RFI
RFI
Power
Power
Line
Line
Filters
Filters
Terminal
Blocks
Family
FamilyofofProducts
Products
> RFI
RFI
FIlters
FIlters
>>
> Filtered
Filtered
Power
Power
Entry
Entry
>>
> Custom
Custom
Filters
Filters
>>
> Terminal
Terminal
Blocks
Blocks
>>
> Custom
Custom
Terminal
Terminal
Blocks
Blocks
>>
> Liquid
Liquid
Level
Level
Controllers
Controllers
>>
> PCB
PCB
Mount
Mount
Blocks
Blocks
>>
> DIN
DIN
Rail
Rail
RFI POWER LINE FILTERS
>>
R5 4.12
2400
2400
S. 43rd.
S. 43rd.
St. St.
Milwaukee,
Milwaukee,
WI WI
53219
53219
1-800-657-0853
1-800-657-0853
www.curtisind.com
www.curtisind.com
Innovative
Innovative
Innovative
Engineering
Engineering
Engineering
Solutions
Solutions
Solutions
Contents
Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SINGLE PHASE FILTERS
]
General Purpose
F1100/F1150/F1199 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
F1200/F1250/F1299 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
F1300/F1350/F1399 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
F1900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
High Performance
F1400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
F1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
F1600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
F1700/F1799 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
F1760/F1770/F1780 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
F2800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Wide Band
F5100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
F5200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
F5500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
F5600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
F5700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
F5900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Single Phase Filter Cutouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
]
General Purpose Filtered Modules
POWER ENTRY MODULES
F2199/F2200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
F2300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
F2400/F2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
F2600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
F2700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Combination
FPE7/FPE8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
FPE1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Power Entry Module Cutouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
THREE-PHASE FILTERS
]
F3480/F3600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
DC FILTERS
]
FD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
General Purpose
FD00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
FD02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
High Performance
FD1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
FD2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
FD3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
]
General Purpose Filtered Modules
MEDICAL FILTERS
F3099 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
F3000/3100/F3200/F3400/F3500 . . . . . . . . . . . . . . . . . . . . . . . . . 73
F3300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Combination
FPM7/FPM8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
FPM1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
TECHNICAL CONSIDERATIONS
]
Understanding Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Technical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Conducted Emissions Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Custom Filter Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
1
F1100/F1150
Curtis Industries Filter
RFI Filters
Selection Guide
F1150
F1200/1299
SINGLE PHASE
SINGLE PHASE
F1250
POWER ENTRY
0 .5
1 .0
•
•
0 .25
0 .40
•
•
Solder Term.
•
Screw
••
•
•
P.C. Term
•
•
Switch
••
1 .0
0 .40
Volt Select
••
0 .5
0 .25
I.E.C.
•
•
•
4
•
•
4
•
•
•
7
•
•
•
•
7
••
0 .5
1 .0
•
•
•
•
•
11
•••
••
0 .25
0 .40
•
•
•
•
•
11
F1900
•
•
0 .25
0 .40
•
15
F1400
•••••
••••
0 .25
0 .40
F1500
••••
•••
0 .25
0 .40
F1600
•••••
•••
0 .25
0 .40
•
•
•
•
•
•
•
•
•
•
•
•
••
••••
0 .5
1 .0
•
•
••••
••••
0 .5
1 .0
•
•
F2800
•••••
•••••
0 .25
0 .50
•
•
F5100
••
••
0 .25
0 .50
F1700/1799
F1760/1700/1780
••
••
0 .25
0 .50
F5500
••••
••••
0 .25
0 .50
•
F5600
•••••
••••
0 .50
1 .20
•
F5700
••••
•••••
0 .50
1 .20
•
F5900
•••••
••••
0 .50
1 .20
•
•
•
0 .25
0 .40
•
•••
••
0 .25
0 .40
F2300
•
16
•
18
•
20
•
•
22
•
•
24
•
26
•
28
•
•
F5200
•
•
30
•
32
•
34
•
36
•
38
•
•
44
•
•
•
45
•
F2400/2500
•
•
0 .25
0 .40
•
F2600
•
•
0 .25
0 .40
•
F2700
•••••
•••••
0 .25
0 .40
•
•
•
•
•
•
46
•
48
•
•
50
•
52
•
•
52
•
•
56
•
•
FPE7
•
•
0 .25
0 .40
•
•
•
•
•
0 .25
0 .40
•
•
•
FPE1
••
••
0 .25
0 .40
•
•
•
••••
••••
•
•
•
FPE8
•
•
•
•
•
60
FD00
67
FD02
68
FD1
69
(See Section on DC filters for more information)
FD2
70
FD3
70
0 .002
0 .005
•
•
•
•
••
F3000/3100/3200/3400/3500
•
••
0 .002
0 .005
•
F3300
•
•
0 .015
0 .025
•
FPM7
•
•
0 .002
0 .005
•
•
•
FPM8
•
•
0 .002
0 .005
•
•
•
FPM1
••
••
0 .002
0 .005
•
•
•
F3099
MEDICAL
••
•
mA
@250VAC
••••
F1300/1399
F3480/F3600
DC FILTERS
THREE-PHASE
••
mA
@115VAC
Catalog
Page
Number
F1350
F2199/2200
2
Differential
Mode
Q.C.
F1100/1199
Common
Mode
Wire
Filter Series
MAXIMUM
LEAKAGE CURRENT
Fused I.E.C.
PACKAGE/TERMINATION
PERFORMANCE
RELATIVE ATTENTUATION
www .curtisind .com
Curtis Industries
A Division of Powers Holdings, Inc .
•
•
•
73
•
75
•
77
•
•
77
•
•
81
•
•
•
72
•
Specifications subject to change.
SINGLE PHASE FILTERS
]
General Performance
High Performance
SINGLE PHASE FILTERS
Wide Band
Curtis Industries
A Division of Powers Holdings, Inc .
3
F1100/F1150/F1199 RFI Filters
Features:
SINGLE PHASE FILTERS
F1100/F1150/F1199
Simplified Schematic
LI NE
General Purpose
• Most Economical Design
• Designed for General Purpose, Common Mode
Applications
• Available in Standard (F1100) and Low-Leakage (F1150)
(F1160) (F1170) (F1180) (F1190) (F1199) Models
L
G
N
Nominal
Current
Rating
1A
2A
3A
6A
10A
20A
30A
Part
Number
Termination
Line/Load
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
Frequency - MHz
.15
.50
1.0
5.0
10
30
F1100AA01
F1100BB01
QC/QC
Wire/Wire
Common
Differential
20
35
43
52
55
55
65
50
50
F1150AA01
F1150BB01
QC/QC
Wire/Wire
Common
Differential
20
30
37
50
55
50
65
50
50
F1199AA01
QC/QC
Common
Differential
32
5
45
14
45
23
43
47
43
50
40
45
F1199AA02
F1199BB02
QC/QC
Wire/Wire
Common
Differential
24
5
35
13
43
16
45
45
45
50
40
45
F1100AA03
F1100BB03
F1100PP03
QC/QC
Wire/Wire
PC/PC
Common
Differential
20
35
43
52
55
55
64
50
46
F1150AA03
F1150BB03
QC/QC
Wire/Wire
Common
Differential
20
30
37
50
55
50
64
50
46
F1199AA03
F1199BB03
QC/QC
Wire/Wire
Common
Differential
20
5
30
12
38
14
48
38
48
44
44
42
F1100AA06
F1100BB06
QC/QC
Wire/Wire
Common
Differential
10
22
2
30
5
46
51
50
57
45
49
F1150AA06
F1150BB06
QC/QC
Wire/Wire
Common
Differential
10
20
2
27
5
45
51
45
57
45
49
F1199AA06
F1199BB06
QC/QC
Wire/Wire
Common
Differential
9
5
20
12
28
14
42
33
50
42
47
42
F1100AA10
F1100BB10
QC/QC
Wire/Wire
Common
Differential
10
22
30
2
46
27
50
47
45
50
F1150AA10
F1150BB10
QC/QC
Wire/Wire
Common
Differential
10
20
27
2
45
27
45
47
45
50
F1199AA10
F1199BB10
F1199DD10
QC/QC
Wire/Wire
Screw/Screw
Common
Differential
9
5
20
12
25
14
38
33
42
42
40
42
F1100AA20
F1100DD20
QC/QC
Screw/Screw
Common
Differential
8
18
22
5
36
22
42
46
45
60
F1150AA20
F1150DD20
QC/QC
Screw/Screw
Common
Differential
8
15
20
5
32
22
38
46
45
60
F1199AA20
F1199DD20
QC/QC
Screw/Screw
Common
Differential
10
5
20
12
28
15
35
30
38
40
40
40
F1199DD30
Screw/Screw
Common
Differential
13
5
23
12
30
15
35
30
38
40
40
40
NOTE: Other combinations of terminals may be specified on special order.
4
www .curtisind .com
Curtis Industries
A Division of Powers Holdings, Inc .
Specifications subject to change.
Dimensions are shown for
reference purposes only .
Specifications:
(1, 3, 6, 10 and 20Amp) Dimensions
Amps
A
B
C
D
E
1A
2 .500
(63,5)
1 .750
(44,5)
.625
(15,8)
2 .125
(53,9)
1 .425
(362)
3A
2 .500
(63,5)
1 .750
(44,5)
.750
(19,1)
2 .125
(53,9)
1 .8
(45,8)
6A
2 .500
(63,5)
1 .750
(44,5)
.750
(19,1)
2 .125
(53,9)
1 .8
(45,8)
10A
2 .500
(63,5)
1 .750
(44,5)
1 .125
(28,5)
2 .125
(53,9)
1 .8
(45,8)
20A
2 .760
(70,6)
2 .000
(60,8)
1 .125
(28,5)
2 .375
(60,3)
2 .550
(64,8)
.188 Dia .
(4,77) 2 Holes
L
I
N
E
B
L
O
A
D
D
A
064179
72031204
(Except
F1100/F1150
20-amp)
(Except
F1100/F1150
20-amp)
.250 Q .C .
(6.4)
F1100BB/FB1150BB
(1, 3, 6 and 10Amp) Dimensions
F1100DD/F1150DD
(20Amp Only) Dimensions
.188 Dia .
(4,77) 2 Holes
2 .000
(50,8)
(5) No. 8-32
.625
Studs
(15,8)
L
I
N
E
L
O
A
D
2 .760
(70,6)
Amps
A
B
C
D
E
1A
2 .500
(63,5)
1 .750
(44,5)
.625
(15,8)
2 .125
(53,9)
.875
(22,2)
3A
2 .500
(63,5)
1 .750
(44,5)
.750
(19,1)
2 .125
(53,9)
1 .250
(31,8)
6A
2 .500
(63,5)
1 .750
(44,5)
.750
(19,1)
2 .125
(53,9)
1 .250
(31,8)
10A
2 .500
(63,5)
1 .750
(44,5)
1 .125
(28,5)
2 .125
(53,9)
1 .250
(31,8)
.188 Dia .
(4,77) 2 Holes
2 .375
(60,3)
B
2 .000
(50,8)
.625
(15,8)
1 .125
(25,5)
L
I
N
E
L
O
A
D
E
C
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
SINGLE PHASE FILTERS
E
C
E78454
General Purpose
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
1A
1A
2A
1 .5A
3A
2 .5A
6A
4A
10A
6A
20A
10A
30A
15A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
F1100/F1150
F1199
Line to Ground:
1500VAC
1500VAC
Line to Line:
1768VDC
1450VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
A: QC – Quick Connect
D: Screw
B: Wire
P: PCB Pins
Maximum Leakage Current:
Each Line to Ground
F1100
F1150
F1199
115VAC, 60Hz:
0.40mA
0.25mA
0.25mA
250VAC, 50Hz:
.75mA
0.40mA
0.45mA
Agency Approvals:
F1100AA/F1150AA
Curtis Industries
A Division of Powers Holdings, Inc .
A
D
4 .000
(101,6)
Min .
.250± .062
(6,35) Typ.
No. 18 Gauge Wire
1-800-657-0853
5
F1100/F1150/F1199 RFI Filters (continued)
SINGLE PHASE FILTERS
General Purpose
F1199AA (1, 2, 3, 6, 10 and 20Amp) Dimensions
F1199BB (2, 3, 6 and 10Amp) Dimensions
Amps
A
B
C
D
E
Amps
A
B
C
D
E
1A
2 .53
(64,3)
1 .82
(46,2)
0 .66
(16,8)
2 .126
(54,0)
2 .25
(57,2)
2A
2 .53
(64,3)
1 .82
(46,2)
0 .66
(16,8)
2 .126
(54,0)
0 .96
(24,4)
2A
2 .53
(64,3)
1 .82
(46,2)
0 .66
(16,8)
2 .126
(54,0)
2 .25
(57,2)
3A
2 .53
(64,3)
1 .82
(46,2)
0 .78
(19,8)
2 .126
(54,0)
1 .32
(33,5)
3A
2 .53
(64,3)
1 .82
(46,2)
0 .78
(19,8)
2 .126
(54,0)
2 .61
(66,3)
6A
2 .53
(64,3)
1 .82
(46,2)
0 .78
(19,8)
2 .126
(54,0)
1 .32
(33,5)
6A
2 .53
(64,3)
1 .82
(46,2)
0 .78
(19,8)
2 .126
(54,0)
2 .61
(66,3)
10A
2 .53
(64,3)
1 .82
(46,2)
1 .16
(29,5)
2 .126
(54,0)
1 .32
(33,5)
10A
2 .53
(64,3)
1 .82
(46,2)
1 .16
(29,5)
2 .126
(54,0)
2 .61
(66,3)
20A
2 .81
(71,4)
2 .07
(52,6)
1 .16
(29,5)
2 .375
(60,33)
3 .36
(85,3)
WIRE LEADS, 18AWG,
(16AWG FOR 10A).
102(4.0) MIN.
BLUE
6.36(0.25) FASTON TERMINAL
WITH Ø1.78 (0.070) HOLE
(SLOTTED HOLE
FOR GROUND)
A D
A D
G/Y
BROWN
BROWN
B
E
B
E
BLUE
C
C
F1199DD (10, 20 and 30Amp) Dimensions
Amps
A
B
C
D
E
10A
2 .53
(64,3)
1 .82
(46,2)
1 .16
(29,5)
2 .126
(54,0)
2 .72
(69,1)
20A
2 .81
(71,4)
2 .07
(52,6)
1 .16
(29,5)
2 .375
(60,33)
3 .46
(87,9)
30A
4 .20
(106,7)
3 .38
(85,9)
1 .53
(38,9)
3 .75
(95,25)
5 .34
(135,6)
MOUNTING
FLANGE
#8-3 SCREW
TERMINAL
F1100PP Recommended PC Mounting
.250 Dia . Pads
5 Places
1 .75
.210
A D
E
Stamp this surface
1 .25
B
C
L
I
N
E
.062 Dia . Hole
5 Places
L
O
A
D
.500
.750
1 .00
.75
6
www .curtisind .com
Curtis Industries
A Division of Powers Holdings, Inc .
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F1200/F1250/F1299 RFI Filters
Features:
• Designed for General Purpose
Common Mode and Differential
Mode Applications
• Higher Line-to-Line Capacitance
for Protection from Pulsed,
Intermittent, or Continuous RFI
1A
2A
6A
10A
20A
30A
Termination
Line/Load
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
.50
Frequency - MHz
1.0
5.0
10
30
F1200AA01
F1200BB01
QC/QC
Wire/Wire
Common
Differential
20
4
35
38
43
59
52
66
55
62
50
54
F1250AA01
F1250BB01
QC/QC
Wire/Wire
Common
Differential
20
4
30
38
37
59
50
66
50
62
50
54
F1299AA02
F1299BB02
QC/QC
Wire/Wire
Common
Differential
24
6
35
35
43
50
45
55
45
50
40
45
F1200AA03
F1200BB03
F1200CA03
QC/QC
Wire/Wire
IEC/QC
Common
Differential
20
4
35
38
43
59
52
70
55
64
50
59
F1250AA03
F1250BB03
F1250CA03
QC/QC
Wire/Wire
IEC/QC
Common
Differential
20
4
30
38
37
59
50
70
50
64
50
59
F1299AA03
F1299BB03
F1299CA03
QC/QC
Wire/Wire
IEC/QC
Common
Differential
26
6
37
40
45
55
45
55
45
50
40
45
F1200AA06
F1200BB06
F1200CA06
QC/QC
Wire/Wire
IEC/QC
Common
Differential
10
9
22
25
30
48
46
70
50
70
45
62
F1250AA06
F1250BB06
F1250CA06
QC/QC
Wire/Wire
IEC/QC
Common
Differential
10
9
20
25
27
48
45
70
45
70
45
62
F1299AA06
F1299BB06
F1299CA06
QC/QC
Wire/Wire
IEC/QC
Common
Differential
20
6
31
35
40
50
45
55
45
50
40
45
F1200AA10
F1200BB10
F1200CA10
QC/QC
Wire/Wire
IEC/QC
Common
Differential
10
10
22
16
30
43
46
70
50
70
45
66
F1250AA10
F1250BB10
F1250CA10
QC/QC
Wire/Wire
IEC/QC
Common
Differential
10
10
20
16
27
43
45
70
45
70
45
66
F1299AA10
F1299BB10
F1299CA10
F1299DD10
QC/QC
Wire/Wire
IEC/QC
Screw/Screw
Common
Differential
9
14
20
14
25
38
38
50
42
48
40
45
F1200AA20
F1200DD20
QC/QC
Screw/Screw
Common
Differential
10
9
22
19
30
44
42
70
47
70
40
70
F1250AA20
F1250DD20
QC/QC
Screw/Screw
Common
Differential
10
9
20
19
25
44
38
70
40
70
40
70
F1299AA20
F1299DD20
QC/QC
Screw/Screw
Common
Differential
10
14
20
14
28
38
35
50
38
48
40
45
F1200DD30
Screw/Screw
Common
Differential
7
11
15
13
20
44
34
70
42
60
40
57
F1299DD30
Screw/Screw
Common
Differential
12
15
23
40
30
55
35
55
38
55
40
50
SINGLE PHASE FILTERS
3A
Part
Number
General Purpose
Nominal
Current
Rating
• Available in Standard (F1200) and
Low-Leakage (F1250) (F1260)
(F1270) (F1280) (F1299) Models
• Available with Integral IEC
Connector up to 10Amps
NOTE: Other combinations of terminals may be specified on special order.
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
7
F1200/F1250/F1299 RFI Filters (continued)
SINGLE PHASE FILTERS
E78454
064179 72031204
E78454
099523 72102892
L
LI NE
L
G
N
N
F1299 Simplified Schematic
L
L
G
N
N
F1280
.015mA
.025mA
F1290
.030mA
.050mA
Except 30Amp
Agency Approvals
F1299:
F1200AA/F1250AA (1, 3, 6, 10 and 20Amp) Dimensions
Amps
A
B
C
D
E
F
1A
2 .750
(69,9)
2 .00
(50,8)
.875
(22,2)
2 .375
(60,3)
1 .750
(44,5)
.550
(14,0)
3A
2 .750
(69,9)
2 .00
(50,8)
1 .125
(28,5)
2 .375
(60,3)
1 .750
(44,5)
.550
(14,0)
6A
2 .750
(69,9)
2 .00
(50,8)
1 .125
(28,5)
2 .375
(60,3)
1 .750
(44,5)
.550
(14,0)
10A
2 .750
(69,9)
2 .00
(50,8)
1 .125
(28,5)
2 .375
(60,3)
2 .000
(50,8)
.550
(14,0)
20A
3 .310
(84,1)
2 .50
(63,5 )
1 .500
(38,1)
2 .940
(74,7)
2 .000
(50,8)
.550
(14,0)
.188 Dia .
(4,77) 2 Holes
L
I
N
E
B
F
L
O
A
D
Amps
A
B
C
D
E
1A
2 .750
(69,9)
2 .00
(50,8)
.875
(22,2)
2 .375
(60,3)
1 .750
(44,5)
3A
2 .750
(69,9)
2 .00
(50,8)
1 .125
(28,5)
2 .375
(60,3)
1 .750
(44,5)
6A
2 .750
(69,9)
2 .00
(50,8)
1 .125
(28,5)
2 .375
(60,3)
1 .750
(44,5)
10A
2 .750
(69,9)
2 .00
(50,8)
1 .125
(28,5)
2 .375
(60,3)
2 .000
(50,8)
www .curtisind .com
A
D
E
F
C
.250 QC
(6,4)
F1200BB/FB1250BB (1, 3, 6 and 10Amp) Dimensions
8
LO A D
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC 1A
2A
3A
6A
10A
20A 30A
250VAC 1A
1 .5A 2 .5A
4A
6A
10A 15A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
F1200 Series
F1299 Series
Line to Ground:
1500VAC
1500VAC
Line to Line:
1768VDC
1450VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max at rated current
Humidity Range: 0% to 95% R .H .
