UNIPOLE & MULTIPOLE
CONNECTORS
No reproduction or use without express permission of editorial or pictorial content, in any manner.
LEMO reserve the right at all times to modify and improve specifications without any notification.
Printed in Switzerland, 2010 © LEMO SA
Pdf updated, November 2014
®
®
LEMO unipole and multipole connectors
This catalogue gives the complete description of LEMO unipole and multipole type connectors. The LEMO manufacturing
programme has been extended to almost 40 series divided into 7 product families with specific mating and environmental
characteristics. Each series includes a wide variety of plug, socket, coupler and bridge plug models, available in contact
configurations adapted to all round cables, including up to 106 conductors, and a maximum diameter of 30 mm.
Watertight and vacuumtight models are also available. Since LEMO connectors are perfectly screened and designed to
guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electromagnetic compatibility (EMC) is important.
Table of Contents
3 steps to select the right connector ................................................................................................................................................................................3
B Series (indoor, keyed)
Part Numbering system .........................................................................................................................................................................................11
Metal Housing models ............................................................................................................................................................................................12
Elbow socket models..............................................................................................................................................................................................22
Plastic housing models...........................................................................................................................................................................................24
Watertight and vacuumtight models .......................................................................................................................................................................26
Bridge models ........................................................................................................................................................................................................29
Threaded-latching models ......................................................................................................................................................................................30
Alignment Key and Polarized Keying System ........................................................................................................................................................31
K Series (outdoor, keyed)
Part Numbering system ..........................................................................................................................................................................................33
Metal Housing models ............................................................................................................................................................................................34
Watertight and vacuumtight models .......................................................................................................................................................................41
Alignment Key and Polarized Keying System ........................................................................................................................................................43
B and K Series
Insert configuration, Housings, Insulators, Contacts .................................................................................................................................45
S Series (indoor, stepped insert)
Part Numbering system .........................................................................................................................................................................................57
Metal Housing models ............................................................................................................................................................................................58
Elbow socket models..............................................................................................................................................................................................68
Plastic housing models...........................................................................................................................................................................................70
E Series (outdoor, stepped insert)
Part Numbering system ..........................................................................................................................................................................................75
Metal Housing models ............................................................................................................................................................................................76
Watertight and vacuumtight models .......................................................................................................................................................................82
L Series (outdoor, stepped insert)
Part Numbering system ..........................................................................................................................................................................................85
Metal Housing models ............................................................................................................................................................................................86
Vacuumtight models ...............................................................................................................................................................................................89
Alignment Key and Polarized Keying System ........................................................................................................................................................90
S, E and L Series
Insert configuration, Housings, Insulators, Contacts .................................................................................................................................91
2G Series (indoor, keyed)...............................................................................................................................................................................................110
2C Series (indoor, stepped insert).................................................................................................................................................................................116
1D Series (indoor, 4 concentric contacts) ....................................................................................................................................................................124
Spare parts ......................................................................................................................................................................................................................130
Accessories .....................................................................................................................................................................................................................136
Tooling .............................................................................................................................................................................................................................146
Panel cut-outs .................................................................................................................................................................................................................152
PCB drilling pattern ........................................................................................................................................................................................................154
Cable assembly (B, K, S and E series) ...........................................................................................................................................................................161
Technical characteristics ...............................................................................................................................................................................................171
www.lemo.com
1
®
®
Precision modular connectors to suit your application
Since it’s creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull
connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in
more than 80 countries with the help of over 40 subsidiaries and distributors.
Over 75’000 connectors
The modular design of the LEMO range provides over 75’000 connectors from miniature ø 3 mm to ø 50 mm, capable of
handling cable diameters up to 30 mm and for up to 106 contacts.
This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most
markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommunications and military.
LEMO’s Push-Pull Self-Latching Connection System
This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute
security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.
The LEMO self-latching system allows the connector
to be mated by simply pushing the plug axially into the
socket.
Once firmly latched, connection cannot be broken by
pulling on the cable or any other component part other
than the outer release sleeve.
When required, the connector is disengaged by a
single axial pull on the outer release sleeve. This first
disengages the latches and then withdraws the plug
from the socket.
UL Recognition
LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO
connector, cable and your equipment) will be easier because LEMO connectors are recognized.
CE marking
CE marking
means that the appliance or equipment bearing it complies with the protection requirements of one or
several European safety directives. CE marking
applies to complete products or equipment, but not to electromechanical components, such as connectors.
RoHS
LEMO connector specifications exceed the requirements of the RoHS directive (2011/65/EU) of the European Parliament
and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical and
electronic equipment marketed in Europe.
2
www.lemo.com
®
®
3 steps to select the right connector
●
Step 1: Select connector series
Select the appropriate LEMO connector series according to the environmental parameters that will affect your device
or cable such as indoor, outdoor, temperature range, ingress protection of the mated connector and of your device.
Use the table shown on page 4.
.
Part number coding
.
.
B, K, S, E, L, G, C or D
●
Step 2: Select connector size
Use the section (mm2) or the AWG of your cable wire to select the optimal contact diameter (values vary between
solder, crimp or print contact), see page 7.
Use this optimal contact diameter to determine the right connector size as well as the insert configuration, see page 6.
.
Part number coding
.
.
0, 1, 2, 3, 4, 5 or 6
●
Step 3: Complete the part number
Now that you know the series, as well as the insulator configuration, complete the part numbering system with the help
of the following table.
.
Part number coding
B Series (indoor, keyed)
K Series (outdoor, keyed)
S Series (indoor, stepped insert)
E Series (outdoor, stepped insert)
L Series (outdoor, keyed, stepped insert)
G Series (indoor, keyed)
C Series (indoor, stepped insert)
D Series (indoor, 4 concentric contacts)
.
.
Model
Series
Insert
configuration
Housing
material
Insulator
material
Contact
Collet
Variant
12
34
58
76
86
111
117
125
12
34
58
76
86
111
117
125
45
45
91
91
92
112
120
127
50
50
99
99
99
112
120
127
50
50
99
99
99
110
116
124
50
50
99
99
99
113
120
127
52
53
102
105
106
113
121
127
54
54
107
107
107
113
121
128
Note: Figures in the above table refer to the catalogue pages.
www.lemo.com
3
®
®
Step 1: Select Connector Series
LEMO unipole and multipole connectors
The standard keyed Series (B, 00, G)
The characteristic feature of these connector series is a keying system which allows higher contact density and prevents
all errors in alignment. The various keying alternatives prevent unwanted cross mating of otherwise similar connectors. It
is also possible to use crimp contacts to reduce cable assembly time. These connector series, include the 0B to 5B range
as well as the 00 multipole and 2G (shortened version of the 2B series), some vacuumtight models are also available.
The watertight keyed Series (K, L)
These series are watertight when mated and assembled to an appropriate cable. They include the 0K to 5K series, available in the same types as the 0B to 5B series, and the 0L to 2L series with keying and hermaphroditic insulator.
The standard Series (S, 00, C, D)
The characteristic feature of these connector series is the hermaphroditic insulator in the multipole version. They include
principally the 0S to 6S series, as well as the 00 unipole series, the 2C (shortened version) and the 1D quadrax type
(with 4 concentric contacts).
The watertight Series (E)
These series are watertight when mated and assembled to an appropriate cable. They include the 0E to 6E series and
are available in the same types as the S series.
00 multipole
B
K
00 unipole
S
indoor
outdoor or
harsh env.
indoor
outdoor or harsh environment
indoor
Ingress 1)
protection
IP50
IP66 to IP68
IP50
IP66 to IP68
IP50
Ingress 2)
protection
IP50 to IP68
vacuumtight
IP66 to IP68
vacuumtight
IP50 to IP68
vacuumtight
IP66 to IP68
vacuumtight
Temperature
range
- 55 to 250°C
- 55 to 200°C
- 55 to 250°C
- 55 to 200°C
Series
Environment
Latching
Shell sizes
E
L
G
C
IP50
IP50 to IP68
vacuumtight
- 55 to 250°C
D
IP50
- 40 to 120°C
Push-Pull self-latching
7 metal
and 4 plastic
6 metal
7 metal
and 5 plastic
6 metal
3 metal
4 metal
1 metal
Multipole
Multipole
hermaphroditic
Quadrax
Insulator type
Multipole
Unipole or multipole
hermaphroditic
Multipole
hermaphroditic
Contact type
Solder, crimp or print
Solder, crimp or print
Solder, crimp
or print
Stepped insert
Stepped
insert
1 keyway
Stepped
insert
4 concentric
contacts
84 to 90
109 to 115
116 to 122
123 to 128
Features
Page
13 keyways
9 keyways
9 to 31
32 to 44
55 to 73
74 to 83
Solder or print
Solder
Note:
1) Mated connector. See ingress protection code page 5.
2) Your device. For selection of connectors for watertight and vacuumtight devices, see page 5.
4
www.lemo.com
®
®
Definition of Ingress Protection (IP code)
IEC 60529 outlines an international classification system
for the sealing effectiveness of enclosures of electrical
equipment against the intrusion into the equipment of foreign bodies (i.e. tools, dust, fingers) and moisture. This
classification system utilizes the letters «IP» (Ingress Protection) followed by two digits.
Example: IP 50 = IP
Degrees of protection - First digit
Degrees of protection - Second digit
The first digit of the IP code indicates the degree to which
persons are protected against contact with moving parts
and the degree that equipment is protected against solid
foreign bodies intruding into an enclosure.
The second digit indicates the degree of protection of the
equipment inside the enclosure against the harmful entry
of various forms of moisture (e.g. dripping, spraying, submersion, etc.)
First digit description
Code
5
0
IP letter code
1st digit
2nd digit
Second digit description
Code
0
No special protection
0
No special protection
1
Protection from a large part of the body such as hand
or from solid objects greater than 50 mm in diameter
1
Protection from vertically dripping water
2
Protection against objects not greater than 80 mm in length
and 12 mm in diameter
2
Protection from dripping water when tilted up to 15°
3
Protection from entry by tools, wires, etc.,
with a diameter or thickness greater than 2.5 mm
3
Protection from sprayed water
4
Protection from entry by solid objects
with a diameter or thickness greater than 1.0 mm
4
Protection from splashed water
5
Protection from the amount of dust that would interfere
with the operation of the equipment
5
Protection from water projected from a nozzle
6
Dust-tight
6
Protection against heavy seas, or powerful jets of water
7
–
7
Protection against temporary immersion
8
–
8
Protection against complete continuous submersion in water
Selection of connectors for watertight or vacuumtight devices
LEMO B and S series are rated IP50 only when mated. LEMO E, K and L series are rated IP66 (and over) only when
mated. If a device must be watertight or vacuumtight when the connectors are unmated, it is important to select a watertight
or vacuumtight socket. You can consider the following two situations:
A) Figure 1 shows a typical outdoor device. To ensure this
device retains IP66 or above when connectors are
unmated, it is important to choose a watertight socket
from B, S, E, K or L series.
Fig. 1
your device
B) Figure 2 shows a device which is subjected to pressure
difference such as a near vacuum or pressurized gas
and must exhibit no leakage. To ensure the device
maintains its sealing, the socket is additionally tested for
helium leakage (according MIL 1344A).
Fig. 2
your device
epoxy
resin seal
FGG plug K series
EGG socket K series
FGG plug B series
HGG socket B series
Check temperature range (see section on pages 26, 41, 72, 82 and 89).
www.lemo.com
5
®
®
Step 2: Select Connector Size
Select the right connector size and insert configuration
To be able to select the right connector size (0 to 6), it is important to define the contact diameter (ø A).
Find out the available contact diameter (ø A) of the LEMO connector depending on the number of contacts required and
depending on the rating required (see pages 45 to 49 and 91 to 98).
The following table shows the contact diameter (ø A), or the solder pot diameter (ø C) for the 1D series.
2C
1D (ø C)
2G
4.0
6.0
6S-6E
4.0
6.0
5S-5E
4S-4E
2S-2E-2L 1)
1S-1E-1L 1)
0S-0E-0L 1)
00
5B-5K
4B-4K
3S-3E
Unipole
Multipole
3B-3K
302
303
304
305
306
307
308
309
310
312
313
314
316
318
319
320
322
324
326
330
332
336
340
344
348
350
354
360
362
364
372
106
2B-2K
2
3
4
5
6
7
8
9
10
12
13
14
16
18
19
20
22
24
26
30
32
36
40
44
48
50
54
60
62
64
72
106
1B-1K
113
116
120
130
140
160
112
0B-0K
Insert configuration
1
1
1
1
1
1
1
00
Number of contacts
Series
1.6
1.3
1.3
0.6
1.3
1.6
2.0
3.0
3.0
4.0
12.0
0.5
0.5
0.5
0.35
0.9
0.9
0.7
0.7
0.5
0.5
1.3
1.3
0.9
0.9
0.7
0.7
0.7
2.0
1.6
1.3
1.3
1.3
1.3
0.9
0.5
0.9
0.7
0.5
0.35
0.5
0.5
0.7
0.7
0.7
0.7
0.5
3.0
2.0
2.0
1.6
1.6
1.6
1.3
1.3/2.0
1.3
0.9
0.9
0.9
0.9
0.7
0.7
0.7
0.7
0.7
6.0
3.0
4.0
2.0
2.0
1.6
1.3
0.9
0.9
3.0
2.0
2.0
0.9
0.7
0.7
1.3
0.9
0.9
0.9/0.7
0.7
1.6
2.0
4.0
1.3
2.0
3.0
1.3
2.0
3.0
1.3 2.0/1.3 3.0/2.0
1.3
1.3
2.0
1.3/0.9 1.3 2.0/1.3
0.9
1.3
1.3
1.3
0.9
1.3
1.3
0.9
1.3
0.9
1.3
0.9
1.3
0.9
0.9
0.9
0.9
1.6
0.9
0.9
1.3
0.7
1.3
0.7
1.3
0.9
0.9
0.9
0.9
0.9
6.0
6.0/4.0
4.0
4.0/3.0
3.0
1.3
3.0
0.7
2.0
2.0
4.0/5.0
3.0/2.0
2.0
3.0/1.6
3.0
4.0
3.0
1.3
2.0
2.0
2.0 2)
2.0
1.3
1.3
1.3
1.3
0.7
0.7
0.7
1.6
3.0/1.6
1.6
0.5
0.9
6.0
8.0
0.7
3.0
2.0
1.6
1.6
1.3
1.3
0.9
Note: 1) L series not available in unipole version. 2) 2.0 is for 6S series, for 6E the values are 1.3 and 5.0.
6
www.lemo.com
®
®
Verify the fitting to your wire
Verify if the selected contact diameter (ø A) of the LEMO connector fits to your cable wire diameter (AWG number or
max. available section).
Contact
Contact type
øA
(mm)
Solder
øA
øC
øA
øC
Crimp
fig. 1
øA
øC
øA
øC
0.35
0.40
0.52) 0.402)
0.5
0.457)
0.73) 0.603)
0.7
0.80
0.9
0.806)
1.3
1.00
1.6
1.40
2.0
1.80
3.0
2.70
4.0
3.70
5.0
5.20
6.0
5.20
8.0
7.00
12.0 11.50
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
28
28
28
24
22
226)
20
16
14
10
10
–
–
–
–
0.55)
1
1
2
1
2
2
1
2
2
1
2
1
2
1
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0.7
0.9
1.3
øC
øA
1.6
fig. 2
øC
øA
øC
Form
(mm) per fig.
Solid
AWG Section
max.
max.
(mm2)
2.0
3.0
4.0
0.45
0.80
0.45
1.10
0.80
0.45
1.40
1.10
0.80
1.90
1.40
2.40
1.90
2.90
4.00
0.09
0.09
0.09
0.25
0.34
0.346)
0.50
1.00
1.50
4.00
6.00
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Conductor
Stranded
AWG
Section (mm2)
min.
max.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
30
30
28
26
224)
224)6)
204)
18
16
12
10
8
8
4
0
32
26
32
24
26
32
20
24
26
18
22
16
18
14
12
28
224)
28
20
224)
28
18
20
224)
144)
18
124)
14
104)
10
Fr 1)
(N)
Note
●
min.
max.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0.05
0.05
0.09
0.14
0.34
0.346)
0.50
1.00
1.50
4.00
6.00
10.00
10.00
21.00
50.00
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0.035
0.140
0.035
0.250
0.140
0.035
0.500
0.250
0.140
1.000
0.340
1.500
1.000
2.500
4.000
0.09
0.34
0.09
0.50
0.34
0.09
1.00
0.50
0.34
1.50
1.00
2.50
1.50
4.00
6.00
12
22
30
40
50
65
75
90
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Print
L
øC
øA
øA
øC
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 156 and 159.
●
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 157 and 160.
●
L
Print (elbow)
øA
L
øC
Note: 1) contact retention force in the insulator (according to IEC 60512-8 test 15 a).
2) for 00 multipole series.
3) for S, E, 2C, 2G and 1D series.
4) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. Make sure that the maximum conductor
diameter is smaller than ø C.
5) for 00 multipole series or for 0B and 1B series with male contacts.
6) for 0B.302/0B.303 and 0K.302/0K.303 ø C = 1.0 mm, AWG max 20, section max (mm2) 0.50.
7) for 00 and 1B/1K series, according to manufacturing and plating tolerance ø C min = 0.43 mm.
www.lemo.com
7
®
®
Verify the fitting to your cable
Verify if the selected connector size fits to your cable diameter.
Cable diameter range (mm)
Series
Collet for fitting
a bend relief
Collet
min.
max.
min.
max.
001)
0B
1B
2B
3B
4B
5B
1.1
1.5
2.2
1.5
4.1
5.1
9.6
3.4
5.5
7.5
9.7
11.7
16.0
25.0
1.1
1.5
2.2
1.5
4.1
5.1
9.6
3.4
5.0
7.0
9.0
11.0
15.0
15.5
0K
1K
2K
3K
4K
5K
1.0
1.3
1.3
2.6
4.6
9.6
5.0
8.53)
10.53)
15.03)
23.53)
23.5
1.0
1.3
1.3
2.6
4.6
–
5.0
8.5
10.5
15.0
15.0
–
Cable diameter range (mm)
Series
Collet for fitting
a bend relief
Collet
min.
max.
min.
max.
002)
0S
1S
2S
3S
4S
5S
6S
1.1
1.3
1.3
1.3
2.5
4.1
6.1
11.1
4.1
6.7
8.5
10.5
13.0
22.0
30.0
30.0
1.1
1.3
1.3
1.3
2.5
4.1
–
–
4.1
6.1
8.0
10.0
13.0
13.0
–
–
0E
1E
2E
3E
4E
5E
6E
1.0
1.3
1.3
2.6
4.6
9.6
13.0
5.0
8.53)
10.53)
15.03)
23.53)
23.5
30.0
1.0
1.3
1.3
2.6
4.6
–
–
5.0
8.5
10.5
15.0
15.0
–
–
0L
1L
2L
1.0
1.3
1.3
5.0
8.53)
10.53)
1.0
1.3
1.3
5.0
8.5
10.5
Cable diameter range (mm)
Series
Collet for fitting
a bend relief
Collet
min.
max.
min.
max.
2C
2G
2.2
4.5
8.1
7.9
2.2
4.5
8.1
7.9
1D
3.1
7.5
3.1
7.0
Note:
1) for multipole only.
2) for unipole only.
3) for these series the maximum cable diameter require models with oversized cable collet (type K).
8
www.lemo.com
K SERIES (watertight)
B SERIES
®
®
B Series
B series connectors provide the following main features:
– security of the Push-Pull self-latching system
– solder, crimp or print contacts (straight or elbow)
– multiple key options to avoid cross mating
of similar connectors
– 360° screening for full EMC shielding.
– multipole types 2 to 64 contacts
– high packing density for space savings
– keying system («G» key standard)
for connector alignment
Metal housing models (page 12)
Fixed plugs
Straight plugs
Fixed sockets
Free sockets
FWG
FGG
EGG
ECG
PHG
FAG
FGG
ENG
ECG
PHG
JGG
EKG
EZG
PNG
Elbow plugs
Fixed sockets
FPG
FFG
ESG
EYG
PKG
FNG
FHG
EHG
XPF
PFG
Fixed coupler
FEG
EJG
FMG
PEG
R
FDG
EEG
Elbow socket models (page 22)
FKG
FIG
EFG
Elbow sockets
ECG
EPG
Plastic housing models (page 24)
Bridge models (page 29)
Straight plugs
Fixed sockets
FGG
XBG, EXG
FGG
Plug with two
parallel sockets
Bridge plugs
ENG
FTG
FGY
FGY
Watertight or vacuumtight models (page 26)
Fixed
plug
Fixed sockets
HGG
Threaded-latching models (page 30)
Fixed
coupler
HHG
CFF, CRG
ENY
Straight plugs
FVG
HEG
Fixed socket
ESG
Elbow socket
YHG
S
HNG
10
HCG
HMG
FVB
XRB
www.lemo.com
®
®
Part Numbering System
Plug
FG G . 1B . 306 . C
L
A D 62
Free socket
PH G . 1B . 306 . C
L
L
D 62 Z
Variant: (page 54)
Cable ø: (page 52)
Collet type: (page 52)
Fixed socket
EG G . 1B . 306 . C
Y M
Coupler
RJ G . 1B . 306 . C
L
A
Model: (page 12)
Variant: (page 54)
Alignment key: (page 31)
Contact: (page 50)
Series: (page 12)
Insulator: (page 50)
Insert configuration: (page 45)
Housing: (page 50)
Part Number Example
Straight plug with cable collet:
FGG.1B.306.CLAD62 = straight plug with key (G) and cable collet, 1B series, multipole type with 6 contacts, outer shell in
chrome-plated brass, PEEK insulator, male solder contacts, D type collet for 6.0 mm diameter cable.
Free socket:
PHG.1B.306.CLLD62Z = free socket with key (G) and cable collet, 1B series, multipole type with 6 contacts, outer shell
in chrome-plated brass, PEEK insulator, female solder contacts, D type collet for 6.0 mm diameter cable and nut for fitting
a bend relief.
Fixed socket:
EGG.1B.306.CYM = fixed socket, nut fixing, with key (G), 1B series, multipole type with 6 contacts, outer shell in chromeplated brass, PEEK extended insulator, female crimp contacts.
Fixed coupler:
RJG.1B.306.CLA = straight fixed coupler with keys (J) at the flange end and key (G) at the other end, 1B series, multipole
type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, male-female contacts.
Part Section Showing Internal Components
Straight plug
Fixed socket
7
1
2
3
4
5
6
7
outer shell
earthing crown
retaining ring
hexagonal nut
locking washer
insulator
female contact
www.lemo.com
6
2
3
4
5
1
1
6
5
4
2
7
3
1
2
3
4
5
6
7
outer shell
latch sleeve
collet nut
split insert carrier
insulator
male contact
collet
11
®
®
Metal housing models
Technical Characteristics
Electrical
Mechanical and Climatical
Characteristics
Value
Endurance
Humidity
Temperature range
Resistance to vibration
Shock resistance
Salt spray corrosion test
Protection index (mated)
Climatical category
Standard
> 5000 cycles
IEC 60512-5 test 9a
up to 95% at 60° C
- 55° C, +250° C
10-2000 Hz, 15 g IEC 60512-4 test 6d
100 g, 6 ms
IEC 60512-4 test 6c
> 1000h
IEC 60512-6 test 11f
IP50
IEC 60529
55/175/21
IEC 60068-1
Characteristics
Value
at 10 MHz
at 1 GHz
Shielding
efficiency
Standard
> 75 dB
> 40 dB
IEC 60169-1-3
IEC 60169-1-3
Note:
the various tests have been carried out with FGG and EGG connector
pairs, with chrome-plated brass shell and PEEK insulator.
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 171.
FGG Straight plug, key (G) or keys
(A…M and R), cable collet
Reference
~L
øA
~M
S2
S1
Model
Series
FGG
FGG
FGG
FGG
FGG
FGG
FGG
001)
0B
1B
2B
3B
4B
5B
Dimensions (mm)
A
L
6.4 28.5
9.5 36.0
12.0 43.0
15.0 50.0
18.0 58.0
25.0 75.0
35.0 103.0
M
S1
S2
20.5
26.0
32.0
38.0
43.0
57.0
78.0
5.5
8.0
10.0
13.0
15.0
21.0
31.0
5
7
9
12
14
20
30
M1
Cable assembly
(page 161)
Note: 1) the surface design of the 00 series is different.
FGG Straight plug, key (G) or keys (A…M),
cable collet and nut for fitting a bend relief 2)
Reference
~L
øA
~M
S2
Dimensions (mm)
Model
Series
A
L
M
S1
S2
FGG
FGG
FGG
FGG
FGG
FGG
001)
6.4
9.5
12.0
15.0
18.0
25.0
28.7
35.0
42.0
49.0
56.5
71.0
20.7
25.0
31.0
37.0
41.5
53.0
5.5
8.0
10.0
13.0
15.0
21.0
6
7
9
12
15
20
0B
1B
2B
3B
4B
M1
Cable assembly
(page 161)
Note: 1) the surface design of the 00 series is different.
2) to order, add a «Z» at the end of the reference.
S1
The bend relief must be ordered separately (see page 141).
JGG Straight plug, short version, key (G),
cable collet
Reference
Dimensions (mm)
~L
Model
Series
A
JGG
0B
9.5
L
M
S1
S2
8.0
7
øA
~M
S2
12
32.0 22.0
M4 Cable assembly (page 161)
S1
www.lemo.com
®
®
FFG Straight plug, non-latching, key (G)
or keys (A…M), cable collet
Reference
~L
øA
~M
S2
Dimensions (mm)
Model
Series
A
L
M
S1
S2
FFG
FFG
FFG
FFG
FFG
0B
1B
2B
3B
4B
9.5
12.0
15.0
18.0
25.0
36
43
50
58
75
26
32
38
43
57
8
10
13
15
21
7
9
12
14
20
M1 Cable assembly (page 161)
S1
FNG Straight plug, key (G) or keys (A…M and R),
cable collet and lanyard release
Reference
~L
Model
Series
A
FNG
FNG
FNG
FNG
FNG
FNG
0B
1B
2B
3B
4B
5B
9.5
12.0
15.0
18.0
25.0
35.0
B
L
15.5 36.0
18.0 43.0
21.0 49.0
25.0 58.0
32.0 75.0
42.0 103.0
M
N
S1
S2
26.0
32.0
37.0
43.0
57.0
78.0
140
140
160
190
230
300
8
10
13
15
21
31
7
9
12
14
20
30
B
N
øA
~M
Dimensions (mm)
M1 Cable assembly (page 161)
Note: cable material: stainless steel with Polyamide sheath.
