BJL160160-030W-E002

Product Specification Product Name: 60301 Product Code : BJL160160-030W-E002 Customer Approved by Customer Approved E-mail: Date: 1 / 26 CONTENT REVISION RECORD........................................................................................................................ 1 1 Overview ....................................................................................................................................... 1 2 Features ......................................................................................................................................... 1 3 Mechanical Data ........................................................................................................................... 1 4 Mechanical Drawing ..................................................................................................................... 2 5 Module Interface ........................................................................................................................... 3 6 Function Block Diagram ............................................................................................................... 4 7 Absolute Maximum Ratings ......................................................................................................... 4 8 Electrical Characteristics............................................................................................................... 5 9 Optical Characteristics .................................................................................................................. 5 10 Timing Characteristics ............................................................................................................... 8 11 Standard Specification for Reliability ..................................................................................... 13 11.1 Standard Specification for Reliability of LCD Module ................................................... 13 12 13 14 11.2 Testing Conditions and Inspection Criteria ...................................................................... 13 Specification of Quality Assurance ......................................................................................... 15 12.1 Quality Test ................................................................................................................... 15 12.2 Delivery Test ................................................................................................................. 15 12.3 Non-conforming Analysis & Deal With Manners......................................................... 15 12.4 Agreement items ........................................................................................................... 15 12.5 Standard of The Product Appearance Test .................................................................... 15 12.5.1Basic principle.................................................................................................................. 16 12.6 Inspection Specification ................................................................................................ 17 General Precautions ................................................................................................................. 23 13.1 Safety ............................................................................................................................ 23 13.2 Handling ........................................................................................................................ 23 13.3 Static Electricity ............................................................................................................ 23 13.4 Storage .......................................................................................................................... 23 13.5 Cleaning ........................................................................................................................ 23 Packing Method ....................................................................................................................... 23 E-mail: 2 / 26 REVISION RECORD REV. V1 REVISION DESCRIPTION Initial release E-mail: REV. DATE REMARK 20230307 1 / 26 1 Overview 60301 is a monochrome LCD display module with 160×160 dot matrix. 2 3 Features  Dot Matrix:160×160  Driver IC: ST75161  Interface: 4- SPI  Wide range of operating temperature: -40℃ to 80℃ Mechanical Data NO. ITEM SPECIFICATION UNIT 1 LCD type FSTN POSITIVE - 2 Viewing direction 6:00 O’Clock 3 Module size (H*W*T) 83.8*76.5*9.2(MAX) mm 4 Active area (H*W) 54.38*54.38 mm 5 Driver IC ST75161 - 6 Number of dots 160*160 - 7 Backlight type 8 LEDS 8 Interface type Serial interface - 9 Operating temperature -40 ~ 70 ℃ 10 Storage temperature -40 ~ 80 ℃ E-mail: 1 / 26 Mechanical Drawing 76.5±0.5(PCB) 54.38A/A 8.51 52.8±0.3 10.25 5 3.5 7.2 76.8±0.3 10.7 73.8±0.3 60±0.3(VA) 67±0.3（BEZAL） 13.51 高 胶 温 带 1 18 *31.00±1.0 W=0.50 1.00 P1*(18-1)=17.00 4.00±1.0 *9.20 MAX 5.10±0.5 1.60±0.1 PCB 7.00±1.0 *19.00±0.2 83.8±0.5（PCB） 32.81 54.38A/A 15.77 Specification 1.VIEWING DIRECTION: 6:00 2.Driver:ST75161 3.Interface:8080、SPI 4.General Tolerance:±0.2mm 5.Operate temp:-40℃~70℃ Storage temp:-40℃~80℃ 6.DRIVE METHOD: 1/160 DUTY 1/11 BIAS 7.RoHS Compliant 18 1 4 * ? 3. 2 4*? 2.5 *31.00±1.0 1 18 1.5 BOJU柏钜 高 77.8 带 胶 温 高 带 胶 温 3 60301 Name Unit mm Date Sheet 1/1 2022.11.29 0.34 0.32 8.5 55.9 3.7 5.7 65.5±0.3 60±0.3(VA) Pin Assignment SYMBOL NO. 1 VSS 2 A0 3 VDD(/WR) 4 VDD(/RD) 5 XCS /REST 6 7 VDD3.3V SCL(D0) 8 SDA(D1) 9 SDA(D2) 10 SDA(D3) 11 VDD(D4) 12 VDD(D5) 13 VDD(D6) 14 15 VDD(D7) BLK（0V） 16 17 NC 18 BLA(3.3V) Version V1 2 / 26 E-mail: 0.34 0.32 22.80±0.5 2.45 72.5±0.3(BEZAL) 2*? 