Termination:
A: QC – Quick Connect
C: IEC Receptacle
B: Wire
D: Screw
Maximum Leakage Current:
Each Line to Ground F1200
F1250
F1299
F1260 F1270
115VAC, 60Hz:
0.40mA
0.25mA
.25mA
.25mA .002mA
250VAC, 50Hz:
.75mA
.40mA
.45mA
.45mA .005mA
Agency Approvals
F1200/F1250:
LO A D
F1200/F1250 Simplified Schematic
LI NE
General Purpose
Specifications:
.188 Dia .
(4,77) 2 Holes
B
.250± .062
(6,35) Typ.
4 .000
(101,6)
Min .
No. 18
Gauge Wire
Curtis Industries
A Division of Powers Holdings, Inc .
L
I
N
E
L
O
A
D
D
A
E
C
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F1200CA/F1250CA (3, 6, and 10Amp) Dimensions
L
I
N
E
D
(2) No. 6-32
UNC2B
L
O
A
D
B
A
C
F1200DD/F1250DD
A
B
C
D
3A
2 .55
(64,8)
2 .000
(50,8)
1 .50
(38,1)
1 .575
(40,0)
6A
3 .05
(77,5)
2 .000
(50,8)
1 .500
(38,1)
1 .575
(40,0)
10A
3 .05
(77,5)
2 .000
(50,8)
1 .500
(38,1)
1 .575
(40,0)
F1200DD30
(20Amp Only) Dimensions
(30Amp Only) Dimensions
.188 Dia .
(4,77) 2 Holes
(5) No. 8-32
Studs
.625
(15,8)
L
O
A
D
2 .940
(74,7)
2 .000
(50,8)
3 .370
(85,57)
3 .312
(84,1)
.625
(15,8)
.590
(14,99)
L
O
A
D
3 .750
(95,25)
3 .140
(79,75)
1 .520
(38,61)
1 .500
(38,1)
Also Available
with .250” Quick
Connect Terminals
L
I
N
E
2 .000
(50,8)
No. 8-32 Stud
4 .140
(105,2)
.250 X .156
Slot
3 .875
(98,42)
F1299AA (2, 3, 6, 10 and 20Amp) Dimensions
Amps
A
B
C
D
E
2A
2 .81
(71,4)
2 .07
(52,6)
0 .91
(23,1)
2 .375
(60,33)
3 .10
(78,7)
3A
2 .81
(71,4)
2 .07
(52,6)
1 .16
(29,5)
2 .375
(60,33)
3 .10
(78,7)
6A
2 .81
(71,4)
2 .07
(52,6)
1 .16
(29,5)
2 .375
(60,33)
3 .10
(78,7)
10A
2 .81
(71,4)
2 .07
(52,6)
1 .16
(29,5)
2 .375
(60,33)
3 .35
(85,1)
20A
3 .35
(85,1)
2 .56
(65,0)
1 .53
(38,9)
2 .938
(74,63)
3 .35
(85,1)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
SINGLE PHASE FILTERS
2 .500
(63,5)
.600
(15,24)
L
I
N
E
General Purpose
Refer to Page 40
for Standard
Mounting Cutouts
Amps
6.36(0.25) FASTON TERMINAL
WITH Ø1.78 (0.070) HOLE
(SLOTTED HOLE
FOR GROUND)
A D
B
E
Curtis Industries
A Division of Powers Holdings, Inc .
C
1-800-657-0853
9
F1200/F1250/F1299 RFI Filters (continued)
SINGLE PHASE FILTERS
General Purpose
F1299BB (2, 3, 6 and 10Amp) Dimensions
Amps
A
B
C
D
E
2A
2 .81
(71,4)
2 .07
(52,6)
0 .91
(23,1)
2 .375
(60,33)
1 .81
(46,0)
3A
2 .81
(71,4)
2 .07
(52,6)
1 .16
(29,5)
2 .375
(60,33)
3 .10
(78,7)
6A
2 .81
(71,4)
2 .07
(52,6)
1 .16
(29,5)
2 .375
(60,33)
3 .10
(78,7)
10A
2 .81
(71,4)
2 .07
(52,6)
1 .16
(29,5)
2 .375
(60,33)
2 .07
(52,6)
WIRE LEADS, 18AWG,
(16AWG FOR 10A).
102(4.0) MIN.
BLUE
A D
BLUE
G/Y
BROWN
BROWN
B
E
C
F1299CA (3, 6 and 10Amp) Dimensions
Amps
A
B
C
D
3A
3 .21
(81,5)
2 .25
(57,2)
1 .28
(32,5)
1 .575
(40,0)
6A
3 .21
(81,5)
2 .25
(57,2)
1 .28
(32,5)
1 .575
(40,0)
10A
3 .71
(94,2)
2 .25
(57,2)
1 .28
(32,5)
1 .575
(40,0)
B
#6-32
INSERT
C
A
16.0
(0.63)
6.35(0.25) FASTON TERMINAL,
WITH Ø1.78(0.070) HOLE
(SLOTTED HOLE FOR GROUND)
D
IEC CONNECTOR
F1299DD (10, 20 and 30Amp) Dimensions
Amps
A
B
C
D
E
10A
2 .81
(71,40)
2 .07
(52,6)
1 .16
(29,5)
2 .375
(60,33)
3 .46
(87,9)
20A
3 .35
(85,1)
2 .56
(65,0)
1 .53
(38,9)
2 .938
(74,63)
3 .46
(87,9)
30A
4 .20
(106,7)
3 .38
(85,9)
1 .53
(38,9)
3 .750
(95,25)
5 .34
(135,6)
MOUNTING
FLANGE
#8-3 SCREW
TERMINAL
A D
B
E
C
SLOTTED HOLE,
6.4(.25)X4.0(.16)
#8-32 SCREW
TERMINAL
A
B
D
50.8 (2.00)
E
10
www .curtisind .com
C
Curtis Industries
A Division of Powers Holdings, Inc .
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F1300/F1350/F1399 RFI Filters
Features:
Nominal
Current
Rating
1A
2A
6A
10A
15A
20A
Termination
Line/Load
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
.50
Frequency - MHz
1.0
5.0
10
30
F1300AA01
F1300BB01
QC/QC
Wire/Wire
Common
Differential
40
2
65
57
65
69
65
70
65
70
65
60
F1350AA01
F1350BB01
QC/QC
Wire/Wire
Common
Differential
30
2
60
57
65
69
65
70
65
70
65
60
F1399AA02
F1399BB02
QC/QC
Wire/Wire
Common
Differential
40
5
65
45
65
70
65
65
65
60
40
50
F1300AA03
F1300BB03
F1300CA03
F1300CP03
QC/QC
Wire/Wire
IEC/QC
IEC/PC
Common
Differential
40
7
65
64
65
70
65
70
65
70
65
58
F1350AA03
F1350BB03
F1350CA03
F1350CP03
QC/QC
Wire/Wire
IEC/QC
IEC/PC
Common
Differential
30
7
60
64
65
70
65
70
65
70
65
58
F1399AA03
F1399BB03
F1399CA03
QC/QC
Wire/Wire
IEC/QC
Common
Differential
40
12
65
55
65
70
65
65
65
60
40
50
F1300AA06
F1300BB06
F1300CA06
QC/QC
Wire/Wire
IEC/QC
Common
Differential
12
10
48
40
60
70
65
70
65
70
65
60
F1350AA06
F1350BB06
F1350CA06
QC/QC
Wire/Wire
IEC/QC
Common
Differential
2
10
40
40
60
70
65
70
65
70
65
60
F1399AA06
F1399BB06
F1399CA06
QC/QC
Wire/Wire
IEC/QC
Common
Differential
30
5
55
40
65
70
65
65
65
60
40
50
F1300AA10
F1300BB10
F1300CA10
QC/QC
Wire/Wire
IEC/QC
Common
Differential
12
13
48
13
60
64
65
70
65
67
65
56
F1350AA10
F1350BB10
QC/QC
Wire/Wire
Common
Differential
2
13
40
13
60
64
65
70
65
67
65
56
F1399AA10
F1399BB10
F1399CA10
F1399DD10
QC/QC
Wire/Wire
IEC/QC
Screw/Screw
Common
Differential
5
5
40
12
52
50
60
65
60
60
50
55
F1300AA15
QC/QC
Common
Differential
14
15
35
10
44
45
56
70
58
67
55
56
F1300AA20
QC/QC
Common
Differential
5
—
44
—
60
35
65
60
65
57
60
45
F1350AA20
QC/QC
Common
Differential
2
—
35
—
61
35
63
60
60
57
50
45
F1399AA20
F1399DD20
QC/QC
Screw/Screw
Common
Differential
5
5
40
12
52
50
60
65
60
60
52
55
SINGLE PHASE FILTERS
3A
Part
Number
General Purpose
• T Circuit Configuration—Designed for Motor,
Capacitive and Other Low Impedance Loads
• Dual Coils — Higher Performance in Unknown RFI
and Noise Susceptibility Applications
• Integral IEC Connector and PC Mounted Versions
Now Available
NOTE: Other combinations of terminals may be specified on special order.
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
11
F1300/F1350/F1399 RFI Filters (continued)
General Purpose
Specifications:
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
1A
2A
3A
6A
10A
250VAC
1A
1 .5A
2 .5A
4A
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
F1300/F1350
Line to Ground:
1500VAC
Line to Line:
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination: A: QC – Quick Connect
C: IEC Receptacle
B: Wire
P: PCB Pins
Maximum Leakage Current: Each Line to Ground
115VAC, 60Hz:
250VAC, 50Hz:
Agency Approvals:
SINGLE PHASE FILTERS
E78454
F1300
0.4mA
.75mA
15A
15A
20A
16A
F1350 D1399
0.25mA 0.25mA
.40mA 0.45mA
F1360
.15mA
.25mA
F1380 F1390
.015mA .030mA
.025mA .050mA
064179 72031204 72031204
Except 15Amp
A
F1300AA (1, 3, 6, 10 and 15Amp)
F1350AA (1, 3, 6 and 10Amp) Dimensions
Amps
A
B
C
D
E
1A
2 .750
(69,9)
1 .750
(44,5)
1 .125
(28,5)
2 .375
(60,3)
2 .925
(74,3)
3A
3 .312
(84,1)
2 .000
(50,8)
1 .125
(28,5)
2 .940
(74,7)
3 .49
(88,7)
6A
3 .312
(84,1)
2 .000
(50,8)
1 .125
(28,5)
2 .940
(74,7)
3 .49
(88,7)
10A
3 .312
(84,1)
2 .000
(50,8)
1 .500
(38,1)
2 .940
(74,7)
3 .49
(88,7)
15A
3 .312
(84,1)
2 .000
(50,8)
1 .500
(38,1)
2 .940
(74,7)
3 .49
(88,7)
L
I
N
E
A
B
C
D
E
1A
2 .750
(69,9)
1 .750
(44,5)
1 .125
(28,5)
2 .375
(60,3)
2 .000
(50,8)
3A
3 .312
(84,1)
2 .000
(50,8)
1 .125
(28,5)
2 .940
(74,7)
2 .500
(63,5)
6A
3 .312
(84,1)
2 .000
(50,8)
1 .125
(28,5)
2 .940
(74,7)
2 .500
(63,5)
10A
3 .312
(84,1)
2 .000
(50,8)
1 .500
(38,1)
2 .940
(74,7)
2 .500
(63,5)
B
E
.250 QC
(6,4)
(1, 3, 6 and 10Amp) Dimensions
www .curtisind .com
L
O
A
D
C
A
.188 Dia .
(4,77)
2 Holes
Amps
.188 Dia .
(4,77)
2 Holes
D
F1300BB/F1350BB
12
F1370
.002mA
.005mA
D
L
I
N
E
L
O
A
D
E
C
Curtis Industries
A Division of Powers Holdings, Inc .
B
4 .000
(101,6)
Min .
.250± .062
(6,35) Typ.
No. 18 Gauge Wire
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F1300/F1350 Simplified Schematic
L
G
N
N
LO A D
LI NE
L
L
I
N
E
Refer to Page 40
for Standard
Mounting Cutouts
A
B
C
D
E
3A
2 .500
(63,6)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.565
(14,3)
6A
2 .500
(63,5)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.565
(14,3)
10A
2 .880
(73,1)
2 .120
(53,8)
1 .500
(38,1)
.65
(16,0)
.565
(14,3)
L
I
N
E
L
O
A
D
(2) No. 6-32
UNC2B
E
B
D
A
C
.250 QC
(6,4)
SINGLE PHASE FILTERS
Amps
L
O
A
D
2 .000
(50,8)
F1300CP/F1350CP
(3Amp Only) Dimensions
.935
(23,7)
(2) No. 6-32
UNC2B
.500
(12,7)
1 .500
(38,1)
2 .500
(68,3)
.210
(53,3)
Refer to Page 40
for Standard
Mounting Cutouts
1 .540
(39,1)
.25
(6,35)
.65
(16,51)
F1300AA/F1350AA
(20Amp Only) Dimensions
General Purpose
F1300CA (3, 6 and 10Amp)
F1350CA (3 and 6Amp) Dimensions
.65
(16,51)
3 .75
(95,25)
3 .35
(85,09)
.156
(3,96)
2 .00
(50,8)
1 .52
(38,61)
4 .12
(104.64)
.96
(24,38)
3 .92
(99,56)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
13
F1100/F1150
F1300/F1399 RFI
RFI Filters
Filters (continued)
F1399 Simplified Schematic
BLUE
BROWN
BROWN
LO A D
LI NE
General Purpose
SINGLE PHASE FILTERS
BLUE
G/Y
D
C
Amps
A
B
C
D
E
2A
3 .35
(85,1)
1 .81
(46,0)
1 .16
(29,5)
2 .375
(60,33)
2 .78
(70,6)
3A
3 .85
(97,8)
2 .07
(52,6)
1 .16
(29,5)
2 .938
(74,63)
3 .35
(85,1)
6A
3 .85
(97,8)
2 .07
(52,6)
1 .16
(29,5)
2 .938
(74,63)
3 .35
(85,1)
10A
3 .85
(97,8)
2 .07
(52,6)
1 .53
(38,9)
2 .938
(74,63)
3 .35
(85,1)
20A
5 .23
(132,8)
3 .37
(85,6)
1 .53
(38,9)
3 .75
(95,25)
4 .20
(106.7)
F1399DD (10 and 20Amp) Dimensions
Amps
A
B
C
D
E
10A
3 .96
(100,6)
2 .07
(52,6)
1 .53
(38,9)
2 .938
(74,63)
3 .35
(85,1)
20A
5 .34
(135,6)
3 .37
(85,6)
1 .53
(38,9)
3 .75
(95,25)
4 .20
(106,7)
D
Amps
A
B
C
D
E
2A
2 .07
(52.6)
1 .81
(46,0)
1 .16
(29,5)
2 .375
(60,33)
2 .78
(70,6)
3A
2 .56
(65,0)
2 .07
(52,6)
1 .16
(29,5)
2 .938
(74,63)
3 .35
(85.1)
6A
2 .56
(65,0)
2 .07
(52,6)
1 .16
(29,5)
2 .938
(74,63)
3 .35
(85.1)
10A
2 .56
(65,0)
2 .07
(52,6)
1 .53
(38,9)
2 .938
(74,63)
3 .35
(85,1)
B
C
16.0
(0.63)
6.35(0.25) FASTON TERMINAL,
WITH Ø1.78(0.070) HOLE
(SLOTTED HOLE FOR GROUND)
D
IEC CONNECTOR
F1399CA (3, 6 and 10Amp) Dimensions
Amps
A
B
C
D
3A
4 .33
(110,0)
2 .25
(57,2)
1 .28
(32,5)
1 .575
(40,0)
6A
4 .33
(110,0)
2 .25
(57,2)
1 .28
(32,5)
1 .575
(40,0)
10A
4 .33
(110,0)
2 .25
(57,2)
1 .53
(38,9)
1 .575
(40,0)
#8-32 SCREW
TERMINAL
SLOTTED HOLE,
6.4(.25)X4.0(.16)
#8-32 SCREW
TERMINAL
A
B
D
C
50.8 (2.00)
E
www .curtisind .com
A
#6-32
INSERT
B
E
A
C
F1399BB (2, 3, 6 and 10Amp) Dimensions
B
A
E
B
D
A
6.36(0.25) FASTON TERMINAL
WITH Ø1.78 (0.070) HOLE
(SLOTTED HOLE FOR GROUND)
F1399AA (2, 3, 6, 10 and 20Amp) Dimensions
14
WIRE LEADS, 18AWG,
(16AWG FOR 10A).
102(4.0) MIN.
E
Curtis Industries
A Division of Powers Holdings, Inc .
C
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F1900 RFI Filters
Specifications:
• Designed for Equipment Requiring UL1410 Approval
(Consumer Electronics)
• Utilizes UL1414 Approved Components
• Greater Differential Mode Protection
General Purpose
Features:
Rated Voltage: 125VAC Maximum - 50/60 Hz
Rated Current: 120VAC
3A
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated urrent
Humidity Range: 0% to 95% R .H .
Termination:
A: QC – Quick Connect
Maximum Leakage Current:
Each Line to Ground
F1900
115VAC, 60Hz:
0.25mA
Agency Approvals:
F1900 Simplified Schematic
L
LOAD
G
E78454
064179
N
N
SINGLE PHASE FILTERS
LINE
L
.188 Dia .
(4,77)
2 Holes
F1900AA
(3 and 6Amp) Dimensions
2 .375
(60,3)
L
O
A
D
L
I
N
E
2 .000
(50,8)
2 .750
(69,9)
1 .750
(44,4)
.550
(14)
.550
(14)
1 .125
(28,5)
.250 QC
(6,4)
Nominal
Current
Rating
Part
Number
Termination
Line/Load
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
.50
Frequency - MHz
1.0
5.0
10
30
3A
F1900AA03
QC/QC
Common
Differential
20
7
30
19
37
28
50
50
50
57
50
70
6A
F1900AA06
QC/QC
Common
Differential
10
8
20
18
27
24
45
45
45
52
45
64
NOTE: Other combinations of terminals may be specified on special order.
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
15
Specifications:
Features:
• High Peak Current Design — High Insertion Loss for
Switching Power Supply Emissions
• Low-Leakage Current
• Compact Case Sizes in 6 and 10Amp Models
• Available with Integral IEC Connector in 3 and 6Amp
Models
F1400 Simplified Schematic
G
N
N
LOAD
L
L
LINE
SINGLE PHASE FILTERS
High Performance
F1400 RFI Filters
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
1 .5A
6A
4A
10A
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
A: QC – Quick Connect
B: Wire
C: IEC Receptacle
Maximum Leakage Current:
Each Line to Ground
F1400
115VAC, 60Hz:
0.25mA
250VAC, 50Hz:
0.40mA
Agency Approvals:
E78454
Nominal
Current
Rating
Part
Number
Termination
Line/Load
064179 72031235
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
.50
Frequency - MHz
1.0
5.0
10
30
3A
F1400AA03
F1400BB03
F1400CA03
QC/QC
Wire/Wire
IEC/QC
Common
Differential
58
40
65
60
65
65
65
65
60
65
44
60
6A
F1400AA06
F1400BB06
F1400CA06
QC/QC
Wire/Wire
IEC/QC
Common
Differential
58
36
65
55
65
60
65
60
60
55
54
50
10A
F1400AA10
F1400BB10
QC/QC
Wire/Wire
Common
Differential
56
40
65
50
65
60
65
65
60
65
54
60
NOTE: Other combinations of terminals may be specified on special order.
16
www .curtisind .com
Curtis Industries
A Division of Powers Holdings, Inc .
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F1400AA (3, 6 and 10Amp) Dimensions
D
A
.188 Dia .
(4,77)
2 Holes
L
O
A
D
F
B
E
F
C
.250 QC
(6,4)
Amps
A
B
C
D
E
F
3A
3 .310
(84,1)
2 .000
(50,8)
1 .500
(38,2)
2 .940
(74,7)
2 .500
(63,5)
.550
(14,0)
6A
3 .310
(84,1)
2 .000
(50,8)
1 .500
(38,2)
2 .940
(74,7)
2 .500
(63,5)
.550
(14,0)
10A
4 .70
(119,4)
2 .250
(57,1)
1 .750
(44,4)
4 .250
(107,9)
3 .750
(95,3)
.550
(14,0)
Amps
A
B
C
D
E
3A
3 .310
(84,1)
2 .000
(50,8)
1 .500
(38,1)
2 .940
(74,7)
2 .500
(63,5)
6A
3 .310
(84,1)
2 .000
(50,8)
1 .500
(38,1)
2 .940
(74,7)
2 .500
(63,5)
10A
4 .70
(119,4)
2 .250
(57,1)
1 .750
(44,4)
4 .250
(107,9)
3 .750
(95,3)
D
A
L
I
N
E
L
O
A
D
B
4 .00
E
.250± .062
(6,35) Typ.
(101,6)
Min .
