PDUB20

1000 Eaton Boulevard Cleveland, OH 44122 United States 1.9kW Single-Phase Hot-Swap PDU, 100-120V Outlets (4-5-15R, 4-5-15/20R) 2 5-20P, 10 ft. (3.05 m) & 6 ft. (1.83 m) Cords 2U Rack-Mount Highlights ● Single phase 16A 100-120V Hot-swap PDU ● Enables live replacement of a standard UPS with zero downtime ● 2U horizontal rackmount installation ● Compatible with any UPS with a 5-15P or 5-20P input plug ● Manual transfer switch controls PDU input power source ● Pair of 5-20P input cables connect to separate Utility and UPS inputs ● 8 Built-in outlets (4 5-15R / 4 515/20R) MODEL NUMBER: PDUB20 Package Includes Features ● Tripp Lite Hot-swap PDU systems support live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads ● PDUB20 is universally compatible with any Tripp Lite or other brand of 100-120V UPS rated up to 2600VA or 1920 watts with a NEMA 5-15P or 5-20P input cable ● 2U horizontal rackmount form factor compatible with 2 or 4 post racks ● Supports space saving rear-post mounting in the same rack space as many Tripp Lite Rackmount UPS systems (select installations, see manual) ● Pair of attached 5-20P PDU input cables connect to separate Utility and UPS power sources ● 4 5-15R and 4 5-15/20R outlets support critical networking loads in both Utility and UPS operating modes ● One additional 5-15/20R pass-through outlet supports UPS input power cord ● Dual input power cables support PDU connection to separate Utility and UPS power sources ● Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS ● Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS ● Set the switch to Utility to bypass the UPS and provide connected equipment with unfiltered power directly from the Utility line cord while the UPS system is removed and replaced with a fresh one ● Once the new UPS is up and running with all connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment Specifications OVERVIEW UPC Code 037332153883 1/3 ● Hot-swap PDU System ● 2U mounting brackets ● User manual with warranty information 1000 Eaton Boulevard Cleveland, OH 44122 United States PDU Type Hot-Swap INPUT PDU Input Voltage 100; 120 Recommended Electrical Service Works with most 2000 & 2200VA 100-120V UPS systems Maximum Input Amps 16 Maximum Input Amps Details Agency de-rated to 16A continuous PDU Plug Type NEMA 5-20P Input Phase Single-Phase Input Cord Details Utility input cable (10 ft / 3m) / UPS input cable (6 ft / 1.8m) Input Cord Length (ft.) 10 Input Cord Length (m) 3.05 OUTPUT Output Capacity (Watts) 1920 Output Capacity Details 1.92kW (120V), 1.6kW (100V) / 20A total capacity (Agency de-rated to 16A); 16A max per 5-15/20R outlet; 12A max per 5-15R outlet Frequency Compatibility 50 / 60 Hz Output Receptacles (4) 5-15/20R; (4) 5-15R Output Nominal Voltage 100-120V USER INTERFACE, ALERTS & CONTROLS Front Panel LEDs Lighted indicators confirm UPS and Utility switch position and operating mode Switches Manual 2 position transfer switch offers fast switching between UPS and Utility operating modes in less than 6 milliseconds SURGE / NOISE SUPPRESSION Automatic Shut-Off No PHYSICAL Material of Construction Metal Form Factors Supported 2U rackmount in 2 or 4 post racks Minimum Required Rack Depth (cm) 20.32 Minimum Required Rack Depth (inches) 8 PDU Form Factor Horizontal (2U) Shipping Dimensions (hwd / in.) 12.40 x 6.00 x 20.00 Shipping Dimensions (hwd / cm) 31.50 x 15.24 x 50.80 Shipping Weight (lbs.) 8.50 2/3 1000 Eaton Boulevard Cleveland, OH 44122 United States Shipping Weight (kg) 3.86 Unit Dimensions (hwd / in.) 3.420 x 17.320 x 3.030 Unit Dimensions (hwd / cm) 8.7 x 44 x 7.7 Unit Weight (lbs.) 7.70 Unit Weight (kg) 3.49 ENVIRONMENTAL Operating Temperature Range 0C ~ 40C (32F ~ 104F) Storage Temperature Range -30°C to +50°C (-22°F to +122°F) Relative Humidity 5-95% non condensing Operating Elevation (ft.) 0-10,000 Operating Elevation (m) 0-3000 FEATURES & SPECIFICATIONS High Availability PDU Features Manual Hot-Swap Bypass WARRANTY & SUPPORT Product Warranty Period (Worldwide) 2-year limited warranty © 2022 Eaton. All Rights Reserved. Eaton is a registered trademark. All other trademarks are the property of their respective owners. 3/3