ADVANCED ENGINEERING
SPECIALTY
Technical Data Sheet
Technical Data Sheet
Put-Ups
E
xcellent Noise Suppression
A
brasion Resistant
E
xtremely Lightweight
A
ttractive Appearance
D
oes Not Trap Heat Or
Moisture
Expansion Range
Nominal
Size
Part
#
Min
Max
Bulk
Spool
Shop
Spool
Available
Colors
Lbs/
100’
1/8”
1/4”
3/8”
1/2”
5/8”
3/4”
1”
NRN0.13BK
NRN0.25BK
NRN0.38BK
NRN0.50BK
NRN0.63BK
NRN0.75BK
NRN1.00BK
1/8”
1/4”
3/8”
1/2”
5/8”
3/4”
1”
3/16”
3/8”
1/2”
3/4”
1”
1 1/4”
1 5/8”
500’
500’
250’
250’
250’
250’
250’
100’
100’
100’
100’
100’
75’
50’
Black
Black
Black
Black
Black
Black
Black
0.3
0.5
0.9
1.1
1.5
2.0
2.4
Self-Fitting Protective Oversleeve
Cut Cleanly
Hot Knife
Material
Polyethylene Terephthalate
Flexo® Noise Reduction (NR) is a biaxially
braided sleeving combining monofilament
and multifilament PET yarns to create a full
coverage expandable sleeve that substantially reduces noise on wires, tubes and
hoses. The lightweight, rugged construction
also provides protection from abrasion and
vibration that is far superior to foam harness
sleeves. NR expands for easy installation
over splices and connectors and is flexible
enough for tight radius applications.
NR is used in body wiring harnesses,
instrument panel and lighting wiring, cable
and hose assemblies, and other limited access
applications where noise reduction is desirable.
Grade
NRN
Wall Thickness
.025”
www.techflex.com
1 (833) SLEEVING • (973) 300-9242 • fax: (973) 300-9409
104 Demarest Road • Sparta, NJ 07871
The braided construction will not hold moisture
and drains quickly when immersed.
Colors Available:
Black (BK)
SPECIALTY
ADVANCED
ENGINEERING
Technical Data Sheet
Technical Data Sheet
ABRASION
Medium
Rating_______________________ *UL94
*UL 94 V-O Raw Material
Abrasion Test Machine
Taber 5150
Abrasion Test Wheel
Calibrase H-18
Abrasion Test Load
500g
CHEMICAL
RESISTANCE
1=No Effect
2=Little Effect
3=Affected
4=More Affected
5=Severely Affected
Aromatic Solvents_________________ 2
Aliphatic Solvents__________________ 1
Chlorinated Solvents_______________ 3
Weak Bases_______________________ 1
Salts_____________________________ 1
Strong Bases______________________ 2
Salt Water 0-S-1926_________________ 1
Hydraulic Fluid MIL-H-5606__________ 1
Lube Oil MIL-L-7808________________ 1
De-Icing Fluid MIL-A-8243___________ 1
Strong Acids______________________ 3
Strong Oxidants___________________ 2
Esters/Ketones____________________ 1
UV Light_________________________ 1
Petroleum________________________ 1
Fungus ASTM G-21_________________ 1
Halogen Free____________________ Yes
RoHS___________________________ Yes
SVHC_________________________ None
ASTM D-2117
446°F (230°C)
Maximum Continuous
Mil-I-23053
257°F (125°C)
Minimum Continuous
-22°F (-30°C)
PHYSICAL
PROPERTIES
Monofilament Diameter________ .010”
ASTM D-204
Flammability Rating___________ *UL94
*UL 94 V-O Raw Material
Recommended Cutting_____ Scissor/HK
Colors___________________________ 1
Wall Thickness__________________ .025”
Tensile Strength (Yarn)____________ 7.5
ASTM D-2256 Lbs
Specific Gravity ASTM D-792_____ 1.38
Moisture Absorption____________ .1-.2
% ASTM D-570
Hard Vacuum Data__________________
ASTM E-595 at 10-5 torr
TML___________________________.19
CVCM_________________________ .00
WVR___________________________ .16
Outgassing___________________ Med
Oxygen Index____________________ 21
ASTM D-2863
© 2021 Techflex® - Any unauthorized reproduction, in whole or part, in any medium whatsoever, without the express written permission of Techflex® is strictly forbidden.
Techflex® product names and logos are registered trademarks of Techflex®, unless otherwise attributed. The contents and illustrations contained herein are believed to be reliable.
Techflex® makes no warranties as to their accuracy or completeness and disclaims any liability in connection with their use. Techflex’s® only obligations are those in standard terms
of sale for these products and Techflex® will not be liable for any consequential or other damages arising due to misuse of these products or typographical errors or omissions.
07-30
Users should make their own evaluation to determine the suitability of these products for their unique and specific applications.
www.techflex.com
Abrasion Resistance
FLAMMABILITY
Melt Point
很抱歉,暂时无法提供与“NRN0.38BK”相匹配的价格&库存,您可以联系我们找货
免费人工找货