09140093001

Han-Modular® Contents Description of the Han-Modular® system . . . . . . . . . . . . . . . . . . . . . . . . . . . Summary Han-Modular® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han-Modular® Compact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han-Modular® Twin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han-Modular® Hinged frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han-Modular® Docking frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han-Modular® ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® 200 A Axial module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® 200 A Crimp module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® 100 A Axial module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® 100 A Crimp module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® 70 A Axial module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® 40 A Axial module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® 40 A Crimp module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® C Axial module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® C module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® CC Protected module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® CD module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han E® module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® EE module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® EE Quick Lock module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han E® Protected module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® EEE module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® ES module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® HV module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han DD® module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han DD® Quick Lock module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® DDD module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® High Density module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® D-Sub module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® USB module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® FireWire module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® RJ45 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® GigaBit module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han-Quintax® module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® Coax module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® Multi Contact module according to DIN 41 626 . . . . . . . . . . . . . . . . . Han® Multi Contact module according to D-Sub . . . . . . . . . . . . . . . . . . . . . Han® Pneumatic module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han® SC module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 06.03 06.04 06.08 06.10 06.12 06.14 06.16 06. 20 06. 22 06. 24 06. 26 06. 28 06. 30 06. 32 06. 34 06. 36 06. 38 06. 40 06. 42 06. 44 06. 46 06. 48 06. 50 06. 52 06. 54 06. 58 06. 60 06. 62 06. 64 06. 66 06. 68 06. 70 06. 72 06. 78 06. 82 06. 84 06. 86 06. 88 06. 90 06. 94 Han Modular 06 . 01 Han-Modular® Han-Elisa® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han-Elisa® Pt100 Modul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han-Elisa® Output module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han-Elisa® ID module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han-Modular® Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Han Modular 06 . 02 06.  96 06.  98 06.100 06.102 06.104 Han-Modular® Description of the Han-Modular® system The Han-Modular® series is a new system of inserts designed to meet the specific requirements of individual customers. In close cooperation with potential users a range of modular inserts have been developed allowing the simple assembly of custom designed complete connectors which meet the diverse requirements encountered by designers today. Assembly details Han Modular Han-Modular® is a logical development of the Han-Com® series which already offers the combination of power and signal circuits in one connector. The individual modules of this series now allow the integration of electrical, optical and gaseous signal and power connections in one connector assembly. The pneumatic contacts are also suitable for the connection of liquid media. However it must be stated that a combination of electrical and liquid connections in one connector is not allowed according to VDE regulations. The individual contacts used in this system are all from existing well proven ranges and it is possible to use combinations of 1 to 12 modules depending on the size of the hoods and housings chosen. The basic modules snap into a mounting frame and can be exchanged separately at any time. Advantages: ❑ Custom designs can be simply assembled ❑ Optimum solutions can be reached ❑ Stock can be minimized 06 . 03 Summary Han-Modular® Han-Modular® Compact Page 06.08 Han-Modular® Twin Han Modular Page 06.10 Han-Modular® Hinged frames in Han® B hoods and housings Page 06.12 Han-Modular® Docking frame Page 06.14 Han-Modular® ECO Page 06.16 06 . 04 Summary Han-Modular® Series Han® 200 A Axial module Han® 200 A Crimp module Han® 100 A Axial module Han® 100 A Crimp module 1 1 2 2 Axial screw terminal Crimp terminal Axial screw terminal Crimp terminal 200 A 1000 V 25 ... 70 mm² 06.20 200 A 1000 / 1000 V 25 ... 70 mm² 06.22 100 A 1000 V 10 ... 38 mm² 06.24 100 A 1000 V 10 ... 35 mm² 06.26 Han® 70 A Axial module Han® 40 A Axial module Han® 40 A Crimp module Han® C Axial module 2 2 2 3 Axial screw terminal Axial screw terminal Crimp terminal Axial screw terminal 70 A 1000 V 6 ... 22 mm² 06.28 40 A 1000 V 2.5 ... 10 mm² 06.30 40 A 1000 V 1.5 ... 10 mm² 06.32 40 A 690 V 2.5 ... 10 mm² 06.34 Han® C module Han® CC Protected module Han® CD module Han E® module 3 4 3/4 6 Modules Crimp terminal Crimp terminal Crimp terminal Crimp terminal Rated current Rated voltage Wire gauge Page 40 A 400 / 690 V 1.5 ... 10 mm² 06.36 40 A 830 V 1.5 ... 6 mm² 06.38 40 A / 10 A 830 V / 830 V 1.5 ... 6 mm² / 0.14 ... 2.5 mm² 06.40 16 A 500 V 0.14 ... 4 mm² 06.42 Number of contacts Modules Rated current Rated voltage Wire gauge Page Series Number of contacts Modules Rated current Rated voltage Wire gauge Page Series Number of contacts Series Han® EE module Han® EE Quick Lock module Han E® Protected module Han® EEE module 8 8 6 20 Modules Crimp terminal Quick Lock terminal Crimp terminal Crimp terminal Rated current Rated voltage Wire gauge Page 16 A 400 V 0.14 ... 4 mm² 06.44 16 A 400 V 0.5 ... 2.5 mm² 06.46 16 A 830 V 0.14 ... 4 mm² 06.48 16 A 500 V 0.14 ... 4 mm² 06.50 Number of contacts Han Modular 06 . 05 Summary Han-Modular® Series Number of contacts Modules Rated current Rated voltage Wire gauge Page Series Han Modular Number of contacts Modules Rated current Rated voltage Wire gauge Page Series Number of contacts Modules Page Han® ES module Han® HV module Han® HV module Han DD® module 5 2 2 12 Cage-clamp terminal Crimp terminal Crimp terminal Crimp terminal 16 A 400 V 0.14 ... 2.5 mm² 06.52 16 A 2900 / 5000 V 0.5 ... 4 mm² 06.54 40 A 2900 / 5000 V 1.5 ... 10 mm² 06.56 10 A 250 V 0.14 ... 2.5 mm² 06.58 Han DD® Quick Lock module Han® DDD module Han® High Density module Han® D-Sub module 12 17 25 9 Quick Lock terminal Crimp terminal Crimp terminal Crimp terminal 10 A 250 V 0.25 ... 1.5 mm² 06.60 10 A 160 V 0.14 ... 2.5 mm² 06.62 4A 50 V 0.08 ... 0.52 mm² 06.64 5A 50 V 0.08 ... 0.52 mm² 06.66 Han® USB module Han® FireWire module Han® RJ45 module Han® GigaBit module 4 6 8 8 USB 2.0 IEEE 1394 Ethernet Cat. 5e Ethernet Cat. 6 06.68 06.70 06.72 06.78 Series Han-Quintax® module Han® Multi Contact module 2 4 Number of contacts Modules Page Contacts 06.82 Quintax contact 4 + shielding High Density Quintax contact 8 + shielding 06.84 Han D® D Coax Han E® E Coax contact contact 1 + shielding 1 + shielding 75 Ω 06 . 06 * HCS®=Hard Clad Silica (is registered trade mark of the SpecTran Corporation) 50 Ω 06.86 06.88 FOC contacts Coaxial contact Multimode F.O. HCS®*/PCF F.O. 1 mm POF 50 Ω RG 174 75 Ω RG 179 50 Ω RG 58 Summary Han-Modular® Series Number of contacts Han® Pneumatic module Han® SC module 2 3 4 06.90 06.92 06.94 Han-Elisa® Dummy module 06.96 06.104 Modules Page Contacts SC contact ∅ 6.0 mm Temperature I/O modules ID module ∅ 1.6 mm ∅ 3.0 mm ∅ 4.0 mm Han Modular 06 . 