S2
S1
FEG Straight plug, key (G) or keys (A…L),
cable collet, front seal
and nut for fitting a bend relief 1)
(IP 54 protection index when mated)
Reference
~L
øA
~M
S2
Dimensions (mm)
Model
Series
A
L
M
S1
S2
FEG
FEG
FEG
FEG
0B
1B
2B
3B
11.0
13.5
16.5
19.0
35.0
42.0
48.0
56.5
25.0
33.0
36.0
41.5
8
10
13
15
7
9
12
15
M1
Cable assembly
(page 161)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
S1
FDG Straight plug, long version,
key (G) or keys (A…L), cable collet
Reference
~L
øA
~M
S2
www.lemo.com
Dimensions (mm)
Model
Series
A
L
M
S1
S2
FDG
FDG
1B
2B
12
15
68
79
57
67
10
13
9
12
M2 Cable assembly (page 162)
S1
13
®
®
FIG
Straight plug for remote handling, key (G)
or keys (A…L and R), special alignment mark,
knurled handling surface, cable collet
Reference
Dimensions (mm)
Model
Series
A
L
M
N
S1
S2
S3
FIG
FIG
FIG
FIG
2B
3B
4B
5B
20
22
30
40
49
58
75
103
37
43
57
78
17.5
21.5
28.5
41.0
13
15
21
31
12
14
20
30
15
18
25
35
~L
N
øA
~M
S2
S1
M1 Cable assembly (page 161)
S3
FWG Fixed plug, nut fixing, key (G) or keys (A…L)
L maxi
øA
M
e
øB
Dimensions (mm)
Reference
N
S3
Model
Series
A
B
e
E
L
M
N1)
FWG
FWG
FWG
FWG
0B
1B
2B
3B
14.0
18.0
19.5
25.0
12.4
15.8
19.2
25.0
M9x0.6
M12x1.0
M15x1.0
M18x1.0
1.8
2.9
4.1
4.2
22.5
24.9
28.6
32.1
14.5
17.0
18.0
23.0
19.5
24.8
27.3
31.5
S1 S3
8.2
10.5
13.5
16.5
11
14
17
22
S1
E maxi
P9 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts
FAG Fixed plug, non-latching, nut fixing,
key (G) or keys (A…M and R)
Reference
Dimensions (mm)
L maxi
Model
Series
A
B
e
E
L
M
N1)
FAG
FAG
FAG
FAG
FAG
FAG
FAG
00
0B
1B
2B
3B
4B
5B
8
10
14
18
22
29
40
10.2
12.4
15.8
19.2
25.0
34.0
40.0
M7x0.5
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M25x1.0
M35x1.0
2.9
4.2
5.4
6.0
5.8
6.8
6.8
18.1
20.8
25.2
28.7
32.1
37.1
47.1
9.0
11.5
12.5
13.8
17.0
20.5
28.0
15.0
18.9
21.6
23.9
30.2
34.7
42.8
S1 S3
N
øA
M
e
øB
S3
E maxi
S1
6.3
8.2
10.5
13.5
16.5
23.5
33.5
9
11
14
17
22
30
–
P1 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts. The 5B series is delivered without locking washer or tapered washer and with a round nut.
FPG Elbow (90°) plug, key (G) or keys
(A…M and R), cable collet
L
M
~H
øA
Reference
S3
S2
D
14
Dimensions (mm)
Model
Series
A
D
H
L
M
S2
S3
FPG
FPG
FPG
FPG
00
0B
1B
2B
7.5
9.5
12.0
15.0
3.3
4.8
5.8
7.0
17.2
23.0
28.0
35.0
22.6
28.0
35.3
40.0
14.6
18.0
24.3
28.0
5
7
9
12
5.3
8.0
10.0
13.0
M3 Cable assembly (page 161)
www.lemo.com
®
®
FHG Elbow (90°) plug, key (G) or keys
(A…M and R), cable collet
L
S1
M
~H
øA
Reference
S3
S2
D
Model
Series
FHG
FHG
FHG
3B
4B
5B
Dimensions (mm)
A
D
H
L
M
19.0 10.0 37.0 50.0 35.0
26.0 15.0 52.0 67.0 49.0
36.0 21.0 74.0 90.0 65.0
S1
S2
S3
17
22
32
14
20
30
15.0
21.0
31.0
M3 Cable assembly (page 161)
FMG Elbow (90°) plug, key (G) or keys (A…M),
cable collet and lanyard release, long key 1)
L
S1
øA
M
~H
Reference
S3
B
N
S2
Dimensions (mm)
Model
Series
A
B
H
FMG
FMG
0B
3B
11
19
17
26
26 31.6 21.6 140
39 50.0 35.0 190
L
M
N
S1
S2
S3
10
17
7
14
8
15
M3 Cable assembly (page 161)
Note: 1) long key: only in 0B series and with key (G).
Cable material: stainless steel with Polyamide sheath.
FKG Elbow (90°) plug for remote handling, key (G)
or keys (A…L), special alignment mark,
knurled handling surface, cable collet
L
S1
M
~H
Reference
S4
S3
Model
Series
S2
FKG
FKG
FKG
3B
4B
5B
øA
N
Dimensions (mm)
A
H
L
M
N
S1
S2
S3
S4
25 37.0 50.0 35.0 21.0 17
32 52.0 67.0 49.0 28.5 22
46 74.2 89.5 64.5 40.0 32
14
20
30
15
21
31
21
26
38
M3 Cable assembly (page 161)
Note: dimension D is the same as for the FHG model.
EGG Fixed socket, nut fixing,
key (G) or keys (A…M and R)
Reference
Dimensions (mm)
L maxi
Model
Series
A
B
e
E
L
M
EGG
EGG
EGG
EGG
EGG
EGG
EGG
00
0B
1B
2B
3B
4B
5B
8
10
14
18
22
28
40
10.2
12.4
15.8
19.2
25.0
34.0
40.0
M7x0.5
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M25x1.0
M35x1.0
6.0
7.0
7.5
8.5
11.5
12.0
11.0
15.5
20.7
23.0
26.7
30.7
35.7
43.5
1.0
1.2
1.5
1.8
2.0
2.5
3.0
N1) S1
S3
N
M
øA
e
øB
S3
E maxi
S1
13.7
19.1
21.1
24.6
28.1
34.1
39.6
6.3
8.2
10.5
13.5
16.5
23.5
33.5
9
11
14
17
22
30
–
P1 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts.
The 5B series is delivered with a tapered washer and a round nut.
www.lemo.com
15
®
®
ENG Fixed socket with earthing tag,
nut fixing, key (G) or keys (A…M)
L maxi
Reference
N
M
øA
e
øB
S3
E maxi
Dimensions (mm)
Model
Series
A
B
e
E
L
M
ENG
ENG
ENG
ENG
ENG
0B
1B2)
2B
3B
4B
10
14
18
22
28
12.4
15.8
19.2
25.0
34.0
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M25x1.0
7.0
7.5
8.5
11.5
12.0
20.7
23.0
26.7
30.7
35.7
1.2
1.5
1.8
2.0
2.5
N1) S1
19.1
21.1
24.6
28.1
34.1
8.2
10.5
13.5
16.5
23.5
S3
11
14
17
22
30
S1
P1 Panel cut-out (page 152)
Note:
1)
2)
maximum length with crimp contacts.
for the 1B series the earthing tag is on the same side of the key.
EKG Fixed socket, nut fixing, key (G) or keys
(A…L and R), special alignment mark
on the front
L maxi
M
e
øA
S3
øB
Dimensions (mm)
Reference
N
E maxi
Model
Series
A
B
e
E
L
M
EKG
EKG
EKG
EKG
2B
3B
4B
5B
18
22
28
40
19.2
25.0
34.0
40.0
M15x1.0
M18x1.0
M25x1.0
M35x1.0
8.5
11.5
12.0
11.0
26.7
30.7
35.7
43.5
1.8
2.0
2.5
3.0
N1) S1
24.6
28.1
34.1
39.6
13.5
16.5
23.5
33.5
S3
17
22
30
–
S1
P1 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts.
The 5B series is delivered with a tapered washer and a round nut.
ESG Fixed socket with two round nuts,
key (G) or keys (A…L), long threaded shell
(back panel mounting)
L maxi
N
3.2 mini
øA
e
øB
øC
Dimensions (mm)
Reference
M
E maxi
S1
Model
Series
ESG
ESG
00
1B
A
B
C
e
E
L
9
9 9.5 M7x0.5 3.2 15.5
14 14 16.0 M12x1.0 8.0 23.0
M
2
2
N1)
S1
13.7 –
21.1 10.5
P1 Panel cut-out 1B series (page 152)
P2 Panel cut-out 00 series (page 152)
Note: 1) maximum length with crimp contacts.
EHG Fixed socket, nut fixing, key (G)
or keys (A…M and R), and protruding shell
Reference
Dimensions (mm)
L maxi
N
øA
M
e
øB
S3
E maxi
S1
Model
Series
A
B
e
E
L
M
N1)
EHG
EHG
EHG
EHG
EHG
EHG
00
0B
1B
2B
3B
5B
8.0
10.0
14.0
18.0
22.0
40.0
10.2
12.4
15.8
19.2
25.0
40.0
M7x0.5
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M35x1.0
2.0
2.0
4.0
5.1
7.1
2.5
15.5
19.5
21.7
22.7
30.7
43.5
8.5
12.5
12.0
12.5
13.5
28.0
13.7
19.1
21.1
24.6
30.3
38.5
S1 S3
6.3
8.2
10.5
13.5
16.5
33.5
9
11
14
17
22
–
P1 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts.
The 5B series is delivered without locking washer or tapered washer and
with a round nut.
16
www.lemo.com
®
®
EJG Fixed socket, press or adhesive fit,
key (G) or keys (A…M)
L maxi
Dimensions (mm)
Reference
N
øA
øB
M
Model
Series
EJG
EJG
EJG
0B
1B
2B
A
B
L
9.2 8.35 20.7
12.5 11.20 23.0
16.5 14.00 26.7
M
N1)
1.5
1.5
1.5
19.1
21.1
24.6
P5 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts.
EEG Fixed socket, nut fixing, key (G) or keys (A…M and R)
(back panel mounting)
L maxi
Dimensions (mm)
Reference
N
Model
Series
A
B
e
E
L
M
N1)
EEG
EEG
EEG
EEG
EEG
EEG
00
0B
1B
2B
3B
5B
10
12
16
20
24
41
9.5
12.5
16.0
20.0
25.0
40.0
M7x0.5
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M35x1.0
2.3
2.4
6.5
3.0
5.0
13.5
15.5
20.7
23.0
26.7
30.7
43.5
2.5
2.5
3.5
3.5
4.5
5.0
13.7 6.0 6.3 7.5
19.1 6.3 8.2 9.0
21.1 11.0 10.5 13.0
24.6 9.0 13.5 15.0
28.1 12.0 16.5 20.0
39.6 19.5 33.5 38.0
P
S1
S2
P
e
øB
øA
M
S1
S2
E maxi
P1 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts. The 3B and 5B series are delivered with a
conical nut. The 5B series is delivered without locking washer or tapered washer.
EFG Fixed socket, nut fixing, key (G) or keys (A…M),
with two flats on the shell and O-ring
(back panel mounting)
L maxi
N
P
M
øA
e
øB
Reference
E maxi
S2
Model
Series
EFG
0B
Dimensions (mm)
N1)
P
S2
12 12.5 M9x0.6 5.5 20.7 2.5 19.1
9
8
A
B
e
E
L
M
P2 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts.
ECG Fixed socket with two nuts, key (G) or keys (A…M and R)
(back panel mounting)
Reference
L maxi
Dimensions (mm)
Model
Series
A
B
e
E
L
M
N1)
S1
S3
ECG
ECG
ECG
ECG
ECG
ECG
ECG
00
0B
1B
2B
3B
4B
5B
10
12
16
20
24
30
41
10.2
12.4
15.8
19.2
25.0
34.0
40.0
M7x0.5
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M25x1.0
M35x1.0
4.3
5.5
6.0
6.5
9.0
10.0
9.0
13.7
20.7
23.0
26.7
30.7
35.7
43.5
2.5
2.5
3.5
3.5
4.5
4.5
5.0
13.7
19.1
21.1
24.6
28.1
32.6
39.6
6.3
8.2
10.5
13.5
16.5
23.5
33.5
9
11
14
17
22
30
–
N
M
øA
e
øB
S3
S1
E maxi
P1 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts. The 3B, 4B and 5B series are delivered
with a conical nut. The 5B series is delivered with a tapered washer and a round nut.
www.lemo.com
17
®
®
ECG Fixed socket with two nuts, key (G) or keys (A…F and R)
and straight contact for printed circuit
(back panel mounting)
Dimensions (mm)
Reference
L
N
M
øA
e
øB
S3
E maxi
S1
Model
Series
A
B
e
ECG
ECG
ECG
ECG
ECG
ECG
ECG
00
0B
1B
2B
3B
4B
5B
10
12
16
20
24
30
41
10.2
12.4
15.8
19.2
25.0
34.0
40.0
E
M7x0.5 4.3
M9x0.6 5.5
M12x1.0 6.0
M15x1.0 6.5
M18x1.0 9.0
M25x1.0 10.0
M35x1.0 9.0
P1 Panel cut-out (page 152)
M
N
S1
S3
2.5
2.5
3.5
3.5
4.5
4.5
5.0
13.7
16.1
19.8
21.8
25.8
29.8
36.8
6.3
8.2
10.5
13.5
16.5
23.5
33.5
9
11
14
17
22
30
–
P15 PCB drilling pattern (page 154)
Note: this contact type is available for E●● socket models fitted with female contacts.
Length «L» depends on the number of contacts, see table on page 156.
The 5B series is delivered with a tapered washer and a round nut.
The 3B, 4B and 5B series are delivered with a conical nut.
ECG Fixed socket with two nuts, key (G) or keys (A…F) with
elbow (90°) contact for printed circuit (back panel mounting)
e
20 mini
øA
M
S1
øB
S3
Dimensions (mm)
Reference
N
L
Model
Series
A
ECG
ECG
ECG
ECG
0B
1B
2B
3B
12
16
20
24
B
e
E
12.4 M9x0.6 5.5
15.8 M12x1.0 6.0
19.2 M15x1.0 6.5
25.0 M18x1.0 9.0
M
2.5
3.5
3.5
4.5
N
S1
max
18.3 8.2
20.3 10.5
22.3 13.5
25.8 16.5
S3
11
14
17
22
E maxi
P1 Panel cut-out (page 152)
2
P17 PCB drilling pattern (page 157)
Note: this female contact type is available for all back panel mounting socket models.
Length «L» depends on the number of contacts, see PCB drilling pattern on page 157.
For male contacts, sockets are available upon request, with J, K or L keys.
The 3B series is delivered with a conical nut.
EZG Straight socket for printed circuit, key (G) or keys (A, B)
Reference
B
Model
Series
A
B
H
K
N
EZG
00
6.8
7
5.08
7
14
H
N
øA
ø 0.5
ø 0.7
3
Dimensions (mm)
P15 + P16 PCB drilling pattern (pages 154 and 156)
K
EZG Straight socket for printed circuit, key (G) or keys (A…F)
Reference
H
N
øA
M 1.6
B
L
Dimensions (mm)
Model
Series
A
EZG
EZG
EZG
0B
1B
2B
9
11
14
B
H
10
7.62
12
7.62
15 10.16
K
N
8
8
9
15.0
19.0
22.5
P15 + P16 PCB drilling pattern (pages 154 and 156)
K
18
Note: Length «L» depends on the number of contacts, see table on page 156.
www.lemo.com
®
®
EYG Fixed socket for printed circuit, nut fixing,
key (G) or keys (A…F) (back panel mounting)
Reference
N
L
9
P
B
S1
M 1.6
M
e
Series
EYG
EYG
EYG
0B
1B
2B
A B
C
D
e
E
M
N
P
S1
12 10 12.5 7.62 M9x0.6 2.6 2.5 15.0 6.0 8.2
14 12 16.0 7.62 M11x0.5 5.0 3.5 19.0 10.0 –
20 15 19.5 10.16 M15x1.0 7.5 3.5 22.5 13.5 13.5
P1 Panel cut-out 0B and 2B series (page 152)
P10 Panel cut-out 1B series (page 152)
øA
øC
D
Model
Dimensions (mm)
P15 + P16 PCB drilling pattern (pages 154 and 156)
E maxi
Note: Length «L» depends on the number of contacts, see page 156.
XPF Fixed socket, nut fixing, long shell,
keys (F) for printed circuit
(back panel mounting)
Reference
N
L
P
M
5.08
Model
Series
XPF
0B
Dimensions (mm)
A
B
e
E
M
N
P
R
12 11 M9x0.6 1.5 2.5 19
5
4
øA
e
øB
P2 Panel cut-out (page 152)
P15 + P16 PCB drilling pattern (pages 154 and 156)
R
1
E maxi
Note:
Length «L» depends on the number of contacts, see table on page 156.
PHG Free socket, key (G) or keys (A…M and R),
cable collet
Reference
øA
~L
S2
S1
Dimensions (mm)
Model
Series
A
L
S1
S2
PHG
PHG
PHG
PHG
PHG
PHG
PHG
001)
6.8
9.5
12.5
16.5
19.0
26.0
36.0
26.0
35.5
40.5
47.0
56.0
73.0
99.0
5.5
8.0
10.0
13.0
15.0
21.0
31.0
5
7
9
12
14
20
30
0B
1B
2B
3B
4B
5B
Note:
1) the surface design of
the 00 series is different.
M1 Cable assembly (page 161)
PHG Free socket, key (G) or keys (A…M),
cable collet and nut for fitting a bend relief 2)
Reference
øA
~L
S2
Dimensions (mm)
Model
Series
A
L
S1
S2
PHG
PHG
PHG
PHG
PHG
PHG
001)
6.8
9.5
12.5
16.5
19.0
26.0
34.0
34.5
39.5
46.0
54.5
69.0
5.5
8.0
10.0
13.0
15.0
21.0
6
7
9
12
15
20
0B
1B
2B
3B
4B
Note:
1) the surface design of
the 00 series is different.
2) to order, add a «Z» at
the end of the reference.
S1
M1 Cable assembly (page 161)
Note: The bend relief must be ordered separately (see page 141).
www.lemo.com
19
®
®
PNG Free socket, nut fixing, key (G) or keys
(A…L and R), cable collet with lanyard release
Reference
Model
Series
A
B
L
N
S1
S2
PNG
PNG
PNG
PNG
PNG
1B
2B
3B
4B
5B
12.4
16.5
19.0
26.0
36.0
18.4
22.5
26.0
33.0
43.0
40.5
47.0
56.0
73.0
99.0
140
160
190
230
300
10
13
15
21
31
9
12
14
20
30
B
N
øA
~L
Dimensions (mm)
M1 Cable assembly (page 161)
Note: cable material: stainless steel with Polyamide sheath
S2
S1
PKG Fixed socket, nut fixing, key (G)
or keys (A…M and R), cable collet
Reference
~L
M
øB
e
øA
S3
Dimensions (mm)
Model
Series
A
B
PKG
PKG
PKG
PKG
PKG
PKG
PKG
00
0B
1B
2B
3B
4B
5B
8
10
14
18
22
28
40
10.2
12.4
15.8
19.2
25.0
34.0
40.0
e
E
L
M
M7x0.5 6.5 26.0 1.0
M9x0.6 7.0 35.5 1.2
M12x1.0 7.5 40.5 1.5
M15x1.0 8.5 47.0 1.8
M18x1.0 11.5 56.0 2.0
M25x1.0 12.0 73.0 2.5
M35x1.0 11.0 99.0 3.0
S1 S2 S3
6.3
8.2
10.5
13.5
16.5
23.5
33.5
5
7
9
12
14
20
30
9
11
14
17
22
30
–
P1 Panel cut-out (page 152)
S2
E maxi
S1
M1 Cable assembly (page 161)
Note: the 5B series is delivered with a tapered washer and a round nut.
PFG Fixed socket, with two nuts, key (G) or keys
(A…M and R), cable collet (back panel mounting)
Reference
~L
M
øA
e
øB
S3
Dimensions (mm)
Model
Series
A
B
e
E
L
M
PFG
PFG
PFG
PFG
PFG
PFG
PFG
00
0B
1B
2B
3B
4B
5B
10
12
16
20
24
30
41
10.2
12.4
15.8
19.2
25.0
34.0
40.0
M7x0.5
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M25x1.0
M35x1.0
5.3
5.0
5.0
6.5
9.0
11.0
10.0
26.0
35.5
40.5
47.0
56.0
73.0
99.0
2.5
2.5
3.5
3.5
4.5
4.5
5.0
S1 S2 S3
6.3
8.2
10.5
13.5
16.5
23.5
33.5
5
7
9
12
14
20
30
9
11
14
17
22
30
–
P1 Panel cut-out (page 152)
S2
S 1 E maxi
M1 Cable assembly (page 161)
Note: the 3B, 4B and 5B series are delivered with a conical nut.
The 5B series is delivered with a tapered washer and a round nut.
20
www.lemo.com
®
®
PEG Fixed socket, nut fixing, key (G) or keys (A…L),
cable collet (back panel mounting)
P
S1
e
øA
M
øB
S2
Dimensions (mm)
Reference
~L
Series
A
B
e
E
PEG
PEG
3B
4B
24
32
25 M18x1.0 5.0
34 M25x1.0 12.5
L
M
S1
56
73
4.5 16.5
5.0 23.5
S2
S4
P
14
20
20
27
12
20
P1 Panel cut-out (page 152)
M1 Cable assembly (page 161)
S4
E maxi
Model
Note: the 4B series has an o-ring on the flange.
R ● ● Fixed coupler, nut fixing, key (G) or keys (A and J) at the flange end and keys (J, K or M) at the other end
L
e
øA
M
E maxi
Reference
G
RGG
G
J
RJG
G
G
RGJ
J
A
RAK
K
G
M
RGM
Example
Type
0B
0B
female – female
female – female
male – female
female – male
female – male
female – male
female – female
male – female
female – male
male – female
female – male
female – male
female – male
0B
1B
1B
2B
3B
4B
Dimensions (mm)
A
B
e
E
L
M
S1 S3
12 13.8 M10x0.75
12 13.8 M10x0.75
8.0 34 2.0
8.0 43 2.0
9.0 12
9.0 12
12 13.8 M10x0.75
8.0 34 2.0
9.0 12
16 19.2 M14x1.00
8.5 47 2.5 12.5 17
16 19.2 M14x1.00
8.5 39 2.5 12.5 17
20 21.5 M16x1.00 12.0 44 4.0 15.0 19
25 27.0 M20x1.00 32.0 53 4.0 18.5 24
34 34.0 M25x1.00 50.0 65 4.0 23.5 30
Plug with key J
Alignment key see page 31.
www.lemo.com
RGG 1)
RGG 2)
RJG
RGJ
RAK
RGM
RGG 3)
RJG
RGJ
RJG
RGJ
RGJ
RGJ
Series
S1
P4 Panel cut-out (page 152)
RGJ
Plug with key G
Model
Contacts
øB
S3
Note:
1) only available with two contacts.
2) RGG.0B only available from 3 till 5 contacts.
3) RGG.1B only available till 7 contacts.
For this fixed coupler, the first contact type mentioned is always the one at the flange end. On request, these
couplers can be produced in other series, with other keys.
21
®
®
Elbow socket models
Technical Characteristics
Materials and Treatment
Types
Surface
treat. (µm)
Material
Component
Cu
PPS
Brass
Brass
Bronze
PEEK
Bronze
Housing
Type
1
1
0B, 1B
00
302
1
1
2
1
303
3
1
1
Electrical
2
0B, 1B
00
4
3
2
3
2
304
3
1
4
3
2
3
1
4
2
3
Model
Series
EPG-XBG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG
00
0B
0B
0B
0B
0B
0B
0B
1B
1B
1B
1B
1B
1B
1B
1B
1B
Types
1
305
0B, 1B
1
5
4
2
3
0B, 1B
306
6
5
4
1
2
3
2
5
4
3
1
6
3
4
5
2
1
0B, 1B
307
7
2
6
1B
5
4
2
3
4
8
1
7
1
6
2
5
7
4
3
6
308
1
2
7
3 8 6
4 5
309
2
3
5
3
4
1 8
0B
1B
9
8
7
1
2
6
3
7
6
7
6
4
310
10
8
9
4 5
5
9
1.5
Note:
The surface treatment standards are as follows:
– Nickel: SAE AMS QQ N 290. – Gold: ISO 27874
2
0B, 1B
00
0.5
2
2
5
1 8
2 9 7
3 10 6
4 5
302-303-304
302
303
304
305
306
307
309
302
303
304
305
306
307
308
310
314
Rated
current (A)1)
Series
2
–
–
–
Test voltage
(kV rms)1)
Contact-shell
1
0.5
0.5
0.5
Au
–
3
3
3
–
3
Test voltage
(kV rms)1)
Contact-contact
Series
Metallic parts
Earthing crown
Insulator
Female contact
Ni
1.00
1.45
1.70
1.30
1.25
1.25
1.00
1.00
1.70
1.60
1.70
1.30
1.35
1.45
1.30
1.00
1.00
1.00
1.20
1.60
1.10
1.20
1.20
1.00
1.10
1.45
1.85
1.80
1.55
1.45
1.45
1.30
1.00
1.30
2.0
4.5
4.5
4.5
4.5
2.5
2.0
1.5
4.5
4.5
4.5
4.5
4.5
2.0
2.0
1.5
1.0
Note:
1) see calculation method, caution and suggested standard on page 178.
