ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
Features
•
Ultra High Efficiency (Up to 95%)
•
Full Power at Wide Output Current Range (Constant Power)
•
Thermal Sensing and Protection for LED Module
•
Isolated 0-10V/PWM/3 Timer-Modes Dimmable
•
Dim-to-Off with Standby Power ≤ 1.5 W
•
Output Lumen Compensation
•
Input Surge Protection: DM 6kV, CM 10kV
•
All-Around Protection: OVP, SCP, OTP
•
IP67 and UL Dry / Damp / Wet Location
•
SELV Output
•
TYPE HL, for Use in a Class I, Division 2 Hazardous
(Classified) Location
•
5 Years Warranty
Description
The ESD-480SxxxDT series is a 480W, constant-current, programmable LED driver that operates from 249-528
Vac input with excellent power factor. It is created for many lighting applications including high bay, high mast,
aquaculture and sports, etc, it provides a dim-to-off mode with low standby power. The high efficiency of these
drivers and compact metal case enables them to run cooler, significantly improving reliability and extending
product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage,
short circuit, and over temperature.
Models
Adjustable
Full-Power Default
Output
Current
Output
Current
Range(1) Current
Range
Input
Voltage
Range(2)
Output
Voltage
Range
Max.
Typical Power Factor
Output Efficiency
277Vac 480Vac
Power
(3)
Model Number
0.105-1.40A 1.05A-1.40A
1.4 A
249~528Vac
171 ~ 457Vdc 480 W
352~500Vdc
95.0%
0.96
0.95
ESD-480S140DT
0.210-2.80A 2.10-2.80A
2.8 A
249~528Vac
86 ~ 228Vdc
352~500Vdc
480 W
94.5%
0.96
0.95
ESD-480S280DT
0.315-4.20A 3.15-4.20A
4.2 A
249~528Vac
57 ~ 152Vdc
352~500Vdc
480 W
94.0%
0.96
0.95
ESD-480S420DT
0.435-5.60A 4.35-5.60A
5.6 A
249~528Vac
43 ~ 110Vdc
352~500Vdc
480 W
93.5%
0.96
0.95
ESD-480S560DT(4)
0.750-10.0A 7.50-10.0A
10.0 A
249~528Vac
352~500Vdc
480 W
93.5%
0.96
0.95
ESD-480S10ADT
24 ~ 64Vdc
(4)
Notes: (1) Output current range with constant power at 480W.
(2) Certified input voltage range: 277-480Vac or 352-500Vdc.
(3) Measured at 100% load and 480Vac input (see below “General Specifications” for details).
(4) SELV output.
1 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25°C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
I-V Operating Area
ESD-480S140DT
ESD-480S280DT
300
(10%Ioset,480/Ioset)
200
(2800,171)
(Ioset,480/Ioset)
60
%
Lo
150
ad
Output Voltage(V)
(2100,228)
10
0%
Lo
ad
(1260,228)
250 (210,228)
(2800,102)
100
(280,86)
50
(Ioset,86)
(2800,86)
Good Performance Area
Allowed Operating Area
Programmed Operating Area
550
2200
0
0
1100
1650
2750
3300
Output Current (mA)
Note: 2100mA
ESD-480S420DT
Ioset
2800mA
ESD-480S560DT
150
(10%Ioset,480/Ioset)
100
(5600,86)
(Ioset,480/Ioset)
60
%
Lo
75
ad
Output Voltage(V)
(4350,110)
10
0%
Lo
ad
(2610,110)
125 (435,110)
(5600,52)
50
(560,43)
25
(Ioset,43)
(5600,43)
Programmed Operating Area
Good Performance Area
Allowed Operating Area
0
0
1100
2200
3300
4400
5500
6600
Output Current (mA)
Note: 4350mA
Ioset
5600mA
ESD-480S10ADT
90
(10%Ioset,480/Ioset)
60
60
(10000,48)
(Ioset,480/Ioset)
%
a
Lo
45
d
Output Voltage(V)
(7500,64)
10
0%
Lo
ad
(4500,64)
(750,64)
75
(10000,29)
30
(1000,24)
15
(Ioset,24)
(10000,24)
Programmed Operating Area
Good Performance Area
Allowed Operating Area
0
0
2000
4000
6000
8000
10000
12000
Output Current (mA)
Note: 7500mA
Ioset
10000mA
2 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25°C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
Input Specifications
Parameter
Min.
