EUM-680SxxxMx
680W Programmable Driver with INV Digital Dimming
Rev.A
Features
Ultra High Efficiency (Up to 96.0%)
Full Power at Wide Output Current Range (Constant Power)
Adjustable Output Current (AOC)with Programmability
Isolated 0-10V/PWM/3-Timer-Modes Dimmable
INV Digital Dimming, UART Based Communication Protocol
Dim-to-Off with Standby Power ≤ 0.5 W
Minimum Dimming Level with 5% or 10% Selectable
Maximum Dimming Level with 9V or 10V Selectable
Fade Time Adjustable
Always-on Auxiliary Power: 12Vdc, 250mA
Low inrush current
Output Lumen Compensation
End-of-Life Indicator
Input Surge Protection: DM 6kV, CM 10kV
All-Around Protection: IOVP,IUVP, OVP, SCP, OTP
IP66 / IP67 and UL Dry / Damp / Wet Location
TYPE HL, for use in a Class I, Division 2 hazardous (Classified)
location
5 Years Warranty
Description
The EUM-680SxxxMx series is a 680W, constant-current, programmable and IP66/IP67 rated LED driver that
operates from 90-305Vac input with excellent power factor. Created for many lighting applications including high
mast, sports, UV-LED, aquaculture and horticulture, etc. It provides an auxiliary voltage and dim-to-off
functionality for powering low voltage, wireless controls. The dimming control supports 0-10V dimming as well as
two-way communication via Digital Dimming, a UART based communication protocol. The high efficiency of
these drivers and compact metal case enables them to run cooler, significantly improving reliability and
extending product life. To ensure trouble-free operation, protection is provided against input surge, input under
voltage, input over voltage, output over voltage, short circuit, and over temperature.
Models
Adjustable
Full-Power Default
Output
Current Output
Current
Range(1) Current
Range
Input
Voltage
Range(2)
Output
Voltage
Range
Typical
Max. Typical
Power Factor
Output Efficiency
Power
(3)
120Vac 220Vac
Model Number
0.125-1.7A 1.25-1.7A
1.7 A
90~305Vac
200 ~ 544Vdc 680 W
127~300Vdc
95.5%
0.99
0.96
EUM-680S170Mx
0.18-2.4A
1.8-2.4A
2.1 A
90~305Vac
141.5 ~ 378Vdc 680 W
127~300Vdc
94.5%
0.99
0.96
EUM-680S240Mx
0.26-3.5A
2.6-3.5A
3.5 A
90~305Vac
97.1 ~ 262Vdc 680 W
127~300Vdc
95.0%
0.99
0.96
EUM-680S350Mx
0.42-5.6A
4.2-5.6A
5.6 A
90~305Vac
60.7 ~ 163Vdc 680 W
127~300Vdc
94.5%
0.99
0.96
EUM-680S560Mx
0.63-8.4A
6.3-8.4A
8.4 A
90~305Vac
40.4 ~ 108Vdc 680 W
127~300Vdc
95.0%
0.99
0.96
EUM-680S840Mx(4)
0.96
EUM-680S15AMx(4)
90~305Vac
0.99
22.6 ~ 54Vdc 680 W 95.5%
127~300Vdc
Notes: (1) Output current range with constant power at 680W.
(2) Certified input voltage range: UL, FCC, CB 100-277Vac; otherwise 100-240Vac
1.26-15.0A 12.6-15.0A 15.0 A
1 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
680W Programmable Driver with INV Digital Dimming
Rev.A
(3) Measured at 100% load and 220Vac input (see below “General Specifications” for details).
(4) SELV output
(5) x = G are UL Recognized, ENEC and CCC, etc. models; x = T are UL Class P models.
I-V Operating Area
EUM-680S170Mx
EUM-680S240Mx
EUM-680S350Mx
EUM-680S560Mx
EUM-680S840Mx
EUM-680S15AMx
2 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
680W Programmable Driver with INV Digital Dimming
Rev.A
Input Specifications
Parameter
Min.
Typ.
Max.