øA
12.7
EPG Elbow (90°) socket for printed circuit,
key (G) or keys (A…F) (solder or screw fixing)
L
N
Reference
K
EPG.1B.314.NLN
A
D
11
21
Dimensions (mm)
H
I
K
L
7.7 14.3
19
N
36 15.4
3
H
I
P20 PCB drilling pattern (page 158)
22
Note: to replace the 4 ground pins by 4 screws (M1.6) add an «S» to the
end of the part number. (e.g.: EPG.1B.314.NLNS)
ø 0.7
ø 0.6 M 1.6
D
www.lemo.com
®
®
EPG Elbow (90°) socket for printed circuit,
key (G) or keys (A…F) (solder or screw fixing)
Reference
øA
R
EPG.00.302.HLN
EPG.00.303.HLN
EPG.00.304.HLN
EPG.0B.302.HLN
EPG.0B.303.HLN
EPG.0B.304.HLN
EPG.0B.305.HLN
EPG.0B.306.HLN
EPG.0B.307.HLN
EPG.0B.309.HLN
EPG.1B.302.HLN
EPG.1B.303.HLN
EPG.1B.304.HLN
EPG.1B.305.HLN
EPG.1B.306.HLN
EPG.1B.307.HLN
EPG.1B.308.HLN
EPG.1B.310.HLN
L
N
3.0 (00)
3.2 (0B-1B)
H
I
K
ø 0.7
M 1.6
A
Dimensions (mm)
H
I
K
L
D
6.8 11.5 3.5
7.0
8.7
19
N
R
7.1 5.08
9.0 14.6 6.7 12.6 13.3
25 11.7 7.62
11.0 16.6 7.5 14.0 13.3
27 12.6 7.62
D
P18 PCB drilling pattern 00 series (page 158)
ø 0.5 (00)
ø 0.7 (0B-1B)
P19 PCB drilling pattern 0B, 1B series (page 158)
Note: In the 0B and 1B series, it is possible to replace the 4 ground pins by 4 screws (M1.6)
add an «S» to the end of the part number. (e.g.: EPG.0B.307.HLNS)
EXG Elbow (90°) socket for printed circuit with two nuts,
key (G) or keys (A…F) (solder or screw fixing)
(back panel mounting)
XBG Elbow (90°) socket fixing nut for printed circuit,
key (G) or keys (A, B) (back panel mounting)
R
N
Reference
K
L
S3
e
øB
3.0 (00)
3.2 (0B-1B)
H
I
øA
M
M 1.6
ø 0.5 (00)
ø 0.7 (0B-1B)
E maxi
D
XBG.00.302.HLN
XBG.00.303.HLN
XBG.00.304.HLN
EXG.0B.302.HLN
EXG.0B.303.HLN
EXG.0B.304.HLN
EXG.0B.305.HLN
EXG.0B.306.HLN
EXG.0B.307.HLN
EXG.0B.309.HLN
EXG.1B.302.HLN
EXG.1B.303.HLN
EXG.1B.304.HLN
EXG.1B.305.HLN
EXG.1B.306.HLN
EXG.1B.307.HLN
EXG.1B.308.HLN
EXG.1B.310.HLN
A
B
D
e
Dimensions (mm)
E H
I
K
L
M
N
R S3
10 10.2 11.5 M7x0.5 2.1 3.5 7.0 8.7 19 2.5 7.1 5.08 9
12 12.4 14.6 M9x0.6 6.0 6.7 12.6 13.3 25 2.5 11.7 7.62 11
14 15.0 16.6 M11x0.5 7.5 7.5 14.0 13.3 27 3.5 12.6 7.62 13
P2 Panel cut-out 00, 0B series (page 152)
P10 Panel cut-out 1B series (page 152)
Note: In the 0B and 1B series, it is possible to replace the 4
ground pins by 4 screws (M1.6) add an «S» to the end of
the part number. (e.g.: EXG.0B.307.HLNS).
www.lemo.com
P18 PCB drilling pattern 00 series (page 158)
P19 PCB drilling pattern 0B, 1B series (page 158)
23
®
®
Plastic housing models
These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The
design, including a latch sleeve and a metal earthing crown, guarantees EMC screening efficiency to meet most requirements.
Technical Characteristics
Mechanical and Climatical
Characteristics
Value
PSU
PEEK
Colour
Endurance
Humidity
Temperature range
Sterilization resistance 1)
Resistance to solvents
Standard
PPSU
natural (beige)
> 5000 cycles
white or grey
cream
–
> 5000 cycles > 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C
–
- 50° C/+250° C - 50° C/+150° C - 50° C/+180° C
–
> 200 cycles
~20 cycles
> 100 cycles
IEC 60601-1 § 44.7
very good
limited
good
–
Note: 1) Steam sterilization
FGG Straight plug, key (G or J), cable collet,
PEEK outer shell
Reference
~L
øA
~M
Model
Series
FGG
FGG
FGG
1B
3B
4B
Dimensions (mm)
A
L
M
S2
13.5 43.0 32.0
19.0 62.0 47.0
26.0 78.5 60.5
10
15
20
M1 Cable assembly (page 161)
S2
FGG Straight plug, key (G or J), cable collet, PEEK
outer shell and nut for fitting a bend relief 1)
Reference
Dimensions (mm)
Note on availability
~L
øA
~M
Model
Series
FGG
FGG
1B
4B
A
L
M
S2
13.5 42.2 31.2 10 for all collet type
26.0 83.2 65.2 20 only from collet M82 and up
M1 Cable assembly (page 161)
Note: 1) to order, add a «Z» at the end of the reference.
S2
The bend relief must be ordered separately (see page 141).
FGY Straight plug, keys (Y), cable collet
and PSU or PPSU outer shell
Reference
Model
Series
FGY
FGY
FGY
2B
3B
4B
Dimensions (mm)
A
L
M
S2
~L
16.5 50.5 39.5
19.0 58.0 43.0
26.0 76.2 58.2
13
15
20
øA
~M
M1 Cable assembly (page 161)
S2
24
www.lemo.com
®
®
FGY Straight plug, keys (Y), cable collet
and PSU or PPSU outer shell and nut for fitting
a bend relief 1)
Reference
Dimensions (mm)
Note on availability
~L
øA
~M
Model
Series
FGY
FGY
FGY
2B
3B
4B
A
L
M
S2
16.5 49.5 38.5 13
19.0 56.5 41.5 15
26.0 74.4 56.4 20
only for collet M42 and up
only for collet D62 and up
only for collet M82 and up
M1 Cable assembly (page 161)
Note: 1) to order, add a «Z» at the end of the reference.
S2
The bend relief must be ordered separately (see page 141).
ENG Fixed socket with earthing tag, nut fixing,
key (G or J), PEEK outer shell
L maxi
N
øA
e
øB
Reference
Dimensions (mm)
M
S3
E maxi
S1
Model
Series
ENG
ENG
ENG
1B
3B
4B
A
B
e
E
L
M
N1) S1
S3
14 15.8 M12x1.0 7.5 23.0 1.5 21.1 10.5 14
22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22
28 34.0 M25x1.0 12.0 35.7 2.5 32.6 23.5 30
P1 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts.
ENY Fixed socket with earthing tag, nut fixing,
keys (Y), PSU or PPSU outer shell
L maxi
N
E maxi
Dimensions (mm)
Reference
M
øA
e
øB
S3
S1
Model
Series
ENY
ENY
ENY
2B
3B
4B
A
B
e
E
L
M
N1) S1
S3
18 19.2 M15x1.0 8.5 26.7 1.8 24.6 13.5 17
22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22
28 34.0 M25x1.0 12.0 35.7 2.5 32.6 23.5 30
P1 Panel cut-out (page 152)
Note: 1) maximum length with crimp contacts.
Note: other models with plastic outer shell are available on request.
www.lemo.com
25
®
®
Watertight or vacuumtight models
These plug, socket and coupler models allow the device on which they are fitted to reach a protection index of IP68 as per
IEC 60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at
the end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance
Humidity
Temperature range (00 to 1B)
Temperature range (2B to 5B)
Salt spray corrosion test
Climatical category
Leakage rate (He)1)
Value
Standard
Characteristics
> 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 20° C/+100° C
- 20° C/+80° C
> 1000h
IEC 60512-6 test 11f
20/80/21
IEC 60068-1
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
Note: 1) only for vacuumtight models.
Value
00
0B
1B
2B
3B
4B
5B
Maximum operating
pressure2)
Standard
60 bar
60 bar
60 bar
40 bar
30 bar
15 bar
5 bar
IEC 60512-7 test 14d
Note: 2) this value corresponds to the maximum allowed pressure difference for the assembled socket.
YHG Fixed plug, nut fixing, non-latching,
key (G) or keys (A…M)
øA
M
e
øB
S3
Dimensions (mm)
Reference
L maxi
Model
Series
A
YHG
YHG
YHG
YHG
0B
1B
2B
3B
13.0
16.0
19.0
22.0
B
e
E
12.4 M9x0.6 2.4
15.8 M12x1.0 3.9
19.2 M15x1.0 5.5
25.0 M18x1.0 5.1
L
24.1
28.0
33.1
38.2
M
S1
S3
14.2 8.2
16.2 10.5
17.8 13.5
22.2 16.5
11
14
17
22
S1
E maxi
P9 Panel cut-out (page 152)
Note: this model does not include an O-ring behind the flange, it ensures
only IP61 protection index. Consequently, it is not vacuumtight. Watertightness (when mated) is only ensured with HHG and HCG sockets.
HGG Fixed socket, nut fixing, key (G) or keys
(A…M and R), watertight or vacuumtight
Dimensions (mm)
Reference
L maxi
øA
M
e
øB
S3
E maxi
S1
Model
Series
A
B
HGG
HGG
HGG
HGG
HGG
HGG
HGG
00
0B
1B
2B
3B
4B
5B
11
13
18
20
25
34
45
10.2
12.4
15.8
19.2
25.0
34.0
40.0
e
E
L
M
S1
S3
M7x0.5 8.0 18.0 1.5
M9x0.6 7.0 21.5 3.0
M12x1.0 7.0 26.6 4.5
M15x1.0 8.0 31.6 4.0
M18x1.0 11.5 36.1 4.0
M25x1.0 11.0 43.1 4.0
M35x1.0 11.0 53.6 5.0
–
8.2
10.5
13.5
16.5
23.5
33.5
9
11
14
17
22
30
–
P9 Panel cut-out (page 152)
Note: the 5B series is delivered with a tapered washer and a round nut.
26
www.lemo.com
®
®
HNG Fixed socket, nut fixing, with earthing tag,
key (G) or keys (A…M), watertight or vacuumtight
Dimensions (mm)
Reference
L maxi
øA
M
e
øB
S3
Model
Series
HNG
0B
A
B
e
13 12.4 M9x0.6
E
L
M
S1
S3
7
21.5
3
8.2
11
P9 Panel cut-out (page 152)
S1
E maxi
HHG Fixed socket, nut fixing, key (G) or keys (A…M),
watertight or vacuumtight (watertight when mated)
Dimensions (mm)
Reference
L maxi
M
øA
e
øB
S3
Model
Series
A
HHG
HHG
HHG
HHG
0B
1B
2B
3B
13
18
22
25
B
e
E
12.4 M9x0.6 7.0
15.8 M12x1.0 7.0
19.2 M15x1.0 8.0
25.0 M18x1.0 11.5
L
24.5
30.3
35.6
41.3
M
S1
S3
4.8
8.2
5.2 10.5
6.0 13.5
7.2 16.5
11
14
17
22
P9 Panel cut-out (page 152)
E maxi
S1
Note: this model ensures watertightness (IP66) in the mating area when mated with FGG
or similar plug.
HCG Fixed socket, nut fixing, key (G) or keys (A…M),
watertight or vacuumtight
(watertight when mated) (back panel mounting)
Dimensions (mm)
Reference
L maxi
P
e
e1
øB
øC
øA
M
F maxi
Model
Series
A
B
C
e
e1
E
F
L
M
P
S1
HCG
HCG
HCG
0B
1B
2B
18
20
24
18 12.0 M14x1.0 M9x0.6 3.9 1.0 24.5 3.5 7.5 12.5
20 14.5 M16x1.0 M12x1.0 6.2 2.0 30.3 3.5 10.0 14.5
24 17.5 M19x1.0 M14x1.0 6.7 1.5 35.6 3.5 11.3 17.0
P3 Panel cut-out (page 152)
E maxi
S1
Note: this model ensures watertightness (IP66) in the mating area when mated with FGG
or similar plug.
HEG Fixed socket, nut fixing, key (G) or keys (A…M),
watertight or vacuumtight (back panel mounting)
Dimensions (mm)
Reference
L maxi
P
Series
A
B
e
E
HEG
HEG
HEG
HEG
00
0B
1B
2B
10
12
16
20
11 M7x0.5 2.5
13 M9x0.6 5.5
18 M12x1.0 6.5
20 M15x1.0 5.0
L
18.2
21.5
26.6
31.6
M
P
S1
S2
2.5 6.0 6.3
2.5 9.0 8.2
3.5 11.0 10.5
3.5 9.6 13.5
–
–
–
15
øA
M
e
øB
S2 S1
Model
P9 Panel cut-out (page 152)
E maxi
www.lemo.com
27
®
®
HMG Fixed socket with earthing tag, nut fixing,
key (G) or keys (A…M),
watertight or vacuumtight (back panel mounting)
L maxi
e
øA
M
øB
Dimensions (mm)
Reference
P
S1
E maxi
Model
Series
A
B
e
E
L
HMG
HMG
HMG
HMG
HMG
00
0B
1B
2B1)
3B
10
12
16
20
24
11 M7x0.5 2.5 18.0
13 M9x0.6 5.5 21.5
18 M12x1.0 5.5 26.6
20 M15x1.0 5.5 31.6
25 M18x1.0 7.5 36.1
M
P
S1
2.5 6.0 6.3
2.5 9.0 8.2
3.5 11.0 10.5
3.5 9.6 13.5
4.5 14.0 16.5
P9 Panel cut-out (page 152)
Note: 1) the surface design of the 2B series is different.
The 3B series is delivered with a conical nut.
S ● ● Fixed coupler, nut fixing, key (G) or keys (A, B, J, K and L) at the flange end and key (G)
or keys (A, B, J, K and L) at the other end, watertight or vacuumtight
L
S1
øA
M
e
øB
S3
E maxi
Reference
Model
G
SGJ
J
J
SJG
G
K
A
SKA
L
SLB
B
A
SAK
K
B
SBL
L
Example
0B
1B
2B
3B
4B
5B
Type
female – male
male – female
female – male
male – female
female – male
male – female
female – male
male – female
female – male
female – male
female – male
female – male
female – male
male – female
female – male
male – female
male – female
male – female
female – male
female – male
Dimensions (mm)
A
B
e
E
L
M
S1
S3
14 13.8 M10x0.75 17
34
2.0
9.0
12
17 15.8 M12x1.00 28
39
2.5 10.5
14
20 21.5 M16x1.00 25
44
4.0 15.0
19
25 27.0 M20x1.00 30
53
4.0 18.5
24
34 34.0 M25x1.00 50
65
4.0 23.5
30
45 40.0 M35x1.00 58
80
5.0 33.5
–
P4 Panel cut-out (page 152)
SGJ
Plug with key G
SGJ
SJG
SGJ
SJG
SGJ
SJG
SGJ
SJG
SAK
SBL
SAK
SBL
SGJ
SJG
SGJ
SJG
SKA
SLB
SAK
SBL
Series
Contacts
Plug with key J
P9 Panel cut-out 1B series (page 152)
Alignment key see page 31.
28
Note: for this fixed coupler, the first contact type mentioned is always the one at the flange end.
On request these couplers can be produced in other series, with other keys.
The 5B series is delivered with a round nut.
www.lemo.com
®
®
Bridge models
Technical Characteristics
Mechanical and Climatical
Characteristics
Value
IEC 60512-2 test 2a
Rated
current (A)
< 6 mΩ
Test voltage
(kV rms) 1) 2)
Contact resistance
> 1000 cycles IEC 60512-5 test 9a
maximum 90° C
0B
0B
0B
0B
0B
1B
1B
1B
1B
●
●
●
●
–
●
●
–
–
–
–
–
–
●
–
–
●
●
1.05
1.05
0.80
0.80
0.40
1.25
1.25
0.80
0.80
4
4
4
4
2
5
5
3
3
Materials and Treatment
Component
Plastic housing
Polyamide
Brass
Brass
PEEK
Brass
Bronze
Metallic parts
Insulator
Male contact
Female contact
–
0.5
0.5
3
3
0.5
0.5
3
3
–
0.3
–
–
–
–
1.0
1.5
–
Note: the surface treatment standards are as follows:
– Nickel: SAE AMS QQ N 290, chrome: SAE AMS 2460, gold: ISO 27874
CFF
Reference
Surface treat. (µm)
Cu Ni Cr Au
Material
CRG
Standard
Audio-Stereo
Endurance
Working temperature
Standard
Audio-Mono
Value
Series
Characteristics
Electrical
CFF.0B.302.PLCG
CRG.0B.302.PLEG
CFF.0B.303.PLCG
CRG.0B.303.PLEG
CRG.0B.306.PLEG
CFF.1B.303.PLCG
CRG.1B.303.PLEG
CFF.1B.306.PLCG
CRG.1B.306.PLEG
Note: the last letter of the part number indicates the colour of the housing. Ex.
G (standard) is grey. To obtain another colour, replace this letter by the letter
corresponding to the selected colour (see table on page 54).
1) see calculation method, caution and suggested standard on page 178.
2) lowest measured value; contact to contact or contact to shell.
CFF Bridge plug with two non-latching plugs
CRG Bridge plug with two non-latching plugs,
and monitoring socket, key (G) or keys (A…M)
M maxi
A
Dimensions (mm)
N
B
H
Reference
Model
Series
A
B
H
CFF-CRG
CFF-CRG
0B
1B
13.5
15.0
14
20
L
M
N
27.5 37.2 27.2 22.5
35.0 42.0 31.0 22.0
Note: in order to provide the user with a coding system, the bridge plug housing, the double panel washers and the bend reliefs are available in nine colours.
L maxi
Rated
current (A)
2
3
4
1.05
0.80
0.80
4
4
3
FTG.0B.302.PLFG
FTG.0B.303.PLFG
FTG.0B.304.PLFG
37.8
15
Test voltage
(kV rms) 1)
Reference
Number
of contacts
FTG Straight plug, key (G) and two parallel sockets
27.8
Type 302
Type 303
Type 304
1
1
12
24
1
1
3
2
1
1
2
www.lemo.com
3
2
2
2
Note:
1) see calculation
method, caution
and suggested
standard on page
178.
2
3
4
1
3
2
1
4
2
3
1
4
2
3
29
®
®
Threaded-latching models
FVG Straight plug, key (G) or keys (B), cable collet
Dimensions (mm)
Reference
~L
~M
Series
A
L
M
S1
S2
FVG
00
9
28.5
24
5
8
Note: to be ordered with nut for fitting a bend relief to obtain the rating
IP 64.
øA
S1
Model
S2
ESG Fixed socket with two round nuts, key (G)
or keys (B), long threaded shell
(back panel mounting)
L maxi
N
øA
3.2 mini 1)
e
øB
øC
M
Reference
Dimensions (mm)
Model
Series
A
B
ESG
00
9
9
C
e
E
L
M
N
2
13.7
9.5 M7x0.5 3.2 15.5
P2 Panel cut-out (page 152)
E maxi
Note: 1) minimum length of free thread to ensure mating.
FVB Straight plug, keys (B), short shell
for special cable crimping
and for fitting a bend relief
Reference
L
M
Model
Series
A
L
M
FVB
00
9
20
15.4
øA
Note: after assembly the special bend relief GMF.00.018.D● (to be ordered
separately) is to be fitted.
XRB Elbow (90°) socket for printed circuit, keys (B),
short shell with one nut, screw fixing
(back panel mounting)
2.05
5.5
= =
8
1.2
Dimensions (mm)
L
e
øA
3.2 mini 1)
Model
Series
A
e
I
L
M
P
XRB
00
10
M7x0.5
7
14
2.5
7
P2 Panel cut-out (page 152)
3
I
Dimensions (mm)
Reference
P
M
2 x M 1.4
P18 PCB drilling pattern for contact only (page 158)
Note: 1) minimum length of free thread to ensure mating.
30
www.lemo.com
®
®
Alignment Key (B series)
Alignment Key and Polarized Keying System
Nb of
keys
5
δ
γ
R
β
γ
δ
–
–
1B
0°
30°
60°
–
–
–
–
45°
–
–
–
–
–
0°
30°
60°
90°
135°
145°
155°
45°
70°
80°
110°
–
–
0°
30°
60°
90°
135°
145°
155°
45°
70°
80°
–
–
–
Series
00
0B
1B
α
β
γ
δ
–
–
–
–
–
–
–
–
–
–
–
–
G
A
B
C
D
E
F
J
K
L
M
1
2
2
2
2
2
2
2
2
2
2
Y
3
Nb of
keys
5
R
Angles
3
Angles
Y
α
0B
Nb of
keys
α
γ
β
α
γ
–
β
γ
Series
Contact type
Note
2B
3B
4B
5B
Plug
Socket
0°
30°
45°
60°
95°
120°
145°
37.5°
52.5°
70°
–
112.5°
100°
0°
30°
45°
60°
95°
120°
145°
37.5°
52.5°
70°
–
126°
102°
0°
30°
45°
60°
95°
120°
145°
37.5°
52.5°
70°
–
112.5°
147.5°
0°
30°
45°
60°
95°
120°
145°
37.5°
52.5°
70°
–
–
–
male
male
male
male
male
male
male
female
female
female
female
female
female
female
female
female
female
female
male
male
male
male
●
●
●
●
●
●
●
●
●
●
●
male
female
●1)
Series
Contact type
Angles
β
1
2
2
2
2
2
2
2
2
2
2
00
Reference
α
Front view of a socket
G
A
B
C
D
E
F
J
K
L
M
Series
Reference
δ
γ
Nb of
keys
Angles
)
β
β (5
B
α
Reference
Front view of a socket
Reference
B series connector model part numbers are composed of three letters. The LAST LETTER indicates the key position and the
contact type (male or female).
2B
3B
4B
5B
Plug
Socket
α
β
γ
δ
–
–
–
–
–
–
–
–
–
–
–
–
95°
115°
20°
30°
male
female
Note
●
Note:
FTG, FGY, ENY models are not available with all the keys. Please consult pages corresponding to these models.
For R●● models see explanation on page 21 and for S●● models see explanation on page 28.
1) only FGY and ENY models are available.
● First choice alternative
● Special order alternative
www.lemo.com
31
®
®
K Series
K series connectors have been specifically designed for outdoor applications.
They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,
free socket, fixed socket or coupler. All models of this series are watertight when mated to give a protection index of IP68
as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP66 otherwise).
K series connectors have the same insulators as the B series and have the following main features:
– security of the Push-Pull latching system
– watertight connection (IP 68/IP 66)
– multipole types 2 to 64 contacts
– solder, crimp or print (straight or elbow) contacts
– keying system («G» key standard)
– multiple key options to avoid cross mating
for connector alignment
of similar connectors
– 360° screening for full EMC shielding
– high packing density for space savings
– rugged housing for extreme working conditions.
Metal housing models (page 34)
Fixed plugs
Straight plugs
FGG
FXG
Fixed sockets
EGG
EBG
Free sockets
Free coupler
PHG
TGL
T-plug
with sockets (90°)
FAG
FGG
ENG
EDG
EEG
EHG
PHG
Elbow plug
FGG
FPG
PHG
FTG
Fixed sockets
FNG
FHG
EEG
EVG
PKG
EEG
PBG
Watertight or vacuumtight models (page 41)
Fixed sockets
HGG
32
Fixed coupler
HEG
PEG
S••
www.lemo.com
®
®
Part Numbering System
Plug
FG G . 3K . 310 . C
L
A C 65
Free socket
PH G . 3K . 310 . C
L
L
C 65 Z
Variant: (page 54)
Cable ø: (page 53)
Collet type: (page 53)
Fixed socket
EG G . 3K . 310 . C
Y M
Coupler
SL G . 3K . 310 . T
L
A PV
Model: (page 34)
Variant: (page 54)
Alignment key: (page 43)
Contact: (page 50)
Series: (page 34)
Insulator: (page 50)
Insert configuration: (page 45)
Housing: (page 50)
Part Number Example
Straight plug with cable collet:
FGG.3K.310.CLAC65 = straight plug with key (G) and cable collet, 3K series, multipole type with 10 contacts, outer shell in
chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 6.5 mm diameter cable.
Free socket:
PHG.3K.310.CLLC65Z = free socket with key (G) and cable collet, 3K series, multipole type with 10 contacts, outer shell in
chrome-plated brass, PEEK insulator, female solder contacts, C type collet for 6.5 mm diameter cable and nut for fitting a
bend relief.
Fixed socket:
EGG.3K.310.CYM = fixed socket, nut fixing, with key (G), 3K series, multipole type with 10 contacts, outer shell in chromeplated brass, PEEK extended insulator, female crimp contacts.
Fixed coupler:
SLG.3K.310.TLAPV = fixed coupler, nut fixing, keys (L) on the flange end and key (G) at the other end, 3K series, multipole
type with 10 contacts, outer shell in stainless steel, PEEK insulator, male-female contacts, vacuumtight.
Part Section Showing Internal Components
Straight plug
1 outer shell
Fixed socket
5
2
3
4
7
7
1
6
8
2
3
7
6
4
1
9
11
12
10
5
2 latch sleeve
1 outer shell
3 inner shell
2 earthing crown
4 retaining ring
3 retaining ring
5 collet nut
4 hexagonal nut
6 split insert carrier
5 insulator
7 insulator
6 female contact
8 male contact
7 o-ring
9 earthing cone
10 collet
11 gasket
12 washer
www.lemo.com
33
®
®
Metal housing models
Technical Characteristics
Electrical
Mechanical and Climatical
Characteristics
Value
Endurance
Humidity
Temperature range1)
Resistance to vibrations
Shock resistance
Salt spray corrosion test
Protection index (mated)2)
Climatical category
Standard
> 5000 cycles
IEC 60512-5 test 9a
up to 95% at 60° C
- 55° C, +200° C
10-2000 Hz, 15 g IEC 60512-4 test 6d
100 g, 6 ms
IEC 60512-4 test 6c
> 1000h
IEC 60512-6 test 11f
IP 68/IP 66
IEC 60529
50/175/21
IEC 60068-1
Characteristics
Value
at 10 MHz
at 1 GHz
Shielding
efficiency
Standard
> 95 dB
> 80 dB
IEC 60169-1-3
IEC 60169-1-3
Note:
the various tests have been carried out with FGG and EGG connector
pairs, with chrome-plated brass shell, PEEK insulator and silicone O-ring.
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 171.
1) minimum operating temperature is -20°C for sockets fitted with an FPM
(Viton®) O-ring.
2) IP68 achieved providing that the cable is perfectly circular and that
assembly process ensures a high integrity seal.
FGG Straight plug, key (G) or keys
(A to F, L and R), cable collet
Reference
~L
øA
~M
Dimensions (mm)
Model
Series
A
L
M
S2
FGG
FGG
FGG
FGG
FGG
FGG
0K
1K
2K
3K
4K
5K
11
13
16
19
25
38
34
42
52
61
71
92
23.0
28.0
36.0
41.0
50.5
67.0
8
9
12
15
19
30
S2
M1 Cable assembly (page 162)
FGG Straight plug, key (G) or keys (A to F, L and R),
cable collet and oversize cable collet 1)
Reference
~L
øB
øA
~M
S2
Dimensions (mm)
Model
Series
A
FGG
FGG
FGG
FGG
1K
2K
3K
4K
13
16
19
25
B
L
14.5 60.0
17.0 68.0
22.0 85.0
36.0 119.5
M
S1
S2
46
52
65
99
12
15
19
30
12
15
19
32
M2 Cable assembly (page 163)
Note: 1) correspond to K type of collet, the fitting of oversize collets onto this
model allows them to be fitted to the cables that can be accommodated by
the next housing size up (see page 53).