Typ.
Max.
Input AC Voltage
249 Vac
-
528 Vac
Input DC Voltage
352 Vdc
Input Frequency
47 Hz
-
63 Hz
-
-
0.75 MIU
-
-
0.70 mA
500 Vdc
Leakage Current
-
-
2.09 A
-
-
1.21 A
-
-
13.8 A s
0.90
-
-
-
-
20%
Min.
Typ.
Max.
-5%Ioset
-
5%Ioset
105 mA
210 mA
315 mA
435 mA
750 mA
-
1400 mA
2800 mA
4200 mA
5600 mA
10000 mA
1050 mA
2100 mA
3150 mA
4350 mA
7500 mA
-
1400 mA
2800 mA
4200 mA
5600 mA
10000 mA
-
5%Iomax
10%Iomax
Output Current Ripple at
< 200 Hz (pk-pk)
-
2%Iomax
-
Startup Overshoot Current
-
-
10%Iomax
No Load Output Voltage
ESD-480S140DT
ESD-480S280DT
ESD-480S420DT
ESD-480S560DT
ESD-480S10ADT
-
-
500 V
280 V
190 V
120 V
80 V
Line Regulation
-
-
±0.5%
Load Regulation
-
-
±1.5%
Input AC Current
2
Inrush Current(I t)
PF
THD
Notes
2
UL8750; 480Vac/60Hz, Grounding
effectively
IEC60598-1; 480Vac/60Hz
Measured at 100% load and 277 Vac
input.
Measured at 100% load and 480 Vac
input.
At 480Vac input, 25℃ cold start,
duration=840 μs, 10%Ipk-10%Ipk. See
Inrush Current Waveform for the details.
At 277-480Vac, 50-60Hz, 60%-100% load
(288-480W)
Output Specifications
Parameter
Output Current Tolerance
Output Current Setting(Ioset)
Range
ESD-480S140DT
ESD-480S280DT
ESD-480S420DT
ESD-480S560DT
ESD-480S10ADT
Output Current Setting Range
with Constant Power
ESD-480S140DT
ESD-480S280DT
ESD-480S420DT
ESD-480S560DT
ESD-480S10ADT
Total Output Current Ripple
(pk-pk)
Notes
At 100% load condition
At 100% load condition, 20 MHz BW
At 100% load condition. Only this
component of ripple is associated with
visible flicker.
At 100% load condition
Measured at 100% load
3 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25°C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
Output Specifications (Continued)
Parameter
Min.
Typ.
Max.
Notes
Turn-on Delay Time
-
-
0.5 s
Measured at 277-480Vac input, 60%-100%
load
Temperature Coefficient of
Ioset
-
0.03%/°C
-
12V Auxiliary Output Voltage
10.8 V
12 V
13.2 V
12V Auxiliary Output Source
Current
0 mA
-
200 mA
Return terminal is “Dim−“
-
-
400 mA
400mA peak for a maximum duration of
300ms in a 2s period during which time the
average should not exceed 200mA.
Min.
Typ.
Max.
Notes
92.0%
91.5%
94.0%
93.5%
-
91.5%
90.5%
93.5%
92.5%
-
91.0%
90.5%
93.0%
92.5%
-
90.5%
90.0%
92.5%
92.0%
-
90.5%
89.0%
92.5%
91.0%
-
92.5%
92.0%
94.5%
94.0%
-
92.0%
91.0%
94.0%
93.0%
-
91.5%
91.0%
93.5%
93.0%
-
91.0%
90.5%
93.0%
92.5%
-
91.0%
89.5%
93.0%
91.5%
-
12V Auxiliary Output Transient
Peak Current
Case temperature = 0°C~Tc max
General Specifications
Parameter
Efficiency at 277 Vac input:
ESD-480S140DT
Io= 1050 mA
Io= 1400 mA
ESD-480S280DT
Io= 2100 mA
Io= 2800 mA
ESD-480S420DT
Io= 3150 mA
Io= 4200 mA
ESD-480S560DT
Io= 4350 mA
Io= 5600 mA
ESD-480S10ADT
Io= 7500 mA
Io= 10000 mA
Efficiency at 347 Vac input:
ESD-480S140DT
Io= 1050 mA
Io= 1400 mA
ESD-480S280DT
Io= 2100 mA
Io= 2800 mA
ESD-480S420DT
Io= 3150 mA
Io= 4200 mA
ESD-480S560DT
Io= 4350 mA
Io= 5600 mA
ESD-480S10ADT
Io= 7500 mA
Io= 10000 mA
Measured at 100% load and steady-state
temperature in 25°C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 100% load and steady-state
temperature in 25°C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
4 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25°C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
General Specifications (Continued)
Parameter
Min.
