600-5008

Technical Data Sheet Disposable Coverall and Lab Coat Cleanroom Apparel Integrity® Cleanroom Apparel products are designed and manufactured to meet the stringent demands of the cleanroom industry. Manufactured from a lightweight, low linting material, our products provide excellent comfort, breathability and water vapour transmission rates. Our products are CE marked to PPE Standard Category 3, Type 5 & 6 offering a cost effective option for your disposable apparel requirements. Our products are available sterile by Gamma Irradiation and are ISO4, EU GMP Grade A Compatible. LABCOAT 600-5001 Each Small 600-5002 Each Medium 600-5003 Each Large 600-5004 Each X-Large 600-5005 Each XX-Large 600-5006 Each Small 600-5007 Each Medium 600-5008 Each Large 600-5009 Each X-Large 600-5010 Each XX-Large 600-5011 Each Small 600-5012 Each Medium 600-5013 Each Large 600-5014 Each X-Large 600-5015 Each XX-Large DISPOSABLE COVERALL 1 COVERALL WITH FEET STERILE Call +44 (0) 1473 836205 Email info@integritycleanroom.com /integrity_eu /company/integrity-cleanroom IMPORTANT NOTICE: This data sheet and its contents (the “Information”) belong to Integrity® Cleanroom or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but Integrity® Cleanroom assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where Integrity® Cleanroom was aware of the possibility of such loss or damage arising) is excluded. © Integrity® Cleanroom. PAGE 1 coverall | 23 January 2015 11:46 AM Technical Data Sheet 7 15 Integrity® Disposable Hooded Coverall Type 5/6 16 14 9 11 10 5 2 8 3 1 elastic Back 6 4 5 6 Type 13 12 3 Type Cat DESCRIPTION CODE MEDIUM (CM) LARGE (CM) X LARGE (CM) XX LARGE (CM) TOLERANCE +/(CM) Overall Length 1 155 170 183 185 2.54 Torso Length 2 88 92 103 105 2.54 Zipper Length 3 65 65 76 78 2.54 Inseam 4 71 78 82 84 2.54 Chest Width 5 66 68 75 75 2.54 Waist Size (before elastic sewn in) 6 66 68 75 75 2.54 Overall Arm Length 7 167 175 187 188 2.54 Sleeve Length (from underarm seam) 8 50 54 56 56.5 2.54 Sleeve Width 9 25.5 26 26.5 27 2.54 Relaxed Wrist Opening 10 7 8 8 8.5 2.54 Stretched Wrist Opening 11 16 16.5 16.5 17 2.54 Relaxed Ankle Opening 12 12 15 15 16 2.54 Stretched Ankle Opening 13 19 21 21 22.5 2.54 Hood Height/Stretched Hood Opening 14 30.5 31 31 32 2.54 Hood Width 15 12 13 13 14 2.54 Relaxed Hood Opening 16 16.00 17.00 17.00 18.00 2.54 Call +44 (0) 1473 836205 Email info@integritycleanroom.com /integrity_eu /company/integrity-cleanroom IMPORTANT NOTICE: This data sheet and its contents (the “Information”) belong to Integrity® Cleanroom or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but Integrity® Cleanroom assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where Integrity® Cleanroom was aware of the possibility of such loss or damage arising) is excluded. © Integrity® Cleanroom. PAGE 2 coverall | 23 January 2015 11:46 AM Technical Data Sheet Integrity® Disposable Zip Lab Coat 2 4 5 4 3 1 5 Type 6 XX-LARGE XXX-LARGE 6 3 XXXX-LARGE TOLERANCE +/- Type Cat DESCRIPTION CODE S M LARGE X-LARGE Overall Length 1 104.14 111.76 111.76 116.84 116.84 119.38 121.92 5.08 Chest Width 2 55.88 60.98 66.04 71.12 78.74 86.36 93.98 2.54 Sleeve Length (from underarm seam) 3 45.72 50.8 53.34 55.88 58.42 60.98 63.5 1.27 Sleeve Opening