62SG11-M0-060C

Optical Encoders SERIES 62SG Compact / Cost Effective FEATURES • Just 0.3-inch behind panel depth • Over 1 million rotational cycles • 2-bit gray code output • Quadrature coding • Available in 16, 24 and 32 detent positions • Optional integrated pushbutton • Light pipe technology • Cost competitive with mechanical encoders at higher volumes APPLICATIONS • Automotive - audio systems - navigation systems • Medical - patient monitoring systems • Test & Measurement - analyzers - oscilloscopes • Audio & Video - consumer electronics - professional editing equipment Optical and Mechanical Encoders DIMENSIONS in inches (and millimeters) .050” Cable Connector .050” Pin Header Connector NEW P/N JST SHROUDED HEADER SM08B-GHS-TB MATING CONNECTOR P/N JST HOUSING GHR-08V-S Unless otherwise specified, standard tolerances are: Linear ± .025 Diameter ± .010 Angle ± 2.0 0 Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical Encoders WAVEFORM AND TRUTH TABLE SPECIFICATIONS Environmental Specifications Rotary Electrical and Mechanical Specifications Operating Voltage: 5.00 ± 0.25 Vdc Supply Current: 30 mA maximum Logic Output Characteristics: Logic high: no less than 3.0 Vdc Logic low: no greater than 1.0 Vdc Output: Open Collector Phototransistor Optical Rise Time: 30ms maximum Optical Fall Time: 30ms maximum AVERAGE ROTATIONAL TORQUE SPECIFICATIONS LOW MEDIUM HIGH 16 POSITION 24 POSITION 32 POSITION ±0.50 IN-OZ 1.40 1.25 0.95 ±1.40 IN-OZ 2.35 1.95 1.40 ±1.60 IN-OZ 3.40 2.95 2.15 Mechanical Life: 1,000,000 cycles of operation. 1 cycle is a rotation through all positions and a full return Mounting Torque: 15in-lbs. maximum Shaft Pushout Force: 45 lbs. minimum Terminal Strength: 15 lbs. cable pull out force minimum Solderability: 95% free of pin holes & voids Pushbutton Electrical and Mechanical Specifications Rating: 30 mA @ 5 Vdc Contact Resistance: