725-020-520-201

ISSUE NUMBER THIS IS A C.A.D. GENERATED DRAWING DO NOT MAKE MANUAL REVISIONS TO MASTER. Contact Information 520-P.C. Tail, Regular Point - Tail LG.=.175(4.45) .100" (2.54mm) Contact Spacing x .200" (5.08mm) Row Spacing ORIGINAL 1 1.260 32.00 1.100 27.94 Card Slot Accepts .054 (1.37) to .070 (1.78) Thick P.C. Board 0.350 8.89 .230 [5.84] Point of Contact 0.550 13.97 0.100 2.54 0.420 10.67 Card Slot A A 0.300 7.62 SECTION A-A 725 Series Ultra-Mate Card Edge Connector - Press Fit Part Number: 725-020-520-201 See Sheet 2 for Features and Specifications EDAC INC TORONTO, ONTARIO CANADA YOUR CONNECTION TO QUALITY & SERVICE THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF EDAC INC.,AND SHALL NOT BE REPRODUCED,OR COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION. ACAD REFERENCE NO. DRAWN: J.LEE 725-ENG MASTER DATE: AUG31/09 CHECKED: DATE: SCALE: SHEET 1 DRAWING NUMBER 725-ENG MASTER OF 2 ISSUE 1 ISSUE NUMBER THIS IS A C.A.D. GENERATED DRAWING DO NOT MAKE MANUAL REVISIONS TO MASTER. ORIGINAL 1 Features • CSA Approved and UL Recognized • .100 (2.54) Contact Spacing x .200 (5.08) Row Spacing • Accepts .062 (1.57) Nominal Thickness P.C. Board • Low Profile Insulator Body, .550 (13.97) with End Notch Option • Ultra-Mate Compliant Section for Gas-Tight Reliable Connection in Plated Through Holes Eliminates Soldering Operations • Contact Termination Options Include P.C. Tail and .025 (0.64) Square Wire Wrap • Single or Dual Row Configurations • Accepts Between Contact and In-Contact Polarizing Keys • Tools Available for Insulator and Contact Removal. Simple “Flat Rock” Tooling is Used for Contact Installation Specifications • Insulator Material: Thermoplastic Polyester, UL 94V-0, Colour: Black • Contact Material: Copper, Nickel, • Contact Plating: 30 Microinches (0.76 Microns) Gold on the Mating Area, Tin on the Compliant Section and Contact Tails, Nickel Underplate. Other Plating Options Available Upon Request. • Current Rating: 2 Amperes Continuous • Contact Resistance: 10 Milliohms Maximum • Dielectric Withstanding Voltage: 1200 V AC rms at Sea Level Between Adjacent Contacts • Insulation Resistance: 5000 Megohms Minimum • Operating Temperature: -65 to +105 Degrees C • Daughter Board Insertion Force: 16 oz (4.45 N) Maximum per Contact Pair When Tested with a .070 (1.78) Thick Gauge • Daughter Board Withdrawal Force: 1 oz (0.28 N) Minimum per Contact Pair When Tested with a .054 (1.37) Thick Gauge • Contact Insertion into Hole: 20 lbs (89 N) Maximum • Contact Retention in Hole: 10 lbs (44 N) Minimum • Re-Insertability of Hole: 3 Times Minimum 725 Series Ultra-Mate Card Edge Connector - Press Fit Features and Specifications EDAC INC TORONTO, ONTARIO CANADA YOUR CONNECTION TO QUALITY & SERVICE THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF EDAC INC.,AND SHALL NOT BE REPRODUCED,OR COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION. ACAD REFERENCE NO. DRAWN: J.LEE 725-ENG MASTER DATE: AUG.31/09 CHECKED: DATE: SCALE: SHEET 2 DRAWING NUMBER 725-ENG MASTER OF 2 ISSUE 1