C
SINGLE PHASE FILTERS
F1400BB (3, 6 and 10Amp) Dimensions
High Performance
L
I
N
E
No. 18
Gauge Wire
F1400CA (3 and 6Amp) Dimensions
E
L
I
N
E
6-32 Tap
2-Places
L
O
A
D
A
C
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
B
D
.250 QC
(6,4)
Refer to Page 40
for Standard
Mounting Cutouts
Amps
A
B
C
D
E
3A
2 .880
(73,1)
2 .120
(53,8)
1 .500
(38,1)
.550
(14,0)
.565
(14,3)
6A
2 .880
(73,1)
2 .120
(53,8)
1 .500
(38,1)
.550
(14,0)
.565
(14,3)
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
17
F1500 RFI Filters
Features:
• IEC Connector Plus
Common and Differential
Mode Performance in Compact Case
• “L” Circuit Configuration — Cost-Effective in Many
Linear and Switching Power Supply Applications
• High-Inductance Design for Greater Attenuation
• Available with 0.250" Quick Connect Terminals or
Wire Leads on the Load Side
Termination
Line/Load
G
N
N
N
Part
Number
L
LOAD
L OAD
G
N
064179 72031307
L
L
L
LINE
E78454
F1500FA Simplified Schematic
F1500CA Simplified Schematic
Nominal
Current
Rating
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
1 .5A
6A
3A
10A
6A
15A
8A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
A: QC – Quick Connect
C: IEC Receptacle
F: IEC Receptacle with Fuse Holder
Maximum Leakage Current:
Each Line to Ground
F1500
115VAC, 60Hz:
0.25mA
250VAC, 50Hz:
0.40mA
Agency Approvals:
LINE
SINGLE PHASE FILTERS
High Performance
Specifications:
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
.50
Frequency - MHz
1.0
5.0
10
30
3A
F1500CA03
F1500FA03
IEC/QC
Fused IEC/QC
Common
Differential
32
35
43
60
50
65
50
60
50
55
50
40
6A
F1500CA06
F1500FA06
IEC/QC
Fused IEC/QC
Common
Differential
32
30
42
60
45
65
45
65
45
60
45
50
10A
F1500CA10
F1500FA10
IEC/QC
Fused IEC/QC
Common
Differential
29
15
36
50
39
65
45
65
45
60
45
50
15A
F1500CA15
IEC/QC
Common
Differential
26
35
32
60
36
65
44
65
46
65
52
65
NOTE: Other combinations of terminals may be specified on special order.
18
www .curtisind .com
Curtis Industries
A Division of Powers Holdings, Inc .
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F1500CA
E
(3, 6, 10 and 15Amp) Dimensions
Refer to Page 40
for Standard
Mounting Cutouts
L
O
A
D
L
I
N
E
B
High Performance
(2) No. 6-32 UNC2B
A
B
C
D
E
3A
2 .000
(50,8)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.565
(14,3)
6A
2 .500
(63,5)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.565
(14,3)
10A
2 .500
(63,5)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.565
(14,3)
15A
3 .25
(82,6)
2 .25
(57,2)
1 .75
(44,5)
.550
(14,0)
.705
(17,9)
C
.250 QC
(6,4)
F1500FA
L
O
A
D
L
I
N
E
(3, 6 and 10Amp) Dimensions
Refer to Page 40
for Standard
Mounting Cutouts
(2) No. 6-32 UNC2B
Amps
A
B
C
D
E
3A
2 .000
(50,8)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.752
(19,1)
6A
2 .500
(63,5)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.752
(19,1)
10A
2 .500
(63,5)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.752
(19,1)
A
C
Curtis Industries
A Division of Powers Holdings, Inc .
B
D
SINGLE PHASE FILTERS
(1) 5mm x 20mm Fuse (not included)
E
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
D
A
Amps
.250 QC
(6,4)
1-800-657-0853
19
Specifications:
Features:
• T Section, Dual Coil Design – High Insertion Loss for
Switching Power Supply Emissions
• Low-Leakage Current Design
• Space-Efficient with Integral IEC Connector and
Compact Case in Current Ratings up to 10Amps
• Available in Fused IEC Connector and PC Mounted
Versions
F1600CX Simplified Schematic
L
LOAD
L
LINE
SINGLE PHASE FILTERS
High Performance
F1600 RFI Filters
G
N
N
F1600FA Simplified Schematic
L
L OAD
LINE
L
G
N
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
1 .5A
6A
3A
10A
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
A: QC – Quick Connect
B: Wire
C: IEC Receptacle
F: Fused IEC
P: PCB Pins
Maximum Leakage Current:
Each Line to Ground
F1600
115VAC, 60Hz:
0.25mA
250VAC, 50Hz:
0.40mA
Agency Approvals:
N
E78454
Nominal
Current
Rating
Part
Number
Termination
Line/Load
064179 72031235
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
.50
Frequency - MHz
1.0
5.0
10
30
3A
F1600CA03
F1600CP03
F1600FA03
F1600CB03
IEC/QC
IEC/PC
Fused IEC/QC
IEC/Wire
Common
Differential
52
40
65
50
65
60
65
65
65
65
65
50
6A
F1600CA06
F1600CP06
F1600FA06
F1600CB06
IEC/QC
IEC/PC
Fused IEC/QC
IEC/Wire
Common
Differential
45
30
65
45
65
55
65
50
65
50
59
50
10A
F1600CA10
F1600CB10
IEC/QC
IEC/Wire
Common
Differential
50
23
65
45
65
55
65
50
65
50
54
50
NOTE: Other combinations of terminals may be specified on special order.
20
www .curtisind .com
Curtis Industries
A Division of Powers Holdings, Inc .
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F1600CA (3, 6 and 10Amp) Dimensions F1600CB (3, 6 and 10Amp) Dimensions
E
L
O
A
D
Refer to Page 40
for Standard
Mounting Cutouts
B
(2) No. 6-32 UNC2B
A
D
C
.250 QC
A
B
C
D
E
3A
2 .500
(63,5)
2 .000
(50,8)
1 .500
(38,2)
.550
(14,0)
.565
(14,3)
6A
2 .500
(63,5)
2 .000
(50,8)
1 .500
(38,2)
.550
(14,0)
.565
(14,3)
10A
3 .750
(95,2)
2 .250
(57,2)
1 .750
(44,5)
.550
(14,0)
.640
(16,3)
L
O
A
D
L
I
N
E
(3 and 6Amp)
Dimensions
Refer to Page 40
for Standard
Mounting Cutouts
.935
(19,1)
(2) No. 6-32
UNC2B
2,500
(63.5)
.500
(12,7)
.210
(53,3)
1 .500
(38.2)
1 .540
(39,1)
(1) 5mm x 20mm FUSE
(not included)
.752
(19,1)
F1600FA
(3 and 6Amp)
Dimensions
Refer to Page 40
for Standard
Mounting Cutouts
2 .00
(50,8)
L
O
A
D
L
I
N
E
(2) No. 6-32 UNC2B
2 .500
(63,5)
1 .500
(38,2)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
SINGLE PHASE FILTERS
F1600CP
Amps
High Performance
L
I
N
E
B
.550
(14.0)
.250 QC
(6,4)
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
21
F1700/F1799 RFI Filters
Specifications:
F1700 Simplified Schematic
L
LOA D
L
G
N
N
F1799 Simplified Schematic
L
LOAD
L
LINE
SINGLE PHASE FILTERS
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
2 .5A
6A
4A
10A
6A
20A
10A
30A
15A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
A: QC – Quick Connect
C: IEC Receptacle
B: Wire
D: Screw
Maximum Leakage Current:
Each Line to Ground F1700 F1710 F1720 F1740 F1799
115VAC, 60Hz: 0.40mA .15mA .002mA .060mA 0.25mA
250VAC, 50Hz: 0.75mA .25mA .005mA .120mA 0.45mA
Agency Approvals:
• General Purpose —
Designed for
Applications with
Higher Differential
Mode Noise
• Higher Line-to-Line
Capacitance for
Protection from Pulsed,
Intermittent or Continuous RFI
• A Cost-Effective Replacement for Independent
Coil Design in Many SMPS Applications
• Available with Integral IEC Connector
LINE
High Performance
Features:
G
Nominal
Current
Rating
E78454
N
N
Part
Number
Termination
Line/Load
064179 72031235
Except F1700DD30
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
.50
1.0
5.0
10
30
Common
Differential
20
25
35
60
43
65
52
65
55
50
50
50
QC/QC
Common
Differential
20
25
34
60
40
65
45
65
45
50
40
50
F1720AA03
QC/QC
Common
Differential
20
35
32
60
35
65
35
60
35
55
40
40
F1740AA03
QC/QC
Common
Differential
20
35
30
60
35
65
35
60
35
55
40
40
6A
F1700AA06
F1700BB06
F1700CA06
QC/QC
Wire/Wire
IEC/QC
Common
Differential
10
15
22
50
30
65
46
60
50
60
45
60
10A
F1700AA10
F1700BB10
F1700CA10
QC/QC
Wire/Wire
IEC/QC
Common
Differential
10
20
22
45
30
60
46
65
50
60
45
55
F1700AA20
QC/QC
Common
Differential
10
15
22
45
30
60
42
65
47
60
40
55
F1700DD20
F1720DD20
Screw/Screw
Common
Differential
10
15
22
45
30
60
42
65
47
60
52
55
F1700DD30
Screw/Screw
Common
Differential
7
15
15
45
20
60
34
65
42
60
40
55
F1799DD30
Screw/Screw
Common
Differential
10
15
45
65
55
65
60
65
60
60
50
55
3A
20A
30A
F1700AA03
F1700BB03
F1700CA03
QC/QC
Wire/Wire
IEC/QC
F1710AA03
NOTE: Other combinations of terminals may be specified on special order.
22
www .curtisind .com
Curtis Industries
A Division of Powers Holdings, Inc .
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F1700AA, 1710, 1720, 1740 (3, 6 and 10Amp) Dimensions
A
D
L
O
A
D
F
B
C
D
E
F
3A
2 .750
(69,8)
1 .750
(44,4)
1 .125
(28,5)
2 .375
(60,3)
2 .000
(50,8)
.550
(14,0)
6A
3 .312
(84,1)
2 .000
(50,8)
1 .125
(28,5)
2 .940
(74,7)
2 .500
(63,5)
.550
(14,0)
10A
3 .312
(84,1)
2 .000
(50,8)
1 .500
(38,2)
2 .940
(74,7)
2 .500
(63,5)
.550
(14,0)
B
E
20A
F
.250 QC
E
A
B
C
D
E
3A
2 .750
(69,8)
1 .750
(44,4)
1 .125
(28,5)
2 .375
(60,3)
2 .000
(50,8)
6A
3 .312
(84,1)
2 .000
(50,8)
1 .125
(28,5)
2 .940
(74,7)
2 .500
(63,5)
10A
3 .312
(84,1)
2 .000
(50,8)
1 .500
(38,1)
2 .940
(74,7)
2 .500
(63,5)
Refer to Page 40
for Standard
Mounting Cutouts
C
C
D
E
3A
2 .000
(50,8)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.565
(14,3)
6A
2 .500
(63,5)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.565
(14,3)
10A
2 .500
(63,5)
2 .000
(50,8)
1 .500
(38,1)
.550
(14,0)
.565
(14,3)
1 .520
(38,6)
.250
± .062
(6,35)
Type .
.188 Dia .
(4.77)
2 Holes
2 .500
(63,5)
(5) No. 8-32 Studs
.625
(15,87)
F1700DD30
(30Amp)
Dimensions
5 .075
(128,9)
2 .000
(50,8)
L
I
N
E
No. 18 Gauge Wire
F1700DD20 (20Amp) Dimensions
D
B
B
C
A
A
D
E
B
Amps
A
4 .00 Min .
(101,6)
(2) No. 6-32
UNC2B
L
O
A
D
(4) .250 x .156
(6,35) (3,95)
L
O
A
D
4 .140
(105,2)
SINGLE PHASE FILTERS
Amps
L
O
A
D
L
I
N
E
(3, 6 and
10Amp)
Dimensions
F1700BB (3, 6 and 10Amp) Dimensions
L
I
N
E
See 1700DD20 for Case Dimensions
F1700CA
C
(6,4)
.188 Dia .
(4.77)
2 Holes
A
High Performance
L
I
N
E
Amps
3 .312
(84,1)
3 .750
(95,2)
Terminals
No. 8-32 (5)
F1799DD (30Amp) Dimensions
L
I
N
E
L
O
A
D
2 .000
(50,8)
Also Available
with .250” Quick
Connect Terminals
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
2 .940
(74,7)
3 .312
(84,1)
.625
(15,87)
1 .500
(38,1)
SLOTTED HOLE,
6.4(.25)X4.0(.16)
#8-32 SCREW
TERMINAL
3.5
(88,90)
3.12
(79,2)
3.96
(110,6)
50.8 (2.00)
5.95
(151,1)
Curtis Industries
A Division of Powers Holdings, Inc .
2.18
(55,4)
1-800-657-0853
23
F1760/F1770/F1780 RFI Filters
Features:
• Designed for Applications Where Switching Power
Supplies, SCR’s and TTL Circuits Are Utilized
• Protection from Pulsed, Intermittent or Continuous
RFI
• Effective CM and DM Suppression for Most FCC
VDE Requirements Down to 150KHz
• Available in Stud and Quick Connect Terminal
Versions
F1760 Simplified Schematic
6A
10A
20A
24
Termination
Line/Load
L
LOAD
LINE
LOAD
Part
Number
064179 72031306
L
G
N
N
N
N
3A
E78454
L
G
Nominal
Current
Rating
Rated Voltage: 250VAC, Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
20A
14A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
A: QC – Quick Connect
D: Screw
Maximum Leakage Current:
Each Line to Ground
F1760/1770/1780
115VAC, 60Hz:
0.5mA
250VAC, 50Hz:
1.0mA
Agency Approvals:
F1770 Simplified Schematic
L
LINE
SINGLE PHASE FILTERS
High Performance
Specifications:
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
.50
Frequency - MHz
1.0
5.0
10
20
30
F1760AA03
F1760DD03
QC/QC
Screw/Screw
Common
Differential
15
40
30
65
40
65
45
60
50
55
45
55
45
55
F1780AA03
F1780DD03
QC/QC
Screw/Screw
Common
Differential
13
40
25
65
40
65
60
62
60
55
55
45
50
45
F1760AA06
F1760DD06
QC/QC
Screw/Screw
Common
Differential
15
40
30
65
35
65
35
65
44
53
43
52
42
50
F1780AA06
F1780DD06
QC/QC
Screw/Screw
Common
Differential
13
40
30
65
40
65
65
62
65
55
53
45
48
45
F1760AA10
F1760DD10
QC/QC
Screw/Screw
Common
Differential
15
40
30
65
35
65
50
55
50
50
40
50
40
50
F1780AA10
F1780DD10
QC/QC
Screw/Screw
Common
Differential
13
40
20
65
35
65
65
62
65
55
55
45
50
45
F1760AA20
F1760DD20
QC/QC
Screw/Screw
Common
Differential
12
41
25
65
31
65
42
65
47
60
50
60
40
55
F1780AA20
F1780DD20
QC/QC
Screw/Screw
Common
Differential
12
41
30
65
32
65
60
65
60
60
60
60
55
55
www .curtisind .com
Curtis Industries
A Division of Powers Holdings, Inc .
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F1780 Simplified Schematic
LI NE
G
N
N
LO A D
L
L
(3, 6, and 10Amp) Dimensions
A
B
C
D
E
F
3A
2 .750
(69,8)
1 .750
(44,4)
1 .125
(28,5)
2 .375
(60,3)
2 .000
(50,8)
.550
(14,0)
6A
3 .312
(84,1)
2 .000
(50,8)
1 .500
(28,5)
2 .940
(74,7)
2 .500
(63,5)
.550
(14,0)
10A
3 .312
(84,1)
2 .000
(50,8)
1 .500
(38,2)
2 .940
(74,7)
2 .500
(63,5)
.550
(14,0)
A
D
L
O
A
D
L
I
N
E
B
E
SINGLE PHASE FILTERS
F
F
.250 QC
(6,4)
C
F1760/F1770/1780 (20Amp Only) Dimensions
1 .520
(38,6)
5 .075
(128,9)
2 .000
(50,8)
L
I
N
E
(4) .250 x .156
(6,35) (3,95)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
High Performance
F1760/F1770/1780AA
Amps
L
O
A
D
4 .140
(105,2)
3 .312
(84,1)
3 .750
(95,2)
Terminals
No. 8-32 (5)
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
25
High Performance
F2800 RFI Filters
Specifications:
• Designed for VDE “A” and FCC “B” Switching Power
Supply Applications
• Low-Leakage Current
• Compact Case Sizes in Current Ratings up to 15A
• Effective Reduction of Common Mode and
Differential Mode Noise from 100KHz to 30MHz
F2800 Simplified Schematic 3 & 6Amp
L
LOAD
L
LINE
SINGLE PHASE FILTERS
Features:
G
N
N
F2800 Simplified Schematic 10 & 15Amp
L
LOAD
LINE
L
G
N
N
Nominal
Current
Rating
26
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
1 .5A
6A
4A
10A
6A
15A
12A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
A: QC – Quick Connect
B: Wire
Maximum Leakage Current:
Each Line to Ground
F2800
115VAC, 60Hz:
0.25mA
250VAC, 50Hz:
0.40mA
Agency Approvals:
E78454
Part
Number
Termination
Line/Load
064179 72031309
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.01
.05
.15
Frequency - MHz
.50
1.0
5.0
10
30
3A
F2800AA03
F2800BB03
QC/QC
Wire/Wire
Common
Differential
10
5
30
25
35
50
35
60
35
65
40
50
45
45
50
45
6A
F2800AA06
F2800BB06
QC/QC
Wire/Wire
Common
Differential
5
5
20
10
30
40
35
60
40
60
40
50
40
50
50
45
10A
F2800AA10
F2800BB10
QC/QC
Wire/Wire
Common
Differential
5
7
15
20
25
50
30
60
35
60
40
60
45
60
50
55
15A
F2800AA15
F2800BB15
QC/QC
Wire/Wire
Common
Differential
8
10
21
30
29
70
33
70
36
70
38
70
45
70
50
60
www .curtisind .com
Curtis Industries
A Division of Powers Holdings, Inc .
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F2800AA (3, 6 and 10Amp) Dimensions
A
.188 Dia .
(4,77)
2 Holes
D
L
O
A
D
F
E
B
F
C
.250 QC
Amps
A
B
C
D
E
F
3A
3 .310
(84,1)
2 .000
(50,8)
1 .500
(38,2)
2 .940
(74,7)
2 .500
(63,5)
.550
(14,0)
6A
3 .310
(84,1)
2 .000
(50,8)
1 .500
(38,2)
2 .940
(74,7)
2 .500
(63,5)
.550
(14,0)
10A
4 .44
(113)
2 .250
(57,1)
1 .750
(44,4)
4 .063
(103,2)
3 .630
(92,2)
.650
(16,5)
(6,4)
F2800BB (3, 6 and 10Amp) Dimensions
D
L
I
N
E
.250± .062
(6,35) Typ.
L
O
A
D
4 .00
(101,6)
Min.)
B
E
C
No. 18
Gauge
Wire
Amps
A
B
C
D
E
3A
3 .310
(84,1)
2 .000
(50,8)
1 .500
(38,1)
2 .940
(74,7)
2 .500
(63,5)
6A
3 .310
(84,1)
2 .000
(50,8)
1 .500
(38,1)
2 .940
(74,7)
2 .500
(63,5)
10A
4 .690
(119)
2 .250
(57,1)
1 .750
(44,4)
4 .063
(103,2)
3 .630
(92,2)
4 .10
(104,1)
3 .96
(100,5)
F2800AA
F2800BB
(15Amp)
Dimensions
3 .12
(79,25)
2 .00
(50,8)
L
I
N
E
.65 Max .
(16,51)
L
O
A
D
2 .00
(50,03)
SINGLE PHASE FILTERS
.188 Dia .
(4,77)
2 Holes
A
High Performance
L
I
N
E
3 .54± .015
(89,9)
.156
.56 (3,96)
(14,22)
.250 x .031 QC
(6,35) x (,78)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
27
F5100 RFI Filters
Ideal for Linear Power Supplies in Digital Equipment
Features:
• General Purpose Filter with Extended HighFrequency Insertion Loss Characteristics
• Effective Suppression of Incoming Common Mode
and Differential Mode Noise
• Low-Profile Package with Integral IEC Connector
• Available in 3, 6 and 10Amp Ratings
3A
Part
Number
E78454
Termination
Line/Load
F5100CG03
IEC/
Solder Tab
6A
F5100CG06
IEC/
Solder Tab
10A
F5100CG10
IEC/
Solder Tab
Maximum Leakage Current:
Each Line to Ground
F5100
115VAC, 60Hz:
0.25mA
250VAC, 60Hz:
0.50mA
Agency Approvals:
F5100 Simplified Schematic
L
L
LOAD
Nominal
Current
Rating
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
1 .5A
6A
4A
10A
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1400VDC
Line to Line
1450VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
C: IEC Receptacle
G: Wire Wrap/Solder
LINE
SINGLE PHASE FILTERS
Wide Band
Specifications:
G
N
N
F5100 SERIES
TYPICAL COMMON MODE
INSERTION LOSS — dB
(50 OHM CIRCUIT)
0
–20
–40
dB
–60
–80
–100
.01
28
www .curtisind .com
.1
1.0
10
FREQUENCY in MHz
Curtis Industries
A Division of Powers Holdings, Inc .