Input AC Voltage
90 Vac
-
305 Vac
Input DC Voltage
127 Vdc
-
300 Vdc
Input Frequency
47 Hz
-
63 Hz
-
-
0.75 MIU
UL8750; 277Vac/ 60Hz
0.70 mA
IEC60598-1; 240Vac/ 60Hz,
Leakage Current
Notes
-
-
6.9 A
Measured at 100% load and 120 Vac input.
-
-
3.6 A
Measured at 100% load and 220 Vac input.
-
-
2.1 A2s
0.90
-
-
-
-
20%
Input AC Current
At 220Vac input, 25℃ cold start,
Inrush Current(I2t)
PF
THD
THD
duration=14.2 ms, 10%Ipk-10%Ipk. See
Inrush Current Waveform for the details.
At 100-277Vac, 50-60Hz, 60%-100% Load
(408 - 680W)
10%
At 220-240Vac, 50-60Hz, 75%-100% Load
(510 - 680W)
Notes
Output Specifications
Parameter
Output Current Tolerance
Output Current Setting(Ioset
Range
EUM-680S170Mx
EUM-680S240Mx
EUM-680S350Mx
EUM-680S560Mx
EUM-680S840Mx
EUM-680S15AMx
Output Current Setting Range
with Constant Power
EUM-680S170Mx
EUM-680S240Mx
EUM-680S350Mx
EUM-680S560Mx
EUM-680S840Mx
EUM-680S15AMx
Total Output Current Ripple
(pk-pk)
Output Current Ripple at
< 200 Hz (pk-pk)
Startup Overshoot Current
Min.
Typ.
Max.
-5%Ioset
-
5%Ioset
125 mA
180 mA
260 mA
420 mA
630 mA
1260 mA
-
1700 mA
2400 mA
3500 mA
5600 mA
8400 mA
15000 mA
1250 mA
1800 mA
2600 mA
4200 mA
6300 mA
12600 mA
-
1700 mA
2400 mA
3500 mA
5600 mA
8400 mA
15000 mA
-
5%Iomax
10%Iomax
100% load, 20 MHz BW
-
-
2%Iomax
70%-100% load
-
-
10%Iomax
100% load
3 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
100% load
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
680W Programmable Driver with INV Digital Dimming
Rev.A
Output Specifications (Continued)
Parameter
Min.
Typ.
Max.
No Load Output Voltage
EUM-680S170Mx
EUM-680S240Mx
EUM-680S350Mx
EUM-680S560Mx
EUM-680S840Mx
EUM-680S15AMx
-
-
600 V
420 V
300 V
200 V
120 V
60 V
Line Regulation
-
-
±0.5%
Load Regulation
-
-
±3.0%
Turn-on Delay Time
-
-
0.5 s
Temperature Coefficient of
Ioset
-
0.03%/C
-
12V Auxiliary Output Voltage
10.8 V
12 V
13.2 V
12V Auxiliary Output Source
Current
0 mA
-
250 mA
12V Auxiliary Output Transient
Peak Current@6W
-
-
500 mA
12V Auxiliary Output Transient
Peak Current@10W
-
-
850 mA
Min.
Typ.
Max.
92.0%
92.0%
94.0%
94.0%
-
90.5%
90.0%
92.5%
92.0%
-
90.0%
90.5%
92.0%
92.5%
-
90.0%
90.0%
92.0%
92.0%
-
90.5%
90.5%
92.5%
92.5%
-
92.0%
92.0%
94.0%
94.0%
-
Notes
100% load
Measured at 120-277Vac input, 60%-100%
Load
Case temperature = 0C ~Tc max
Return terminal is “Dim−“
500mA peak for a maximum duration of 2.2
ms in a 6.0ms period during which time the
average should not exceed 250mA.
850mA peak for a maximum duration of 1.3
ms in a 5.2ms period during which time the
average should not exceed 250mA.
