EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
Features
Inventronics patented metal case (Patent NO.: 201530552642.8)
High Efficiency (Up to 92%)
Full Power at Wide Output Current Range (Constant Power)
Adjustable Output Current (AOC) with Potentiometer
(ST models)
Adjustable Output Current (AOC) with Programmability
(DT models)
0-10V/PWM Dimmable (Only DT models)
Input Surge Protection: 4kV line-line, 4kV line-earth
All-Around Protection: OVP, SCP, OTP
Waterproof (IP65) and UL Dry / Damp / Wet Location
Class 2 & SELV Output
TYPE HL, for use in a Class I, Division 2 hazardous
(Classified) location
5 Years Warranty
Description
The EUR-096SxxxDT(ST) series is a 96W, constant-current, AOC LED driver that operates from 90-305 Vac
input with excellent power factor. It is designed in round shape and specially created for bay lighting. The high
efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability
and extending product life. To ensure trouble-free operation, protection is provided against input surge, output
over voltage, short circuit, and over temperature.
Models
Adjustable
Output
Current
Range
Full-Power
Current
Range (1)
Default
Output
Current
140-2100mA 1400-2100mA 2000mA
1400-2100mA 1400-2100mA 2000mA
175-2150mA 1750-2150mA 2000mA
245-3500mA 2450-3500mA 2700mA
2450-3500mA 2450-3500mA 2700mA
Input
Voltage
Range (2)
90~305 Vac/
127~300 Vdc
90~305 Vac/
127~300 Vdc
90~305 Vac/
127~300 Vdc
90~305 Vac/
127~300 Vdc
90~305 Vac/
127~300 Vdc
Output
Voltage
Range
Power Factor
Max.
Typical
Output Efficiency
120Vac 220Vac
Power
(3)
Model Number
(4)
24 ~ 69Vdc 96 W
91.5%
0.99
0.96
EUR-096S210DT
24 ~ 69Vdc 96 W
91.5%
0.99
0.96
EUR-096S210ST
24 ~ 55Vdc 96 W
92.0%
0.99
0.96
EUR-096S215DT
14 ~ 39Vdc 96 W
91.0%
0.99
0.96
EUR-096S350DT
14 ~ 39Vdc 96 W
91.0%
0.99
0.96
EUR-096S350ST
(4)
(5)
(5)
(5)
Notes: (1) Output current range with constant power at 96W
(2) Certified input voltage range: UL, FCC 100-277Vac or 127-300Vdc; otherwise 100-240Vac or 127-250Vdc
(except KS).
(3) Measured at 100%load and 220Vac input (see below “General Specifications” for details).
(4) SELV Output.
(5) Class 2 & SELV Output.
1 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
I-V Operation Area
EUR-096S210DT
EUR-096S210ST
72
90
(1400,69)
(10%Ioset,96/Ioset)
60
Output Voltage(V)
60
(1400,69)
(Ioset,96/Ioset)
10
%
70
45
0%
Lo
Lo
ad
Output Voltage(V)
(980,69)
(140,69)
75
(2100,46)
ad
(2100,32)
30
(2100,24)
48
(2100,46)
36
70 %
24
Load
(2100,32)
(1400,24)
(2100,24)
12
Programmed Operating Area
Good Performance Area
Allowed Operating Area
800
400
1200
1600
2000
Allowed Operating Area
Good Performance Area
0
0
(1400,48)
(Ioset,24)
(210,24)
15
100 %
Load
0
1200
2400
1380
1560
1740
1920
Output Current (mA)
Output Current (mA)
Note: 1400mA≤Ioset≤2100mA
Note: 1400mA≤Ioset≤2100mA
2100
2280
EUR-096S215DT
60
(1225,55)
(175,55)
(1750,55)
(10%Ioset,96/Ioset)
(Ioset,96/Ioset)
10
70
Output Voltage(V)
50
%
0%
Lo
Lo
40
ad
(2150,44.5)
ad
(2150,31)
30
(215,24)
20
10
(Ioset,24)
(2150,24)
Programmed Operating Area
Good Performance Area
Allowed Operating Area
0
0
800
400
1200
1600
2000
2400
Output Current (mA)
Note: 1750mA≤Ioset≤2150mA
EUR-096S350DT
EUR-096S350ST
48
42
(2450,39)
(1715,39)
(2450,39)
(10%Ioset,96/Ioset)
35
(Ioset,96/Ioset)
32
10
70
0%
Lo
%
24
Lo
ad
(3500,27.5)
ad
Output Voltage(V)
40
(3500,19)
16
(Ioset,14)
(350,14)
8
Good Performance Area
Allowed Operating Area
(3500,14)
Output Voltage(V)
(245,39)
100 %
Load
28
(3500,27.5)
(2450,27)
21
70%
14
Load
(3500,19)
(3500,14)
(2450,14)
7
Programmed Operating Area
0
Good Performance Area
Allowed Operating Area
2300
3200
0
0
700
1400
2100
2800
3500
4200
Output Current (mA)
2000
2600
2900
3500
3800
Output Current (mA)
Note: 2450mA≤Ioset≤3500mA
Note: 2450mA≤Ioset≤3500mA
2 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
Input Specifications
Parameter
Min.
