SB-4105

1 2 4 3 REVISIONS DRAWN REV DATE APPROVED PAM - ORIGINAL 12-5-03 JS PAM A E DIMENSION ADDED, SB-4105 WAS .215-.185 1-14-04 JS PAM B M3-0.5 WAS M3, REMOVED NOTE 2-2-04 JS PAM C ADDED SB-4107 & SB 4114 2-17-04 JS PAM D "NO CR6" NOTE ADDED 2-18-04 JS PAM E .196 7-12-04 JS 2.29-2.54 [.09-.10] PAM F ITEM CODE CHANGES 6-07-05 JS .76-1.27 [.03-.05] PAM G QC NOTE ADDED 9-1-06 JS PAM H HEAD GEOMETRY BETTER DEFINED 8-15-07 JS 09 UPDATED DRAWING AND REV FORMAT, CHANGED TO DUAL DIM, SHOULDER AND THREAD GEOMETRY BETTER DEFINED, REMOVED US AND ASIA ITEM CODES 6-18-12 MS D A D C DESCRIPTION E TC .006 WAS .194 D C G F #2 PHILLIPS HEAD RECESS B A B PART # A: HEAD SB-4102 8.89 .50 [.350 .020] SB-4105 E: THREAD LENGTH F: SHOULDER G: THREAD TYPE 5.44 .13 [.214 .005] 4.70-5.46 [.185-.215] 4.09 .06 [.161 .0025] 6-32 UNC-2A 8.89 .50 [.350 .020] 5.44 .13 [.214 .005] 3.20-3.81 [.126-.150] 4.09 .06 [.161 .0025] M3-0.5 SB-4107 8.89 .50 [.350 .020] 5.44 .13 [.214 .005] 4.70-5.46 [.185-.215] 4.09 .06 [.161 .0025] M3-0.5 SB-4112 12.7 .50 [.500 .020] 7.62 .13 [.300 .005] 4.70-5.46 [.185-.215] 4.98 .15 [.196 .006] 6-32 UNC-2A SB-4114 12.7 .50 [.500 .020] 7.62 .13 [.300 .005] 4.70-5.46 [.185-.215] 4.93 .06 [.194 .0025] SB-4118 12.7 .50 [.500 .020] 1 D: SHOULDER LENGTH 6.35 .13 [.250 .005] 4.70-5.46 [.185-.215] 1. Zn COATING, Cr6 FREE, ASTM B-117 (72 HOURS). NOTES: UNLESS OTHERWISE SPECIFIED UNITS ARE: MM [IN] TOLERANCE FOR ANGLES: 1.0 4.78 .06 [.188 .0025] 6-32 UNC-2A 2 GATE: N/A CALC WT. N/A AEARO TECHNOLOGIES LLC * a 3M company LOW CARBON STEEL QUALITY CONTROL: ALLOWABLE FLASH: M4-0.7 MATERIAL: MUST COMPLY WITH E-A-R SPECIALTY COMPOSITES SUPPLIER QUALITY MANUAL REQUIREMENTS NOTES: ANY FEATURE NOT DIMENSIONED IN PRINT MUST BE VISIBLY PRESENT, UTILIZE 3D CAD FOR CREATION 3 TITLE MACHINE SCREW - PHILLIPS - WITH SHOULDER SIZE B DRAWING NO. PAGE NO. 1 OF 1 SB-41XX 4 A