100
1000
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F5100CG (3, 6 and 10Amp) Dimensions
Refer to Page 41
for Standard
Mounting Cutouts
L
O
A
D
L
I
N
E
.88
(22,35)
1 .97
(50,03)
.59
(15,0)
2 .00
(50,80)
Wide Band
.130 Dia .
(3,30)
2 Places
1 .575
(40,0)
.80
(20,32)
1 .16
(29,46)
SINGLE PHASE FILTERS
F5101CG (3, 6 and 10Amp) Dimensions with attached mounting plate
Refer to Page 41
for Standard
Mounting Cutouts
L
O
A
D
L
I
N
E
.26
(6,60)
2 .75
(69,85)
2 .85
(72,40)
.59
(15,0)
2 .00
(50,80)
.80
(20,32)
6-32 UNC-2B
6 Holes
1 .63
(41,40)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
29
F5200 RFI Filters
Ideal for Linear Power Supplies in Digital Equipment
Features:
• General Purpose Filter with Extended HighFrequency Insertion Loss Characteristics
• Effective Suppression of Incoming Common Mode
and Differential Mode Noise
• Low-Profile Package with Integral IEC Connector
• Available in 3 and 6Amp Ratings
3A
6A
Part
Number
E78454
Termination
Line/Load
F5200FG03
Fused IEC/
Solder Tab
F5200FG06
Fused IEC/
Solder Tab
F5200 Simplified Schematic
L
L
LOAD
Nominal
Current
Rating
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
1 .5A
6A
4A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1400VDC
Line to Line
1450VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
F: Fused IEC Receptacle
G: Wire Wrap/Solder
Maximum Leakage Current:
Each Line to Ground
F5200
115VAC, 60Hz:
0.25mA
250VAC, 60Hz:
0.50mA
Agency Approvals:
LINE
SINGLE PHASE FILTERS
Wide Band
Specifications:
G
N
N
F5200 SERIES
TYPICAL COMMON MODE
INSERTION LOSS — dB
(50 OHM CIRCUIT)
0
–20
–40
dB
–60
–80
–100
.01
30
www .curtisind .com
.1
1.0
10
FREQUENCY in MHz
Curtis Industries
A Division of Powers Holdings, Inc .
100
1000
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F5200FG (3 and 6Amp) Dimensions
Refer to Page 41
for Standard
Mounting Cutouts
L
O
A
D
L
I
N
E
1 .140
(28,95)
Max .
.59
(14,93)
Wide Band
2 .00
(50,80)
.20
(5,08)
2 .79
(17,86)
.125 (3,17) Dia. thru
.218 (5,53) Dia. x 120° C’Sink
2 Holes
1 .73
(43,94)
(1) 5mm x 20mm FUSE
(NOT INCLUDED)
1 .296
(32,91)
1 .26
(32,0)
SINGLE PHASE FILTERS
1 .42
(36,06)
F5201FG (3 and 6Amp) Dimensions with attached mounting plate
Refer to Page 41
for Standard
Mounting Cutouts
L
O
A
D
L
I
N
E
(1) 5mm x 20mm FUSE
(NOT INCLUDED)
.26
(6,60)
2 .75
(69,85)
2 .25
(57,15)
6-32 UNC-2B
6 Holes
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
2 .00
(50,8)
2 .85
(72,40)
1 .296
(32,92)
1 .140
(28,96)
Max
.59
(15,0)
1 .26
(32,0)
.06
(1,52)
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
31
F5500 RFI Filters
Wide Band
Specifications:
Ideal for Linear and Switching Power Supplies
• FCC and VDE Level “A” Applications
• High Inductance Single Coil Design Provides High
Common Mode and Differential Mode Performance
Above 150KHz
• High-Frequency Construction Techniques Maintain
>50dB Insertion Loss from 10MHz to 1GHz
• Compact, Space-Saving Package Available in 3, 6
and 10-Amp Ratings
F5500 Simplified Schematic
L
LOAD
L
LINE
SINGLE PHASE FILTERS
Features:
G
N
N
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
3A
6A
4A
10A
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1400VDC
Line to Line
1450VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
C: IEC Receptacle
G: Wire Wrap/Solder
Maximum Leakage Current:
Each Line to Ground
F5500
115VAC, 60Hz:
0.25mA
250VAC, 60Hz:
0.50mA
Agency Approvals:
E78454
Nominal
Current
Rating
Part
Number
Termination
Line/Load
3A
F5500CG03
IEC/
Solder Tab
6A
F5500CG06
IEC/
Solder Tab
10A
F5500CG10
IEC/
Solder Tab
F5500 SERIES
TYPICAL COMMON MODE
INSERTION LOSS — dB
(50 OHM CIRCUIT)
0
–20
–40
dB
–60
–80
–100
.01
32
www .curtisind .com
.1
1.0
10
FREQUENCY in MHz
Curtis Industries
A Division of Powers Holdings, Inc .
100
1000
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F5500CG (3, 6 and 10Amp) Dimensions
E
1 .575
(40,01) B
L
O
A
D
L
I
N
E
Wide Band
A
C
6-32 UNC-2B
2 Holes
.59
(15,0)
Refer to Page 40
for Standard
Mounting Cutouts
F5501CG (3, 6 and 10Amp) Dimensions
with attached mounting plate
6-32 UNC-2B
6 Holes
3 .25
(82,55)
.200
(5,08)
1 .375
(34,93)
.200
(5,08)
2 .75
(69,85)
Amps
A
B
C
D
E
3A
2 .000
(50,8)
2 .000
(50,8)
1 .500
(38,2)
.450
(11,4)
.565
(14,3)
6A
2 .88
(73,1)
2 .13
(54,1)
1 .500
(38,2)
.450
(11,4)
.565
(14,3)
10A
2 .88
(73,1)
2 .13
(54,1)
1 .500
(38,2)
.450
(11,4)
.565
(14,3)
L
O
A
D
L
I
N
E
.26
(6,60)
1 .75
(44,45)
B
A
.59
(15,0)
Refer to Page 41
for Standard
Mounting Cutouts
2 .850
(72,40)
.200
(5,08)
C
D
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
.750
(19,05)
SINGLE PHASE FILTERS
D
Curtis Industries
A Division of Powers Holdings, Inc .
.56
(14,2)
1-800-657-0853
33
F5600 RFI Filters
Features:
• Suited for FCC “B” and VDE “A” Switching Power
Supply Applications
• High Inductance, Multi-Stage Design with High
Common Mode and Differential Mode Insertion Loss
for Switching Power Supply Emissions
• >70dB Insertion Loss from 200KHz to 1GHz
• Compact, Space-Efficient Package Available in 3 and
6Amp Ratings
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
1 .5A
6A
4A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1400VDC
Line to Line
1450VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max at rated current
Humidity Range: 0% to 95% R .H .
Termination:
C: IEC Receptacle
F: Fused IEC Receptacle
G: Wire Wrap/Solder
Termination: Quick Connect
Maximum Leakage Current:
Each Line to Ground
F5600
115VAC, 60Hz:
0.50mA
250VAC, 60Hz:
1.20mA
Agency Approvals:
E78454
3A
6A
Part
Number
F5600 Simplified Schematic
Termination
Line/Load
F5600CG03
IEC/Solder Tab
F5600FG03
Fused IEC/
Solder Tab
F5600CG06
IEC/Solder Tab
F5600FG06
Fused IEC/
Solder Tab
L
L
LOAD
Nominal
Current
Rating
LINE
SINGLE PHASE FILTERS
Wide Band
Specifications:
G
N
N
F5600 SERIES
TYPICAL COMMON MODE
INSERTION LOSS — dB
(50 OHM CIRCUIT)
0
–20
–40
dB
–60
–80
–100
.01
34
www .curtisind .com
.1
1.0
10
FREQUENCY in MHz
Curtis Industries
A Division of Powers Holdings, Inc .
100
1000
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F5600CG (3 and 6Amp) Dimensions
.565
(14,3)
1 .575
(40,01)
2 .13
(54,10)
L
O
A
D
L
I
N
E
6-32 UNC-2B
2 Holes
Wide Band
1 .50
(38,10)
2 .88
(73,15)
.59
(15,0)
Refer to Page 40
for Standard
Mounting Cutouts
F5601CG (3 and 6Amp) Dimensions with attached mounting plate
6-32 UNC-2B
6 Holes
3 .25
(82,55)
.2000
(5,08)
1 .375
(34,93)
.200
(5,08)
2 .75
(69,85)
Refer to Page 41
for Standard
Mounting Cutouts
L
O
A
D
L
I
N
E
.26
(6,60)
2 .13
1 .750
(54,10) (44,45)
2 .88
(73,15)
.59
(15,0)
.750
(19,05)
2 .850
(72,40)
SINGLE PHASE FILTERS
.45
(11,43)
.200
(5,08)
1 .50
(38,2)
.56
(14,2)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
35
F5700 RFI Filters
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
2A
6A
4A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1400VDC
Line to Line
1450VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
C: IEC Receptacle
G: Wire Wrap/Solder
Features:
• Ideal for VDE “B” and MIL-STD-461 Switching Power
Supply Applications
• Very High Inductance Design with Differential Mode
Choke to Provide Improved Performance Below
100KHz
• Wide-Band Insertion Loss >60dB from 10MHz to 1GHz
• Compact, Space-Efficient Package Available in 3 and
6Amp Ratings
F5700 Simplified Schematic
LOAD
G
N
N
Maximum Leakage Current:
Each Line to Ground
F5700
115VAC, 60Hz:
0.50mA
250VAC, 60Hz:
1.20mA
Agency Approvals:
E78454
Nominal
Current
Rating
L
L
LINE
SINGLE PHASE FILTERS
Wide Band
Specifications:
Part
Number
Termination
Line/Load
3A
F5700CG03
IEC/
Solder Tab
6A
F5700CG06
IEC/
Solder Tab
F5700 SERIES
TYPICAL COMMON MODE
INSERTION LOSS — dB
(50 OHM CIRCUIT)
0
–20
–40
dB
–60
–80
–100
.01
36
www .curtisind .com
.1
1.0
10
FREQUENCY in MHz
Curtis Industries
A Division of Powers Holdings, Inc .
100
1000
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F5700CG (3 and 6Amp) Dimensions
.34
(8,63)
.640
(16,25)
1 .575
(40,01)
2 .25
(57,15)
L
O
A
D
L
I
N
E
Wide Band
1 .75
(44,45)
6-32 UNC-2B
2 Holes
.59
(15,0)
Refer to Page 40
for Standard
Mounting Cutouts
SINGLE PHASE FILTERS
45 .0
(11,43)
3 .75
(94,25)
F5701CG (3 and 6Amp) Dimensions with attached mounting plate
6-32 UNC-2B
6 Holes
.200
(5,08)
L
O
A
D
L
I
N
E
3 .25
(82,55)
13 .75
(34,93)
.200
(5,08)
2 .75
(69,85)
.26
(6,60)
3 .75
(95,25)
2 .25
(57,15)
2 .85
(72,40)
1 .75
(44,45)
.750
(19,05)
.59
(15,0)
.200
(5,08)
1 .75
(44,45)
Refer to Page 41
for Standard
Mounting Cutouts
.48
(12,19)
.45
(11,43)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
37
F5900 RFI Filters
Specifications:
Wide Band
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
1 .5A
6A
4A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VDC
Line to Line
1450VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max . at rated current
Humidity Range: 0% to 95% R .H .
Termination:
C: IEC Receptacle
F: Fused IEC
G: Wire Wrap/Solder
J: Switched IEC
Maximum Leakage Current:
Each Line to Ground
F5900
115VAC, 60Hz:
0.50mA
250VAC, 60Hz:
1.20mA
Agency Approvals:
• High Performance Filter Designed for Switching
Power Supply Emissions
• >70dB Insertion Loss from 200KHz to 1GHz
• Integral Power Switch and 5 x 20mm Fuse Holder
• Available in 3 and 6Amp Versions with Optional
Mounting Faceplates
E78454
F5900 Simplified Schematic with Switch
F5900 Simplified Schematic without Switch
L
N
N
L
LOAD
G
LINE
L
LOAD
L
LINE
SINGLE PHASE FILTERS
Features:
G
N
N
F5900 SERIES
TYPICAL COMMON MODE
INSERTION LOSS — dB
(50 OHM CIRCUIT)
0
–20
–40
dB
–60
–80
–100
.01
38
www .curtisind .com
.1
1.0
10
FREQUENCY in MHz
Curtis Industries
A Division of Powers Holdings, Inc .
100
1000
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F5900CG
.59
(14,98)
(3 and 6Amp)
Dimensions
.45
(11,43)
L O A D
2 .49
(63,24)
Max .
Refer to Page 42
for Standard
Mounting Cutouts
L I N E
8-32 UNC-2B
4 Holes
1 .332
(33,83)
F5900FG (3 and 6Amp) Dimensions
.299
(75,94)
Refer to Page 42 for Standard Mounting Cutouts
.45
(11,43)
3 .02
(76,70)
Max .
.59
(14,93)
1 .93
(49,02)
Max .
Nominal
Current
Rating
3A
2 .55
(64,77)
Max .
L I N E
1 .300
(33,02)
6-32 UNC-2B
6 Holes
1 .300
(33,02)
.200
.800
(5,08) (20,32)
6A
3 .00
(76,20)
.450
(11,43)
Part
Number
Termination
Line/Load
F5900CG03
IEC/Solder Tab
F5900FG03
Fused IEC/Solder Tab
F5900JG03
Switched IEC/Solder Tab
F5900CG06
IEC/Solder Tab
F5900FG06
Fused IEC/Solder Tab
F5900JG06
Switched IEC/Solder Tab
3 .02
(76,70)
Max .
.59
(14,98)
1 .93
(49,02)
Max .
SINGLE PHASE FILTERS
L O A D
3 .87
(98,29)
.840
(21,33)
3 .02
(76,70)
Max
Wide Band
1 .93
(49,02)
Max .
1 .312
(33,32)
± .016
L O A D
1 .875
(47,49)
.200
(5,08)
.800
(20,32)
2 .55
(64,77)
Max .
L I N E
(1) 5mm x 20mm Fuse
(not included)
3 .87
(98,29)
F5900JG
(3 and 6Amp)
Dimensions
Refer to Page 42
for Standard
Mounting Cutouts
(1) 5mm x 20mm Fuse
(not included)
1 .300
(33,02)
6-32 UNC-2B
6 Holes
1 .300
(33,02)
2 .00
.800
(50,80) (20,32)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
3 .00
(76,20)
1 .875
(47,49)
Curtis Industries
A Division of Powers Holdings, Inc .
.800
(20,32)
2 .00
(50,80)
1-800-657-0853
39
Standard Mounting Cutouts
F1200CA, F1250CA, F1299CA,
F1300CA, F1399CA, F1400CA,
F1500CA, F1600CA, F1700CA
F1500FA, F1600FA,
.638
(16,21)
1 .20
(30.5)
.187
(4,75)
.140 Dia .
(3,55)
2 Holes
.90
(22,9)
1 .575
(40,0)
.234
(5,94)
✱ .09 R
(2,29)
.140 Dia .
(3,55)
2 Holes
1 .275
(32,39)
1 .145
(29,08)
✱ for mounting
from back side
1 .417
(36,0)
.450
(11,43)
SINGLE PHASE FILTERS
How to Order
The Curtis part numbering system is made up of four
elements. Each element denotes a specific requirement
(mechanical or electrical) which, when properly
sequenced, fully identifies the required catalog filter. As
shown, the first five alpha/numeric characters denote
the series type; the sixth character (alpha) denotes the
type of line termination; the seventh character (alpha)
denotes the type of load termination; the last two
characters (numeric) denote the current rating.
Compose your part number as follows: Select the series
required, add two alpha character for the line and load
termination, followed by two numeric characters for
the required current rating . For example, F1100AB06
completely identifies an F1100 series filter with quick
connects on line side and wire leads on load side, with
a 6-amp rating.
F1100
X
X
SERIES
LINE TERMINATION
A = Quick Connects
B = Wire Leads
C = IEC Connector
D = Screw Terminals
(20 & 30 amp only)
F = Fused IEC
P = Printed Circuit Pins
W= Dual Fused IEC
J = Switched IEC
40
www .curtisind .com
LOAD
TERMINATION
A = Quick Connects
B = Wire Leads
D = Screw Terminals
(20 & 30 amp only)
P = Printed Circuit Pins
G= Solder Tab
X
CURRENT
RATING
01 = 1 Amp
03 = 3 Amps
06 = 6 Amps
10 = 10 Amps
15 = 15 Amps
20 = 20 Amps
30 = 30 Amps
F1300CP, F1350CP, F1600CP
.600
(15,2)
1 .500
(38,1)
N
.700
(17,8)
1 .400
(35,6)
.062 Hole Dia .
(1,57)
5 Holes
L
F5500/5600/5700 SERIES
1 .575
(40,01)
.90
(22,8)
.140 Dia .
(3,55)
2 Holes
.234 R .
(5,94)
(Typ.)
Curtis Industries
A Division of Powers Holdings, Inc .
1 .20
(30,48)
Specifications subject to change.
Dimensions are shown for
reference purposes only .
F5100 SERIES
F5200, F5600FG SERIES
1 .575
(40,01)
1 .420
(36,06)
± .004
.410
(10,41)
.820
(20,83)
.140 Dia .
(3,56)
2 Holes
.637
(16,18)
1 .20
(30,48)
.032 R .
(,81)
Max .
F5101 SERIES
.500
(12,7)
1 .000
(25,4)
F5201, F5601FG SERIES
2 .35
(59,69)
2 .350
(59,69)
.25 R .
(6,35)
(Typ.)
1 .375
(34,93)
.467
(11,86)
.612
(15.54)
.12 R .
(3,05)
(Typ.)
.465
(11,81)
1 .000
(25,4)
.930
(23,62)
2 .000
(50,8)
1 .000
(25,4)
.500
(12,70)
1 .000
(25,4)
.12 R .
(3,05)
(Typ.)
.875
(22,23)
1 .425
(36,20)
.925
(23,50)
.09 R .
(2,29)
(Typ.)
1 .400
(35,56) .925
(23,50)
1 .812
(46,02)
.25 R
(6,35)
(Typ.)
.250
(6,35)
.700
(17,78)
.156 R .
(3,96)
(Typ.)
1 .062
(26,97)
.269
(6,83)
2 .000
(50,80)
(3,96)
6 Holes
1 .417
(36,0)
.156 Dia .
(3,96)
6 Holes
.612
(15.54)
.150 Dia .
(3,81)
6 Holes
F5501/5601CG/5701
SERIES
.156 Dia .
1 .145
(29,08)
+ .012
–.000
.57
(14,47)
.375
(9,53)
SINGLE PHASE FILTERS
1 .575
(40,0)
.787
(2,0)
.140 Dia .
(3,55)
2 Holes
1 .275
(32,38)
+ .012
–.000
1 .175
(29,85)
.930
.465 (23,62)
(11,81)
1 .175
(29,85)
1 .750
(44,45)
2 .850
(72,39)
NOTE: Tolerance for all dimensions unless otherwise specified: .XXX three place ± .004, .XX two place ± 0 .10
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
Curtis Industries
A Division of Powers Holdings, Inc .
1-800-657-0853
41
Standard Mounting Cutouts
F5900FG
.800
(20,32)
1 .812
(46,02)
1 .875
(47,62)
2 .600
(66,04)
1 .062
(26,97)
.906
(23,01)
.531
(13,48)
.09 R .
(2,28)
(Typ.)
.156 Dia .
(3,96)
6 Holes
F5900CG
.334
(8,48)
.550
(12,70)
.25 R .
(6,35)
(Typ.)
1 .300
(33,02)
.156 R .
(3,96)
(Typ.)
.330
(8,38)
SINGLE PHASE FILTERS
.800
(20,32)
.700
(17,78)
1 .400
(35,56)
2 .00
(50,80)
1 .332
(33,78)
1 .00
(25,40)
.12 R .
(3,04)
(Typ.)
.930
(23,62)
.187 Dia .
(4,75)
4 Holes
F5900JG
.800
(20,32)
1 .875
(47,62)
1 .062
(26,97)
.465
(11,81)
1 .312
(33,32)
.656
(16,66)
.800
(20,32)
1 .812
(46,02)
.906
(23,01)
.531
(13,48)
.330
(8,38)
.156 Dia .
(3,96)
6 Holes
.09 R .
(2,28)
(Typ.)
.156 R .
(3,96)
(Typ.)
.480
(12,19)
.960
(24,38)
2 .600
(66,04)
1 .300
(33,02)
.700
(17,78)
1 .400
(35,56)
2 .600
(66,04)
NOTE: Tolerance for all dimensions unless otherwise specified: .XXX three place ± .004, .XX two place ± 0 .10
42
www .curtisind .com
Curtis Industries
A Division of Powers Holdings, Inc .
Specifications subject to change.
Dimensions are shown for
reference purposes only .
POWER ENTRY MODULES
]
General Purpose
Combination
Curtis Industries
A Division of Powers Holdings, Inc.