Typ.
Max.
Notes
Input Voltage
90 Vac
-
305 Vac
Input Frequency
47 Hz
-
63 Hz
-
-
0.75 MIU
UL8750; 277Vac/ 60Hz
-
-
0.70 mA
IEC60598-1; 240Vac/ 60Hz
-
-
1.32 A
Measured at 100%load and 100Vac input.
-
-
0.60 A
Measured at 100%load and 220Vac input.
-
-
1.60 A s
0.90
-
-
THD
-
-
20%
THD
-
-
10%
At 220-240Vac, 50-60Hz, 75%-100% Load
(72-96W)
Min.
Typ.
Max.
Notes
-5%Ioset
-
5%Ioset
140 mA
1400 mA
175 mA
245 mA
2450 mA
-
2100 mA
2100 mA
2150 mA
3500 mA
3500 mA
1400 mA
1400 mA
1750 mA
2450 mA
2450 mA
-
2100 mA
2100 mA
2150 mA
3500 mA
3500 mA
-
5%Iomax
10%Iomax
-
2%Iomax
-
100%load
Startup Overshoot Current
-
-
10%Iomax
100%load
No Load Output Voltage
EUR-096S210DT/ST
EUR-096S215DT
EUR-096S350DT/ST
-
-
90 V
59 V
50 V
Line Regulation
-
-
±0.5%
127~30 Vdc
Leakage Current
Input AC Current
2
Inrush Current(I t)
PF
2
At 220Vac input, 25C cold start,
duration=760 μs, 10%Ipk-10%Ipk. See
Inrush Current Waveform for the details.
At 100-277Vac, 50-60Hz, 70%-100% Load
(67-96W)
Output Specifications
Parameter
Output Current Tolerance
Output Current Setting(Ioset)
Range
EUR-096S210DT
EUR-096S210ST
EUR-096S215DT
EUR-096S350DT
EUR-096S350ST
Output Current Setting Range
with Constant Power
EUR-096S210DT
EUR-096S210ST
EUR-096S215DT
EUR-096S350DT
EUR-096S350ST
Total Output Current Ripple
(pk-pk)
Output Current Ripple at
< 200 Hz (pk-pk)
100%load
100%load. 20 MHz BW
100%load
3 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
Output Specifications (Continued)
Parameter
Min.
Typ.
Max.
-
-
±1.5%
-
-
1.0 s
-
-
0.5 s
-
0.03%/C
-
12V Auxiliary Output Voltage
10.8 V
12 V
13.2 V
12V Auxiliary Output Source
Current
0 mA
-
20 mA
Load Regulation
Turn-on Delay Time
Temperature Coefficient of
Ioset
Notes
Measured at 120Vac input, 70%-100%
Load
Measured at 220Vac input, 70%-100%
Load
Case temperature = 0C ~Tc max
Return terminal is “Dim−“
Note: All specifications are typical at 25C unless otherwise stated.
General Specifications
Parameter
Min.
Typ.
Max.