07 Han-Modular® Compact Features • • • • • Technical characteristics Hoods/Housings Compact design saves space Modular structure increases flexibility Simple and quick assembly Robust design Two part grommet housing Han Modular Material zinc die-cast Surface nickel plated Locking element stainless steel Hoods/Housings sealing NBR Limiting temperatures -40 °C ... +125 °C Degree of protection acc. to DIN EN 60 529 for coupled connector IP 65 Mechanical working life - mating cycles 500 PE contact wire gauge 10 mm² / AWG 8 Stripping length 10 mm Tightening tourque 1 Nm   Protection covers for housings, bulkhead mounting Material polycarbonate Locking element Polyamide Hoods/Housings sealing NBR Limiting temperatures -40 °C ... +125 °C Degree of protection acc. to DIN EN 60 529 for coupled connector IP 65 Flammability acc. to UL 94 V0     Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ Han® Axial screw module, Wire gauge: 10 mm² 06 . 08 ➁ Han® C module, Wire gauge: 6 mm² ➀ Hood with side entry ➁ Thread M25 ➂ Bulkhead mounted housing with locking lever ➃ Carrier hood Han-Modular® Compact Identification Part number Hoods side entry M25 Dimensions in mm 4 screws are included in the delivery range 19 14 001 0501 Hoods top entry M25 Drawing 4 screws are included in the delivery range 19 14 001 0401 Han Modular Hoods top entry M32 4 screws are included in the delivery range 19 14 001 0402 Carrier hood 09 14 001 0311 Protection covers 09 14 001 5402 Housings, bulkhead mounting Protection covers for housings, bulkhead mounting Panel cut out 09 14 001 0301 09 14 001 5401 Stock items in bold type 06 . 09 Han-Modular® Twin Features • • • • • Technical characteristics Hoods/Housings Compact and space saving High degree of flexibility due to modular assembly Easy and quick assembly Robust design Hood consists of two parts Material aluminium die-cast Surface powder-coated Locking element Han-Easy Lock® Material Panel feed through housing / Shielding frame zinc die-cast Hoods/Housings seal NBR Limiting temperatures -40 °C ... +125 °C Degree of protection acc. to DIN EN 60 529 for coupled connector IP 65 Mechanical working life - mating cycles ≥ 500 PE contact wire gauge 10 mm² / AWG 8 Stripping length 10 mm Tightening torque 1 Nm Han Modular   06 . 10 ➀ Hood with top entry ➁ Carrier hood ➂ Bulkhead mounted housing with locking lever ➃ Switch board panel ➄ Split Hood ➅ Thread M32 Han-Modular® Twin Identification Part number Drawing Dimensions in mm Hoods top entry M32 19 14 002 0402 Han Modular Shielding frame 09 14 000 9924 Carrier hood 09 14 002 0311 Housings, bulkhead mounting Panel cut out 09 14 002 0301 Panel feed through housings Panel cut out 09 14 000 9928 Stock items in bold type 06 . 11 Han-Modular® Hinged frames Features • Pre-leading grounding system according VDE • Modules can only be assembled polarized to guarantee a correct orientation • Alphabetical marking of module position • High mechanical reliability of modules in case of vibration and impact stress • No tools necessary to remove modules Technical characteristics Specifications Approvals DIN EN 60 664-1 DIN EN 61 984 ,   Hinged frames Number of modules PE contact Wire gauge - Power side * - Signal side Material Limiting temperatures Mechanical working life - mating cycles Han Modular 2, 3, 4, 6 4 ... 10 mm² AWG 12 ... 8 1 ... 2.5 mm² AWG 18 ... 14 zinc die-cast -40 °C ... +125 °C ≥ 500   Hoods/Housings Selection of hoods/housings see chapter 30 / chapter 31 Material aluminium die-cast Surface powder-coated RAL 7037 Locking element Han-Easy Lock® Hoods/Hosuings seal NBR Limiting temperatures -40 °C ... +125 °C Degree of protection acc. to DIN EN 60 529 for coupled connector IP 65   Accessories Coding of hoods/housings 06 . 12 * 10 mm² / AWG 8 only with ferrule crimp tool 09 99 000 0374 chapter 40 Han-Modular® Hinged frames Part number for Hood/Housing 2) Identification Size Marking A ... F Marking a ... f Hinged frame for 2 modules 6B 09 14 006 0303 Drawing Dimensions in mm Hoods Housings 09 14 006 0313 Han Modular Hinged frame for 3 modules Hinged frame for 4 modules Hinged frame for 6 modules 10 B 09 14 010 0303 09 14 010 0313 16 B 09 14 016 0303 09 14 016 0313 24 B 09 14 024 0303 09 14 024 0313 Panel cut out Size 6B 10 B 16 B 24 B Locking element -for hinged frames (20 pieces per bloc) 09 14 000 9960 1) Distance max. 20.5 mm 2) Hinged frames can be used either in hood or housing Both different markings must be used for one connector! 09 14 000 9960 A 35 49 64 94 B 44 57 77.5 104 C 52 66 85.5 112 Ideal to pre-assemble the hinged frames Stock items in bold type 06 . 13 Han-Modular® Docking frame Features • • • • • Blind mating connector system for drawer systems Direct panel mounting without housing Very robust design Solid pre-leading guid pins and float bushes Can be fixed with standard M4 screws Notice: Due the plastic material used in the docking frame without PE, the panel will need to be grounded separately Han Modular 06 . 14 Technical characteristics Specifications DIN EN 60 664-1 DIN EN 61 984   Docking frames Number of modules Material - Docking frames - Float washer Floating tolerance Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 4, 6 polycarbonate zinc die-cast ± 2 mm -40 °C ... +125 °C V0 ≥ 500 Han-Modular® Docking frame Part number Identification Marking A ... F 1) Marking a ... f 2) Docking frame for 4 modules Drawing Dimensions in mm 09 14 016 1701 ① floating tolerance ±2 mm Docking frame for 4 modules Han Modular 09 14 016 1711 Panel cut out Docking frame for 6 modules 09 14 024 1701 ① floating tolerance ±2 mm Docking frame for 6 modules 09 14 024 1711 Panel cut out Float washer to enable the frame to be float mounted using standard M4 fixing screws 1) Float mount 2) Fixed 09 14 000 9936 Stock items in bold type 06 . 15 Han-Modular® ECO Features • Suitable for all Han-Modular® single modules • The variant with PE connection uses pin 1 of the module as PE • Slim, space saving design • Low cost plastic hoods and housings Technical characteristics Specifications   Hoods/Housings Han Modular 06 . 16 DIN EN 60 664-1 DIN EN 61 984 Material - Hoods/Housings polycarbonate - Seal NBR - Cable seal Polyamide Limiting temperatures -40 °C ... +85 °C Flammability acc. to UL 94 V0 Degree of protection acc. to DIN EN 60 529 for coupled connector IP 20 / IP 65 Mechanical working life - mating cycles ≥ 500 Han-Modular® ECO Plastic hoods/housings with PE marking Identification Part number Hoods with PE marking (pin 1 = PE) IP 65 top entry 09 14 001 0421 Hoods with PE marking (pin 1 = PE) IP 20 top entry 09 14 001 0423 Hoods with PE marking (pin 1 = PE) IP 20 / IP 65 top entry 09 14 001 0321 Drawing Dimensions in mm Han Modular Panel cut out Range of delivery: 8 pieces per frame Coding pin 09 14 000 9929 Stock items in bold type 06 . 17 Han-Modular® ECO Plastic hoods/housings without PE Identification Han Modular Hoods without PE IP 65 top entry Hoods without PE IP 20 top entry Hoods without PE IP 20 / IP 65 top entry Part number Drawing Dimensions in mm 09 14 001 0420 09 14 001 0422 09 14 001 0320 Panel cut out Range of delivery: 8 pieces per frame Coding pin 09 14 000 9929 06 . 18 Stock items in bold type Notes Han Modular 06 . 19 Han® 200 A Axial module Features Technical characteristics Axial-screw termination No special tools required Power module for big wire gauge up to 70 mm² Suitable as a 3 + PE connector in a Han® 32 B housing • Compatible to the Han® 200 A module with crimp terminal Specifications • • • • DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 1 200 A 1000 V 8 kV 3 200 A 1000 V 8 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature 06 . 20 ➀ 24 B hoods/housings with 3 modules; wire gauge: 50 mm² ➁ 24 B hoods/housings with 3 modules; wire gauge: 70 mm² 1) geometric wire gauge Material Surface - hard-silver plated Contact resistance Screw terminal - Wire gauge 1) - AWG - Hexagonal driver - Stripping length - Tightening tourque copper alloy 3 µm Ag 0.2 mΩ 25 ... 70 mm² 2 ... 