`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
Features
Innovative Design with No Electrolytic Capacitors
Ultra Long Lifetime: Greater than 100,000 hrs at 85C Case
Temperature
Full Power at Wide Output Current Range (Constant Power)
Thermal Sensing and Protection for LED Module
0-10V/PWM/Timer Dimmable (3 Timer Modes )
Dim-to-Off with Standby Power ≤ 0.5 W
Always-on Auxiliary Power: 12Vdc, 200mA
Output Lumen Compensation
Input Surge Protection: 6kV line-line, 10kV line-earth
All-Around Protection: OVP, SCP, OTP
Waterproof (IP67) and UL Dry / Damp / Wet Location
SELV Output
TYPE HL, for use in a Class I, Division 2 hazardous
(Classified) location
10 Years Warranty
Description
The EUD-150SxxxDTL series is a novel 150W design that has removed the use of Electrolytic capacitors to
extend lifetime at elevated temperatures. It is a constant-current, programmable LED driver that operates from
90-305 Vac input with excellent power factor. Created for many lighting applications including high bay, tunnel
and roadway, it provides a dim-to-off mode with low standby power. The high efficiency of these drivers and
compact metal case enables them to run cooler, significantly improving reliability and extending product life. To
ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and
over temperature.
Models
Adjustable
Output
Current
Range
45-700mA
Full-Power
Current
Range (1)
450-700mA
Default
Output
Current
530 mA
70-1050mA 700-1050mA 700 mA
140-2100mA 1400-2100mA 1400 mA
245-3500mA 2450-3500mA 3150 mA
385-5600mA 3850-5600mA 4200 mA
Input
Voltage
Range(2)
90~305Vac
127~300Vdc
90~305Vac
127~300Vdc
90~305Vac
127~300Vdc
90~305Vac
127~300Vdc
90~305Vac
127~300Vdc
Output
Voltage
Range
Power Factor
Max.
Typical
Output Efficiency
120Vac 220Vac
Power
(3)
Model Number
(5)
117~333Vdc 150 W
93.0%
0.98
0.96
EUD-150S070DTL
75~214Vdc 150 W
93.0%
0.98
0.96
EUD-150S105DTL
38~107Vdc 150 W
92.5%
0.98
0.96
EUD-150S210DTL
(4)
22 ~ 61Vdc 150 W
92.0%
0.98
0.96
EUD-150S350DTL
(4)
14 ~ 39Vdc 150 W
91.0%
0.98
0.96
EUD-150S560DTL
(4)
Notes: (1) Output current range with constant power at 150W
(2) UL, FCC certified input voltage range: 100-277Vac or 127-300Vdc; otherwise: 100-240Vac or 127-250Vdc
(except KS)
(3) Measured at 100% load and 220Vac input (see below “General Specifications” for details).
(4) SELV Output.
(5) All the models are certificated to KS，except EUD-150S070DTL
1 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
I-V Operating Area
EUD-150S070DTL
EUD-150S105DTL
EUD-150S210DTL
EUD-150S350DTL
EUD-150S560DTL
2 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
Input Specifications
Parameter
Min.
Typ.
Max.
Notes
Input Voltage
90 Vac
-
305 Vac
Input Frequency
47 Hz
-
63 Hz
-
-
0.75 MIU
UL8750; 277Vac/ 60Hz
-
-
0.70 mA
IEC60598-1; 240Vac/ 60Hz
-
-
1.80 A
Measured at 100%load and 100 Vac input.
-
-
0.80 A
Measured at 100%load and 220 Vac input.
-
-
0.70 A s
0.90
-
-
THD
-
-
20%
THD
-
-
10%
At 220-240Vac, 50-60Hz, 75%-100% Load
(112.5-150W)
Min.
Typ.
Max.