43
F2199/F2200 RFI Filters
• General Purpose Filters — Designed for Common
Mode Emissions or Susceptibility Applications
• Integral IEC Connector in Space-Efficient Package
F2199/F2200 Simplified Schematic
Specifications:
L
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
1A
1A
3A
3A
6A
6A
10A
8A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max. at rated current
Humidity Range: 0% to 95% R.H.
Termination:
A: QC – Quick Connect
C: IEC Receptacle
Maximum Leakage Current:
Each Line to Ground
F2199/F2200
115VAC, 60Hz:
0.25mA
250VAC, 50Hz:
0.40mA
Agency Approvals:
LOA D
L
G
N
N
F2200CA (1, 3 and 6Amp) Dimensions
.881
(22,4)
1.575 1.98
(40,0) (50,29)
Max.
L
I
N
E
L
O 1.145
A (29,08)
D
1.555
(39,5)
.550
(13,97)
.133 Dia.
(3,38)
2 Holes
POWER ENTRY MODULES
Refer to Page 58
for Standard
Mounting Cutouts
• Ideal for Linear Power Supplies in Digital Equipment
LIN E
General Purpose Filtered Modules
Features:
.250 QC
(6,4)
.805
(20,45)
F2199CA (1, 3, 6 and 10Amp) Dimensions
20.80max
(0.819)
Ø6.6
(0.26)
90°CS
40.00+.35
(1.575+.014)
Nominal
Current
Rating
1A
3A
6A
10A
Ø3.35
(0.132)
54.50max
(2.146)
6.35(0.25) faston terminal with
Ø1.78(0.070) hole (slotted hole for ground)
Part
Number
Termination
Line/Load
28.2max
(1.110)
50.30max
(1.980)
E78454
73780 72031376
099523 72102892
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
.50
Frequency - MHz
1.0
5.0
10
30
F2199CA01
IEC/QC
Common
Differential
32
5
45
14
45
23
43
47
43
50
40
45
F2200CA01
IEC/QC
Common
Differential
22
—
35
2
40
3
46
35
50
40
50
40
F2199CA03
IEC/QC
Common
Differential
20
5
30
12
38
14
48
38
48
44
44
42
F2200CA03
IEC/QC
Common
Differential
15
—
25
2
30
3
45
35
50
40
50
40
F2199CA06
IEC/QC
Common
Differential
9
5
20
12
28
14
42
33
50
42
47
42
F2200CA06
IEC/QC
Common
Differential
9
—
20
2
25
7
41
28
45
46
50
57
F2199CA10
IEC/QC
Common
Differential
3
5
13
12
20
16
35
20
40
28
45
40
NOTE: Other combinations of terminals may be specified on special order.
44
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
F2300 RFI Filters
Specifications:
Features:
• Effective Protection from Pulsed, Intermittent or
Continuous RFI for FCC “A” Applications
• High-Performance Low-Leakage Filter in Low Profile
Package with Integral IEC Connector
• Increased Inductance and Line-to-Line Capacitance
Provide Enhanced Common Mode and Differential
Mode Attenuation
E78454
General Purpose Filtered Modules
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
6A
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max at rated current
Humidity Range: 0% to 95% R.H.
Termination:
A: QC – Quick Connect
C: IEC Receptacle
Maximum Leakage Current:
Each Line to Ground
F2300
115VAC, 60Hz:
0.25mA
250VAC, 50Hz:
0.40mA
Agency Approvals:
064179 72031376
L
LOAD
LINE
L
POWER ENTRY MODULES
F2300CA Simplified Schematic
G
N
N
.881
(22,4)
F2300CA
(6Amp)
Dimensions
L
I
N
E
1.575 1.980
(40,0) (50,29)
Max.
Refer to Page 58
for Standard
Mounting Cutouts
6A
Part
Number
Termination
Line/Load
F2300CA06
IEC/QC
1.180
(29,9)
2.910
(73,9)
.133 Dia.
(3,38)
2 Holes
Nominal
Current
Rating
L
O
A
D
.550
(14)
.805
(20,45)
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
Common
Differential
.15
.50
25
12
37
30
Frequency - MHz
1.0
5.0
45
50
45
65
10
30
45
65
45
60
NOTE: Other combinations of terminals may be specified on special order.
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
45
Features:
• Higher Performance Filters Designed for Common
Mode and Differential Mode Applications
• 4X Greater Differential Mode Insertion Loss at
1 MHz than F2199/F2200 Series with No Increase in
Physical Size
• Especially Suited for Use with Linear Power Supplies
and FCC “A” Applications
F2400/2500 Simplified Schematic
L
LOAD
L
LINE
POWER ENTRY MODULES
General Purpose Filtered Modules
F2400/2500 RFI Filters
G
N
N
Specifications:
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
1.5A
6A
3A
10A
10A
15A
10A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max. at rated current
Humidity Range: 0% to 95% R.H.
Termination:
A: QC – Quick Connect
C: IEC Receptacle
Maximum Leakage Current:
Each Line to Ground
F2400/F2500
115VAC, 60Hz:
0.25mA
250VAC, 50Hz:
0.40mA
Agency Approvals:
E78454
Nominal
Current
Rating
Part
Number
3A
F2400CA03
F2500CA03
IEC/QC
IEC/QC
6A
F2400CA06
F2500CA06
10/15A
F2400CA10
F2400CA15
Termination
Line/Load
73780
(10/15A
Only)
72031376
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
Frequency - MHz
1.0
5.0
.15
.50
10
30
Common
Differential
22
8
35
18
40
24
46
40
50
50
50
40
IEC/QC
IEC/QC
Common
Differential
15
8
24
18
31
24
42
40
45
50
50
40
IEC/QC
IEC/QC
Common
Differential
4
2
10
8
13
15
28
30
35
35
40
35
NOTE: Other combinations of terminals may be specified on special order.
46
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
F2400CA (3, 6, 10 and 15Amp) Dimensions
1.38
(35,1)
1.99
(50,5)
L
I
N
E
L
O
A
D
General Purpose Filtered Modules
1.575
(40,0)
1.18
(29,5)
1.81
(46,0 )
Ø .13
(3,3)
Refer to Page 58
for Standard
Mounting Cutouts
1.95
(49,5)
.88
(22,4)
.83
(22,8)
.250 QC
(6,4)
1.575
(40,0)
1.980
(50,29)
Max.
L
I
N
E
L
O 1.16
A (29,5)
D
1.575
(40,0)
.133 QC
(3,38)
2 Holes
POWER ENTRY MODULES
F2500CA (3 and 6Amp) Dimensions
.250 QC
(6,4)
.650
(16,5)
.790
(20,1)
Refer to Page 58
for Standard
Mounting Cutouts
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
47
F2600 RFI Filters
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
3A
6A
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max at rated current
Humidity Range: 0% to 95% R.H.
Termination:
A: QC – Quick Connect
F: Fused IEC
J: Switched IEC
P: PCB Pins
W: Dual Fused IEC
Maximum Leakage Current:
Each Line to Ground
F2600
115VAC, 60Hz:
0.25mA
250VAC, 50Hz:
0.40mA
Agency Approvals:
Features:
• General Purpose “L-Type” Circuit Effective in
Reducing Both Incoming and Outgoing Powerline
Noise Levels in FCC “A” Applications
• Integral 5 X 20mm Single or Dual Fused IEC
Connector
• Optional SST Switched IEC Connector
• All Series Available in Labor-Saving PC Mounted
Case Style
E78454
064179 72031310
F2600F Simplified Schematic
L
LOAD
L
LINE
POWER ENTRY MODULES
General Purpose Filtered Modules
Specifications:
G
N
Nominal
Current
Rating
Part
Number
3A
F2600FA03
F2600FP03
Fused IEC/QC
Fused IEC/PC
6A
F2600FA06
F2600FP06
3A
N
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
Termination
Line/Load
MODE
Frequency - MHz
1.0
5.0
.15
.50
10
30
Common
Differential
21
8
35
18
41
24
50
40
50
50
50
40
Fused IEC/QC
Fused IEC/PC
Common
Differential
18
8
34
18
41
24
45
40
45
50
45
50
F2600WA03
F2600WP03
Dual Fused IEC/QC
Dual Fused IEC/PC
Common
Differential
21
8
35
18
41
24
45
40
45
50
50
40
6A
F2600WA06
F2600WP06
Dual Fused IEC/QC
Dual Fused IEC/PC
Common
Differential
18
8
34
18
41
24
40
40
40
50
45
50
3A
F2600JA03
F2600JP03
Switched IEC/QC
Switched IEC/PC
Common
Differential
21
8
35
18
41
24
45
40
45
50
50
40
6A
F2600JA06
F2600JP06
Switched IEC/QC
Switched IEC/PC
Common
Differential
18
8
34
18
41
24
40
40
40
50
45
50
NOTE: Other combinations of terminals may be specified on special order.
48
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
F2600FA (3 and 6Amp) Dimensions
.20
(5,0)
L
O
A
D
1.140
(28,9)
2.000
(50,8)
1.730
(43,9)
Refer to Page 58
for Standard
Mounting Cutouts
.550
(13,9)
L
I
N
E
.20
(5,0)
1.260
(32,0)
1.296
(32,9)
.200 REF
(5,0)
2.20
(55,9)
1.730
(43,9)
2.75
(69,8)
1.140
(28,9)
1.260
(32,0)
1.296
(32,9)
LOAD
1.420
(36,0)
1.420
(36,0)
(1) 5mm x 20mm Fuse
(not included)
.210
(5,3)
F2600WA (3 and 6Amp) Dimensions
L
I
N
E
F2600W Simplified Schematic
L
G
N
N
2.000
(50,8)
1.8
(5,0) Max.
1.140
(28,9)
.550
(13,9)
POWER ENTRY MODULES
LOAD
LINE
L
L
O
A
D
2.75
(69,8)
1.736
(44,0)
1.260
(32,0)
1.339
(34,0)
1.420
(36,0)
(2) 5mm x 20mm Fuses
(not included)
F2600JA (3 and 6Amp) Dimensions
L
I
N
E
F2600J Simplified Schematic
L
LOAD
LINE
L
G
N
N
.17
(5,0)
L
O
A
D
2.000
(50,8)
.550
(13,9)
1.260
(32,0)
1.339
(34,0)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
1.140
(28,9)
2.75
(69,8)
1.736
(44,0)
1.420
(36,0)
General Purpose Filtered Modules
L
I
N
E
F2600FP (3 and 6Amp) Dimensions
SPST Switch
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
49
F2700 RFI Filters
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
2A
6A
4A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max. at rated current
Humidity Range: 0% to 95% R.H.
Termination:
A: QC – Quick Connect
B: Wire
C: IEC Receptacle
F: Fused IEC
Maximum Leakage Current:
Each Line to Ground
F2700
115VAC, 60Hz:
0.25mA
250VAC, 50Hz:
0.40mA
Agency Approvals:
Features:
E78454
064179 72031308
F2700 Without Switch or Fuse Simplified Schematic
L
LOAD
L
LINE
• Designed for FCC “B” and VDE “B”
Switching Power Supply Applications
• Very High Inductance Design with
Differential Mode Choke to Provide
Improved Performance Below 100KHz
• Compact, Space-Efficient Package Available
in 3 and 6Amp Ratings
• Also Available with Integal Fused IEC
Connector and “ON/OFF” Power Switch
G
N
N
F2700 With Switch and Fuse Simplified Schematic
L
LOAD
L
LINE
POWER ENTRY MODULES
General Purpose Filtered Modules
Specifications:
G
N
N
Nominal
Current
Rating
3A
6A
Part
Number
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
Termination
Line/Load
MODE
.01
.02
Frequency - MHz
.05
.15
.50
1.0
5.0
10
30
F2700AA03
QC/QC
Common
Differential
20
5
27
27
36
52
45
70
42
70
42
70
42
70
40
60
38
58
F2700CA03
F2700FB03
IEC/QC
Fused IEC/Wire
Common
Differential
20
5
27
27
36
52
45
70
42
70
42
70
42
70
40
60
38
58
F2700AA06
F2700CA06
QC/QC
IEC/QC
Common
Differential
10
5
18
20
28
48
39
70
42
70
45
70
45
70
45
70
45
65
NOTE: Other combinations of terminals may be specified on special order.
50
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
F2700AA (3 and 6Amp) Dimensions
A
D
L
O
A
D
L
I
N
E
F
B
E
F
C
.250 QC
(6,4)
Amps
A
B
C
D
E
F
3A
3.315
(84,2)
2.000
(50,8)
1.500
(38,1)
2.940
(74,7)
2.500
(63,5)
.550
(14,0)
6A
4.440
(112,8)
2.250
(57,2)
1.750
(44,5)
4.063
(103,2)
3.620
(91,9)
.550
(14,0)
F2700FB03 (3Amp) Dimensions
2.130
(54,10)
5mm x 20mm FUSE
(NOT INCLUDED)
3.020
(76,7)
Max.
POWER ENTRY MODULES
Refer to Page 58
for Standard
Mounting Cutouts
.294
(7,46)
(2) 8-32 x .3 UNC2B
1.312
(33,32)
L
O
A
D
L
I
N
E
2.490
(63,29)
Max.
1.930
(49,02)
Max.
General Purpose Filtered Modules
.188 Dia.
(4,77)
2 Holes
5.00 Min.
(Typ.)
No. 18 Gauge Wire
F2700CA (3 and 6Amp) Dimensions
E
L
O
A
D
L
I
N
E
(2) 6-32 UNC2B
A
C
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
B
D
.250 QC
(6,4)
Refer to Page 58
for Standard
Mounting Cutouts
Amps
A
B
C
D
E
3A
2.880
(73,2)
2.125
(54,0)
1.719
(43,6)
.550
(14,0)
.575
(14,6)
6A
3.750
(95,2)
2.250
(57,1)
1.750
(44,4)
.550
(14,0)
.640
(16,29)
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
51
FPE7/FPE8 Series
Specifications:
POWER ENTRY MODULES
Combination
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
3A
6A
6A
Current Overload: 6X for 8 Seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max. at Rated Current
Humidity Range: 0% to 95% R.H.
Termination:
• IEC Receptacle
• Wire Wrap/Solder
Maximum Leakage Current:
Each Line to Ground
PE7, PE 8, PE9
115VAC, 60Hz:
0.25mA
250VAC, 50Hz:
0.40mA
Voltage Select Card: Installed in 120VAC position
unless otherwise specified
Agency Approvals:
E78454
Features:
064179 72031305
Refer to Page 55 for Ordering Instructions
• RFI Filter Module Combines IEC Connector, Fusing,
and Voltage Select Features in One Unit
• FPE7 Series Filters Provide 20% More Differential
Mode Attenuation Than Comparable Units
• Accepts Either U.S. or European Standard Fuse Sizes
FPE7 Series Simplified Schematic
FUSING
LINE
G
L
SERIES-SERIES
110-220240 V
VOLTAGE
SELECTOR
1-POLE
B
A
a
b
G
FOR TRANSFORMERS WITH TAP
LOAD
C
A
C
240V
220V
c
D
D
N
Voltage Contacts
110V
b,e
220V
b,c
240V
a
d
H
F
E
e
2-POLE
E
F
2a
110V
G
Nominal
Current
Rating
Part
Number
LINE
L
Termination
Line/Load
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
FUSING
MODE
1-POLE
100-120220-240 V
VOLTAGE
SELECTOR
G
B
3A
FPE7XXX03
FPE8XXX03
G
IEC/Solder
Tabs
Common
Differential
6A
FPE7XXX06
N
FPE8XXX06
IEC/Solder
Tabs
Common
H
Differential F
LOAD
.50
.15
a
b
c
A
18
8
C
A
C24
SERIES-PARALLEL
Frequency
- MHz
FOR TRANSFORMERS
WITH TWO SEPARATE
WINDINGS
1.0
5.0
10
120V
100V
18
D
D
d
e
2-POLE
10
8
E
19
E
18
120V
F
G
52
www.curtisind.com
LINE
L
Curtis Industries
G
B
a
A
B
A
Voltage Contacts
100V 39 a,c,e
120V
39 b,c,e
220V
a,d
240V
b,d
SERIES-PARALLEL
LOAD
115-230 V
VOLTAGE
SELECTOR
1-POLE
24
24
45
46
45
50
50
40
44
40
50
40
Specifications subject to change.
Dimensions are shown for
reference purposes only.
A Division of Powers Holdings, Inc.
FUSING
30
24
30
FOR TRANSFORMERS WITH TWO SEPARATE
WINDINGS
115V
NL
e
F
2-POLE
b
G
E A
F C
2a
D
G
a
C
c
D
d
H
N
E
e
F
FUSING
FPE7 Series Simplified Schematic
G
L
B
A
b
G
FUSING
LINE
1-POLE
HG
NL
C
D
B
F
e
2-POLE
a
SERIES-PARALLEL
LOAD
b
G
100V
FOR TRANSFORMERS WITH TWO SEPARATE
Voltage Contacts
WINDINGS
D
E
A
120V
E A
F C
C
120V
100V
c
GD
D
d
H
N
120V
E
e
F
E
F
2-POLE
G
FUSING
LINE
G
L
B
b
G
FUSING
LINE
1-POLE
HG
NL
C
c
115-230 V
VOLTAGE
SELECTOR
d
D
B
F
2-POLE
e
a
b
G
115V
SERIES-PARALLEL
LOAD
D
E
B
E A
F C
A
C
Voltage Contacts
100V
a,c,e
120V
b,c,e
220V
a,d
240V
b,d
FOR TRANSFORMERS WITH TWO SEPARATE
WINDINGS
B
A
C
A
a
a,c,e
b,c,e
a,d
b,d
FOR TRANSFORMERS WITH TWO SEPARATE
Voltage Contacts
WINDINGS
115V
115V
115V
230V
a,b d,e
c
Combination
1-POLE
100V
120V
220V
240V
SERIES-PARALLEL
LOAD
115-230 V
VOLTAGE
SELECTOR
Voltage Contacts
110V
b,e
220V
b,c
240V
a
120V
A
C
c
100-120220-240 V
VOLTAGE
SELECTOR
d
b,c
a
FOR TRANSFORMERS WITH TWO SEPARATE
WINDINGS
LOAD
a
220V
240V
SERIES-PARALLEL
G
100-120220-240 V
VOLTAGE
SELECTOR
1-POLE
110V
E
F
2a
2-POLE
LINE
220V
c
GD
D
d
H
N
e
E
E
F
2-POLE
Voltage Contacts
115V
a,b d,e
230V
c
POWER ENTRY MODULES
FPE8 Series Simplified Schematic
F
115V
G
LINE
ROCKER
SWITCH
FUSING
1-POLE
G
L
1-POLE
1
1a
LOAD
L
G
H
N
2-POLE
2
2a
N
2-POLE
G
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
53
FPE7/FPE8 Series (continued)
FPE7/FPE8
Snap-Mount Series
(3 and 6Amp) Dimensions
Refer to Page 55
for Standard
Mounting Cutouts
1.260
(32,0)
2.266
(57,55)
1.051
(26,70)
.22
(5,5)
POWER ENTRY MODULES
Combination
2.283
(58,0)
LI NE
.100
(2,7) Q.C. Terminals All Locations
LOAD
1.091
(27,71)
FPE7/FPE8
Screw-Mount Series
(3 and 6Amp) Dimensions
1.969
(50,0)
Refer to Page 55
for Standard
Mounting Cutouts
2.266
(57,55)
1.575
(40,0)
.22
(5,5)
1.051
(26,70)
1.142
(29,0)
2.283
(58,0)
LINE
54
www.curtisind.com
.126
(3,20)
Dia. Holes
.100
(2,7) Terminals Except Switch
Curtis Industries
A Division of Powers Holdings, Inc.
L OAD
1.091
(27,71)
Specifications subject to change.
Dimensions are shown for
reference purposes only.
How to Order
FPE7
FPE8
X
X
X
X
X
SERIES
FPE= Power Entry
CURRENT RATING
3 = 3 AMP
6 = 6 AMP
OPTIONS
(Consult Factory)
0 = Standard Units
SWITCH
0 = No Switch
1 = SPST Rocker Switch
w/Q.C.
2 = DPST Rocker Switch
w/Q.C.
VOLTAGE SELECTOR
0 = No Selector (FPE80 Series)
1 = 110-220-240 VAC
2 = 100-120-220-240 VAC
3 = 115-230 VAC
2.20
(55,9)
1.10
(27,9)
2.20
(55,9)
1.575
(40,0)
1.122
(28,50)
1.122
(28,50)
*Panel Thickness
FPE7/FPE8 Screw Mount Series
.08 R
(2,0)
*See Below
FPE7/FPE8
To change fuse, remove power cord
and open the front cover on the module.
Remove fuse holder and replace fuse.
Reinsert fuse holder and close cover.
To change the operating voltage on the
FPE7 Series, remove the power cord
and open front cover. Rotate voltage
select wheel until desired voltage
appears in window of cover.
• Filter shipped without fuse.
Always use caution when selecting
and changing fuses and voltage
requirements. Curtis Industries is not
responsible for malfunction due to
improper installation/selection of fuse
and/or voltage select.