00 SW 5 16 mm mm² 25 Nm 8 35 8 50 9 70 10 Han® 200 A Axial module 1000  V 200  A Number of contacts 1 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Axial screw terminal 200 A Han Modular 25 ... 40 mm² 09 14 001 2663 09 14 001 2763 40 ... 70 mm² 09 14 001 2662 09 14 001 2762 25 ... 40 mm² 09 14 001 2668 09 14 001 2768 40 ... 70 mm² 09 14 001 2667 09 14 001 2767 Axial screw terminal 200 A PE (Ground) Identification Part number Drawing Dimensions in mm Hex key SW 5 for axial setscrew with grip 09 99 000 0364 adapter 3/8“ 09 99 000 0371 Stock items in bold type 06 . 21 Han® 200 A Crimp module Features Technical characteristics Specifications • Crimp termination • Contacts can be unlocked from the mating side • Compatible with Han® 200 A modules with axial screw terminal EN 50 124-1 DIN EN 60 664-1 DIN EN 61 984   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles Han Modular 1 200 A 1000 V 8 kV 3 200 A 1000 V 8 kV 3 ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 06 . 22 Ambient temperature ➀ 24 B hoods/housings with 3 modules; wire gauge: 50 mm² ➁ 24 B hoods/housings with 3 modules; wire gauge: 70 mm² Material Surface - hard-silver plated Contact resistance Crimp terminal - mm² Stripping length Max. insulation diameter copper alloy 3 µm Ag ≤ 0.3 mΩ 25 ... 70 mm² 22.5 mm 18 mm Han® 200 A Crimp module 1000  V 200  A Number of contacts 1 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Modul Han Modular 09 14 001 3001 Identification 09 14 001 3101 Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm Crimp contacts silver plated 25 09 11 000 6120 09 11 000 6220 35 09 11 000 6121 09 11 000 6221 Wire gauge ∅ Stripping length 50 09 11 000 6122 09 11 000 6222 70 09 11 000 6123 09 11 000 6223 25 35 50 70 7 8.2 10 11.5 22.5 mm 22.5 mm 22.5 mm 22.5 mm mm² mm² mm² mm² for stranded wire according to IEC 60 228 Class 5 Stock items in bold type 06 . 23 Han® 100 A Axial module Features • • • • Technical characteristics Axial-screw termination No special tools required Connect PE contact with special cable shoe Compatible to the Han® 100 A module with crimp terminal Specifications DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 2 100 A 1000 V 8 kV 3 100 A 1000 V 8 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature 06 . 24 ➀ 24 B hoods/housings with 3 modules; wire gauge: 35 mm² ➁ 24 B hoods/housings with 3 modules; wire gauge: 25 mm² 1) geometric wire gauge Material Surface - hard-silver plated Contact resistance Screw terminal - Wire gauge 1) - AWG - Hexagonal driver - Stripping length - Tightening tourque copper alloy 3 µm Ag 0.3 mΩ 10 ... 38 mm² 6 ... 2 SW 4 13 mm mm² 10 Nm 6 16 6 25 7 35 8 Han® 100 A Axial module 1000  V 100  A Number of contacts 2 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Axial screw terminal 100 A Han Modular 10 ... 25 mm² 09 14 002 2653 09 14 002 2753 16 ... 35 mm² 09 14 002 2651 09 14 002 2751 38 mm² 09 14 002 2650 09 14 002 2750 Identification Part number Drawing Dimensions in mm Hex key SW 4 for axial setscrew with grip 09 99 000 0363 adapter 3/8“ 09 99 000 0370 Cable shoe 16 mm² for PE extension Comment for hoods/ housings high construction only 09 14 000 9912 Please use pressing tools for non-insulated cable shoes following DIN 46 230 with 16 mm² range (eg. K25, co. Klauke) Stock items in bold type 06 . 25 Han® 100 A Crimp module Features • • • • Technical characteristics Crimp termination Unlock of contacts from mating side Connect PE contact with special cable shoe Compatible to Han® 100 A module with axial screw terminal Specifications DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Han Modular Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree 2 Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 100 A 1000 V 8 kV 3 100 A 1000 V 8 kV 3 ≥ 500   Contacts   Current carrying capacity The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Material Surface - hard-silver plated Contact resistance Crimp terminal - mm² Max. cable diameter copper alloy 3 µm Ag ≤ 0.3 mΩ 10 ... 35 mm² 14 mm Crimp zone (C) Operating current 09 11 000 6114 09 11 000 6116 09 11 000 6125 Ambient temperature ➀ 24 B hoods/housings with 3 modules; wire gauge: 16 mm² ➁ 24 B hoods/housings with 3 modules; wire gauge: 25 mm² 06 . 26 ➂ 24 B hoods/housings with 3 modules; wire gauge: 35 mm² 09 11 000 6135 Han® 100 A Crimp module 1000  V 100  A Number of contacts 2 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Modul Han Modular 09 14 002 3051 09 14 002 3151 09 99 000 0383 09 99 000 0383 Removal tool for TC contacts Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm Crimp contacts silver plated 10 09 11 000 6114 09 11 000 6214 16 09 11 000 6116 09 11 000 6216 25 09 11 000 6125 09 11 000 6225 35 09 11 000 6135 09 11 000 6235 Wire gauge ∅ Stripping length 10 16 25 35 4.3 5.5 7 8.2 19 mm 19 mm 19 mm 16 mm mm² mm² mm² mm² for stranded wire according to IEC 60 228 Class 5 Stock items in bold type 06 . 27 Han® 70 A Axial module Features • • • • • Technical characteristics Axial-screw termination 2 contacts (70 A) for power circuits Male inserts with protection collar Polarisation of module Male and female contacts are finger safe Specifications DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 2 70 A 1000 V 8 kV 3 70 A 1000 V 8 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature 06 . 28 ➀ 24 B hoods/housings with 6 modules; wire gauge: 6 mm² ➁ 24 B hoods/housings with 6 modules; wire gauge: 16 mm² ➂ 24 B hoods/housings with 6 modules; wire gauge: 22 mm² 1) geometric wire gauge Material Surface - hard-silver plated Contact resistance Screw terminal - Wire gauge 1) - AWG - Hexagonal driver - Stripping length - Tightening tourque copper alloy 3 µm Ag 0.5 mΩ 6 ... 22 mm² 8 ... 4 SW 2.5 mm² 6 10 16 22 mm 11+1 11+1 11+1 12.5+1 mm² Nm 6 2 10 3 16 4 22 5 Han® 70 A Axial module 1000  V 70  A Number of contacts 2 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Axial screw terminal 70 A Han Modular 6 ... 16 mm² 09 14 002 2646 09 14 002 2741 14 ... 22 mm² 09 14 002 2647 09 14 002 2742 Axial screw terminal 70 A with finger protected male contacts 6 ... 16 mm² 09 14 002 2641 14 ... 22 mm² 09 14 002 2642 Identification Part number Drawing Dimensions in mm Hex key SW 2.5 for axial setscrew Bit 1/4“ 09 99 000 0375 Stock items in bold type 06 . 29 Han® 40 A Axial module Features Technical characteristics Specifications • Axial-screw termination • No special tools required • Compatible to Han® 40 A module with crimp terminal DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 2 40 A 1000 V 8 kV 3 40 A 1000 V 8 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature 06 . 30 ➀ 24 B hoods/housings with 6 modules; wire gauge: 10 mm² ➁ 24 B hoods/housings with 6 modules; wire gauge: 6 mm² 1) geometric wire gauge Material Surface - hard-silver plated Contact resistance Screw terminal - Wire gauge 1) - AWG - Hexagonal driver - Stripping length - Tightening tourque copper alloy 3 µm Ag 0.5 mΩ 2.5 ... 10 mm² 14 ... 8 SW 2 mm² 2.5 4 6 10 mm 5+1 5+1 8+1 11+1 mm² 2.5 4 Nm 1.5 1.5 6 2 10 2 Han® 40 A Axial module 1000  V 40  A Number of contacts 2 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Axial screw terminal 40 A Han Modular 2.5 ... 8 mm² 09 14 002 2601 09 14 002 2701 6 ... 10 mm² 09 14 002 2602 09 14 002 2702 Contact arrangement view from termination side Identification Part number Drawing Dimensions in mm Hex key SW 2 for axial setscrew with grip 09 99 000 0313 Bit 1/4“ 09 99 000 0369 Stock items in bold type 06 . 31 Han® 40 A Crimp module Features Technical characteristics Specifications • Crimp termination • Compatible with Han® 40 A module with axial screw terminal DIN EN 60 664-1 DIN EN 61 984   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles Han Modular 2 40 A 1000 V 8 kV 3 40 A 1000 V 8 kV 3 ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 10 mm² 06 . 32 ➁ 24 B hoods/housings with 6 modules; wire gauge: 6 mm² Material Surface - hard-silver plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag ≤ 0.3 mΩ 1.5 ... 10 mm² 16 ... 