VL-EPME-30ECP

BIOS Reference Manual Bengal DOC. REV. 14 MAR 2016 (VL-EPMe-30) Intel® Atom™-based SBC with Dual Ethernet, Video, USB, SATA, Serial I/O, Digital I/O, Trusted Platform Module Security, Counter/Timers, Mini PCIe, mSATA, SPX, and PCIe/104 OneBank™ Interface WWW.VERSALOGIC.COM 12100 SW Tualatin Road Tualatin, OR 97062-7341 (503) 747-2261 Fax (971) 224-4708 Copyright © 2016 VersaLogic Corp. All rights reserved. Notice: Although every effort has been made to ensure this document is error-free, VersaLogic makes no representations or warranties with respect to this product and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. VersaLogic reserves the right to revise this product and associated documentation at any time without obligation to notify anyone of such changes. † Other names and brands may be claimed as the property of others. Bengal (VL-EPMe-30) BIOS Reference Manual ii Product Release Notes This document reflects the content of the BIOS Setup program for the EPMe-30 Bengal Board. Board Revision BIOS Version BIOS ID String Comments Rev 2.00 1.01 Bengal_3.1.0.334.r1.101 First release of document Rev 2.02A 1.02 Bengal_3.1.0.334.r1.102 Changed default setting of PCIe 1 speed from Auto to Gen 1 Rev 3.00 1.04 Bengal_3.1.0.547.r1.104 Refer to the table below Table 1: Changes from BIOS 334.r1.102 to BIOS 547.r1.104 Screen/Menu Change Ref. Main System Information New BIOS ID string Page 5 Boot Features Console Redirection Terminal Type Default changed from ANSI to VT100+ Page 15 Main Boot Features Load OPROM Disabled option replaced with All Page 23 Advanced OS Selection Default changed from Windows to Linux Page 28 Advanced CPU Power Management Max C State Option C4 removed (default setting C7 not changed) Page 54 Advanced Graphics/Uncore Configuration Added Graphics/ to submenu title Page 55 Advanced Graphics/Uncore Configuration DVMT Total Gfx Mem New screen/option added to this BIOS Page 64 Advanced Graphics/Uncore Configuration IGD Boot Type Option eDP was removed Page 68 Advanced Graphics/Uncore Configuration GMCH BLC Control New screen/option added to this BIOS Page 70 Advanced USB Configuration USB Port #3 New screen/option added to this BIOS Page 86 Advanced Audio Configuration Audio Controller Default setting changed to Disable Page 87 Advanced LPSS & SCC Configuration MPI HSI Support Removed from this BIOS Advanced LPSS & SCC Configuration LPSS DMA #2 Support Default changed to Enable Page 94 Advanced LPSS & SCC Configuration LPSS I2C #1 Support Default changed to Enable Page 95 Advanced LPSS & SCC Configuration LPSS HSUART #1 Removed from this BIOS N/A Advanced LPSS & SCC Configuration LPSS HSUART #2 Removed from this BIOS N/A N/A Support Page The Bengal Support Page contains additional information and resources for this product including:    Operating system information and software drivers Data sheets and manufacturers’ links for chips used in this product BIOS information and upgrades VersaTech KnowledgeBase The VersaTech KnowledgeBase contains useful technical information about VersaLogic products, along with product advisories. Customer Support If you are unable to solve a problem after reading this manual, visiting the product support page, or searching the KnowledgeBase, contact VersaLogic Technical Support at (503) 747-2261. VersaLogic support engineers are also available via e-mail at Support@VersaLogic.com. Bengal (VL-EPMe-30) BIOS Reference Manual iii Contents Overview ........................................................................................................................1 Main Menu......................................................................................................................2 Main  System Date .......................................................................................................... 3 Main  System Time ......................................................................................................... 4 Main  System Information .............................................................................................. 5 Main  Boot Features........................................................................................................ 6 Main  Boot Features  NumLock..................................................................... 7 Main  Boot Features  Timeout ....................................................................... 8 Main  Boot Features  CSM Support .............................................................. 9 Main  Boot Features  Quick Boot ................................................................ 10 Main  Boot Features  Diagnostic Splash Screen .......................................... 11 Main  Boot Features  Diagnostic Summary Screen ..................................... 12 Main  Boot Features  BIOS Level USB ....................................................... 13 Main  Boot Features  Console Redirection .................................................. 14 Main  Boot Features  Allow Hotkey in S4 Resume ..................................... 19 Main  Boot Features  UEFI Boot ................................................................. 20 Main  Boot Features  Legacy Boot .............................................................. 21 Main  Boot Features  Boot In Legacy Video Mode ..................................... 22 Main  Boot Features  Load OPROM ........................................................... 23 Main  Error Manager .................................................................................................... 24 Main  Error Manager  View Error Manager Log......................................... 25 Main  Error Manager  Clear Error Manager Log......................................... 26 Advanced Menu ...........................................................................................................27 Advanced  OS Selection ............................................................................................... 28 Advanced  VersaLogic Features ................................................................................... 29 Advanced  VersaLogic Features  Mini Card Mode ..................................... 30 Advanced  VersaLogic Features  UART1 ................................................... 31 Advanced  VersaLogic Features  UART2 ................................................... 35 Advanced  CPU Configuration ..................................................................................... 39 Advanced  CPU Configuration  Execute Disable Bit .................................. 40 Advanced  CPU Configuration  AES-NI ..................................................... 41 Advanced  CPU Configuration  Limit CPUID Maximum ........................... 42 Advanced  CPU Configuration  Bi-directional PROCHOT# ...................... 43 Advanced  CPU Configuration  VTX-2....................................................... 44 Advanced  CPU Configuration  TM1 .......................................................... 45 Advanced  CPU Configuration  DTS........................................................... 46 Advanced  CPU Configuration  Intel Hyper-Threading Technology .......... 47 Advanced  CPU Power Management ........................................................................... 48 Advanced  CPU Power Management  Intel SpeedStep ............................... 49 Advanced  CPU Power Management  Intel Turbo Boost Technology ........ 51 Advanced  CPU Power Management  C-States ........................................... 52 Advanced  CPU Power Management  Max C State .................................... 54 Bengal (VL-EPMe-30) BIOS Reference Manual iv Contents Advanced  Graphics/Uncore Configuration ................................................................. 55 Advanced  Graphics/Uncore Configuration  GOP Driver ........................... 56 Advanced  Graphics/Uncore Configuration  Integrated Graphics Device .. 57 Advanced  Graphics/Uncore Configuration  Primary Display .................... 58 Advanced  Graphics/Uncore Configuration  RC6 (Render Standby) .......... 59 Advanced  Graphics/Uncore Configuration  PAVC .................................... 60 Advanced  Graphics/Uncore Configuration  GTT Size ............................... 61 Advanced  Graphics/Uncore Configuration  Aperture Size ........................ 62 Advanced  Graphics/Uncore Configuration  DVMT Pre-Allocated ........... 63 Advanced  Graphics/Uncore Configuration  DVMT Total Gfx Mem ........ 64 Advanced  Graphics/Uncore Configuration  IGD Turbo............................. 65 Advanced  Graphics/Uncore Configuration  BIA........................................ 66 Advanced  Graphics/Uncore Configuration  LCD Panel Type ................... 67 Advanced  Graphics/Uncore Configuration  IGD Boot Type ..................... 68 Advanced  Graphics/Uncore Configuration  Panel Scaling......................... 69 Advanced  Graphics/Uncore Configuration  GMCH BLC Control ............ 70 Advanced  South Cluster Configuration ....................................................................... 71 Advanced  PCI Express Configuration  PCIe 0 Speed ................................ 72 Advanced  PCI Express Configuration  PCIe 1 Speed ................................ 73 Advanced  PCI Express Configuration  PCIe 2 Speed ................................ 74 Advanced  PCI Express Configuration  PCIe 3 Speed ................................ 75 Advanced  PCI Express Configuration  PCI Express Root Port 1 ............... 76 Advanced  PCI Express Configuration  PCI Express Root Port 2 ............... 77 Advanced  PCI Express Configuration  PCI Express Root Port 3 ............... 78 Advanced  PCI Express Configuration  PCI Express Root Port 4 ............... 79 Advanced  USB Configuration  XHCI Link Power Management ............... 80 Advanced  USB Configuration  EHCI Controller ....................................... 81 Advanced  USB Configuration  USB Per-Port Control ............................... 82 Advanced  USB Configuration  USB Port #0 .............................................. 83 Advanced  USB Configuration  USB Port #1 .............................................. 84 Advanced  USB Configuration  USB Port #2 .............................................. 85 Advanced  USB Configuration  USB Port #3 .............................................. 86 Advanced  Audio Configuration  Audio Controller .................................... 87 Advanced  Audio Configuration  Azalia VCi Enable.................................. 88 Advanced  Audio Configuration  Azalia HDMI CODEC ........................... 89 Advanced  SATA Drives  Chipset SATA.................................................... 90 Advanced  SATA Drives  Chipset SATA Mode ......................................... 91 Advanced  LPSS & SCC Configuration  LPSS Devices Mode ................... 92 Advanced  LPSS & SCC Configuration  LPSS DMA #1 Support .............. 93 Advanced  LPSS & SCC Configuration  LPSS DMA #2 Support .............. 94 Advanced  LPSS & SCC Configuration  LPSS I2C #1 Support ................. 95 Advanced  LPSS & SCC Configuration  LPSS PWM #1 Support .............. 96 Advanced  LPSS & SCC Configuration  LPSS PWM #2 Support .............. 97 Advanced  Miscellaneous Configuration  High Precision Timer ................ 98 Advanced  Miscellaneous Configuration  Boot Time with HPET Timer ... 99 Advanced  Miscellaneous Configuration  State After G3 ......................... 100 Advanced  Miscellaneous Configuration  SoC Debug UART .................. 101 Advanced  Miscellaneous Configuration  SMM Lock .............................. 102 Bengal (VL-EPMe-30) BIOS Reference Manual v Contents Advanced  Miscellaneous Configuration  PCI MMIO Size ...................... 103 Advanced  Security ..................................................................................................... 104 Advanced  Security Configuration  TXE ................................................... 105 Advanced  Security Configuration  TXE HMRFPO ................................. 106 Advanced  Security Configuration  TXE Firmware Update...................... 107 Advanced  Security Configuration  TXE EOP Message ........................... 108 Advanced  Security Configuration  TXE Unconfiguration Perform ......... 109 Advanced  Thermal ..................................................................................................... 110 Advanced  Thermal  Critical Trip Point .................................................... 111 Advanced  Thermal  Passive Trip Point .................................................... 112 Advanced  Thermal  Active Trip Point ...................................................... 113 Advanced  Thermal  Start Fan With Cold CPU......................................... 114 Advanced  SMBIOS Event Log .................................................................................. 115 Advanced  SMBIOS Event Log  Event Log .............................................. 116 Advanced  SMBIOS Event Log  Mark SMBIOS Events As Read ............ 117 Advanced  SMBIOS Event Log  Clear SMBIOS Events .......................... 118 Security Menu ............................................................................................................119 Security  Set Supervisor Password ............................................................................. 120 Security  Supervisor Hint String ................................................................................. 