Notes
-5%Ioset
-
5%Ioset
45 mA
70 mA
140 mA
245 mA
385 mA
-
700 mA
1050 mA
2100 mA
3500 mA
5600 mA
450 mA
700 mA
1400 mA
2450 mA
3850 mA
-
700 mA
1050 mA
2100 mA
3500 mA
5600 mA
-
8%Iomax
15%Iomax
-
2%Iomax
-
Startup Overshoot Current
-
-
10%Iomax
No Load Output Voltage
EUD-150S070DTL
EUD-150S105DTL
EUD-150S210DTL
EUD-150S350DTL
EUD-150S560DTL
-
-
350 V
230 V
117 V
68 V
46 V
Line Regulation
-
-
±0.5%
127~300 Vdc
Leakage Current
Input AC Current
2
Inrush Current(I t)
PF
2
At 220Vac input, 25C Cold Start,
Duration=432 μs, 10%Ipk-10%Ipk. See
Inrush Current Waveform for the details.
At 100-277Vac, 50-60Hz, 70%-100% Load
(105-150W)
Output Specifications
Parameter
Output Current Tolerance
Output Current Setting(Ioset)
Range
EUD-150S070DTL
EUD-150S105DTL
EUD-150S210DTL
EUD-150S350DTL
EUD-150S560DTL
Output Current Setting Range
with Constant Power
EUD-150S070DTL
EUD-150S105DTL
EUD-150S210DTL
EUD-150S350DTL
EUD-150S560DTL
Total Output Current Ripple
(pk-pk)
Output Current Ripple at
< 200 Hz (pk-pk)
At 100%load
At 100%load, 20 MHz BW
At 100%load. Only this component of ripple
is associated with visible flicker.
At 100%load
Measured at 100%load
3 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
Output Specifications (Continued)
Parameter
Min.
Typ.
Max.
-
-
±1.5%
-
-
1.0 s
-
-
0.5 s
-
0.03%/C
-
12V Auxiliary Output Voltage
10.8 V
12 V
13.2 V
12V Auxiliary Output Source
Current
0 mA
-
200 mA
Load Regulation
Turn-on Delay Time
Temperature Coefficient of
Ioset
Notes
Measured at 120Vac input, 70%-100%
Load
Measured at 220Vac input, 70%-100%
Load
Case temperature = 0C ~Tc max
Return terminal is “Dim−“
Note: All specifications are typical at 25C unless otherwise stated.
General Specifications
Parameter
Efficiency at 120 Vac input:
EUD-150S070DTL
Io=450 mA
Io=700 mA
EUD-150S105DTL
Io=700 mA
Io=1050 mA
EUD-150S210DTL
Io=1400 mA
Io=2100 mA
EUD-150S350DTL
Io=2450 mA
Io=3500 mA
EUD-150S560DTL
Io=3850 mA
Io=5600 mA
Efficiency at 220 Vac input:
EUD-150S070DTL
Io=450 mA
Io=700 mA
EUD-150S105DTL
Io=700 mA
Io=1050 mA
EUD-150S210DTL
Io=1400 mA
Io=2100 mA
EUD-150S350DTL
Io=2450 mA
Io=3500 mA
EUD-150S560DTL
Io=3850 mA
Io=5600 mA
Min.
Typ.
Max.
89.0%
87.5%
91.0%
89.5%
-
88.5%
87.5%
90.5%
89.5%
-
88.0%
86.5%
90.0%
88.5%
-
87.5%
86.0%
89.5%
88.0%
-
87.0%
85.0%
89.0%
87.0%
-
91.0%
90.0%
93.0%
92.0%
-
91.0%
90.0%
93.0%
92.0%
-
90.5%
89.0%
92.5%
91.0%
-
90.0%
88.5%
92.0%
90.5%
-
89.0%
87.0%
91.0%
89.0%
-
Notes
Measured at 100%load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 100%load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
4 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
General Specifications (Continued)
Parameter
Min.
Typ.
Max.
91.5%
90.0%
93.5%
92.0%
-
91.5%
90.0%
93.5%
92.0%
-
91.0%
89.0%
93.0%
91.0%
-
90.5%
88.5%
92.5%
90.5%
-
89.5%
87.5%
91.5%
89.5%
-
Standby power
-
-
0.5 W
MTBF
-
240,000
Hours
-
Lifetime
-
100,000
Hours
-
Operating Case Temperature
for Safety Tc_s
-40°C
-
+87°C
Operating Case Temperature
for Warranty Tc_w
-40°C
-
+75°C
Case temperature for 10 years warranty.