4 *19.00±0.2 5 Module Interface PIN NO. 1 2 3 4 5 PIN NAME VSS A0 VDD(/WR) VDD(/RD) CS# 6 RES # 7 8 9 10 11 12 13 14 15 16 17 18 VDD SCL(D0) SDA(D1) SDA(D2) SDA(D3) VDD(D4) VDD(D5) VDD(D6) VDD(D7) BLK(0V) NC BLA(3.3V) E-mail: DESCRIPTION This is a ground pin. Data/Command control pin. H: Data; L : Command. Power supply,3.3V.. Power supply,3.3V.. Chip Select, active low. This pin is reset signal input. When the pin is LOW, initialization of the chip is executed. Keep this pin HIGH during normal operation. Power supply,3.3V. Serial clock input Serial data Input/Output Serial data Input/Output Serial data Input/Output Power supply,3.3V. Power supply,3.3V. Power supply,3.3V. Power supply,3.3V. Backlight cathode Floating Backlight anode 3 / 26 6 Function Block Diagram 7 Absolute Maximum Ratings Parameter SYMBOL MIN UNIT Operating temperature TOP -40 to +70 ℃ Storage Temperature TST -40 to +80 ℃ Supply Voltage For Logic VDD-VSS -0.3~3.5 V Supply Voltage For LCD Vop 0~16.5 V E-mail: 4 / 26 8 Electrical Characteristics Backlight Characteristics 9 Optical Characteristics Note 1: Definition of Viewing Angle θxand θy: E-mail: 5 / 26 E-mail: 6 / 26 E-mail: 7 / 26 10 Timing Characteristics E-mail: 8 / 26 INSTRUCTION DESCRIPTION E-mail: 9 / 26 E-mail: 10 / 26 E-mail: 11 / 26 E-mail: 12 / 26 11 Standard Specification for Reliability 11.1 Standard Specification for Reliability of LCD Module *Sample size for each test item is 3~5pcs 11.2 Testing Conditions and Inspection Criteria For the final test, the testing sample must be stored at room temperature for 24 hours. After the tests listed in Table 11.2, standard specifications for reliability will be executed in order to ensure stability. E-mail: 13 / 26 E-mail: 14 / 26 12 Specification of Quality Assurance This standard of Quality Assurance confirms to the quality of LCD module products supplied by BODJOY. 12.1 Quality Test Before delivering, the supplier should conduct the following tests to confirm the quality of products. Electrical-Optical Characteristics: According to the individual specification to test the product. Appearance Characteristics: According to the individual specification to test the product. Reliability Characteristics: According to the definition of reliability on the specification for testing products.. 12.2 Delivery Test Before delivering, the supplier should conduct the delivery test. Test method: According to MIL-STD105E.General Inspection Level Ⅱ take a single Time. The defects classify of AQL as following: Major defect: AQL = 0.65 Minor defect: AQL = 2.5 Total defects: AQL = 2.5 12.3 Non-conforming Analysis & Deal With Manners 12.3.1 Non-conforming Analysis Purchaser should provide the data detail of non-conforming sample and the non-conforming. After receiving the data detail from purchaser, the analysis of non-conforming should be finished within two weeks. If the analysis can’t be finished on time, supplier must notice purchaser 3 days in advance. 12.3.2 Disposition of non-conforming If any product defect be found during assembling, supplier must change the good for every defect after confirmation. Both supplier and customer should analyze the reason and discuss the disposition of non-conforming when the reason of nonconforming is notsure. 12.4 Agreement items Both parties should negotiate together when the following problems happen. There is any problem of standard of quality assurance, and both sides should agree that it must be modified. There is any argument item which does not record in the standard of quality assurance. Any other special problem. 12.5 Standard of The Product Appearance Test 12.5.1 Manner of appearance test The test must be under 20W × 2 or 40W fluorescent light, and the distance of view E-mail: 15 / 26 must be at 30±5cm. When test the model of transmissive product must add the reflective plate. The test direction is base on around 10°of vertical line. Temperature: 25±5℃ Humidity: 60±10%RH Definition of area: 12.5.1Basic principle When the standard can not be described, AQL will be applied. The sample of the lowest acceptable quality level must be negotiated by both supplier and customer when any dispute happened. New item must be added on time when it is necessary. E-mail: 16 / 26 12.6 Inspection Specification E-mail: 17 / 26 E-mail: 18 / 26 E-mail: 19 / 26 E-mail: 20 / 26 E-mail: 21 / 26 E-mail: 22 / 26 13 General Precautions 13.1 Safety Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your skin or clothes, wash it off immediately by using soap and water. 13.2 Handling The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive force on its surface. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid scratch or other damages. To avoid contamination on the display surface, do not touch the module surface with bare hands. Keep a space so that the LCD panels do not touch other components. Put cover board such as acrylic board on the surface of LCD panel to protect panel from damages. Transparent electrodes may be disconnected if you use the LCD panel under environmental conditions where the condensation of dew occurs. Do not leave module in direct sunlight to avoid malfunction of the ICs. 13.3 Static Electricity Be sure to ground module before turning on power or operating module. Do not apply voltage which exceeds the absolute maximum rating value. 13.4 Storage Store the module in a dark room where must keep at 25±10℃ and 65%RH or less. Do not store the module in surroundings containing organic solvent or corrosive gas. Store the module in an anti-electrostatic container or bag. 13.5 Cleaning Do not wipe the polarizer with dry cloth. It might cause scratch. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent damage to the polarizer. 14 Packing Method ----TB E-mail: 23 / 26