70507529

| | www.crouzet-switches.com || 1 | | microswitches | | 07/2016 Miniature microswitches - SEALED V3S - 83169 › High precision flexible leaf snap-action mechanism › Operation without balance-point, even at extremely slow actuating speed › Excellent resistance to harsh environments - IP67/IP69 protection › High resistance to shock and vibration - Very long life › Operating temperature -40 °C up to 130 °C › Wire lead or cable output › Tight switching hysteresis versions: 0.07 mm max differential travel › Ratings from 1 mA 4 Vc to 8 A 250 Va and 1/4 HP 125-250 Va › Wide choice of actuators on 4 possible fixing positions (pre-assembled or retrofittable) Main specifications Standard 831690 Function Connections I (changeover) D0.5 I (changeover) G0.5 I (changeover) C0.5 I (changeover) Y0.5 I (changeover) D - G - C -Y * R (normally closed) D - G - C -Y * C (normally open) D - G - C -Y * * wire length or cable length on demand Electrical characteristics Rating nominal / 250 V AC (A) Rating thermal / 250 V AC (A) Mechanical characteristics Maximum operating force (N) Min. Release force (N) Maximum total travel force (N) Max. Allowable overtravel force (N) Rest position max. (mm) Operating position (mm) Maximum differential travel (mm) Min. overtravel (mm) Ambient operating temperature-wires (°C) Ambient operating temperature-cable (°C) Mechanical life (operations) Contact gap (mm) Weight (g) Reduced differential travel 831694 Dual-current 831698 Dual-current Reduced differential travel 831699 83169002 83169001 83169015 83169046 83169405 83169404 83169406 83169442 83169802 83169801 83169803 83169820 83169905 83169904 83169906 83169913 ● ● ● ● ● ● ● ● ● ● ● ● 8 10 5 6 5** 6 5** 6 4.5 1 8 20 15.9 14.7±0.5 0.35 1 -40 ➞ +105 °C -40 ➞ +90°C 5 x 106 0.4 30 4.5 1 8 20 15.9 14.7±0.5 0.07 0.4 -40 ➞ +105 °C -40 ➞ +90 °C 5 x 106 0.4 30 4.5 1 8 20 15.9 14.7±0.5 0.35 1 -40 ➞ +105 °C -40 ➞ +90 °C 5 x 106 0.4 30 4.5 1 8 20 15.9 14.7±0.5 0.07 0.4 -40 ➞ +105 °C -40 ➞ +90 °C 5 x 106 0.4 30 Additional specifications - Case: PBT GF (UL 94-V0 / GWFI 960 °C) - Button: stainless steel - Membrane: fluorosilicone rubber - Moving blade: silver-plated beryllium copper - Contacts: silver alloy, micro-profile gold alloy on silver alloy, crossbar (dual-current) - Wire leads, cable: copper, PVC insulated - Levers: stainless steel, polyamide roller - Degree of protection: IP67/IP69 -P  rotection against electric shock : models with cable output on left are suitable for Class II equipment up to 250 V without additional protection - Recommended min actuating speed: 0.001 mm/s Product adaptations › Special levers: special shapes and lengths, flexible levers, adjustable, pinned, …. › Special leads and cables, EN 50306 halogen free versions, full wiring with custom connector › High operating temperature: +130 °C › Long overtravel variant (min 3.5 mm) with metal or plastic plunger, also suitable for lateral approach up to 30° (SP4978, SP4988) › Adjustable fixing by threaded barrel: see 83581 › Reinforced housing with metal insert and cable output for very severe conditions › Variant with plastic button for double insulation (SP4965) › Integrated varistor for extended service life on DC inductive load › cURus approved versions Standard product Product made to order Contact us | | www.crouzet-switches.com || 2 | | microswitches | | 07/2016 Principles Single break snap-action switch Changeover - SPDT (form C) Normally closed - SPST-NC (form B) 2 1 Normally open - SPST-NO (form A) 2 1 1 4 4 Curves Operating curve for type 831690 1 2 3 107 {~ Operating curve for type 831694 1 L = 5 ms R cos ϕ = 0,8 10 7 4 5 2 250V~ 250V~ 2 3 {~ L = 5 ms R cos ϕ = 0,8 1 107 4 5 12Vc 106 5 2 Operating curve for types 831698/831699 2 