8 Han® 40 A Crimp module 1000  V 40  A Number of contacts 2 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular 09 14 002 3002 09 14 002 3102 Contact arrangement view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm Crimp contacts Power contacts silver plated 1.5 2.5 4 6 10 09 32 000 6104 09 32 000 6105 09 32 000 6107 09 32 000 6108 09 32 000 6109 09 32 000 6204 09 32 000 6205 09 32 000 6207 09 32 000 6208 09 32 000 6209 Wire gauge ∅ Stripping length 1.5 mm² AWG 16 1.75 9 mm 2.5 mm² AWG 14 2.25 9 mm 4 mm² AWG 12 2.85 9.6 mm 6 mm² AWG 10 3.5 9.6 mm 10 mm² AWG 8 4.3 15 mm Stripping length a = 15 mm for cables ≥ 5 mm Stripping length a = 18 mm for cables ≥ 6.4 mm Stock items in bold type 06 . 33 Han® C Axial module Features Technical characteristics Specifications • Axial screw terminal • No special tools required for assembly • Compatible to Han® C module with crimp terminal DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 3 40 A 690 V 8 kV 3 40 A 690 V 8 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature 06 . 34 ➀ 24 B hoods/housings with 6 modules; wire gauge: 4 mm² ➁ 24 B hoods/housings with 6 modules; wire gauge: 6 mm² ➂ 24 B hoods/housings with 6 modules; wire gauge: 10 mm² 1) geometric wire gauge Material Surface - hard-silver plated Contact resistance Screw terminal - Wire gauge 1) - AWG - Hexagonal driver - Stripping length - Tightening tourque copper alloy 3 µm Ag 0.3 mΩ 2.5 ... 10 mm² 14 ... 8 SW 2 mm² 2.5 4 6 10 mm 5+1 5+1 8+1 11+1 mm² 2.5 4 Nm 1.5 1.5 6 2 10 2 Han® C Axial module 690  V 40  A Number of contacts 3 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Axial screw terminal 40 A Han Modular 2.5 ... 8 mm² 09 14 003 2601 09 14 003 2701 6 ... 10 mm² 09 14 003 2602 09 14 003 2702 Identification Part number Drawing Dimensions in mm Hex key SW 2 for axial setscrew with grip 09 99 000 0313 Bit 1/4“ 09 99 000 0369 Stock items in bold type 06 . 35 Han® C module Features Technical characteristics Specifications • Suitable for Han® C crimp contacts • Standard module for power up to 40 A • Compatible to Han® C module with axial screw terminal Approvals DIN EN 60 664-1 DIN EN 61 984 ,   Inserts Number of contacts 3 Electrical data acc. to EN 61 984 Cable diameter up to 5 mm 40 A 400/690 V 6 kV 3 Rated current 40 A Rated voltage conductor - ground 400 V Rated voltage conductor - conductor 690 V Rated impulse voltage 6 kV Pollution degree 3 Han Modular Cable diameter up to 7.5 mm Rated current Rated voltage Rated impulse voltage Pollution degree Rated voltage acc. to UL/CSA Rated current acc. to UL/CSA Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 4 mm² 06 . 36 ➁ 24 B hoods/housings with 6 modules; wire gauge: 6 mm² ➂ 24 B hoods/housings with 6 modules; wire gauge: 10 mm² 40 A 500 V 6 kV 3 40 A 500 V 6 kV 3 600 V 32 A ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts Material Surface - hard-silver plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag ≤ 0.3 mΩ 1.5 ... 10 mm² 16 ... 8 Han® C module 400 / 690  V 40  A Number of contacts 3 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal hM Order crimp contacts separately Cable diameter up to 5 mm Cable diameter up to 7.5 mm 09 14 003 3001 09 14 003 3002 09 14 003 3001 39.1 mm 09 14 003 3002 43.1 mm 09 14 003 3101 Han Modular hF 09 14 003 3101 40.7 mm 09 14 003 3102 44.7 mm 09 14 003 3102 Contact arrangement  view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm Crimp contacts Power contacts silver plated 1.5 2.5 4 6 10* 09 32 000 6104 09 32 000 6105 09 32 000 6107 09 32 000 6108 09 32 000 6109 * for modules 09 14 003 3002 and 09 14 003 3102 only 09 32 000 6204 09 32 000 6205 09 32 000 6207 09 32 000 6208 09 32 000 6209 Wire gauge ∅ Stripping length 1.5 mm² AWG 16 1.75 9 mm 2.5 mm² AWG 14 2.25 9 mm 4 mm² AWG 12 2.85 9.6 mm 6 mm² AWG 10 3.5 9.6 mm 10 mm² AWG 8 4.3 15 mm Stripping length a = 15 mm for cables ≥ 5 mm Stripping length a = 18 mm for cables ≥ 6.4 mm Stock items in bold type 06 . 37 Han® CC Protected module Features • • • • Technical characteristics Specifications Suitable for Han® C crimp contacts Designed for a high working voltage up to 830 V Finger safe male and female contacts High contact density DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 4 40 A 830 V 8 kV 3 40 A 830 V 8 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 4 mm² 06 . 38 ➁ 24 B hoods/housings with 6 modules; wire gauge: 6 mm² Material Surface - hard-silver plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag ≤ 0.3 mΩ 1.5 ... 6 mm² 16 ... 10 Han® CC Protected module 830  V 40  A Number of contacts 4 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular 09 14 004 3041 09 14 004 3141 Contact arrangement view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm Crimp contacts Power contacts silver plated 1.5 2.5 4 6 09 32 000 6104 09 32 000 6105 09 32 000 6107 09 32 000 6108 09 32 000 6204 09 32 000 6205 09 32 000 6207 09 32 000 6208 Wire gauge 1.5 2.5 4 6 mm² mm² mm² mm² AWG 16 AWG 14 AWG 12 AWG 10 ∅ Stripping length 1.75 2.25 2.85 3.5 9 mm 9 mm 9.6 mm 9.6 mm Stock items in bold type 06 . 39 Han® CD module Features Technical characteristics Specifications • 3 contacts (40 A) for power circuits and 4 contacts (10 A) for signal circuits • Ideal as motor drive connector • Male and female contacts are finger safe DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Han Modular Current carrying capacity Operating current Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 4 mm² 06 . 40 ➁ 24 B hoods/housings with 6 modules; wire gauge: 6 mm² 3/4 Signal contacts Rated current Rated voltage Rated impulse voltage Pollution degree 10 A 830 V 8 kV 3 10 A 830 V 8 kV 3 Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles   The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Number of contacts Electrical data acc. to EN 61 984 Power contacts Rated current Rated voltage Rated impulse voltage Pollution degree 40 A 830 V 8 kV 3 40 A 830 V 8 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts Material Surface - hard-silver plated - hard-gold plated Contact resistance Power contacts Signal contacts Crimp terminal - mm² Power contacts Signal contacts - AWG Power contacts Signal contacts Max. insulation diameter - Power contacts copper alloy 3 µm Ag 2 µm Au over 3 µm Ni ≤ 0.3 mΩ ≤ 3 mΩ 1.5 ... 6 mm² 0.14 ... 2.5 mm² 16 ... 10 26 ... 14 5 mm Han® CD module 830 / 830  V 10 / 40  A Number of contacts 3/4 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular 09 14 007 3001 09 14 007 3101 Contact arrangement view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm Crimp contacts Power contacts silver plated Signal contacts silver plated gold plated 1.5 2.5 4 6 09 32 000 6104 09 32 000 6105 09 32 000 6107 09 32 000 6108 09 32 000 6204 09 32 000 6205 09 32 000 6207 09 32 000 6208 0.14-0.37 0.5 0.75 1 1.5 2.5 09 15 000 6104 09 15 000 6103 09 15 000 6105 09 15 000 6102 09 15 000 6101 09 15 000 6106 09 15 000 6204 09 15 000 6203 09 15 000 6205 09 15 000 6202 09 15 000 6201 09 15 000 6206 0.14-0.37 0.5 0.75 1 1.5 2.5 09 15 000 6124 09 15 000 6123 09 15 000 6125 09 15 000 6122 09 15 000 6121 09 15 000 6126 09 15 000 6224 09 15 000 6223 09 15 000 6225 09 15 000 6222 09 15 000 6221 09 15 000 6226 Wire gauge 1.5 2.5 4 6 mm² mm² mm² mm² AWG 16 AWG 14 AWG 12 AWG 10 Wire gauge 0.14-0.37 0.5 0.75 1 1.5 2.5 mm² AWG 26-22 mm² AWG 20 mm² AWG 18 mm² AWG 18 mm² AWG 16 mm² AWG 14 ∅ Stripping length 1.75 2.25 2.85 3.5 9 mm 9 mm 9.6 mm 9.6 mm ∅ Stripping length 0.9 1.1 1.3 1.45 1.75 2.25 8 mm 8 mm 8 mm 8 mm 8 mm 6 mm Stock items in bold type 06 . 41 Han E® module Features Technical characteristics Specifications • Suitable for Han E® crimp contacts • Standard module for power up to 40 A DIN EN 60 664-1 DIN EN 61 984 Approvals ,   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL/CSA Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 6 16 A 500 V 6 kV 3 16 A 500 V 6 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 2.5 mm² 06 . 42 ➁ 24 B hoods/housings with 6 modules; wire gauge: 1.5 mm² Material Surface - hard-silver plated - hard-gold plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag 2 µm Au over 3 µm Ni ≤ 1 mΩ 0.14 ... 4 mm² 26 ... 