S1
FGG Straight plug, key (G) or keys (A to F, L and R),
cable collet and nut for fitting a bend relief 1)
Reference
~L
øA
~M
S2
34
Dimensions (mm)
Model
Series
A
L
M
S2
FGG
FGG
FGG
FGG
FGG
0K
1K
2K
3K
4K
11
13
16
19
25
34
42
52
60
71
23.0
28.0
36.0
40.0
50.5
7
9
12
15
19
M1
Cable assembly
(page 162)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
www.lemo.com
®
®
FNG Straight plug, key (G) or keys (A to F and L),
cable collet and lanyard release
Reference
~L
Model
Series
A
B
L
M
N
S2
FNG
FNG
2K
4K
16
25
22
32
52
71
36.0
50.5
160
230
12
19
M1 Cable assembly (page 162)
B
N
øA
~M
Dimensions (mm)
Note: cable material: stainless steel with Polyamide sheath
S2
FXG Fixed plug with round flange, key (G)
or keys (A to F, L and R) and screw fixing
Reference
~L
P
M
øB
øG
Model
Series
A
B
G
H
FXG
FXG
FXG
3K
4K
5K
38
47
65
22.5
28.5
42.5
3.4
3.4
4.4
20.6
27.0
38.0
L
M
P
61 10.0 30.0
71 11.0 32.0
100 12.5 38.5
S2
15
19
30
P6 Panel cut-out (page 153)
øA
H
Dimensions (mm)
Note: this model does not include an O-ring behind the flange, it allows the
device on which it is fitted to reach only IP50 protection index.
It does not have a cable collet.
S2
FAG Fixed plug, nut fixing, non-latching,
key (G) or keys (A to F, L and R)
L maxi
Reference
Dimensions (mm)
N
øA
M
e
øB
S3
S1
E maxi
Model
Series
A
B
e
E
L
M
N1)
FAG
FAG
FAG
FAG
FAG
1K
2K
3K
4K
5K
20
25
31
37
55
21.5
27.0
34.0
40.5
54.0
M16x1.0
M20x1.0
M24x1.0
M30x1.0
M45x1.5
2.3
4.5
4.0
4.0
4.0
22.6
33.6
34.3
35.3
43.5
16.0
18.0
22.5
23.0
28.5
22.5
28.3
33.8
36.3
42.3
S1 S3
14.5
18.5
22.5
28.5
42.5
19
24
30
36
–
P1 Panel cut-out (page 153)
Note: 1) maximum length with crimp contacts. The 1K series is delivered
with a locking washer. The 5K series is delivered with a round nut.
FPG Elbow (90°) plug, key (G)
or keys (A to F, L and R), cable collet
~L
S1
~M
Dimensions (mm)
~H
øA
Reference
S3
S2
D
www.lemo.com
Model
Series
A
D
H
L
M
S1
S2
S3
FPG
FPG
FPG
0K
1K
2K
11
13
16
7.3
8.7
10.2
25
33
40
36
42
51
25
28
35
9
11
14
8
9
12
8
10
13
M3 Cable assembly (page 162)
35
®
®
FHG Elbow (90°) plug, key (G)
or keys (A to F, L and R), cable collet
~L
S1
~H
øA
~M
S3
S2
Reference
Model
Series
FHG
FHG
3K
4K
Dimensions (mm)
A
D
21.0 11.5
27.5 15.5
H
L
M
S1
S2
S3
47
57
60
72
40.0
51.5
18
24
15
19
15
20
M3 Cable assembly (page 162)
D
EGG Fixed socket, nut fixing, key (G)
or keys (A to F, L and R)
Reference
L maxi
N
Model
Series
A
B
EGG
EGG
EGG
EGG
EGG
EGG
0K
1K
2K
3K
4K
5K
18
20
25
31
37
55
19.2
21.5
27.0
34.0
40.5
54.0
e
E
L
M
N1)
S1 S3
øA
M
e
øB
S3
Dimensions (mm)
E maxi
M14x1.0 6 21.7 4.0
M16x1.0 9 27.0 4.5
M20x1.0 9 30.7 5.0
M24x1.0 11 36.2 6.0
M30x1.0 9 40.2 6.5
M45x1.5 10 47.5 9.0
20.1
25.1
28.6
33.6
38.6
43.6
12.5
14.5
18.5
22.5
28.5
42.5
17
19
24
30
36
–
S1
P1 Panel cut-out (page 153)
Note: 1) maximum length with crimp contacts.
The 5K series is delivered with a round nut.
ENG Fixed socket, nut fixing, key (G)
or keys (A to F, L and R) and earthing tag
L maxi
N
S3
M
Dimensions (mm)
øA
e
øB
Reference
Model
Series
A
B
e
E
L
ENG
3K
31
34 M24x1.0 11.3 36.2
M
N1)
6
33.6 22.5 30
S1 S3
P1 Panel cut-out (page 153)
E maxi
S1
Note: 1) maximum length with crimp contacts.
EEG Fixed socket, nut fixing, key (G)
or keys (A to F, L and R) (back panel mounting)
L maxi
N
Dimensions (mm)
Reference
P
e
M
E maxi
øA
øB
S1
Model
Series
A
B
e
E
L
EEG
EEG
EEG
EEG
EEG
0K
1K
2K
3K
4K
18.0
20.0
25.0
30.0
41.5
18
20
25
31
37
M14x1.0
M16x1.0
M20x1.0
M24x1.0
M30x1.0
3.4
6.2
5.0
7.5
6.0
21.7
27.0
30.7
36.2
40.2
M N1)
3.5
3.5
3.5
4.5
7.0
P
20.1 7.0
25.1 10.0
28.6 10.0
33.6 12.0
38.6 13.5
S1
12.5
14.5
18.5
22.5
28.5
P1 Panel cut-out (page 153)
Note: 1) maximum length with crimp contacts.
The 3K and 4K series are delivered with a conical nut.
36
www.lemo.com
®
®
EEG Fixed socket, nut fixing, key (G) or keys
(A to F and R) with straight print contacts
for printed circuit (back panel mounting)
L
Reference
N
P
S1
øA
e
øB
M
E maxi
Dimensions (mm)
Model
Series
A
B
e
E
M
EEG
EEG
EEG
EEG
EEG
0K
1K
2K
3K
4K
18.0
20.0
25.0
30.0
41.5
18
20
25
31
37
M14x1.0
M16x1.0
M20x1.0
M24x1.0
M30x1.0
3.4
6.2
5.0
7.5
6.0
3.5
3.5
3.5
4.5
7.0
P1 Panel cut-out (page 153)
N
P
S1
17.6 7.0
23.8 10.0
25.8 10.0
31.3 12.0
34.3 13.5
12.5
14.5
18.5
22.5
28.5
P15 PCB drilling pattern (page 154)
Note: this contact type is available for E● ● socket models fitted with female
contact.
Length «L» depends on the number of contacts, see table page 156.
The 3K and 4K series are delivered with a conical nut.
L
EEG Fixed socket, nut fixing, key (G) or keys
(A to F and R) with elbow (90°) contacts
for printed circuit (back panel mounting)
N
P
S1
M
Dimensions (mm)
øA
20 mini
e
øB
Reference
E maxi
Model
Series
A
B
e
E
M
N
P
S1
EEG
EEG
EEG
EEG
0K
1K
2K
3K
18
20
25
30
18
20
25
31
M14x1.0
M16x1.0
M20x1.0
M24x1.0
3.4
6.2
5.0
7.5
3.5
3.5
3.5
4.5
19.3
24.3
26.6
31.3
7
10
10
12
12.5
14.5
18.5
22.5
P1 Panel cut-out (page 153)
2
P17 PCB drilling pattern (page 157)
Note: length «L» depends on the number of contacts, see PCB drilling
pattern page 157. The 3K series is delivered with a conical nut.
EBG Fixed socket with square flange,
key (G) or keys (A to F, L and R)
and screw fixing
L
N
A
øB
F
øG
Dimensions (mm)
Reference
M
H
Model
Series
A
B
F
G
EBG
EBG
EBG
3K
4K
5K
29
37
54
23
30
45
3
3
4
3.4
3.4
4.4
H
L
M
N1)
23 36.2 6.0 32.6
29 40.2 6.5 36.6
44 47.5 8.0 42.1
P7 Panel cut-out (page 153)
Note: 1) maximum length with crimp contacts.
EDG Fixed socket with square flange, key (G)
or keys (A to F, L and R), protruding shell
and earthing tag, screw fixing
L
N
A
M
H
Dimensions (mm)
øB
øC
Reference
øG
F
Model
Series
A
B
C
F
G
EDG
3K
29
18
23
3
3.4
H
L
M
N1)
23 36.2 22.5 32.6
P7 Panel cut-out (page 153)
Note: 1) maximum length with crimp contacts.
www.lemo.com
37
®
®
EHG Fixed socket, nut fixing, key (G)
or keys (A to F and L), protruding shell
L maxi
N
S4
M
øA
e
øB
Reference
S 3 E maxi
S1
Model
Series
EHG
EHG
EHG
0K
1K
2K
Dimensions (mm)
A
B
e
E
L
M
N1)
S1 S3 S4
18 19.2 M14x1.0 1.5 21.7 10.5 20.1 12.5 17 15
20 21.5 M16x1.0 1.5 27.0 15.5 25.1 14.5 19 17
25 27.0 M20x1.0 1.5 30.7 17.0 27.1 18.5 24 20
P1 Panel cut-out (page 153)
Note: 1) maximum length with crimp contacts.
EVG Fixed socket, nut fixing, key (G)
or keys (A to F and L) and dust cap
(spring loaded)
L maxi
N
M
Dimensions (mm)
Reference
øA
P
e
øB
S3
Model
Series
EVG
0K
A
B
e
E
L
M N1)
P
S1 S3
18 19.2 M14x1.0 6.5 24.8 6.3 23.3 23.3 12.5 17
P1 Panel cut-out (page 153)
E maxi
S1
Note: 1) maximum length with crimp contacts.
PHG Free socket, key (G) or keys (A to F, L and R),
cable collet
Reference
øA
~L
Dimensions (mm)
Model
Series
A
L
S2
PHG
PHG
PHG
PHG
PHG
PHG
0K
1K
2K
3K
4K
5K
13
15
19
23
29
42
34.0
45.0
54.0
65.0
75.5
95.0
8
9
12
15
19
32
S2
M1 Cable assembly (page 162)
PHG Free socket, key (G) or keys (A to F, L and R),
cable collet and oversize cable collet 1)
Reference
øB
øA
~L
Dimensions (mm)
Model
Series
A
B
L
S1
S2
PHG
PHG
PHG
PHG
1K
2K
3K
4K
15
19
23
29
14.5
17.0
22.0
36.0
63
70
89
124
12
15
19
30
12
15
19
32
M2 Cable assembly (page 163)
S2
38
S1
Note: 1) correspond to K type of collet, the fitting of oversize collets onto this
model allows them to be fitted to the cables that can be accommodated by
the next housing size up (see page 53).
www.lemo.com
®
®
PHG Free socket, key (G) or keys (A to F, L and R),
cable collet and nut for fitting a bend relief 1)
Reference
øA
~L
S2
Dimensions (mm)
Model
Series
A
L
S2
PHG
PHG
PHG
PHG
PHG
0K
1K
2K
3K
4K
13
15
19
23
29
34.0
45.0
54.0
64.0
75.5
7
9
12
15
19
Note: 1) to order, add a «Z» at
the end of the reference.
M1 Cable assembly (page 162)
Note: The bend relief must be ordered separately (see page 141).
PKG Fixed socket, nut fixing, key (G)
or keys (A to F, L and R), cable collet
Dimensions (mm)
Reference
~L
øA
M
e
øB
S3
Model
Series
A
B
PKG
PKG
PKG
PKG
PKG
PKG
0K
1K
2K
3K
4K
5K
18
20
25
31
37
55
19.2
21.5
27.0
34.0
40.5
54.0
e
M14x1.0 6.0
M16x1.0 9.0
M20x1.0 9.0
M24x1.0 11.5
M30x1.0 9.0
M45x1.0 15.0
E maxi
L
M
S1
S2
S3
34.0
45.0
54.0
65.0
75.5
98.0
4.0
4.5
5.0
6.0
6.5
9.0
12.5
14.5
18.5
22.5
28.5
42.5
8
9
12
15
19
30
17
19
24
30
36
–
M1 Cable assembly (page 162)
P1 Panel cut-out (page 153)
S2
E
S1
Note: the 5K series is delivered with a round nut.
PBG Fixed socket, key (G) with square flange,
cable collet and screw fixing
~L
A
øC
øB
S2
øG
Dimensions (mm)
Reference
M
H
Model
Series
A
B
C
F
G
H
L
PBG
3K
29
19
23
3
3.4
23
65 22.5 15
P7 Panel cut-out (page 153)
M
S2
M1 Cable assembly (page 162)
F
PEG Fixed socket, nut fixing, key (G)
or keys (A to F, L and R), cable collet
(back panel mounting)
Reference
~L
P
e
M
øA
øB
S1
Dimensions (mm)
Model
Series
A
B
e
E
L
M
P
PEG
PEG
PEG
PEG
0K
1K
2K
3K
18
20
25
30
18
20
25
31
M14x1.0
M16x1.0
M20x1.0
M24x1.0
5.0
6.5
4.0
7.5
34
45
54
65
3.5
3.5
3.5
4.5
8.5
10.0
7.5
12.0
P1 Panel cut-out (page 153)
S2
www.lemo.com
E maxi
S1 S2
12.5
14.5
18.5
22.5
8
9
12
15
M1 Cable assembly (page 162)
Note: the 3K series is delivered with a conical nut.
39
®
®
TGL Free coupler, key (G) on one side
and keys (L) on the other
Dim. (mm)
Reference
L
TGL.3K.3●●.CLLP
A
L
24
64.2
øA
Note: this model is only available in type 308, 310, 316, 318, 320, 324
and 330.
FTG T-plug, key (G) with sockets (90°), key (G)
Dimensions (mm)
L
Reference
M
H
L
M
16
16
19
19
48
48
77
77
60
60
øA
B
H
øB
FTG.2K.304.CLF
FTG.2K.308.CLF
A
40
www.lemo.com
®
®
Watertight or vacuumtight models
These socket and coupler models allow the device on which they are fitted to reach a protection index of IP68 as per IEC
60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory
equipment, aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at
the end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance
Humidity
Temperature range (0K-1K)
Temperature range (2K to 5K)
Salt spray corrosion test
Climatical category
Leakage rate (He)1)
Note:
1)
Value
Standard
Characteristics
> 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 20° C/+100° C
- 20° C/+80° C
> 1000h
IEC 60512-6 test 11f
20/80/21
IEC 60068-1
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
only for vacuumtight models.
Value
0K
1K
2K
3K
4K
5K
Maximum operating
pressure2)
Standard
60 bar
60 bar
40 bar
30 bar
15 bar
5 bar
IEC 60512-7 test 14d
Note: 2) this value corresponds to the maximum allowed pressure difference for the assembled socket.
HGG Fixed socket, nut fixing, key (G) or keys
(A to F and L), watertight or vacuumtight
L maxi
Reference
Dimensions (mm)
øA
M
e
øB
S3
E maxi
S1
Model
Series
A
B
e
E
L
M
S1
S3
HGG
HGG
HGG
HGG
HGG
HGG
0K
1K
2K
3K
4K
5K
18
20
25
31
37
55
19.2
21.5
27.0
34.0
40.5
54.0
M14x1.0
M16x1.0
M20x1.0
M24x1.0
M30x1.0
M45x1.5
5.5
9.0
13.0
16.0
14.0
10.0
23.0
30.0
33.7
41.7
49.2
55.7
4.0
4.5
5.0
6.0
6.5
9.0
12.5
14.5
18.5
22.5
28.5
42.5
17
19
24
30
36
–
P1 Panel cut-out (page 153)
Note: the 5K series is delivered with a round nut.
HEG Fixed socket, nut fixing, key (G) or keys
(A to F and L), watertight or vacuumtight
(back panel mounting)
L maxi
P
E maxi
www.lemo.com
M
Dimensions (mm)
øA
Reference
e
øB
S1
Model
Series
HEG
HEG
HEG
0K
1K
2K
A
B
e
E
L
M
P
S1
18 18 M14x1.0 3.4 23.0 3.5 7 12.5
20 20 M16x1.0 6.2 30.0 3.5 10 14.5
25 25 M20x1.0 5.0 33.7 3.5 10 18.5
P1 Panel cut-out (page 153)
41
®
®
S ● ● Fixed coupler, nut fixing, key (G) or keys (L) at the flange end, and key (G) or keys (C or L)
at the other end, watertight or vacuumtight
L
M
øA
S1
e
øB
S3
E maxi
G
SGL
L
L
SLG
G
Reference
Model
SLC
L
C
Example
SGL
SLG
SLG
SLG
SLC
SLG
SLC
Series
Contacts
Type
Dimensions (mm)
A
B
e
E
L
M
S1
S3
3K
female – male
male – female
male – female
4K
male – female
37
40.5 M30x1.0
48
74.0 6.5 28.5 36
5K
male – female
55
54.0 M45x1.5
58
88.0 9.0 42.5
2K
25
27.0 M20x1.0
25
52.4 5.0 18.5 24
31
34.0 M24x1.0
33
64.0 6.0 22.5 30
–
SGL
Plug with key G
Plug with key L
Alignment key see page 43.
42
P1 Panel cut-out (page 153)
Note: for this fixed coupler, the first contact type mentioned is always the one at the flange end.
On request, these couplers can be produced in other series, with other keys.
The 5K series is delivered with a round nut.
www.lemo.com
®
®
Alignment Key (K series)
Alignment Key and Polarized Keying System
β
δ
γ
α
Front view of a socket
1
2
2
2
2
2
2
2
Nb of
keys
5
Angles
G
A
B
C
D
E
F
L
α
γ
β
γ
Series
Contact type
Note
0K
1K
2K
3K
4K
5K
Plug
Socket
0°
30°
45°
60°
95°
120°
145°
75°
0°
30°
45°
60°
95°
120°
145°
75°
0°
30°
45°
60°
95°
120°
145°
75°
0°
30°
45°
60°
95°
120°
145°
75°
0°
30°
45°
60°
95°
120°
145°
75°
0°
30°
45°
60°
95°
120°
145°
75°
male
male
male
male
male
male
male
female
female
female
female
female
female
female
female
male
Series
●
●
●
●
●
●
●
●
Contact type
0K
1K
2K
3K
4K
5K
Plug
Socket
α
β
γ
δ
–
–
–
–
–
–
–
–
–
–
–
–
95°
115°
35°
25°
–
–
–
–
–
–
–
–
male
female
Note
β
Nb of
keys
Angles
α
Reference
Front view of a socket
Reference
K series connector model part numbers are composed of three letters. The LAST LETTER indicates the key position and the
contact type (male or female).
δ
γ
R
●
Note: S●● and TGL models are not available with all the keys. For S●● models see explanation on page 42.
Please consult the pages corresponding to these models.
● First choice alternative
● Special order alternative
www.lemo.com
43
®
44
®
www.lemo.com
®
®
Insert configuration (B and K series)
Multipole
Female solder contacts
● First choice alternative
● Special order alternative
www.lemo.com
Note:
1)
2)
3)
4)
5)
302
2
0.5
●
●
●
●
1.00
0.95 1.15 1.20
5.0
303
3
0.5
●
●
●
●
0.80
0.95 1.35 1.10
3.0
304
4
0.5
●
●
●
●
0.80
0.65 1.05 1.05
2.0
305
5
0.35
●
–
–
–
0.70
1.00
1.7
302
2
0.9
●
●
●
●
1.00
1.05 1.45 1.20 10.02)
303
3
0.9
●
●
●
●
1.20
0.90 1.70 1.60
8.02)
304
4
0.7
●
●
●
●
0.85
0.70 1.35 1.10
7.02)
305
5
0.7
●
●
●
●
1.00
0.70 1.25 1.20
6.52)
306
6
0.5
●
● 4)
●
●
0.85
0.65 1.40 1.20
2.5
307
7
0.5
●
● 4)
●
●
0.80
0.70 1.40 1.20
2.5
309
9
0.5
●
● 4)
●
●
0.60
0.50 1.00 0.85
2.0
312
12
0.35
●
–
–
–
0.80
1.00
1.5
302
2
1.3
●
●
●
●
1.50
1.35 1.70 1.45 15.03)
303
3
1.3
●
●
●
●
1.30
1.55 1.60 1.85
304
4
0.9
●
●
●
●
1.35
1.45 1.70 1.80 10.02)
305
5
0.9
●
●
●
●
1.25
1.15 1.30 1.55
9.02)
306
6
0.7
●
●
●
●
1.05
1.20 1.35 1.45
7.02)
307
7
0.7
●
●
●
●
0.95
1.05 1.45 1.45
7.02)
308
8
0.7
●
●
●
●
0.95
1.15 1.30 1.30
5.0
310
10
0.5
●
● 4)
●
●
0.90
1.50 1.20 1.80
2.5
314
14
0.5
●
● 4)
●
●
0.80
1.20 0.95 1.60
2.0
316
16
0.5
●
● 4)
●
●
0.80
1.25 0.95 1.60
1.5
Test voltage (kV rms)1)
Contact-contact
Rated current (A)1)
1B
1K
Test voltage (kV rms)1) 5)
Contact-shell
0B
0K
Test voltage (kV rms)1) 5)
Contact-shell
00
Test voltage (kV rms)1)
Contact-contact
Female crimp contacts
Print (elbow)
2
Print (straight)
3
Crimp
3
Solder
2
ø A (mm)
1
Number of contacts
4
Crimp
contact
Reference
4
øA
1
Male crimp contacts
Solder
contact
Contact type
øA
Male solder contacts
–
–
–
–
12.0
see calculation method, caution and suggested standard on page 178.
rated current = 6A for socket with elbow (90°) contact for printed circuit.
rated current = 12A for socket with elbow (90°) contact for printed circuit.
available only for connectors fitted with male contacts.
test voltage (kV) contact-shell is slightly lower for K series (values here are for B series).
45
®
®
Multipole
Female solder contacts
● First choice alternative
● Special order alternative
46
Note:
1)
2)
3)
4)
Print (elbow)
Test voltage (kV rms)1)
Contact-contact
Test voltage (kV rms)1) 4)
Contact-shell
Test voltage (kV rms)1)
Contact-contact
Test voltage (kV rms)1) 4)
Contact-shell
302
2
2.0
●
●
●
●
2.10 1.75
2.85
2.70 25.03)
303
3
1.6
●
●
●
●
2.40 1.85
1.90
1.90 17.03)
304
4
1.3
●
●
●
●
1.85 1.85
2.20
2.20 15.03)
305
5
1.3
●
●
●
●
1.75 1.60
2.15
2.15 14.03)
306
6
1.3
●
●
●
●
1.35 1.45
2.00
2.35 12.0
307
7
1.3
●
●
●
●
1.75 1.60
1.95
2.15 11.0
308
8
0.9
●
●
●
●
1.50 1.25
1.95
1.95 10.02)
310
10
0.9
●
●
●
●
1.45 1.30
1.80
2.10 8.02)
312
12
0.7
●
●
●
●
1.25 1.35
1.65
2.00 7.02)
314
14
0.7
●
●
●
●
1.15 1.35
1.55
1.55 6.52)
316
16
0.7
●
●
●
●
0.95 1.25
1.55
1.75
6.0
318
18
0.7
●
●
●
●
0.85 1.20
1.45
2.10
5.5
319
19
0.7
●
●
●
●
0.95 1.25
1.55
1.65
5.0
326
26
0.5
●
–
●
●
0.95 1.30
1.20
1.80
2.0
332
32
0.5
●
–
●
●
0.80
0.95
1.60
1.5
1.2
Rated current (A)1)
Print (straight)
2B
2K
Crimp
Female crimp contacts
Solder
2
ø A (mm)
1
3
Number of contacts
4
3
Crimp
contact
Reference
4
2
øA
1
Male crimp contacts
Solder
contact
Contact type
øA
Male solder contacts
see calculation method, caution and suggested standard on page 178.
rated current = 6A for socket with elbow (90°) contact for printed circuit.
rated current = 12A for socket with elbow (90°) contact for printed circuit.
test voltage (kV) contact-shell is slightly lower for K series (values here are for B series).
www.lemo.com
®
®
Multipole
● First choice alternative
● Special order alternative
www.lemo.com
Note:
1)
2)
3)
302
2
3.0
●
●
●
–
2.10 1.55
2.30 1.80
35.0
303
3
2.0
●
●
●
●
1.90 1.50
3.20 2.65
25.0
304
4
2.0
●
●
●
●
1.45 1.25
2.50 2.20
19.0
305
5
1.6
●
●
●
●
1.90 1.25
2.40 1.75
19.0
306
6
1.6
●
●
●
●
1.60 1.15
1.90 1.80
17.0
307
7
1.6
●
●
●
●
1.70 1.25
2.00 2.05
15.0
308
8
1.3
●
●
●
●
1.65 1.15
1.85 1.75
13.0
309
8
1
1.3
2.0
●
●
●
–
1.35 1.05
1.35 1.05
1.10 1.05
1.10 1.05
6.0
15.0
310
10
1.3
●
●
●
●
1.25 0.90
1.50 1.80
12.0
312
12
0.9
●
●
●
●
1.45 1.00
1.65 1.85
9.0
314
14
0.9
●
●
●
●
1.20 1.20
1.80 1.65
9.02)
316
16
0.9
●
●
●
●
1.20 0.85
1.80 1.50
8.0
318
18
0.9
●
●
●
●
1.20 1.05
1.85 1.60
7.0
320
20
0.7
●
●
●
●
1.00 0.90
1.35 1.55
6.0
322
22
0.7
●
●
●
●
1.00 0.90
1.70 1.45
5.5
324
24
0.7
●
●
●
●
0.95 0.80
1.35 1.35
4.0
326
26
0.7
●
●
●
●
0.95 0.70
1.50 1.30
4.0
330
30
0.7
●
●
●
●
0.80 0.70
1.35 1.20
3.5
Rated current (A)1)
Test voltage (kV rms)1)
Contact-contact
Test voltage (kV rms)1) 3)
Contact-shell
Print (elbow)
Test voltage (kV rms)1)
Contact-contact
Print (straight)
3B
3K
Crimp
Female crimp contacts
Solder
2
ø A (mm)
1
3
Number of contacts
4
3
Crimp
contact
Reference
4
2
øA
1
Male crimp contacts
Solder
contact
Contact type
Test voltage (kV rms)1) 3)
Contact-shell
Female solder contacts
øA
Male solder contacts
see calculation method, caution and suggested standard on page 178.
rated current = 6A for socket with elbow (90°) contact for printed circuit.
test voltage (kV) contact-shell is slightly lower for K series (values here are for B series).
