5032-8.00-12-10-102PB

APPROVAL SHEET Issued No. : DESCRIPTION : SMD 5032 CRYSTAL NOMINAL FREQ. : 8.00 MHz TAITIEN P/N : TAITIEN MODEL : 5032-8.00-12-10-102PB REVISION : 1 DATE : 06/19/2017 QA Checked CUSTOMER : CUSTOMER P/N : Customer Signature Approved: Date: Prepared REVISION HISTORY Rev. 01 Revised Page N/A Revision Content InitialReleased Date 06/29/2016 Ref. No. N/A Reviser YU PING MA Please note that placing order with Taitien constitutes acknowledgement that you have read and agree to Taitien’s Terms and Conditions. Please refer to our website for more details. Thank you for choosing Taitien! Remedies and Limitation of Liability: BUYER’S SOLE AND EXCLUSIVE REMEDY AND TAITIEN’S SOLE LIABILITY, WITH RESPECT TO ANY BREACH OF WARRANTY, SHALL BE AT TAITIEN’S OPTION: (A) REPAIR OR REPLACEMENT OF THE DEFECTIVE OR NONCONFORMING CRYSTALS OR (B) REFUND OF BUYER’S PURCHASE PRICE FOR THE DEFECTIVE OR NONCONFORMING CRYSTALS. IN NO EVENT SHALL TAITIEN’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES ARISING OUT OF ANY CAUSE (INCLUDING, BUT NOT LIMITED TO, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER TORT) EXCEED THE PURCHASE COST OF THE CRYSTALS. IN NO EVENT SHALL TAITIEN BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES. CONTENT SPECIFICATIONS ELECTRICAL SPECIFICATIONS PAGE 4~5 RECOMMENDED IR REFLOW PROFILE 6 PRODUCT DIMENSIONS 7 PRODUCT IDENTIFICATION (MARKING) 7 PACKAGE INFORMATION 8 ELECTRICAL SPECIFICATIONS Parameter 1-1 Nominal Frequency 1-2 Frequency Tolerance. Min. Typ. Max. 8.00 Units MHz -10 +10 ppm o C o C 1-3 Operating Temperature range -20 +75 1-4 Storage Temperature range -40 +85 1-5 Temperature Characteristics -10 +10 1-6 Nominal Load Capacitance 1-7 Series Resistance 1-8 Shunt Capacitance 1-9 Motion Capacitance 1-10 Motion Inductance 1-11 Q factor K 1-12 Spurious Response dB 1-13 Frequency Pull ability 1-14 C0/C1 Ratio 1-15 Aging 1-16 Insulation Resistance 500MΩ Min. @ DC100V 1-17 Nominal Drive Level 10 1-18 Dependency Condition 1-19 1-20 1-21 Drive Level Dependency Resistance Max. Minus Min. Drive Level Dependency Frequency Max. Minus Min. Drive Level Dependency Resistance Max. Test Condition 12 ppm at 25℃+/-2℃ -30℃ to +75℃ pF 100 7 Ω pF fF mH ppm/pF -3 +3 ppm/year μw μw Ω ppm Ω into 10Ω CUSTOMER SPECIAL REQUIREMENT 2 ENVIRONMENTAL Parameter 3-1 Vibration Test 3-2 Thermal Shock 3-3 Mechanical Shock Reference Std. Test Condition MIL-STD-883 2007 Condition A 10~2000Hz, 1.52mm, 20g, each JESD22-B103 Condition 1 axis for 4 hrs MIL-STD-883 1010 Condition B -55℃, 125℃; soak time is 10 JESD22-A104 Condition B mins, with total 200 cycles MIL-STD-883 2002 Condition B 1500G, half-sine, 0.5ms, each JESD22-B104 Condition B axis for 3 times. RECOMMENDED IR REFLOW PROFILE IR REFLOW PROFILE OF CERAMIC SMD PRODUCTS FOR Pb FREE PROCESS 260±5℃ TEMPERATURE PREHEATING 150±10℃ COOLING 25±5℃ 60 TO 120 20 10 TIME （SECONDS） 20 PRODUCT DIMENSIONS DIMENSIONS 3.7 1.7 PRODUCT IDENTIFICATION (MARKING) PROCEDURE: LASER Frequency Code XX.XXX MHz 6 digits (Including decimal point) Date Code YWW Year of Manufacture (7=2007, 8=2008) FOR EXAMPLE: Week No. (2 digits) Introduction: 16.367667 MHz Made in Week 22, 2008 PACKAGE INFORMATION TAPE (CARRIER) DIMENSIONS THE DIRECTION OF PACKING REEL DIMENSIONS