86.5%
87.0%
89.5%
90.0%
-
87.0%
86.5%
90.0%
89.5%
-
86.0%
85.5%
89.0%
88.5%
-
89.5%
89.5%
91.5%
91.5%
-
90.0%
89.5%
92.0%
91.5%
-
89.0%
88.5%
91.0%
90.5%
-
90.0%
90.0%
92.0%
92.0%
-
90.0%
89.5%
92.0%
91.5%
-
89.5%
88.5%
91.5%
90.5%
-
MTBF
-
354,000
Hours
-
Lifetime
-
85,000
Hours
-
Efficiency at 120 Vac input:
EUR-096S210DT/ST
Io=1400 mA
Io=2100 mA
EUR-096S215DT
Io=1750 mA
Io=2150 mA
EUR-096S350DT/ST
Io=2450 mA
Io=3500 mA
Efficiency at 220 Vac input:
EUR-096S210DT/ST
Io=1400 mA
Io=2100 mA
EUR-096S215DT
Io=1750 mA
Io=2150 mA
EUR-096S350DT/ST
Io=2450 mA
Io=3500 mA
Efficiency at 277 Vac input:
EUR-096S210DT/ST
Io=1400 mA
Io=2100 mA
EUR-096S215DT
Io=1750 mA
Io=2150 mA
EUR-096S350DT/ST
Io=2450 mA
Io=3500 mA
Notes
Measured at 100%load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 100%load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 100%load and steady-state
temperature in 25C ambient;
(Efficiency will be about 2.0% lower if
measured immediately after startup.)
Measured at 220Vac input, 80%Load and
25C ambient temperature (MIL-HDBK217F)
Measured at 220Vac input, 80%Load and
70C case temperature; See lifetime vs. Tc
curve for the details
4 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
General Specifications (Continued)
Parameter
Min.
Typ.
Max.
Notes
Operating Case Temperature
for Safety Tc_s
-40°C
-
+90°C
Operating Case Temperature
for Warranty Tc_w
-40°C
-
+75C
Case temperature for 5 years warranty
Storage Temperature
-40°C
-
+85°C
Humidity: 5%RH to 100%RH
Dimensions
∅5.12 x 2.76
∅130 x 70
Inches (∅ × H)
Millimeters (∅ × H)
Net Weight
-
1150 g
-
Note: All specifications are typical at 25C unless otherwise stated.
Dimming Specifications
Parameter
Min.
Typ.
Max.
-20 V
-
20 V
200 uA
300 uA
450 uA
10%Ioset
-
Ioset
140 mA
175 mA
245 mA
-
Ioset
0V
-
10 V
PWM_in High Level
3V
-
10 V
PWM_in Low Level
-0.3 V
-
0.6 V
PWM_in Frequency Range
200 Hz
-
2 KHz
1%
-
99%
Absolute Maximum Voltage
on the Vdim (+) Pin
Source Current on Vdim
(+)Pin
EUR-096S210DT
EUR-096S215DT
Dimming EUR-096S350DT
Output
EUR-096S210DT
Range
EUR-096S215DT
EUR-096S350DT
Recommended Dimming
Input Range
PWM_in Duty Cycle
Notes
Vdim(+) = 0 V
1400 mA ≤ Ioset ≤ 2100 mA
1750 mA ≤ Ioset ≤ 2150 mA
2450 mA ≤ Ioset ≤ 3500 mA
140 mA ≤ Ioset ＜ 1400 mA
175 mA ≤ Ioset ＜ 1750 mA
245 mA ≤ Ioset ＜ 2450 mA
Default 0-10V dimming mode.
Dimming mode set to PWM in PC
interface.
Safety & EMC Compliance
Safety Category
UL/CUL
Standard
UL 8750, UL 1310, CAN/CSA-C22.2 No. 250.13, CAN/CSA-C22.2 No. 223-M91
CE
EN 61347-1, EN61347-2-13
KS
KS C 7655
EMI Standards
(1)
EN 55015
Notes
Conducted emission Test &Radiated emission Test
5 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
Safety & EMC Compliance (Continued)
EMI Standards
Notes
EN 61000-3-2
Harmonic current emissions
EN 61000-3-3
Voltage fluctuations & flicker
ANSI C63.4 Class B
(1)
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: [1] this device may not cause harmful interference, and [2] this
device must accept any interference received, including interference that may cause
undesired Operation.
