NMN1.75BK50

ADVANCED ENGINEERING SPECIALTY Technical Data Sheet Technical Data Sheet Put-Ups D  ense, Full Coverage Construction Nominal Size R  esists Gasoline And Engine Chemicals Part # 3/32” NMN0.09BK 1/8” NMN0.13BK 3/16” NMN0.19BK 1/4” NMN0.25BK 5/16” NMN0.31BK 3/8” NMN0.38BK 1/2” NMN0.50BK 5/8” NMN0.63BK 3/4” NMN0.75BK 7/8” NMN0.88BK 1” NMN1.00BK 1 1/4” NMN1.25BK 1 1/2” NMN1.50BK 1 3/4” NMN1.75BK 2” NMN2.00BK 2 1/2” NMN2.50BK 3” NMN3.00BK TIGHT WEAVE 3/8” NMT0.38BK E  conomical And Easy To Install S  oft, Pliable And Quiet C  ut And Abrasion Resistant M  eets Military Specifications A-A-59301 Wall Thickness ±0.015” Bulk Spool Shop Spool 0.020” 0.020” 0.030” 0.030” 0.030” 0.030” 0.030” 0.040” 0.040” 0.040” 0.050” 0.050” 0.060” 0.060” 0.060” 0.060” 0.060” 1,000’ 1,000’ 1,000’ 500’ 500’ 500’ 250’ 250’ 250’ 200’ 200’ 125’ 100’ 100’ 100’ 100’ 100’ 225’ 225’ 200’ 200’ 125’ 125’ 100’ 75’ 75’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ 0.030” 250’ 75’ Full Coverage, Soft, Supple, Strong And Attractive Cut Cleanly Hot Knife Material Polyamide Multifilament Grade NMN Multifilament Thickness N/A Available Colors Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black (BK The wide operating temperature range allows NM to protect delicate wiring in engine compartments and near exhaust systems. NM creates a unique and attractive retro look when installed on a/v cables. www.techflex.com 1.47 Black (BK) NM’s fabric-like softness and flexibility meet surprisingly tough specifications. The high coverage sleeving meets or exceeds military specifications A-A-59301. NM is highly resistant to abrasion, cuts, common automotive and marine chemicals, UV damage and vibration. It will not rot or retain moisture. 1 (833) SLEEVING • (973) 300-9242 • fax: (973) 300-9409 104 Demarest Road • Sparta, NJ 07871 0.29 0.33 0.56 0.79 0.99 1.09 1.74 2.85 3.15 4.35 5.15 5.50 6.46 7.73 9.01 10.32 11.00 Colors Available: Under the hood or across the floor, NM is the perfect sleeving product for protecting and improving the appearance of wires and cables. NM has been used in military wire harness applications for many years. Drawing Number TF001NM-WD (BK) (BK) (BK) (BK) (BK) (BK) (BK) (BK) (BK) (BK) (BK) (BK) (BK) (BK) (BK) (BK) (BK) Lbs/ 100’ Nylon Multi’s qualities make it a viable choice for defense and military applications that call for flexibility, strength and full coverage protection. HALOGEN FREE ADVANCED ENGINEERING Technical Data Sheet Melt Point ABRASION ASTM D-2117 428°F (220°C) Maximum Continuous CHEMICAL RESISTANCE Minimum Continuous -49°F (-45°C) PHYSICAL PROPERTIES www.techflex.com Mil-I-23053 248°F (120°C)