ROL-08
www.hammondmfg.com
Mr. Friedhelm Rose, Ms. Betty Rose, Mr. Matthias Rose.
Hammond Manufacturing is proud to be the exclusive North American sales partner of
ROLEC Gehäuse-Systeme GmbH of Germany.
ROLEC was founded in 1987 by Mr. Friedhelm Rose and his son, Mr. Matthias Rose.
Mr. Friedhelm Rose developed the first water and dust-tight enclosures over 40 years ago, establishing the very basis
of the electronic enclosure industry in Germany.
Following Mr. Friedhelm Rose’s retirement, ROLEC is successfully managed by second generation of the Rose
family, Mr. Matthias Rose and Ms. Betty Rose. ROLEC continues to offer innovative enclosure solutions of the highest
quality, living up to their motto of “Enclosures are our passion.”
Hammond Manufacturing carries an extensive inventory of ROLEC enclosure products in our 90,000 square foot
North American distribution centre. ROLEC enclosure products are available through the complete Hammond
Manufacturing distributor network.
Hammond North American Distribution Centre
Technical references and CAD downloads available at www.hammondmfg.com
2
www.hammondmfg.com
INDEX
DIECAST ALUMINUM
aluCASE
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
R190 & R191 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
aluNORM
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
R100 Series - Shallow Lid, Deep Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
R101 Series - Deep Lid, Shallow Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
R102 Series - Deep Lid, Deep Body. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
conFORM
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
R110, R111 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
handCASE
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
R270, R271 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
EXTRUDED ALUMINUM
mobileCASE
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
R250, R251 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
NON-METALLIC
starCASE
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R230 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
technoBOX
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R220 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
technoCASE
R200, R201 Series - ABS Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R210, R211 Series - Polycarbonate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
polyTOP
Specifcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R132 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
polyDOOR
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R130, R131 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
19
20
21
22
23
24
25
26
27
Technical references and CAD downloads available at www.hammondmfg.com
3
www.hammondmfg.com
aluCASE
Specifications
Key Features
Diecast Aluminum
•
•
•
•
•
•
•
•
•
•
•
Enclosure can be installed after closing lid
Snap in design covers hide both lid screws and
installation holes
Modern, high quality instrument enclosure
Material - Aluminum die-cast: GD SI 12 / DIN 1725
Shallow lid, deep body
Captive stainless steel lid screws
Enclosure can be mounted after closing lid
Integrated 1.7 mm recess in lid for membrane keypads
and front panels
Neoprene oil and petrol resistant - thermoplastic gasket
standard. (-40ºC up to +120ºC)
Clip-on design covers - to hide mounting & lid screws
(plastic - polyoxymethylene) - grey RAL 7040
Complete with lid captivation devices
Degree of protection: NEMA 4X, IP67
Textured polyester powder coat, grey RAL 7040. (can
be supplied unpainted on special order)
Includes optional use lid captivation straps
• Dual channel construction
• Mounting holes accessiblewith lid closed
• All holes outside of gasket seal.
Technical references and CAD downloads available at www.hammondmfg.com
4
www.hammondmfg.com
aluCASE
R190 & R191 Series
Diecast Aluminum
Part No.
R191-090-000
R191-092-000
R190-110-000
R190-112-000
R190-130-000
R190-132-000
R190-150-000
R191-150-000
R190-152-000
R191-152-000
R190-170-000
R191-170-000
R190-172-000
R191-172-000
Units
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
Width
A
90
3.5
90
3.5
110
4.3
110
4.3
130
5.1
130
5.1
150
5.9
150
5.9
150
5.9
150
5.9
170
6.7
170
6.7
170
6.7
170
6.7
Length
B
120
4.7
160
6.3
140
5.5
200
7.9
160
6.3
220
8.7
180
7.1
180
7.1
260
10.2
260
10.2
200
7.9
200
7.9
280
11
280
11
Height
(Including Lid)
C
60
2.4
60
2.4
60
2.4
60
2.4
70
2.8
70
2.8
60
2.4
90
3.5
60
2.4
90
3.5
60
2.4
90
3.5
60
2.4
90
3.5
Technical references and CAD downloads available at www.hammondmfg.com
5
www.hammondmfg.com
aluNORM
Specifications
Key Features
Diecast Aluminum
•
•
•
•
•
•
•
•
•
•
•
Material - Aluminum die-cast: G AI SI 12 / DIN 1775
Shallow lid, deep body
Captive stainless steel lid screws
Neoprene oil and petrol resistant gasket standard.
(-40ºC up to +80ºC)
Degree of protection NEMA 4X, IP65, DIN 40050
Temperature Range (-40ºC up to +80ºC)
Single-channel Fastening System. Trouble-free
turning 90º to 90º with square enclosures by
synchronous arrangement of channels
Special developed external mounting feet made
from zinc-die-cast. Can be turned through 90º.
