DK179

DK170 LCD Digital Panel Meters Specifications Installation and Operating Instructions Flat Pack 3½ Digit LCD FEATURES }} }} }} }} SPECIFICATIONS DISPLAY Digits: Type: Digit Height: Polarity Ind.: Annunciators: Decimal Points: Overrange: INPUTS Ranges: Configuration: Protection: Impedance: Bias Current: PERFORMANCE Accuracy: Conversion Rate: Normal Mode Rejection: Common Mode Range: Common Mode Rej.: Zero Adjustment: Warmup: Temperature Coeff.: ENVIRONMENT Operating Range: Storage Range: Relative Humidity: POWER SUPPLY 9V powered: +5V and -5V DC: +5V DC: MOUNTING Dimensions: Panel Cutout: Weight: CONNECTION Low-cost Ultra compact flat design Less than .25” deep 3½ digits with high-contrast LCD ORDERING INFO 3 ½ digits (±1999 counts) 0.5" (13mm) 7 segment reflective LCD .50" (12.7mm) automatic, “-” displayed “LoBat” when power 1999 ±200.0mV, ±2.000V, ±20.00V DC true differential input and reference 250 VDC or 150 V RMS continuous, 300 V intermittent max >100 MΩ on ± 200mV ; (>1 MΩ on 2V & 20V range) 1 pA typical, 10 pA max 15 pads PART NUMBER....................... METER INPUT ......................... METER POWER DK171........................................ 200mV.................................................. 9V DK172............................................2V...................................................... 9V DK173 ..........................................20V..................................................... 9V 13-pins PART NUMBER METER INPUT DK174 ....................................... 200mV.................................................. 9V DK175 ...........................................2V...................................................... 9V DK176 ..........................................20V..................................................... 9V ±(0.1% fs + 2 count) with +5 and ±5V power ±(0.1% rgd + 1 count) with 9 V power 2.5 per second >30 dB @ 60 Hz ±1 VDC max >86 dB automatic 10 min typical ±100 ppm per °C typical DK177 ....................................... 200mV........................................... +5VDC DK178 ...........................................2V............................................... +5VDC DK179 ..........................................20V.............................................. +5VDC ACCESSORIES B-1B................................................................................ Bezel Mounting Kit J1C13....................................................... 13 Pin Connector / Wire Assembly PW2-5........................................ Regulated 120V AC to 5V DC Power Supply PW2-12.................................... Regulated 120V AC to 12V DC Power Supply CVC...............................................................................................Calibrator 0 to 50 °C -10 to 60 °C 0 to 95% non-condensing 9 V isolated, 7.2-12 V at 150 µA ±5 V ±5% at 150 µA 5 V ±5% at 3 mA panel hole mounting, standard bezel mount (optional) 2.37 x 1.50 x .32 1.89 x .66 0.9 oz (25 g) 13 pins, 0.025" square - pin 3 missing 15 solder pads C-TON Industries METER POWER • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • email: info@ctonindustries.com DK170 LCD Digital Panel Meters Specifications Installation and Operating Instructions Flat Pack 3½ Digit LCD DIMENSIONS 13 PINS 15 PADS BEZEL MOUNTING C-TON Industries • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • email: info@ctonindustries.com