121 Security  Set User Password ....................................................................................... 122 Security  User Hint String........................................................................................... 123 Security  Min. Password Length ................................................................................. 124 Security  TPM Support ............................................................................................... 125 Security  TPM Configuration ..................................................................................... 126 Security  TPM Configuration  Current TPM State .................................... 127 Security  TPM Configuration  TPM Action .............................................. 128 Security  TPM Configuration  Omit Boot Measurements ......................... 129 Boot Menu..................................................................................................................130 Exit Menu ...................................................................................................................132 Bengal (VL-EPMe-30) BIOS Reference Manual vi Overview 1 The BIOS Setup utility is stored in the Serial Peripheral Interface (SPI) Flash device. The initial production BIOS ID string is Bengal_3.1.0.547.r1.104. The BIOS Setup utility can be used to view and change the BIOS settings for the Bengal board. To access the BIOS Setup utility, press during the early boot cycle. The top-level menu bar is shown below. Main Advanced Phoenix SecureCore Technology Setup Security Boot Exit /----------------------------------------------------------------------------\ Table 2 lists the BIOS Setup utility top-level menu bar features. Table 2: Top-level Menu Bar Features Menu Main Advanced Security Function Displays processor and memory configuration Configures advanced features available through the chipset Sets passwords and security features Boot Selects boot device options Exit Saves or discards changes to Setup utility options Table 3 lists the function keys available for menu screens. Table 3. BIOS Setup Utility Function Keys Menu Function Help or or Selects an item (Moves the cursor up or down) Changes values Loads setup default values Exits the menu or Selects a different menu screen (Moves the cursor left or right) Executes a command or selects a sub-menu Saves the current values and exits the BIOS Setup utility Bengal (VL-EPMe-30) BIOS Reference Manual 1 Main Menu 2 The Main menu enables you to:    Set system date and time Set boot features View and clear the error log Top level view of Main menu screen. Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | System Date [01/14/2016] |------------------------| | System Time [11:31:50] | | | | View or set system | | > System Information | date. | | > Boot Features | | | > Error Manager | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Bengal (VL-EPMe-30) BIOS Reference Manual 2 Main Menu Main  System Date Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | System Date [01/14/2016] |------------------------| | System Time [11:31:50] | | | | View or set system | | > System Information | date. | | > Boot Features | | | > Error Manager | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Use the and keys to switch between the System Date and System Time fields. Use the and keys to set the month, day, and year. Use the or key to move from month  day  year. Bengal (VL-EPMe-30) BIOS Reference Manual 3 Main Menu Main  System Time Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | System Date [01/14/2016] |------------------------| | System Time [11:32:50] | | | | View or set system | | > System Information | time. | | > Boot Features | | | > Error Manager | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Use the and keys to switch between the System Date and System Time fields. Use the and keys to set the hours, minutes, and seconds. Use the or key to move from hours  minutes  seconds. Bengal (VL-EPMe-30) BIOS Reference Manual 4 Main Menu Main  System Information Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | System Date [01/14/2016] |------------------------| | System Time [11:38:50] | | | | Display System | | > System Information | Information. | | > Boot Features | | | > Error Manager | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit This screen is read-only; there are no user-configurable options. Example view of System Information screen: Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /------------------------------------------------------------------------------\ | System Information | |------------------------------------------------------------------------------| | | | BIOS Version Bengal_3.1.0.547.r1.104 X64 | | Build Time 02/04/2016 | | Processor Type Intel(R) Atom(TM) CPU E3845 @ 1.91GHz | | Processor Speed 1.924 GHz | | System Memory Speed 1333 MHz | | L2 Cache RAM 2048 KB | | Total Memory 4096 MB | | [1] 4096 MB (DDR3- 1333) @ DIMM0 | | [2] 0 MB | | | | | | | | | | | | | | | \------------------------------------------------------------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Bengal (VL-EPMe-30) BIOS Reference Manual 5 Main Menu Main  Boot Features Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| Selects Power-on | | Timeout [ 2] *| state for NumLock. | | CSM Support [Yes] *| | | Quick Boot [Disabled] *| | | Diagnostic Splash Screen [Disabled] *| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Disabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Bengal (VL-EPMe-30) BIOS Reference Manual 6 Main Menu Main  Boot Features  NumLock Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| Selects Power-on | | Timeout [ 2] *| state for NumLock. | | CSM Support [Yes] *| | | Quick Boot [Disabled] *| | | Diagnostic Splash Screen [Disabled] *| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Disabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options On (default) Enable keyboard NumLock function at power-on Off Disable keyboard NumLock function at power-on Bengal (VL-EPMe-30) BIOS Reference Manual 7 Main Menu Main  Boot Features  Timeout Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| Number of seconds | | Timeout [ 2] *| that P.O.S.T will | | CSM Support [Yes] *| wait for the user | | Quick Boot [Disabled] *| input before booting. | | Diagnostic Splash Screen [Disabled] *| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Disabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options 2 (default) Two-second delay 0-99 Acceptable range Bengal (VL-EPMe-30) BIOS Reference Manual 8 Main Menu Main  Boot Features  CSM Support Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| The Compatibility | | Timeout [ 2] *| Support Module | | CSM Support [Yes] *| supports legacy | | Quick Boot [Disabled] *| (non-UEFI) OSes and | | Diagnostic Splash Screen [Disabled] *| provides legacy BIOS | | Diagnostic Summary Screen [Disabled] *| services, such as | | BIOS Level USB [Enabled] *| software interrupt | | Console Redirection [Disabled] *| Int10/Int13. | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options No Disable Compatibility Support Module (CSM) Yes (default) Enable Compatibility Support Module (CSM) Bengal (VL-EPMe-30) BIOS Reference Manual 9 Main Menu Main  Boot Features  Quick Boot Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| Enable/Disable quick | | Timeout [ 2] *| boot. | | CSM Support [Yes] *| | | Quick Boot [Disabled] *| | | Diagnostic Splash Screen [Disabled] *| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Disabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled (default) Disable Quick Boot Enabled Enable Quick Boot Bengal (VL-EPMe-30) BIOS Reference Manual 10 Main Menu Main  Boot Features  Diagnostic Splash Screen Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| If you select | | Timeout [ 2] *| 'Enabled' the | | CSM Support [Yes] *| diagnostic splash | | Quick Boot [Disabled] *| screen always | | Diagnostic Splash Screen [Enabled] *| displays during boot. | | Diagnostic Summary Screen [Disabled] *| If you select | | BIOS Level USB [Enabled] *| 'Disabled' the | | Console Redirection [Disabled] *| diagnostic splash | | Allow Hotkey in S4 resume [Enabled] +| screen does not | | UEFI Boot [Enabled] +| display unless you | | Legacy Boot [Enabled] v| press HOTKEY during | | Boot in Legacy Video Mode [Disabled] *| boot. | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Disabled (default) Diagnostic splash screen does not display unless you press HOTKEY during boot Enabled Diagnostic splash screen always displays during boot Options Bengal (VL-EPMe-30) BIOS Reference Manual 11 Main Menu Main  Boot Features  Diagnostic Summary Screen Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| Display the | | Timeout [ 2] *| Diagnostic summary | | CSM Support [Yes] *| screen during boot. | | Quick Boot [Disabled] *| | | Diagnostic Splash Screen [Enabled] *| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Disabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled (default) Diagnostic summary screen does not display during boot Enabled Diagnostic summary screen displays during boot Bengal (VL-EPMe-30) BIOS Reference Manual 12 Main Menu Main  Boot Features  BIOS Level USB Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| Enable/Disable all | | Timeout [ 2] *| BIOS support for USB | | CSM Support [Yes] *| in order to reduce | | Quick Boot [Disabled] *| boot time. Note that | | Diagnostic Splash Screen [Enabled] *| this will prevent | | Diagnostic Summary Screen [Disabled] *| using a USB keyboard | | BIOS Level USB [Enabled] *| in setup or a USB | | Console Redirection [Disabled] *| biometric scanner | | Allow Hotkey in S4 resume [Enabled] +| such as a finger | | UEFI Boot [Enabled] +| print reader to | | Legacy Boot [Enabled] v| control access to | | Boot in Legacy Video Mode [Disabled] *| setup, but does not | | Load OPROM [On Demand] v| prevent the operating | | +| system from | | v| supporting such | | | hardware. | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled Disables USB support within BIOS Enabled (default) Enables USB support within BIOS Bengal (VL-EPMe-30) BIOS Reference Manual 13 Main Menu Main  Boot Features  Console Redirection Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| Enable/Disable | | Timeout [ 2] *| Universal Console | | CSM Support [Yes] *| Redirection. | | Quick Boot [Disabled] *| | | Diagnostic Splash Screen [Enabled] *| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Disabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled (default) Disables Universal Console Redirection (UCR) Enabled Enables Universal Console Redirection (UCR). When enabled, four sub-menus appear for setting console redirection parameters. Bengal (VL-EPMe-30) BIOS Reference Manual 14 Main Menu Main  Boot Features  Console Redirection Terminal Type Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| Set terminal type of | | Timeout [ 2] *| UCR. | | CSM Support [Yes] *| | | Quick Boot [Disabled] *| In VT100+ mode, send | | Diagnostic Splash Screen [Enabled] *| Fx keys as Esc,x | | Diagnostic Summary Screen [Disabled] *| sequence | | BIOS Level USB [Enabled] *| | | Console Redirection [Enabled] *| F1 = Esc,1 | | Terminal Type [VT100+] *| F2 = Esc,2 | | Baudrate [115200] *| | | Flow Control [None] *| | | Continue C.R. after POST [Enabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options ANSI Sets terminal type to ANSI VT100 Sets terminal type to VT100 VT100+ (default) Sets terminal type to VT100+ UTF8 Sets terminal type to UTF8 Bengal (VL-EPMe-30) BIOS Reference Manual 15 Main Menu Main  Boot Features  Console Redirection Baudrate Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | CSM Support [Yes] ^| Set baudrate of UCR. | | Quick Boot [Disabled] +| | | Diagnostic Splash Screen [Enabled] +| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Enabled] *| | | Terminal Type [VT100+] *| | | Baudrate [115200] *| | | Flow Control [None] *| | | Continue C.R. after POST [Enabled] *| | | Allow Hotkey in S4 resume [Enabled] *| | | UEFI Boot [Enabled] *| | | Legacy Boot [Enabled] *| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options 9600 Sets baudrate to 9600 19200 Sets baudrate to 19200 38400 Sets baudrate to 38400 57600 Sets baudrate to 57600 115200 (default) Sets baudrate to 115200 Bengal (VL-EPMe-30) BIOS Reference Manual 16 Main Menu Main  Boot Features  Console Redirection Flow Control Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | NumLock: [On] ^| Set flow control | | Timeout [ 2] *| method for UCR. | | CSM Support [Yes] *| | | Quick Boot [Disabled] *| [None] - No flow | | Diagnostic Splash Screen [Enabled] *| control. | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| [XON/XOFF] | | Console Redirection [Enabled] *| Software flow control. | | Terminal Type [VT100+] *| | | Baudrate [115200] *| | | Flow Control [None] *| | | Continue C.R. after POST [Enabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options None (default) No flow control [XON/XOFF] Software flow control Bengal (VL-EPMe-30) BIOS Reference Manual 17 Main Menu Main  Boot Features  Console Redirection Continue C.R. after POST Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | NumLock: [On] ^| Enables Console | | Timeout [ 2] *| Redirection after OS | | CSM Support [Yes] *| has loaded. | | Quick Boot [Disabled] *| | | Diagnostic Splash Screen [Enabled] *| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Enabled] *| | | Terminal Type [VT100+] *| | | Baudrate [115200] *| | | Flow