ADVANCED ENGINEERING
SPECIALTY
Technical Data Sheet
Technical Data Sheet
Put-Ups
E
conomical And Easy
To Install
R
esists Gasoline And
Engine Chemicals
C
onductive Mylar For
Shielding Applications
Nominal
Size
Part
#
1/4”
5/16”
1/2”
3/4”
1 1/4”
1 1/2”
CXN0.25SV
CXN0.31SV
CXN0.50SV
CXN0.75SV
CXN1.25SV
CXN1.50SV
Expansion Range
Min
Max
Bulk
Spool
Shop
Spool
1/4”
5/16”
1/2”
3/4”
1 1/4”
1 1/2”
5/16”
1/2”
3/4”
1 3/8”
2”
3”
500’
250’
250’
200’
100’
100’
125’
100’
80’
40’
30’
25’
Available
Colors
CP,
CP,
CP,
CP,
CP,
CP,
SV,
SV,
SV,
SV,
SV,
SV,
GL
GL
GL
GL
GL
GL
Lbs/
100’
0.25
0.36
0.52
0.83
1.25
1.50
I deal For Exposed
Applications
C
ut And Abrasion Resistant
Impressive High Performance
Braided Metal Looks
No installation hassles. No surface abrasion.
No ridiculous expense. Just the look
of polished braided steel.
Cut Cleanly
Hot Knife
Material
Mylar
Grade
CXN
Monofilament Diameter
.005”
Colors Available:
Copper (CP),
Silver (SV) & Gold (GL).
These heavy duty metalized mylar sleeves
are ideal for dressing up any application
with the look of braided stainless steel.
The standard CH has a more open look,
with transparent PET braided together
with the metallic strands to create a slight
glimmer when light strikes it and to allow
the color of the application to come through
for a special effect.
Our new X-tra coverage product, Chrome XC,
provides fuller coverage with no transparent
elements in the braided construction and
results in a smooth, continuous metallic shine
on any application. Application possibilities include
installing clear heatshrink tubing over hoses covered
with Chrome for a unique effect.
Drawing Number
TF001CXN-WD
Application possibilities include installing
clear heatshrink tubing over hoses covered
with Chrome for a unique effect.
Colors Available:
www.techflex.com
1 (833) SLEEVING • (973) 300-9242 • fax: (973) 300-9409
104 Demarest Road • Sparta, NJ 07871
Copper (CP), Silver (SV), Gold (GL).
Mylar® is a registered trademark of DuPont Corporation.
HALOGEN
FREE
SPECIALTY
ADVANCED
ENGINEERING
Technical Data Sheet
Technical Data Sheet
Melt Point
ABRASION
ASTM D-2117
482°F (250°C)
Medium
Mil-I-23053
257°F (125°C)
Abrasion Test Machine
Taber 5150
Abrasion Test Wheel
Calibrase H-18
Abrasion Test Load
500g
Room Temperature
70°F
Humidity
50%
Scuffing And A Few
Chrome Strands Broken
20 Test Cycles
Wear Pattern Continues
400 Test Cycles
Strands Beginning To
Break Down Rapidly
600 Test Cycles
Braid Worn Through
In Both Directions
Material Destroyed
700 Test Cycles
Pre-Test Weight
2,906 mg
Post-Test Weight
2,783.3 mg
Test End Loss Of Mass
Point Of Destruction
CHEMICAL
RESISTANCE
1=No Effect
2=Little Effect
3=Affected
4=More Affected
5=Severely Affected
Aromatic Solvents_________________ 2
Aliphatic Solvents__________________ 1
Chlorinated Solvents_______________ 3
Weak Bases_______________________ 1
Salts_____________________________ 1
Strong Bases______________________ 3
Salt Water 0-S-1926_________________ 1
Hydraulic Fluid MIL-H-5606__________ 1
Lube Oil MIL-L-7808________________ 1
De-Icing Fluid MIL-A-8243___________ 1
Strong Acids______________________ 3
Strong Oxidants___________________ 2
Esters/Ketones____________________ 1
UV Light_________________________ 1
Petroleum________________________ 1
Fungus ASTM G-21_________________ 1
Halogen Free____________________ Yes
RoHS___________________________ Yes
SVHC_________________________ None
Minimum Continuous
-94°F (-70°C)
PHYSICAL
PROPERTIES
Monofilament Diameter________ .005”
ASTM D-204
Recommended Cutting______Hot Knife
Colors__________________________ 3
Wall Thickness_________________ .013”
Specific Gravity ASTM D-792_______ 1.3
Moisture Absorption____________ .1-.2
% ASTM D-570
Hard Vacuum Data_________________
ASTM E-595 at 10-5 torr
TML___________________________ .19
CVCM_________________________ .00
WVR___________________________ .14
Outgassing___________________ Med
Oxygen Index___________________ 21
ASTM D-2863
122.7 mg
© 2021 Techflex® - Any unauthorized reproduction, in whole or part, in any medium whatsoever, without the express written permission of Techflex® is strictly forbidden.
Techflex® product names and logos are registered trademarks of Techflex®, unless otherwise attributed. The contents and illustrations contained herein are believed to be reliable.
Techflex® makes no warranties as to their accuracy or completeness and disclaims any liability in connection with their use. Techflex’s® only obligations are those in standard terms
of sale for these products and Techflex® will not be liable for any consequential or other damages arising due to misuse of these products or typographical errors or omissions.
07-30
Users should make their own evaluation to determine the suitability of these products for their unique and specific applications.
www.techflex.com
Maximum Continuous
Abrasion Resistance
很抱歉,暂时无法提供与“CXN1.25SV”相匹配的价格&库存,您可以联系我们找货
免费人工找货