Please see Inventronics EUD-DTL
Warranty Statement for complete details.
Storage Temperature
-40°C
-
+85°C
Humidity: 5%RH to 100%RH
Efficiency at 277 Vac input:
EUD-150S070DTL
Io=450 mA
Io=700 mA
EUD-150S105DTL
Io=700 mA
Io=1050 mA
EUD-150S210DTL
Io=1400 mA
Io=2100 mA
EUD-150S350DTL
Io=2450 mA
Io=3500 mA
EUD-150S560DTL
Io=3850 mA
Io=5600 mA
Dimensions
Inches (L × W × H)
Millimeters (L × W × H)
Net Weight
Measured at 100%load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 230Vac/50Hz; Dimming off
Measured at 220Vac input, 80%Load and
25C ambient temperature (MIL-HDBK217F)
Measured at 220Vac input, 80%Load and
85C case temperature; See lifetime vs. Tc
curve for the details
With mounting ear
8.23 × 2.66 × 1.56
209 × 67.5 × 39.7
7.41 × 2.66 × 1.56
188 × 67.5 × 39.7
-
Notes
1000 g
-
Note: All specifications are typical at 25C unless otherwise stated.
Dimming Specifications
Parameter
Absolute Maximum Voltage
on the Vdim (+) Pin
Source Current on Vdim (+)
Pin
Dimming
Output
Range
Min.
Typ.
Max.
-20 V
-
20 V
200 uA
300 uA
450 uA
EUD-150S070DTL
EUD-150S105DTL
EUD-150S210DTL
EUD-150S350DTL
EUD-150S560DTL
10%Ioset
-
Ioset
EUD-150S070DTL
EUD-150S105DTL
EUD-150S210DTL
EUD-150S350DTL
EUD-150S560DTL
45 mA
70 mA
140 mA
245 mA
385 mA
-
Ioset
Notes
Vdim(+) = 0 V
450 mA ≤ Ioset ≤ 700 mA
700 mA ≤ Ioset ≤ 1050 mA
1400 mA ≤ Ioset ≤ 2100 mA
2450 mA ≤ Ioset ≤ 3500 mA
3850 mA ≤ Ioset ≤ 5600 mA
45 mA ≤ Ioset ＜ 450 mA
70 mA ≤ Ioset ＜ 700 mA
140 mA ≤ Ioset ＜ 1400 mA
245 mA ≤ Ioset ＜ 2450 mA
385 mA ≤ Ioset ＜ 3850 mA
5 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
Dimming Specifications (Continued)
Parameter
Min.
Typ.
Max.
0V
-
10 V
Dim off Voltage
0.35 V
0.5 V
0.65 V
Dim on Voltage
0.55 V
0.7 V
0.85 V
-
0.2 V
-
PWM_in High Level
3V
-
10 V
PWM_in Low Level
-0.3 V
-
0.6 V
PWM_in Frequency Range
200 Hz
-
3 KHz
1%
-
99%
2%
5%
8%
4%
7%
10%
92%
95%
98%
90%
93%
96%
-
2%
-
Recommended Dimming
Input Range
Hysteresis
PWM_in Duty Cycle
PWM Dimming off (Positive
Logic)
PWM Dimming on (Positive
Logic)
PWM Dimming off ( Negative
Logic)
PWM Dimming on ( Negative
Logic)
Hysteresis
Notes
Default 0-10V dimming mode.
Dimming mode set to PWM in PC interface.
Note: All specifications are typical at 25C unless otherwise stated.
Safety & EMC Compliance
Safety Category
UL/CUL
Standard
UL8750,CAN/CSA-C22.2 No. 250.13
CE
EN 61347-1, EN61347-2-13
KS
KS C 7655
EMI Standards
(1)
EN 55015
Notes
Conducted emission Test & Radiated emission Test
EN 61000-3-2
Harmonic current emissions
EN 61000-3-3
Voltage fluctuations & flicker
ANSI C63.4 Class B
(1)
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: [1] this device may not cause harmful interference, and [2] this device
must accept any interference received, including interference that may cause undesired
Operation.