Control [None] *| | | Continue C.R. after POST [Enabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled Disables console redirection after the operating system has loaded Enabled (default) Enables console redirection after the operating system has loaded Bengal (VL-EPMe-30) BIOS Reference Manual 18 Main Menu Main  Boot Features  Allow Hotkey in S4 Resume Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | NumLock: [On] ^| Enable hotkey | | Timeout [ 2] *| detection when system | | CSM Support [Yes] *| resuming from | | Quick Boot [Disabled] *| Hibernate state | | Diagnostic Splash Screen [Enabled] *| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Disabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled Disables Hotkey detection when system resumes from Hibernate state Enabled (default) Enables Hotkey detection when system resumes from Hibernate state Bengal (VL-EPMe-30) BIOS Reference Manual 19 Main Menu Main  Boot Features  UEFI Boot Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | NumLock: [On] ^| Enable the UEFI boot. | | Timeout [ 2] *| | | CSM Support [Yes] *| | | Quick Boot [Disabled] *| | | Diagnostic Splash Screen [Enabled] *| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Disabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled Disables Unified Extensible Firmware Interface (UEFI) boot Enabled (default) Enables Unified Extensible Firmware Interface (UEFI) boot Bengal (VL-EPMe-30) BIOS Reference Manual 20 Main Menu Main  Boot Features  Legacy Boot Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | CSM Support [Yes] ^| Enable the Legacy | | Quick Boot [Disabled] +| boot. | | Diagnostic Splash Screen [Enabled] +| | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Disabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled Disables Legacy boot Enabled (default) Enables Legacy boot Bengal (VL-EPMe-30) BIOS Reference Manual 21 Main Menu Main  Boot Features  Boot In Legacy Video Mode Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | CSM Support [Yes] ^| Enable to force the | | Quick Boot [Disabled] +| display adapter to | | Diagnostic Splash Screen [Enabled] +| switch the video mode | | Diagnostic Summary Screen [Disabled] *| to Text Mode 3 at the | | BIOS Level USB [Enabled] *| end of BIOS POST for | | Console Redirection [Disabled] *| non-UEFI boot mode | | Allow Hotkey in S4 resume [Enabled] +| (Legacy Boot). Some | | UEFI Boot [Enabled] +| legacy software, such | | Legacy Boot [Enabled] v| as DUET, requires | | Boot in Legacy Video Mode [Disabled] *| that the BIOS | | Load OPROM [On Demand] v| explicitly enter text | | | video mode prior to | | | boot. | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled (default) Does not force a video mode switch to Text Mode 3. Enabled Forces the display adapter to switch to Text Mode 3 at the end of BIOS POST for non-UEFI boot mode (that is, Legacy Boot). Bengal (VL-EPMe-30) BIOS Reference Manual 22 Main Menu Main  Boot Features  Load OPROM Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Boot Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | CSM Support [Yes] ^| Load all OPROMs or on | | Quick Boot [Disabled] +| demand according to | | Diagnostic Splash Screen [Enabled] +| the boot device. | | Diagnostic Summary Screen [Disabled] *| | | BIOS Level USB [Enabled] *| | | Console Redirection [Disabled] *| | | Allow Hotkey in S4 resume [Enabled] +| | | UEFI Boot [Enabled] +| | | Legacy Boot [Enabled] v| | | Boot in Legacy Video Mode [Disabled] *| | | Load OPROM [On Demand] v| | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options All Load all option ROMs. On Demand (default) Load option ROMs (OPROMs) on demand according to the requirements of the boot device. Bengal (VL-EPMe-30) BIOS Reference Manual 23 Main Menu Main  Error Manager Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | System Date [12/31/2017] |------------------------| | System Time [12:34:25] | | | | Display Error Manager | | > System Information | Log information. | | > Boot Features | | | > Error Manager | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Bengal (VL-EPMe-30) BIOS Reference Manual 24 Main Menu Main  Error Manager  View Error Manager Log Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Error Manager | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | View Error Manager Log [Enter] | Display Error Manager | | Clear Error Manager Log [Enter] | Log information. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Press to view the Error Manager Log information. Bengal (VL-EPMe-30) BIOS Reference Manual 25 Main Menu Main  Error Manager  Clear Error Manager Log Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Error Manager | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | View Error Manager Log [Enter] | Clear Error Manager | | Clear Error Manager Log [Enter] | Log. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Press to clear the Error Manager Log information. Bengal (VL-EPMe-30) BIOS Reference Manual 26 Advanced Menu 3 The Advanced menu enables you to:         Select the operating system Configure VersaLogic product-specific features Configure CPU parameters Configure graphics and non-core related parameters Configure chipset parameters Configure certain security/TXE (Trusted Execution Environment) parameters Configure thermal monitor parameters Examine SMBIOS event log items Top-level view of Advanced menu screen: Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Setup Warning: |------------------------| | Setting items on this screen to incorrect | | | values may cause system to malfunction! | Select which OS will | | | be loaded. | | | | | OS Selection [Linux] | Warning: Linux boot | | | may fail if Windows | | > VersaLogic Features | is selected. | | > CPU Configuration | | | > Graphics/Uncore Configuration | | | > South Cluster Configuration | | | > Security Configuration | | | > Thermal | | | > SMBIOS Event Log | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Bengal (VL-EPMe-30) BIOS Reference Manual 27 Advanced Menu Advanced  OS Selection Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Setup Warning: |------------------------| | Setting items on this screen to incorrect | | | values may cause system to malfunction! | Select which OS will | | | be loaded. | | | | | OS Selection [Linux] | Warning: Linux boot | | | may fail if Windows | | > VersaLogic Features | is selected. | | > CPU Configuration | | | > Graphics/Uncore Configuration | | | > South Cluster Configuration | | | > Security Configuration | | | > Thermal | | | > SMBIOS Event Log | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Windows Selects Microsoft Windows as the boot operating system [Assumes boot device contains a Microsoft Windows operating system.] Linux (default) Selects Linux as the boot operating system [Assumes boot device contains a Linux operating system.] Bengal (VL-EPMe-30) BIOS Reference Manual 28 Advanced Menu Advanced  VersaLogic Features Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | VersaLogic Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | FPGA Revision [ 6] ^| The Mini Card slot | | FPGA Flags [EXTEMP] *| can support either a | | *| PCIe Mini Card or an | | Battery Status [OK] *| mSATA module. The | | *| mSATA specifications | | Fan Speed (RPM) [ 5430] *| states that Pin 51 on | | *| the connector can be | | Mini Card Mode [Pin 43 or 51 mSATA Detect] *| used to automatically | | *| detect an mSATA | | UART1 [Enabled] *| module. But some | | Base Address [3F8] *| modules also use Pin | | IRQ [IRQ4] *| 43 due to conflicts | | Mode [RS-232] +| on Pin 51. Almost all | | +| modules will be | | UART2 [Enabled] v| correctly detected by | | Base Address [2F8] | using the setting of | | IRQ [IRQ3] *| Pin 43 or Pin 51 mSATA | | Mode [RS-232] +| detect, but there may | | | be cases on older or | | | non-standard modules | | | where more specific | | | settings are required | | | including forcing the | | | slot to always be a | | | PCIe Mini Card or an | | | mSATA module. | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit This screen provides information on the FPGA, battery status, and fan speed. Bengal (VL-EPMe-30) BIOS Reference Manual 29 Advanced Menu Advanced  VersaLogic Features  Mini Card Mode Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | VersaLogic Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | FPGA Revision [ 6] ^| The Mini Card slot | | FPGA Flags [EXTEMP] *| can support either a | | *| PCIe Mini Card or an | | Battery Status [OK] *| mSATA module. The | | *| mSATA specifications | | Fan Speed (RPM) [ 5430] *| states that Pin 51 on | | *| the connector can be | | Mini Card Mode [Pin 43 or 51 mSATA Detect] *| used to automatically | | *| detect an mSATA | | UART1 [Enabled] *| module. But some | | Base Address [3F8] *| modules also use Pin | | IRQ [IRQ4] *| 43 due to conflicts | | Mode [RS-232] +| on Pin 51. Almost all | | +| modules will be | | UART2 [Enabled] v| correctly detected by | | Base Address [2F8] | using the setting of | | IRQ [IRQ3] *| Pin 43 or Pin 51 mSATA | | Mode [RS-232] +| detect, but there may | | | be cases on older or | | | non-standard modules | | | where more specific | | | settings are required | | | including forcing the | | | slot to always be a | | | PCIe Mini Card or an | | | mSATA module. | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Pin 43 or 51 mSATA Detect (default) Pin 43 mSATA Detect Options Pin 51 mSATA Detect Force PCIe Mini Card Mode Force mSATA SSD Mode Bengal (VL-EPMe-30) BIOS Reference Manual 30 Advanced Menu Advanced  VersaLogic Features  UART1 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | VersaLogic Features | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | FPGA Revision [ 6] ^| Enable or disable | | FPGA Flags [EXTEMP] *| UART1. | | *| | | Battery Status [OK] *| | | *| | | Fan Speed (RPM) [ 5400] *| | | *| | | Mini Card Mode [Pin 43 or 51 mSATA Detect] *| | | *| | | UART1 [Enabled] *| | | Base Address [3F8] *| | | IRQ [IRQ4] *| | | Mode [RS-232] +| | | +| | | UART2 [Enabled] v| | | Base Address [2F8] | | | IRQ [IRQ3] *| | | Mode [RS-232] +| | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled Disables UART1 Enabled (default) Enables UART1 Bengal (VL-EPMe-30) BIOS Reference Manual 31 Advanced Menu Advanced  VersaLogic Features  UART1  Base Address Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | VersaLogic Features | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | FPGA Revision [ 6] ^| Select the base | | FPGA Flags [EXTEMP] *| address for UART1. | | *| | | Battery Status [OK] *| | | *| | | Fan Speed (RPM) [ 5400] *| | | *| | | Mini Card Mode [Pin 43 or 51 mSATA Detect] *| | | *| | | UART1 [Enabled] *| | | Base Address [3F8] *| | | IRQ [IRQ4] *| | | Mode [RS-232] +| | | +| | | UART2 [Enabled] v| | | Base Address [2F8] | | | IRQ [IRQ3] *| | | Mode [RS-232] +| | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit 3F8 (default) 2F8 3E8 2E8 Options 200 208 220 228 238 338 Bengal (VL-EPMe-30) BIOS Reference Manual 32 Advanced Menu Advanced  VersaLogic Features  UART1  IRQ Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | VersaLogic Features | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | FPGA Revision [ 6] ^| Select the IRQ for | | FPGA Flags [EXTEMP] *| UART1, or disable it. | | *| | | Battery Status [OK] *| | | *| | | Fan Speed (RPM) [ 5400] *| | | *| | | Mini Card Mode [Pin 43 or 51 mSATA Detect] *| | | *| | | UART1 [Enabled] *| | | Base Address [3F8] *| | | IRQ [IRQ4] *| | | Mode [RS-232] +| | | +| | | UART2 [Enabled] v| | | Base Address [2F8] | | | IRQ [IRQ3] *| | | Mode [RS-232] +| | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Disabled IRQ3 IRQ4 (default) IRQ5 Options IRQ10 IRQ6 IRQ7 IRQ9 IRQ11 Bengal (VL-EPMe-30) BIOS Reference Manual 33 Advanced Menu Advanced  VersaLogic Features  UART1  Mode Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | VersaLogic Features | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | FPGA Revision [ 6] ^| Select the mode for | | FPGA Flags [EXTEMP] *| UART1. | | *| | | Battery Status [OK] *| | | *| | | Fan Speed (RPM) [ 5400] *| | | *| | | Mini Card Mode [Pin 43 or 51 mSATA Detect] *| | | *| | | UART1 [Enabled] *| | | Base Address [3F8] *| | | IRQ [IRQ4] *| | | Mode [RS-232] +| | | +| | | UART2 [Enabled] v| | | Base Address [2F8] | | | IRQ [IRQ3] *| | | Mode [RS-232] +| | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit RS-232 (default) Options RS-422 RS-485 (Manual Direction Control) RS-485 (Automatic Direction Control) Bengal (VL-EPMe-30) BIOS Reference Manual 34 Advanced Menu Advanced  VersaLogic Features  UART2 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | VersaLogic Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | FPGA Revision [ 6] ^| Enable or disable | | FPGA Flags [EXTEMP] *| UART2. | | | | | Battery Status [OK] ^| | | +| | | Fan Speed (RPM) [ 5370] +| | | *| | | Mini Card Mode [Pin 43 or 51 mSATA Detect] *| | | *| | | UART1 [Enabled] *| | | Base Address [3F8] *| | | IRQ [IRQ4] *| | | Mode [RS-232] *| | | *| | | UART2 [Enabled] *| | | Base Address [2F8] *| | | IRQ [IRQ3] *| | | Mode [RS-232] v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled Disables UART2 Enabled (default) Enables UART2 Bengal (VL-EPMe-30) BIOS Reference Manual 35 Advanced Menu Advanced  VersaLogic Features  UART2  Base Address Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | VersaLogic Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | FPGA Revision [ 6] ^| Selects the base | | FPGA Flags [EXTEMP] *| address for