DK612

DK610 LED Digital Panel Meters Specifications Installation and Operating Instructions 3½ Digit LED Display for voltage inputs FEATURES }} }} }} }} }} Display hold function standard 3½ digits with 0.56” RED or GREEN LED 10 wire harness included Gasket and clamp provided for NEMA4, NEMA12 & IP66 applications User-selectable decimal points SPECIFICATIONS ORDERING INFO DISPLAY PART NUMBER Digits: Type: Digit Height: Polarity: Decimal Point: Overrange: 3 ½ (±1999 count) 7- segment LED (red or green) .56 in (14.2 mm) automatic “-” for neg input 3 position selectable three lower order digits blank for inputs >1999 & < -1999 SIGNAL INPUTS DK612 ....................................... GREEN ............................................. 2VDC DK613........................................ GREEN ........................................... 20VDC DK614.......................................... RED ....................................... 200mV DC DK615.......................................... RED ..............................................2V DC DK616.......................................... RED ............................................20V DC ACCESSORIES C10-5................................................5" - 10 Pin Connector / Wire Assembly J1C10..............................................12" - 10 Pin Connector / Wire Assembly PW2-5........................................ Regulated 120V AC to 5V DC Power Supply PW1.0..........................................................24V AC to adjustable DC output CPW1.5B......................................................24V AC to adjustable DC output CVC...............................................................................................Calibrator Sampling Rate: 3.3 readings / seconds Accuracy: ± (0.1% + 2 counts) typical ±(0.2% + 2 counts) max Warmup, typical: 10 min Temperature Drift, typical: 100 ppm / °C POWER SUPPLY Supply Voltage: Supply Current, typical: +5 VDC ±5% 200 mA ENVIRONMENT Operating Temperature: 0 to 50°C Storage Temperature: -10 to 60°C Relative Humidity: 0 to 95% non-condensing PHYSICAL Package Style: Dimensions: Panel Cutout: Weight: Connector: CONNECTION: NEMA bezel mount 3.09 x 1.5 x .66" 2.83 x 1.26" 1.0 oz J1C-10 or C10-5 optional 10 pin C-TON Industries METER POWER DK611 ....................................... GREEN ..................................... 200mV DC Configuration: bipolar, differential Full-Scale Input: ±200 mV, ±2 V, ±20 V Input Offset Adjustment: auto zero Input Impedance: >100 MΩ (±200 mV),‑1 MΩ (other ranges) Common Mode Range: ±1 VDC Common Mode Rejection: >86 dB Protection: ±350 VDC (±100 VDC for 200 mV range) Input Bias Current: 1 pA typical, 100 pA max Control Inputs: decimal point select, hold, span adjust trimpot PERFORMANCE METER COLOR • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • email: info@ctonindustries.com LED Digital Panel Meters Specifications Installation and Operating Instructions DK610 3½ Digit LED Display for voltage inputs DIMENSIONS 1 10 WIRING Pin No. Pin Name Description 1 V+ +5V power supply 2 GND Power supply ground 3 DP COM Decimal point return 4 DP1 1XX.X (connect to DP COM to turn on) 5 DP2 1X.XX (connect to DP COM to turn on) 6 DP3 1.XXX (connect to DP COM to turn on) 7 INPUT(+) Positive input signal 8 INPUT(-) Negative input signal 9 NC No connection required 10 HOLD Hold last display C-TON Industries • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • email: info@ctonindustries.com