EMS Standards
Notes
EN 61000-4-2
Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge
EN 61000-4-3
Radio-Frequency Electromagnetic Field Susceptibility Test-RS
EN 61000-4-4
Electrical Fast Transient / Burst-EFT
EN 61000-4-5
Surge Immunity Test: AC Power Line: line to line 4 kV, line to earth 4kV
EN 61000-4-6
Conducted Radio Frequency Disturbances Test-CS
EN 61000-4-8
Power Frequency Magnetic Field Test
EN 61000-4-11
Voltage Dips
EN 61547
Electromagnetic Immunity Requirements Applies To Lighting Equipment
Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends
also on the other devices connected to the driver and on the fixture itself.
Lifetime vs. Case Temperature
6 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
Inrush Current Waveform
Efficiency vs. Load
EUR-096S210DT/ST(Io=1400mA)
EUR-096S210DT/ST(Io=2100mA)
EUR-096S215DT(Io=1750mA)
EUR-096S215DT(Io=2150mA)
7 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
EUR-096S350DT/ST(Io=2450mA)
EUR-096S350DT/ST(Io=3500mA)
Power Factor
Total Harmonic Distortion
8 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
Protection Functions
Parameter
Notes
Over Temperature Protection
Decreases output current, returning to normal after over temperature is removed.
Short Circuit Protection
Auto Recovery. No damage will occur when any output is short circuited. The output
shall return to normal when the fault condition is removed.
Over Voltage Protection
Limits output voltage at no load and in case the normal voltage limit fails.
Dimming
0-10V Dimming
The recommended implementation of the dimming control is provided below.
V+(RED)
L
Vac
N
V-(BLU)
Inventronics
LED Driver
Vaux(BLK/WHT)
Dim+(PUR)
G
Dim-(GRY)
0 (1)-10V
Dimmer
Implementation 1: DC Input
Notes:
1. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like
resistors and zener.
2. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
3. If 0-10V dimming is not used, Dim + should be open.
PWM Dimming
The recommended implementation of the dimming control is provided below.
V+(RED)
L
Vac
N
V-(BLU)
Inventronics
LED Driver
Vaux(BLK/WHT)
Dim+(PUR)
G
Dim-(GRY)
PWM
Signal
Implementation 2: Positive logic
9 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
V+(RED)
L
Vac
N
V-(BLU)
Inventronics
LED Driver
Vaux(BLK/WHT)
Dim+(PUR)
G
Dim-(GRY)
PWM
Signal
Implementation 3: Negative logic
Notes:
1. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
2. If PWM dimming is not used, Dim + should be open.
3. When PWM negative logic dimming mode and Dim+ is open, the driver will output minimum current.
Programming Connection Diagram (Only DT models)
Note: The driver does not need to be powered on during the programming process.
Please refer to PRG-MUL2 Multi-Programmer datasheet for details.
10 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
Installations
Part Number Suffix
-0000
-0001
Product Type
Center Wire Feed
Outside Wire Feed
Product Appearance
Installation Type
Caution:
1. Complete visual inspection prior to assembly to insure driver is received in proper condition.
2. Thread length for mounting accessory (hook, ring, etc.) should be 16-22mm. After mounting accessory
(hook, ring, etc.) is installed an M4 set screw should be secured in the open location on the driver collar.
3. Maximum weight of combined luminaire/driver assembly should not exceed 11Kg.
11 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
1
3
4
5
6
7
8
DEUR096S00008
A
MECHANICAL OUTLINE DRAWING
A
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
Mechanical
Outline
B
EUR-096SxxxDT-0000
B
INPUT (UL SJTW 3*18AWG
7.8)
OUTPUT (UL SJTW 2*18AWG
7.3)
Hositing thread:
DN15
C
C
V+ (RED)
V- (BLUE)
AC/L (BLACK)
AC/N (WHITE)
GND (GREEN)
GRAY
PURPLE
BLACK/WHITE
D
D
M4
Dimming Wire(UL21996 3*22AWG
5.0 )
REFERENCE
DRAWING NO.
E
E
PROJ:
Tc
Unspecified tolerance:±1.5
DRAWN
CHECKED
B
B
B
F
EUR-096SxxxST-0000
ASSEMBLE NO.
1
C
2
3
4
Hositing thread:
DN15
C
C
POTENTIOMETER
V+ (RED)
V- (BLUE)
AC/L (BLACK)
AC/N (WHITE)
GND (GREEN)
D
E
2
D
D
INPUT (UL SJTW 3*18AWG
M4
7.8)
OUTPUT (UL SJTW 2*18AWG
7.3)
REFERENCE
DRAWING NO.