UART2. | | | | | Battery Status [OK] ^| | | +| | | Fan Speed (RPM) [ 5370] +| | | *| | | Mini Card Mode [Pin 43 or 51 mSATA Detect] *| | | *| | | UART1 [Enabled] *| | | Base Address [3F8] *| | | IRQ [IRQ4] *| | | Mode [RS-232] *| | | *| | | UART2 [Enabled] *| | | Base Address [2F8] *| | | IRQ [IRQ3] *| | | Mode [RS-232] v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit 3F8 2F8 (default) 3E8 2E8 Options 200 208 220 228 238 338 Bengal (VL-EPMe-30) BIOS Reference Manual 36 Advanced Menu Advanced  VersaLogic Features  UART2  IRQ Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | VersaLogic Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | FPGA Revision [ 6] ^| Select the IRQ for | | FPGA Flags [EXTEMP] *| UART2, or disable it. | | | | | Battery Status [OK] ^| | | +| | | Fan Speed (RPM) [ 5370] +| | | *| | | Mini Card Mode [Pin 43 or 51 mSATA Detect] *| | | *| | | UART1 [Enabled] *| | | Base Address [3F8] *| | | IRQ [IRQ4] *| | | Mode [RS-232] *| | | *| | | UART2 [Enabled] *| | | Base Address [2F8] *| | | IRQ [IRQ3] *| | | Mode [RS-232] v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Disabled IRQ3 (default) IRQ4 IRQ5 Options IRQ10 IRQ6 IRQ7 IRQ9 IRQ11 Bengal (VL-EPMe-30) BIOS Reference Manual 37 Advanced Menu Advanced  VersaLogic Features  UART2  Mode Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | VersaLogic Features | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | FPGA Revision [ 6] ^| Selects the mode for | | FPGA Flags [EXTEMP] *| UART2. | | | | | Battery Status [OK] ^| | | +| | | Fan Speed (RPM) [ 5370] +| | | *| | | Mini Card Mode [Pin 43 or 51 mSATA Detect] *| | | *| | | UART1 [Enabled] *| | | Base Address [3F8] *| | | IRQ [IRQ4] *| | | Mode [RS-232] *| | | *| | | UART2 [Enabled] *| | | Base Address [2F8] *| | | IRQ [IRQ3] *| | | Mode [RS-232] v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit RS-232 (default) Options RS-422 RS-485 (Manual Direction Control) RS-485 (Automatic Direction Control) Bengal (VL-EPMe-30) BIOS Reference Manual 38 Advanced Menu Advanced  CPU Configuration Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Setup Warning: |------------------------| | Setting items on this screen to incorrect | | | values may cause system to malfunction! | | | | | | | | | OS Selection [Linux] | | | | | | > VersaLogic Features | | | > CPU Configuration | | | > Graphics/Uncore Configuration | | | > South Cluster Configuration | | | > Security Configuration | | | > Thermal | | | > SMBIOS Event Log | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit This is the top-level screen for the CPU Configuration menu. Bengal (VL-EPMe-30) BIOS Reference Manual 39 Advanced Menu Advanced  CPU Configuration  Execute Disable Bit Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | CPU Configuration | Execute Disable Bit | | Execute Disable Bit [Enable] | prevent certain | | AES-NI [Enable] | classes of malicious | | Limit CPUID Maximum [Disable] | buffer overflow | | Bi-directional PROCHOT# [Enable] | attacks when combined | | VTX-2 [Enable] | with a supporting OS | | TM1 [Enable] | | | DTS [Enable] | | | Intel Hyper-Threading Technology Not | | | Supported | | | | | | > CPU Power Management | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 40 Advanced Menu Advanced  CPU Configuration  AES-NI Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | CPU Configuration | AES-NI | | Execute Disable Bit [Enable] | | | AES-NI [Enable] | | | Limit CPUID Maximum [Disable] | | | Bi-directional PROCHOT# [Enable] | | | VTX-2 [Enable] | | | TM1 [Enable] | | | DTS [Enable] | | | Intel Hyper-Threading Technology Not | | | Supported | | | | | | > CPU Power Management | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Disables Advanced Encryption Standard New Instructions (AES-NI) Enable (default) Enables Advanced Encryption Standard New Instructions (AES-NI) Bengal (VL-EPMe-30) BIOS Reference Manual 41 Advanced Menu Advanced  CPU Configuration  Limit CPUID Maximum Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | CPU Configuration | When enabled, code | | Execute Disable Bit [Enable] | cannot execute CPUID | | AES-NI [Enable] | function > 3. | | Limit CPUID Maximum [Disable] | | | Bi-directional PROCHOT# [Enable] | | | VTX-2 [Enable] | | | TM1 [Enable] | | | DTS [Enable] | | | Intel Hyper-Threading Technology Not | | | Supported | | | | | | > CPU Power Management | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable (default) Enable Bengal (VL-EPMe-30) BIOS Reference Manual 42 Advanced Menu Advanced  CPU Configuration  Bi-directional PROCHOT# Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | CPU Configuration | When a processor | | Execute Disable Bit [Enable] | thermal sensor trips | | AES-NI [Enable] | (either core), the | | Limit CPUID Maximum [Disable] | PROCHOT# will be | | Bi-directional PROCHOT# [Enable] | driven. | | VTX-2 [Enable] | If bi-direction is | | TM1 [Enable] | enabled, external | | DTS [Enable] | agents can drive | | Intel Hyper-Threading Technology Not | PROCHOT# to throttle | | Supported | the processor. | | | | | > CPU Power Management | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 43 Advanced Menu Advanced  CPU Configuration  VTX-2 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | CPU Configuration | To enable or disable | | Execute Disable Bit [Enable] | the VTX-2 Mode support | | AES-NI [Enable] | | | Limit CPUID Maximum [Disable] | | | Bi-directional PROCHOT# [Enable] | | | VTX-2 [Enable] | | | TM1 [Enable] | | | DTS [Enable] | | | Intel Hyper-Threading Technology Not | | | Supported | | | | | | > CPU Power Management | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Disables VTX-2 virtualization technology Enable (default) Enables VTX-2 virtualization technology Bengal (VL-EPMe-30) BIOS Reference Manual 44 Advanced Menu Advanced  CPU Configuration  TM1 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | CPU Configuration | Enable/Disable TM1 | | Execute Disable Bit [Enable] | | | AES-NI [Enable] | | | Limit CPUID Maximum [Disable] | | | Bi-directional PROCHOT# [Enable] | | | VTX-2 [Enable] | | | TM1 [Enable] | | | DTS [Enable] | | | Intel Hyper-Threading Technology Not | | | Supported | | | | | | > CPU Power Management | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Disables Thermal Monitor 1 Enable (default) Enables Thermal Monitor 1 Bengal (VL-EPMe-30) BIOS Reference Manual 45 Advanced Menu Advanced  CPU Configuration  DTS Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | CPU Configuration | Enabled/Disable | | Execute Disable Bit [Enable] | Digital Thermal Sensor | | AES-NI [Enable] | | | Limit CPUID Maximum [Disable] | | | Bi-directional PROCHOT# [Enable] | | | VTX-2 [Enable] | | | TM1 [Enable] | | | DTS [Enable] | | | Intel Hyper-Threading Technology Not | | | Supported | | | | | | > CPU Power Management | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Disables Digital Thermal Sensor Enable (default) Enables Digital Thermal Sensor Bengal (VL-EPMe-30) BIOS Reference Manual 46 Advanced Menu Advanced  CPU Configuration  Intel Hyper-Threading Technology Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | CPU Configuration | | | Execute Disable Bit [Enable] | | | AES-NI [Enable] | | | Limit CPUID Maximum [Disable] | | | Bi-directional PROCHOT# [Enable] | | | VTX-2 [Enable] | | | TM1 [Enable] | | | DTS [Enable] | | | Intel Hyper-Threading Technology Not Supported | | | | | | | | | > CPU Power Management | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit  Note: This feature is not supported at this time. Bengal (VL-EPMe-30) BIOS Reference Manual 47 Advanced Menu Advanced  CPU Power Management Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Power Management | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | System Power Options | | | Intel(R) SpeedStep(tm) [Enable] | | | Boot performance mode [Max Performance] | | | Intel Turbo Boost Technology [Enable] | | | C-States [Enable] | | | Enhanced C-states [Enable] | | | Max C State [C7] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit This is the top-level screen of the CPU Power Management menu. Bengal (VL-EPMe-30) BIOS Reference Manual 48 Advanced Menu Advanced  CPU Power Management  Intel SpeedStep Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Power Management | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | System Power Options | Enable processor | | Intel(R) SpeedStep(tm) [Enable] | performance states | | Boot performance mode [Max Performance] | (P-States). | | Intel Turbo Boost Technology [Enable] | | | C-States [Enable] | | | Enhanced C-states [Enable] | | | Max C State [C7] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 49 Advanced Menu Advanced  CPU Power Management  Intel SpeedStep  Boot Performance Mode Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Power Management | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | System Power Options | Select the | | Intel(R) SpeedStep(tm) [Enable] | performance state | | Boot performance mode [Max Performance] | that the BIOS will | | Intel Turbo Boost Technology [Enable] | set before OS handoff. | | C-States [Enable] | | | Enhanced C-states [Enable] | | | Max C State [C7] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Max Performance (default) Max Battery Bengal (VL-EPMe-30) BIOS Reference Manual 50 Advanced Menu Advanced  CPU Power Management  Intel Turbo Boost Technology Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Power Management | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | System Power Options | Enable to | | Intel(R) SpeedStep(tm) [Enable] | automatically allow | | Boot performance mode [Max Performance] | processor cores to | | Intel Turbo Boost Technology [Enable] | run faster than the | | C-States [Enable] | base operating | | Enhanced C-states [Enable] | frequency if it's | | Max C State [C7] | operating below | | | power, current, and | | | temperature | | | specification limits. | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 51 Advanced Menu Advanced  CPU Power Management  C-States Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Power Management | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | System Power Options | Enable/Disable C | | Intel(R) SpeedStep(tm) [Enable] | States | | Boot performance mode [Max Performance] | | | Intel Turbo Boost Technology [Enable] | | | C-States [Enable] | | | Enhanced C-states [Enable] | | | Max C State [C7] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 52 Advanced Menu Advanced  CPU Power Management  C-States  Enhanced C-States Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Power Management | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | System Power Options | Enable/Disable C1E, | | Intel(R) SpeedStep(tm) [Enable] | C2E and C4E. When | | Boot performance mode [Max Performance] | enabled, CPU will | | Intel Turbo Boost Technology [Enable] | switch to minimum | | C-States [Enable] | speed when all cores | | Enhanced C-states [Enable] | enter C-State. | | Max C State [C7] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 53 Advanced Menu Advanced  CPU Power Management  Max C State Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | CPU Power Management | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | System Power Options | This option controls | | Intel(R) SpeedStep(tm) [Enable] | the Max C State that | | Boot performance mode [Max Performance] | the processor will | | Intel Turbo Boost Technology [Enable] | support. | | C-States [Enable] | | | Enhanced C-states [Enable] | | | Max C State [C7] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit C7 (default) Options C6 C1 Bengal (VL-EPMe-30) BIOS Reference Manual 54 Advanced Menu Advanced  Graphics/Uncore Configuration Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Setup Warning: |------------------------| | Setting items on this screen to incorrect | | | values may cause system to malfunction! | | | | | | | | | OS Selection [Linux] | | | | | | > VersaLogic Features | | | > CPU Configuration | | | > Graphics/Uncore Configuration | | | > South Cluster Configuration | | | > Security Configuration | | | > Thermal | | | > SMBIOS Event Log | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit This menu enables you to configure graphics and “uncore” (that is, outside of the SoC’s core) functions. Bengal (VL-EPMe-30) BIOS Reference Manual 55 Advanced Menu Advanced  Graphics/Uncore Configuration  GOP Driver Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | GOP Configuration ^| Enable GOP Driver | | GOP Driver [Enable] *| will unload VBIOS; | | *| Disable it will load | | IGD Configuration *| VBIOS | | Integrated Graphics Device [Enable] *| | | Primary Display [Auto] *| | | RC6(Render Standby) [Enable] *| | | PAVC [LITE Mode] *| | | GTT Size [2MB] *| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] +| | | IGD Turbo [Auto] +| | | +| | | IGD - LCD Control v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Enable (default) Enables the Graphics Output Protocol (GOP) driver Disable Disables the Graphics Output Protocol (GOP) driver Bengal (VL-EPMe-30) BIOS Reference Manual 56 Advanced Menu Advanced  Graphics/Uncore Configuration  Integrated Graphics Device Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | GOP Configuration ^| Enable : Enable | | GOP Driver [Enable] *| Integrated Graphics | | *| Device (IGD) when | | IGD Configuration *| selected as the | | Integrated Graphics Device [Enable] *| Primary Video | | Primary Display [Auto] *| Adaptor. Disable: | | RC6(Render Standby) [Enable] *| Always