47
®
®
Multipole
Female solder contacts
Contact type
● First choice alternative
● Special order alternative
48
Note:
1)
2)
Test voltage (kV rms)1) 2)
Contact-shell
Test voltage (kV rms)1)
Contact-contact
Test voltage (kV rms)1) 2)
Contact-shell
Rated current (A)1)
4B
4K
Test voltage (kV rms)1)
Contact-contact
Female crimp contacts
Print (straight)
Male crimp contacts
Crimp
2
Solder
1
3
ø A (mm)
4
3
Crimp
contact
Number of contacts
4
2
øA
1
Solder
contact
Reference
øA
Male solder contacts
304
4
3.0
●
●
●
2.10 1.50
1.80
1.20
30.0
306
6
2.0
●
●
●
2.00 1.75
2.75
2.40
24.0
307
7
2.0
●
●
●
2.00 1.80
1.50
1.35
20.0
310
10
1.6
●
●
●
1.85 1.30
1.90
1.95
17.0
312
12
1.3
●
●
●
1.45 1.60
1.90
1.85
12.0
316
16
0.9
●
●
●
1.35 1.50
2.30
2.10
10.0
320
20
0.9
●
●
●
1.35 1.00
1.05
0.95
8.0
324
24
0.9
●
●
●
1.20 1.45
1.80
2.05
7.0
330
30
0.9
●
●
●
0.95 0.85
1.75
1.45
5.0
340
40
0.7
●
●
●
0.90 0.90
1.30
1.30
2.0
348
48
0.7
●
●
●
0.70 0.70
1.00
1.00
1.5
see calculation method, caution and suggested standard on page 178.
test voltage (kV) contact-shell is slightly lower for K series (values here are for B series).
www.lemo.com
®
®
Multipole
Female solder contacts
Contact type
● First choice alternative
● Special order alternative
www.lemo.com
Note:
1)
2)
Test voltage (kV rms)1) 2)
Contact-shell
Test voltage (kV rms)1)
Contact-contact
Test voltage (kV rms)1) 2)
Contact-shell
Rated current (A)1)
5B
5K
Test voltage (kV rms)1)
Contact-contact
Female crimp contacts
Print (straight)
Male crimp contacts
Crimp
2
Solder
1
3
ø A (mm)
4
3
Crimp
contact
Number of contacts
4
2
øA
1
Solder
contact
Reference
øA
Male solder contacts
302
2
6.0
●
–
–
3.60
2.95
–
–
50.0
304
4
4.0
●
●
●
2.95
2.65
3.20
2.40
35.0
310
10
3.0
●
●
●
2.35
2.30
2.65
3.20
20.0
314
14
2.0
●
●
●
2.10
2.00
2.85
2.95
18.0
316
16
2.0
●
●
●
1.85
1.95
2.45
3.05
12.0
320
20
1.6
●
●
●
1.90
1.70
2.20
2.40
10.0
330
30
1.3
●
●
●
1.45
1.60
2.05
2.45
8.0
340
40
1.3
●
●
●
1.30
1.45
2.00
1.95
7.0
348
48
1.3
●
●
●
1.20
1.10
2.00
1.55
6.0
350
50
0.9
●
●
●
1.30
1.60
1.20
1.45
6.0
354
54
0.9
●
●
●
1.15
1.55
2.00
2.10
5.0
364
64
0.9
●
●
●
1.30
1.55
1.35
1.85
3.0
see calculation method, caution and suggested standard on page 178.
test voltage (kV) contact-shell is slightly lower for K series (values here are for B series).
49
®
®
Housings (B and K series)
Ref.
Outer shell and collet nut
Material
C
N
K
S
T
U
L
X
G
P
R
H
P
Latch sleeve + earthing crown
Surf. treatment
Brass
chrome
Brass
nickel
Brass
black chrome
Stainless steel
–
Stainless steel
–
Stainless steel
–
Aluminium alloy
anodized
Aluminium alloy nickel anthracite
PEEK (natural)
–
PSU
–
PPSU
–
PPS/brass
–/nickel
PA.6
–
Other metallic components
Material
Surf. treatment
Material
Surf. treatment
brass/bronze
brass/bronze
brass/bronze
brass/bronze
stainless steel
stainless steel
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass/bronze
nickel 2)
nickel 2)
nickel 2)
nickel 2)
–
–
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
brass
brass
brass
brass
brass
stainless steel
brass
brass
brass
brass
brass
brass
brass
nickel
nickel
nickel
nickel
nickel
–
nickel
nickel
nickel
nickel
nickel
nickel
nickel
Remarks
Note
Only for FGG and ENG (B series)
Only for FGY and ENY (B series) 1)
Only for FGY and ENY (B series) 1)
Only for elbow sockets (B series)
Only for CRF and CRG bridge plug 1)
●
●
●
●
●
●
●
●
●
●
●
●
●
1)
Note: detailed characteristics of these materials and treatments are presented on page 171.
1) see «variant» for the colour.
2) in the K series, the latch sleeve is chrome-plated.
● First choice alternative
● Special order alternative
Insulators (B and K series)
Ref.
Y
L
Material
PEEK
PEEK
Contact type
Crimp
Solder or print
Remarks
extended design, with contacts that recess into insulator
Note
●
●
Note: detailed characteristics of these materials are presented on page 175.
Contacts (B and K series)
Soldering characteristics
Crimping characteristics
– no need to order specific tools, a simple soldering iron is
sufficient
– ideal for very small and fragile conductors
– contacts with solder cups to allow the solder to flow
–
–
–
–
practical, quick contact fixing outside the insulator
possible use at high temperature
need to order specific tools
no risk of heating the insulator during the conductorcontact fixing
– high tensile strength
– totally lead-free solution
Note: see page 176 for more information.
50
www.lemo.com
®
®
Contacts reference for plugs, free or fixed sockets
Reference
Contact type
fig. 1
Crimp
øA
øC
øA
øC
fig. 2
øC
øA
øC
øA
Fr 1)
(N) Notes
øC
Form
(mm) per fig.
A
L
0.35
0.52)
0.5
0.7
0.9
1.3
1.6
2.0
3.0
4.0
6.0
0.40
0.402)
0.456)
0.80
0.805)
1.00
1.40
1.80
2.70
3.70
5.20
–
–
–
–
–
–
–
–
–
–
–
28
28
28
22
225)
20
16
14
10
10
–
C
C
B
C
B
G
C
B
G
C
B
C
B
C
C
M
M
P
M
P
U
M
P
U
M
P
M
P
M
M
0.54)
0.45
0.80
0.45
1.10
0.80
0.45
1.40
1.10
0.80
1.90
1.40
2.40
1.90
2.90
4.00
1
1
2
1
2
2
1
2
2
1
2
1
2
1
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
D
N
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 156.
●
V
V
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 157.
●
øC
øC
Conductor
Stranded
AWG
Section (mm2)
øA
(mm)
Solder
øA
Solid
AWG Section
max.
max.
(mm2)
Female
Male
øA
Contact
0.7
0.9
1.3
1.6
2.0
3.0
4.0
0.09
0.09
0.09
0.34
0.345)
0.50
1.00
1.50
4.00
6.00
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
min.
max.
–
–
–
–
–
–
–
–
–
–
–
30
30
28
223)
223)5)
203)
18
16
12
10
8
32
26
32
24
26
32
20
24
26
18
22
16
18
14
12
28
223)
28
20
223)
28
18
20
223)
143)
18
123)
14
103)
10
min.
max.
–
–
–
–
–
–
–
–
–
–
–
0.05
0.05
0.09
0.34
0.345)
0.50
1.00
1.50
4.00
6.00
10.00
–
–
–
–
–
–
–
–
–
–
–
0.035
0.140
0.035
0.250
0.140
0.035
0.500
0.250
0.140
1.000
0.340
1.500
1.000
2.500
4.000
0.09
0.34
0.09
0.50
0.34
0.09
1.00
0.50
0.34
1.50
1.00
2.50
1.50
4.00
6.00
12
22
30
40
50
65
75
90
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Print
L
øC
øA
øA
øC
L
Print (elbow)
L
øA
øC
Note:
1)
2)
3)
4)
5)
6)
contact retention force in the insulator (according to IEC 60512-8 test 15 a).
for 00 multipole series.
for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter.
Make sure that the maximum conductor diameter is smaller than ø C.
available only for 00 multipole series and connectors fitted with male contacts of the 0B and 1B series.
for 0B.302/0B.303 and 0K.302/0K.303 ø C = 1.0 mm, AWG max 20, section max (mm2) 0.50.
for 00 and 1B/1K series, according to manufacturing and plating tolerance ø C min = 0.43 mm.
● First choice alternative
● Special order alternative
Contacts reference for couplers R●●, S●● and TGL
Contact type
Ref.
A
L
M
Male - Female
Female - Male
Female - Female
www.lemo.com
Remarks
contact configuration is explained on page 21, 28, 42
contact configuration is explained on page 21, 28, 42
contact configuration is explained on page 21
51
®
®
Collets (B and K series)
D and M type collets for B series
øB
øA
D type
Reference
øA
øB
M type
Collet ø
Cable ø
Reference
Collet ø
Cable ø
Notes
Type Code
00
0B
1B
2B
øA
øB
max.
Notes
min.
D
D
D
22
27
35
2.2
2.7
3.5
–
–
2.8
2.2
2.7
3.5
1.4
> 2.2
> 2.7
D
D
D
D
D
21
31
42
52
56
2.1
3.1
4.2
5.2
5.6
–
–
–
4.7
4.7
2.2
3.2
4.2
5.2
5.6
1.4
> 2.2
> 3.2
> 4.2
> 5.2
M
M
D
D
D
D
D
27
31
42
52
62
72
76
2.7
3.1
4.2
5.2
6.2
7.2
7.6
–
–
–
–
–
6.2
6.9
2.7
3.1
4.2
5.2
6.2
7.2
7.6
> 2.2
> 2.7
3.1
> 4.2
> 5.2
> 6.2
> 7.2
M
M
D
D
D
D
D
D
D
21
31
42
52
62
72
82
92
99
2.1
3.1
4.2
5.2
6.2
7.2
8.2
9.2
9.9
–
–
–
–
–
–
–
8.6
8.6
2.2
3.2
4.2
5.2
6.2
7.2
8.2
9.2
9.9
1.4
> 2.2
> 3.2
> 4.2
> 5.2
> 6.2
> 7.2
> 8.2
> 9.2
Type Code
3B
1)
4B
1)
5B
øA
øB
max.
min.
M
D
D
D
D
D
D
52
62
72
92
10
11
12
5.2
6.2
7.2
9.2
10.2
11.0
12.0
–
–
–
–
–
–
10.2
5.2
6.2
7.7
9.2
10.0
11.0
11.9
> 4.2
4.9
> 6.2
> 7.7
> 9.2
> 10.1
10.8
M
M
M
D
D
D
D
D
62
72
92
10
12
13
15
16
6.2
7.2
9.2
10.8
12.3
13.8
15.3
16.3
–
–
8.6
–
–
12.5
12.5
12.5
6.2
7.7
9.2
10.5
12.0
13.5
15.0
16.0
4.9
> 6.2
> 7.7
9.1
10.6
12.1
13.6
15.1
D
D
D
D
D
D
D
D
11
13
15
17
19
21
23
25
11.8
13.8
15.8
17.8
19.8
21.8
23.8
25.3
–
–
–
–
–
–
21.8
21.8
11.5
13.5
15.5
17.5
19.5
21.5
23.5
25.0
9.6
11.6
13.6
15.6
17.6
19.6
21.6
23.6
1)
1)
1)
1)
1)
1)
1)
1)
Note: all dimensions are in millimetres.
1) these collets cannot be used for connector models with nut for fitting a bend relief.
52
www.lemo.com
®
®
C and K type collets for K series
øB
K type
oversize
cable collet
Reference
Type Code
0K
1K
2K
3K
øA
øA
øB
C type
Collet ø
Cable ø
Reference
øA
øB
max.
min.
C
C
C
C
C
C
C
C
C
10
15
20
25
30
35
40
45
50
1.6
1.6
2.1
3.1
3.1
4.2
4.2
5.2
5.2
–
–
–
–
–
4.2
4.2
5.2
5.2
1.2
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
1.0
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
1.6
2.2
3.2
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
7.2
8.2
8.2
9.2
–
–
–
–
–
–
–
–
6.2
6.2
6.7
–
8.2
8.2
8.6
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
10
11
2.2
2.2
3.2
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
7.2
8.2
8.2
9.2
9.2
10.2
10.2
11.2
–
–
–
–
–
–
–
–
–
–
–
–
8.2
8.2
8.6
–
10.2
10.2
10.6
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
8.6
9.1
9.6
10.1
C
C
C
C
C
C
C
C
30
35
40
45
50
55
60
65
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
–
–
–
–
–
–
–
–
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
Type Code
3K
4K
5K
Collet ø
Cable ø
øA
øB
max.
min.
C
C
C
C
C
C
C
C
K
K
K
K
K
70
75
80
85
90
95
10
11
11
12
13
14
15
7.2
8.2
8.2
9.2
9.2
10.2
10.2
11.2
12.3
13.8
13.8
15.3
15.3
–
–
–
–
–
10.2
10.2
10.6
–
13.8
13.8
15.3
15.3
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
12.0
12.8
13.5
14.0
15.0
6.6
7.1
7.6
8.1
8.6
9.1
9.6
10.1
10.6
12.1
12.9
13.6
14.1
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
50
55
60
65
70
75
80
85
90
95
10
12
13
15
16
17
18
19
20
21
22
23
6.3
6.3
6.3
7.3
7.3
8.3
8.3
9.3
9.3
10.8
10.8
12.3
13.8
15.3
17.8
17.8
19.8
19.8
21.8
21.8
23.8
23.8
–
–
–
–
–
–
–
–
–
–
–
–
13.8
15.3
–
–
–
–
–
–
23.8
23.8
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.5
12.0
13.5
15.0
16.5
17.5
18.5
19.5
20.5
21.5
22.5
23.5
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
8.6
9.1
9.6
10.6
12.1
13.5
15.6
16.6
17.6
18.6
19.6
20.6
21.6
22.6
C
C
C
C
C
C
C
C
C
C
C
C
C
C
10
11
12
13
14
15
16
17
18
19
20
21
22
23
11.8
11.8
13.8
13.8
15.8
15.8
17.8
17.8
19.8
19.8
21.8
21.8
23.8
23.8
–
–
–
–
–
–
–
–
–
–
–
–
23.8
23.8
10.5
11.5
12.5
13.5
14.5
15.5
16.5
17.5
18.5
19.5
20.5
21.5
22.5
23.5
9.6
10.6
11.6
12.6
13.6
14.6
15.6
16.6
17.6
18.6
19.6
20.6
21.6
22.6
Note: all dimensions are in millimetres.
www.lemo.com
53
®
®
Variant (B and K series)
Bend relief for B series models with collet
Bend relief for K series models with collet
Need to be ordered
Type
Code
Need to be ordered
separately
(see pages 141 and 142)
Collet
Ref.
Ref.
Collet
Need to be ordered
Type
Code
Need to be ordered
separately
(see pages 141 and 142)
00
Z
D
22 to 35
GMA.00.●●●.●●
GMB.00.●●●.●●
0K
Z
C
10 to 50
GMA.0B.●●●.●●
0B
Z
D
21 to 52
GMA.0B.●●●.●●
1K
Z
C
K
15 to 65
70 to 85
GMA.1B.●●●.●●
GMA.2B.●●●.●●
1B
Z
M
D
27 and 31
42 to 72
GMA.1B.●●●.●●
GMA.1B.●●●.●●
2K
Z
C
K
15 to 85
90 to 10
GMA.2B.●●●.●●
GMA.3B.●●●.●●
2B
Z
M
D
21 and 31
42 to 92
GMA.0B.●●●.●●
GMA.2B.●●●.●●
3K
Z
C
K
30 to 10
11 to 15
GMA.3B.●●●.●●
GMA.4B.●●●.●●
3B
Z
M
D
52
62 to 10
GMA.1B.●●●.●●
GMA.3B.●●●.●●
4K
Z
C
50 to 15
GMA.4B.●●●.●●
Z
M
M
D
62 and 72
92
10 to 15
GMA.2B.●●●.●●
GMA.4B.●●●.●●
GMA.4B.●●●.●●
Z
D
11 to 15
GMA.4B.●●●.●●
4B
5B
Note: All dimensions are in millimetres.
Colour of the bridge plug shells and connectors shell made of plastic material and aluminium alloys
Bridge plug and plastic shell
Reference
Colour
A
B
G
J
M
N
R
S
T
V
L
X
F
blue
white
grey
yellow
brown
black
red
orange
natural
green
black
natural
cream
PSU
PPSU
●
●
PA.6
Anodized colour
●
●
●
●
●
●
●
●
●
●
B
K
54
Anodized colour
for bend relief collet nut
●
●
●
●
●
●
●
●
Watertight and vacumtight socket and coupler
models (B and K series)
Model
Aluminium alloys
Reference
Watertight
Vacuumtight
YH●, HG●,
HN●, HH●,
HC●, HE●,
HM●, S●●
P
HG●, HE●,
S●●
P
Note: other anodizing colours are available
for connectors with collet nut for bend relief.
Please consult us.
O-ring and gasket material (K series)
Standard connectors are delivered with silicone o-ring and
gaskets. The vacuumtight models, identified with the letter
«PV», are delivered with Viton® gaskets. Other gaskets
material can be delivered upon special request.
PV
PV
O-ring material
Reference
FPM (Viton®)
EPDM
FPM (Viton®) and collet nut for bend relief
H
E
D
www.lemo.com
L SERIES (watertight keyed)
E SERIES (watertight)
S SERIES
®
®
S Series
S series connectors have main features as follows:
– security of the Push-Pull self-latching system
– unipole types transmitting current up to 230 A
and multipole types with up to 106 contacts
– 360° screening for full EMC shielding.
– solder or print contacts (straight or elbow)
– polarisation by stepped insert (half-moon)
fitted with male and female contacts
Metal housing models (page 58)
Fixed plug
Straight plugs
Fixed sockets
Free sockets
FAA
FFA, FFP
ERA
EEP
PCA, PCP
FFA
ERN
ERD
PCA
FFA, FFP
ERC
FFB
ERS
Elbow plugs
FLM
FLA
PCA, PCP
ECP
PZP
ECP
Fixed sockets
FFE
EHP
ECP
FLS
PSA, PSP
FFL
Free coupler
EBD
PSS
RMA
FFF
T-plug
EBS
Fixed coupler
FFS
FTA
EBC
RAD
FZP
Elbow socket models (page 68)
Elbow sockets
EXP
EPL
Plastic housing models (page 70)
Straight plugs
Watertight or vacuumtight models (page 72)
Fixed socket
Fixed sockets
Fixed coupler
FFA, FFP
HGP
FFP
EWB
ERN
SWH
FFL
HCP
56
HGW
www.lemo.com
®
®
Part Numbering System
Plug
FFA . 1S . 304 . C
L
A C 32
Free socket
PCA . 1S . 304 . C
L
L
C 32 Z
Variant: (page 107)
Cable ø: (page 102)
Collet type: (page 102)
Fixed socket
ERA . 1S . 304 . C
L
L
Coupler
RAD . 1S . 304 . C
L
L
Variant: (page 107)
Model: (page 58)
Contact: (page 99)
Series: (page 58)
Insulator: (page 99)
Insert configuration: (page 91)
Housing: (page 99)
Part Number Example
Straight plug with cable collet:
FFA.1S.304.CLAC32 = straight plug with cable collet, 1S series, multipole type with 4 contacts, outer shell in chromeplated brass, PEEK insulator, 2 male and 2 female solder contacts, C type collet for a 3.2 mm diameter cable.
Free socket:
PCA.1S.304.CLLC32Z = free socket, with cable collet, 1S series, multipole type with 4 contacts, outer shell in chromeplated brass, PEEK insulator, 2 female and 2 male solder contacts, C type collet for a 3.2 mm diameter cable and nut for
fitting a bend relief.
Fixed socket:
ERA.1S.304.CLL = fixed socket, nut fixing, 1S series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK
insulator, 2 female and 2 male solder contacts.
Fixed coupler:
RAD.1S.304.CLL = straight coupler, nut fixing, 1S series, multipole type with 4 contacts, outer shell in chrome-plated
brass, PEEK insulator, 2 female and 2 male contacts each end.
Part Section Showing Internal Components
Straight plug
Fixed socket
6
1
2
3
4
5
6
7
8
www.lemo.com
outer shell
earthing crown
retaining ring
hexagonal nut
locking washer
insulator
male contact
female contact
2
3
1
4
5
8
7
1
7
6
5
4
2
8
3
1 outer shell
2 latch sleeve
3 collet nut
4 centre-piece
5 insulator
6 male contact
7 female contact
8 collet
57
®
®
Metal housing models
Technical Characteristics
Electrical
Mechanical and Climatical
Characteristics
Value
Endurance
Humidity
Temperature range
Resistance to vibrations
Shock resistance
Salt spray corrosion test
Protection index (mated)
Climatical category
Standard
> 5000 cycles
IEC 60512-5 test 9a
up to 95% at 60° C
- 55° C, +250° C
10-2000 Hz, 15 g IEC 60512-4 test 6d
100 g, 6 ms
IEC 60512-4 test 6c
> 1000h
IEC 60512-6 test 11f
IP 50
IEC 60529
55/175/21
IEC 60068-1
Characteristics
Value
at 10 MHz
at 1 GHz
Shielding
efficiency
Standard
> 75 dB
> 40 dB
IEC 60169-1-3
IEC 60169-1-3
Note:
The various tests have been carried out with FFA and ERA connector
pairs, with chrome-plated brass shell and PEEK insulator.
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 171.
FFA Straight plug, cable collet
Reference
~L
øA
~M
S2
Model
Series
FFA
FFA
FFA
FFA
FFA
FFA
FFA
FFA
00
0S
1S
2S
3S
4S
5S
6S
Dimensions (mm)
A
L
M
6.4 26.0 18.0
9.0 34.5 24.5
12.0 42.5 31.5
14.8 52.0 40.0
17.8 61.0 46.0
24.8 77.0 59.0
35.0 103.0 78.0
46.0 106.0 81.0
S2
4.5
6.5
8.5
11.0
14.0
19.0
29.0
38.0
M1
Cable assembly
(pages 163 to 165)
FFA Straight plug with oversize cable collet 1)
Reference
~L
øA
øB
~M
Dimensions (mm)
Model
Series
A
FFA
FFA
FFA
FFA
FFA
FFA
FFA
00
0S
1S
2S
3S
4S
5S
6.4
9.0
12.0
14.8
17.8
24.8
35.0
B
L
M
8.0 34.0 26.0
10.0 45.5 35.5
13.0 57.0 46.0
18.0 67.0 55.0
21.0 85.0 70.0
31.8 107.0 89.0
41.8 138.0 113.0
S1
S2
7.0
9.0
12.0
14.0
19.0
28.5
37.5
6.5
8.5
11.0
14.0
19.0
29.0
38.0
M2 Cable assembly (pages 164 and 166)
S2
S1
Note: 1) correspond to K type of collet, the fitting of oversize collets onto this
model allows them to be fitted to the cables that can be accommodated by
the next housing size up (see page 102).
FFA Straight plug, cable collet
and nut for fitting a bend relief 1)
Reference
~L
øA
~M
S2
58
Dimensions (mm)
Model
Series
A
L
M
S2
FFA
FFA
FFA
FFA
FFA
FFA
00
0S
1S
2S
3S
4S
6.4
9.0
12.0
14.8
17.8
24.8
26.0
34.5
42.5
52.0
61.0
77.0
18.0
24.5
31.5
40.0
46.0
59.0
6
7
9
12
14
20
M1
Cable assembly
(pages 163 and 164)
Note:
1) to order, add a «Z» at
the end of the reference.
The bend relief must
be ordered separately
(see page 141).
www.lemo.com
®
®
FFP Straight plug, cable collet
and inner anti-rotating device
Reference
~L
øA
~M
Dimensions (mm)
Model
Series
A
L
FFP
FFP
FFP
FFP
1S
2S
3S
4S
12.0
14.8
17.8
24.8
42.5
52.0
61.0
77.0
M
S2
31.5 8.5
40.0 11.0
46.0 14.0
59.0 19.0
M1 Cable assembly (pages 163 and 164)
S2
FFB Straight plug, cable collet
and safety locking ring
Reference
~L
øA
~M
Dimensions (mm)
Model
Series
A
L
FFB
FFB
FFB
FFB
0S
1S
2S
3S
9.0
12.0
14.8
17.8
36.8
45.0
55.5
65.0
M
S2
26.8 6.5
34.0 8.5
43.5 11.0
50.0 14.0
M1 Cable assembly (pages 163 and 164)
S2
Note: nut for fitting a bend relief (available only for size 1S).
FFE Straight plug, cable collet, front seal
and nut for fitting a bend relief 1)
(protected to IP54 when mated)
Reference
~L
øA
~M
Dimensions (mm)
Model
Series
A
L
M
S2
FFE
FFE
FFE
FFE
FFE
00
0S
1S
2S
3S
7.4
10.0
13.0
16.0
19.0
26.0
34.5
42.5
52.0
61.0
18.0
24.5
31.5
40.0
46.0
6
7
9
12
14
M1 Cable assembly (pages 163 and 164)
S2
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
FFL
Straight plug, flats on latch sleeve,
cable collet and inner anti-rotating device
Reference
Dimensions (mm)
~L
øA
~M
S2
www.lemo.com
S1
Model
Series
FFL
2S
A
L
M
15.0 49.0 37.0
S1
S2
13
12
M4 Cable assembly (page 165)
Note: this model is fitted with a «D or M» type collet system.
It is also adapted for crimp contacts.
Available only for multipole.
59
®
®
FFF
Straight plug, non-latching, cable collet
Reference
~L
øA
~M
Dimensions (mm)
Model
Series
A
L
M
FFF
FFF
FFF
FFF
00
0S
1S
2S
6.4
9.0
12.0
14.8
26.0
34.5
42.5
52.0
S2
18.0 4.5
24.5 6.5
31.5 8.5
40.0 11.0
M1 Cable assembly (pages 163 and 164)
S2
FFS Straight plug for cable crimping
Reference
L
øA
M
S1
Dimensions (mm)
Model
Series
A
L
M
S1
S2
FFS
00
6.4
31
23
5.5
5.5
M5 Cable assembly (page 163)
Note: Model available only with crimp backnut E31 similar to 00.250 series.