General Specifications
Parameter
Efficiency at 120 Vac input:
EUM-680S170Mx
Io= 1250 mA
Io= 1700 mA
EUM-680S240Mx
Io= 1800 mA
Io= 2400 mA
EUM-680S350Mx
Io= 2600 mA
Io= 3500 mA
EUM-680S560Mx
Io= 4200 mA
Io= 5600 mA
EUM-680S840Mx
Io= 6300 mA
Io= 8400 mA
EUM-680S15AMx
Io= 12600 mA
Io= 15000 mA
4 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Notes
Measured at 100% load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
680W Programmable Driver with INV Digital Dimming
Rev.A
General Specifications (Continued)
Parameter
Min.
Typ.
Max.
93.5%
93.5%
95.5%
95.5%
-
92.5%
92.5%
94.5%
94.5%
-
92.5%
93.0%
94.5%
95.0%
-
92.5%
92.5%
94.5%
94.5%
-
93.0%
93.0%
95.0%
95.0%
-
93.5%
93.5%
95.5%
95.5%
-
93.5%
93.5%
95.5%
95.5%
-
93.0%
93.0%
95.0%
95.0%
-
93.0%
93.5%
95.0%
95.5%
-
93.0%
93.0%
95.0%
95.0%
-
93.0%
93.0%
95.0%
95.0%
-
94.0%
94.0%
96.0%
96.0%
-
Standby Power
-
-
0.5 W
MTBF
-
201,000
Hours
-
-
107,000
Hours
-
-
67,000
Hours
-
-40°C
-
+90°C
-40°C
-
+80°C
-40°C
-
+85°C
Efficiency at 220 Vac input:
EUM-680S170Mx
Io= 1250 mA
Io= 1700 mA
EUM-680S240Mx
Io= 1800 mA
Io= 2400 mA
EUM-680S350Mx
Io= 2600 mA
Io= 3500 mA
EUM-680S560Mx
Io= 4200 mA
Io= 5600 mA
EUM-680S840Mx
Io= 6300 mA
Io= 8400 mA
EUM-680S15AMx
Io= 12600 mA
Io= 15000 mA
Efficiency at 277 Vac input:
EUM-680S170Mx
Io= 1250 mA
Io= 1700 mA
EUM-680S240Mx
Io= 1800 mA
Io= 2400 mA
EUM-680S350Mx
Io= 2600 mA
Io= 3500 mA
EUM-680S560Mx
Io= 4200 mA
Io= 5600 mA
EUM-680S840Mx
Io= 6300 mA
Io= 8400 mA
EUM-680S15AMx
Io= 12600 mA
Io= 15000 mA
Lifetime
Operating Case Temperature
for Safety Tc_s
Operating Case Temperature
for Warranty Tc_w
Storage Temperature
Dimensions
Net Weight
-
3079 g
www.inventronics-co.com
Tel: 86-571-56565800
Measured at 100% load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 230Vac/50Hz; Dimming off
Measured at 220Vac input, 80%Load and
25C ambient temperature (MIL-HDBK217F)
Measured at 220Vac input, 80%Load and
70C case temperature; See lifetime vs. Tc
curve for the details
Measured at 220Vac input, 100%Load and
40C ambient temperature
Case temperature for 5 years warranty
Humidity: 10%RH to 95%RH
Humidity: 5%RH to 100%RH
-
5 / 20
Specifications are subject to changes without notice.
Measured at 100% load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
With mounting ear
10.83 × 5.31 × 1.81
275 ×135 x 46
9.84 × 5.31 × 1.81
250 × 135 x 46
Inches (L × W × H)
Millimeters (L × W × H)
Notes
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
680W Programmable Driver with INV Digital Dimming
Rev.A
Dimming Specifications
Parameter
Min.
Typ.
Max.