disable IGD | | PAVC [LITE Mode] *| | | GTT Size [2MB] *| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] +| | | IGD Turbo [Auto] +| | | +| | | IGD - LCD Control v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 57 Advanced Menu Advanced  Graphics/Uncore Configuration  Primary Display Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | GOP Configuration ^| Select which of | | GOP Driver [Enable] *| IGD/PCI Graphics | | *| device should be | | IGD Configuration *| Primary Display Or | | Integrated Graphics Device [Enable] *| select SG for | | Primary Display [Auto] *| Switchable/Hybrid Gfx. | | RC6(Render Standby) [Enable] *| | | PAVC [LITE Mode] *| | | GTT Size [2MB] *| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] +| | | IGD Turbo [Auto] +| | | +| | | IGD - LCD Control v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Auto (default) Options IGD PCIe SG Bengal (VL-EPMe-30) BIOS Reference Manual 58 Advanced Menu Advanced  Graphics/Uncore Configuration  RC6 (Render Standby) Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | GOP Configuration ^| Check to enable | | GOP Driver [Enable] *| render standby support | | *| | | IGD Configuration *| | | Integrated Graphics Device [Enable] *| | | Primary Display [Auto] *| | | RC6(Render Standby) [Enable] *| | | PAVC [LITE Mode] *| | | GTT Size [2MB] *| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] +| | | IGD Turbo [Auto] +| | | +| | | IGD - LCD Control v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Enable (default) Disable Bengal (VL-EPMe-30) BIOS Reference Manual 59 Advanced Menu Advanced  Graphics/Uncore Configuration  PAVC Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | GOP Configuration ^| Enable/Disable | | GOP Driver [Enable] *| Protected Audio Video | | *| Control | | IGD Configuration *| | | Integrated Graphics Device [Enable] *| | | Primary Display [Auto] *| | | RC6(Render Standby) [Enable] *| | | PAVC [LITE Mode] *| | | GTT Size [2MB] *| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] +| | | IGD Turbo [Auto] +| | | +| | | IGD - LCD Control v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Disables Protected Audio Video Control (PAVC) support LITE Mode (default) Allows PAVC-protected Blu-ray disks to play. SERPENT Mode Disables the Windows Aero interface and uses ~96 MB of RAM for encrypted data that the operating system cannot see. Bengal (VL-EPMe-30) BIOS Reference Manual 60 Advanced Menu Advanced  Graphics/Uncore Configuration  GTT Size Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | GOP Configuration ^| Select the GTT Size | | GOP Driver [Enable] *| | | *| | | IGD Configuration *| | | Integrated Graphics Device [Enable] *| | | Primary Display [Auto] *| | | RC6(Render Standby) [Enable] *| | | PAVC [LITE Mode] *| | | GTT Size [2MB] *| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] +| | | IGD Turbo [Auto] +| | | +| | | IGD - LCD Control v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options 1 MB Sets the Graphics Translation Table (GTT) size to 1 MB 2 MB (default) Sets the Graphics Translation Table (GTT) size to 2 MB Bengal (VL-EPMe-30) BIOS Reference Manual 61 Advanced Menu Advanced  Graphics/Uncore Configuration  Aperture Size Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | GOP Configuration ^| Select the Aperture | | GOP Driver [Enable] *| Size | | *| | | IGD Configuration *| | | Integrated Graphics Device [Enable] *| | | Primary Display [Auto] *| | | RC6(Render Standby) [Enable] *| | | PAVC [LITE Mode] *| | | GTT Size [2MB] *| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] +| | | IGD Turbo [Auto] +| | | +| | | IGD - LCD Control v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit 128 MB Options 256 MB (default) 512 MB Bengal (VL-EPMe-30) BIOS Reference Manual 62 Advanced Menu Advanced  Graphics/Uncore Configuration  DVMT Pre-Allocated Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | GOP Configuration ^| Select DVMT 5.0 | | GOP Driver [Enable] *| Pre-Allocated (Fixed) | | *| Graphics Memory size | | IGD Configuration *| used by the Internal | | Integrated Graphics Device [Enable] *| Graphics Device | | Primary Display [Auto] *| | | RC6(Render Standby) [Enable] *| | | PAVC [LITE Mode] *| | | GTT Size [2MB] *| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] +| | | IGD Turbo [Auto] +| | | +| | | IGD - LCD Control v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options 64M (default) Sets the Dynamic Video Memory Technology (DVMT) size to 64 MB 96M Sets the Dynamic Video Memory Technology (DVMT) size to 96 MB 128M Sets the Dynamic Video Memory Technology (DVMT) size to 128 MB 160M Sets the Dynamic Video Memory Technology (DVMT) size to 160 MB 192M Sets the Dynamic Video Memory Technology (DVMT) size to 192 MB 224M Sets the Dynamic Video Memory Technology (DVMT) size to 224MB 256M Sets the Dynamic Video Memory Technology (DVMT) size to 256 MB 288M Sets the Dynamic Video Memory Technology (DVMT) size to 288 MB 320M Sets the Dynamic Video Memory Technology (DVMT) size to 320 MB 352M Sets the Dynamic Video Memory Technology (DVMT) size to 352 MB 384M Sets the Dynamic Video Memory Technology (DVMT) size to 384 MB 416M Sets the Dynamic Video Memory Technology (DVMT) size to 416 MB 448M Sets the Dynamic Video Memory Technology (DVMT) size to 448 MB 480M Sets the Dynamic Video Memory Technology (DVMT) size to 480 MB 512M Sets the Dynamic Video Memory Technology (DVMT) size to 512 MB Bengal (VL-EPMe-30) BIOS Reference Manual 63 Advanced Menu Advanced  Graphics/Uncore Configuration  DVMT Total Gfx Mem Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | GOP Configuration ^| Select DVMT5.0 Total | | GOP Driver [Enable] *| Graphic Memory size | | *| used by the Internal | | IGD Configuration *| Graphics Device | | Integrated Graphics Device [Enable] *| | | Primary Display [Auto] *| | | RC6(Render Standby) [Enable] *| | | PAVC [LITE Mode] *| | | GTT Size [2MB] *| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] +| | | IGD Turbo [Auto] +| | | +| | | IGD - LCD Control v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options 128 MB 256 MB (default) Bengal (VL-EPMe-30) BIOS Reference Manual 64 Advanced Menu Advanced  Graphics/Uncore Configuration  IGD Turbo Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | GOP Configuration ^| Select the IGD Turbo | | GOP Driver [Enable] *| feature, if Auto | | *| selected, IGD Turbo | | IGD Configuration *| will only be enabled | | Integrated Graphics Device [Enable] *| when SOC stepping is | | Primary Display [Auto] *| B0 or above. | | RC6(Render Standby) [Enable] *| | | PAVC [LITE Mode] *| | | GTT Size [2MB] *| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] +| | | IGD Turbo [Auto] +| | | +| | | IGD - LCD Control v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Auto (default) Options Enable Disable Bengal (VL-EPMe-30) BIOS Reference Manual 65 Advanced Menu Advanced  Graphics/Uncore Configuration  BIA Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | RC6(Render Standby) [Enable] ^| >>Auto: GMCH Use | | PAVC [LITE Mode] +| VBIOS Default; | | GTT Size [2MB] +| >>Level n: Enabled | | Aperture Size [256MB] +| with Selected | | DVMT Pre-Allocated [64M] +| Aggressiveness Level. | | DVMT Total Gfx Mem [256M] *| | | IGD Turbo [Auto] *| | | *| | | IGD - LCD Control *| | | BIA [Auto] *| | | LCD Panel Type [Auto] *| | | IGD Boot Type [Auto] *| | | Panel Scaling [Auto] *| | | GMCH BLC Control [PWM-Inverted] *| | | v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Auto (default) Auto-configures Backlight Image Adaptation (BIA) Disabled Level 1 Options Level 2 Level 3 Level 4 Level 5 Bengal (VL-EPMe-30) BIOS Reference Manual 66 Advanced Menu Advanced  Graphics/Uncore Configuration  LCD Panel Type Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | RC6(Render Standby) [Enable] ^| | | PAVC [LITE Mode] +| | | GTT Size [2MB] +| | | Aperture Size [256MB] +| | | DVMT Pre-Allocated [64M] +| | | DVMT Total Gfx Mem [256M] *| | | IGD Turbo [Auto] *| | | *| | | IGD - LCD Control *| | | BIA [Auto] *| | | LCD Panel Type [Auto] *| | | IGD Boot Type [Auto] *| | | Panel Scaling [Auto] *| | | GMCH BLC Control [PWM-Inverted] *| | | v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Auto (default) Panel1 640 x 480 Panel2 800 x 600 Panel3 1024 x 768 Panel4 1280 x 1024 Panel5 1400 x 1050 Panel6 1400 x 1050 Panel7 1600 x 1200 Options Panel8 1360 x 768 Panel9 1680 x 1050 Panel10 1820 x 1200 Panel11 1440 x 900 Panel12 1280 x 1024 Panel13 1600 x 900 Panel14 1024 x 768 Panel15 1920 x 1080 Panel16 2048 x 1536 Bengal (VL-EPMe-30) BIOS Reference Manual 67 Advanced Menu Advanced  Graphics/Uncore Configuration  IGD Boot Type Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Primary Display [Auto] ^| Selects display | | RC6(Render Standby) [Enable] +| interface for | | PAVC [LITE Mode] +| Integrated Graphics | | GTT Size [2MB] +| Device (IGD) at | | Aperture Size [256MB] *| system boot. | | DVMT Pre-Allocated [64M] *| | | DVMT Total Gfx Mem [256M] *| If CSM is enabled: | | IGD Turbo [Auto] *| HDMI PortB=EFP1 | | *| DP PortB=EFP1 | | IGD - LCD Control *| DP PortC=EFP2 | | BIA [Auto] *| eDP=LFP1 | | LCD Panel Type [Auto] *| DSI PortA=LFP2 | | IGD Boot Type [Auto] *| DSI ProtC=LFP2 | | Panel Scaling [Auto] +| | | GMCH BLC Control [PWM-Inverted] v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Auto (default) VGA Port HDMI Port B Options DP Port B DP Port C DSI Port A DSI Port C Bengal (VL-EPMe-30) BIOS Reference Manual 68 Advanced Menu Advanced  Graphics/Uncore Configuration  Panel Scaling Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | Primary Display [Auto] ^| Select the LCD panel | | RC6(Render Standby) [Enable] +| scaling option used | | PAVC [LITE Mode] +| by Internal Graphics | | GTT Size [2MB] +| Device. | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] *| | | DVMT Total Gfx Mem [256M] *| | | IGD Turbo [Auto] *| | | *| | | IGD - LCD Control *| | | BIA [Auto] *| | | LCD Panel Type [Auto] *| | | IGD Boot Type [Auto] *| | | Panel Scaling [Auto] +| | | GMCH BLC Control [PWM-Inverted] v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Auto (default) Options Centering Stretching Bengal (VL-EPMe-30) BIOS Reference Manual 69 Advanced Menu Advanced  Graphics/Uncore Configuration  GMCH BLC Control Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Graphics/Uncore Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | Primary Display [Auto] ^| Back Light Control | | RC6(Render Standby) [Enable] +| Setting | | PAVC [LITE Mode] +| | | GTT Size [2MB] +| | | Aperture Size [256MB] *| | | DVMT Pre-Allocated [64M] *| | | DVMT Total Gfx Mem [256M] *| | | IGD Turbo [Auto] *| | | *| | | IGD - LCD Control *| | | BIA [Auto] *| | | LCD Panel Type [Auto] *| | | IGD Boot Type [Auto] *| | | Panel Scaling [Auto] +| | | GMCH BLC Control [PWM-Inverted] v| | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit PWM-Inverted (default) Options GMBus-Inverted PWM-Normal GMBus-Normal Bengal (VL-EPMe-30) BIOS Reference Manual 70 Advanced Menu Advanced  South Cluster Configuration Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | South Cluster Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | | | | > PCI Express Configuration | | | > USB Configuration | | | > Audio Configuration | | | > SATA Drives | | | > LPSS & SCC Configuration | | | > Miscellaneous Configuration | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit This is the top-level screen for the South Cluster Configuration sub-menu. Bengal (VL-EPMe-30) BIOS Reference Manual 71 Advanced Menu Advanced  PCI Express Configuration  PCIe 0 Speed Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | PCI Express Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | | Configure PCIe Speed | | PCIe 0 Speed [Auto] | | | PCIe 1 Speed [Gen1] | | | PCIe 2 Speed [Auto] | | | PCIe 3 Speed [Auto] | | | PCI Express Root Port 1 [Enable] | | | PCI Express Root Port 2 [Enable] | | | PCI Express Root Port 3 [Enable] | | | PCI Express Root Port 4 [Enable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Auto (default) Options Gen 1 Gen 2 Bengal (VL-EPMe-30) BIOS Reference Manual 72 Advanced Menu Advanced  PCI Express Configuration  PCIe 1 Speed Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | PCI Express Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Configure PCIe Speed | | PCIe 0 Speed [Auto] | | | PCIe 1 Speed [Gen1] | | | PCIe 2 Speed [Auto] | | | PCIe 3 Speed [Auto] | | | PCI Express Root Port 1 [Enable] | | | PCI Express Root Port 2 [Enable] | | | PCI Express Root Port 3 [Enable] | | | PCI Express Root Port 4 [Enable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Auto Options Gen 1 (default) Gen 2 Bengal (VL-EPMe-30) BIOS Reference Manual 73 Advanced Menu Advanced  PCI Express Configuration  PCIe 2 Speed Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | PCI Express Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Configure PCIe Speed | | PCIe 0 Speed [Auto] | | | PCIe 1 Speed [Gen1] | | | PCIe 2 Speed [Auto] | | | PCIe 3 Speed [Auto] | | | PCI Express Root Port 1 [Enable] | | | PCI Express Root Port 2 [Enable] | | | PCI Express Root Port 3 [Enable] | | | PCI Express Root Port 4 [Enable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Auto (default) Options Gen 1 Gen 2 Bengal (VL-EPMe-30) BIOS Reference Manual 74 Advanced Menu Advanced  PCI Express Configuration  PCIe 3 Speed Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | PCI Express Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Configure PCIe Speed | | PCIe 0 Speed [Auto] | | | PCIe 1 Speed [Gen1] | | | PCIe 2 