S2
FZP Straight plug for remote handling, cable collet
and inner anti-rotating device
Reference
~L
øA
~M
S2
N
Dimensions (mm)
Model
Series
A
L
M
N
S2
S3
FZP
FZP
FZP
FZP
FZP
FZP
1S
2S
3S
4S
5S
6S
16
24
24
35
43
60
42.5
52.0
61.0
77.0
103.0
106.0
31.5
40.0
46.0
59.0
78.0
81.0
15
21
24
30
44
44
8.5
11.0
14.0
19.0
29.0
38.0
12
18
18
28
35
50
S3
M1 Cable assembly (pages 163 to 165)
FAA Fixed plug non-latching, nut fixing
Reference
L maxi
øA
M
e
øB
S3
E maxi
S1
Dimensions (mm)
Model
Series
A
B
e
E
L
L1)
M
S1
S3
FAA
FAA
FAA
FAA
FAA
FAA
FAA
FAA
00
0S
1S
2S
3S
4S
5S
6S
8
10
14
18
22
28
40
54
10.2
12.4
15.8
19.2
25.0
34.0
40.0
54.0
M7x0.5
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M25x1.0
M35x1.0
M48x1.5
2.0
2.0
2.5
4.0
4.0
2.5
2.5
2.5
–
18.5
22.5
25.0
31.0
35.5
45.0
45.0
15.5
18.0
21.7
25.3
29.0
39.0
–
–
9.0
11.2
12.5
13.8
17.0
20.5
28.0
28.0
6.3
8.2
10.5
13.5
16.5
23.5
33.5
–
9
11
14
17
22
30
–
–
P1 Panel cut-out (page 152)
P2 Panel cut-out 6S series (page 152)
Note: 1) unipole model
60
www.lemo.com
®
®
FLC/FLM Elbow (90°) plug, cable collet
L
M
~H
A
S2
S1
Dimensions (mm)
Reference
Model
Series
A
H
FLC
FLM
FLM
FLM
00
0S
1S
2S
7.5
9.5
12.0
14.8
16.3
23.0
27.0
35.0
L
M
S1
S2
17.2 9.2 4.5
28.0 18.0 7.0
35.3 24.3 9.0
40.0 28.0 12.0
6
8
10
13
M3 Cable assembly (pages 163 to 165)
Note: FLC.00 model is used for the unipole type.
FLA Elbow (90°) plug, cable collet
Dimensions (mm)
Reference
L
fig. 1
fig. 2
A
A1
M
Series
A
A1
H
L
M
S1
S2
FLA
FLA
FLA
FLA
3S
4S
5S
6S
21
28
–
–
21
28
37
48
44.0
56.0
76.5
94.0
38.5
49.0
65.0
81.0
23.5
31.0
40.0
56.0
15
20
30
40
14.0
19.0
29.0
38.0
M3 Cable assembly (pages 163 to 165)
S1
~H
Model
Note:
fig. 1 is used for the unipole type, fig. 2 is used for the multipole type.
S2
● Maximum operating temperature: 120°C
FLS Elbow (90°) plug for cable crimping
L
A
H
M
Dimensions (mm)
Reference
Model
Series
A
H
L
M
FLS
00
9
16
17.5
9.5
M6 Cable assembly (page 163)
Note: Model available only with crimp backnut E31 similar to 00.250 series.
● Maximum operating temperature: 120°C
ERA Fixed socket, nut fixing
Dimensions (mm)
Reference
Model
Series
A
B
e
E
L
L1)
M
S1
S3
ERA
ERA
ERA
ERA
ERA
ERA
ERA
ERA
00
0S
1S
2S
3S
4S
5S
6S
8
10
14
18
22
28
40
54
10.2
12.4
15.8
19.2
25.0
34.0
40.0
54.0
M7x0.5
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M25x1.0
M35x1.0
M48x1.5
5.5
7.0
7.5
8.5
11.5
12.0
15.5
16.0
–
17.5
20.2
24.5
29.0
34.0
45.0
45.0
14.5
18.0
20.5
23.5
27.5
33.5
78.5
–
1.0
1.2
1.5
1.8
2.0
2.5
3.0
3.5
6.3
8.2
10.5
13.5
16.5
23.5
33.5
45.5
9
11
14
17
22
30
–
–
L maxi
M
øA
e
øB
S3
E maxi
S1
P1 Panel cut-out (page 152)
Note: 1) unipole model
Note: the 5S series is delivered with a tapered washer and a round nut.
The 6S series is delivered without a locking washer and with a round nut.
www.lemo.com
61
®
®
ERN Fixed socket, nut fixing, with earthing tag
L maxi
øA
e
øB
Dimensions (mm)
Reference
M
S3
E maxi
S1
Model
Series
A
B
ERN
ERN
ERN
ERN
0S
1S
2S
3S
10
14
18
22
12.4
15.8
19.2
25.0
e
L
L1)
19.3
22.4
26.3
29.8
19.3
22.4
26.3
29.8
E
M9x0.6 7.0
M12x1.0 7.5
M15x1.0 8.5
M18x1.0 11.5
M
S1 S3
1.2 8.2 11
1.5 10.5 14
1.8 13.5 17
2.0 16.5 22
P1 Panel cut-out (page 152)
Note: 1) unipole model
ERC Fixed socket, nut fixing with slot in the flange
L maxi
Reference
F
øA
M
e
øB
S3
Model
Series
ERC
ERC
ERC
00
0S
1S
Dimensions (mm)
A
B
e
E
F
L1)
L
M
S1 S3
8 10.2 M7x0.5 5.5 1.6 – 14.5 1.0 6.3 9
10 12.4 M9x0.6 7.0 2.0 17.5 18.0 1.2 8.2 11
14 15.8 M12x1.0 7.5 2.5 20.2 20.5 1.5 10.5 14
S1
E maxi
P1 Panel cut-out (page 152)
Note: 1) unipole model
ERS Fixed socket, nut fixing, long threaded shell,
without flats
L maxi
M
Reference
øA
e
øB
S3
Model
Series
ERS
0S
Dimensions (mm)
A
B
e
E
L
L1)
M
S3
10 12.4 M9x0.6 10.5 17.5 18.0 1.2
11
P2 Panel cut-out (page 152)
E maxi
Note: 1) unipole model
EHP Fixed socket, nut fixing, protruding shell
L maxi
øA
E maxi
Dimensions (mm)
Reference
M
e
øB
S3
Model
Series
EHP
EHP
EHP
0S
1S
3S
A
B
e
E
L
L1)
M
S1
S3
10 12.4 M9x0.6 2.0 20.5 18.0 12.5 8.2 11
14 15.8 M12x1.0 3.5 20.2 20.5 12.0 – 14
22 25.0 M18x1.0 4.0 29.0 29.0 18.7 – 22
S1
P1 Panel cut-out 0S series (page 152)
P2 Panel cut-out (page 152)
Note: 1) unipole model
62
www.lemo.com
®
®
EBD Fixed socket with square flange
and screw fixing
L maxi
A
M
H
øB
Reference
Dimensions (mm)
Model
Series
A
B
C
EBD
2S
22
15
3.2
L1)
M
26
2
L1)
M
12.4 20.2 20.5
1.5
H
L
15.5 24.5
P6 Panel cut-out (page 152)
øC
Note: 1) unipole model
EBS Fixed socket with round flange
and screw fixing
L maxi
M
H
Dimensions (mm)
øB
øA
Reference
Model
Series
A
B
C
EBS
1S
22
11
2.5
H
L
P7 Panel cut-out (page 152)
øC
Note: 1) unipole model
EBC Fixed socket with square flange,
protruding shell and screw fixing
A
L maxi
Reference
M
øB
H
øC
N
Dimensions (mm)
Model
Series
A
B
C
H
L
L1)
M
N
EBC
EBC
EBC
EBC
1S
2S
3S
5S
18
22
25
45
11.5
15.0
18.0
40.0
3.2
3.2
3.2
4.3
12.7
15.5
18.0
36.8
20.2
24.5
29.0
45.0
20.5
23.5
27.5
78.5
16.5
18.5
23.5
15.0
2.8
4.4
3.0
4.0
P6 Panel cut-out (page 152)
Note: 1) unipole model
EEP Fixed socket, nut fixing
(back panel mounting)
L maxi
P
Reference
E maxi
øA
M
e
øB
S2 S1
Model
Series
EEP
EEP
1S
2S
Dimensions (mm)
A
B
e
E
L
L1)
M
P
S1 S2
16 16.0 M12x1 6.5 20.2 20.5 3.5 11 10.5 13
20 19.5 M15x1 4.3 24.5 23.5 3.5 9 13.5 15
P1 Panel cut-out (page 152)
Note: 1) unipole model
www.lemo.com
63
®
®
ERD Fixed socket with two nuts (back panel mounting)
Reference
Dimensions (mm)
L maxi
e
øA
M
øB
S3
S 1 E maxi
Model
Series
A
B
e
E
L
L1)
M
ERD
ERD
ERD
ERD
ERD
0S
1S
2S
3S
4S
12
16
20
24
30
12.4
15.8
19.2
25.0
34.0
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M25x1.0
5.5
6.0
6.5
9.0
10.0
17.5
20.2
24.5
29.0
34.0
18.0
20.5
23.5
27.5
33.5
2.5
3.5
3.5
4.5
4.5
S1 S3
8.2
10.5
13.5
16.5
23.5
11
14
17
22
30
P1 Panel cut-out (page 152)
Note: 1) unipole model.
The 3S and 4S series are delivered with a conical nut.
ECP Fixed socket with two nuts, long threaded shell
(back panel mounting)
L maxi
Reference
øA
e
øB
S1
Dimensions (mm)
M
S3
E maxi
Model
Series
A
ECP
ECP
ECP
ECP
0S
1S
2S
3S
12
16
20
24
B
e
E
L
12.4 M9x0.6 8.5 17.5
15.8 M12x1.0 10.0 20.2
19.2 M15x1.0 11.0 24.5
25.0 M18x1.0 14.0 29.0
L1)
18.5
21.5
26.0
30.0
M
S1
2.5 8.2
3.5 10.5
3.5 13.5
4.5 16.5
S3
11
14
17
22
P1 Panel cut-out (page 152)
Note: 1) unipole model.
The 3S series is delivered with a conical nut.
ECP Fixed socket with two nuts, long threaded shell,
with straight contact for printed circuit
(back panel mounting)
Reference
N
M
e
øB
S3
øA
L
S1
E maxi
Dimensions (mm)
Model
Series
A
ECP
ECP
ECP
ECP
0S
1S
2S
3S
12
16
20
24
B
e
E
M
12.4 M9x0.6 8.5 2.5
15.8 M12x1.0 10.0 3.5
19.2 M15x1.0 11.0 3.5
25.0 M18x1.0 14.0 4.5
P1 Panel cut-out (page 152)
N
S1
15.0 8.2
17.5 10.5
20.0 13.5
24.0 16.5
S3
11
14
17
22
P21 PCB drilling pattern (page 159)
Note: this contact type is available for all E●● socket models.
See page 159 for table of available types.
Length «L» depends on the number of contacts, see table on page 159.
The 3S series is delivered with a conical nut.
ECP Fixed socket with two nuts, long threaded shell,
with elbow (90°) contacts for printed circuit
(back panel mounting)
L
N
20 mini
E maxi
Dimensions (mm)
Reference
øA
M
e
øB
S3S1
Model
Series
A
ECP
ECP
ECP
ECP
0S
1S
2S
3S
12
16
20
24
B
e
E
M
12.4 M9x0.6 8.5 2.5
15.8 M12x1.0 10.0 3.5
19.2 M15x1.0 11.0 3.5
25.0 M18x1.0 14.0 4.5
P1 Panel cut-out (page 152)
N
S1
15.0 8.2
17.5 10.5
20.0 13.5
24.0 16.5
S3
11
14
17
22
P24 PCB drilling pattern (page 160)
2
Note: this contact type is available for all back panel mounting socket types.
See page 160 for available types.
Length «L» depends on the number of contacts, see PCB drilling pattern on page 160.
The 3S series is delivered with a conical nut.
64
www.lemo.com
®
®
PCA Free socket, cable collet
Reference
øA
~L
S2
Model
Series
PCA
PCA
PCA
PCA
PCA
PCA
PCA
PCA
00
0S
1S
2S
3S
4S
5S
6S
Dimensions (mm)
A
L
6.5 25.0
8.9 33.5
11.9 40.5
14.8 50.0
17.8 59.0
24.8 75.0
34.7 99.0
46.0 102.0
S2
4.5
6.5
8.5
11.0
14.0
19.0
29.0
38.0
M1 Cable assembly (pages 163 to 165)
PCA Free socket with oversize cable collet 1)
Reference
øA
øB
~L
Model
Series
A
PCA
PCA
PCA
PCA
PCA
PCA
00
0S
1S
2S
3S
4S
6.5
8.9
11.9
14.8
17.8
24.8
B
L
8.0 33.0
10.0 44.5
13.0 55.0
18.0 65.0
21.0 83.0
31.8 105.0
S1
S2
7.0
9.0
12.0
14.0
19.0
28.5
6.5
8.5
11.0
14.0
19.0
29.0
M2 Cable assembly (pages 164 and 166)
S1
S2
Dimensions (mm)
Note: 1) correspond to K type of collet, the fitting of oversize collets onto this
model allows them to be fitted to the cables that can be accommodated by
the next housing size up (see page 102).
PCA Free socket, cable collet
and nut for fitting a bend relief 1)
Reference
øA
~L
S2
Dimensions (mm)
Model
Series
A
L
S2
PCA
PCA
PCA
PCA
PCA
PCA
00
0S
1S
2S
3S
4S
6.5
8.9
11.9
14.8
17.8
24.8
25.0
33.5
40.5
50.0
59.0
75.0
6
7
9
12
14
20
M1
Cable assembly
(pages 163 and 164)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
PCP Free socket, cable collet
and inner anti-rotating device
Reference
øA
~L
S2
www.lemo.com
Dimensions (mm)
Model
Series
A
PCP
PCP
PCP
PCP
1S
2S
3S
4S
11.9
14.8
17.8
24.8
L
S2
40.5 8.5
50.0 11.0
59.0 14.0
75.0 19.0
M1 Cable assembly (pages 163 and 164)
65
®
®
PZP Free socket for remote handling
with cable collet and inner anti-rotating device
Reference
øA
~L
Dimensions (mm)
Model
Series
A
L
N
S2
S3
PZP
PZP
PZP
1S
2S
3S
16
24
24
40.5
50.0
59.0
15
21
24
8.5
11.0
14.0
12
18
18
M1 Cable assembly (pages 163 and 164)
S2
N
S3
PSA Fixed socket, nut fixing, cable collet
Reference
~L
e
øB
M
øA
S3
Dimensions (mm)
Model
Series
A
B
e
E
L
M
S1
PSA
PSA
PSA
PSA
PSA
PSA
PSA
PSA
00
0S
1S
2S
3S
4S
5S
6S
8
10
14
18
22
28
40
54
10.2
12.4
15.8
19.2
25.0
34.0
40.0
54.0
M7x0.5
M9x0.6
M12x1.0
M15x1.0
M18x1.0
M25x1.0
M35x1.0
M48x1.5
5.5
7.0
7.5
8.5
11.5
12.0
15.5
16.0
25.0
33.5
40.5
50.0
59.0
75.0
99.0
102.0
1.0
1.2
1.5
1.8
2.0
2.5
3.0
3.5
6.3
8.2
10.5
13.5
16.5
23.5
33.5
45.5
S2 S3
4.5
6.5
8.5
11.0
14.0
19.0
29.0
38.0
9
11
14
17
22
30
–
–
M1 Cable assembly (pages 163 to 165)
E maxi
S2
S1
P1 Panel cut-out (page 152)
Note: the 5S series is delivered with a tapered washer and a round nut.
The 6S series is delivered without a locking washer and with a round nut.
PSP Fixed socket, nut fixing, cable collet
and inner anti-rotating device
Dimensions (mm)
Reference
~L
e
øB
M
øA
S3
Model
Series
A
B
e
E
L
M
PSP
PSP
PSP
PSP
1S
2S
3S
4S
14
18
22
28
15.8
19.2
25.0
34.0
M12x1.0
M15x1.0
M18x1.0
M25x1.0
7.5
8.5
11.5
12.0
40.5
50.0
59.0
75.0
1.5
1.8
2.0
2.5
S1
S2
S3
10.5 8.5 14
13.5 11.0 17
16.5 14.0 22
23.5 19.0 30
M1 Cable assembly (pages 163 and 164)
E maxi
S2
S1
P1 Panel cut-out (page 152)
PSS Free socket, nut fixing for cable crimping
Reference
L
S3
øB
øA
e
M
Model
Series
PSS
00
Dimensions (mm)
A
B
e
8 10.2 M7x0.5
E
L
M
S1
S2
S3
5.5
30
1
6.3
5.5
9
M5 Cable assembly (page 163)
P1 Panel cut-out (page 152)
S2
66
E maxi
S1
Note: Model available only with crimp backnut E31 similar to 00.250 series.
www.lemo.com
®
®
RMA Free coupler
Reference
øA
~L
Dim. (mm)
Model
Series
A
L
RMA
RMA
RMA
RMA
RMA
RMA
RMA
00
0S
1S
2S
3S
4S
5S
6.4
8.9
11.9
14.8
17.8
24.8
34.7
22.0
25.0
28.5
31.5
38.5
46.5
60.5
Note: see page 101 for the available plug and contact configurations and
in order to ensure correct contact alignment.
RAD Fixed coupler, nut fixing
Reference
L
e
øA
M
E maxi
øB
S3
S1
Dimensions (mm)
Model
Series
A
B
RAD
RAD
RAD
RAD
RAD
RAD
RAD
00
0S
1S
2S
3S
4S
5S
8
10
14
18
22
28
40
10.2
12.4
15.8
19.2
25.0
34.0
40.0
e
E
L
M
S1
S2
M7x0.5 5.5 22.0 1.0 6.3 9
M9x0.6 7.0 25.0 1.2 8.2 11
M12x1.0 7.5 28.5 1.5 10.5 14
M15x1.0 8.5 31.5 1.8 13.5 17
M18x1.0 11.5 38.5 2.0 16.5 22
M25x1.0 12.0 46.5 2.5 –
30
M35x1.0 15.5 60.5 3.0 –
–
P1 Panel cut-out (page 152)
P2 Panel cut-out 4S and 5S series (page 152)
Note: see page 101 for the available plug and contact configurations and
in order to ensure correct contact alignment.
Note: the 5S series is delivered with a tapered washer and a round nut.
FTA T-plug with two in line sockets
Reference
A
H
I
L
Dimensions (mm)
Model
Series
A
FTA
FTA
FTA
FTA
00
0S
1S
3S
9
13
16
21
H
I
17.5
9.5
23.0 13.0
26.5 16.5
38.5 23.5
L
30
38
45
64
Note: multipole version available only with 2 contacts (type 302).
www.lemo.com
67
®
®
Elbow socket models
Technical Characteristics
Materials and Treatment
Types
Component
Surface
Treat. (µm)
Material
Cu
PPS
Brass
Brass
Bronze
PEEK
Bronze
1)
Housing
Metallic parts
Earthing crown
Insulator
Female contact
Series
Type
1
302
2
2
2
3
0S, 1S
303
2
304
2
3
305
3
0.5
–
3
3
3
–
3
Au
–
–
–
1.5
Note: 1) not used for all sizes.
The surface treatment standards are as follows:
– Nickel SAE AMS QQ N 290
– Gold: ISO 27874
1
0S, 1S
0.5
0.5
0.5
Ni
Electrical
1
3
1
1
1
4
2
3
1
4
2
3
306
5
1
4
5
16
1S
6
Model
Series
EPL
EXP
EPL
EXP
EPL
EXP
0S
0S
1S
1S
1S
1S
302-303-304
1.20
4.5
305-306
0.70
4.5
Types
2
1S
5
1
4
Rated
current (A)
3
Test voltage
(kV rms)1)
2
0S, 1S
2
5
3
4
4
Note:
1) see calculation method, caution and suggested standard on page 178.
øA
7.62
EPL Elbow (90°) socket for printed circuit
(solder or screw fixing)
EPL.0S.302.HLN
EPL.0S.303.HLN
EPL.0S.304.HLN
EPL.1S.302.HLN
EPL.1S.303.HLN
EPL.1S.304.HLN
EPL.1S.305.HLN
EPL.1S.306.HLN
L
K
3.2
H
I
N
ø 0.7
M 1.6
Part Number
D
A
9
D
Dimensions (mm)
H
I
K
L
N
14.6 6.7 12.6 13.3 25 11.7
11 16.6 7.5 14.0 13.3 27 12.6
Note: to replace the 4 ground pins by 4 screws (M1.6) add an «S» to the
end of the part number. (e.g.: EPL.1S.303.HLNS)
P22 PCB drilling pattern (page 160)
68
www.lemo.com
®
®
EPL Elbow (90°) socket for printed circuit
7
øA
5.08
Part Number
L
6.8
10
7
H
I
EPL.00.113.NLN
Dim. (mm)
A
H
I
P23 PCB drilling pattern (page 160)
ø 0.7
EPL Elbow (90°) socket for printed circuit
K
5.08
2.54
Part Number
L
N
I
øA
EPL.0S.116.DTL
A
D
8.8
16
Dimensions (mm)
H
I
K
L
12
9
7.7 22.7
N
9
Note: available only in unipole version.
3
P23 PCB drilling pattern (page 160)
Ø1
D
EXP Elbow (90°) socket for printed circuit with two nuts
(solder or screw fixing)
7.62
N
Part Number
K
L
S3
e
B
D
e
Dimensions (mm)
E H
I
K
L
M
N
S3
12 12.4 14.6 M9x0.6 6.0 6.7 12.6 13.3 25 2.5 11.7 11
14 15.0 16.6 M11x0.5 7.5 7.5 14.0 13.3 27 3.5 12.6 13
H
I
øA
M
EXP.0S.302.HLN
EXP.0S.303.HLN
EXP.0S.304.HLN
EXP.1S.302.HLN
EXP.1S.303.HLN
EXP.1S.304.HLN
EXP.1S.305.HLN
EXP.1S.306.HLN
A
3.2
øB
Note: to replace the 4 ground pins by 4 screws (M1.6) add an «S» to the end of the part
number. (e.g.: EXP.1S.303.HLNS).
ø 0.7
M 1.6
E maxi
P2 Panel cut-out 0S series (page 152)
D
2.54
P10 Panel cut-out 1S series (page 152)
P22 PCB drilling pattern (page 160)
www.lemo.com
69
®
®
Plastic housing models
These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The
design, including a latch sleeve and a metal earthing crown, guarantees EMC screening efficiency to meet most requirements.
Technical Characteristics
Mechanical and Climatical
Value
Characteristics
PEEK
Colour
Endurance
Humidity
Temperature range
Sterilization resistance 1)
Resistance to organic solvents
POM
natural (beige)
> 5000 cycles
PSU
Standard
PPSU
black
white or grey
> 5000 cycles > 5000 cycles
up to 95% at 60° C
- 50° C/+250° C - 50° C/+115° C - 50° C/+150° C
> 200 cycles
none
~20 cycles
very good
very good
limited
cream
> 5000 cycles
–
IEC 60512-5 test 9a
–
- 50° C/+180° C
–
> 100 cycles
IEC 60601-1 § 44.7
good
–
Note:
1) Steam sterilization
FFA Straight plug, cable collet, PEEK or POM
outer shell
FFP Straight plug, cable collet, PEEK or POM
outer shell and inner anti-rotating device
~L
Reference
øA
~M
S2
Dimensions (mm)
Model
Series
A
L
FFA
FFP
FFP
FFP
00
1S
2S
3S
7.0
12.0
15.0
18.0
33.5
42.5
52.0
61.0
M
S2
25.5 6.0
31.5 10.0
40.0 12.0
46.0 14.0
M1
Cable assembly
(pages 163 and 164)
FFP Straight plug, cable collet, PEEK or POM
outer shell, inner anti-rotating device
and nut for fitting a bend relief 1)
Reference
~L
øA
~M
Model
Series
FFP
FFP
FFP
1S
2S
3S
Dimensions (mm)
A
L
M
S2
12.0 41.5 30.5 10.0
15.0 51.0 39.0 12.0
18.0 61.0 46.0 14.0
M1 Cable assembly (pages 163 and 164)
S2
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
FFL
Straight plug, cable collet, with PSU
and PPSU outer shell, inner anti-rotating device
and nut for fitting a bend relief 1)
Reference
Model
Series
FFL
2S
Dimensions (mm)
A
L
M
S2
~L
16.5 51.5 39.5
13
~M
øA
M4 Cable assembly (page 165)
S2
70
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
This model is fitted with a «D or M» type collet system.
It is also adapted for crimp contacts.
Available only for multipole.
www.lemo.com
®
®
ERN Fixed socket, nut fixing,
with earthing tag, PEEK or POM outer shell
M
øA
e
øB
E maxi
Dimensions (mm)
Reference
L maxi
S3
S1
Model
Series
A
B
ERN
ERN
ERN
ERN
ERN
00
0S
1S
2S
3S
9
11
14
18
22
10.2
12.4
15.8
19.2
25.0
e
E
M7x0.5 5.5
M9x0.6 6.4
M12x1.0 7.5
M15x1.0 8.5
M18x1.0 11.5
L
L1)
–
19.3
22.4
26.3
29.8
14.5
19.3
22.4
26.3
29.8
M
S1
S3
1.0 6.3 9
1.8 8.2 11
1.5 10.5 14
2.0 13.5 17
2.0 16.5 22
P1 Panel cut-out (page 152)
Note: 1) unipole model
www.lemo.com
71
®
®
Watertight or vacuumtight models
These socket or coupler models allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529.
They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at
the end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance
Humidity
Temperature range (0S-1S)
Temperature range (2S-6S)
Salt spray corrosion test
Climatical category
Leakage rate (He)1)
Value
Standard
> 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 20° C/+100° C
- 20° C/+80° C
> 1000h
IEC 60512-6 test 11f
20/80/21
IEC 60068-1
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
Note: 1) only for vacuumtight models.
Characteristics
Value
0S
1S
2S
3S
4S
5S
6S
Maximum
operating pressure2)
Standard
60 bar
60 bar
40 bar
30 bar
15 bar
5 bar
5 bar
IEC 60512-7 test 14d
Note: 2) this value corresponds to the maximum allowed pressure difference for the assembled socket.
HGP Fixed socket, nut fixing, watertight or vacuumtight
Dimensions (mm)
Reference
L maxi
øA
M
e
øB
S3 S1
E maxi
Model
Series
A
B
e
E
L
L1)
M
S1
S3
HGP
HGP
HGP
HGP
HGP
HGP
HGP
0S
1S
2S
3S
4S
5S
6S
18
20
20
28
34
45
58
15.8
19.2
21.5
27.0
34.0
40.0
54.0
M12x1.0
M14x1.0
M16x1.0
M20x1.0
M25x1.0
M35x1.0
M48x1.5
11.5
15.5
17.0
18.0
22.5
28.0
22.0
20.5
25.0
29.5
33.0
39.0
50.5
51.0
21.5
22.0
28.0
34.0
43.0
78.5
–
4.0
4.0
4.0
6.0
6.5
7.5
6.0
10.5
12.5
14.5
18.5
23.5
33.5
45.5
14
17
19
24
30
–
–
Note: 1) unipole model
P3 Panel cut-out (page 152)
Note: the 5S and 6S series are delivered with a round nut.
HGW Fixed socket, nut fixing, with back washer,
watertight or vacuumtight
L maxi
S3
M
Dimensions (mm)
E mini/maxi
øA
e
øB
Reference
Model
Series
HGW
HGW
0S
1S
A
B
e
E
E
mini
maxi
10 15 M9x0.6 2.0
14 18 M12x1.0 2.0
L
M
S3
3.0 20.5 1.2
4.0 25.0 1.5
11
14
P11 Panel cut-out (page 152)
Note: vacuumtight version is only available in the 0S series.
