Driver with Ultra Long Lifetime
Rev. B
Dimming
0-10V Dimming
The recommended implementation of the dimming control is provided below.
V+(RED)
L
V-(BLU)
Vac
N
Inventronics
LED Driver
OTP+(PINK)
OTP-(BLU/WHT)
Vaux(BLK/WHT)
Dim+(PUR)
G
0 (1)-10V
Dimmer
Dim-(GRY)
Implementation 1: DC Input
Notes:
1. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like
resistors and zener.
2. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
3. If 0-10V dimming is not used, Dim + should be open.
PWM Dimming
V+(RED)
L
V-(BLU)
Vac
N
Inventronics
LED Driver
G
OTP+(PINK)
OTP-(BLU/WHT)
Vaux(BLK/WHT)
Dim+(PUR)
Dim-(GRY)
PWM
Signal
Implementation 2: Positive logic
10 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-240SxxxDTL
240W Programmable Driver with Ultra Long Lifetime
Rev. B
V+(RED)
L
V-(BLU)
Vac
N
Inventronics
LED Driver
G
OTP+(PINK)
OTP-(BLU/WHT)
Vaux(BLK/WHT)
Dim+(PUR)
Dim-(GRY)
PWM
Signal
Implementation 3: Negative logic
Notes:
1. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
2. If PWM dimming is not used, Dim + should be open.
3. When PWM negative logic dimming mode and Dim+ is open, the driver will output minimum current.
Time Dimming
Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self AdaptingPercentage and Traditional Timer.
Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two
days (if difference
工商网监
湘ICP备2023018690号