The fastening holes have engagement lugs for this
purpose. (See accessories)
All sizes have inner blind holes. A mounting
plate made of zinc-plated steel is available (See
accessories)
Textured polyester powder coat, light grey RAL7032.
(can be supplied unpainted on special order)
CSA certified, Type 4, for use with industrial control
equipment
1
Screws and mounting holes outside of gasket
seal...
2
Space saving single channel mounting (ie...same
hole used for mounting enclosure through rear
and for the lid), provides larger interior space than
dual channel enclosures.
3
Captive stainless steel lid screws...
4
Enclosure holes threaded for easy installation and
repetitive assembly & disassembly...
5
Internal mounting shelves placed along both sides of enclosure include blind holes and grounding screws...
Technical references and CAD downloads available at www.hammondmfg.com
6
www.hammondmfg.com
aluNORM
R100 Series - Shallow Lid, Deep Body
Diecast Aluminum
Part No.
R100-060-000
R100-062-000
R100-064-000
R100-066-000
R100-080-000
R100-082-000
R100-084-000
R100-100-000
R100-102-000
R100-104-000
R100-120-000
R100-122-000
R100-124-000
Width
Length
Height
(Including Lid)
Units
A
B
C
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
65
2.6
65
2.6
65
2.6
65
2.6
80
3.2
80
3.2
80
3.2
100
4
100
4
100
4
120
4.8
120
4.8
120
4.8
50
2
65
2.6
100
4
150
6
80
3.2
120
4.8
160
6.4
100
4
150
6
200
8
120
4.8
180
7.2
240
9.6
40
1.6
40
1.6
40
1.6
40
1.6
60
2.4
60
2.4
60
2.4
80
3.2
80
3.2
80
3.2
100
4
100
4
100
4
Part No.
R100-160-000
R100-162-000
R100-164-000
R100-166-000
R100-200-000
R100-202-000
R100-204-000
R100-240-000
R100-242-000
R100-244-000
R100-320-000
R100-322-000
R100-324-000
Width
Length
Height
(Including Lid)
Units
A
B
C
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
160
6.4
160
6.4
160
6.4
160
6.4
200
8
200
8
200
8
240
9.6
240
9.6
240
9.6
320
12.8
320
12.8
320
12.8
160
6.4
240
9.6
320
12.8
480
19.2
200
8
300
12
400
16
240
9.6
360
14.4
480
19.2
320
12.8
480
19.2
640
25.6
100
4
100
4
100
4
100
4
120
4.8
120
4.8
120
4.8
120
4.8
120
4.8
120
4.8
120
4.8
120
4.8
120
4.8
Technical references and CAD downloads available at www.hammondmfg.com
7
www.hammondmfg.com
aluNORM
R101 Series - Deep Lid, Shallow Body
Diecast Aluminum
Part No.
R101-080-000
R101-082-000
R101-084-000
R101-100-000
R101-102-000
R101-104-000
R101-120-000
R101-122-000
R101-124-000
R101-160-000
R101-162-000
Width
Length
Height
(Including Lid)
Units
A
B
C
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
80
3.2
80
3.2
80
3.2
100
4
100
4
100
4
120
4.8
120
4.8
120
4.8
160
6.4
160
6.4
80
3.2
120
4.8
160
6.4
100
4
150
6
200
8
120
4.8
180
7.2
240
9.6
160
6.4
240
9.6
60
2.4
60
2.4
60
2.4
80
3.2
80
3.2
80
3.2
100
4
100
4
100
4
100
4
100
4
Part No.
R101-164-000
R101-166-000
R101-200-000
R101-202-000
R101-204-000
R101-240-000
R101-242-000
R101-244-000
R101-320-000
R101-322-000
R101-324-000
Width
Length
Height
(Including Lid)
Units
A
B
C
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
160
6.4
160
6.4
200
8
200
8
200
8
240
9.6
240
9.6
240
9.6
320
12.8
320
12.8
320
12.8
320
12.8
480
19.2
200
8
300
12
400
16
240
9.6
360
14.4
480
19.2
320
12.8
480
19.2
640
25.6
100
4
100
4
120
4.8
120
4.8
120
4.8
120
4.8
120
4.8
120
4.8
120
4.8
120
4.8
120
4.8
Technical references and CAD downloads available at www.hammondmfg.com
8
www.hammondmfg.com
aluNORM
R102 Series - Deep Lid, Deep Body
Diecast Aluminum
Width
Part No.
R102-080-000
R102-082-000
R102-084-000
R102-100-000
R102-102-000
R102-104-000
R102-120-000
R102-122-000
R102-124-000
R102-160-000
R102-162-000
Length
Height
(Including Lid)
Units
A
B
C
mm
80
3.2
80
3.2
80
3.2
100
4
100
4
100
4
120
4.8
120
4.8
120
4.8
160
6.4
160
6.4
80
3.2
120
4.8
160
6.4
100
4
150
6
200
8
120
4.8
180
7.2
240
9.6
160
6.4
240
9.6
40
1.6
40
1.6
40
1.6
54
2.2
54
2.2
54
2.2
66
2.6
66
2.6
66
2.6
66
2.6
66
2.6
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
Width
Part No.