72
www.lemo.com
®
®
EWB Fixed socket, nut fixing, with two flats
on the flange, watertight or vacuumtight
L maxi
Reference
øA
M
e
øB
S3 S1
S4
E maxi
Dimensions (mm)
Model
Series
A
B
e
E
L
L1)
M
EWB
EWB
EWB
EWB
0S
1S
2S
4S
18
20
20
34
15.8
19.2
21.5
34.0
M12x1.0
M14x1.0
M16x1.0
M25x1.0
11.0
15.5
17.0
22.5
20.5
25.5
28.0
43.0
–
25.5
26.5
–
4.0
4.0
4.0
6.5
S1 S3 S4
10.5
12.5
14.5
23.5
14
17
19
30
14
16
16
27
P3 Panel cut-out (page 152)
Note: 1) unipole model
HCP Fixed socket, nut fixing, watertight
or vacuumtight (back panel mounting)
L maxi
M
S1
Dimensions (mm)
E maxi
P
øA
e
øB
Reference
Model
Series
A
B
e
E
L
M
P
S1
HCP
HCP
HCP
1S
2S
4S
18
20
27
20 M14x1.0 8.6 25.5 3.5 12.0 –
20 M16x1.0 12.5 29.0 3.5 16.5 14.5
34 M25x1.0 15.5 41.0 4.5 20.0 23.5
P3 Panel cut-out (page 152)
Note: the 2S and 4S series are delivered with a conical nut.
SWH Fixed coupler, nut fixing,
watertight or vacuumtight
Dimensions (mm)
Reference
L
øA
e
øB
M
S3
E maxi
S1
Model
Series
A
B
e
E
L
M
S1
S3
SWH
SWH
SWH
SWH
SWH
SWH
SWH
0S
1S
2S
3S
4S
5S
6S
14
17
20
25
34
45
58
13.8
15.8
21.5
27.0
34.0
40.0
54.0
M10x0.75
M12x1.00
M16x1.00
M20x1.00
M25x1.00
M35x1.00
M48x1.50
17
28
25
30
50
58
55
34
39
44
53
65
80
81
2.0
2.5
4.0
4.0
4.0
5.0
6.0
9.0
10.5
15.0
18.5
23.5
33.5
45.5
12
14
19
24
30
–
–
P4 Panel cut-out (page 152)
Note: see page 101 for the available plug and contact configurations and
in order to ensure correct contact alignment.
The 5S and 6S series are delivered with a round nut.
www.lemo.com
73
®
®
E Series
E series connectors have been specifically designed for outdoor applications.
They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,
free socket, fixed socket or coupler. All models of these series are watertight when mated and give a protection index of IP
68 as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP 66 otherwise).
– security of the Push-Pull latching system
– watertight connection (IP 68/IP 66)
– unipole types transmitting current up to 230 A
– polarization by stepped insert (half-moon)
and multipole types with up to 106 contacts
fitted with male and female contacts
– wide range of models satisfying most applications
– solder or print contacts (straight or elbow)
– 360° screening for full EMC shielding
– rugged housing for extreme working condition.
Metal housing models (page 76)
Straight plug
Straight plugs
FZP
FFA, FFP
Fixed sockets
Free sockets
ERA
EEP
ERC
EEP
ERB
EEP
PCA, PCP
Fixed plug
FFA
PCA
FAA
Elbow plug
FFA
PCA
Fixed socket
FLM
FFF
EHP
PSA
FLA
Free coupler
Watertight or vacuumtight models (page 82)
Fixed sockets
HGP
74
Fixed coupler
EBR
RMA
SWH
www.lemo.com
®
®
Part Numbering System
Plug
FFA . 1E . 304 . C
L
A C 35
Free socket
PCA . 1E . 304 . C
L
L
C 35 Z
Variant: (page 107)
Cable ø: (page 105)
Collet type: (page 105)
Fixed socket
ERA . 1E . 304 . C
L
L
Coupler
RMA . 1E . 304 . C
L
L
Variant: (page 107)
Model: (page 76)
Contact: (page 99)
Series: (page 76)
Insulator: (page 99)
Insert configuration: (page 91)
Housing: (page 99)
Part Number Example
Straight plug with cable collet:
FFA.1E.304.CLAC35 = straight plug with cable collet, 1E series, multipole type with 4 contacts, outer shell in chromeplated brass, PEEK insulator, 2 male and 2 female solder contacts, C type collet for a 3.5 mm diameter cable.
Free socket:
PCA.1E.304.CLLC35Z = free socket with cable collet, 1E series, multipole type with 4 contacts, outer shell in chromeplated brass, PEEK insulator, 2 female and 2 male solder contacts, C type collet for a 3.5 mm diameter cable and collet nut
for fitting a bend relief.
Fixed socket:
ERA.1E.304.CLL = fixed socket, nut fixing, 1E series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK
insulator, 2 female and 2 male solder contacts.
Free coupler:
RMA.1E.304.CLL = straight coupler, 1E series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK
insulator, 2 female and 2 male contacts each end.
Part Section Showing Internal Components
Straight plug
Fixed socket
5
1
2
3
4
5
6
7
8
outer shell
earthing crown
retaining ring
hexagonal nut
insulator
male contact
female contact
o-ring
www.lemo.com
2
3
8
4
1
8
7
6
9
8
2
3
7
6
1
4
10
12
13
11
5
1
2
3
4
5
6
7
8
9
10
11
12
13
outer shell
latch sleeve
inner shell
retaining ring
collet nut
centre-piece
insulator
male contact
female contact
earthing cone
collet
gasket
washer
75
®
®
Metal housing models
Technical Characteristics
Mechanical and Climatical
Characteristics
Electrical
Value
Endurance
Humidity
Temperature range1)
Resistance to vibrations
Shock resistance
Salt spray corrosion test
Protection index (mated)2)
Climatical category
Standard
> 5000 cycles
IEC 60512-5 test 9a
up to 95% at 60° C
- 55° C, +200° C
10-2000 Hz, 15 g IEC 60512-4 test 6d
100 g, 6 ms
IEC 60512-4 test 6c
> 1000h
IEC 60512-6 test 11f
IP 68/IP 66
IEC 60529
50/175/21
IEC 60068-1
Characteristics
Value
at 10 MHz
at 1 GHz
Shielding
efficiency
Standard
> 95 dB
> 80 dB
IEC 60169-1-3
IEC 60169-1-3
Note: the various tests have been carried out with FFA and ERA connector pairs, with chrome-plated brass shell, PEEK insulator and silicone
O-ring. Detailed electrical characteristics, as well as materials and treatment
are presented in the chapter Technical Characteristics on page 171.
1) minimum operating temperature is -20°C for sockets fitted with an FPM
(Viton®) O-ring.
2) IP68 achieved providing that the cable is perfectly circular and that
assembly process ensures a high integrity seal.
FFA Straight plug, cable collet
Reference
Model
FFA
FFA
FFA
FFA
FFA
FFA
FGG1)
~L
øA
~M
Dimensions (mm)
Series
A
L
M
S2
0E
1E
2E
3E
4E
5E
6E
11
13
16
19
25
38
47
34
42
52
61
71
92
118
23.0
28.0
36.0
41.0
50.5
67.0
89.0
8
9
12
15
19
32
38
S2
M1
Cable assembly
(pages 167 and 168)
Note: 1) with key (G)
FFA Straight plug with oversize cable collet 1)
Reference
~L
øB
øA
~M
S2
Dimensions (mm)
Model
Series
A
B
L
M
S1
S2
FFA
FFA
FFA
FFA
1E
2E
3E
4E
13
16
19
25
14.5
17.0
22.0
36.0
55
65
80
118
41
49
60
84
12
15
19
30
12
15
19
32
M2 Cable assembly (pages 167 and 169)
Note: 1) correspond to K type of collet, the fitting of oversize collets onto this
model allows them to be fitted to the cables that can be accommodated by
the next housing size up (see page 105).
S1
FFA Straight plug, cable collet
and nut for fitting a bend relief 1)
Reference
~L
øA
~M
S2
76
Dimensions (mm)
Model
Series
A
L
M
S2
FFA
FFA
FFA
FFA
FFA
0E
1E
2E
3E
4E
11
13
16
19
25
34
42
52
60
71
23.0
28.0
36.0
40.0
50.5
7
9
12
15
19
M1
Cable assembly
(pages 167 and 168)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
www.lemo.com
®
FFF
Straight plug non-latching, cable collet
Reference
~L
øA
~M
®
Dimensions (mm)
Model
Series
A
L
M
S2
FFF
FFF
0E
1E
11
13
34
42
23
28
8
9
M1 Cable assembly (page 167)
S2
FFP Straight plug, cable collet
and inner anti-rotating device
Reference
~L
Model
Series
A
L
M
S2
FFP
FFP
3E
4E
19
25
61
71
41.0
50.5
15
19
øA
~M
Dimensions (mm)
M1 Cable assembly (pages 167 and 168)
S2
FZP Straight plug for remote handling, cable collet
and inner anti-rotating device
~L
Reference
øA
~M
S2
N
S1
Dimensions (mm)
Model
Series
A
L
M
N
S1
S2
FZP
FZP
FZP
FZP
FZP
1E
2E
3E
4E
5E
20
22
23
32
44
42
52
61
71
92
28.0
36.0
41.0
50.5
67.0
15
16
20
29
40
15
16
19
25
36
9
12
15
19
32
M1 Cable assembly (pages 167 and 168)
FAA Fixed plug non-latching, nut fixing
L maxi
Reference
E maxi
Dimensions (mm)
øA
M
e
øB
S3
Model
Series
A
B
e
E
L
L1)
M
FAA
FAA
FAA
FAA
0E
1E
2E
3E
18
20
25
31
19.2
21.5
27.0
34.0
M14x1.0
M16x1.0
M20x1.0
M24x1.0
3.5
3.5
4.0
4.5
19.5
23.0
27.0
32.5
19.5
23.0
27.0
32.5
13.0
16.0
18.0
22.5
S1 S3
12.5
14.5
18.5
22.5
17
19
24
30
S1
P1 Panel cut-out (page 153)
Note: 1) unipole model
www.lemo.com
77
®
®
FLM Elbow (90°) plug, cable collet
~L
S1
~M
Dimensions (mm)
~H
øA
Reference
S3
S2
Model
Series
A
D
H
L
M
S1
S2
S3
FLM
FLM
FLM
0E
1E
2E
11
13
16
7.3
8.7
10.2
25
33
40
36
42
51
25
28
35
9
11
14
8
9
12
8
10
13
M3 Cable assembly (page 162)
D
FLA Elbow (90°) plug, cable collet
~L
S1
Reference
Model
Series
FLA
FLA
3E
4E
Dimensions (mm)
A
D
H
L
M
S1
S2
S3
47
57
60
72
40.0
51.5
18
24
15
19
15
20
H
øA
~M
S3
S2
21.0 11.5
27.5 15.5
M3 Cable assembly (pages 167 and 168)
D
ERA Fixed socket, nut fixing
Reference
L maxi
Model
Series
A
B
e
E
L
0E
1E
2E
3E
4E
5E
6E
18
20
25
31
37
55
65
19.2
21.5
27.0
34.0
40.5
54.0
65.0
M14x1.0
M16x1.0
M20x1.0
M24x1.0
M30x1.0
M45x1.5
M55x2.0
5.5
9.0
9.0
11.0
9.0
10.0
10.5
19.5
24.0
28.5
34.0
36.0
44.5
48.5
L1)
M
S1
S3
øA
M
e
øB
S3
Dimensions (mm)
S1
E maxi
ERA
ERA
ERA
ERA
ERA
ERA
EGG2)
20.5 4.0 12.5
25.3 4.5 14.5
30.0 5.0 18.5
35.0 6.0 22.5
38.0 6.5 28.5
78.0 9.0 42.5
– 10.0 52.0
17
19
24
30
36
–
–
P1 Panel cut-out (page 153)
Note: The 5E and 6E series are delivered with a round nut.
1) unipole model. 2) with key (G).
ERC Fixed socket, nut fixing with slot in the flange
L maxi
S3
M
Reference
Series
ERC
ERC
ERC
0E
3E
4E
A
B
e
E
F
L
L1)
M
S1
S3
øA
e
øB
F
Model
Dimensions (mm)
E maxi
18 19.2 M14x1.0 5.5 1.5 19.5 20.5 4.0 12.5 17
31 34.0 M24x1.0 11 3.0 34.0 35.0 6.0 22.5 30
37 40.5 M30x1.0 9 3.0 36.0 38.0 6.5 28.5 36
S1
P1 Panel cut-out (page 153)
Note: 1) unipole model
78
www.lemo.com
®
®
ERB Fixed socket, nut fixing with two flats in the flange
S4
øA
M
e
øB
Dimensions (mm)
Reference
L maxi
S3
S1
E maxi
Model
Series
A
B
ERB
ERB
ERB
ERB
0E
1E
2E
3E
18
20
25
31
19.2
21.5
27.0
34.0
e
E
L
L1)
M
S1
M14x1.0 5.5 19.5 20.5 4.0
M16x1.0 9 24.0 25.3 4.5
M20x1.0 9 28.5 30.0 5.0
M24x1.0 11 34.0 35.0 6.0
12.5
14.5
18.5
22.5
S3 S4
17
19
24
30
14
17
20
24
P1 Panel cut-out (page 153)
Note: 1) unipole model
EEP Fixed socket, nut fixing (back panel mounting)
L maxi
Reference
Dimensions (mm)
P
e
øB
øA
M
S1
Model
Series
A
B
e
E
L
L1)
EEP
EEP
EEP
EEP
0E
1E
2E
3E
18
20
25
30
18
20
25
31
M14x1.0
M16x1.0
M20x1.0
M24x1.0
3.5
6.5
6.5
7.5
19.5
24.0
28.5
34.0
20.5
25.3
30.0
35.0
M
P
S1
3.5 7 12.5
3.5 10 14.5
3.5 10 18.5
4.5 12 22.5
P1 Panel cut-out (page 153)
E maxi
Note: 1) unipole model
Note: the 3E series is delivered with a conical nut.
EEP Fixed socket, nut fixing, with straight contact
for printed circuit (back panel mounting)
Reference
L
Dimensions (mm)
N
P
e
øB
øA
M
S1
Model
Series
A
B
e
E
M
N
P
S1
EEP
EEP
EEP
EEP
0E
1E
2E
3E
18
20
25
30
18
20
25
31
M14x1.0
M16x1.0
M20x1.0
M24x1.0
3.5
6.5
6.5
7.5
3.5
3.5
3.5
4.5
16.0
21.5
24.0
29.5
7
10
10
12
12.5
14.5
18.5
22.5
P1 Panel cut-out (page 153)
P21 PCB drilling pattern (page 159)
E maxi
Note: this contact type is available for all E●● socket models.
See page 159 for table of available types.
Length «L» depends on the number of contacts, see PCB drilling pattern on page 159.
The 3E series is delivered with a conical nut.
L
EEP Fixed socket, nut fixing, with elbow (90°)
contacts for printed circuit
(back panel mounting)
N
P
S1
M
Dimensions (mm)
E maxi
øA
e
20 mini
øB
Reference
Model
Series
EEP
EEP
1E
2E
A
B
e
E
M
N
P
S1
20 20 M16x1.0 6.5 3.5 21.5 10 14.5
25 25 M20x1.0 6.5 3.5 24.0 10 18.5
P1 Panel cut-out (page 153)
P24 PCB drilling pattern (page 160)
2
www.lemo.com
Note: this contact type is available for all back panel mounting socket types. See page
160 for available types.
Length «L» depends on the number of contacts, see PCB drilling pattern on page 160.
79
®
®
EHP Fixed socket, nut fixing, protruding shell
L maxi
S4
M
Dimensions (mm)
øA
e
øB
Reference
S 3 E maxi
S1
Model
Series
EHP
EHP
EHP
0E
1E
2E
A
B
e
E
L
L1)
M
S1 S3 S4
18 19.2 M14x1.0 1.5 19.5 20.5 10.5 12.5 17 15
20 21.5 M16x1.0 1.5 24.0 25.3 15.5 14.5 19 17
25 27.0 M20x1.0 1.5 28.5 30.0 17.0 18.5 24 20
P1 Panel cut-out (page 153)
Note: 1) unipole model
PCA Free socket, cable collet
Reference
Model
PCA
PCA
PCA
PCA
PCA
PCA
PHG1)
øA
~L
S2
Series
0E
1E
2E
3E
4E
5E
6E
Dimensions (mm)
A
L
13
34.0
15
45.0
19
54.0
23
65.0
29
75.5
42
95.0
52 125.0
S2
8
9
12
15
19
32
38
M1
Cable assembly
(pages 167 and 168)
Note: 1) with key (G)
PCA Free socket with oversize cable collet 1)
Reference
øB
øA
~L
S2
Dimensions (mm)
Model
Series
A
PCA
PCA
PCA
PCA
1E
2E
3E
4E
15
19
23
29
B
L
14.5 58.0
17.0 67.0
22.0 84.0
36.0 109.0
S1
S2
12
15
19
30
12
15
19
32
M2 Cable assembly (pages 167 and 169)
Note: 1) correspond to K type of collet, the fitting of oversize collets onto this
model allows them to be fitted to the cables that can be accommodated by
the next housing size up (see page 105).
S1
PCA Free socket, cable collet
and nut for fitting a bend relief 1)
Reference
øA
~L
Dimensions (mm)
Model
Series
A
L
S2
PCA
PCA
PCA
PCA
PCA
0E
1E
2E
3E
4E
13
15
19
23
29
34.0
45.0
54.0
64.0
75.5
7
9
12
15
19
M1
Cable assembly
(pages 167 and 168)
S2
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
80
www.lemo.com
®
®
PCP Free socket, cable collet
and inner anti-rotating device
Reference
Dimensions (mm)
Model
Series
A
L
S2
PCP
PCP
3E
4E
23
29
65.0
75.5
15
19
øA
~L
M1 Cable assembly (pages 167 and 168)
S2
PSA Fixed socket, nut fixing, cable collet
Dimensions (mm)
Reference
Model
L maxi
øA
M
e
øB
S3
PSA
PSA
PSA
PSA
PSA
PSA
PKG1)
Series
A
B
e
0E
1E
2E
3E
4E
5E
6E
18
20
25
31
37
51
65
19.2
21.5
27.0
34.0
40.5
54.0
65.0
E
L
M
M14x1.0 5.5 34.0 4.0
M16x1.0 9.0 45.0 4.5
M20x1.0 9.0 54.0 5.0
M24x1.0 11.0 65.0 6.0
M30x1.0 9.0 75.5 6.5
M45x1.5 10.0 95.0 9.0
M55x2.0 10.5 125.0 10.0
S1 S2 S3
12.5
14.5
18.5
22.5
28.5
–
–
8
9
12
15
19
32
38
17
19
24
30
36
54
–
P1 Panel cut-out (page 153)
S2
E maxi
S1
M1 Cable assembly (pages 167 and 168)
Note: 1) with key (G).
The 5E and 6E series are delivered with a round nut.
RMA Free coupler
Reference
øA
L maxi
Dim. (mm)
Model
Series
A
L
RMA
RMA
RMA
RMA
RMA
RMA
0E
1E
2E
3E
4E
5E
14
16
20
25
30
44
30
40
44
54
57
67
Note: see page 101 for the available plug and contact configurations and
in order to ensure correct contact alignment.
www.lemo.com
81
®
®
Watertight or vacuumtight models
These socket or coupler models allow the device on which they are fitted to reach a protection index of IP 68 as per IEC 60529.
They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at
the end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance
Humidity
Temperature range (0E-1E)
Temperature range (2E-6E)
Salt spray corrosion test
Climatical category
Leakage rate (He)1)
Value
Standard
Characteristics
> 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 20° C/+100° C
- 20° C/+80° C
> 1000h
IEC 60512-6 test 11f
20/80/21
IEC 60068-1
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
0E
1E
2E
3E
4E
5E
6E
Maximum operating
pressure2)
Note: 1) only for vacuumtight models.
Value
60 bar
60 bar
40 bar
30 bar
15 bar
5 bar
5 bar
Standard
IEC 60512-7 test 14d
Note: 2) this value corresponds to the maximum allowed pressure difference for the assembled socket.
HGP Fixed socket, nut fixing, watertight or vacuumtight
Dimensions (mm)
Reference
Model
L maxi
M
HGP
HGP
HGP
HGP
HGP
HGP
HGP2)
øA
e
øB
S3
S1
E maxi
Series
A
B
e
E
L
0E
1E
2E
3E
4E
5E
6E
18
20
25
31
37
55
65
19.2
21.5
27.0
34.0
40.5
54.0
65.0
M14x1.0
M16x1.0
M20x1.0
M24x1.0
M30x1.0
M45x1.5
M55x2.0
5.5
9.0
10.5
15.5
17.5
20.0
20.5
23.5
29.5
32.5
39.5
43.0
52.0
52.0
L1)
M
22.0 4.0
28.0 4.5
28.0 5.0
38.5 6.0
44.0 6.5
76.0 9.0
– 10.0
S1
S3
12.5
14.5
18.5
22.5
28.5
42.5
52.0
17
19
24
30
36
–
–
P1 Panel cut-out (page 153)
Note: The 5E and 6E series are delivered with a round nut.
1) unipole model.
2) with key (G).
EBR Fixed socket with round flange, watertight,
protruding shell and screw fixing
N
~L
H1
øC
Reference
øA
H2
øB
~M
Dimensions (mm)
Model
Series
A
B
EBR
2E
28
15
C
H1
H2
L
L1)
M
N
2.8 11.8 20.4 32.5 28.0 19
25
P6 Panel cut-out (page 153)
Note: 1) unipole model.
This model is only available in a watertight version.
82
www.lemo.com
®
®
SWH Fixed coupler, nut fixing, watertight
or vacuumtight
Reference
Model
L
M
øA
e
øB
S3
E maxi
S1
SWH
SWH
SWH
SWH
SWH
SWH
SWH1)
Dimensions (mm)
Series
A
B
e
E
0E
1E
2E
3E
4E
5E
6E
18
20
25
31
37
55
65
19.2
21.5
27.0
34.0
40.5
54.0
65.0
M14x1.0
M16x1.0
M20x1.0
M24x1.0
M30x1.0
M45x1.5
M55x2.0
22.5
30.5
28.0
33.0
44.5
47.0
12.0
L
M
36.0 4.0
47.0 4.5
52.4 5.0
64.2 6.0
70.0 6.5
81.0 9.0
76.0 10.0
S1
S3
12.5
14.5
18.5
22.5
28.5
42.5
–
17
19
24
30
36
–
–
P1 Panel cut-out (page 153)
Note: 1) with key (G). The 5E and 6E series are delivered with a round nut.
See page 101 for the available plug and contact configurations and in
order to ensure correct contact alignment.
www.lemo.com
83
®
®
L Series
L series connectors have been specifically designed for outdoor applications. This series offer superior polarization combining
the stepped insert (half-moon) of the S/E series with the keying system of the K series.
They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,
free socket, fixed socket or coupler. All models of this series are watertight when mated to give a protection index of IP68
as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP66 otherwise).
L series connectors have the same insulators as the S series and have the following main features:
– security of the Push-Pull latching system
– watertight connection (IP 68/IP 66)
– multipole types 2 to 10 contacts
– solder, crimp or print (straight) contacts
– stepped insert (half-moon) fitted
– multiple key options to avoid cross mating
with male and female contacts
of similar connectors
– high packing density for space savings
– 360° screening for full EMC shielding
– keying system («G» key standard) for connector alignment – rugged housing for extreme working conditions.
Metal housing models (page 86)
Fixed plug
Straight plugs
FAG
FGG
Fixed sockets
EGG
Free sockets
PHG
Elbow plug
FHG
FGG
FGG
Vacuumtight model (page 89)
EEG
PHG
PHG
Fixed socket
Fixed socket
PKG
HGG
84
www.lemo.com
®
®
Part Numbering System
Plug
FG G . 2L . 306 . C
L
A C 65
Variant: (page 107)
Cable ø: (page 106)
Collet type: (page 106)
Fixed socket
EG G . 2L . 306 . C
Y M
Model: (page 86)
Variant: (page 107)
Alignment key: (page 90)
Contact: (page 99)
Series: (page 86)
Insulator: (page 99)
Insert configuration: (page 92)
Housing: (page 99)
Part Number Example
Straight plug with cable collet:
FGG.2L.306.CLAC65 = straight plug with key (G) and cable collet, 2L series, multipole type with 6 contacts, outer shell in
chrome-plated brass, PEEK insulator, with 3 male and 3 female solder contacts, C type collet for 6.5 mm diameter cable.
Fixed socket:
EGG.2L.306.CYM = fixed socket, nut fixing, with key (G), 2L series, multipole type with 6 contacts, outer shell in chromeplated brass, PEEK extended insulator, with 3 female and 3 male crimp contacts.
Part Section Showing Internal Components
Straight plug
Fixed socket
1
2
3
4
5
6
7
8
outer shell
earthing crown
retaining ring
hexagonal nut
insulator
male contact
female contact
o-ring
www.lemo.com
5
2
3
8
4
1
8
7
6
9
8
2
3
7
6
1
4
10
12
13
11
5
1
2
3
4
5
6
7
8
9
10
11
12
13
outer shell
latch sleeve
inner shell
retaining ring
collet nut
split insert carrier
insulator
male contact
female contact
earthing cone
collet
gasket
washer
85
®
®
Metal housing models
Technical Characteristics
Electrical
Mechanical and Climatical
Characteristics
Value
Endurance
Humidity
Temperature range1)
Resistance to vibrations
Shock resistance
Salt spray corrosion test
Protection index (mated)2)
Climatical category
Standard
> 5000 cycles
IEC 60512-5 test 9a
up to 95% at 60° C
- 55° C, +200° C
10-2000 Hz, 15 g IEC 60512-4 test 6d
100 g, 6 ms
IEC 60512-4 test 6c
> 1000h
IEC 60512-6 test 11f
IP 68/IP 66
IEC 60529
50/175/21
IEC 60068-1
Characteristics
Value
at 10 MHz
at 1 GHz
Shielding
efficiency
Standard
> 95 dB
> 80 dB
IEC 60169-1-3
IEC 60169-1-3
Note:
The various tests have been carried out with FGG and EGG connector pairs,
with chrome-plated brass shell, PEEK insulator and silicone O-ring.
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 171.
1) minimum operating temperature is -20°C for sockets fitted with an FPM
(Viton®) O-ring.
2) IP68 achieved providing that the cable is perfectly circular and that
assembly process ensures a high integrity seal.