Cutout
.031" - .079" use 2.20"
.080" - .125" use 2.22"
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
POWER ENTRY MODULES
FPE7/FPE8 Snap-Mount Series
INSTALLATION INSTRUCTION
IMPORTANT – CHANGING
FUSE/VOLTAGE
Combination
MOUNTING
METHOD & FUSING
0 = Snap Mount Metric Fuse
1 = Snap Mount US Fuse
2 = Snap Mount 2 Metric Fuses
3 = Snap Mount 2 US Fuses
6 = Screw Mount Metric Fuse
7 = Screw Mount U.S. Fuse
8 = Screw Mount 2 Metric Fuses
9 = Screw Mount 2 U.S. Fuses
4-40
(M3)
.08 R
(2,0)
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
55
FPE1 Series
E78454
3
4
064179 72031202
FUSING
1 POLE
1
LINE
2
L
3
4
N
N
2 POLE
G
G
FPE1 Series Simplified Schematic with Voltage Selector
FUSING
1 POLE L
L
1
N
FPE1XXXP0
G
2 POLE
MODE
.05
.15
1
IEC/QC
Common
Differential
10
10
202
IEC/QC
Common
Differential
13
10
4
24
20
NOTE: Other combinations of terminals may be specified on special order.
www.curtisind.com
LOAD
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
L
LOAD
FPE1XXX10
L IN E
10A
1 POLE
110V
4
2 POLE
G
Part
Termination
Number FUSING Line/Load
L
3
N
G
Nominal
Current
Rating
110V
2
N
56
2
2 POLE
G
G
L
FPE1 Series Simplified
Schematic without Voltage Selector
1
LOAD
• RFI Filter Module Combines IEC Connector, Fusing,
Optional Voltage Select and On/Off Switch into a
Single, Space-Efficient Assembly
• Enhanced Low Frequency Response with No
Resonant Peaks
• Fully Shielded for Radiative Noise Control
• Accepts Either U.S. or European Standard Fuse
Sizes. Dual or Single Power Line Fusing
LINE
Features:
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
10A
10A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
2250VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max at rated current
Humidity Range: 0% to 95% R.H.
Termination:
• QC – Quick Connect
• IEC Receptacle
Maximum Leakage Current:
FUSING
Each Line to Ground
PE1
PE1-PO1 POLE
L
0.25mA
0.4mA
L 115VAC, 60Hz:
250VAC, 50Hz:
0.40mA
.75mA
Voltage Select Card: Installed in 120VAC position
unless otherwise specified
N
N
Agency Approvals:
LIN E
POWER ENTRY MODULES
Combination
Specifications:
20
3
N
Frequency - MHz
.50
1.0
5.0
10
30
30
30
38
35
45
55
50
60
50
55
33
30
38
35
48
65
54
65
54
55
G
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
1
1
FPE1
1.99
(50,5)
(10Amp)
Dimensions
L
I
N
E
Refer to Standard
Mounting Cutouts on
Page 58
L
O
A
D
2.41
(61,2)
Max.
1.12
(28,4)
3.00
(76,2)
2.58
(65,5)
Max.
1
3
2
1.15
(29,2)
Max.
3.20
(81,3)
WITH
VOLTAGE
SELECTOR
How to Order
FPE1
X
X
X
X
X
SERIES
FPE= Power Entry
CURRENT RATING
0 = 10 AMP
OPTIONS
(Consult Factory)
1 = Standard Units
P = High Performance Insertion Loss
SWITCH
0 = No Switch
1 = SPST Rocker Switch
2 = DPST Rocker Switch
VOLTAGE SELECTOR
0 = No Selector
3 = 115-230 VAC
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Curtis Industries
A Division of Powers Holdings, Inc.
INSTALLATION INSTRUCTION
IMPORTANT – CHANGING
FUSE/VOLTAGE
FPE1
To change fuse, remove power cord.
Remove voltage selector and replace
fuse. Reinsert fuse holder. To change
the operating voltage on the FPE1
Series, remove the power cord and
rotate fuse holder block until desired
voltage aligns with the mark on the
module housing.
• Filter shipped without fuse.
Always use caution when selecting
and changing fuses and voltage
requirements. Curtis Industries is
not responsible for malfunction due
to improper installation/selection of
fuse and/or voltage select.
1-800-657-0853
POWER ENTRY MODULES
MOUNTING
METHOD & FUSING
6 = Screw Mount Metric or U.S. Fuse*
8 = Screw Mount 2 Metric
or U.S. Fuses
* U.S. Fuse not available
without voltage selector
Combination
H
1.575
(40,01)
4
57
Standard Mounting Cutouts
F2199CA, F2200CA, F2300CA, F2400CA, F2500CA, F2700CA,
F3100CA, F3200CA, F3400CA, F3500CA
.187
(4,75)
1.20
(30,5)
.140 Dia.
(3,55)
2 Holes
.140 Dia.
(3,55)
2 Holes
.820
(20,8)
1.575
(40,0)
.062 R.
(1,57)
1.20
(30.5)
.187
(4,75)
.410
(10,4)
.90
(22,9)
1.575
(40,0)
.234
(5,94)
Back Mounting
Front Mounting
F2600FP, F3300FP
F2600, F3300
.062 Dia.
(1,57)
5 Holes
POWER ENTRY MODULES
.450
(11,43)
.638
(16,21)
.300
(7,62)
.600
(15,24)
.140 Dia.
(3,55)
2 Holes
*.09 R
(2,29)
or
**.03 R
(.076)
1.275
(32,39)
1.145
(29,08)
.925
(23,5)
* for mounting from
backside
** F2600, F3300 for
mounting from
front side use .03
R vs. .09 R
1.417
(36,0)
F2700FB
2.821
(71,65)
.700
(17,78)
1.812
(46,02)
.906
(23,01)
.531
(13,49)
1.421
(36,09) .750
(19,05)
.219
(5,56)
.187
(4,75)
.094
(2,39)
1.20
(30,6)
R.03
Max.
1.062
(26,97) 1.500
.531
(38,10)
(13,49)
.09 R.
(2.28)
(Typ.)
.156 R.
1.062
(3,96)
(26,97)
(Typ.)
FPE1 Screw Mount Series
+.02
2.41 –0
(61,2)
M3
+.02
1.15 –0
(29,2)
1.575 ±.005
(40,0)
58
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
THREE-PHASE FILTERS
Curtis Industries
A Division of Powers Holdings, Inc.
]
59
Series F3480/F3600
Specifications:
Rated Voltage: 480 VAC - 50/60 Hz
600 VAC - 50/60 Hz
Rated Current:
480 VAC - 9A to 608A
600 VAC - 8A to 600A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
480VAC
Line to Ground
2210 VDC
Line to Line
2780 VDC
600VAC
3150 VDC
3150 VDC
Insulation Resistance: 1000 MΩ min. at 250 VDC
Ambient Temperature: 0°C to 40°C (32°F to 104°F)
Humidity Range: 0% to 95% R.H.
Termination:
• Wire
• Terminal Blocks
• Pressure Terminal Blocks
Weight: 3 to 65lbs (1.36 to 29.50kg)
Agency Approvals:
THREE-PHASE FILTERS
E78454
Designed to attenuate conducted interference
in a small package providing excellent insertion
loss, the F3480/F3600 series filters will provide
effective EMC solutions up to 600A at 600VAC and
power applications up to 360kVA. With effective
noise suppression in the critical 150kHz-30MHz
range, this advanced 2-stage filter line will support
both Delta and Wye connected loads. Curtis
three phase filters are designed to provide EMC
solutions in many applications such as:
- Motor
- Motor Control Centers
- Facility Filters
- Uninterruptible Power Supplies
- Power Conditioning Units
- Laser Welders
- Automated Test Equipment
- Robotics
- CNC Machinery
- Elevators
- Industrial Ovens
F3480 Simplified Schematic
A
A
B
B
C
C
G
G
LINE
F3600 Simplified Schematic
A
A
B
B
C
C
N
N
G
LINE
60
www.curtisind.com
LOAD
Curtis Industries
A Division of Powers Holdings, Inc.
G
LOAD
Specifications subject to change.
Dimensions are shown for
reference purposes only.
3-Phase Power Line Filters
Ordering Information:
F3600 T 600
3-Phase Series:
F3480 = 480 VAC
F3600 = 600 VAC
Current Rating 008 - 608
(Refer to Charts)
T = Terminal Blocks
B = Wire Leads
A = .250 Q.C. Terminal
(8 - 50A Only)
F3480 Series - 480 VAC
Rated
Current
(Amps)
608A
322A
135A
112A
80A
60A
F3480T608
F3480B608
F3480T322
F3480B322
F3480T185
F3480B185
F3480T136
F3480B136
F3480T112
F3480B112
F3480T080
F3480B080
F3480T060
F3480B060
140mA
90mA
90mA
80mA
80mA
30mA
30mA
50A
F3480A050
F3480B050
F3480T050
15mA
32A
F3480A032
F3480B032
F3480T032
7mA
16A
F3480A016
F3480B016
F3480T016
3mA
9A
F3480A009
F3480B009
F3480T009
3mA
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Dimensions (Inches)
Minimum
Insertion Loss (dB)
CM
DM
.15
60
30
.5
70
40
CM
DM
.15
60
30
.5
70
40
CM
DM
.15
60
30
.5
70
35
CM
DM
.15
60
25
.5
65
35
CM
DM
.15
60
25
.5
65
35
CM
DM
.15
60
15
.5
70
25
CM
DM
.15
60
15
.5
70
25
CM
DM
.15
60
10
.5
75
40
CM
DM
.15
60
10
.5
70
45
CM
DM
.15
50
10
.5
70
50
CM
DM
.15
60
30
.5
80
45
Frequency (MHz)
1
5
70
60
40
35
Frequency (MHz)
1
5
70
65
40
40
Frequency (MHz)
1
5
70
65
35
45
Frequency (MHz)
1
5
70
60
45
30
Frequency (MHz)
1
5
70
60
45
30
Frequency (MHz)
1
5
70
65
45
40
Frequency (MHz)
1
5
70
65
45
40
Frequency (MHz)
1
5
80
75
50
50
Frequency (MHz)
1
5
80
75
50
50
Frequency (MHz)
1
5
80
75
50
40
Frequency (MHz)
1
5
80
70
50
50
10
45
30
30
30
20
10
55
35
30
45
20
10
55
40
30
45
30
10
50
30
30
40
20
10
50
30
30
40
20
10
55
40
30
45
30
10
55
40
30
45
30
10
70
50
30
50
40
10
65
50
30
45
40
10
65
40
30
50
40
10
60
50
30
50
50
A
B
C
D
E
F
G
18.75
5.25
5.93
41.25
18.75
5.25
4.50
--
16.00
8.00
.28 x
.40
10.50
5.25
4.63
23.50
8.00
4.00
.28 x
.40
10.50
5.25
4.50
--
11.25
4.12
4.25
20.25
11.25
4.12
3.50
--
10.00
5.00
.20 x
.30
8.50
4.12
4.25
16.00
8.50
4.12
3.50
--
7.00
3.50
.20 x
.30
8.50
4.12
4.25
16.00
7.00
3.50
.20 x
.30
8.50
4.12
3.50
--
8.50
4.12
4.25
16.00
8.50
4.12
3.50
--
7.00
3.50
.20 x
.30
8.50
4.12
4.25
16.00
7.00
3.50
.20 x
.30
8.50
4.12
3.50
--
8.00
5.12
2.25
--10.10
5.00
--
.19 x
.25
8.00
5.12
2.25
--10.10
5.00
--
.19 x
.25
6.00
3.88
2.00
--10.10
4.00
--
.16 x
.20
6.00
3.88
2.00
--10.10
4.00
--
.16 x
.20
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
THREE-PHASE FILTERS
185A
Part
Number
Maximum
Leakage
Each L/G
(250V,
60Hz)
61
Series F3480/F3600
F3480B & F3600B Dimensions
F
F3480T & F3600T Dimensions
E
F
G (Slots)
E
G (Slots)
B
B
NOTE:
“N” Lead Not
on F3480
NOTE:
“N” Terminal
Not on F3480
A
D
A
C
C
LINE
LOAD
LINE
60A & Above
60A & Above
G (Slots)
E
LOAD
G (Slots)
E
B
B
NOTE:
Only 3 Leads on
F3480 (Plus Ground)
NOTE:
Only 3-Pole Terminal
Block on F3480
A
D
A
C
C
LINE
LINE
LOAD
50A & Below
LOAD
50A & Below
THREE-PHASE FILTERS
F3600 Series - 600 VAC
62
Rated
Current
(Amps)
600A
300A
180A
80A
Part
Number
F3600T600
F3600B600
F3600T300
F3600B300
F3600T180
F3600B180
F3600T080
F3600B080
Maximum
Leakage
Each L/G
(250V,
60Hz)
120mA
60mA
60mA
30mA
45A
F3600A045
F3600B045
F3600T045
10mA
25A
F3600A025
F3600B025
F3600T025
8mA
16A
F3600A016
F3600B016
F3600T016
4mA
8A
F3600A008
F3600B008
F3600T008
4mA
www.curtisind.com
Dimensions (Inches)
Minimum
Insertion Loss (dB)
CM
DM
.15
60
20
.5
60
35
CM
DM
.15
60
25
.5
60
30
CM
DM
.15
60
20
.5
60
30
CM
DM
.15
60
15
.5
60
25
CM
DM
.15
60
10
.5
60
10
CM
DM
.15
60
5
.5
60
5
CM
DM
.15
50
5
.5
70
5
CM
DM
.15
60
5
.5
70
10
Frequency (MHz)
1
5
50
50
35
30
Frequency (MHz)
1
5
50
50
35
45
Frequency (MHz)
1
5
60
60
35
45
Frequency (MHz)
1
5
60
60
25
40
Frequency (MHz)
1
5
80
70
15
50
Frequency (MHz)
1
5
80
70
30
50
Frequency (MHz)
1
5
80
70
35
40
Frequency (MHz)
1
5
80
70
50
40
10
40
25
30
30
20
10
40
30
30
30
20
10
50
40
30
40
30
10
50
40
30
40
30
10
60
40
30
45
30
10
60
40
30
45
30
10
60
40
30
45
40
10
60
40
30
45
40
A
B
C
D
18.75
5.25
5.93
41.25
18.75
5.25
4.50
--
10.50
5.25
5.93
26.50
10.50
5.25
4.50
--
11.25
4.12
4.25
20.25
11.25
4.12
3.50
--
8.50
4.12
4.25
16.00
8.50
4.12
3.50
--
8.00
5.12
2.25
8.00
5.12
6.00
6.00
Curtis Industries
A Division of Powers Holdings, Inc.
E
F
G
16.00
8.00
.28 x
.40
8.00
4.00
.28 x
.40
10.00
5.00
.20 x
.30
7.00
3.50
.20 x
.30
--10.10
5.00
--
.19 x
.25
2.25
--10.10
5.00
--
.19 x
.25
3.88
2.00
--8.10
4.00
--
.16 x
.20
3.88
2.00
--8.10
4.00
--
.16 x
.20
Specifications subject to change.
Dimensions are shown for
reference purposes only.
DC FILTERS
]
General Purpose
High Performance
Curtis Industries
A Division of Powers Holdings, Inc.
63
DC FILTERS
General Purpose
FD Series Filters
The FD Series of DC filters are designed as a general
purpose line of filters for DC applications. They are
designed to comply with UL/EN 60950 and UL 1459,
CISPER 22 and Telecordia (Bellcore) GR-1089 at
25Amps and above. These filters are available with and
without circuit breakers for additional protection.
The FD Series is a compact size that can filter up to
300MHz ideally suited for the telecom-datacom market.
The FD0 Series is available from 6Amps to 100Amps in
the smallest, economical package. The FD02 is a high
frequency filter up to 3GHz (3,000MHz) in a compact
package.
These filters are ideally used in communications and
central office equipment.
• Power Supplies for Communications Equipment
• Network Routing Equipment
• Switching Equipment
• Base Stations
• Modems
• Services
• Ethernet Hubs
Specifications:
Rated Voltage: 80VDC Maximum
Rated Current:
6A
10A
20A
25A
50A
75A
100A
Current Overload: 6X for 8 seconds
Hi-Pot Rating (1 min):
Line to Ground
1060VDC
Line to Line
100VDC
Insulation Resistance: 1000 MΩ at 80VDC
Ambient Temperature: 0°C to 55°C (32°F to 131°F)
Humidity Range: 0% to 95% R.H.
Termination: See Chart at Right
6A to 20A (FD0)
Wire Leads: 18AWG
(FD0 25Amp to 100Amp not available with wire leads)
10AWG
6AWG
4AWG
Agency Approvals:
6Amp to 20Amp
E78454
30Amp (FD1, FD2, FD3)
50Amp
75Amp & 100Amp
064179 72031306
25Amp to 100Amp
E221098
64
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
72070096
72061592
E221098
Specifications subject to change.
Dimensions are shown for
reference purposes only.
Power Line Filter Selection Guide
FD1, FD2, FD3 SERIES
6
FD00BB006
6
FD00AA010
10
FD00BB010
10
FD00AA020
20
FD00DD020
20
FD00DD025
X
FD10BB030
30
FD10EE030
30
FD10BB050
50
FD10EE050
50
FD10BB075
75
X
X
FD10BB100
100
X
25
X
FD20B_ _ _
FD00DD050
50
X
FD20E_ _ _
FD00DD075
75
X
FD20R_ _ _
FD00DD100
100
X
FD20D_ _ _
FD02DD025
25
X
FD20H_ _ _
FD02DD050
50
X
FD20 _B_ _ _
FD02DD075
75
X
FD20 _C_ _ _
FD02DD100
100
X
FD20 _E_ _ _
X
X
X
X
X
X
X
X
X
X
X
X
X
30,
X
X
50,
or 80
X
X
X
X
X
FD30B_ _ _
X
FD30E_ _ _
X
FD30R_ _ _
FD30H_ _ _
FD30 _B_ _ _
X
30,
50,
75,
or 100
FD30 _C_ _ _
FD30 _E_ _ _
FD30 _T_ _ _
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Curtis Industries
A Division of Powers Holdings, Inc.
X
X
DC FILTERS
FD20 _T_ _ _
FD30D_ _ _
Dual Stud T-Block
Euro Connector
Termination
Wire Leads
Double Pole
Handle Breaker
Double Pole
Rocker Breaker
Part Number
Single Pole
Rocker Breaker
FILTER
Current Rating
(Amps)
Studs
Disconnect Type
General Purpose
FD00AA006
Wire Leads
Part Number
Quick Connects
FILTER
Current Rating
(Amps)
Termination
High Current
Connector
FD00 & FD02 SERIES
X
X
X
X
X
X
X
1-800-657-0853
65
FD Series Filters
How to Order
FD0
0
X
Y
000
CURRENT RATING:
006 =
6Amps
010 = 10Amps
020 = 20Amps
025 = 25Amps
030 = 30Amps
050 = 50Amps
075 = 75Amps
080 = 80Amps
100 = 100 Amps
SERIES
FD0
FD1
FD2
FD3
OPTIONS:
0 = Standard
2 = High Frequency
3-9 = Specials
General Purpose
LINE TERMINATION:
LOAD TERMINATION:
A = Quick Connect
A = Quick Connect
B = Wire Leads
B = Wire Leads
C = High Current Connector
D = Dual Studs/Screw Terminal
D = Dual Studs/Screw Terminal
E = Euro Block Connector
E = Euro Block Connector
H = Dual Stud T-Block
T = Dual Stud T-Block
with DPST Handle Breaker
R = Dual Stud T-Block
with SPST Rocker Breaker
NOTE: Not all terminations are available in all models.
DC FILTERS
Part
Number
66
TYPICAL INSERTION LOSS - dB (50 ohm Circuit)
MODE
.01
.03
.10
.15
.50
Frequency - MHz
1.0
5.0
10
30
100
300
1000
3000
FD00XX006
FD00XX010
FD00XX020
Common
Differential
–
–
–
–
–
–
10
15
22
45
30
60
42
60
47
50
40
50
–
–
–
–
–
–
–
–
FD00XX025
FD00XX050
FD00XX075
FD00XX100
Common
Differential
–
–
–
–
–
–
22
32
50
38
60
50
50
55
45
50
40
40
–
–
–
–
–
–
–
–
FD02XX025
FD02XX050
FD02XX100
Common
Differential
5
40
5
45
35
45
45
45
60
48
60
50
55
45
55
55
50
48
40
45
10
15
20
58
25
40
FD10XX030
FD10XX050
FD10XX075
FD10XX100
Common
Differential
5
55
15
60
48
70
60
70
65
70
65
65
60
70
60
60
55
50
25
35
25
15
–
–
–
–
FD20XX030
FD20XX050
FD20XX080
Common
Differential
5
55
15
65
48
70
60
65
70
60
70
65
70
55
60
50
55
45
–
–
–
–
–
–
–
–
FD30XX030
FD30XX050
FD30XX075
FD30XX100
Common
Differential
12
50
20
60
44
70
60
70
60
70
60
70
60
55
60
70
55
60
–
–
–
–
–
–
–
–
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
FD00 Filters
FD00AA (6, 10 and 20Amp) Dimensions
.188 Dia.