Absolute Maximum Voltage on
the Vdim (+) Pin
-20 V
-
20 V
Source Current on Vdim (+)Pin
200 uA
300 uA
450 uA
EUM-680S170Mx
EUM-680S240Mx
EUM-680S350Mx
EUM-680S560Mx
EUM-680S840Mx
EUM-680S15AMx
10%Ioset
-
Ioset
125 mA
180 mA
260 mA
420 mA
630 mA
1260 mA
-
Ioset
5%Ioset
-
Ioset
63 mA
90 mA
130 mA
210 mA
315 mA
630 mA
-
Ioset
0V
-
10 V
Dim off Voltage
0.35 V
0.5 V
0.65 V
Dim on Voltage
0.55 V
0.7 V
0.85 V
-
0.2 V
-
PWM_in High Level
3V
-
10 V
PWM_in Low Level
-0.3 V
-
0.6 V
PWM_in Frequency Range
200 Hz
-
3 KHz
1%
-
99%
3%
5%
8%
5%
7%
10%
92%
95%
97%
90%
93%
95%
-
2%
-
Dimming
Output
Range with
10%-100% EUM-680S170Mx
EUM-680S240Mx
(Default)
EUM-680S350Mx
EUM-680S560Mx
EUM-680S840Mx
EUM-680S15AMx
EUM-680S170Mx
EUM-680S240Mx
EUM-680S350Mx
EUM-680S560Mx
EUM-680S840Mx
EUM-680S15AMx
Dimming
Output
Range with
EUM-680S170Mx
5%-100%
EUM-680S240Mx
(Settable)
EUM-680S350Mx
EUM-680S560Mx
EUM-680S840Mx
EUM-680S15AMx
Recommended Dimming Input
Range
Hysteresis
PWM_in Duty Cycle
PWM Dimming off (Positive
Logic)
PWM Dimming on (Positive
Logic)
PWM Dimming off ( Negative
Logic)
PWM Dimming on ( Negative
Logic)
Hysteresis
6 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Notes
Vdim(+) = 0 V
1250 mA ≤ Ioset ≤ 1700 mA
1800 mA ≤ Ioset ≤ 2400 mA
2600 mA ≤ Ioset ≤ 3500 mA
4200 mA ≤ Ioset ≤ 5600 mA
6300 mA ≤ Ioset ≤ 8400 mA
12600 mA ≤ Ioset ≤ 15000 mA
125 mA ≤ Ioset ＜ 1250 mA
180 mA ≤ Ioset ＜1800 mA
260 mA ≤ Ioset ＜ 2600 mA
420 mA ≤ Ioset ＜ 4200 mA
630 mA ≤ Ioset ＜ 6300 mA
1260 mA ≤ Ioset ＜ 12600 mA
1250 mA ≤ Ioset ≤ 1700 mA
1800 mA ≤ Ioset ≤ 2400 mA
2600 mA ≤ Ioset ≤ 3500 mA
4200 mA ≤ Ioset ≤ 5600 mA
6300 mA ≤ Ioset ≤ 8400 mA
12600 mA ≤ Ioset ≤ 15000 mA
125 mA ≤ Ioset ＜ 1250 mA
180 mA ≤ Ioset ＜1800 mA
260 mA ≤ Ioset ＜ 2600 mA
420 mA ≤ Ioset ＜ 4200 mA
630 mA ≤ Ioset ＜ 6300 mA
1260 mA ≤ Ioset ＜ 12600 mA
Default 0-10V dimming mode.
Dimming mode set to PWM in PC interface.
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
Rev.A
680W Programmable Driver with INV Digital Dimming
Safety &EMC Compliance
Safety Category
UL/CUL
Standard
UL8750,CAN/CSA-C22.2 No. 250.13
ENEC & CE
EN 61347-1, EN 61347-2-13
CB
IEC 61347-1, IEC 61347-2-13
CCC
GB 19510.1, GB 19510.14
NOM
NOM-058-SCFI
EMI Standards
EN 55015/GB 17743(1)
Notes
Conducted emission Test &Radiated emission Test
EN 61000-3-2/GB 17625.1
Harmonic current emissions
EN 61000-3-3
Voltage fluctuations & flicker
ANSI C63.4 Class B
FCC Part 15(1)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: [1] this device may not cause harmful interference, and [2] this
device must accept any interference received, including interference that may cause
undesired Operation.