Speed [Auto] | | | PCIe 3 Speed [Auto] | | | PCI Express Root Port 1 [Enable] | | | PCI Express Root Port 2 [Enable] | | | PCI Express Root Port 3 [Enable] | | | PCI Express Root Port 4 [Enable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Auto (default) Options Gen 1 Gen 2 Bengal (VL-EPMe-30) BIOS Reference Manual 75 Advanced Menu Advanced  PCI Express Configuration  PCI Express Root Port 1 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | PCI Express Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Control the PCI | | PCIe 0 Speed [Auto] | Express Root Port. | | PCIe 1 Speed [Gen1] | | | PCIe 2 Speed [Auto] | | | PCIe 3 Speed [Auto] | | | PCI Express Root Port 1 [Enable] | | | PCI Express Root Port 2 [Enable] | | | PCI Express Root Port 3 [Enable] | | | PCI Express Root Port 4 [Enable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Enable (default) Disable Bengal (VL-EPMe-30) BIOS Reference Manual 76 Advanced Menu Advanced  PCI Express Configuration  PCI Express Root Port 2 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | PCI Express Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Control the PCI | | PCIe 0 Speed [Auto] | Express Root Port. | | PCIe 1 Speed [Gen1] | | | PCIe 2 Speed [Auto] | | | PCIe 3 Speed [Auto] | | | PCI Express Root Port 1 [Enable] | | | PCI Express Root Port 2 [Enable] | | | PCI Express Root Port 3 [Enable] | | | PCI Express Root Port 4 [Enable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Enable (default) Disable Bengal (VL-EPMe-30) BIOS Reference Manual 77 Advanced Menu Advanced  PCI Express Configuration  PCI Express Root Port 3 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | PCI Express Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Control the PCI | | PCIe 0 Speed [Auto] | Express Root Port. | | PCIe 1 Speed [Gen1] | | | PCIe 2 Speed [Auto] | | | PCIe 3 Speed [Auto] | | | PCI Express Root Port 1 [Enable] | | | PCI Express Root Port 2 [Enable] | | | PCI Express Root Port 3 [Enable] | | | PCI Express Root Port 4 [Enable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Enable (default) Disable Bengal (VL-EPMe-30) BIOS Reference Manual 78 Advanced Menu Advanced  PCI Express Configuration  PCI Express Root Port 4 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | PCI Express Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Control the PCI | | PCIe 0 Speed [Auto] | Express Root Port. | | PCIe 1 Speed [Gen1] | | | PCIe 2 Speed [Auto] | | | PCIe 3 Speed [Auto] | | | PCI Express Root Port 1 [Enable] | | | PCI Express Root Port 2 [Enable] | | | PCI Express Root Port 3 [Enable] | | | PCI Express Root Port 4 [Enable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Enable (default) Disable Bengal (VL-EPMe-30) BIOS Reference Manual 79 Advanced Menu Advanced  USB Configuration  XHCI Link Power Management Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | USB Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | | Enable/Disable XHCI | | xHCI Mode [Disable] | Link Power Management | | XHCI Link Power Management [Enable] | | | | | | EHCI Controller [Enable] | | | USB Per-Port Control [Enable] | | | USB Port #0 [Enable] | | | USB Port #1 [Enable] | | | USB Port #2 [Enable] | | | USB Port #3 [Enable] | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 80 Advanced Menu Advanced  USB Configuration  EHCI Controller Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | USB Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Control the USB EHCI | | xHCI Mode [Disable] | (USB 2.0) functions. | | XHCI Link Power Management [Enable] | | | | One EHCI controller | | EHCI Controller [Enable] | must always be enabled | | USB Per-Port Control [Enable] | | | USB Port #0 [Enable] | | | USB Port #1 [Enable] | | | USB Port #2 [Enable] | | | USB Port #3 [Enable] | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Enable (default) Disable Bengal (VL-EPMe-30) BIOS Reference Manual 81 Advanced Menu Advanced  USB Configuration  USB Per-Port Control Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | USB Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Control each of the | | xHCI Mode [Disable] | USB ports (0~3) | | XHCI Link Power Management [Enable] | disabling | | | | | EHCI Controller [Enable] | | | USB Per-Port Control [Enable] | | | USB Port #0 [Enable] | | | USB Port #1 [Enable] | | | USB Port #2 [Enable] | | | USB Port #3 [Enable] | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 82 Advanced Menu Advanced  USB Configuration  USB Port #0 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | USB Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Enable/Disable USB | | xHCI Mode [Disable] | Port #0 | | XHCI Link Power Management [Enable] | | | | Right-angle xHCI/EHCI | | EHCI Controller [Enable] | header (J16) | | USB Per-Port Control [Enable] | | | USB Port #0 [Enable] | | | USB Port #1 [Enable] | | | USB Port #2 [Enable] | | | USB Port #3 [Enable] | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 83 Advanced Menu Advanced  USB Configuration  USB Port #1 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | USB Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Enable/Disable USB | | xHCI Mode [Disable] | Port #1 | | XHCI Link Power Management [Enable] | | | | CBR-5015 J4_Top (EHCI | | EHCI Controller [Enable] | Debug port) | | USB Per-Port Control [Enable] | | | USB Port #0 [Enable] | | | USB Port #1 [Enable] | | | USB Port #2 [Enable] | | | USB Port #3 [Enable] | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 84 Advanced Menu Advanced  USB Configuration  USB Port #2 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | USB Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Enable/Disable USB | | xHCI Mode [Disable] | Port #2 | | XHCI Link Power Management [Enable] | | | | CBR-5015 J4_Bot, both | | EHCI Controller [Enable] | J5 ports | | USB Per-Port Control [Enable] | | | USB Port #0 [Enable] | | | USB Port #1 [Enable] | | | USB Port #2 [Enable] | | | USB Port #3 [Enable] | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 85 Advanced Menu Advanced  USB Configuration  USB Port #3 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | USB Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | | Enable/Disable USB | | xHCI Mode [Disable] | Port #3 | | XHCI Link Power Management [Enable] | | | | Mini Card (J14) | | EHCI Controller [Enable] | | | USB Per-Port Control [Enable] | | | USB Port #0 [Enable] | | | USB Port #1 [Enable] | | | USB Port #2 [Enable] | | | USB Port #3 [Enable] | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 86 Advanced Menu Advanced  Audio Configuration  Audio Controller Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Audio Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Audio Controller [Disable] | Enable or disable the | | | Azalia (HD Audio) | | | device. | | | | | | Disabled = Azalia | | | will be disabled | | | | | | Enabled = Azalia will | | | be enabled | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options  Disable (default) Disable “Azalia” (high-definition) audio Enable Enable “Azalia” (high-definition) audio Note: The default setting for this menu item is Disable. When the audio controller is enabled, two additional options will be available: • Azalia VCi Enable (see page 88) • Azalia HDMI Codec (see page 89) Bengal (VL-EPMe-30) BIOS Reference Manual 87 Advanced Menu Advanced  Audio Configuration  Azalia VCi Enable Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Audio Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Audio Controller [Enable] | Enable/Disable | | Azalia VCi Enable [Enable] | Virtual Channel 1 of | | Azalia HDMI Codec [Enable] | Audio Controller | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 88 Advanced Menu Advanced  Audio Configuration  Azalia HDMI CODEC Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Audio Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Audio Controller [Enable] | Enable/Disable | | Azalia VCi Enable [Enable] | internal HDMI codec | | Azalia HDMI Codec [Enable] | for Azalia | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 89 Advanced Menu Advanced  SATA Drives  Chipset SATA Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | SATA Drives | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | SATA Drives | Enables or Disables | | | the Chipset SATA | | Chipset-SATA Controller Configuration | Controller. | | Chipset SATA [Enable] | | | Chipset SATA Mode [AHCI] | SATA Port 0 -> | | | On-Board Connector | | | (J2). | | | | | | SATA Port 1 -> mSATA | | | (J14). | | | | | | Up to 3Gb/s supported | | | per port. | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Enable (default) Enables onboard SATA ports Disable Disables onboard SATA ports Bengal (VL-EPMe-30) BIOS Reference Manual 90 Advanced Menu Advanced  SATA Drives  Chipset SATA Mode Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | SATA Drives | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | SATA Drives | IDE: Compatibility | | | mode disables AHCI | | Chipset-SATA Controller Configuration | support. AHCI: | | Chipset SATA [Enable] | Supports advanced | | Chipset SATA Mode [AHCI] | SATA features such as | | | Native Command | | | Queuing. | | | Warning: OS may not | | | boot if this setting | | | is changed after OS | | | install. | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options IDE ACHI (default) Bengal (VL-EPMe-30) BIOS Reference Manual 91 Advanced Menu Advanced  LPSS & SCC Configuration  LPSS Devices Mode Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | LPSS & SCC Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | | LPSS (Low Power | | LPSS Devices Mode [PCI Mode] | Subsystem) Devices | | | Mode Settings. | | LPSS Configuration | | | LPSS DMA #1 Support [Disable] | | | LPSS DMA #2 Support [Enable] | | | LPSS I2C #1 Support [Enable] | | | LPSS PWM #1 Support [Disable] | | | LPSS PWM #2 Support [Disable] | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options ACPI Mode PCI Mode (default) Bengal (VL-EPMe-30) BIOS Reference Manual 92 Advanced Menu Advanced  LPSS & SCC Configuration  LPSS DMA #1 Support Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | LPSS & SCC Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | | LPSS DMA #1 Support | | LPSS Devices Mode [PCI Mode] | Enable\Disable | | | | | LPSS Configuration | | | LPSS DMA #1 Support [Disable] | | | LPSS DMA #2 Support [Enable] | | | LPSS I2C #1 Support [Enable] | | | LPSS PWM #1 Support [Disable] | | | LPSS PWM #2 Support [Disable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options  Disable (default) Enable Note: The default setting for this menu item is Disable. In this mode, the following menu items are not accessible: • LPSS PWM #1 Support • LPSS PWM #2 Support Bengal (VL-EPMe-30) BIOS Reference Manual 93 Advanced Menu Advanced  LPSS & SCC Configuration  LPSS DMA #2 Support Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | LPSS & SCC Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | | LPSS DMA #2 Support | | LPSS Devices Mode [PCI Mode] | Enable\Disable | | | | | LPSS Configuration | | | LPSS DMA #1 Support [Disable] | | | LPSS DMA #2 Support [Enable] | | | LPSS I2C #1 Support [Enable] | | | LPSS PWM #1 Support [Disable] | | | LPSS PWM #2 Support [Disable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 94 Advanced Menu Advanced  LPSS & SCC Configuration  LPSS I2C #1 Support Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | LPSS & SCC Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | | LPSS I2C #1 Support | | LPSS Devices Mode [PCI Mode] | Enable\Disable | | | | | LPSS Configuration | | | LPSS DMA #1 Support [Disable] | | | LPSS DMA #2 Support [Enable] | | | LPSS I2C #1 Support [Enable] | | | LPSS PWM #1 Support [Disable] | | | LPSS PWM #2 Support [Disable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options 2 Disable Disables the I C ports and the LPSS I2C #1 support option. Enable (default) Enables I C ports and the LPSS I2C #1 support option. Bengal (VL-EPMe-30) BIOS Reference Manual 2 95 Advanced Menu Advanced  LPSS & SCC Configuration  LPSS PWM #1 Support Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | LPSS & SCC Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | | LPSS PWM #1 Support | | LPSS Devices Mode [PCI Mode] | Enable\Disable | | | | | LPSS Configuration | | | LPSS DMA #1 Support [Disable] | | | LPSS DMA #2 Support [Enable] | | | LPSS I2C #1 Support [Enable] | | | LPSS PWM #1 Support [Disable] | | | LPSS PWM #2 Support [Disable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options  Disable (default) Enable Note: This option is accessible only when LPSS DMA #1 is enabled. (See page 93.) Bengal (VL-EPMe-30) BIOS Reference Manual 96 Advanced Menu Advanced  LPSS & SCC Configuration  LPSS PWM #2 Support Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | LPSS & SCC Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | | LPSS PWM #2 Support | | LPSS Devices Mode [PCI Mode] | Enable\Disable | | | | | LPSS Configuration | | | LPSS DMA #1 Support [Disable] | | | LPSS DMA #2 Support [Enable] | | | LPSS I2C #1 Support [Enable] | | | LPSS PWM #1 Support [Disable] | | | LPSS PWM #2 Support [Disable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options  Disable (default) Enable Note: This option is accessible only when LPSS DMA #1 is enabled. (See page 93.) Bengal (VL-EPMe-30) BIOS Reference Manual 97 Advanced Menu Advanced  Miscellaneous Configuration  High Precision Timer Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Miscellaneous Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Miscellaneous