(4,77)
2 Holes
D
L
LO A D
LI NE
L
A
G
N
N
E
F
Amps
A
B
C
D
E
F
6A
3.312
(84,1)
2.000
(50,8)
1.125
(28,5)
2.940
(74,7)
2.500
(63,5)
.550
(14,0)
10A
3.312
(84,1)
2.000
(50,8)
1.500
(38,2)
2.940
(74,7)
2.500
(63,5)
.550
(14,0)
20A
L
O
A
D
L
I
N
E
B
F
.250 QC
(6,4)
C
See FD00DD below for Case Dimensions
A
.188 Dia.
(4,77)
2 Holes
D
FD00BB
B
(6 and 10Amp) Dimensions
Amps
A
B
C
D
E
6A
3.312
(84,1)
2.000
(50,8)
1.125
(28,5)
2.940
(74,7)
2.500
(50,8)
10A
3.312
(84,1)
2.000
(50,8)
1.500
(38,1)
2.940
(74,70)
2.500
(50,8)
E
C
4.000
(101,6)
Min.
.250
±.062
(6,35)
Typ.
No. 18 Gauge Wire
DC FILTERS
FD00DD (20Amp) Dimensions
.188 Dia.
(94,77)
2 Holes
2.500
(63,5)
L
O
A
D
L
I
N
E
General Purpose
L
O
A
D
L
I
N
E
2.940
(74,7)
3.312
(84,1)
(5) No. 8-32 Studs
.625
(15,87)
2.000
(50,8)
.625
(15,87)
1.500
(38,1)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
67
FD00 & FD02 Filters
FD00DD (25, 50, 75 and 100Amp) Dimensions
LO A D
LI NE
1/4-20 Stud
Pair Per
Connection
-48VDC
-48VDC
G
RTN
2.00
(50,8)
RTN
.625
(15,875)
.69
(17,526)
-48VDC
.75 -48VDC
(19,1)
1.000
(25,4)
.25
(6,35)
.38
(9,652)
RTN
4X 6-32 x
.23
RTN
.25
(6,35)
1.500
(38,1)
1.25 Max.
(31,75)
2.50
(63,5)
L
O
A
D
L
I
N
E
-48VDC
1.50
(38,1)
RTN
-48VDC
LOAD
-48VDC
G
1/4-20 Stud
Pair Per
Connection
RTN
DC FILTERS
RTN
3.875
(98,4)
.625±.020
(15,875)
1.63
(41,4)
www.curtisind.com
1.50
(38,1)
-48VDC
RTN
LINE
.38
(9,65)
4X 6-32 x
-48VDC
RTN
RTN
3.000
(76,2)
1.25 Max.
(31,75)
.38
(9,65)
.75
(19,05)
.25
(6,35)
.44
(11,18)
3.312
(84,12)
1.25 Max.
(31,75)
-48VDC
1.000
(25,4)
68
.38
(9,65)
FD02DD (25, 50 and 100Amp) Dimensions
LINE
General Purpose
1.25 Max.
(31,75)
Ø.56
(14,22)
LOAD
.23
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
FD1 Filters
FD10EE050
-48VDC
LO A D
LI NE
(50Amp) Dimensions
-48VDC
G
RTN
RTN
A
.25
(6,35)
D
.25
(6,35)
.59
(14,99)
B
+
+
L
O
A
D
L
I
N
E
E
F
–
–
#6-32 x .23 Min. Deep
(4 Places)
C
Amps
A
B
C
D
E
F
30A, 50A
4.25
(107,95)
3.50
(88,9)
1.37
(34,79)
3.750
(95,25)
3.000
(76.2)
2.33
(59,18)
75A, 100A
4.25
(107,95)
3.50
(88,9)
1.37
(34,79)
3.750
(95,25)
3.000
(76.2)
2.33
(59,18)
-48VDC
L OAD
L INE
(100Amp) Dimensions
-48VDC
G
RTN
DC FILTERS
FD10BB100
.69
(17,53)
High Performance
Terminals: AWG #8-24 Phoenix P/N
VDFK-6 Suitable for Field Wiring
RTN
.25
.25 (6,35)
(6,35)
A
D
.59
(14,99)
+
B
+
L
I
N
E
L
O
A
D
F
E
–
–
#4 AWG Wire - 18" LG 105°C TEW-UL 1283
(4 Places)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
#6-32 x .23 Min. Deep
(4 Places)
Curtis Industries
A Division of Powers Holdings, Inc.
C
.50
(12,7)
1-800-657-0853
69
FD2 & FD3 Filters
FD20HC080
80A
LI NE
(30, 50 and 80Amp) Dimensions
7.30
(185,4)
1.00
(25,4)
.50
(12,7)
-48VDC
LO A D
-48VDC
G
RTN
RTN
.50 Max.
(12.7)
5.00 Max.
(127)
LOAD
4.00
(101,6)
LINE
8.18
(207,8)
.27
(6,858)
3.183
(80,84)
1.45
(36,83)
7.625
(193,7)
.28
(7,112)
1.50
(38,1)
.060
(1.524)
2.54
(64,5) 2.00
(50,8)
.69
(17,5)
Line Terminals
1/4-20 x .38 Lg
Stud Pairs
Terminal Block
w/Optional Cover
DC FILTERS
Circuit Breaker 125% Trip,
Medium Delay Red/Black
Indicate Off 5000A Fault Current
1.100
(27,94)
4X #6-32 x
.250
(6,35)
.690
(17,526)
www.curtisind.com
ON
OFF
-48VDC
G
RTN
8.00
(203,2)
2X .260
(6,604)
.23
7.52
(191)
4X 12.00±.25
1.17
(29,72)
.75
(19,05)
-48VDC
7.3 Max.
(185,4)
2X .398
L (10,11)
I
N
E
6.740
6.00
(171,2) (152,4)
Line Terminals
1/4-20 x .38 Lg
Stud Pairs Terminal Block
w/Optional Cover
100A
RTN
RTN
-48VDC
.250
(6,35)
.625
(15,88)
6X Ø .156
-48VDC
(30, 50, 75 and 100Amp) Dimensions
1.60 Max.
(40,64)
LOAD
.625
(15,87)
5.500
(139,7)
High Current
Connector
+
48V
–
FD30RB100
70
2X .44
LINE
High Performance
1.21
(30,73)
1.270
(32,26)
L
O
A
D
4X .358
(9,903)
Curtis Industries
A Division of Powers Holdings, Inc.
2.03
(51,56)
RTN
1.00
Wire
(25,4) #4AWG
TEW-4
UL1283
-48VDC - Red
RTN - Black
2 Wires per
Terminal
4X .260
(6,604)
1.60 Max.
(40,64)
Specifications subject to change.
Dimensions are shown for
reference purposes only.
MEDICAL FILTERS
]
General Purpose
Combination
Curtis Industries
A Division of Powers Holdings, Inc.
71
F3099 RFI Filters
Maximum Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
250VAC
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1450VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max at rated current
Humidity Range: 0% to 95% R.H.
Termination:
A: Quick Connect
B: Wire
Maximum Leakage Current:
Each Line to Ground F3099 Series
115VAC, 60Hz:
2 µA
250VAC, 50Hz:
5 µA
Agency Approvals:
Features:
• Designed to Meet UL544 and IEC601 Specifications
for Medical and Dental Equipment, both patient care
and onpatient categories.
• Leakage current in this series is extremely low to
satisfy the stringest leakage current limit imposed by
safety regulations for medical and dental equipment.
E78454
F3099AA (6Amp) Dimensions
6A
A
B
C
D
E
2.53
(64,30)
1.82
(46,2)
0.78
(19,8)
2.126
(54,0)
2.53
(64,30)
2.53
(64,30)
1.82
(46,2)
0.78
(19,8)
2.126
(54,0)
1.32
(33,5)
MEDICAL FILTERS
Nominal
Current
Rating
6A
72
Part
Number
BLUE
A D
F3099AA06
F3099BB06
www.curtisind.com
BLUE
G/Y
BROWN
BROWN
QC/QC
Wire/Wire
B
E
C
Termination
Line/Load
N
WIRE LEADS, 18AWG,
(16AWG FOR 10A).
102(4.0) MIN.
B
E
G
N
6.36(0.25) FASTON TERMINAL
WITH Ø1.78 (0.070) HOLE
(SLOTTED HOLE
FOR GROUND)
A D
L
L
LOAD
Amps
099523 72102892
F3099 Series
Simplified Schematic
LINE
General Purpose Filtered Modules
Specifications:
C
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
Common
Differential
0.05
0.10
.15
3
—
7
3
11
6
Curtis Industries
A Division of Powers Holdings, Inc.
Frequency - MHz
.50
1.0
20
14
22
20
5.0
10
30
24
35
22
35
18
35
Specifications subject to change.
Dimensions are shown for
reference purposes only.
F3000/3100/3200/3400/3500 RFI Filters
Specifications:
Features:
E78454
• Designed to Meet UL544 Specification for Medical
and Dental Equipment. Available to UL/IEC 60601
Standard
• F3400/F3500 Have Enhanced Differential Mode
Performance
• Effective in Other Low-Leakage Current Applications
F3000/F3100/F3200 Series
Simplified Schematic
N
6A
Part
Number
Termination
Line/Load
L
LOAD
L IN E
LOAD
G
Nominal
Current
Rating
L
L
N
3A
F3400/F3500 Series
Simplified Schematic
G
N
N
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
.50
Frequency - MHz
1.0
5.0
10
30
F3400CA03
F3500CA03
IEC/QC
IEC/QC
Common
Differential
22
8
32
18
35
24
30
35
25
35
20
35
F3000AA06
F3100CA06
F3200CA06
QC/QC
IEC/QC
IEC/QC
Common
Differential
10
20
2
23
8
25
32
23
34
15
23
F3400CA06
F3500CA06
IEC/QC
IEC/QC
Common
Differential
15
8
21
18
24
24
24
35
22
35
26
35
MEDICAL FILTERS
L IN E
L
064179 72031206
72031376
General Purpose Filtered Modules
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
3A
6A
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max at rated current
Humidity Range: 0% to 95% R.H.
Termination:
A: QC – Quick Connect
C: IEC Receptacle
Maximum Leakage Current:
Each Line to Ground F3000 Series
115VAC, 60Hz:
2 µA
250VAC, 50Hz:
5 µA
Agency Approvals:
NOTE: Other combinations of terminals may be specified on special order.
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
73
F3000/3100/3200/3400/3500 (continued)
F3000AA
.188 Dia.
(4,77)
2 Holes
(6Amp)
Dimensions
L
I
N
E
1.750
(44,5)
General Purpose Filtered Modules
.550
(14)
L
O
A
D
2.125 2.50
(53,9) (63,5)
.875
(22,2)
.550
(14)
.625
(15,8)
.250 QC
(6,4)
F3100CA
.881
(22,4)
(6Amp)
F3400CA
(3 and 6Amp)
Dimensions
1.575 1.980
(40.0) (50,29)
Max.
Refer to Page 58
for Standard
Mounting Cutouts
L
I
N
E
L
O
A
D
1.145
(29,08)
1.415
(35,94)
.113 Dia.
(3,30)
2 Holes
.550
(14)
MEDICAL FILTERS
.805
(22,4)
F3200CA
(6Amp)
.250 QC
(6,4)
.881
(22,4)
F3500CA
(3 and 6Amp)
Dimensions
1.980
(50,29)
1.575 Max.
(40,0)
L
O 1.145
A (29,08)
D
L
I
N
E
1.555
(39,5)
.133 Dia.
(3,38)
2 Holes
.550
(13,97)
. 250 QC
(6,4)
.805
(22,4)
74
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
F3300 RFI Filters
Specifications:
• General Purpose “L-Type” Circuit Effective in
Reducing Both Incoming and Outgoing Powerline
Noise Levels in FCC “A” Applications
• Integral 5 X 20mm Single or Dual Fused IEC
Connector
• Optional SST Switched IEC Connector
• Low-Leakage
• Available to UL/IEC 60601 Standard and Meets UL
544 Specification for Medical and Dental Applications
• Available in Labor-Saving PC Mounted Case Style
E78454
064179 72031310
F3300F Simplified Schematic
L
LOAD
LINE
L
G
N
Part
Number
3A
F3300FA03
F3300FP03
Fused IEC/QC
Fused IEC/PC
6A
F3300FA06
F3300FP06
3A
Termination
Line/Load
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
Frequency - MHz
1.0
5.0
.15
.50
10
30
Common
Differential
21
8
32
18
36
24
30
35
28
35
28
35
Fused IEC/QC
Fused IEC/PC
Common
Differential
18
8
30
18
34
24
26
35
25
35
25
35
F3300WA03
F3300WP03
Dual Fused IEC/QC
Dual Fused IEC/PC
Common
Differential
21
8
32
18
36
24
30
35
28
35
28
35
6A
F3300WA06
F3300WP06
Dual Fused IEC/QC
Dual Fused IEC/PC
Common
Differential
18
8
30
18
34
24
26
35
25
35
25
35
3A
F3300JA03
F3300JP03
Switched IEC/QC
Switched IEC/PC
Common
Differential
21
8
32
18
36
24
30
35
28
35
28
35
6A
F3300JA06
F3300JP06
Switched IEC/QC
Switched IEC/PC
Common
Differential
18
8
30
18
34
24
26
35
25
35
25
35
MEDICAL FILTERS
Nominal
Current
Rating
N
General Purpose Filtered Modules
Features:
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
3A
6A
6A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max. at Rated Current
Humidity Range: 0% to 95% R.H.
Termination:
A: QC – Quick Connect
F: Fused IEC
J: Switched IEC
P: PCB Pins
W: Dual Fused IEC
Maximum Leakage Current:
Each Line to Ground
F3300
115VAC, 60Hz:
.015mA
250VAC, 50Hz:
.025mA
Agency Approvals:
NOTE: Other combinations of terminals may be specified on special order.
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
75
F3300 Series (continued)
F3300FA (3 and 6Amp) Dimensions
L
I
N
E
.20
(5,0)
F3300FP (3 and 6Amp) Dimensions
L
O
A
D
1.140
(28,9)
2.000
(50,8)
1.730
(43,9)
Refer to Page 58
for Standard
Mounting Cutouts
.550
(13,9)
L
I
N
E
.20
(5,0)
1.260
(32,0)
1.296
(32,9)
.200 REF
(5,0)
2.20
(55,9)
1.730
(43,9)
2.75
(69,8)
1.140
(28,9)
1.260
(32,0)
1.296
(32,9)
1.420
(36,0)
(1) 5mm x 20mm Fuse
(not included)
1.420
(36,0)
.210
(5,3)
F3300WA (3 and 6Amp) Dimensions
L
I
N
E
F3300W Simplified Schematic
L
LOAD
L
LINE
General Purpose Filtered Modules
LOAD
G
N
.550
(13,9)
1.260
(32,0)
1.339
(34,0)
(2) 5mm x 20mm Fuses
(not included)
F3300JA (3 and 6Amp) Dimensions
L
I
N
E
F3300J Simplified Schematic
L
L OAD
LINE
L
G
N
.17
(5,0)
N
L
O
A
D
2.000
(50,8)
1.420
(36,0)
www.curtisind.com
1.140
(28,9)
.550
(13,9)
2.72
(69,8)
1.736
(44,0)
1.339
(34,0)
76
1.140
(28,9)
2.75
(69,8)
1.736
(44,0)
1.420
(36,0)
MEDICAL FILTERS
2.000
(50,8)
1.8
(5,0) Max.
N
L
O
A
D
Curtis Industries
A Division of Powers Holdings, Inc.
1.260
(32,0)
SPST Switch
Specifications subject to change.
Dimensions are shown for
reference purposes only.
FPM7/FPM8 Series
Specifications:
Features:
E78454
• RFI Filter Module Combines IEC Connector, Fusing,
and Voltage Select Features in One Unit
• FPM7 Series Filters Provide 20% More Differential
Mode Attenuation Than Comparable Units
• Accepts Either U.S. or European Standard Fuse Sizes
• Available to UL/IEC 60601 Standard and Meets UL
544 Specification for Medical and Dental Applications
064179 72031305
Refer to Page 80 for Ordering Instructions
General Purpose Filtered Modules
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
3A
3A
6A
6A
Current Overload: 6X for 8 Seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
1768VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max. at Rated Current
Humidity Range: 0% to 95% R.H.
Termination:
• IEC Receptacle
• Wire Wrap/Solder
Maximum Leakage Current:
Each Line to Ground
FPM7, FPM8
115VAC, 60Hz:
0.002mA
250VAC, 50Hz:
0.005mA
Voltage Select Card: Installed in 120VAC position
unless otherwise specified
Agency Approvals:
FPM7 Series Simplified Schematic
FUSING
LINE
G
B
A
a
b
G
FOR TRANSFORMERS WITH TAP
LOAD
C
A
C
240V
220V
MEDICAL FILTERS
L
SERIES-SERIES
110-220240 V
VOLTAGE
SELECTOR
1-POLE
c
D
D
N
Voltage Contacts
110V
b,e
220V
b,c
240V
a
d
H
F
E
e
2-POLE
E
F
2a
110V
G
Nominal
Current
Rating
Part
Number
LINE
L
Termination
Line/Load
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
FUSING
MODE
1-POLE
G
100-120220-240 V
VOLTAGE
SELECTOR
B
3A
FPM7XXX03
FPM8XXX03
G
IEC/Solder
Tabs
Common
Differential
6A
FPM7XXX06
N
FPM8XXX06
IEC/Solder
Tabs
Common
H
Differential F
LOAD
.50
.15
a
b
c
A
14
8
C
10
8
E
A
C20
SERIES-PARALLEL
Frequency
- MHz
FOR TRANSFORMERS
WITH TWO SEPARATE
WINDINGS
1.0
5.0
10
120V
100V
18
D
D
d
e
2-POLE
15
E18
120V
F
G
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
LINE
L
22
24
18
24
24
46
Voltage Contacts
100V 18 a,c,e
120V 39 b,c,e
220V
a,d
240V
b,d
Curtis Industries
A Division of Powers Holdings, Inc.
FUSING
G
LOAD
115-230 V
VOLTAGE
SELECTOR
1-POLE
B
a
A
B
A
22
50
15
40
18
40
15
40
1-800-657-0853
SERIES-PARALLEL
FOR TRANSFORMERS WITH TWO SEPARATE
WINDINGS
115V
30
77
L
D
B
H
NG
F
2-POLE
c
e
E
C
d
E
FPM7/FPM8 Series (continued)
e
F
2-POLE
FPM7 Series Simplified Schematic
FUSING
LINE
G
L
FUSING
LINE
G
B
1-POLE
G
L
D
B
NG
F
2-POLE
a
100-120220-240 V
b
VOLTAGE
SELECTOR
c
c
FOR TRANSFORMERS WITH TWO SEPARATE
WINDINGS
A
E
SERIES-PARALLEL
120V
FOR TRANSFORMERS WITH TWO SEPARATE
WINDINGS
100V
LOAD
C
120V
DA
C
E
F D
C
100V
120V
d
120V
E
e
F
GE
F
2-POLE
G
FUSING
LINE
G
L
FUSING
LINE
G
B
a
115-230
V
VOLTAGE
b
SELECTOR
1-POLE
G
L
D
B
F
2-POLE
A
e
c
E
C
D
F
e
Combination
FOR TRANSFORMERS WITH TWO SEPARATE
WINDINGS
115V
115V
115V
E
GE
F
2-POLE
Voltage Contacts
115V
a,b d,e
230V
c
Voltage Contacts
115V
a,b d,e
230V
c
G
FPM8 Series Simplified Schematic
LINE
SERIES-PARALLEL
115V
d
H
N
c
d b
H
NG
C
a
FOR TRANSFORMERS WITH TWO SEPARATE
WINDINGS
B
A
LOAD
C
B
DA
C
E
F D
A
Voltage Contacts
100V
a,c,e
120V
b,c,e
Voltage a,d
Contacts
220V
100V
240V
b,da,c,e
120V
b,c,e
220V
a,d
240V
b,d
SERIES-PARALLEL
LOAD
115-230 V
VOLTAGE
SELECTOR
1-POLE
Voltage Contacts
110V
b,e
220V
b,c
Voltage Contacts
240V
a
110V
b,e
220V
b,c
240V
a
G
A
C
D
H
N
A
a
e
110V
LOAD
d b
H
220V
110V
SERIES-PARALLEL
100-120220-240 V
VOLTAGE
SELECTOR
1-POLE
240V
DA
C
E
F D
2a
E
GF
2a
D
H
N
A
a
d b
ROCKER
SWITCH
FUSING
1-POLE
G
L
1-POLE
1
1a
LOAD
L
MEDICAL FILTERS
G
78
H
N
2-POLE
2
2a
N
2-POLE
G
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
FPM7/FPM8
Snap-Mount Series
(3 and 6Amp) Dimensions
Refer to Page 80
for Standard
Mounting Cutouts
2.266
(57,55)
1.260
(32,0)
1.051
(26,70)
.22
(5,5)
2.283
(58,0)
.100
(2,7) Q.C. Terminals All Locations
LI N E
L OAD
1.091
(27,71)
1.051
(26,70)
Combination
1.091
(27,71)
MEDICAL FILTERS
FPM7/FPM8
Screw-Mount Series
1-800-657-0853
79
(3 and 6Amp) Dimensions
1.969
(50,0)
Refer to Page 80
for Standard
Mounting Cutouts
2.266
(57,55)
1.575
(40,0)
.22
(5,5)
1.142
(29,0)
2.283
(58,0)
LINE
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
.126
(3,20)
Dia. Holes
.100
(2,7) Terminals Except Switch
Curtis Industries
A Division of Powers Holdings, Inc.