R102-164-000
R102-166-000
R102-200-000
R102-202-000
R102-204-000
R102-240-000
R102-242-000
R102-244-000
R102-320-000
R102-322-000
R102-324-000
Length
Height
(Including Lid)
Units
A
B
C
mm
160
6.4
160
6.4
200
8
200
8
200
8
240
9.6
240
9.6
240
9.6
320
12.8
320
12.8
320
12.8
320
12.8
480
19.2
200
8
300
12
400
16
240
9.6
360
14.4
480
19.2
320
12.8
480
19.2
640
25.6
66
2.6
66
2.6
80
3.2
80
3.2
80
3.2
80
3.2
80
3.2
80
3.2
80
3.2
80
3.2
80
3.2
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
Technical references and CAD downloads available at www.hammondmfg.com
9
www.hammondmfg.com
conFORM
Specifications
Key Features
Diecast Aluminum
•
•
•
•
•
•
•
•
•
•
•
•
Material - Aluminum die-cast: G AI SI 12 / DIN 1775
Shallow lid, deep body
Captive stainless steel lid screws
Neoprene oil and petrol resistant gasket standard. (-40ºC
up to +80ºC)
EMI/RFI gasket is NOT required as lid to box connection
is INSIDE the gasket seal. A patented system with special
designed “teeth” in the enclosure bottom provide a lasting
and corrosion secure shield.
Degree of protection NEMA 4X, IP66, DIN 40050
Temperature Range (-40ºC up to +80ºC)
Separate channel system (outside the seal)
Specially developed external mounting feet made from
zinc-die-cast. Can be turned through 90º. The fastening holes have engagement lugs for this purpose.
All sizes have inner blind holes. A mounting plate made of zinc-plated steel is available
Textured polyester powder coat, light beige/grey RAL 7032. (can be supplied unpainted on special order)
CSA certified, Type 4, for use with industrial control equipment
1
EMI/RFI enclosure body connection --to lid (see
#2 right) is made INSIDE the gasket seal (see #3).
This eliminates expensive conducting gaskets and
the corrosion problems that can appear later...
2
Lid EMI/RFI edge (link here to lid close up) extends into enclosure and contacts “teeth” (see #1)
in enclosure body for a positive contact...
3
Gasket (thermoplastic, forprene, silicon free material) outside of EMI/RFI contact points and inside
of lid & mounting holes. No need for expensive
conducting gasket (see #1)...
4
Screws and mounting holes outside of gasket
seal...
5
Internal mounting shelves placed along both sides of enclosure include blind holes and grounding screws.
There are many mounting holes for self tapping screws in both the enclosure & the lid. Can also be used for
mounting P.C. boards or plates..
6
Enclosure holes threaded for easy installation and repetitive assembly & disassembly...
Technical references and CAD downloads available at www.hammondmfg.com
10
www.hammondmfg.com
conFORM
R110, R111 Series
Diecast Aluminum
Part No.
R111-081-000
R110-081-000
R111-082-000
R110-082-000
R111-083-000
R110-083-000
R111-121-000
R110-121-000
R111-123-000
R110-123-000
R111-161-000
R110-161-000
R111-162-000
R110-162-000
Units
Width
Length
Height
(Including Lid)
A
B
C
mm
84
79
44
inch
3.3
3.1
1.8
mm
84
79
67
inch
3.3
3.1
2.7
mm
84
129
44
inch
3.3
5.2
1.8
mm
84
129
67
inch
3.3
5.2
2.7
mm
84
179
44
inch
3.3
7.2
1.8
mm
84
179
67
2.7
inch
3.3
7.2
mm
125.5
127.5
60
inch
5
5
2.4
mm
125.5
127.5
90
inch
5
5
3.6
mm
125.5
225.5
60
2.4
inch
5
9
mm
125.5
225.5
90
inch
5
9
3.6
mm
166
166
60
inch
6.5
6.5
2.4
mm
166
166
100
inch
6.5
6.5
4
mm
166
266
66
inch
6.5
10.5
2.6
mm
166
266
100
inch
6.5
10.5
4
Technical references and CAD downloads available at www.hammondmfg.com
11
www.hammondmfg.com
handCASE
Specifications
Key Features
Diecast Aluminum
• Designed as a heavy duty hand held - manufactured in
diecast aluminum for superior strength.
• Ergonomic design for extended handling without fatigue.
• Two-part styled lid construction. Top half includes smooth
recessed area for membrane, label or silkscreen.
• Top half powder painted in a silver grey and the bottom half
is powder painted in black.
• P.C. board standoffs are cast into both halves of the
enclosure. Mounting screws included.