EMS Standards
EN 61000-4-2
Notes
Electrostatic Discharge(ESD): 8kV air discharge, 4kV contact discharge
6 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
Safety & EMC Compliance (Continued)
EMS Standards
Notes
EN 61000-4-3
Radio-Frequency Electromagnetic Field Susceptibility Test-RS
EN 61000-4-4
Electrical Fast Transient/Burst-EFT
EN 61000-4-5
Surge Immunity Test: AC Power Line: line to line 6kV, line to earth 10kV
EN 61000-4-6
Conducted Radio Frequency Disturbances test-CS
EN 61000-4-8
Power Frequency Magnetic Field Test
EN 61000-4-11
Voltage Dips
EN 61547
(2)
Electromagnetic Immunity Requirements Applies To Lighting Equipment
Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it
depends also on the other devices connected to the driver and on the fixture itself.
(2)To perform electric strength (hi-pot) testing, the “GDT ground disconnect” (nut and metal lock sheet) on the
driver end-cap should be removed temporarily to prevent the internal gas discharge tube from conducting (as
allowed by IEC 60598-1 Clause 10.2). After testing is completed, these items must be reinstalled to restore
line-to-earth surge protection and secure the end cap.
Lifetime vs. Case Temperature
Inrush Current Waveform
7 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
Efficiency vs. Load
EUD-150S070DTL(Io=450mA)
EUD-150S070DTL(Io=700mA)
EUD-150S105DTL(Io=700mA)
EUD-150S105DTL(Io=1050mA)
8 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
EUD-150S210DTL(Io=1400mA)
EUD-150S210DTL(Io=2100mA)
EUD-150S350DTL(Io=2450mA)
EUD-150S350DTL(Io=3500mA)
EUD-150S560DTL(Io=3850mA)
EUD-150S560DTL(Io=5600mA)
9 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
Power Factor
Total Harmonic Distortion
Protection Functions
Parameter
External
Thermal
Protection
NTC
Min.
Typ.
Max.
R1
-
7.81 kOhm
-
R2
-
4.16 kOhm
-
10%Ioset
60%Ioset
100%Ioset
10%Ioset>Iomin (default setting is 60%)
Iomin
60%Ioset
100%Ioset
10%Ioset≤Iomin (default setting is 60%)
Protection
Current Floor
Notes
When R_NTC falls below R1, External
Thermal Protection is triggered, reducing
output current until R2 is reached.
When R_NTC is less than R2, output
current is reduced to the programmed
“Protection Current Floor.”
Over Temperature Protection
Decreases output current, returning to normal after over temperature is removed.
Short Circuit Protection
Auto Recovery. No damage will occur when any output is short circuited. The output
shall return to normal when the fault condition is removed.
Over Voltage Protection
Limits output voltage at no load and in case the normal voltage limit fails.
10 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
Dimming
0-10V Dimming
The recommended implementation of the dimming control is provided below.
V+(RED)
L
V-(BLU)
Vac
N
Inventronics
LED Driver
G
OTP+(PINK)
OTP-(BLU/WHT)
Vaux(BLK/WHT)
Dim+(PUR)
0 (1)-10V
Dimmer
Dim-(GRY)
Implementation 1: DC Input
Notes:
1. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like
resistors and zener.
2. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
3. If 0-10V dimming is not used, Dim + should be open.
PWM Dimming
V+(RED)
L
V-(BLU)
Vac
N
Inventronics
LED Driver
G
OTP+(PINK)
OTP-(BLU/WHT)
Vaux(BLK/WHT)
Dim+(PUR)
Dim-(GRY)
PWM
Signal
Implementation 2: Positive logic
11 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
`
EUD-150SxxxDTL
150W Programmable Driver with Ultra Long Lifetime
Rev. B
V+(RED)
L
V-(BLU)
Vac
N
Inventronics
LED Driver
G
OTP+(PINK)
OTP-(BLU/WHT)
Vaux(BLK/WHT)
Dim+(PUR)
Dim-(GRY)
PWM
Signal
Implementation 3: Negative logic
Time Dimming
Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self AdaptingPercentage and Traditional Timer.
Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two
days (if difference
工商网监
湘ICP备2023018690号