LOAD
FPM7/FPM8 Series (continued)
How to Order
FPM7
FPM8
X
X
X
X
X
SERIES
FPM= Medical
Power Entry
CURRENT RATING
3 = 3 AMP
6 = 6 AMP
OPTIONS
(Consult Factory)
0 = Standard Units
SWITCH
0 = No Switch
1 = SPST Rocker Switch
w/Q.C.
2 = DPST Rocker Switch
w/Q.C.
VOLTAGE SELECTOR
0 = No Selector (FPM80 Series)
1 = 110-220-240 VAC
2 = 100-120-220-240 VAC
3 = 115-230 VAC
MEDICAL FILTERS
Combination
MOUNTING
METHOD & FUSING
0 = Snap Mount Metric Fuse
1 = Snap Mount US Fuse
2 = Snap Mount 2 Metric Fuses
3 = Snap Mount 2 US Fuses
6 = Screw Mount Metric Fuse
7 = Screw Mount U.S. Fuse
8 = Screw Mount 2 Metric Fuses
9 = Screw Mount 2 U.S. Fuses
FPM7/FPM8 Snap-Mount Series
2.20
(55,9)
*See Below
*Panel Thickness
www.curtisind.com
1.10
(27,9)
2.20
(55,9)
1.575
(40,0)
1.122
(28,50)
Cutout
.031" - .079" use 2.20"
.080" - .125" use 2.22"
80
FPM7/FPM8
To change fuse, remove power cord
and open the front cover on the module.
Remove fuse holder and replace fuse.
Reinsert fuse holder and close cover.
To change the operating voltage on the
FPM7 Series, remove the power cord
and open front cover. Rotate voltage
select wheel until desired voltage
appears in window of cover.
• Filter shipped without fuse.
Always use caution when selecting
and changing fuses and voltage
requirements. Curtis Industries is not
responsible for malfunction due to
improper installation/selection of fuse
and/or voltage select.
FPM7/FPM8 Screw Mount Series
.08 R
(2,0)
1.122
(28,50)
INSTALLATION INSTRUCTION
IMPORTANT – CHANGING
FUSE/VOLTAGE
.08 R
(2,0)
4-40
(M3)
Curtis Industries
A Division of Powers Holdings, Inc.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
FPM1 Series
Specifications:
FPM1 Series Simplified
Schematic without Voltage Selector
2
3
4
2 POLE
G
G
064179 72031202
FUSING
1 POLE
1
LINE
2
L
LOAD
E78454
L
1
3
4
N
N
2 POLE
G
G
Combination
• RFI Filter Module Combines IEC Connector, Fusing,
Optional Voltage Select and On/Off Switch into a
Single, Space-Efficient Assembly
• Enhanced Low Frequency Response with No
Resonant Peaks
• Fully Shielded for Radiative Noise Control
• Accepts Either U.S. or European Standard Fuse
Sizes. Dual or Single Power Line Fusing
• Meets IEC 60601 Standard and Meets
UL 544 Specification for Medical and Dental
Applications
LINE
Features:
Rated Voltage: 250VAC Maximum - 50/60 Hz
Rated Current:
115VAC
250VAC
10A
10A
Current Overload: 6X for 8 seconds
Hi-Pot Test (1 min):
Line to Ground
1500VAC
Line to Line
2250VDC
Insulation Resistance: 9 x 109 Ω at 100VDC
Ambient Temperature: 40°C Max at rated current
Humidity Range: 0% to 95% R.H.
Termination:
• QC – Quick Connect
• IEC Receptacle
Maximum Leakage Current:
FUSING
Each Line to Ground
PM1
PM1-PO
1 POLE L
0.002mA
0.015mA
L 115VAC, 60Hz:
250VAC, 50Hz:
0.005mA
0.025mA
Voltage Select Card: Installed in 120VAC position
unless otherwise specified
N
N
Agency Approvals:
FPM1 Series Simplified Schematic with Voltage Selector
FUSING
1 POLE L
1
N
FPM1XXXP0
2 POLE
G
MINIMUM INSERTION LOSS - dB (50 ohm Circuit)
MODE
.15
1
IEC/QC
Common
Differential
10
10
202
IEC/QC
Common
Differential
12
10
4
23
20
NOTE: Other combinations of terminals may be specified on special order.
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
.05
L
LOAD
FPM1XXX10
L IN E
10A
1 POLE
LOAD
LIN E
Part
Termination
Number FUSING Line/Load
110V
4
2 POLE
G
G
L
3
N
N
Nominal
Current
Rating
110V
2
MEDICAL FILTERS
L
20
3
N
Frequency - MHz
.50
1.0
5.0
10
30
30
30
33
35
25
55
20
60
15
55
30
30
35
35
25
65
25
65
30
55
G
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
81
1
1
FPM1 Series (continued)
FPM1
1.99
(50,5)
(10Amp)
Dimensions
L
I
N
E
L
O
A
D
2.41
(61,2)
Max.
1.12
(28,4)
3.00
(76,2)
2.58
(65,5)
Max.
1
2
H
1.575
(40,01)
1.15
(29,2)
Max.
3.20
(81,3)
WITH
VOLTAGE
SELECTOR
How to Order
FPM1
X
X
X
X
MEDICAL FILTERS
Combination
SERIES
FPM= Medical
Power Entry
X
CURRENT RATING
0 = 10 AMP
MOUNTING
METHOD & FUSING
6 = Screw Mount Metric or U.S. Fuse*
8 = Screw Mount 2 Metric
or U.S. Fuses
* U.S. Fuse not available
without voltage selector
FPE1 Screw
Mount Series
OPTIONS (Consult Factory)
1 = Standard Units
P = High Performance Insertion Loss
SWITCH
0 = No Switch
1 = SPST Rocker Switch
2 = DPST Rocker Switch
VOLTAGE SELECTOR
0 = No Selector
3 = 115-230 VAC
1.20
(30,6)
R.03
Max.
INSTALLATION INSTRUCTION
IMPORTANT – CHANGING
FUSE/VOLTAGE
+.02
2.41 –0
(61,2)
M3
+.02
1.15 –0
(29,2)
1.575 ±.005
(40,0)
82
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
FPM1
To change fuse, remove power cord.
Remove voltage selector and replace
fuse. Reinsert fuse holder. To change
the operating voltage on the FPM1
Series, remove the power cord and
rotate fuse holder block until desired
voltage aligns with the mark on the
module housing.
• Filter shipped without fuse.
Always use caution when selecting
and changing fuses and voltage
requirements. Curtis Industries is
not responsible for malfunction due
to improper installation/selection of
fuse and/or voltage select.
Specifications subject to change.
Dimensions are shown for
reference purposes only.
TECHNICAL CONSIDERATIONS
]
Understanding Terminology
Technical Considerations
Conducted Emissions Testing
Custom Filter Capabilities
Curtis Industries
A Division of Powers Holdings, Inc.
83
Understanding Terminology
Curtis Industries, a leading manufacturer of superiorquality electronic and electrical components and
assemblies for more than 70 years, offers a complete
line of RFI power line filters designed to help your
equipment meet FCC and CE requirements on
conducted EMI.
Radio frequency interference (RFI) is unwanted
noise generated by a wide variety of electronic and
electrical devices. Governments of most industrial
countries, including the United States, Canada and
the European Union have enacted guidelines on
emitted RFI.
Curtis designs quality into every product and then
tests for quality by specification compliance, including
hipot, component value, grounding and leakage,
on a 100% production basis. We employ a rigorous
component qualification program with thorough incoming
and on-line inspection procedures. Our computercontrolled 100% safety and performance testing to
demanding customer requirements is your assurance of
the highest quality RFI filters available today.
This section provides you with some basic
knowledge on terminology and technical information
helpful in solving your noise emission in power circuits.
For additional information visit our website at
www.curtisind.com.
Definitions
Attenuation: The decrease in intensity
or absorption of electromagnetic energy.
Expressed in dB.
Conducted Interference: Electromagnetic
signals entering a device through direct
connection.
Emissions: The level of electromagnetic
disturbances equipment causes to its
environment.
Filter: Remove electrical noise or interference
from the power line by cleaning up the sine
wave.
Immunity: The level to which equipment is
immune to electromagnetic disturbances in
its environment
TECHNICAL
CONSIDERATIONS
Impedance: Opposition to the flow of
84
electrical current when a given voltage is
applied.
Inductor: Passive component that produces a
voltage proportional to the change in current.
Measured in Henrys.
Insertion Loss: The electromagnetic signal
loss resulting from the insertion of a filter in a
transmission line. Expressed in dB.
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.
What is RFI?
Radio frequency interference (RFI) is the radiation or
conduction of radio frequency energy (or electronic
noise) produced by electrical and electronic devices
at levels that interfere with the operation of adjacent
equipment. Frequency ranges of most concern are
10 kHz to 30 MHz (conducted) and 30 MHz to 1 GHz
(radiated).
What causes RFI?
The most common sources include components
such as switching power supplies, relays, motors and
triacs. These devices are found in a wide variety of
equipment used in industrial, medical, white goods,
and building HVAC equipment.
What are the types of RFI?
An electrical or electronic device emits RFI in two
ways:
l Radiated RFI is emitted directly into the environment
from the equipment itself.
l Conducted RFI is released from components and
equipment through the power line cord into the AC
power line network. This conducted RFI can affect
the performance of other devices on the same
network.
How can RFI be controlled?
Radiated RFI is usually controlled by providing
proper shielding in the enclosure of the equipment.
l Conducted RFI can be attenuated to satisfactory
levels by including a power line filter in the system.
The filter suppresses conducted noise leaving the
unit, reducing RFI to acceptable levels. It also helps to
lower the susceptibility of the equipment to incoming
power line noise that can affect its performance.
l
How do RFI power line filters work?
Consisting of a multiple-port network of passive
components arranged as a dual low-pass filter, the RFI
filter attenuates radio frequency energy to acceptable
levels, while permitting the power frequency current
to pass through with little or no attenuation. Their
function, essentially, is to trap noise and to prevent it
from entering or leaving your equipment.
RFI is conducted through a power line in two
modes. Asymmetric or common mode noise
occurs between the line and ground. Symmetric or
differential mode is measured from line to line. See
the selection guide on page 2 under “Performance.”
Governments and safety agencies of major industrial
countries, including the United States, Canada, and
the European Union have established noise emission
regulations that are focused on digital and other
electronic equipment. The most important of these
guidelines are FCC CFR 47 (Parts 15 and 18) in
the United States and CISPR 11, 14 and 22 in the
European Union.
FCC CFR 47 (Part 15) regulates the RF
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents.
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
TECHNICAL
CONSIDERATIONS
What is the government’s role in
regulating RFI?
interference of electronic computing devices, defined
as any electronic device or system that generates
and uses timing signals or pulses at a rate in excess
of 10,000 pulses (cycles) per second and uses
digital techniques. This definition includes telephone
equipment that utilizes digital techniques and any
device or system that generates and uses radio
frequency energy for the purpose of performing dataprocessing functions such as electronic computations,
operations, transformations, recording, filing, sorting,
storage, retrieval or transfer.
FCC regulations are broken down into Class A
computing devices marketed for use in commercial,
industrial or business environments, and Class B
devices intended for use in a residential environment.
The European Union has harmonized the
various national regulations and has established the
international standards CISPR 11, 14 and 22. CISPR
11 covers industrial, scientific and medical equipment.
CISPR 14 covers electrical and thermal appliances
and tools. CISPR 22 covers information technology
equipment.
In addition to governmental regulations, safety
agencies worldwide have established guidelines for all
electrical/electronic components. These include UL,
CSA and TUV. They are designed to protect against
shock and fire hazard.
85
Technical Considerations
Meeting Emissions Standards
The emissions limits that a piece of equipment must
meet will depend on the intended market for that piece
of equipment. If there is more than one market, more
than one emission standard may have to be met. This
can have a substantial effect on the circuit, size, and cost
of a filter. Standards like the CISPR’s or the FCC Rules
Part 15 have frequency limits of 150 kHz to 30 MHz.
FCC 15 AND CISPR CONDUCTED EMISSION LIMITS
DIGITAL EQUIPMENT
80 –
Quasi-peak
Noise Modes
78 –
76 –
70 –
Power line filters attenuate noise in two different modes.
Common Mode: Also known as line-to-ground noise
measured between the power line and ground
potential.
Differential Mode: Also known as line-to-line noise
measured between the lines of power.
Power line filters are designed to attenuate either
one or both modes of noise. The need for one design
over another will depend on the magnitude of each
noise type present. The attenuation is measured in dB
(decibels) at various frequencies of signal.
Class A Industrial
74 –
72 –
Average
68 –
66 –
dBµV
Class A Industrial
64 –
62 –
Quasi-peak
60 –
Class B
Residential
58 –
56 –
54 –
52 –
Average
50 –
Circuit Configuration
Class B
Residential
48 –
46 –
0,15
0,5
5
30
TECHNICAL
CONSIDERATIONS
Frequency (MHz)
86
(Line Impedance Stabilization Network) and using
signal generators to inject RF of varying amplitude and
frequency, some insight can be gained as to the nature
of the problem. However, the criteria for acceptable
performance will have to be decided upon so that a
filter yielding this level of performance can be obtained
from the test procedure. Unfortunately, this still does not
eliminate the need for final testing in the actual operating
environment which, in many cases, occurs in the field.
Selection of a suitable filter can best be based on
the type of power supply or input impedance of the
equipment and on the mode of the offending RFI noise.
EMI measurements are generally made using
Spectrum Analyzers with Average or Quasi-Peak
detectors in accordance with methods described
in CISPR 16. Quasi-Peak differs from Average
measurements by weight-averaging the peaks into
the total.
Equipment meeting these specifications can
utilize a filter with a fairly high cutoff frequency. Other
standards like FCC 18 with a low frequency limit of 10
kHz will result in the equipment using lower cutoff filters.
As might be expected, the lower the cutoff frequency,
the larger the physical size and the higher the cost of
the filter.
Conducted RFI Susceptibility
The problem of susceptibility can be extremely difficult
to deal with because the amplitude and frequency of
the offending RF noise are seldom known and are often
intermittent. If the malfunction can be duplicated by
isolating the equipment from the power line with LISN’s
www.curtisind.com
Power line RFI filters are generally built with two or
three-pole filter networks. As the number of poles and
the corresponding component count increases, the
cost will increase also. Trying to typify an equipment’s
impedance as either high or low for purposes of filter
selection may not be successful. If it is a complex
impedance, it could probably be low at some
frequencies, high at others, and some intermediate
value at still other frequencies.
Although we have been generally successful in
recommending a two-pole network for linear power
supplies and three-pole networks for switching power
supplies and synchronous motors, you should not limit
your testing to just one circuit type if either additional
circuit performance or lower cost is desired. Consider
the following: If the equipment looked strictly capacitive,
the performance of a two-pole network would be
reduced to that of a single-pole filter.
Figure 1a.
A signal source (E) with
its internal impedance
driving a capacitive load.
Curtis Industries
A Division of Powers Holdings, Inc.
Undoubtedly the two-pole filter would be a more
economical choice with probably equal performance in
this application. Since the equipment is not likely to be
equivalent to either one of these simple cases, the only
way to find the best cost-effective solution is to test the
filters in your equipment and base your judgement on
these test results.
Figure 1b.
The same circuit as in Figure 1a, with the addition of
a 2-pole low pass filter. Notice filter capacitor C1 is in
parallel with the capacitive load.
Figure 1c.
Combining capacitor
C1 in Figure 1b,
with the load
results in this circuit
configuration.
The filter has been reduced to one inductive element, L1.
Obviously a three-pole filter would be preferred for
maximum performance. Likewise, if the equipment
looked strictly inductive, the performance of a threepole network would be reduced to that of a two-pole
network.
Figure 2a.
A signal source
with its internal
impedance driving
an inductive load.
Figure 2b.
Figure 2c.
Combining inductor L2 in Figure 2b, with the load
results in this circuit configuration, the filter has been
reduced to two effective elements, L1 & C1.
The maximum leakage current that a device is allowed
depends on the requirements of the particular safety
agency involved. Here, selection of the filter is quite
easy since either the filter is designed to meet a given
level or it is not. Although there is no compromise
when it comes to safety specifications, it should be
understood that for a given level of performance, as
the leakage current is reduced, the physical size of the
package will increase. Curtis medical filters have a very
low leakage current.
Insertion Loss
DO NOT use the insertion loss specifications to make
your final decision. Power line filters are two-terminal
pair passive networks whose attenuation characteristics
can be defined by a complex transfer function. How
that transfer function will react in a particular system
and at specific frequencies will depend on the complex
impedances connected to each side of the filter. The
equipment impedance and the impedance of the
power line, even if a 50 ohm LISN (Line Impedance
Stabilization Network) is being used during emission
testing, will not generally be equal to the resistive
50 ohms used during insertion loss measurements.
Therefore, the performance of the filter in the
equipment cannot be related to the published insertion
loss data.
Minimum Insertion Loss
Do not be alarmed that the insertion loss figures we
have published may be of lower value than those of
our competition. You will only find guaranteed minimum
insertion loss figures in this catalog, without any
mention of typical values.
Insertion loss test data measured in a 50 ohm
system is a valuable incoming inspection tool to assure
you that consistent product is being shipped. The only
figures of any importance are those that specify the
criteria for acceptance or rejection of that product, and
those figures are the minimum values.
Curtis Industries
A Division of Powers Holdings, Inc.
1-800-657-0853
TECHNICAL
CONSIDERATIONS
The same circuit as in Figure 2a, with the addition of a
3-pole low pass filter. Notice filter inductance L2 is in
series with the inductive load.
Leakage Current
87
RFI/EMI Conducted Emissions Testing
Curtis offers full RFI/EMI conducted emissions testing
services for manufacturers who must produce equipment
in accordance with FCC and CE standards.
Curtis testing facilities consist of a laboratory
equipped to test and evaluate EMI characteristics of
equipment that must comply with FCC Part 15 and/
or CISPR standards. With these facilities, Curtis can
provide manufacturers with greater assistance in the
selection of RFI/EMI filters to help them meet the
necessary emission levels.
Isolated Environment Enhances
Test Capabilities
l
l
l
l
l
l
Totally isolated environment for both equipment under
test and test instrumentation provided by separate
chambers.
RF screen room shielded against magnetic, electric
and plane wave field per MIL-STD-285.
Specially constructed line impedance stabilization
networks (LISN) for FC Part 15 and CISPR testing.
Sensitive, reliable automatic measurement and
recording of conducted emissions data from 10 KHz
to 1 GHz.
Computer-controlled Agilent E7402A Spectrum
Analyzer with associated amplifiers and attenuators.
Agilent E7402A graphics capabilities allow quick
generation of hard copies of emissions test results.
The Curtis screen room provides complete RFI isolation for
equipment under test and the test instrumentation.
TECHNICAL
CONSIDERATIONS
Computer-controlled test equipment assures fast turnaround
on RFI emissions testing.
88
Fast Pre-Compliance Test Results
Computer-generated graphics and test reports provide
the customer with fast turnaround on all testing.
On-site RFI filter design/applications engineers
are available to assist in evaluating test results and
to determine cost-effective solutions to conducted
emissions problems before going to agencies.
Please contact your local Curtis representative or
the factory sales staff to coordinate pre-compliance
testing of your equipment at Curtis Industries.
www.curtisind.com
Curtis can provide environmental testing to demonstrate
performance and survival in harsh conditions.
Curtis Industries
A Division of Powers Holdings, Inc.
RFI
RFI
Power
Power
Line
Line
Filters
Filters
Terminal
Blocks
Family
FamilyofofProducts
Products
> RFI
RFI
FIlters
FIlters
>>
> Filtered
Filtered
Power
Power
Entry
Entry
>>
> Custom
Custom
Filters
Filters
>>
> Terminal
Terminal
Blocks
Blocks
>>
> Custom
Custom
Terminal
Terminal
Blocks
Blocks
>>
> Liquid
Liquid
Level
Level
Controllers
Controllers
>>
> PCB
PCB
Mount
Mount
Blocks
Blocks
>>
> DIN
DIN
Rail
Rail
RFI POWER LINE FILTERS
>>
R5 4.12
2400
2400
S. 43rd.
S. 43rd.
St. St.
Milwaukee,
Milwaukee,
WI WI
53219
53219
1-800-657-0853
1-800-657-0853
www.curtisind.com
www.curtisind.com
Innovative
Innovative
Innovative
Engineering
Engineering
Engineering
Solutions
Solutions
Solutions