• The two smaller sizes include an ABS plastic battery
compartment installed and gasketed access bottom lid.
• Gasketed lid with two piece “tongue & groove” construction
provides protection against access of oil, dust and water.
• Lid screws are stainless steel.
• Designed to meet IP66.
Assembled View
Open View
(Bottom)
Assembled View
(Bottom)
Open View
(Top)
Technical references and CAD downloads available at www.hammondmfg.com
12
www.hammondmfg.com
handCASE
R270, R271 Series
Diecast Aluminum
Part Number
Battery
Compartment
R270-080-000
Yes
R270-100-000
Yes
R271-100-000
No
Length
Width
Height
(Including Lid)
Units
A
B
C
Inch
mm
Inch
mm
Inch
mm
7.09
180
8.66
220
8.66
220
3.15
80
3.94
100
3.94
100
1.67
42.4
1.67
42.4
2.46
62.4
Weight
1 lb. 1.1 oz.
1 lb.7.1 oz.
1 lb. 8.3 oz.
Technical references and CAD downloads available at www.hammondmfg.com
13
www.hammondmfg.com
mobileCASE
Specifications
Key Features
Extruded Aluminum
• Modern and ergonomic design
• Designed to house P.C. boards (not included) or equipment
for mobile use
• Sized for standard Eurocards
• P.C. boards mount horizontally by sliding into internal slots
extruded into the enclosure body
• Internal height 1.06” (27mm)
• Rugged body constructed from extruded aluminum with
diecast aluminum ends
• Silver anodized finish
• Choice of two versions - one piece closed or two piece
“clam shell”
• One piece version is rated to IP 65 (with gasketed end
plates below)
• Two piece version is rated to IP 54 (with gasketed end
plates below)
Diecast End Plates Attached
(Assembled View)
Example Application
(Assembled View)
With P.C. Board Mounted
(Two piece version)
Technical references and CAD downloads available at www.hammondmfg.com
14
www.hammondmfg.com
mobileCASE
R250, R251 Series
Extruded Aluminum
Aluminum Extrusion
Part Number
R250-080-120
R251-080-120
R250-080-160
R251-080-160
R250-100-160
R251-100-160
R250-100-200
R251-100-200
R250-130-180
R251-130-180
R250-130-240
R251-130-240
Version
One Piece
Two Piece
One Piece
Two Piece
One Piece
Two Piece
One Piece
Two Piece
One Piece
Two Piece
One Piece
Two Piece
Units
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
Length
L
4.72
120
6.3
160
6.3
160
7.87
200
7.09
180
9.45
240
Width
W
4.65
118
4.65
118
5.43
138
5.43
138
6.61
168
6.61
168
Profile Width
P
3.15
80
3.15
80
3.94
100
3.94
100
5.12
130
5.12
130
Technical references and CAD downloads available at www.hammondmfg.com
15
www.hammondmfg.com
mobileCASE
Accessories
Cover Plates & Gasket
• Choose either Flat or Collar (used for accepting cables or
batteries) style end plates
• Heavy duty diecast aluminum
• Painted with textured black powder paint (RAL 9005)
• Includes cover plates, thermoplastic black gaskets and
mounting hardware
• Sold in Pairs
Extruded Aluminum
Part Number
Style
R580-080-000
Flat
R580-100-000
Flat
R580-130-000
Flat
R581-080-000
Collar
R581-100-000
Collar
R581-130-000
Collar
Use With Aluminum
Extrusion Part Number
R250-080-120 or
R251-080-120 or
R250-080-160 or
R251-080-160
R250-100-160 or
R251-100-160 or
R250-100-200 or
R251-100-200
R250-130-180 or
R251-130-180 or
R250-130-240 or
R251-130-240
R250-080-120 or
R251-080-120 or
R250-080-160 or
R251-080-160
R250-100-160 or
R251-100-160 or
R250-100-200 or
R251-100-200
R250-130-180 or
R251-130-180 or
R250-130-240 or
R251-130-240
Flat Style
Collar Style
Flat Style (Top)
Collar Style (Bottom)
Cable Gland & Battery Kits
Part Number
R584-002-000
R584-004-000
R585-000-000
Use With Aluminum Extrusion
Part Number
Two Battery Holder (AA Size)
Four Battery Holder (AA Size)
Cable Gland Adaptor Kit
Cable Gland & Battery Kits
Technical references and CAD downloads available at www.hammondmfg.com
16
Battery Kits
www.hammondmfg.com
mobileCASE
Accessoires
Variable Cover Plates & Gasket
• Heavy duty diecast aluminum
• Painted with textured black powder paint (RAL 9005)
• Includes cover plates, thermoplastic black gaskets and
mounting hardware
• Sold in set to connect two extrusions side by side
Part Number
Style
Variable
R588-080-100
Variable
R588-080-130
Variable
R588-100-100
Variable
R588-100-130
Variable
R588-130-130
Variable
Variable Plate In Use
Variable Style
Extruded Aluminum
R588-080-080
Used To Join Aluminum
Extrusion Series
R250-080 or R251-080 TO
R250-080 or R251-080
R250-080 or R251-080 TO
R250-100 or R251-100
R250-080 or R251-080 TO
R250-130 or R251-130
R250-100 or R251-100 TO
R250-100 or R251-100
R250-100 or R251-100 TO
R250-130 or R251-130
R250-130 or R251-130 TO
R250-130 or R251-130
Shoulder Strap & Protective Caps
• Allows unit to be used in rough environments,
indoors or out
• Nylon straps & TPE shoulder pad and end caps
• Enclosure not included
Part Number
R583-080-000
R583-100-000
R583-130-000
Use With Aluminum
Extrusion Part Number
R250-080-120 or
R251-080-120 or
R250-080-160 or
R251-080-160
R250-100-160 or
R251-100-160 or
R250-100-200 or
R251-100-200
R250-130-180 or
R251-130-180 or
R250-130-240 or
R251-130-240
Shoulder Strap & Protective Caps
Assembled View
Technical references and CAD downloads available at www.hammondmfg.com
17
www.hammondmfg.com
starCASE - ABS Flame Retardant Plastic
Specifications
Application
• ABS flame retardant plastic enclosures are designed
for use as instrument enclosures, electrical junction
boxes or terminal wiring enclosures where metallic
enclosures are not suitable.
