2N7002AK

山东晶导微电子股份有限公司 Jingdao Microelectronics co.LTD 2N7002AK SOT-23 2N7002AK 0.3A 60V N-CHANNEL MOSFET Features • Fast Switching Capability • Avalanche Energy Tested • Low On Resistance • Low Input Capacitance • Small Surface Mount Package 2.Drain Applications • Motor Control • Power Management Functions 1.Gate 3.Source Absolute Maximum Ratings (TA=25°C, unless otherwise specified) Parameter Symbols Ratings Units Drain-Source Voltage VDSS 60 V Gate-Source Voltage VGSS ±20 V ID 0.3 A Tj, Tstg -55 ~ +150 °C Continuous Drain Current Operation Junction Temperature And Storage Temperature Parameter Symbols Test Conditions Min Typ Units Units Off Characteristics Drain-Source Breakdown Voltage Drain-Source Leakage Current BVDSS VGS = 0V, ID = 10uA IDSS VDS = 60V, VGS = 0V 1 VGS = 20V, VDS = 0V 10 VGS = -20V, VDS = 0V -10 Forward 60 V IGSS Gate- Source Leakage Current Reverse uA uA On Characteristics Gate Threshold Voltage VGS(TH) Static Drain-Source On-State Resistance RDS(ON) HBM Rev 1.1 13-May-22 ESD VDS = VGS, ID = 250uA 1.5 2.5 V VGS = 10V, ID = 0.3A 1.6 2.5 Ω VGS = 4.5V, ID = 0.2A 1.9 3.0 Ω VDS = 10V, ID = 0.115A SOT23-MOS-2N7002AK-0.3A60V 1.0 2.0 KV Page 1 of 5 山东晶导微电子股份有限公司 Jingdao Microelectronics co.LTD 2N7002AK Dynamic Characteristics Input Capacitance CISS Output Capacitance COSS CRSS Reverse Transfer Capacitance VDS = 25V, VGS = 0V, f = 1.0MHz 23 pF 3.4 pF 1.4 pF 10 ns 33 ns Switching Characteristics Turn-On Delay Time tD(ON) Turn-Off Delay Time tD(OFF) VDD =30V,ID=3A,RL=150Ω VGEN = 10,RGEN = 25Ω Typical Characteristics Fig.1 Typical Output Characteristic Fig.2 Typical Transfer Charactersitics 1 0.6 Drain-Source On-Resistance - RDS(ON)Ω VGS=5.5V VGS=5.5V Drain Current - ID(A) 0.5 VGS=5.5V 0.4 VGS=5.5V 0.3 VGS=5.5V 0.2 VGS=3.0V 0.1 VGS=2.5V 2 1 3 4 TA=150℃ TA=-55℃ 0 5 1 Drain-Source Voltage - VDS (V) Fig.3 On-Resistance vs.Drain Current & Gate Voltage 7 6 5 VGS=5V 4 VGS=10V 2 0.2 0.3 0.4 2.0 0.5 VGS=10V ID=115mA 1.5 1.0 VGS=5V ID=115mA 0.5 0.6 0 -55 -25 0 25 50 75 100 125 150 Abient temperature - Ta (°C) Drain-Source Current - ID (A) Rev 1.1 13-May-22 5 4 2.5 1 0.1 3 Fig.4 Normalized Static Drain-Source On-Resistance Static Drain-Source On-Resistance - RDS(ON) Static Drain-Source - VDS(ON) 8 0 2 Gate-Source Voltage - VGS (V) 9 3 TA=25℃ TA=85℃ 0.1 0 0 0.1 www.sdjingdao.com Page 2 of 5 山东晶导微电子股份有限公司 Jingdao Microelectronics co.LTD 2N7002AK Fig.5 Gate Threshold Variation vs.Ambient Temperature Fig.6 Typical Total Capacitance 100 2.0 Gate Threshold Voltage - VGS(th) (V) 1.9 ID=250uA Capacitance - C (pF) 1.8 1.7 1.6 1.5 1.4 1.3 Ciss VGS=5 VGS=5.5V 1.0 Coss 1.2 Crss 1.1 0.1 1.0 -50 -25 0 25 50 75 100 125 0 150 5 10 15 20 25 30 35 40 Drain-Source Voltage - VDS (V) Abient temperature - Ta (°C) Fig.7 Reverse Dain Current vs.Source-Drain Voltage 1 Sourcee-Current - Is (A) TA=150℃ 0.1 TA=125℃ 0.01 TA=80℃ TA=25℃ VGS=5.5V 0.001 TA=-55℃ 0.0001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Source-Drain Voltage - VSD (V) Rev 1.1 13-May-22 www.sdjingdao.com Page 3 of 5 山东晶导微电子股份有限公司 Jingdao Microelectronics co.LTD 2N7002AK SOT-23 Package Outline Dimensions e ∠ALL ROUND A D e M e E C a L1 L HE SOT-23 mechanical data UNIT mm mil A D E HE max 1.1 0.20 1.4 3.0 2.6 min 0.9 0.08 1.2 2.8 max 43 7.9 55 118 102 24 77 min 3.1 47 110 13 67 35 C e M L L1 a ∠ 0.6 1.95 0.55 0.36 0.15 (ref) (ref) 2.2 0.35 1.7 0.0 12° 87 22 14 (ref) (ref) 6 0.0 Marking The recommended mounting pad size 0.8 (0.031) Type number Marking code 2N7002AK 72AK 0.9 (0.039) 0.95 (0.037) 0.95 (0.037) 2.0 (0.079) mm Unit ： (inches) Rev 1.1 13-May-22 www.sdjingdao.com Page 4 of 5 山东晶导微电子股份有限公司 Jingdao Microelectronics co.LTD 2N7002AK Important Notice and Disclaimer Jingdao Microelectronics reserves the right to make changes to this document and its products and specifications at any without notice. Customers should obtain and confirm the latest product information and specifications before final, purchase or use. Jingdao Microelectronics makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Jingdao Microelectronics assume any liability for application assistance or customer product design. Jingdao Microelectronics does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Jingdao Microelectronics. Jingdao Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of Jingdao Microelectronics. Rev 1.1 13-May-22 www.sdjingdao.com Page 5 of 5