Configuration | Enable or Disable the | | High Precision Timer [Enable] | High Precision Event | | Boot Time with HPET Timer [Disable] | Timer | | State After G3 [S0 State] | | | SoC Debug UART [Disable] | | | SMM Lock [Enable] | | | PCI MMIO Size [2GB] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) Bengal (VL-EPMe-30) BIOS Reference Manual 98 Advanced Menu Advanced  Miscellaneous Configuration  Boot Time with HPET Timer Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Miscellaneous Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Miscellaneous Configuration | Boot time calculation | | High Precision Timer [Enable] | with High Precision | | Boot Time with HPET Timer [Disable] | Event Timer enabled | | State After G3 [S0 State] | | | SoC Debug UART [Disable] | | | SMM Lock [Enable] | | | PCI MMIO Size [2GB] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable (default) Enable Bengal (VL-EPMe-30) BIOS Reference Manual 99 Advanced Menu Advanced  Miscellaneous Configuration  State After G3 Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Miscellaneous Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Miscellaneous Configuration | Specify what state to | | High Precision Timer [Enable] | go to when power is | | Boot Time with HPET Timer [Disable] | re-applied after a | | State After G3 [S0 State] | power failure (G3 | | SoC Debug UART [Disable] | state). | | SMM Lock [Enable] | | | PCI MMIO Size [2GB] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options S0 State (default) S5 State Bengal (VL-EPMe-30) BIOS Reference Manual 100 Advanced Menu Advanced  Miscellaneous Configuration  SoC Debug UART Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Miscellaneous Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | Miscellaneous Configuration | Enable/Disable SoC | | High Precision Timer [Enable] | Debug UART. | | Boot Time with HPET Timer [Disable] | | | State After G3 [S0 State] | WARNING: Conflicts | | SoC Debug UART [Disable] | with UART2 lines, and | | SMM Lock [Enable] | with UART1 default | | PCI MMIO Size [2GB] | base address. | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable (default) Enable Bengal (VL-EPMe-30) BIOS Reference Manual 101 Advanced Menu Advanced  Miscellaneous Configuration  SMM Lock Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Miscellaneous Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | Miscellaneous Configuration | Enabling the SMM Lock | | High Precision Timer [Enable] | feature will lock | | Boot Time with HPET Timer [Disable] | SMRAM to prevent | | State After G3 [S0 State] | additional loading of | | SoC Debug UART [Disable] | SMM drivers. | | SMM Lock [Enable] | | | PCI MMIO Size [2GB] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Allows additional SMM (System Management Mode) drivers to be loaded Enable (default) Prevents additional SMM (System Management Mode) drivers from being loaded Bengal (VL-EPMe-30) BIOS Reference Manual 102 Advanced Menu Advanced  Miscellaneous Configuration  PCI MMIO Size Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Miscellaneous Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | Miscellaneous Configuration | PCI MMIO Size | | High Precision Timer [Enable] | | | Boot Time with HPET Timer [Disable] | | | State After G3 [S0 State] | | | SoC Debug UART [Disable] | | | SMM Lock [Enable] | | | PCI MMIO Size [2GB] | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit 2GB (default) Options 1.5GB 1.25GB 1GB Bengal (VL-EPMe-30) BIOS Reference Manual 103 Advanced Menu Advanced  Security Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Setup Warning: |------------------------| | Setting items on this screen to incorrect | | | values may cause system to malfunction! | | | | | | | | | OS Selection [Linux] | | | | | | > VersaLogic Features | | | > CPU Configuration | | | > Uncore Configuration | | | > South Cluster Configuration | | | > Security Configuration | | | > Thermal | | | > SMBIOS Event Log | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit This is the top-level screen for the Security sub-menu. Bengal (VL-EPMe-30) BIOS Reference Manual 104 Advanced Menu Advanced  Security Configuration  TXE Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Security Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | TXE Configuration | Trusted Execution | | TXE FW Version 1.0.2.1060 | Engine | | TXE FW Capabilities 20001040 | | | TXE FW Features 20001040 | | | TXE FW OEM Tag 00000000 | | | TXE Firmware Mode Normal | | | TXE File System Integrity Value 0 | | | | | | TXE [Enable] | | | TXE HMRFPO [Disable] | | | TXE Firmware Update [Enable] | | | TXE EOP Message [Disable] | | | TXE Unconfiguration Perform | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) This screen also provides status on the Trusted Execution Engine (TXE). Bengal (VL-EPMe-30) BIOS Reference Manual 105 Advanced Menu Advanced  Security Configuration  TXE HMRFPO Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Security Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | TXE Configuration | Host ME(TXE) Region | | TXE FW Version 1.0.2.1060 | Flash Protection | | TXE FW Capabilities 20001040 | Override | | TXE FW Features 20001040 | | | TXE FW OEM Tag 00000000 | | | TXE Firmware Mode Normal | | | TXE File System Integrity Value 0 | | | | | | TXE [Enable] | | | TXE HMRFPO [Disable] | | | TXE Firmware Update [Enable] | | | TXE EOP Message [Disable] | | | TXE Unconfiguration Perform | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable (default) Enable This screen also provides status on the Trusted Execution Engine (TXE). Bengal (VL-EPMe-30) BIOS Reference Manual 106 Advanced Menu Advanced  Security Configuration  TXE Firmware Update Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Security Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | TXE Configuration | | | TXE FW Version 1.0.2.1060 | | | TXE FW Capabilities 20001040 | | | TXE FW Features 20001040 | | | TXE FW OEM Tag 00000000 | | | TXE Firmware Mode Normal | | | TXE File System Integrity Value 0 | | | | | | TXE [Enable] | | | TXE HMRFPO [Disable] | | | TXE Firmware Update [Enable] | | | TXE EOP Message [Disable] | | | TXE Unconfiguration Perform | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) This screen also provides status on the Trusted Execution Engine (TXE). Bengal (VL-EPMe-30) BIOS Reference Manual 107 Advanced Menu Advanced  Security Configuration  TXE EOP Message Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Security Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | TXE Configuration | Send EOP Message | | TXE FW Version 1.0.2.1060 | Before Enter OS | | TXE FW Capabilities 20001040 | | | TXE FW Features 20001040 | | | TXE FW OEM Tag 00000000 | | | TXE Firmware Mode Normal | | | TXE File System Integrity Value 0 | | | | | | TXE [Enable] | | | TXE HMRFPO [Disable] | | | TXE Firmware Update [Enable] | | | TXE EOP Message [Disable] | | | TXE Unconfiguration Perform | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable (default) Do not send an End-of-POST (EOP) message before entering the operating system Enable Send an End-of-POST (EOP) message before entering the operating system This screen also provides status on the Trusted Execution Engine (TXE). Bengal (VL-EPMe-30) BIOS Reference Manual 108 Advanced Menu Advanced  Security Configuration  TXE Unconfiguration Perform Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Security Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | TXE Configuration | Revert TXE settings | | TXE FW Version 1.0.2.1060 | to factory defaults | | TXE FW Capabilities 20001040 | | | TXE FW Features 20001040 | | | TXE FW OEM Tag 00000000 | | | TXE Firmware Mode Normal | | | TXE File System Integrity Value 0 | | | | | | TXE [Enable] | | | TXE HMRFPO [Disable] | | | TXE Firmware Update [Enable] | | | TXE EOP Message [Disable] | | | TXE Unconfiguration Perform | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options No (default) Do not perform a TXE unconfiguration Yes Perform a TXE unconfiguration Bengal (VL-EPMe-30) BIOS Reference Manual 109 Advanced Menu Advanced  Thermal Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Setup Warning: |------------------------| | Setting items on this screen to incorrect | | | values may cause system to malfunction! | | | | | | | | | OS Selection [Linux] | | | | | | > VersaLogic Features | | | > CPU Configuration | | | > Uncore Configuration | | | > South Cluster Configuration | | | > Security Configuration | | | > Thermal | | | > SMBIOS Event Log | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit This is the top level screen for the Thermal sub-menu. Bengal (VL-EPMe-30) BIOS Reference Manual 110 Advanced Menu Advanced  Thermal  Critical Trip Point Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Thermal | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Local Temperature [30 C ] | This value controls | | Remote Temperature [36.5 C ] | the temperature of | | CPU DTS Temperature [36 C ] | the ACPI Critical | | | Trip Point - the | | Thermal Configuration Parameters | point in which the OS | | Critical Trip Point [110 C] | will shut the system | | Passive Trip Point [105 C] | off. | | Active Trip Point [55 C] | | | Start Fan with Cold CPU [Disable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit 15 C 23 C 31 C 39 C 47 C 55 C 63 C Options 71 C 79 C 85 C 87 C 90 C 100 C 105 C 110 C (default) This screen also provides temperature information (local, remote, and CPU digital thermal sensor). Bengal (VL-EPMe-30) BIOS Reference Manual 111 Advanced Menu Advanced  Thermal  Passive Trip Point Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Thermal | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | Local Temperature [30 C ] | This value controls | | Remote Temperature [36.625 C ] | the temperature of | | CPU DTS Temperature [36 C ] | the ACPI Passive Trip | | | Point - the point in | | Thermal Configuration Parameters | which the OS will | | Critical Trip Point [110 C] | begin throttling the | | Passive Trip Point [105 C] | processor. | | Active Trip Point [55 C] | | | Start Fan with Cold CPU [Disable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit 15 C 23 C 31 C 39 C 47 C 55 C 63 C Options 71 C 79 C 85 C 87 C 90 C 95 C 100 C 105 C (default) 110 C This screen also provides temperature information (local, remote, and CPU digital thermal sensor). Bengal (VL-EPMe-30) BIOS Reference Manual 112 Advanced Menu Advanced  Thermal  Active Trip Point Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Thermal | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | Local Temperature [30.25 C ] | This value controls | | Remote Temperature [36.75 C ] | the temperature of | | CPU DTS Temperature [36 C ] | the ACPI Active Trip | | | Point - the point in | | Thermal Configuration Parameters | which the CPU fan | | Critical Trip Point [110 C] | comes on. | | Passive Trip Point [105 C] | | | Active Trip Point [55 C] | | | Start Fan with Cold CPU [Disable] | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Fan always on Fan always off 15 C 39 C 47 C 55 C (default) 63 C Options 71 C 79 C 85 C 87 C 90 C 95 C 100 C 105 C 110 C This screen also provides temperature information (local, remote, and CPU digital thermal sensor). Bengal (VL-EPMe-30) BIOS Reference Manual 113 Advanced Menu Advanced  Thermal  Start Fan With Cold CPU Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | Thermal | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | Local Temperature [30.25 C ] | If enabled, the CPU | | Remote Temperature [36.75 C ] | fan will turn on at | | CPU DTS Temperature [36 C ] | boot even when cold | | | (< 10 C). | | Thermal Configuration Parameters | | | Critical Trip Point [110 C] | Warning: Enable when | | Passive Trip Point [105 C] | large temperature | | Active Trip Point [55 C] | swings are expected | | Start Fan with Cold CPU [Disable] | and no ACPI OS is in | | | use. | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable (default) Enable This screen also provides temperature information (local, remote, and CPU digital thermal sensor). Bengal (VL-EPMe-30) BIOS Reference Manual 114 Advanced Menu Advanced  SMBIOS Event Log Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Setup Warning: |------------------------| | Setting items on this screen to incorrect | | | values may cause system to malfunction! | Manage SMBIOS Event | | | Log. | | | | | OS Selection [Linux] | | | | | | > VersaLogic Features | | | > CPU Configuration | | | > Uncore Configuration | | | > South Cluster Configuration | | | > Security Configuration | | | > Thermal | | | > SMBIOS Event Log | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit This is the top level screen for the SMBIOS Event Log sub-menu. Bengal (VL-EPMe-30) BIOS Reference Manual 115 Advanced Menu Advanced  SMBIOS Event Log  Event Log Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | SMBIOS Event Log | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Event Log Validity Valid | View SMBIOS event log. | | Event Log Capacity Space Available | | | | | | Event Log [Enabled] | | | > View SMBIOS event log | | | | | | Mark SMBIOS events as read [Enter] | | | Clears SMBIOS events [Enter] | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disable Enable (default) This screen also provides information about the event log’s validity and capacity. Bengal (VL-EPMe-30) BIOS Reference Manual 116 Advanced Menu Advanced  SMBIOS Event Log  Mark SMBIOS Events As Read Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | SMBIOS