• Modern design with rounded edges & hidden
assembly screws
• Provide outstanding protection against dust, oil and
pressurized water.
• Impervious to atmospheric and marine corrosion.
Standards
Non-Metallic
• Meets NEMA Type 4, 4X, 12 and 13
• Meets IP66
• ABS Plastic material: UL94 V-0 1.6mm flammability
Rating
Construction
• Molded in ABS fire retardant plastic.
• Lid is recessed for membrane keypads or labels.
• Includes plastic lid supports (to keep lid captive to
box).
• Separate mounting channels & lid channels all
outside of the interior & gasket seal.
• Recessed silicon gasket with tongue and groove
construction.
• Captive stainless steel lid screws are provided.
Finish
• Light grey RAL 7035 - light texture
Includes optional use lid captivation straps
Removable hinged design covers hide both lid
screws and installation holes
Enclosure can be installed
after closing lid
Technical references and CAD downloads available at www.hammondmfg.com
18
www.hammondmfg.com
starCASE - ABS Fire Retardant Plastic
R230 Series
Part No.
R230-090-000
R230-092-000
R230-112-000
R230-130-000
R230-172-000
Application
Non-Metallic
• Dual channel construction
• Mounting holes accessible with lid closed
• All holes outside of gasket seal.
Length
Width
Height
(Including Lid)
Units
A
B
C
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
120
4.72
160
6.3
200
7.87
160
6.3
280
11.02
90
3.54
90
3.54
110
4.33
130
5.12
170
6.69
50
1.97
50
1.97
60
2.36
60
2.36
60
2.36
Technical references and CAD downloads available at www.hammondmfg.com
19
www.hammondmfg.com
technoBOX - ABS Plastic
Specifications
Application
• ABS plastic enclosures are designed for use as
instrument enclosures, electrical junction boxes
or terminal wiring enclosures where metallic
enclosures are not suitable.
• Modern design with slanted top edges
• Provide outstanding protection against dust, oil
and pressurized water.
• Impervious to atmospheric and marine corrosion.
Standards
• NEMA Type 4, 4X, 12 and 13
• IP66
• UL94 HB Flammability Rating
Non-Metallic
Construction
• Molded in ABS plastic.
• Separate mounting channels & lid channels.
• Recessed polyurethane gasket with tongue and
groove construction.
• Interlocking flange on lid and bottom sections.
• Captive stainless steel lid screws are provided.
• Cover screws fasten into pre-threaded holes.
1
Separate screw channels outside of the gasket
seal (lid screws & enclosure mounting screws)...
2
There are many mounting posts for self tapping
screws in both the enclosure & the lid. Can also
be used for mounting P.C. boards or plates..
3
Thermoplastic forpene gasket...
4
Enclosure mounts through channel and bottom
holes, concealed when lid is attached...
Finish
• Light grey RAL 7035
Technical references and CAD downloads available at www.hammondmfg.com
20
www.hammondmfg.com
technoBOX - ABS Plastic
R220 Series
R220-060-000
R220-080-000
R220-082-000
R220-084-000
R220-102-000
R220-104-000
R220-120-000
R220-122-000
R220-160-000
R220-162-000
Width
Height
(Including Lid)
Units
A
B
C
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
66
2.6
83
3.3
121
4.8
161
6.3
151
5.9
201
7.9
123
4.8
201
7.9
161
6.3
241
9.9
51
2
81
3.2
81
3.2
81
3.2
101
4
101
4
121
4.8
121
4.8
161
6.3
161
6.3
35
1.4
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
80
3.2
80
3.2
80
3.2
80
3.2
Non-Metallic
Part No.