Typ.
Max.
93.0%
92.0%
95.0%
94.0%
-
92.5%
91.5%
94.5%
93.5%
-
92.0%
91.0%
94.0%
93.0%
-
91.5%
91.0%
93.5%
93.0%
-
91.5%
89.5%
93.5%
91.5%
-
Standby power
-
-
1.5 W
MTBF
-
210,000
Hours
-
Lifetime
-
102,000
Hours
-
-40°C
-
+85°C
-40°C
-
+75°C
Case temperature for 5 years warranty
Humidity: 10% RH to 95% RH;
-40°C
-
+85°C
Humidity: 5%RH to 100%RH
Efficiency at 480 Vac input:
ESD-480S140DT
Io= 1050 mA
Io= 1400 mA
ESD-480S280DT
Io= 2100 mA
Io= 2800 mA
ESD-480S420DT
Io= 3150 mA
Io= 4200 mA
ESD-480S560DT
Io= 4350 mA
Io= 5600 mA
ESD-480S10ADT
Io= 7500 mA
Io= 10000 mA
Operating Case Temperature
for Safety Tc_s
Operating Case Temperature
for Warranty Tc_w
Storage Temperature
Dimensions
Inches (L × W × H)
Millimeters (L × W × H)
Net Weight
Notes
Measured at 100% load and steady-state
temperature in 25°C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 480Vac/50Hz; Dimming off
Measured at 480Vac input, 80%Load and
25°C ambient temperature (MIL-HDBK217F)
Measured at 480Vac input, 80%Load and
70°C case temperature; See lifetime vs. Tc
curve for the details
With mounting ear
10.3 x 4.92 x 1.71
262 x 125 x 43.5
9.25 x 4.92 x 1.71
235 x 125 x 43.5
-
2650 g
-
Parameter
Min.
Typ.
Max.
Absolute Maximum Voltage on
the Vdim (+) Pin
-20 V
-
20 V
Source Current on Vdim (+)Pin
200 μA
300 μA
450 μA
Dimming Specifications
Dimming
Output
Range
ESD-480S140DT
ESD-480S280DT
ESD-480S420DT
ESD-480S560DT
ESD-480S10ADT
10%Ioset
-
Ioset
ESD-480S140DT
ESD-480S280DT
ESD-480S420DT
ESD-480S560DT
ESD-480S10ADT
105 mA
210 mA
315 mA
435 mA
750 mA
-
Ioset
Notes
Vdim(+) = 0 V
1050mA ≤ Ioset ≤ 1400mA
2100mA ≤ Ioset ≤ 2800mA
3150mA ≤ Ioset ≤ 4200mA
4350mA ≤ Ioset ≤ 5600mA
7500mA ≤ Ioset ≤ 10000mA
105mA ≤ Ioset ＜ 1050mA
210mA ≤ Ioset ＜ 2100mA
315mA ≤ Ioset ＜ 3150mA
435mA ≤ Ioset ＜ 4350mA
750mA ≤ Ioset ＜ 7500mA
5 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25°C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
Dimming Specifications (Continued)
Parameter
Min.
Typ.
Max.
Recommended Dimming Input
Range
0V
-
10 V
Dim off Voltage
0.35 V
0.5 V
0.65 V
Dim on Voltage
0.55 V
0.7 V
0.85 V
-
0.2 V
-
PWM_in High Level
3V
-
10 V
PWM_in Low Level
-0.3 V
-
0.6 V
PWM_in Frequency Range
200 Hz
-
3 KHz
1%
-
99%
3%
5%
8%
5%
7%
10%
92%
95%
97%
90%
93%
95%
-
2%
-
Hysteresis
PWM_in Duty Cycle
PWM Dimming off (Positive
Logic)
PWM Dimming on (Positive
Logic)
PWM Dimming off ( Negative
Logic)
PWM Dimming on ( Negative
Logic)
Hysteresis
Notes
Default 0-10V dimming mode.