12 Han E® module 500  V 16  A Number of contacts 6 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular 09 14 006 3001 09 14 006 3101 Contact arrangement view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Crimp contacts Operating contact Identification Power contacts silver plated gold plated Relay contact silver plated Dimensions in mm 0.14-0.37 0,14-0,37 0,5 0.5 0,75 0.75 1 1,5 1.5 2,5 2.5 3 4 09 33 000 6127 09 33 000 6121 09 33 000 6114 09 33 000 6105 09 33 000 6104 09 33 000 6102 09 33 000 6106 09 33 000 6107 09 33 000 6227 09 33 000 6220 09 33 000 6214 09 33 000 6205 09 33 000 6204 09 33 000 6202 09 33 000 6206 09 33 000 6207 0.14-0.37 0,14-0,37 0.5 0,5 0.75 0,75 1 1.5 1,5 2.5 2,5 4 09 33 000 6117 09 33 000 6122 09 33 000 6115 09 33 000 6118 09 33 000 6116 09 33 000 6123 09 33 000 6119 09 33 000 6217 09 33 000 6222 09 33 000 6215 09 33 000 6218 09 33 000 6216 09 33 000 6223 09 33 000 6221 0.75-1 0,75-1 1.5 1,5 2.5 2,5 09 33 000 6109 09 33 000 6110 09 33 000 6111 Identification Crimp contacts 0.14 ... 0.37 mm² only used with BUCHANAN crimping tool 09 99 000 0001 Relay contact Wire gauge no groove 0.14-0.37 mm² AWG 26-22 no groove 0.5 mm² AWG 20 1 groove* 0.75 mm² AWG 18 1 groove 1 mm² AWG 18 2 grooves 1.5 mm² AWG 16 3 grooves 2.5 mm² AWG 14 wide groove 3 mm² AWG 12 no groove 4 mm² AWG 12 Stripping length 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm * on the back crimp collar Stock items in bold type 06 . 43 Han® EE module Features Technical characteristics Specifications • Suitable for Han E® crimp contacts • High contact density • Compatible to the Han® EE module with Quick Lock terminal DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 8 16 A 400 V 6 kV 3 16 A 400 V 6 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 2.5 mm² 06 . 44 ➁ 24 B hoods/housings with 6 modules; wire gauge: 1.5 mm² Material Surface - hard-silver plated - hard-gold plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag 2 µm Au over 3 µm Ni ≤ 1 mΩ 0.14 ... 4 mm² 26 ... 12 Han® EE module 400  V 16  A Number of contacts 8 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular 09 14 008 3001 09 14 008 3101 Contact arrangement view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Crimp contacts Operating contact Identification Power contacts silver plated gold plated Relay contact silver plated Dimensions in mm 0.14-0.37 0.5 0.75 1 1.5 2.5 3 4 09 33 000 6127 09 33 000 6121 09 33 000 6114 09 33 000 6105 09 33 000 6104 09 33 000 6102 09 33 000 6106 09 33 000 6107 09 33 000 6227 09 33 000 6220 09 33 000 6214 09 33 000 6205 09 33 000 6204 09 33 000 6202 09 33 000 6206 09 33 000 6207 0.14-0.37 0.5 0.75 1 1.5 2.5 4 09 33 000 6117 09 33 000 6122 09 33 000 6115 09 33 000 6118 09 33 000 6116 09 33 000 6123 09 33 000 6119 09 33 000 6217 09 33 000 6222 09 33 000 6215 09 33 000 6218 09 33 000 6216 09 33 000 6223 09 33 000 6221 0.75-1 1.5 2.5 09 33 000 6109 09 33 000 6110 09 33 000 6111 Identification Crimp contacts 0.14 ... 0.37 mm² only used with BUCHANAN crimping tool 09 99 000 0001 Relay contact Wire gauge no groove 0.14-0.37 mm² AWG 26-22 no groove 0.5 mm² AWG 20 1 groove* 0.75 mm² AWG 18 1 groove 1 mm² AWG 18 2 grooves 1.5 mm² AWG 16 3 grooves 2.5 mm² AWG 14 wide groove 3 mm² AWG 12 no groove 4 mm² AWG 12 Stripping length 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm * on the back crimp collar Stock items in bold type 06 . 45 Han® EE Quick Lock module Features • • • • Technical characteristics Innivative Han-Quick Lock® termination technology Field assembly without special tools Compatible to Han® EE module with crimp terminal Reduced wiring times Specifications DIN EN 60 664-1 DIN EN 61 984   Inserts Han Modular Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree 8 Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 16 A 400 V 6 kV 3 16 A 400 V 6 kV 3 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 1.5 mm² ➁ 24 B hoods/housings with 6 modules; wire gauge: 2.5 mm² 06 . 46 Material Surface - hard-silver plated Contact resistance Quick Lock termination - mm² - AWG copper alloy 3 µm Ag ≤ 1 mΩ 0.5 ... 2.5 mm² 20 ... 14 Han® EE Quick Lock module 400  V 16  A Number of contacts 8 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Quick Lock termination 09 14 008 2633 Han Modular 09 14 008 2733 Contact arrangement view from termination side Stock items in bold type 06 . 47 Han E® Protected module Features Technical characteristics Specifications • Suitable for Han E® crimp contacts • designed for a high working voltage up to 830 V • finger safe male and female contacts DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 6 16 A 830 V 8 kV 3 16 A 830 V 8 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 1.5 mm² 06 . 48 ➁ 24 B hoods/housings with 6 modules; wire gauge: 2.5 mm² ➂ 24 B hoods/housings with 6 modules; wire gauge: 4 mm² Material Surface - hard-silver plated - hard-gold plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag 2 µm Au over 3 µm Ni ≤ 1 mΩ 0.14 ... 4 mm² 26 ... 12 Han E® Protected module 830  V 16  A Number of contacts 6 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular 09 14 006 3041 09 14 006 3141 Contact arrangement view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Crimp contacts Operating contact Identification Power contacts silver plated gold plated Relay contact silver plated Dimensions in mm 0.14-0.37 0.5 0.75 1 1.5 2.5 3 4 09 33 000 6127 09 33 000 6121 09 33 000 6114 09 33 000 6105 09 33 000 6104 09 33 000 6102 09 33 000 6106 09 33 000 6107 09 33 000 6227 09 33 000 6220 09 33 000 6214 09 33 000 6205 09 33 000 6204 09 33 000 6202 09 33 000 6206 09 33 000 6207 0.14-0.37 0.5 0.75 1 1.5 2.5 4 09 33 000 6117 09 33 000 6122 09 33 000 6115 09 33 000 6118 09 33 000 6116 09 33 000 6123 09 33 000 6119 09 33 000 6217 09 33 000 6222 09 33 000 6215 09 33 000 6218 09 33 000 6216 09 33 000 6223 09 33 000 6221 0.75-1 1.5 2.5 09 33 000 6109 09 33 000 6110 09 33 000 6111 Identification Crimp contacts 0.14 ... 0.37 mm² only used with BUCHANAN crimping tool 09 99 000 0001 Relay contact Wire gauge no groove 0.14-0.37 mm² AWG 26-22 no groove 0.5 mm² AWG 20 1 groove* 0.75 mm² AWG 18 1 groove 1 mm² AWG 18 2 grooves 1.5 mm² AWG 16 3 grooves 2.5 mm² AWG 14 wide groove 3 mm² AWG 12 no groove 4 mm² AWG 12 Stripping length 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm * on the back crimp collar Stock items in bold type 06 . 49 Han® EEE module Features • • • • Technical characteristics Specifications Suitable for Han E® crimp contacts High contact density Up to 16 A per contact Also suitable as a reliable signal connector DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 20 16 A 500 V 6 kV 3 16 A 500 V 6 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 3 modules; wire gauge: 1.5 mm² 06 . 50 ➁ 24 B hoods/housings with 3 modules; wire gauge: 2.5 mm² ➂ 24 B hoods/housings with 3 modules; wire gauge: 4 mm² Material Surface - hard-silver plated - hard-gold plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag 2 µm Au over 3 µm Ni ≤ 1 mΩ 0.14 ... 4 mm² 26 ... 12 Han® EEE module 500  V 16  A Number of contacts 20 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular 09 14 020 3001 09 14 020 3101 Contact arrangement view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Crimp contacts Operating contact Identification Power contacts silver plated gold plated Relay contact silver plated Dimensions in mm 0.14-0.37 0.5 0.75 1 1.5 2.5 3 4 09 33 000 6127 09 33 000 6121 09 33 000 6114 09 33 000 6105 09 33 000 6104 09 33 000 6102 09 33 000 6106 09 33 000 6107 09 33 000 6227 09 33 000 6220 09 33 000 6214 09 33 000 6205 09 33 000 6204 09 33 000 6202 09 33 000 6206 09 33 000 6207 0.14-0.37 0.5 0.75 1 1.5 2.5 4 09 33 000 6117 09 33 000 6122 09 33 000 6115 09 33 000 6118 09 33 000 6116 09 33 000 6123 09 33 000 6119 09 33 000 6217 09 33 000 6222 09 33 000 6215 09 33 000 6218 09 33 000 6216 09 33 000 6223 09 33 000 6221 0.75-1 1.5 2.5 09 33 000 6109 09 33 000 6110 09 33 000 6111 Identification Crimp contacts 0.14 ... 0.37 mm² only used with BUCHANAN crimping tool 09 99 000 0001 Relay contact Wire gauge no groove 0.14-0.37 mm² AWG 26-22 no groove 0.5 mm² AWG 20 1 groove* 0.75 mm² AWG 18 1 groove 1 mm² AWG 18 2 grooves 1.5 mm² AWG 16 3 grooves 2.5 mm² AWG 14 wide groove 3 mm² AWG 12 no groove 4 mm² AWG 12 Stripping length 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm 7.5 mm * on the back crimp collar Stock items in bold type 06 . 