Length
Technical references and CAD downloads available at www.hammondmfg.com
21
www.hammondmfg.com
technoCASE
R200, R201 Series - ABS Plastic
Application
• ABS plastic enclosures are designed for use as instrument
enclosures, electrical junction boxes or terminal wiring
enclosures where metallic enclosures are not suitable.
• Provide outstanding protection against dust, oil and
pressurized water.
• Impervious to atmospheric and marine corrosion.
Standards
• NEMA Type 4, 4X, 12 and 13
• IEC 60529, IP66
• UL94 HB Flammability Rating
Construction
Finish
Non-Metallic
• Molded in ABS plastic.
• Unique reversible bottom and cover section.
• Separate mounting channels provide access to rear
mounting position without opening the enclosure.
• Recessed polyurethane gasket with tongue and groove
construction.
• Interlocking flange on cover and bottom sections.
• Captive stainless steel cover screws are provided.
• Cover screws fasten into pre-threaded holes.
• Unique snap on screw covers hide the cover fastening
screws for a highly finished appearance.
Deep Depth - ABS Plastic
Shallow Depth - ABS Plastic
Part No.
R200-080-000
R200-082-000
R200-084-000
R200-086-000
R200-120-000
R200-122-000
R200-124-000
R200-160-000
R200-162-000
Units
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
Width
A
80
3.2
80
3.2
80
3.2
80
3.2
120
4.8
120
4.8
120
4.8
160
6.4
160
6.4
• Light grey RAL 7035
• Front plates, Internal Hinges, Mounting Feet
and P.C. Board Supports available
Length
B
80
3.2
120
4.8
160
6.4
240
9.6
120
4.8
200
8
240
9.6
160
6.4
240
9.6
Height
(Including Lid)
C
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
Part No.
R201-080-000
R201-082-000
R201-084-000
R201-086-000
R201-120-000
R201-122-000
R201-124-000
R201-160-000
R201-162-000
Technical references and CAD downloads available at www.hammondmfg.com
22
Units
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
Width
A
80
3.2
80
3.2
80
3.2
80
3.2
120
4.8
120
4.8
120
4.8
160
6.4
160
6.4
Length
B
80
3.2
120
4.8
160
6.4
240
9.6
120
4.8
200
8
240
9.6
160
6.4
240
9.6
Height
(Including Lid)
C
80
3.2
80
3.2
80
3.2
80
3.2
90
3.6
90
3.6
90
3.6
90
3.6
90
3.6
www.hammondmfg.com
technoCASE - Polycarbonate
R210, R211 Series - Polycarbonate
Application
• Polycarbonate enclosures are designed for use as
instrument enclosures, electrical junction boxes or terminal
wiring enclosures where metallic enclosures are not suitable.
• Provides outstanding protection against dust, oil and
pressurized water.
• Impervious to atmospheric and marine corrosion.
Standards
• NEMA Type 4, 4X, 12 and 13
• IEC 60529, IP65
• UL94 HB Flammability Rating
Finish
Construction
Shallow Depth - Polycarbonate
Part No.
R210-080-000
R210-082-000
R210-084-000
R210-086-000
R210-120-000
R210-122-000
R210-124-000
R210-160-000
R210-162-000
Units
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
Width
A
80
3.2
80
3.2
80
3.2
80
3.2
120
4.8
120
4.8
120
4.8
160
6.4
160
6.4
Non-Metallic
• Light grey RAL 7035
• Front plates, Internal Hinges, Mounting Feet
and P.C. Board Supports available
• Molded in Polycarbonate.
• Unique reversible bottom and cover section.
• Separate mounting channels provide access to rear
mounting position without opening the enclosure.
• Recessed polyurethane gasket with tongue and groove
construction.
• Interlocking flange on cover and bottom sections.
• Captive stainless steel cover screws are provided.
• Cover screws fasten into pre-threaded holes.
• Unique snap on screw covers hide the cover fastening
screws for a highly finished appearance.
Deep Depth - Polycarbonate
Length
B
80
3.2
120
4.8
160
6.4
240
9.6
120
4.8
200
8
240
9.6
160
6.4
240
9.6
Height
(Including Lid)
C
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
60
2.4
Part No.
R211-080-000
R211-082-000
R211-084-000
R211-086-000
R211-120-000
R211-122-000
R211-124-000
R211-160-000
R211-162-000
Units
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
Width
A
80
3.2
80
3.2
80
3.2
80
3.2
120
4.8
120
4.8
120
4.8
160
6.4
160
6.4
Length
B
80
3.2
120
4.8
160
6.4
240
9.6
120
4.8
200
7
240
9.6
160
6.4
240
9.6
Height
(Including Lid)
C
80
3.2
80
3.2
80
3.2
80
3.2
90
3.6
90
3.6
90
3.6
90
3.6
90
3.6
Technical references and CAD downloads available at www.hammondmfg.com
23
www.hammondmfg.com
polyTOP - Polyester
Specifcations
Non-Metallic
Application
• Designed for use as instrument enclosures, electrical
junction boxes or terminal wiring enclosures.