Dimming mode set to PWM in PC interface.
Safety &EMC Compliance
Safety Category
UL/CUL
Standard
UL8750,CAN/CSA-C22.2 No. 250.13
CE
EN 61347-1, EN61347-2-13
EMI Standards
(1)
EN 55015
Notes
Conducted emission Test &Radiated emission Test
EN 61000-3-2
Harmonic current emissions
EN 61000-3-3
Voltage fluctuations & flicker
ANSI C63.4 Class B
(1)
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: [1] this device may not cause harmful interference, and [2] this
device must accept any interference received, including interference that may cause
undesired Operation.
EMS Standards
Notes
EN 61000-4-2
Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge
EN 61000-4-3
Radio-Frequency Electromagnetic Field Susceptibility Test-RS
EN 61000-4-4
Electrical Fast Transient / Burst-EFT
EN 61000-4-5
Surge Immunity Test: AC Power Line: Differential Mode 6 kV, Common Mode 10 kV
(2)
6 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25°C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
Safety &EMC Compliance (Continued)
EMS Standards
Notes
EN 61000-4-6
Conducted Radio Frequency Disturbances Test-CS
EN 61000-4-8
Power Frequency Magnetic Field Test
EN 61000-4-11
Voltage Dips
EN 61547
Electromagnetic Immunity Requirements Applies To Lighting Equipment
Notes: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends
also on the other devices connected to the driver and on the fixture itself.
(2) To perform electric strength (hi-pot) testing, the “GDT ground disconnect” (nut and metal lock sheet) on the
driver end-cap should be removed temporarily to prevent the internal gas discharge tube from conducting (as
allowed by IEC 60598-1 Clause 10.2). After testing is completed, these items must be reinstalled to restore lineto-earth surge protection and secure the end cap.
Lifetime vs. Case Temperature
Inrush Current Waveform
7 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25°C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
Efficiency vs. Load
ESD-480S140DT(Io=1050mA)
ESD-480S140DT(Io=1400mA)
ESD-480S280DT(Io=2100mA)
ESD-480S280DT(Io=2800mA)
ESD-480S420DT(Io=3150mA)
ESD-480S420DT(Io=4200mA)
8 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25°C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
ESD-480S560DT(Io=4350mA)
ESD-480S560DT(Io=5600mA)
ESD-480S10ADT(Io=7500mA)
ESD-480S10ADT(Io=10000mA)
Power Factor
9 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25°C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
Total Harmonic Distortion
Protection Functions
Parameter
External
Thermal
Protection
NTC
Min.
Typ.
Max.
R1
-
7.81 kOhm
-
R2
-
4.16 kOhm
-
10%Ioset
60%Ioset
100%Ioset
10%Ioset>Iomin (default setting is 60%)
Iomin
60%Ioset
100%Ioset
10%Ioset≤Iomin (default setting is 60%)
Protection
Current Floor
Notes
When R_NTC falls below R1, External
Thermal Protection is triggered, reducing
output current until R2 is reached.
When R_NTC is less than R2, output current
is reduced to the programmed “Protection
Current Floor.”
Over Temperature Protection
Decreases output current, returning to normal after over temperature is removed.
Short Circuit Protection
Auto Recovery. No damage will occur when any output is short circuited. The output
shall return to normal when the fault condition is removed.
Over Voltage Protection
Limits output voltage at no load and in case the normal voltage limit fails.
Dimming
0-10V Dimming
The recommended implementation of the dimming control is provided below.
Implementation 1: DC Input
10 / 14
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
All specifications are typical at 25°C unless otherwise stated.
Fax: 86-571-86601139
sales@inventronics-co.com
ESD-480SxxxDT
480W Programmable IP67 Driver
Rev. D
Notes:
1. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like resistors and
zener.
2. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
3. If 0-10V dimming is not used, Dim + should be open.
PWM Dimming
Implementation 2: Positive logic
Implementation 3: Negative logic
Time Dimming
Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self AdaptingPercentage and Traditional Timer.
• Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two
days (if difference
工商网监
湘ICP备2023018690号
