09990000100

Manual crimping tools Identification Part No. Drawing Dimensions in mm HARTING crimping tool for individual contacts BC / FC and har-bus® 64 09 99 000 0620 Order crimping inserts separately Crimping insert set for individual contacts each set contains locator and crimp insert top and bottom part Wire gauge BC / FC 1 / har-bus® 64 09 99 000 0621 FC 2 FC 3 09 99 000 0622 09 99 000 0623 BC: 0.09 - 0.50 mm² FC 1: 0.09 - 0.25 mm² FC 2: 0.14 - 0.56 mm² FC 3: 0.50 - 1.50 mm² BC / har-bus® 64 solid wire 09 99 000 0629 BC: 0.13 mm² (solid wire) Locator BC / har-bus® 64 FC 09 99 000 0630 09 99 000 0631 Service case for crimping tool and 5 sets inserts, incl. ­screwdriver for insert change, without contents 09 99 000 0632 HARTING crimping tool Tooling for bandoliered contacts (500 pieces) BC / har-bus® 64 Wire gauge 09 99 000 0248 0.09 - 0.5 mm² for bandoliered contacts (250 pieces) FC 1 FC 2 FC 3 09 99 000 0247 09 99 000 0119 09 99 000 0120 0.09 - 0.25 mm² 0.14 - 0.56 mm² 0.50 - 1.50 mm² BC / har-bus® 64 solid wire 09 99 000 0627 0.13 mm² (solid wire) Wire gauge Crimping tool for individual contacts FC 1, FC 2 and FC 3 (Service tool) 09 99 000 0191 Wire gauge FC 1: 0.14 - 0.25 mm² FC 2: 0.25 - 0.56 mm² FC 3: 0.75 - 1.50 mm² Locator is supplied with the tool. Insertion tool for contacts BC / har-bus® 64 09 99 000 0100 for contacts FC 1, FC 2 and FC 3 09 99 000 0088 Removal tool 30 . 16 for contacts BC / har-bus® 64 09 99 000 0101 for contacts FC 1, FC 2 and FC 3 09 99 000 0087 Insertion and removal see chapter 02