Event Log | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Event Log Validity Valid | Mark SMBIOS events as | | Event Log Capacity Space Available | read. Marked SMBIOS | | | events won't be | | Event Log [Enabled] | displayed. | | > View SMBIOS event log | | | | | | Mark SMBIOS events as read [Enter] | | | Clears SMBIOS events [Enter] | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Press to mark SMBIOS events as read. This screen also provides information about the event log’s validity and capacity. Bengal (VL-EPMe-30) BIOS Reference Manual 117 Advanced Menu Advanced  SMBIOS Event Log  Clear SMBIOS Events Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | SMBIOS Event Log | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Event Log Validity Valid | Clears SMBIOS events. | | Event Log Capacity Space Available | | | | | | Event Log [Enabled] | | | > View SMBIOS event log | | | | | | Mark SMBIOS events as read [Enter] | | | Clears SMBIOS events [Enter] | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Press to clear SMBIOS events. This screen also provides information about the event log’s validity and capacity. Bengal (VL-EPMe-30) BIOS Reference Manual 118 Security Menu 4 The Security menu enables you to:     Activate Secure Boot options Set and clear supervisor passwords Set and clear user passwords Configure the Trusted Platform Module (TPM) Top-level view of Security menu screen: Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Secure Boot Activation [Disabled] ^|------------------------| | > Secure Boot Configuration *| | | Supervisor Password is: Cleared *| Set or clear the | | User Password is: Cleared *| Supervisor account's | | *| password. | | Set Supervisor Password [Enter] *| | | Supervisor Hint String [ ] *| | | *| | | Set User Password [Enter] *| | | User Hint String [ ] *| | | *| | | Min. password length [ 1] *| | | *| | | Authenticate User on Boot [Disabled] +| | | +| | | HDD Security Status +| | | No HDD detected v| | | | | | Trusted Platform Module (TPM) | | | TPM Support [Enabled] | | | TPM Configuration | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Bengal (VL-EPMe-30) BIOS Reference Manual 119 Security Menu Security  Set Supervisor Password Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Secure Boot Activation [Disabled] ^|------------------------| | > Secure Boot Configuration *| | | Supervisor Password is: Cleared *| Set or clear the | | User Password is: Cleared *| Supervisor account's | | *| password. | | Set Superv/--------------------------------------------------\ | | Supervisor| Set Supervisor Password | | | |--------------------------------------------------| | | Set User P| Enter New Password [ ] | | | User Hint | Confirm New Password [ ] | | | \--------------------------------------------------/ | | Min. passwo | | *| | | Authenticate User on Boot [Disabled] +| | | +| | | HDD Security Status +| | | No HDD detected v| | | | | | Trusted Platform Module (TPM) | | | TPM Support [Enabled] | | | TPM Configuration | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit 1. Type the supervisor password 2. Confirm the supervisor password Bengal (VL-EPMe-30) BIOS Reference Manual 120 Security Menu Security  Supervisor Hint String Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Secure Boot Activation [Disabled] ^|------------------------| | > Secure Boot Configuration *| | | Supervisor Password is: Cleared *| Press Enter to type | | User Password is: Cleared *| Supervisor Hint | | *| String. | | Set Supervisor Password [Enter] *| | | Supervisor Hint String [ ] *| | | *| | | Set User Password [Enter] *| | | User Hint String [ ] *| | | *| | | Min. password length [ 1] *| | | *| | | Authenticate User on Boot [Disabled] +| | | +| | | HDD Security Status +| | | No HDD detected v| | | | | | Trusted Platform Module (TPM) | | | TPM Support [Enabled] | | | TPM Configuration | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Press to type the supervisor password hint string. Bengal (VL-EPMe-30) BIOS Reference Manual 121 Security Menu Security  Set User Password Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Secure Boot Activation [Disabled] ^|------------------------| | > Secure Boot Configuration *| | | Supervisor Password is: Cleared *| Set or clear the | | User Password is: Cleared *| Supervisor account's | | *| password. | | Set Superv/--------------------------------------------------\ | | Supervisor| Set User Password | | | |--------------------------------------------------| | | Set User P| Enter New Password [ ] | | | User Hint | Confirm New Password [ ] | | | \--------------------------------------------------/ | | Min. passwo | | *| | | Authenticate User on Boot [Disabled] +| | | +| | | HDD Security Status +| | | No HDD detected v| | | | | | Trusted Platform Module (TPM) | | | TPM Support [Enabled] | | | TPM Configuration | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit 1. Type the user password 2. Confirm the user password Bengal (VL-EPMe-30) BIOS Reference Manual 122 Security Menu Security  User Hint String Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Secure Boot Activation [Disabled] ^|------------------------| | > Secure Boot Configuration *| | | Supervisor Password is: Cleared *| Press Enter to type | | User Password is: Cleared *| Supervisor Hint | | *| String. | | Set Supervisor Password [Enter] *| | | Supervisor Hint String [ ] *| | | *| | | Set User Password [Enter] *| | | User Hint String [ ] *| | | *| | | Min. password length [ 1] *| | | *| | | Authenticate User on Boot [Disabled] +| | | +| | | HDD Security Status +| | | No HDD detected v| | | | | | Trusted Platform Module (TPM) | | | TPM Support [Enabled] | | | TPM Configuration | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Press to type the user password hint string. Bengal (VL-EPMe-30) BIOS Reference Manual 123 Security Menu Security  Min. Password Length Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | > Secure Boot Configuration ^|------------------------| | Supervisor Password is: Cleared +| | | User Password is: Cleared *| Set the minimum | | *| number of characters | | Set Supervisor Password [Enter] *| for password (1-20). | | Supervisor Hint String [ ] *| | | *| | | Set User Password [Enter] *| | | User Hint String [ ] *| | | *| | | Min. password length [ 1] *| | | *| | | Authenticate User on Boot [Disabled] *| | | *| | | HDD Security Status +| | | No HDD detected +| | | v| | | | | | Trusted Platform Module (TPM) | | | TPM Support [Enabled] | | | TPM Configuration | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Enter the minimum number of characters for passwords. Range is 1 to 20. Bengal (VL-EPMe-30) BIOS Reference Manual 124 Security Menu Security  TPM Support Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | > Secure Boot Configuration ^|------------------------| | Supervisor Password is: Cleared +| | | User Password is: Cleared *| This is used to decide | | *| whether TPM support | | Set Supervisor Password [Enter] *| should be enabled or | | Supervisor Hint String [ ] *| disabled. | | *| | | Set User Password [Enter] *| | | User Hint String [ ] *| | | *| | | Min. password length [ 1] *| | | *| | | Authenticate User on Boot [Disabled] *| | | *| | | HDD Security Status +| | | No HDD detected +| | | v| | | | | | Trusted Platform Module (TPM) | | | TPM Support [Enabled] | | | TPM Configuration | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled Disables TPM configuration options Enabled (default) Enables TPM configuration options Bengal (VL-EPMe-30) BIOS Reference Manual 125 Security Menu Security  TPM Configuration Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | TPM Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Current TPM State [Enabled and Activated] | Enact TPM Action. | | TPM Action [No Change] | Note: Most TPM | | Omit Boot Measurements [Disabled] | actions require TPM | | | to be Enabled to take | | | effect. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Bengal (VL-EPMe-30) BIOS Reference Manual 126 Security Menu Security  TPM Configuration  Current TPM State Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | TPM Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Current TPM State [Enabled and Activated] | Enact TPM Action. | | TPM Action [No Change] | Note: Most TPM | | Omit Boot Measurements [Disabled] | actions require TPM | | | to be Enabled to take | | | effect. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit This screen displays the current state of the TPM. Bengal (VL-EPMe-30) BIOS Reference Manual 127 Security Menu Security  TPM Configuration  TPM Action Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | TPM Configuration | Item Specific Help | |-----------------------------------------------------|------------------------| | | | | Current TPM State [Enabled and Activated] | Enact TPM Action. | | TPM Action [No Change] | Note: Most TPM | | Omit Boot Measurements [Disabled] | actions require TPM | | | to be Enabled to take | | | effect. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit No change (default) Enable Disable Activate Deactivate Clear Enable and Activate Disable and Deactivate Set Owner Install, with state=True Options Set Owner Install, with state=False Enable, Activate, and Set Owner Install with state=True Disable, Deactivate, and Set Owner Install with state=False Clear, Enable, and Activate Require PP for provisioning Do not require PP for provisioning Require PP for clear Do not require PP for clear Enable, Activate, and Clear Enable, Activate, Clear, Enable, and Activate Bengal (VL-EPMe-30) BIOS Reference Manual 128 Security Menu Security  TPM Configuration  Omit Boot Measurements Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | TPM Configuration | Item Specific Help | |-----------------------------------------------------+------------------------| | | | | Current TPM State [Enabled and Activated] | Enabling this option | | TPM Action [No Change] | causes the system to | | Omit Boot Measurements [Disabled] | omit recording boot | | | device attempts in | | | PCR[4]. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Options Disabled (default) Boot device attempts are recorded in PCR[4] Enabled Causes the system to omit recording boot device attempts in PCR[4] Bengal (VL-EPMe-30) BIOS Reference Manual 129 Boot Menu 5 The Boot menu enables you to set the priority of boot devices. Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Boot Priority Order |------------------------| | 1. USB CD: | | | 2. ATAPI CD: | Keys used to view or | | 3. USB HDD: | configure devices: ^ | | 4. ATA HDD0: | and v arrows Select a | | 5. ATA HDD1: | device. '+' and '-' | | 6. USB FDD: | move the device up or | | 7. Internal Shell | down. 'Shift + 1' | | 8. PCI LAN: | enables or disables a | | | device. 'Del' deletes | | | an unprotected device. | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit or Options or Selects a device from the list Moves a selected device up or down the list Enables or disables a device Deletes an unprotected device Bengal (VL-EPMe-30) BIOS Reference Manual 130 Interfaces and Connectors If you have updated the firmware in the board’s I210 Ethernet controllers, the PCI LAN entry will include options for network boot, as shown below. The example below shows both LAN ports (NIC1/Ethernet Port 0 and NIC2/Ethernet Port 1, respectively) enabled for network boot. Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Boot Priority Order |------------------------| | 1. USB CD: | | | 2. ATAPI CD: | Keys used to view or | | 3. USB HDD: | configure devices: ^ | | 4. ATA HDD0: | and v arrows Select a | | 5. ATA HDD1: | device. '+' and '-' | | 6. USB FDD: | move the device up or | | 7. Internal Shell | down. 'Shift + 1' | | enables or disables a | | 8. PCI LAN: | IBA GE Slot 0800 v1578 | device. 'Del' deletes | | IBA GE Slot 0900 v1578 | an unprotected device. | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ Change Values F9 Setup Defaults F1 Help ↑↓ Select Item +/Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit . Bengal (VL-EPMe-30) BIOS Reference Manual 131 Exit Menu 6 The Exit menu provides options for the following:  Exiting the BIOS Setup utility with our without saving changes  Loading or re-loading default values  Saving or discarding changes Phoenix SecureCore Technology Setup Main Advanced Security Boot Exit /-----------------------------------------------------+------------------------\ | | Item Specific Help | | Exit Saving Changes |------------------------| | Exit Discarding Changes | | | Load Setup Defaults | Equal to F10, save | | Load Optimized Defaults | all changes of all | | Discard Changes | menus, then exit | | Save Changes | setup configure | | | driver. Finally | | | resets the system | | | automatically. | | | | | | | | | | | | | | | | | | | | | | | | | | | | \-----------------------------------------------------+------------------------/ F1 Help ↑↓ Select Item +/Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit Exit Saving Changes Save all changes in all menus, exit setup, and perform a reset; same as Exit Discarding Changes Exit Setup without saving changes; same as Load Setup Defaults Load standard default values; same as Load Optimized Load settings for optimized boot time and system performance Defaults Discard Changes Load original values of this boot time (not the default values). Save Changes Save all changes in all menus, but do not reset system. *** End of document *** Bengal (VL-EPMe-30) BIOS Reference Manual 132