E
E
DRAWN
Tc
PROJ:
Unspecified tolerance:±1.5
CHECKED
F
F
ASSEMBLE NO.
12 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
A
MECHANICAL OUTLINE DRAWING
A
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
B
B
EUR-096SxxxDT-0001
Dimming Wire(UL21996 3*22AWG
OUTPUT (UL SJTW 2*18AWG
5.0)
7.3)
Hositing thread:
C
C
GRAY
PURPLE
BLACK/WHITE
V+ (RED)
V- (BLUE)
AC/L (BLACK)
AC/N (WHITE)
GND (GREEN)
D
D
INPUT (UL SJTW 3*18AWG 7.8)
M4
1
2
3
4
5
6
7
8
DEUR096S00007
REFERENCE
DRAWING NO.
A
E
A
E
MECHANICAL
OUTLINE DRAWING
Unspecified tolerance:±1.5
PROJ:
Tc
DRAWN
CHECKED
ASSEMBLE NO.
F
B
B
EUR-096SxxxST-0001
2
1
3
4
5
7
8
AUTHORIZE:
Hositing thread:
C
C
V+ (RED)
V- (BLUE)
POTENTIOMETER
AC/L (BLACK)
AC/N (WHITE)
GND (GREEN)
D
D
M4
INPUT (UL SJTW 3*18AWG
7.8)
OUTPUT (UL SJTW 2*18AWG
7.3)
REFERENCE
DRAWING NO.
E
E
Tc
DRAWN
PROJ:
Unspecified tolerance:±1.5
CHECKED
F
ASSEMBLE NO.
1
2
3
4
13 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
Optional Metal Parts
HKK-D1500
BLT-M1000
M10*1.5
DN15
PROJ:
PROJ:
Unspecified tolerance:±1
Unspecified tolerance:±1
RoHS Compliance
Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other
hazardous substances from electronic products.
REFERENCE
DRAWING NO.
14 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
EUR-096SxxxDT(ST)
96W AOC Driver for High Bay
Rev. E
Revision History
Change
Date
Rev.
2016-07-08
A
2017-02-05
B
2017-07-06
2018-03-05
2018-03-20
C
D
E
Description of Change
Item
From
To
Datasheets Release
/
/
Features
/
Updated
Mechanical Outline
/
Updated
Input Specifications
PF/THD (Notes)
Updated
Output Specifications
Temperature
Ioset
Safety & EMC Compliance
/
Updated
Mechanical Outline
/
Updated
Features
5 Years Warranty
Added
Description
/
Updated
Models
EUR-096S215DT/ST
Added
Models
Notes(2)
Updated
I-V Operation Area
EUR-096S215DT/ST
Added
Output Current Setting(Ioset) Range EUR-096S215DT/ST
Added
Output Current Setting Range with
EUR-096S215DT/ST
Constant Power
Added
No Load Output Voltage
EUR-096S215DT/ST
Added
Efficiency at 120 Vac input
EUR-096S215DT/ST
Added
Efficiency at 220 Vac input
EUR-096S215DT/ST
Added
Efficiency at 277 Vac input
EUR-096S215DT/ST
Added
General Specifications
Case temperature for 5 years
Updated
warranty
Dimming Output Range
EUR-096S215DT
Added
Efficiency vs. Load
EUR-096S215DT/ST
Added
Mechanical Outline
Optional Metal Parts
Added
Features
High Efficiency
Updated
Models
/
Updated
I-V Operation Area
/
Updated
Output Current Setting(Ioset) Range /
Output Current Setting Range with
/
Constant Power
No Load Output Voltage
/
Updated
Efficiency at 120 Vac input
/
Updated
Efficiency at 220 Vac input
/
Updated
Efficiency at 277 Vac input
/
Updated
Efficiency vs. Load
/
Updated
Coefficient
of
Updated
Updated
Updated
15 / 15
Specifications are subject to changes without notice.
www.inventronics-co.com
Tel: 86-571-56565800
Fax: 86-571-86601139
sales@inventronics-co.com
工商网监
湘ICP备2023018690号