• Provides outstanding protection against dust, oil and
pressurized water.
• Impervious to atmospheric and marine corrosion.
Standards
•
•
•
•
NEMA Type 1, 2, 3, 3R, 4, 4X, 5, 12 and 13
IEC 60529, IP66
VO Flammability Rating
CSA certified, Type 4, for use with industrial control
equipment
Construction
• Two piece molded fiberglass reinforced polyester
construction.
• Captive polyfibre cover screws are provided with a
standard slot head.
• Cover screws fasten into pre-threaded holes.
• The threaded cover screw holes also provide
single channel access to rear mounting positions.
• Recessed neoprene gasket with tongue and
groove construction is oil and petroleum resistant.
• Threaded stainless steel inserts provide for
internal mounting.
Finish
• Light beige RAL 7032, Pantone 413
Technical references and CAD downloads available at www.hammondmfg.com
24
www.hammondmfg.com
polyTOP - Polyester
R132 Series
R132-080-000
R132-082-000
R132-084-000
R132-100-000
R132-102-000
R132-104-000
R132-120-000
R132-122-000
R132-124-000
R132-160-000
R132-162-000
R132-164-000
R132-400-000
Length
Height
(Including Lid)
Units
A
B
C
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
82
3.3
82
3.3
82
3.3
102
4.1
102
4.1
102
4.1
124
4.9
124
4.9
124
4.9
164
6.5
164
6.5
164
6.5
404
15.9
82
3.3
122
4.9
162
6.5
102
4.1
152
6.1
202
8.1
124
4.9
184
7.2
244
9.6
164
6.6
244
9.6
324
13
404
15.9
60
2.4
60
2.4
60
2.4
81
3.2
81
3.2
81
3.2
100
4
100
4
100
4
100
4
100
4
100
4
160
6.3
Non-Metallic
Part No.
Width
Technical references and CAD downloads available at www.hammondmfg.com
25
www.hammondmfg.com
polyDOOR - Polyester
Specifications
Standards
• NEMA Type 1, 2, 3, 3R,
4, 4X, 5, 12 and 13
• IEC 60529, IP66
• VO Flammability Rating
• CSA certified, Type 4, for use with industrial
control equipment
Construction
Non-Metallic
Application
• Designed for use as instrument enclosures, electrical
junction boxes or terminal wiring enclosures.
• Provide outstanding protection against dust, oil and
pressurized water.
• Impervious to atmospheric and marine corrosion.
• Two piece molded fiberglass reinforced
polyester construction.
• Captive polyfibre cover screws are provided with
a standard slot head.
• Cover screws fasten into pre-threaded holes.
• The threaded cover screw holes also provide
single channel access to rear mounting
positions.
• Recessed neoprene gasket with tongue and
groove construction is oil and petroleum
resistant.
• Threaded stainless steel inserts provide for
internal mounting.
Finish
• Light beige RAL 7032, Pantone 413
• Spring loaded stainless steel hinge pins are
standard, allowing for quick lid removal . (R130
& R131 Series only)
1
Captive screws made of strong polyamide,
corrosion free...
2
Oil resistant CR gasket...
3
Easily removable stainless steel hinge pin...
4
Four stainless steel M6 inserts in bottom of
enclosure (screws not included)...
5
Single channel for lid screws and enclosure mounting, which allows for maximum internal space. This
channel is outside of the gasket seal area, and includes stainless steel inserts.
Technical references and CAD downloads available at www.hammondmfg.com
26
www.hammondmfg.com
polyDOOR - Polyester
R130, R131 Series
Part No.
R130-120-000
R130-122-000
R130-124-000
R130-160-000
R130-162-000
R130-164-000
R130-200-000
R130-202-000
With Integrated Hinge & Acrylic Window in Lid
Width
Length
Depth
(Including
Lid)
Units
A
B
C
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
120
4.8
120
4.8
120
4.8
160
6.4
160
6.4
160
6.4
200
8
200
8
140
5.6
200
8
260
10.4
180
7.2
260
10.4
340
13.6
220
8.8
320
12.8
100
4
100
4
100
4
100
4
100
4
100
4
120
4.8
120
4.8
Part No.
