NVH1D1C1CP2S

JOYSTICKS N T- JS 06 18 V- NV series Compact 5-way navigation thumb controls • switching technology DISTINCTIVE FEATURES Tactile feedback in all directions & optional pushbutton Compact and low profile behind panel Shock, vibration & salt spray resistant 1 million lifecycles Sealed to IP69K ENVIRONMENTAL SPECIFICATIONS • Front Panel Sealing : IP69K according to DIN 40050-9, IP67 according to IEC 60529 • Shock Resistance per IEC 60068-2-27 : 3 sinusoidal impulse 300m/s² 18ms on 3 axis • Vibrations (random, 3 axis) per IEC 60068-2-64 : 10-350Hz • Vibrations (sinus) per IEC 60068-2-6 : 10-200Hz / 20m/s² ; dwell period 30 minutes • Salt Spray : 96 h per IEC 60068-2-11/KA • Damp Heat per IEC 68-2-78 : 40 °C (104 °F) 93% HR - 10 days • Cold and Dry Heat, Temperature Shock per IEC 68-2-14/Na : -40°C to +85°C (-40 °F to +185 °F)- 10 cycles • Operating Temperature: -40 °C to +65 °C (-40 °F to +149 °F) ELECTRICAL SPECIFICATIONS • Electrical Function : 4 or 5 momentary NO • Max. Current/Voltage Rating with Resistive Load : 50 mA 12 VDC • Electrical Life at Full Load : 1,000,000 cycles per direction 1,000,000 cycles for validation • Output : MOLEX 6 pin connector (Ref: 53398-0671) Mating connector Molex 51021-0600 The company reserves the right to change specifications without notice. 1 JOYSTICKS NV series Compact 5-way navigation thumb controls • switching technology CNVDT1 échelle 1 PANEL CUT-OUT MECHANICAL SPECIFICATIONS • Expected Life : 1 million cycles per direction Ø (.6 16 37 .20 DI A) • Pushbutton Travel : 1.5 mm 15,3 [.602] West Ø 20 [.787] South • Torque : 2 Nm min. applied to nut 0.3 (.011) • Mechanical Strength : The switch can withstand a force of 100 N applied in any directions D West • Panel Thickness : 1 to 10 mm (.0039 in to .39 in) East GENERAL TOLERANCE: • Operating force : (customizable on request) Direction : 4 N ±1 N 13,6 [.535] Validation : 11 N ±2 N 19 [.748] North 15.50 (.610) • Angular Travel : 12° 12° 16 [.630] • Mass/Weight : 17.5 g ±2 g ( 0.6 oz ±0.07 oz) CONNECTIONS 12° CONNECTOR OUTPUT - REAR VIEW East Ø16 x 1.00 IS [.630 x 1.00 SI) MATERIALS validation travel 1,5 • Sealing Gasket : Elastomeric [.059] 1 • Case : Brass, black chrome plated PIN 6 Common PIN 2 North PIN 5 West Directions • Output wires (flying lead terminals) : AWG24, section 0.23 mm², UL 1213 (military grade) PIN 4 Validation Wires 500mm (19.68") AWG24 PIN 3 South ECHELLE 2:1 • Nut : Brass, black chrome plated PIN 1 East C • Lever : Steel PIN 4 for validation version only APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. contacts North East South West - - - - - - FLYING LEADS OUTPUT Red wire EAST Yellow wire NORTH échelle 1 Blue wire SOUTH Green wire VALIDATION B - - - - - - - - - - Black wire Common CONSTRUCTION MATERIALS CASE ACTUATOR TERMINALS LEVER ELECTRICAL SPECIFICATIONS Electrical function Max. current/voltage rating with resistive load Electrical Life at full load MECHANICALS SPECIFICATIONS Angular travel Panel tickness Mechanical life ENVIRONMENTAL SPECIFICATIONS SPECIFI Nor Sou 4 directions AP 55,av E.HERRIOT BP 1 8 Tél.05.63.93.14.98 - Téléco DA REF: Panel Cut-out, Front pan West 16.2 Operating temperature Front sealing MATERIAL: VOLUME : 4411.441mm³ SURFACE: 10256.842mm² TREATMENT: FINISH: Scale: 3:1 2 CNVDT4 White wire WEST FORM ACTUATOR Replace the FIRST blank digit with the following code 1 2 - COLOR ACTUATOR Replace the SECOND blank digit with the following color code P1 = Blue P2 = Black P3 = Green P4 = Grey P5 = Yellow P6 = Red P7 = White P8 = Orange PM= Desert Tan - PATENT PENDING - - - - - Direction available see table for contact configurations • Actuator : ABS Compact 5-way navigation thumb controls • switching technology BUILD YOUR PART NUMBER NV H ACTUATOR STYLES SERIES 1 Castle 2 Conical 3 Lever PANEL MOUNT D Drop-in LIMITER ACTUATOR COLORS C Cross P1 Blue V 1 axis, vertical P2 Black P3 Green P4 Grey P5 Yellow P6 Red P7 White P9 Orange PM Desert tan CONTACT 1 50 mA OUTPUT PUSHBUTTON C Connector 0 No F Flying leads 500 mm 1 Yes FORCE S Standard ABOUT THIS SERIES Notice : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : Standard hardware supplied : 1 hex nut 19 mm across flats 3 JOYSTICKS NV series Compact 5-way navigation thumb controls • switching technology 4 DIRECTIONS 13.10 (.515) Connector output 17.50 (.688) 3.90 (.153) East East Ø (.7 20 87 .00 DI A) FOR DIRECTION AVAILABLE NVH•D1C0 Flying lead output North South NVH•D1F0 West 3.00 (.118) Ø16.00 (.630DIA) 4 DIRECTIONS + PUSHBUTTON Ø16.00x1.00 SI (.630DIAx1.00 IS) West FOR DIRECTION AVAILABLE 13.10 (.515) East 17.50 (.688) 3.90 (.153) East CNVDT2 Connector output échelle 1 NVH•D1C1 North Flying lead output South NVH•D1F1 West Ø16.00 (.630DIA) Ø16.00x1.00 SI (.630DIAx1.00 IS) échelle 1 In the above part numbers, replace • with one the following codes. 4 3.00 (.118) CNVDT3 ACTUATOR STYLE 1 Castle 2 Conical Ø (.7 20 87 .00 DI A) JOYSTICKS NV series 3 Lever West