250V~ 250V~ 2 105 5 5 2 104 0.1 0.2 0.5 1 2 4 12Vc 250V~ 2 5 5 L = 5 ms R cos ϕ = 0,8 106 5 105 5 8 {~ 2 105 2 104 0.1 0.2 0.5 1 2 3 5 12Vc 106 5 2 5 2 104 0.1 0.2 0.5 1 2 5 5 5 B C D E F Number of cycles Resistive circuit Inductive circuit Mechanical life limit Current in Amps ** Models 831698 and 831699 are designed to operate equally well on low-current (1 mA 4 V minimum recommended) or medium-current (5 A maximum) circuits. However, a given product should only be used to switch one type of circuit during its working life. Dimensions Product 10,3 ±0,1 83169 B Total travel position Connections Y cable output on right Ø5 C cable output on left Ø5 Ø2 G wire output on left Ø2 D wire output on right max. 5*** ***Outer jacket stripping Wire characteristics: 1: black (common) 2: brown (NC) 4: blue (NO) Cross section: 1 mm2 Standard length: 0.5 m (other lengths on request) Cable characteristics: 1: black (common) 2: brown (NC) 4: grey (NO) Cross section: 3 x 0.75 or 2 x 0.75 mm2 Standard length: 0.5 m (other lengths on request) | | www.crouzet-switches.com || 3 | | microswitches | | 07/2016 Actuator mounting positions 161-type levers (clipped-on) 0,6 139-type levers (pinned) Actuators 139AX flat 139EX roller 161A flat 4,6 0,5 0,5 x 3,8 161F dummy roller 2 5,7 7 161G dummy roller 161E roller R 2,5 22 21 5,5 ,2 ,8 x7 0,5 3 0, Other shapes and dimensions: consult us | | www.crouzet-switches.com || 4 | | microswitches | | 07/2016 Actuators and mounting accessories Part numbers for standard actuators 79215740 Flat 139 AX R29.7* Actuators Fixing position Operating force - max. Release force - min. Operating position Differential travel - max. (831690/8) N N mm D 2.5 0.4 14.3±1.2 D 2.5 0.4 19.4±1.3 mm 1.2 1.2 Part numbers for standard actuators Actuators Fixing position Operating force - max. Release force - min. Operating position Differential travel max. (831690/8) Roller 139 EX R28.7* 70507524 79215742 Flat 161A R14.2 A 2.5 0.5 15.1±1.2 0.8 Roller 161E R13.6 R24.1 R25.4 B 4.5 1 15.2±0.6 0.4 A 1.4 0.25 14.5±2.4 B 2.5 0.5 15±1.2 1.6 0.8 70507528 79218651 Dummy roller 161F R22.2 Dummy roller 161G R21.8 N N mm A 1.5 0.25 19.8±2.2 B 2.6 0.5 20.2±1.1 A B 1.5 2.6 0.25 0.5 20.8±2.2 21.2±1.1 mm 1.6 0.8 1.6 70507529 C 3.5 0.6 15.2±0.9 0.6 A 2.5 0.5 20.4±1.2 B 4.5 1 20.5±0.6 A 1.4 0.25 19.7±2.4 B 2.5 0.5 20.1±1.2 C 3.5 0.6 20.3±0.9 0.8 0.4 1.6 0.8 0.6 0.8 Unless mentioned specifically, 161-type levers are supplied unassembled. For factory mounting, specify mounting position A, B or C. * 139-type levers are factory mounted. Note: We recommend greasing the switch button lightly when fitting actuators. V3S-83169 microswitches with referenced actuators Actuators 831690 I D0.5 831698 I D0.5 161A R14.2 79215740 Pos A Pos B 83169003 83169004 ● ● 161A R25.4 Pos A 83169005 ● 70507524 Pos B 83169006 ● 161E R13.6 Pos C 83169007 ● 79215742 Pos A Pos B 83169008 83169009 ● 83169819 139EX R28.7 161E R24.1 Pos A 83169010 ● 70507529 Pos B 83169011 ● Pos C 83169012 ● Installation recommendations See “Basic technical concepts” How to order Use the 8 digit part numbers when they are defined Other cases, precise: Type of microswitch - Function - Connection - UL approval* - Actuator* - Fixing position* - Adaptation* * if needed Example: 831690 R D1.50 UL 161E R24.1 B Standard product Product made to order Contact us Pos D 83169017 83169818 | | www.crouzet-switches.com || 5 | | microswitches | | 07/2016 Examples of special adaptations Long overtravel variant with plastic plunger and reinforced housing (SP4988) Full wiring with custom connector Long overtravel variant with metal plunger (SP4978) Adjustable fixing by threaded barrel and telescopic plunger: see 83581 Double insulation model with plastic plunger (SP4965)