51 Han® ES module Features Technical characteristics Specifications • Cage-clamp terminal • No special tools required DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 5 16 A 400 V 6 kV 3 16 A 400 V 6 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 2.5 mm² 06 . 52 ➁ 24 B hoods/housings with 6 modules; wire gauge: 1.5 mm² Material Surface - hard-silver plated Contact resistance Cage clamp terminal - mm² - AWG copper alloy 3 µm Ag ≤ 3 mΩ 0.14 ... 2.5 mm² 26 ... 14 Han® ES module 400  V 16  A Number of contacts 5 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Cage-clamp terminal Han Modular 09 14 005 2616 09 14 005 2716 Contact arrangement view from termination side Stock items in bold type 06 . 53 Han® HV module Features • • • • Technical characteristics Specifications Suitable for Han E® crimp contacts 2 contacts up to 5000 V Insulator out of a voltage resistant teflon material Combination of all other modules (pneumatic, signal etc.) DIN EN 61 984 DIN VDE 0115 DIN EN 60 664-1 Approvals   Inserts Number of contacts 2 Electrical data acc. to EN 61 984 16 A 2900/5000 V 15 kV 3 Rated current 16 A Rated voltage conductor - ground 2900 V Rated voltage conductor - conductor 5000 V Rated impulse voltage 15 kV Pollution degree 3 Han Modular Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles ≥ 1010 Ω polycarbonate/Teflon (PTFE) -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Material Surface - hard-silver plated - hard-gold plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag 2 µm Au over 3 µm Ni ≤ 1 mΩ 0.5 ... 4 mm² 20 ... 12 Assembly instructions Locking sleeve Cable Operating current Han E® Crimp contact Ambient temperature ➀ Housing Han® 16 B with 1 Han® HV module, wire gauge: 2.5 mm² 06 . 54 Crimp with BUCHANAN crimping tool 09 99 000 0001 Snap crimped cable in the insert shrink the heat shrink tube over the rear of contact Han® HV module 2900 / 5000  V 16  A Number of contacts 2 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular Range of delivery: - 1 module - 2 locking sleeves - 2 heat shrink tubes 09 14 002 3021 09 14 002 3121 09 99 000 0327 09 99 000 0327 Removal tool for locking sleeve Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Crimp contacts Operating contact Identification silver plated Dimensions in mm 0.5 0.75 1 1.5 2.5 3 4 09 33 000 6121 09 33 000 6114 09 33 000 6105 09 33 000 6104 09 33 000 6102 09 33 000 6106 09 33 000 6107 09 33 000 6220 09 33 000 6214 09 33 000 6205 09 33 000 6204 09 33 000 6202 09 33 000 6206 09 33 000 6207 Identification no groove 1 groove* 1 groove 2 grooves 3 grooves wide groove no groove Wire gauge 0.5 mm² 0.75 mm² 1 mm² 1.5 mm² 2.5 mm² 3 mm² 4 mm² AWG 20 AWG 18 AWG 18 AWG 16 AWG 14 AWG 12 AWG 12 Stripping length 9.5 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mm * on the back crimp collar Stock items in bold type 06 . 55 Han® HV module Features • • • • Suitable for Han® C crimp contacts 2 contacts up to 5000 V Insulator out of a voltage resistant teflon material Combination of all other modules (pneumatic, signal etc.) Technical characteristics Specifications DIN EN 61 984 DIN VDE 0115 DIN EN 60 664-1   Inserts Number of contacts 2 Electrical data acc. to EN 61 984 40 A 2900/5000 V 15 kV 3 Rated current 40 A Rated voltage conductor - ground 2900 V Rated voltage conductor - conductor 5000 V Rated impulse voltage 15 kV Pollution degree 3 Han Modular Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Max. cable diameter Mechanical working life - mating cycles ≥ 1010 Ω polycarbonate/Teflon (PTFE) -40 °C ... +125 °C V0 9 mm ≥ 500   Contacts Material Surface - hard-silver plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag ≤ 0.3 mΩ 1.5 ... 10 mm² 16 ... 8 Assembly instructions Han® C Crimp contact Locking sleeve Cable Crimp with tool 0999 000 0001, 0999 000 0110 or 0999 000 0377 Snap crimped cable in the insert 06 . 56 shrink the heat shrink tube over the rear of contact Han® HV module 2900 / 5000  V 40  A Number of contacts 2 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular :Range of delivery: - 1 module - 2 locking sleeves - 2 heat shrink tubes 09 14 002 3023 09 14 002 3123 09 99 000 0327 09 99 000 0327 Removal tool for locking sleeve Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm Crimp contacts Power contacts silver plated 1.5 2.5 4 6 10 09 32 000 6104 09 32 000 6105 09 32 000 6107 09 32 000 6108 09 32 000 6109 09 32 000 6204 09 32 000 6205 09 32 000 6207 09 32 000 6208 09 32 000 6209 Wire gauge 1.5 2.5 4 6 10 mm² mm² mm² mm² mm² AWG 16 AWG 14 AWG 12 AWG 10 AWG 8 ∅ Stripping length 1.75 2.25 2.85 3.5 4.3 13 mm 13 mm 13 mm 13 mm 13 mm Stock items in bold type 06 . 57 Han DD® module Features Technical characteristics Specifications • Suitable for Han D® crimp contacts • Standard module for power up to 10 A DIN EN 60 664-1 DIN EN 61 984 Approvals ,   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL/CSA Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 12 10 A 250 V 4 kV 3 10 A 250 V 4 kV 3 600 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 1.5 mm² 06 . 58 ➁ 24 B hoods/housings with 6 modules; wire gauge: 1.0 mm² Material Surface - hard-silver plated - hard-gold plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag 2 µm Au over 3 µm Ni ≤ 3 mΩ 0.14 ... 2.5 mm² 26 ... 14 Han DD® module 250  V 10  A Number of contacts 12 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular 09 14 012 3001 09 14 012 3101 Contact arrangement view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm Crimp contacts Power contacts silver plated gold plated 0.14-0.37 0.5 0.75 1 1.5 2.5 09 15 000 6104 09 15 000 6103 09 15 000 6105 09 15 000 6102 09 15 000 6101 09 15 000 6106 09 15 000 6204 09 15 000 6203 09 15 000 6205 09 15 000 6202 09 15 000 6201 09 15 000 6206 0.14-0.37 0.5 0.75 1 1.5 2.5 09 15 000 6124 09 15 000 6123 09 15 000 6125 09 15 000 6122 09 15 000 6121 09 15 000 6126 09 15 000 6224 09 15 000 6223 09 15 000 6225 09 15 000 6222 09 15 000 6221 09 15 000 6226 20 10 001 3211 20 10 001 3221 Wire gauge 0.14-0.37 0.5 0.75 1 1.5 2.5 mm² AWG 26-22 mm² AWG 20 mm² AWG 18 mm² AWG 18 mm² AWG 16 mm² AWG 14 ∅ Stripping length 0.9 1.1 1.3 1.45 1.75 2.25 8 mm 8 mm 8 mm 8 mm 8 mm 6 mm F.O. contacts for 1 mm plastic fibre Stock items in bold type 06 . 59 Han DD® Quick Lock module Features Technical characteristics • Innovative Han-Quick Lock® termination technology • Field assembly without special tools • Mating compatible with standard Han® DD module with crimp terminal • Reduced wiring times Specifications DIN EN 60 664-1 DIN EN 61 984   Inserts Han Modular Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree 12 Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 10 A 250 V 4 kV 3 10 A 250 V 4 kV 3   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 ① Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 1.5 mm² 06 . 60 Material Surface - hard-silver plated Contact resistance Quick Lock termination - mm² - AWG copper alloy 3 µm Ag ≤ 3 mΩ 0.25 ... 1.5 mm² 22 ... 16 Han DD® Quick Lock module 250  V 10  A Number of contacts 12 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Quick Lock termination 09 14 012 2632 Han Modular 09 14 012 2732 Contact arrangement view from termination side Stock items in bold type 06 . 61 Han® DDD module Features Technical characteristics Specifications • Suitable for Han D® crimp contacts • High contact density DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Han Modular Rated voltage acc. to UL Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 17 10 A 160 V 2.5 kV 3 10 A 160 V 2.5 kV 3 250 V ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Contacts   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 1.5 mm² 06 . 62 ➁ 24 B hoods/housings with 6 modules; wire gauge: 1.0 mm² Material Surface - hard-silver plated - hard-gold plated Contact resistance Crimp terminal - mm² - AWG copper alloy 3 µm Ag 2 µm Au over 3 µm Ni ≤ 3 mΩ 0.14 ... 2.5 mm² 26 ... 