HP621-13040

CUSTOMER DRAWING - NOTES 1. BEFORE USING, CHECK THE HARMFUL CRACK, BURR, ETC. 1.02506WP J/C HY13M-B 2. MARKING & CAV.No AS A GENERAL RULE OF KUM. 3. GENERAL TOLERANCE : SEE BELOW 4. ASSY PARTS. 1)FRONT HOLDER ASSY: HP621-13040 2)TERMINAL APPLICATION WIRE(SQ) PART NAME 0.22 TML TWPII-M-SS 0.3~0.5 TML TWPII-M-S 0.22 TML AWP-M-SS 0.3~0.5 TML AWP-M-S 0.75~1.25 TML AWP-M-M ISO-VIEW PART No. TP231-00400 TP231-00200 TP131-00400 TP131-00100 TP131-00200 3)WIRE SEAL 37.4 20.7 2.4 MARKING Cav.No. PART NAME W/S TWP-0.9S(MB) W/S TWP-1.4S(BR) W/S TWP-1.6S(GN) W/S TWP-V(R) W/S AWP-0.9S(MB) W/S AWP-1.4S(BR) W/S AWP-1.9S(GN) W/S AWP-2.3S(GY) W/S AWP-2.7S(OR) W/S AWP-V(R) PART No. EU020-01140 EU020-01050 EU020-00030 EU020-00060 EB010-01140 EB010-01050 EB010-01030 EB010-01120 EB010-01100 EB010-01060 5. ASSY P/No. 2.25 31.5 35.55 1.8 48.4 APPLICATION WIRE(SQ) Φ0.9 Φ1.4 Φ1.6 Φ0.9 Φ1.4 Φ1.9 Φ2.3 Φ2.7 - ASSY P/NO. ① ② ③ ④ ⑤ HP611-13020 ● HP621-13040 ● ASSY P/NAME 02506WP J/C HY13M-B F/H 02506WP J/C HY13M-L 6.THIS IS A WATERPROOF CONNECTOR. 2.F/H 02506WP J/C HY13M-L 7. PIN-LAYOUT ISO-VIEW 43.6 MARKING 21.5 12.3 26.7 Cav.No. CJW 14.12.04 승인 10MAX 30MAX 50MAX 70MAX 100MAX 120MAX 250MAX 250VR ANGLE A 0.15 0.20 0.30 0.40 0.50 0.75 0.90 1.40 30˚ - NOTE No. SYM 신 규 LDH ALTERATION 담당 ② F/H 02506WP J/C HY13M-L HP621-13040 BLUE PBT DRAWING NAME 02506WP J/C HY13M-B ① HP611-13020 BLACK PBT DRAWING No. HP611-13020-C01 PART No. COLOR MATERIAL NO. GENERAL TOLERANCE DATE - 02506WP J/C HY13M-B PART NAME A THIRD ANGLE PROJECTION TOLERANCE 1/2 KHR KHR KNJ CJW SCALE DESIGN DRAWN CHECKED APPROVED 케이유엠 Data_Server:d:/도면/.../02506WP/... A3.