MMS-105-02-L-SV-K-TR

F-219 MMS–112–02–F–SH MMS–112–01–L–DH MMS–116–02–L–DV MMS–108–01–L–SV (2.00 mm) .0787" MMS SERIES TIGER CLAW SOCKET STRIP ™ Board Mates: TMMH, TMM, MTMM, MMT, TW, LTMM, ZLTMM, TSH MMS NO. PINS PER ROW 1 ROW OPTION PLATING OPTION 01 Cable Mates: TCMD 02 thru 40 SPECIFICATIONS For complete specifications see www.samtec.com?MMS (2.00) .0787 Insulator Material: Black LCP Contact Material: Phosphor Bronze Plating: Sn or Au over 50 µ" (1.27 µm) Ni Current Rating (MMS/TMM): 3.9 A per pin (2 pins powered) Operating Temp Range: -55 °C to +125 °C with Gold -55 °C to +105 °C with Tin Insertion Depth: DH = (2.13 mm) .084" to (2.79 mm) .110", SH = (2.13 mm) .084" minimum or pass-through Top Entry DV/SV = (2.13 mm) .084" to (4.32 mm) .170" Bottom Entry DV/SV = (4.27 mm) .168" minimum (Plus board) RoHS Compliant: Yes 01 –SV –SH 80 = Single Horizontal –SH –DV = Double Vertical –DH (2.00) .0787 –DV = Polarized Position = Double Horizontal 01 –DH No. of positions x (2.00) .0787 + (0.56) .022 (4.45) .175 –DH –SH MMS (4.70) .185 (2.92) .115 –SV Lead–Free Solderable: Yes SMT Lead Coplanarity: (0.15 mm) .006" max* *(.004" stencil solution may be available; contact IPG@samtec.com) 1 –SV –DV NO. PINS PER ROW For complete scope of recognitions see www.samtec.com/quality 01 FILE NO. E111594 –SH 80 ALSO AVAILABLE • Alignment Pin (–DV only) • Locking clips and Throughhole pass-through options • Other platings –S Row (3.81) .150 x (7.62) .300 02 (2.00) (4.17) .0787 .164 79 (1.22) .048 –P = Single Vertical –SH = Single Horizontal = 10 µ" (0.25 µm) Gold contact, Matte Tin on tail –DV = Double Vertical –DH = Double Horizontal (5.08) .200 x (5.71) .225 –DH No. of positions x (2.00) .0787 + (0.56) .022 –SV –D Row (5.71) .225 x (10.01).394 01 –DV ROW OPTION –L –M (1.39) .055 –SV –SH –“XX” = Polarized Position –K = (5.50 mm) .217" DIA Polyimide Film Pick & Place Pad (–SV & –DV only) (–SV= 3 positions min.) (–DV= 4 positions min.) –M = Metal Pick & Place Pad (4 positions min.) (–DV only) = Plastic Pick & Place Pad (4 pos. min., –SV only) (5 pos. min., –DV only) = Tape & Reel Packaging –DV –DH Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM OTHER OPTION –TR (1.39) .055 (4.50) .177 (3.05) .120 –P (4.70) .185 (1.22) .048 (4.70) .185 –DH –DV = Gold flash on contact, Matte Tin on tail 40 (4.00) .157 (2.00) .079 –F (2.16) .085 –SV (2.92) .115 PLATING OPTION 02 (2.00) .0787 (2.00) .0787 (3.05) .120 –SH 02 thru 40 RECOGNITIONS Note: Some lengths, styles and options are non-standard, non-returnable. –L 02 79 –“XX” = Single Vertical = 10 µ" (0.25 µm) Gold contact, Matte Tin on tail 40 (4.00) .157 PROCESSING (MOQ Required) –SV –F = Gold flash on contact, Matte Tin on tail (2.00) .0787 OTHER OPTION All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.