E40P100KC

E40P100KC P-Channel 100V MOSFET TO252 E40P100KC VDS (V) RDS(on),max (mΩ) ID (A) -100 45@ VGS = -10V -40 Features  Trench MOS technology  Low Rds(on),Low Qg  Excellent Gate Charge x Rds(ON) Product (FOM) Applications  Fast switching Package and ordering information Ordering code E40P100KC Package Device code TO252 --- Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter Symbol Maximum Units Drain-Source Voltage VDS -100 V Gate-Source Voltage VGS ±20 V TC=25°C ID -40 A TC=100°C ID -19 A Drain Current – Pulsed IDM -120 A Maximum Power Dissipation PD 102 W Single pulse avalanche energy EAS 230 mJ TJ ,TSTG -55 To 150 ℃ Continuous drain current Junction and Storage Temperature Range Thermal Characteristics Parameter Symbol Typ Max Unit Thermal Resistance junction-case RθJc 1.2 ℃ /W Thermal Resistance junction-to-Ambient RθJA 62 ℃ /W Page 1 V1.0 E40P100KC Electrical Characteristics(TJ=25 ℃ unless otherwise noted) Symbol Parameter Condition Min Typ Max Unit STATICPARAME TERS BVDSS Drain-Source Breakdown Voltage IDSS Zero Gate Voltage Drain Current VDS=-80V,VGS=0V -1 μA IGSS Gate-Body Leakage Current VGS=±20V,VDS=0V -100 nA Gate Threshold Voltage VDS=VGS,ID=-250μ A -1.8 -2.5 V Drain-Source On-State VGS=-10V, I D =-15A 31 45 mΩ Resistance VGS=-4.5V,I D =-10A 41 50 mΩ Forward Transconductance VDS =-10V, I D =-5A 22 S 2300 pF 220 pF 50 pF 58 nS 24 nS 215 nS VGS(th) RDS(ON) gfs VGS=0V,ID=-250μA -100 -1.2 V DYNAMICPARAMET ERS Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS=-25V,VGS=0V, F=1.0MHz SWITCHINGPARAMETER S td(on) Turn-on Delay Time tr Turn-on Rise Time td(off) Turn-Off Delay Time VDD=-50V,ID=-5A, VGS=-10V, RG=25Ω tf Turn-Off Fall Time 94 nS Qg Total Gate Charge 98 nC Qgs Gate-Source Charge 16 nC Qgd Gate-Drain Charge 13.5 nC VSD Diode Forward Voltage VDS=-50V,ID=-10A, VGS=0到-10V VGS=0V,ISD=-1A Page 2 -0.7 -1.2 V V1.0 E40P100KC Electrical Characteristics Diagrams V1.0 3 / 5 E40P100KC Package Outline Dimensions V1.0 4 / 5 E40P100KC Legal Disclaimer The information given in this document shall be for illustrative purposes only and shall in no event be regarded as a guarantee of conditions or characteristics. Existar Technologies reserves the right to change any information herein. With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Existar Technologies or its affiliates hereby make no representation or warranty of any kind, expressed or implied, as to any information provided hereunder, including without limitation as to the accuracy, completeness or non-infringement of intellectual property rights of any third party, and they assume no liability for the consequences of use of such information. In addition, any information given in this document is subject to customer’s compliance with its obligations stated herein and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Existar Technologies in customer’s applications. The information contained herein is exclusively intended for technically trained staff. No license is granted by implication under any patent right, copyright, mask work right, or other intellectual property right. It is customer’s sole responsibility to evaluate the suitability of the product for the intended application and the completeness of the product information given herein with respect to such application. In no event shall Existar Technologies or its affiliates be liable to any party for any direct, indirect, special, punitive, incidental or consequential damages of any nature whatsoever, including but not limited to loss of profits and loss of goodwill, whether or not such damages are based on tort or negligence, warranty, breach of contract or any other legal theory. V1.0 5 / 5