R131-120-000
R131-122-000
R131-124-000
R131-160-000
R131-162-000
R131-164-000
R131-200-000
R131-202-000
Width
Length
Depth
(Including
Lid)
Units
A
B
C
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
120
4.8
120
4.8
120
4.8
160
6.4
160
6.4
160
6.4
200
8
200
8
140
5.6
200
8
260
10.4
180
7.2
260
10.4
340
13.6
220
8.8
320
12.8
100
4
100
4
100
4
100
4
100
4
100
4
120
4.8
120
4.8
Non-Metallic
With Integrated Hinge
Technical references and CAD downloads available at www.hammondmfg.com
27
www.hammondmfg.com
Additional Rolec Literature
ROLEC Full Line Catalog
English / German
(Available upon request)
ROLEC Ex-Enclosure Catalog
English / German
(Available upon request)
Rolec on the Web
For complete technical information, or inquiries outside of North America, please visit:
www.rolec.de
Technical references and CAD downloads available at www.hammondmfg.com
28
www.hammondmfg.com
Factory Modified Enclosures
•
•
•
•
•
Machining
Silk Screening
Hot Stamping
Special Colors
Custom Materials
Easy to quote and order
• Mark up our PDF drawings downloadable from our website
• Modify our AutoCad files downloadable from our website
• Email us at modifieds@hammondmfg.com
Certifications
Applies to aluNORM, conFORM, polyTOP,
and polyDOOR Series
Technical references and CAD downloads available at www.hammondmfg.com
29
www.hammondmfg.com
Degree of protection - “IP” Codes Information
Example:
IP 55
I . P. Protection Classification
Degrees of contact prevention and guarding against foreign objects
1st I . P.
Digit
Designation
Explanation
0
No protection
No protection of personnel from direct contact with active or moving parts.
No protection from access of solid foreign object.
1
Protection against
large foreign bodies
Protection of personnel from accidental large area direct contact with active
or internal moving parts (hand contact etc.) but no guard against intentional access
to such parts. Protection from access of solid foreign object larger than 12 mm in
diameter.
2
Protection against
medium foreign
bodies
Protection of personnel from finger contact with active or internal moving parts.
Protection from access of solid foreign object larger than 12 mm in diameter.
3
Protection against
small foreign bodies
Protection of personnel from touching active or internal moving parts with tools,
wires or similar foreign objects thicker than 2.5 mm. Protection from access of
solid foreign matter larger than 2.5 mm in diameter.
4
Protection against
granular foreign
bodies
Protection of personnel from touching active or internal moving parts with tools,
wires or similar foreign objects thicker than 1 mm.
5
Protection from
deposit of dust
Total protection of personnel from touching voltage carrying or internal
moving parts. Protection from harmful deposit of dust. Access of dust is not
completely prevented.
6
Protection from
access of dust
Total protection of personnel from touching voltage carrying or internal
moving parts. Protection from access of dust.
I . P. Protection Classification
Degrees of water protection
2nd
I . P.
Designation
Digit
0
1
2
No protection
Protectiion against
water dripping
vertically
Protection against
water dripping off
vertically
Explanation
No special protection
Water drops falling vertically must not have any harmful effect.
Water drops falling at any angle up to 15º from the vertical must not have any
harmful effect.
3
Protection against
spray water
Water drops falling at any angle up to 15º from the vertical must not have any
harmful effect.
4
Protection against
splash water
Water splashing against the object from all directions must not have any harmful
effect.
5
Protection against
jet water
A jet of water nozzled from all directions must not have any harmful effect.
6
Protection against
flooding
Water from temporary flooding, such as heavy seas, must not enter in any harmful
quantity.
7
Protection in dipped If the object is dipped into water under the defined conditions of pressure and time,
state
water must not enter it in any harmful quantity.
8
Protection in
submerged state
If the object is submerged in water, water must not enter in any harmful quantity.
Technical references and CAD downloads available at www.hammondmfg.com
30
www.hammondmfg.com
Additional Hammond Literature
Catalog
9R
Catalog
E5
Electronic
Racks
Industrial Electrical
Enclosures
Catalog
PB
Catalog
9C
Power Outlet
Strips
Electronic
Enclosures
Catalog
5C
Catalog
9C-R1
Electronic
Transformers
Ritec
Enclosures
Hammond on the Web
For detailed drawings, CAD files, catalog requests and downloads please visit
Hammond’s website at:
www.hammondmfg.com
Technical references and CAD downloads available at www.hammondmfg.com
31
Canada
Hammond Mfg. Co. Ltd.
394 Edinburgh Road North
Guelph, Ontario N1H 1E5
Tel: (519) 822-2960
Fax: (519) 822-0715
USA
Hammond Mfg. Co. Inc.
475 Cayuga Road
Cheektowaga, NY 14225
Tel: (716) 630-7030
Fax: (716) 630-7042
Les Fabrications Hammond
(Quebec) Inc.
4240 Seré Street
St. Laurent, Quebec H4T 1A6
Tel: (514) 343-9010
Fax: (514) 343-9941
Mexico
Hammond Mfg. Co. Inc.
475 Cayuga Road
Cheektowaga, NY 14225
Tel: +1 716 630 7030
Fax: +1 716 630 7042
www.hammondmfg.com
工商网监
湘ICP备2023018690号