14 Han® DDD module 160  V 10  A Number of contacts 17 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular 09 14 017 3001 09 14 017 3101 Contact arrangement view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm Crimp contacts Power contacts silver plated gold plated 0.14-0.37 0.5 0.75 1 1.5 2.5 09 15 000 6104 09 15 000 6103 09 15 000 6105 09 15 000 6102 09 15 000 6101 09 15 000 6106 09 15 000 6204 09 15 000 6203 09 15 000 6205 09 15 000 6202 09 15 000 6201 09 15 000 6206 0.14-0.37 0.5 0.75 1 1.5 2.5 09 15 000 6124 09 15 000 6123 09 15 000 6125 09 15 000 6122 09 15 000 6121 09 15 000 6126 09 15 000 6224 09 15 000 6223 09 15 000 6225 09 15 000 6222 09 15 000 6221 09 15 000 6226 20 10 001 3211 20 10 001 3221 Wire gauge 0.14-0.37 0.5 0.75 1 1.5 2.5 mm² AWG 26-22 mm² AWG 20 mm² AWG 18 mm² AWG 18 mm² AWG 16 mm² AWG 14 ∅ Stripping length 0.9 1.1 1.3 1.45 1.75 2.25 8 mm 8 mm 8 mm 8 mm 8 mm 6 mm F.O. contacts for 1 mm plastic fibre Stock items in bold type 06 . 63 Han® High Density module Features Technical characteristics Specifications • Suitable for D-Sub crimp contacts • High contact density • Using of guiding pins (male and female) is recommended (see chapter 40). DIN EN 60 664-1 DIN EN 61 984   Inserts Han Modular Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree 25 Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 4 A 50 V 0.8 kV 3 4A 50 V 0.8 kV 3 ≥ 500   Contacts Crimp terminal - mm² - AWG   Current carrying capacity Operating current The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 06 . 64 Ambient temperature ➀ 24 B hoods/housings with 6 modules; wire gauge: 0.5 mm² turned contacts ➁ 24 B hoods/housings with 6 modules; wire gauge: 0.5 mm² stamped contacts turned contacts 0.08 ... 0.52 mm² 28 ... 20 Performance level 1 as per CECC 75 301-802, 500 mating cycles, 10 days 4 mixed gas test IEC 60 512 Han® High Density module 50  V 4  A Number of contacts 25 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately Han Modular 09 14 025 3001 09 14 025 3101 Contact arrangement view from termination side Identification Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm D-Sub crimp contacts 0.08-0.21 0,08-0,21 0,13-0,33 0.13-0.33 0,33-0,52 0.33-0.52 61 03 000 0078 61 03 000 0094 61 03 000 0073 61 03 000 0080 61 03 000 0096 61 03 000 0074 09 99 000 0368 09 99 000 0368 Wire gauge Stripping length 0.08-0.21 mm² AWG 28-24 0.13-0.33 mm² AWG 26-22 0.33-0.52 mm² AWG 22-20 5 mm 5 mm 5 mm Insertion / Removal tool for D-Sub crimp contacts Stock items in bold type 06 . 65 Han® D-Sub module Features • • • • Han Modular 06 . 66 9-pin D-Sub connector of the Han-Modular® system Ideal for the transmission of sensetive signals Compatible to crimp, solder or IDC termination Using of guiding pins (male and female) is recommended (see chapter 40). Technical characteristics Specifications DIN EN 60 664-1 DIN EN 61 984   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 9 5 A 50 V 0.8 kV 3 5A 50 V 0.8 kV 3 ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500 Han® D-Sub module     Number of contacts 9 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately (see page 06.65) 09 14 009 3001 09 14 009 3101 for one cable 09 14 000 9930 09 14 000 9931 for two cables 09 14 000 9932 09 14 000 9933 Han Modular Adapter module without D-Sub insert Screw terminal for RS 485-based bus systems with T-functionality 09 14 009 3151 Contact arrangement view from termination side Signal Contact no. A 8 B 3 Stock items in bold type 06 . 67 Han® USB module Features • According to USB 2.0 specification • Simple and cost effective termination by plug in patch cable • Cable tie strain relief Technical characteristics Specifications   Inserts Han Modular 06 . 68 DIN EN 60 664-1 DIN EN 61 984 Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 4 1 A 50 V 0.8 kV 3 1A 50 V 0.8 kV 3 ≥ 1010 Ω polycarbonate -40 °C ... +85 °C V0 ≥ 500 Han® USB module     Number of contacts 4 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Module for patch cable Male insert Han Modular 09 14 001 4601 Module for patch cable Female insert 09 14 001 4701 Module for screw termination Male insert 09 14 001 4651 Patch cable USB male / male Style A 2m 39 50 903 0050 2m 39 50 903 0050 5m 39 50 903 0051 5m 39 50 903 0051 Stock items in bold type 06 . 69 Han® FireWire module Features • Compatibel to IEEE 1394 • Simple and cost effective termination by plug in patch cable • Cable tie strain relief Technical characteristics Specifications   Inserts Han Modular 06 . 70 DIN EN 60 664-1 DIN EN 61 984 Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 6 1 A 50 V 0.8 kV 3 1A 50 V 0.8 kV 3 ≥ 1010 Ω polycarbonate -40 °C ... +85 °C V0 ≥ 500 Han® FireWire module     Number of contacts 6 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Module for patch cable Male insert Han Modular 09 14 001 4611 Module for patch cable Female insert 09 14 001 4711 Stock items in bold type 06 . 71 Han® RJ45 module Technical characteristics Features • Single module with standard shielded RJ45 plug and jack • Cat 5e for all data pairs (all 8 pins) • Conforming to the RoHS directive • The RJ45 inserts are protected by a reliable plastic insulator • Patch cables are assembled/removed without tools Han Modular 06 . 72 Technical characteristics Specifications DIN EN 60 664-1 DIN EN 61 984   Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree Transmission features Transmission rate Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 8 1 A 50 V 0.8 kV 3 1A 50 V 0.8 kV 3 Category 5 / Class D up to 100 MHz; acc. to ISO/IEC 11 801:2002 and EN 50 173-1 10/100 Mbit/s ≥ 1010 Ω polycarbonate -40 °C ... +85 °C V0 ≥ 500 Han® RJ45 module     Number of contacts 8 Part number Identification Male insert (M) Female insert (F) Gender Changer Drawing Dimensions in mm 09 14 001 4721 for patch cable Han Modular Male insert for patch cable Adapter for HARTING patch cable 09 14 001 4623 09 14 000 9966 Stock items in bold type 06 . 73 Han® RJ45 module Patch cables Features • Locking lever protection for RJ45 connector latch • Very short plug design in combination with robust bend protection • RoHS compliant • Fully EMC screened (aluminium-clad foil and braid) Technical characteristics Specifications ISO/IEC 24 702 ISO/IEC 11 801 ISO/IEC 61 935-2   Cat. 5 e RJ45 patch cable Transmission features Transmission rate Cable type Material cables Limiting temperatures - mobile - stationary Flammability Degree of protection Han Modular Category 5 / Class D up to 100 MHz; acc. to ISO/IEC 24 702 or ISO/IEC 11 801 10/100/1000 Mbit/s 1:1 EIA/TIA 568 B, 8 poles SF/UTP, PUR, yellow 0 °C ... +60 °C -40 °C ... +80 °C flame retardant, halogen-free IP 20   Cat. 6 RJ45 patch cable Transmission features Transmission rate Cable type Material cables Limiting temperatures - mobile - stationary Flammability Degree of protection 06 . 74 Category 6 / Class E up to 250 MHz; acc. to ISO/IEC 24 702 or ISO/IEC 11 801 10/100/1000 Mbit/s 1:1 EIA/TIA 568 B, 8 poles SF/UTP, PUR, yellow 0 °C ... +60 °C -20 °C ... +80 °C flame retardant, halogen-free IP 20 Han® RJ45 module Patch cables     Number of contacts 8 Identification Part number Drawing Dimensions in mm Cat. 5e RJ45 patch cable Length 0.2 m 0.3 m 0.4 m 0.5 m 0.6 m 0.7 m 0.8 m 0.9 m 1.0 m 1.5 m 2.0 m 2.5 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 m 7.5 m 8.0 m 9.0 m 10 m 15 m 20 m 09 47 474 7001 09 47 474 7002 09 47 474 7003 09 47 474 7004 09 47 474 7005 09 47 474 7006 09 47 474 7007 09 47 474 7008 09 47 474 7009 09 47 474 7010 09 47 474 7011 09 47 474 7012 09 47 474 7013 09 47 474 7014 09 47 474 7015 09 47 474 7016 09 47 474 7017 09 47 474 7018 09 47 474 7019 09 47 474 7020 09 47 474 7021 09 47 474 7022 09 47 474 7023 0.2 m 0.3 m 0.4 m 0.5 m 0.6 m 0.7 m 0.8 m 0.9 m 1.0 m 1.5 m 2.0 m 2.5 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 m 7.5 m 8.0 m 9.0 m 10 m 15 m 20 m 09 47 474 7101 09 47 474 7102 09 47 474 7103 09 47 474 7104 09 47 474 7105 09 47 474 7106 09 47 474 7107 09 47 474 7108 09 47 474 7109 09 47 474 7110 09 47 474 7111 09 47 474 7112 09 47 474 7113 09 47 474 7114 09 47 474 7115 09 47 474 7116 09 47 474 7117 09 47 474 7118 09 47 474 7119 09 47 474 7120 09 47 474 7121 09 47 474 7122 09 47 474 7123 Han Modular Cat. 6 RJ45 patch cable Length Stock items in bold type 06 . 