MTMM-132-10-T-S-420

HORIZONTAL & MODIFIED HEADERS (2.00 mm) .0787" PITCH • MMT/MTMM SERIES MMT/MTMM Board Mates: CLT, SQT*, SQW, ESQT, TLE, SMM, MMS Cable Mates: TCSD MMT Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Au or Sn over 50 µ" (1.27 µm) Ni Operating Temp Range: -55 °C to +105 °C with Tin; -55 °C to +125 °C with Gold PROCESSING - LEAD STYLE –01 ROW OPTION –F –02 = (4.45 mm) .175" post = Single Row –DH = Double Row –L = 10 µ" (0.25 µm) Gold post, Matte Tin on tail No. of positions x (2.00) .0787 OPTION –K = (4.00 mm) .157" DIA Polyimide Film Pick & Place Pad (3 positions min.) –P = Pick & Place Pad (2 positions min.) –MT = Double Row Mixed Technology –T (4.00) .157 - –SH = Gold flash on post, Matte Tin on tail —SH (2.00) .0787 - PLATING OPTION = (3.20 mm) .126" post No. of positions x (2.00) .0787 –“XXX” = Polarized Position Specify position of omitted pin = Matte Tin –TR —DH —MT POST (2.79) .110 —DH MTMM —MT -1 OAL –02 (6.48) .255 –03 (7.67) .302 –04 (8.20) .323 –05 (9.58) .377 –06 (10.08) .397 –07 (11.58) .456 –08 (12.09) .476 –09 (13.59) .535 –10 (14.10) .555 –11 (15.09) .594 –12 (15.60) .614 –13 (17.09) .673 –14 (19.08) .751 –15 (21.08) .830 (6.22) .245 —SH (2.79) .110 —MT —DH NO. PINS PER ROW –FR POST (6.22) .245 - LEAD STYLE 01 thru 50 LEAD STYLE = Tape & Reel (2.54) .100 (2.00) .0787 Lead–Free Solderable: Yes SMT Lead Coplanarity (MMT): (0.10 mm) .004" max (02-25) (0.15 mm) .006" max (26-36)* *(.004" stencil solution may be available; contact ipg@samtec.com) Note: Some lengths, styles and options are non-standard, non-returnable. - NO. PINS PER ROW 02 thru 36 *Important Note: SQT will not mate to the MMT –02 lead style . SPECIFICATIONS -1 - –F Specify LEAD STYLE from chart No. of positions x (2.00) .0787 PLATING OPTION = Gold flash on post, Matte Tin on tail –L (2.00) .0787 = 10 µ" (0.25 µm) Gold post, Matte Tin on tail (3.94) .155 - ALSO AVAILABLE MOQ Required Alignment pins Locking clips Molded pick & place pads ROW OPTION –S = Single Row –D = Double Row –Q = Quad Row - = Full Reel Tape & Reel (must order max. quantity per reel; contact Samtec for quantity breaks) POST HEIGHT –“XXX” = Post Height in inches (0.13 mm) .005" increments - OPTION –“XXX” = Polarized Position Specify position of omitted pin Example: –070 = (1.78 mm) .070" –T = Matte Tin (8.00) .315 (0.00) .000 MIN (1.50) .059 POST HEIGHT OAL –S –D (0.00) .000 MIN –Q samtec.com?MMT or samtec.com?MTMM Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice. F-224