EMS Standards
Notes
EN 61000-4-2
Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge
EN 61000-4-3
Radio-Frequency Electromagnetic Field Susceptibility Test-RS
EN 61000-4-4
Electrical Fast Transient / Burst-EFT
EN 61000-4-5
Surge Immunity Test: AC Power Line: Differential Mode 6 kV, Common Mode 10 kV
EN 61000-4-6
Conducted Radio Frequency Disturbances Test-CS
EN 61000-4-8
Power Frequency Magnetic Field Test
EN 61000-4-11
Voltage Dips
EN 61547
Electromagnetic Immunity Requirements Applies To Lighting Equipment
Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends
also on the other devices connected to the driver and on the fixture itself.
Derating
7 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
Rev.A
680W Programmable Driver with INV Digital Dimming
Lifetime vs. Case Temperature
Inrush Current Waveform
Efficiency vs. Load
EUM-680S170Mx(lo=1250mA)
EUM-680S170Mx(lo=1700mA)
8 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
Rev.A
680W Programmable Driver with INV Digital Dimming
EUM-680S240Mx(lo=1800mA)
EUM-680S240Mx(lo=2400mA)
EUM-680S350Mx(lo=2600mA)
EUM-680S350Mx(lo=3500mA)
EUM-680S560Mx(lo=4200mA)
EUM-680S560Mx(lo=5600mA)
9 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
Rev.A
680W Programmable Driver with INV Digital Dimming
EUM-680S840Mx(lo=6300mA)
EUM-680S840Mx(lo=8400mA)
EUM-680S15AMx(lo=12600mA)
EUM-680S15AMx(lo=15000mA)
Power Factor
10 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
680W Programmable Driver with INV Digital Dimming
Rev.A
Total Harmonic Distortion
Protection Functions
Parameter
Min.
Typ.
Max.
Notes
Over Temperature Protection
Decreases output current, returning to normal after over temperature is removed.
Short Circuit Protection
Auto Recovery. No damage will occur when any output is short circuited. The output
shall return to normal when the fault condition is removed.
Over Voltage Protection
Limits output voltage at no load and in case the normal voltage limit fails.
Input Under
Voltage
Protection
(IUVP)
Input Over
Voltage
Protection
(IOVP)
Input Protection
Voltage
Input Recovery
Voltage
Input Over
Voltage
Protection
Input Over
Voltage
Recovery
Max. of Input
Over Voltage
70 Vac
80 Vac
90 Vac
Turn off the output when the input voltage
falls below protection voltage.
75 Vac
85 Vac
95 Vac
Auto Recovery. The driver will restart when
the input voltage exceeds recovery voltage.
310 Vac
320 Vac
330 Vac
Turn off the output when the input voltage
exceeds protection voltage.
300 Vac
310 Vac
320 Vac
-
-
350 Vac
Auto Recovery. The driver will restart when
the input voltage falls below recovery
voltage.
The driver can survive for 8 hours with
a stable input voltage stress of 350Vac.
Input Under Voltage Protection Diagram
lo
80 Vac
85 Vac
11 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Vin
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
680W Programmable Driver with INV Digital Dimming
Rev.A
Input Over Voltage Protection Diagram
lo
Recovery
Protection
310 Vac
320 Vac
Vin
Dimming
0-10V Dimming
The recommended implementation of the dimming control is provided below.
Implementation 1: Positive logic
12 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
680W Programmable Driver with INV Digital Dimming
Rev.A
Implementation 2: Negative logic
Notes:
1. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
2. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like
zener.
3. When 0-10V negative logic dimming mode and Dim+ is open, the driver will dim to off and be standby.
PWM Dimming
The recommended implementation of the dimming control is provided below.
Implementation 3: Positive logic
13 / 20
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
EUM-680SxxxMx
680W Programmable Driver with INV Digital Dimming
Rev.A
Implementation 4: Negative logic
Notes:
1. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
2. When PWM negative logic dimming mode and Dim+ is open, the driver will dim to off and be standby.
Time Dimming
Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self AdaptingPercentage and Traditional Timer.
Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two
days (if difference
工商网监
湘ICP备2023018690号