Width 4 26.67 26.87 29.21 29.21 30.48 35.58 40.64 1.27 Collar Width (from the shoulder) 5 6.35 6.35 6.35 6.35 6.35 6.35 6.35 1.27 Sweep 6 121.92 132.08 142.24 152.4 167.64 180.34 193.04 5.08 Call +44 (0) 1473 836205 Email info@integritycleanroom.com /integrity_eu /company/integrity-cleanroom IMPORTANT NOTICE: This data sheet and its contents (the “Information”) belong to Integrity® Cleanroom or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but Integrity® Cleanroom assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where Integrity® Cleanroom was aware of the possibility of such loss or damage arising) is excluded. © Integrity® Cleanroom. PAGE 3 coverall | 23 January 2015 11:46 AM Technical Data Sheet TECHNICAL SPECIFICATIONS DESCRIPTION Basis Weight oz/yd Thickness Mils INTEGRITY RESULT TEST PROCEDURE PGI STANDARD REF TEST PROCEDURE ASTM STANDARD 1.5 D3776 D3776 6.77 D1777 D1777 Strip Tensile (MD/CD) lbs/in 8.73/6.22 D1682 D1682 Strip Elongation (MD/CD) % 112/107 D1682 D5034 D1682 Work to Break in - lbs 20.38/12.13 D1682 Work up to Fmax. (MD/CD) in - lbs 18.55/10.83 D1682 Toungue Tear (MD/CD) lbs 15.25/9.62 DASTM D2261 Class 1 CS-191-53, Sec. 1610 Flammability Mullen Burst lbs/sq in 83 Particulate Burden none Shrink Temp F°/C° 270/135 Melt Temp F°/C° 275/135 Water Vapour Transmission gm/24hrs 840 Call +44 (0) 1473 836205 Email info@integritycleanroom.com ASTM E96 /integrity_eu /company/integrity-cleanroom IMPORTANT NOTICE: This data sheet and its contents (the “Information”) belong to Integrity® Cleanroom or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but Integrity® Cleanroom assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where Integrity® Cleanroom was aware of the possibility of such loss or damage arising) is excluded. © Integrity® Cleanroom. PAGE 4 coverall | 23 January 2015 11:46 AM Technical Data Sheet TEST RESULTS ITEM TEST PROCEDURE PGI STANDARD REF TEST PROCEDURE ASTM STANDARD GB/T 4669-1995 50 Water Vapour Transmission g/m 24hrs GB/T 12074-1991 1500 Water Resitance Kpa FZ/T 01004-1991 18.8 Flat Abrasion FZ/T 01001-1991 198 Breaking Strength N/5cm GB/T 3923.1-1997 Radial: 70 Woof: 50 Elongation at Break % GB/T 3923.1-1997 Radial: 60 Woof: 50 Tear Strength N/5cm ASTM D2261-1996 Sample cut by horizontal side, normal testing cannot be done Fabric Weight g/m2 2 Woof: 8.6 Electric Charge Density uC/m GB/T 5455-1997 6.5 Flammability GB/T 4744-1997 Melt-down Bleach 5% ASTM T903 Pass Hydraulic Jack Oil ASTM T903 Pass Isocyanate Based Paint Hardener ASTM T903 Pass Motor Oil ASTM T903 Pass Sodium Hydroxide ASTM T903 Pass Mineral Oil ASTM T903 Pass 2 Chemical Resistance Dry Particle Filtration Efficiency No Particle Penetration Wet Particle Filtration Efficiency No Particle Penetration Call +44 (0) 1473 836205 Email info@integritycleanroom.com /integrity_eu /company/integrity-cleanroom IMPORTANT NOTICE: This data sheet and its contents (the “Information”) belong to Integrity® Cleanroom or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but Integrity® Cleanroom assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where Integrity® Cleanroom was aware of the possibility of such loss or damage arising) is excluded. © Integrity® Cleanroom. PAGE 5 coverall | 23 January 2015 11:46 AM