AES-ARDUINO-CC-G

MicroZed™ Carrier Card Kit for Arduino™ The MicroZed™ Carrier Card Kit for Arduino™ brings both Shield expansion and Peripheral Module expansion (2x6 pin connectors) to the MicroZed System-On-Module. The carrier card is ideal for building quick prototypes that leverage the large number of Arduino-compatible Shields. This low-cost platform facilitates: - Expansion of platform functionality via a wide range of 3rd party Arduino™-compatible “Shields” - Design partitioning to include ultra low-power MCU to offload and control the Apps Processor - Power management and scheduling of the MicroZed board by an optional Microcontroller board - 2x6 Peripheral expansion connectors for MicroZed as well as the optional MCU sub-system KIT INCLUDES FEATURES - MicroUSB Cable - MicroZed™ Carrier Card Kit for Arduino™ - Carrier Card support for MicroZed SOMs - Downloadable Zynq-based Reference Design - Full Arduino-compatible Shield site with connection to MicroZed PL I/O - Partial Arduino-compatible Shield site for connection to optional low-power MCU sub-system TARGET APPLICATIONS - Supports MCU ON/OFF control of MicroZed power - Enables offloading of MicroZed tasks to the low-power MCU - Facilitates low-power sensor hub functionality, autonomous from MicroZed application processor - MicroZed prototyping that leverages the ecosystem of Shield boards for Arduino - MCU power and run control of MicroZed SOM - Adds two 2x6 peripheral module expansion interfaces to MicroZed - Supports interface for PS based SDIO/SPI - Supports interface for PL based I/O - Adds one 2x6 peripheral module expansion interface to the low-power MCU connector USB-UART Interface LP MCU Expansion Site Power via MicroUSB J7 - Supports interface for I2C/UART To purchase this kit, visit www.microzed.org/product/arduino-cc MicroZed SOM MicroZed Shield Expansion Site 2x6 Peripheral Module Connectors BLOCK DIAGRAM VCCIO_EN Micro-USB J7 PSU 5V, 2A DC INPUT +5V 3.3V, 3A dc/dc Reg. 3.3V, 0.5A dc/dc Reg. P3V3_PM P3V3_JM2 Optional Shield P3V3_MZ D3 JP1 JP2, JP3 I/F Select I2CO UARTO (RHS Connectors) JM1, JM2 D4 3V3 Select I2C1 SPI1 PG MODULE P3V3_MZ P3V3_LP / GPIO_LP, INT_LP GPIO INTERRUPTS P3V3_MZ Low-Power MCU Board Connectors JM1, JM2 VCCIO_34 VCCIO_35 VCCIO_13 P3V3_MZ 8 GPIO_PL / VCCIO_EN (LHS bridging connectors. Not on the Carrier Card) JM3, JM4 SDIO_MZ SPI0 GPIO_MZ INT_MZ_MCU PL-PMOD Connector J3 P3V3_MZ POWER_EN 12C1/UART1* LP-PMOD Connector J1 SPI_MZ MICROZED MicroHeaders JX2, JX1 P3V3_MZ SPI_MZ I2C_MZ +5V UART_MZ T0_MZ, T1_MZ INTO_MZ, INT1_MZ * Additional expansion possible by stacking of Shields onto optional Low-Power MCU board. PS-PMOD Connector J2 MicroZed’s Arduino Shield Connectors JA3, JA2 JA4, JA1 GPIO_MZ FEATURED MANUFACTURERS PARTS Part Number Description AES-ARDUINO-CC-G MicroZed™ Carrier Card Kit for Arduino™ RELATED PARTS Part Number Description AES-Z7MB-7Z010-G Avnet MicroZed™ Evaluation Kit FRDM-KL46Z Freedom Development platform for Kinetis L series KL46 CENB1010A0500B04 AC/DC Power Supply 5V,2A Countries Available for Purchase: Americas, EMEA, Asia, Japan CONTACT INFORMATION North America 2211 S 47th Street Phoenix, Arizona 85034 United States of America eval.kits@avnet.com 1-800-585-1602 Europe Gruber Str. 60c 85586 Poing Germany marketing@silica.com +49-8121-77702 Europe (EBV) Im Technologiepark 2-8 85586 Poing Germany http://ebv.com/contact Japan Yebisu Garden Place Tower, 23F 4-20-3 Ebisu, Shibuya-ku Tokyo 150-6023 Japan eval-kits-jp@avnet.com +81-(0)3-5792-8210 Asia 151 Lorong Chuan, #06-03 New Tech Park Singapore 556741 ASIA-EM-ADS@avnet.com +65-6580-6000 Copyright © 2017 Avnet, Inc. AVNET, "Reach Further," and the AV logo are registered trademarks of Avnet, Inc. All other brands are the property of their respective owners. LIT# 5060-PB-ARDUINO-CC-V1