75 Han® RJ45 module RJ Industrial Features Technical characteristics Han-Modular® RJ Industrial RJ45 connector set • Conforming to the RoHS directive • 360° shielded contact • Field assembly without tools possible by means of HARAX® rapid termination in IDC technology • Suitable for termination of massive and flexible wires Specifications IEC 60 603-7 DIN EN 60 664-1 DIN EN 61 984   HARTING RJ Industrial®, 4 pins Number of contacts Transmission features Transmission rate Wire termination Terminated cable - Conductor cross section flexible solid - Cable outside diameter Material insert Limiting temperatures Han-Modular® RJ Industrial Gigalink RJ45 connector set • Conforming to the RoHS directive • 360° shielded contact Han • Field assembly by means of piercing contacts Modular • Suitable for termination of flexible wires 4 Category 5 / Class D up to 100 MHz; acc. to ISO/IEC 11 801:2002 and EN 50 173-1 10/100 Mbit/s IDC contacts; without tools AWG 24/7 ... AWG 22/7 AWG 23/1 ... AWG 22/1 ≤ 1.6 mm polyamide -40 °C ... +70 °C   HARTING RJ Industrial® Gigalink, 8 pins Number of contacts Transmission features Transmission rate Wire termination Terminated cable - Conductor cross section flexible - Cable outside diameter Material insert Limiting temperatures 8 Category 6 / Class E up to 250 MHz; acc. to ISO/IEC 11 801:2002 and EN 50 173-1 10/100/1000 Mbit/s Piercing contacts AWG 28/7 ... AWG 24/7 ≤ 1.05 mm polyamide -40 °C ... +70 °C   HARTING RJ Industrial® 10G, 8 pins Number of contacts Transmission features Transmission rate Wire termination Terminated cable - Conductor cross section flexible solid - Cable outside diameter Material insert Limiting temperatures 06 . 76 8 Category 6 / Class E up to 250 MHz; acc. to ISO/IEC 11 801:2002 and EN 50 173-1 10/100/1000 Mbit/s IDC contacts; without tools AWG 27/7 ... AWG 22/7 AWG 27/1 ... AWG 22/1 ≤ 1.5 mm polyamide -40 °C ... +70 °C Han® RJ45 module RJ Industrial     Number of contacts 4/8 Identification Part number Male insert (M) Drawing Dimensions in mm Han-Modular® RJ Industrial RJ45 connector set Han Modular Cat. 5 4 pins for AWG 24 ... 22 09 45 400 1100 4 pins for AWG 26 09 45 400 1109 Cat. 6 Gigalink, 8 pins 09 45 400 1500 Gigalink, 8 pins 09 45 400 1510 Cat. 6 10G, 8 pins 09 45 400 1560 Set consists of the relevant RJ45 insert and the suitable adapter for Han® RJ45 module, male, part number 09 14 001 4623 HARTING RJ Industrial® Gigalink Assembly tool 09 45 800 0500 * usuable with male insert 09 14 001 4623 (see page 06.73) Stock items in bold type 06 . 77 Han® GigaBit module Features • Shielding bus separate from housing potential • Ideal for the transmission of sensetive signals (e.g. bus signals) • Usuable for Gigabit Ethernet Cat. 6 Technical characteristics Specifications   Inserts Han Modular DIN EN 60 664-1 DIN EN 61 984 Number of contacts Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles 8 ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   GigaBit contacts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage Rated impulse voltage Pollution degree 8 + shielding 5 A 50 V 0.8 kV 3 5A 50 V 0.8 kV 3 Material - Insulator - Outer conductor Contact resistance Limiting temperatures Flammability acc. to UL 94 Outer surface finish Cable diameter polycarbonate zinc alloy ≤ 4 mΩ -40 °C ... +85 °C V0 nickel 5 ... 12 mm   D-Sub crimp contacts 06 . 78 Crimp terminal - mm² - AWG 0.08 ... 0.52 mm² 28 ... 20 turned contacts Performance level 1 Han® GigaBit module 50  V 5  A Number of contacts 8 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Han® GigaBit module Han Modular 09 14 001 3011 Identification 09 14 001 3111 Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm GigaBit contacts 8 + shielding Order crimp contacts separately 09 14 008 3011 09 14 008 3111 D-Sub crimp contacts 0,08-0,21 0,13-0,33 0,33-0,52 61 03 000 0078 61 03 000 0094 61 03 000 0073 61 03 000 0080 61 03 000 0096 61 03 000 0074 Wire gauge 0,08-0,21 mm² 0,13-0,33 mm² 0,33-0,52 mm² AWG 28-24 AWG 26-22 AWG 22-20 Stripping length 5 mm 5 mm 5 mm Stock items in bold type 06 . 79 Han® GigaBit module / Accessories Identification Part number Drawing Dimensions in mm Crimp flange Han Modular D1 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 D2 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 61 03 000 0062 61 03 000 0063 61 03 000 0064 61 03 000 0065 61 03 000 0066 61 03 000 0166 61 03 000 0067 61 03 000 0068 61 03 000 0069 61 03 000 0070 61 03 000 0071 61 03 000 0165 61 03 000 0072 D3 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 D4 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 61 03 000 0045 61 03 000 0046 61 03 000 0047 61 03 000 0048 61 03 000 0049 61 03 000 0050 61 03 000 0051 61 03 000 0052 61 03 000 0053 61 03 000 0054 61 03 000 0055 61 03 000 0056 61 03 000 0057 61 03 000 0058 61 03 000 0142 61 03 000 0059 61 03 000 0127 cable diameter approx. 5 ... 7 mm cable diameter approx. 7 ... 10 mm cable diameter approx. 10 ... 12 mm 61 03 000 0141 61 03 000 0044 61 03 000 0143 Crimp ferrule Cable clamp 06 . 80 Stock items in bold type Notes Han Modular 06 . 81 Han-Quintax® module Features • Shielding bus separate from housing potential • Perfect for transmission of sensitive signals (eg. bus signals) • The four pole Han® Quintax contact is suitable for Ethernet Cat. 5e and PROFIBUS when diagonally wiring of the data pairs. Han Modular Technical characteristics Specifications DIN EN 60 664-1 DIN EN 61 984 Approvals   Inserts Number of contacts 2 Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 ≥ 500   Quintax contacts Number of contacts - Quintax - High Density Quintax 4 + shielding 8 + shielding Electrical data acc. to EN 61 984 - Quintax - High Density Quintax Rated current Rated voltage Rated impulse voltage Pollution degree 10 A 50 V 5 A 50 V 10 A / 5 A 50 V 0.8 kV 3 Material - Insulator - Outer conductor Contact resistance Limiting temperatures Flammability acc. to UL 94 Outer surface finish Cable diameter polycarbonate zinc alloy ≤ 4 mΩ -40 °C ... +85 °C V0 nickel 3 ... 9.5 mm 0.8 kV 3 0.8 kV 3   Han D® contacts Material Surface - hard-gold plated Contact resistance Crimp terminal - mm² - AWG copper alloy 2 µm Au over 3 µm Ni ≤ 3 mΩ 0.14 ... 2.5 mm² 26 ... 14   D-Sub crimp contacts Crimp terminal - mm² - AWG turned contacts 06 . 82 0.08 ... 0.52 mm² 28 ... 20 Performance level 1 Han-Quintax® module Number of contacts 2 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal 09 14 002 3001 Han Modular 09 14 002 3101 Contact arrangement view from termination side Quintax metal adapter option 09 14 000 9915 Identification 09 14 000 9915 Wire gauge Part number (mm²) Male contact Female contact Drawing Dimensions in mm Quintax contact 4 + shielding Han D® crimp contacts Han D® Crimp contact gold plated 0.14-0.37 0.5 0.75 1 1.5 2.5 09 15 004 3013 09 15 004 3113 09 15 000 6124 09 15 000 6123 09 15 000 6125 09 15 000 6122 09 15 000 6121 09 15 000 6126 09 15 000 6224 09 15 000 6223 09 15 000 6225 09 15 000 6222 09 15 000 6221 09 15 000 6226 09 15 008 3013 09 15 008 3113 61 03 000 0078 61 03 000 0094 61 03 000 0073 61 03 000 0080 61 03 000 0096 61 03 000 0074 High Density Quintax contact 8 + shielding Han® D-Sub contacts D-Sub crimp contact Order crimp contacts separately 0.08-0.21 0.13-0.33 0.33-0.52 Stock items in bold type 06 . 83 Han® Coax module Features Technical characteristics • Well known Quintax concept • Suitable for contacts with large diameters • Han E® coax is applicable to the ETCS Eurobalise cable Specifications Approvals   Inserts Han Modular RF transmission characteristics Impedance 75 Ω Number of contacts 2 Insulation resistance Material Limiting temperatures Flammability acc. to UL 94 Mechanical working life - mating cycles ≥ 1010 Ω polycarbonate -40 °C ... +125 °C V0 Attenuation [db]/m Number of contacts Electrical data acc. to EN 61 984 - Han D® Coax - Han E® Coax Rated current Rated voltage Rated impulse voltage Pollution degree Impedance - Han D® Coax - Han E® Coax Material - Insulator - Outer conductor Contact resistance Limiting temperatures Flammability acc. to UL 94 Outer surface finish Cable diameter Frequency 75 Ω cable 75 Ω cable with Han D® Coax 75 Ω coax cable diameter shielding: 7.3 mm Impedance 50 Ω 1 + shielding 10 A 50 V 16 A 50 V 10 A / 16 A 50 V 0.8 kV 3 0.8 kV 3 0.8 kV 3 75 Ω 50 Ω polycarbonate zinc alloy ≤ 4 mΩ -40 °C ... +85 °C V0 nickel 3 ... 9.5 mm   Return loss [db] 35.4 Attenuation [db] 0.017 Han E® Coax with RG 213 cable (2.5 mm²) 200 500 1.0 1.2 1.5 2.0 2.5 MHz MHz GHz GHz GHz GHz GHz Return loss [db] 23.8 21.1 >18.7 >17.7 >16.4 >14.1 >12.0 Attenuation [db] 0.07 0.11 0.17 Han D® contacts 0.2