ELS2A

Data Sheet ELS2A AC Current Clamp Accessory The ELS2A is for use with all models of clamp meters. It enables the user of a clamp meter to measure the current on a 2-wire or 3-wire power cord to 15A without having to cut off the plug and separate the conductors, or opening electrical boxes on 120V lines. The ELS2A also includes a 10X current multiplier loop for increased sensitivity and accuracy of low-current measurements. ■■ Measures current without splitting AC line cords ■■ Two measurement loops for increased sensitivity, X1 and X10 No hassle warranty ■■ Built-in No waiting. ■■ Rated No shipping charges. ■■ One-year Our commitment to high-quality products and customer service is demonstrated by our industry exclusive “No Hassle” warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. (note: $500 MSLP limit) voltage measurement points to check for voltage sags and surges for 120V, 15Amps warranty Amprobe® Test Tools website: www.Amprobe.com email: info@amprobe.com Everett, WA 98203 tel: 877-AMPROBE Amprobe® Test Tools Europe In den Engematten 14 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 Amprobe® Test Tools ©2007 Amprobe Test Tools. All rights reserved. 9/2007 2123452 D-US-N Rev C www.Amprobe.com