FGG Straight plug, key (G) or keys
(A to C and L), cable collet
Reference
~L
øA
~M
Dimensions (mm)
Model
Series
A
L
M
S2
FGG
FGG
FGG
0L
1L
2L
11
13
16
34
42
52
23.0
28.0
36.0
8
9
12
M1 Cable assembly (page 170)
S2
FGG Straight plug, key (G) or keys (A to C and L),
cable collet and oversize cable collet 1)
Reference
~L
øB
øA
~M
S2
Dimensions (mm)
Model
Series
A
B
L
M
S1
S2
FGG
FGG
1L
2L
13
16
14.5
17.0
60
68
46
52
12
15
12
15
M2 Cable assembly (page 170)
Note: 1) correspond to K type of collet, the fitting of oversize collets onto this
model allows them to be fitted to the cables that can be accommodated by
the next housing size up (see page 106).
S1
FGG Straight plug, key (G) or keys (A to C and L),
cable collet and nut for fitting a bend relief 1)
Reference
~L
øA
~M
S2
86
Dimensions (mm)
Model
Series
A
L
M
S2
FGG
FGG
FGG
0L
1L
2L
11
13
16
34
42
52
23
28
36
7
9
12
M1 Cable assembly (page 170)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
www.lemo.com
®
®
FAG Fixed plug, nut fixing, non-latching,
key (G) or keys (A to C and L)
L maxi
N
S3
M
øA
e
øB
Reference
Model
Series
FAG
2L
Dimensions (mm)
A
B
e
E
L
N1)
M
S1 S3
25 27.0 M20x1.0 4.5 28.2 18.0 28.3 18.5 24
P1 Panel cut-out (page 153)
S1
E maxi
Note: 1) maximum length with crimp contacts.
FHG Elbow (90°) plug, key (G)
or keys (A to C and L), cable collet
~L
S1
~M
Dimensions (mm)
~H
øA
Reference
S3
S2
Model
Series
FHG
FHG
FHG
0L
1L
2L
A
D
11.5 7.6
14.0 8.8
17.5 10.5
H
L
M
S1
S2
S3
27
33
40
36
43
51
25.0
29.0
35.0
10
12
15
8
9
12
8
10
13
M3 Cable assembly (page 170)
D
EGG Fixed socket, nut fixing, key (G)
or keys (A to C and L)
L maxi
N
S3
M
øA
e
øB
Reference
E maxi
Model
Series
EGG
EGG
EGG
0L
1L
2L
Dimensions (mm)
A
B
e
E
18 19.2 M14x1.0
20 21.5 M16x1.0
25 27.0 M20x1.0
6
9
9
L
M
N1)
S1 S3
21.7 4.0 20.1 12.5 17
27.0 4.5 25.1 14.5 19
30.7 5.0 28.6 18.5 24
S1
P1 Panel cut-out (page 153)
Note: 1) maximum length with crimp contacts.
EEG Fixed socket, nut fixing, key (G)
or keys (A to C and L)
(back panel mounting)
L maxi
N
P
Reference
E maxi
øA
M
e
øB
S1
Model
Series
EEG
EEG
EEG
0L
1L
2L
Dimensions (mm)
A
B
e
E
L
M N1)
P
S1
18.0 18 M14x1.0 3.4 21.7 3.5 20.1 7.0 12.5
20.0 20 M16x1.0 6.2 27.0 3.5 25.1 10.0 14.5
25.0 25 M20x1.0 5.0 30.7 3.5 28.6 10.0 18.5
P1 Panel cut-out (page 153)
Note: 1) maximum length with crimp contacts.
www.lemo.com
87
®
®
PHG Free socket, key (G) or keys (A to C and L),
cable collet
Reference
øA
~L
Dimensions (mm)
Model
Series
A
L
S2
PHG
PHG
PHG
0L
1L
2L
13
15
19
34.0
45.0
54.0
8
9
12
M1 Cable assembly (page 170)
S2
PHG Free socket, key (G) or keys (A to C and L),
cable collet and oversize cable collet 1)
Dimensions (mm)
Reference
øB
øA
~L
Model
Series
A
B
L
S1
S2
PHG
PHG
1L
2L
15
19
14.5
17.0
63
70
12
15
12
15
M2 Cable assembly (page 170)
S1
S2
Note: 1) correspond to K type of collet, the fitting of oversize collets onto this
model allows them to be fitted to the cables that can be accommodated by
the next housing size up (see page 106).
PHG Free socket, key (G) or keys (A to C and L),
cable collet and nut for fitting a bend relief 1)
Reference
Dimensions (mm)
Model
Series
A
L
S2
PHG
PHG
PHG
0L
1L
2L
13
15
19
34.0
45.0
54.0
7
9
12
øA
~L
M1 Cable assembly (page 170)
S2
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
PKG Fixed socket, nut fixing, key (G)
or keys (A to C and L), cable collet
øA
M
e
øB
S3
Dimensions (mm)
Reference
~L
Model
Series
PKG
PKG
PKG
0L
1L
2L
A
B
e
18 19.2 M14x1.0
20 21.5 M16x1.0
25 27.0 M20x1.0
E
6
9
9
L
M
S1
S2
S3
34.0 4.0 12.5 8
45.0 4.5 14.5 9
54.0 5.0 18.5 12
17
19
24
M1 Cable assembly (page 170)
S2
88
E maxi
S1
P1 Panel cut-out (page 153)
www.lemo.com
®
®
Watertight or vacuumtight models
This socket model allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529.
This model is also available in a vacuumtight version. It is identified by the letter «PV» at the end of the part number (certificate on request).
Epoxy resin is used to seal this model.
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance
Humidity
Temperature range (0L-1L)
Temperature range (2L)
Salt spray corrosion test
Value
Standard
Characteristics
> 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 20° C/+100° C
- 20° C/+80° C
> 1000h
IEC 60512-6 test 11f
Value
Climatical category
Leakage rate (He)
0L
1L
2L
Maximum operating
pressure1)
Standard
20/80/21
IEC 60068-1
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
60 bar
60 bar
IEC 60512-7 test 14d
40 bar
Note: 1) this value corresponds to the maximum allowed pressure difference for the assembled socket.
HGG Fixed socket, nut fixing, key (G) or keys
(A to C and L), vacuumtight
L maxi
S3
M
øA
e
øB
Reference
E maxi
Model
Series
HGG
HGG
HGG
0L
1L
2L
Dimensions (mm)
A
B
e
E
L
M
S1
S3
18 19.2 M14x1.0 5.5 21.7 4.0 12.5 17
20 21.5 M16x1.0 9.0 30.0 4.5 14.5 19
25 27.0 M20x1.0 13.0 33.7 5.0 18.5 24
S1
P1 Panel cut-out (page 153)
www.lemo.com
89
®
®
Alignment Key (L series)
Alignment Key and Polarized Keying System
L series connector model part numbers are composed of three letters. The LAST LETTER indicates the key position and the
contact type (male or female).
γ
Nb of
keys
G
A
B
J
L
1
2
2
2
2
Series
Angles
α
Reference
Front view of a socket
α
γ
Contact type
Note
0L
1L
2L
Plug
Socket
0°
30°
45°
105°
75°
0°
30°
45°
105°
75°
0°
30°
45°
105°
75°
male
male
male
female
male
female
female
female
male
female
●
●
●
●
●1)
Note: 1) that contact type is not as for the K series.
● First choice alternative
● Special order alternative
90
www.lemo.com
®
®
Insert configuration (S, E and L series)
Unipole
Contact
type
Standard
Watertight
ø A (mm)
Solder
Crimp
Test voltage (kV rms)1)
Test voltage (kV dc)1)
Rated current (A)1)
00
113
00
–
1.3
●2)
●
0.8
1.2
8
0S
0E
116
0S
0E
1.6
●2)
–
1.5
2.1
12
1S
1E
120
1S
1E
2.0
●2)
–
1.9
2.7
18
130
1S
1E
3.0
●
–
1.5
2.1
25
130
2S
2E
3.0
●
–
2.1
3.0
30
140
2S
2E
4.0
●
–
1.7
2.4
40
140
3S
3E
4.0
●
–
2.3
3.3
43
160
3S
3E
6.0
●
–
1.7
2.4
65
140
4S
–
4.0
●
–
3.0
4.2
46
160
4S
4E
6.0
●
–
2.7
3.9
70
112
5S
5E
12.0
●
–
1.5
2.1
230
øA
Reference
Series
Male solder contacts
2S
2E
3S
3E
4S
4E
Female solder contacts
5S
5E
Note: 1) see calculation method, caution and suggested standard on page 178.
2) also available with inversed contacts: plug = female, socket = male.
www.lemo.com
91
®
®
Multipole
Contact
type
Standard
Watertight
Number of contacts
ø A (mm)
Solder
Crimp
Print (straight)
Print (elbow)
Test voltage (kV rms)1) 2)
Test voltage (kV dc)1) 2)
Rated current (A)1)
302
0S
0E
2
0.9
●
●
●
●
1.1
1.6
103)
303
0S
0E
3
0.7
●
●
●
●
1.0
1.5
73)
304
0S
0E
4
0.7
●
●
●
●
1.0
1.5
73)
306
0S
0E
6
0.5
●
●
●
●
0.9
1.3
2.5
302
1S
1E
2
1.3
●
●
●
●
1.2
1.8
153)
303
1S
1E
3
0.9
●
●
●
●
1.2
1.8
103)
304
1S
1E
4
0.9
●
●
●
●
1.2
1.8
103)
305
1S
1E
2
3
0.9
0.7
●
●
●
●
1.5
1.5
2.1
2.1
103)
73)
306
1S
1E
6
0.7
●
●
●
●
1.2
1.7
73)
302
2S
2E
2
1.6
●
●
●
●
1.7
2.4
204)
303
2S
2E
3
1.3
●
●
●
●
1.5
2.1
154)
304
2S
2E
4
1.3
●
●
●
●
1.7
2.4
154)
305
2S
2E
5
1.3
●
●
●
●
1.5
2.1
134)
306
2S
2E
6
1.3
●
●5)
●
●
1.5
2.1
12
307
2S
2E
3
4
1.3
0.9
●
●
●
●
0.8
0.8
1.2
1.2
123)
93)
308
2S
2E
8
0.9
●
●
●
●
0.8
1.2
93)
310
2S
2E
10
0.9
●
●
●
●
0.8
1.2
73)
302
3S
3E
2
2.0
●
–
●
–
3.0
4.2
23
303
3S
3E
3
2.0
●
–
●
–
1.5
2.1
20
304
3S
3E
4
2.0
●
–
●
–
1.5
2.1
18
305
3S
3E
2
3
2.0
1.3
●
–
●
–
1.5
1.5
2.1
2.1
18
14
306
3S
3E
6
1.3
●
–
●
–
2.1
3.0
14
307
3S
3E
7
1.3
●
–
●
–
1.0
1.5
12
øA
øA
Reference
Series
Male solder contacts
0S
0E
0L
Female solder contacts
1
1
2
2
2
3
2
3
1
1
2
3
1
4
1
4
2
3
2
2
1
6
3
4
1S
1E
1L
1
4
6
5
1
1
2
2
2
1
5
1
2
3
3
2
3
3
1
4
1
4
2
3
2
2
3
3
1
1
4
4
5
5
2
2
3
1
3
1
4
4
2S
2E
2L
6
6
5
2
5
1
1
2
2
1
1
2
3
3
2
3
1
4
1
4
2
3
2
1
2
3
3
1
4
4
5
5
2
2
3
1
3
1
4
4
5
3
4
6
6
3
2
2
1
5
4
1
5
5
7
7
6
3
4
6
1
6
3
4
1
2
6
7
3S
3E
5
10
8
8
7
1
1
2
2
1
6
7
4
9
1
10
6
5
8
3
2
2
9
5
4
1
8
7
3
2
2
5
1
2
3
3
2
1
1
2
3
4
4
3
2
2
3
1
3
1
4
4
5
5
2
2
3
1
3
1
4
3
4
4
5
6
6
2
2
1
3
4
1
5
5
6
7
5
7
6
Note:
1) see calculation method, caution and suggested standard on page 178.
2) lowest measured value; contact to contact or contact to shell.
3) rated current = 6A for socket with elbow (90°) contacts for printed circuit.
4) rated current = 12A for socket with elbow (90°) contacts for printed circuit.
5) only for FFL model.
92
● First choice alternative
● Special order alternative
www.lemo.com
®
®
Multipole
Contact
type
Standard
Watertight
Number of contacts
ø A (mm)
Solder
Crimp
Print (straight)
Print (elbow)
Test voltage (kV rms)1) 2)
Test voltage (kV dc)1) 2)
Rated current (A)1)
308
3S
3E
8
1.3
●
–
●
●
1.0
1.5
10
310
3S
3E
10
1.3
●
–
●
●
1.0
1.5
9
312
3S
3E
12
0.9
●
–
●
●
1.5
2.1
8
313
3S
3E
13
0.9
●
–
●
●
1.5
2.1
8
314
3S
3E
14
0.9
●
–
●
●
1.5
2.1
7
316
3S
3E
16
0.9
●
–
●
●
1.0
1.5
7
318
3S
3E
18
0.9
●
–
●
●
1.0
1.5
6
302
4S
4E
2
4.0
●
–
●
–
2.1
3.0
35
303
4S
4E
3
3.0
●
–
●
–
2.1
3.0
25
304
4S
4E
4
3.0
●
–
●
–
2.1
3.0
22
305
4S
4E
2
3
3.0
2.0
●
–
●
–
2.1
2.1
3.0
3.0
22
16
306
4S
4E
6
2.0
●
–
●
–
2.1
3.0
16
307
4S
4E
3
4
2.0
1.3
●
–
●
–
2.1
2.1
3.0
3.0
16
13
308
4S
4E
8
1.3
●
–
●
–
2.7
3.9
13
309
4S
4E
9
1.3
●
–
●
–
2.1
3.0
12
310
4S
4E
10
1.3
●
–
●
–
2.1
3.0
11
312
4S
4E
12
1.3
●
–
●
–
2.1
3.0
9
313
4S
–
13
1.3
●
–
●
–
2.1
3.0
9
øA
øA
Reference
Series
Male solder contacts
3S
3E
3
Female solder contacts
3
2
2
4
1
4
1
5
5
7
2
4
1
4
1
9
10
10
2
1
6
10
3
7
3
1
13
12
7
11
4
8
3
12
13
12
1
5
5
9
6
10
3
12
14
7
11
8
12
16
13
4
1
4
9
13
9
12
4
8
1
12
11
7
11
4
8
14
8
2
1
7
11
4
1
4
8
3
1
3
7
11
12
1
1
5
10
14
5
4
18
15
1
1
2
2
2
9
14
10
15
18
4S
4E
6
7
7
16
5
8
8
6
6
7
3
2
9
5
8
8
6
3
1
1
2
3
3
2
1
1
2
3
4
4
3
2
2
3
1
3
1
4
4
5
2
3
5
2
3
1
1
4
4
6
6
5
3
5
2
4
3
2
1
4
1
5
3
5
7
7
6
2
1
4
1
8
5
6
6
3
2
4
8
4
7
5
7
3
3
6
4
2
2
5
5
1
1
6
6
9
9
4
7
3
3
8
8
4
2
2
5
1
7
5
1
6
6
10
7
10
9
8
4
9
3
12
10
7
3
8
13
9
8
9
4
10 11
6
7
8
5
1
13
6
7
3
9
2
1
12
10
2
11 10
5
11
12
6
4
2
1
1
11
4
3
8
2
5
5
7
12
6
9
8
7
Note: 1) see calculation method, caution and suggested standard on page 178.
2) lowest measured value; contact to contact or contact to shell.
www.lemo.com
● First choice alternative
● Special order alternative
93
®
®
Multipole
Contact
type
Standard
Watertight
Number of contacts
ø A (mm)
Solder
Print (straight)
Print (elbow)
Test voltage (kV rms)1) 2)
Test voltage (kV dc)1) 2)
Rated current (A)1)
314
4S
4E
14
1.3
●
●
–
2.1
3.0
9
316
4S
4E
16
0.9
●
●
–
2.1
3.0
7
318
4S
4E
18
0.9
●
●
–
2.1
3.0
7
320
4S
4E
20
0.9
●
●
–
2.1
3.0
7
322
4S
4E
22
0.9
●
●
–
2.1
3.0
7
324
4S
4E
24
0.9
●
●
–
2.1
3.0
7
302
5S
5E
2
6.0
●
–
–
3.7
5.2
50
303
5S
5E
1
2
6.0
4.0
●
–
–
3.7
3.7
5.2
5.2
50
35
304
5S
5E
4
4.0
●
–
–
3.7
5.2
35
305
5S
5E
2
3
4.0
3.0
●
–
–
3.0
3.0
4.2
4.2
35
25
306
5S
5E
6
3.0
●
–
–
3.0
4.2
25
308
5S
5E
8
3.0
●
–
–
2.1
3.0
22
310
5S
5E
10
2.0
●
–
–
2.1
3.0
18
øA
øA
Reference
Series
Male solder contacts
4S
4E
Female solder contacts
3
3
4
12
11
13
14
1
1
6
4
9
8
1
8
1
5
12
3
5
15
1
4
2
10
18
6
3
22
17
1
21
4
24
21
12
17
18
21
22
22
5S
5E
22
7
13
13
18
20
3
8
8
17
11
16
12
4
21
6
7
17
1
2
3
7
20
7
1
20
12
16
18
17
1
11
12
15
15
16
18
14
5
11
16
3
9
3
6
11
20
4
10
6
15
8
1
4
17
24
1
1
2
2
6
7
5
10
18
5
16
5
1
10
9
1
9
14
13
12
13
4
14
8
9
13
12
4
5
9
16
11
10
10
7
4
2
2
5
2
1
1
2
3
3
2
1
1
2
3
4
4
3
2
3
2
1
3
1
4
4
5
5
2
2
3
1
3
1
4
4
6
6
5
3
2
2
4
1
5
3
4
1
5
5
8
8
6
7
7
4
6
3
3
2
2
5
1
4
5
1
6
6
10
7
8
9
10
7
9
8
Note: 1) see calculation method, caution and suggested standard on page 178.
2) lowest measured value; contact to contact or contact to shell.
94
www.lemo.com
®
®
Multipole
Contact
type
Standard
Watertight
Number of contacts
ø A (mm)
Solder
Print (straight)
Print (elbow)
Test voltage (kV rms)1) 2)
Test voltage (kV dc)1) 2)
Rated current (A)1)
312
5S
5E
12
2.0
●
–
–
2.1
3.0
18
314
5S
5E
2
12
3.0
2.0
●
–
–
1.8
1.8
2.4
2.4
20
15
316
5S
5E
16
2.0
●
–
–
1.8
2.4
15
318
5S
5E
2
16
3.0
1.6
●
–
–
1.8
1.8
2.4
2.4
18
11
320
5S
5E
20
1.6
●
–
–
1.8
2.4
11
322
5S
5E
2
20
3.0
1.6
●
–
–
1.8
1.8
2.4
2.4
16
9
324
5S
5E
24
1.6
●
–
–
2.7
3.9
9
330
5S
5E
30
1.3
●
–
–
1.8
2.4
8
336
5S
5E
36
1.3
●
–
–
1.8
2.4
7
340
5S
5E
40
1.3
●
–
–
1.2
1.8
7
344
5S
5E
44
1.3
●
–
–
1.2
1.8
6
348
5S
5E
48
1.3
●
–
–
1.2
1.8
6
øA
øA
Reference
Series
Male solder contacts
5S
5E
4
Female solder contacts
4
3
3
5
5
2
2
6
6
1
1
7
7
8
5
4
3
5
2
2
6
13
7
13
1
1
14
14
8
11
9
11
10
4
13
1
1
6
13
7
15
12
16
12
16
8
11
11
9
5
14
15
8
9
10
10
5
4
4
6
3
3
7
5
2
2
14
7
4
3
3
5
7
2
2
8
9
10
6
6
7
12
12
8
9
10
10
3
6
8
11
11
9
4
12
12
8
17
17
1
1
9
9
18
10
16
16
12
5
6
4
17
13
4
5
18
7
18
19
2
2
8
17
1
1
9
20
20
10
16
22
21
11
12
16
21
8
8
13
13
1
15
16
22
23
23
28
29
29
1
12
12
25
19
19
12
7
13
13
21
21
20
28
29
29
40
25
31
34
35
35
40
1
1
7
2
9
3
1
4
32
33
45
40
48
46
1
3
10
25
39
37
38
38
4
17
30
31
10
24
22
23
31
44
14
15
23
37
7
8
15
30
16
2
8
14
22
43
36
6
1
7
34
18
32
1
28
11
26
26
32
36
5
6
6
18
31
6
30
1
11
12
8
9
9
16
24
2
3
5
21
22
22
3
15
17
18
1
22
7
12
18
24
3
4
4
17
20
12
1
7
30
13
1
12
28
21
11
14
3
2
22
14
8
10
15
15
13
12
13
6
3
17
11
14
14
4
19
10
19
15
3
7
9
16
16
15
12
8
20
19
11
7
18
20
10
6
17
1
1
9
5
3
2
2
18
8
12
3
8
5
13
4
7
6
11
14
14
13
10
15
15
11
9
18
44
43
9
16
17
24
25
32
33
40
39
45
46
48
Note: 1) see calculation method, caution and suggested standard on page 178.
2) lowest measured value; contact to contact or contact to shell.
www.lemo.com
95
®
®
Multipole
Standard
Watertight
Number of contacts
ø A (mm)
Solder contacts
Test voltage (kV rms)1) 2)
Test voltage (kV dc)1) 2)
Rated current (A)1)
303
–
6E
3
6.0
●
3.0
4.2
50
304
6S
6E
4
8.0
●
3.0
4.2
60
6S
–
12
4.0
3.0
22
6E
12
5.0
●
2.1
–
316
–
6E
16
3.0
●
1.5
2.1
14
318
6S
–
18
4.0
●
1.2
1.8
16
320
6S
–
20
3.0
●
1.5
2.1
14
320
–
6E
20
3.0
●
1.5
2.1
14
øA
øA
Reference
Series
Male solder contacts
6S
6E
Female solder contacts
1
1
2
3
3
2
2
1
1
2
3
4
4
3
3
3
4
11
6
4
2
2
5
1
5
1
11
3
9
2
10
12
6
15
16
10
13
5
9
6
13
10
14
14
16
17
17
2
11
15
19
5
2
6
16
10
6
15
11
16
19
20
5
4
16
7
18
1
1
10
20
3
3
6
2
3
6
16
4
5
2
2
15
16
1
1
17
9
6
17
7
15
18
8
6
7
1
3
9
5
14
15
1
5
13
8
5
18
12
8
7
2
4
11
9
1
16
14
10
1
9
13
8
3
2
11
18
19
20
11
12
14
13
10
312
7
9
8
5
10
10
7
4
6
12
12
14
20
19
13
12
11
8
9
10
Note: 1) see calculation method, caution and suggested standard on page 178.
2) lowest measured value; contact to contact or contact to shell.
96
www.lemo.com
®
®
Multipole
Standard
Watertight
Number of contacts
ø A (mm)
Solder contacts
Test voltage (kV rms)1) 2)
Test voltage (kV dc)1) 2)
Rated current (A)1)
324
6S
–
24
3.0
●
1.2
1.8
12
324
–
6E
24
3.0
●
1.2
1.8
12
330
6S
6E
30
2.0
●
2.1
3.0
10
332
–
6E
32
2.0
●
1.5
2.1
10
336
6S
–
36
2.0
●
1.5
2.1
8
336
–
6E
30
6
1.3
5.0
●
1.5
1.5
2.1
2.1
4
22
340
–
6E
40
2.0
●
1.5
2.1
8
øA
øA
Reference
Series
Male solder contacts
6S
6E
3
Female solder contacts
1
1
4
7
12
17
13
21
12
18
21
5
21
1
16
24
23
16
23
13
4
5
10
10
21
16
16
26
22
9
15
21
22
26
27
27
4
1
5
24
16
17
25
24
25
28
29
29
1
3
4
12
13
13
24
19
19
29
34
5
1
6
24
29
33
34
36
1
5
11
6
12
20
30
12
21
20
21
35
35
31
34
32
18
30
30
36
12
25
25
33
7
8
8
36
3
4
18
11
32
1
7
31
33
1
1
7
20
28
34
32
6
12
7
13
13
21
21
29
35
30
36
34
33
12
40
8
9
17
28
4
5
9
6
30
1
16
32
4
5
15
8
12
1
1
30
10
22
11
14
9
9
21
15
13
8
20
24
14
12
7
17
1
15
11
6
19
18
2
17
22
5
3
2
18
20
10
24
4
3
19
9
22
4
6
8
17
22
7
7
8
13
18
24
3
4
8
20
28
34
29
35
40
Note: 1) see calculation method, caution and suggested standard on page 178.
2) lowest measured value; contact to contact or contact to shell.
www.lemo.com
97
®
®
Multipole
Standard
Watertight
Number of contacts
ø A (mm)
Solder contacts
Test voltage (kV rms)1) 2)
Test voltage (kV dc)1) 2)
Rated current (A)1)
348
6S
6E
48
2.0
●
1.5
2.1
7
360
6S
6E
60
1.6
●
1.5
2.1
5
362
–
6E
62
1.6
●
1.5
2.1
5
364
6S
6E
64
1.3
●
1.2
1.8
4
372
6S
6E
72
1.3
●
1.2
1.8
4
106
–
6E
106
0.9
●
0.8
1.2
2
106
6S
–
106
0.9
●
0.8
1.2
2
øA
øA
Reference
Series
Male solder contacts
6S
6E
3
Female solder contacts
1
1
9
9
10
10
24
17
32
25
39
33
45
16
17
24
25
32
33
40
48
3
4
4
16
39
40
45
46
46
1
6
6
1
13
7
7
21
14
30
39
31
47
21
30
22
39
31
40
40
54
13
14
22
48
60
48
47
48
55
54
55
60
1
1
7
2
2
14
8
15
22
31
40
32
31
32
40
48
49
49
61
22
23
41
41
48
14
15
23
55
7
8
55
56
56
61
62
62
5
1
1
13
14
42
33
51
43
22
32
23
33
42
43
51
52
52
64
13
14
23
32
59
59
60
60
2
1
3
26
18
36
46
37
55
47
63
17
26
27
36
37
46
47
56
55
56
63
64
64
71
2
1
10
36
47
59
80
37
48
60
60
71
89
17
26
36
47
59
70
71
81
81
80
89
90
90
98
97
98
105
1
12
41
53
42
65
54
76
66
77
87
96
104
11
20
21
31
95
103
3
12
21
86
106
4
4
30
104
105
1
11
20
9
27
27
37
48
70
106
2
10
18
18
97
104
72
1
3
3
17
106
70
71
26
3
9
18
27
70
2
3
10
10
9
64
1
9
17
72
5
6
6
22
30
31
41
42
53
54
65
66
76
77
86
87
96
95
103
104
106
Note: 1) see calculation method, caution and suggested standard on page 178.
2) lowest measured value; contact to contact or contact to shell.
98
www.lemo.com
®
®
Housings (S, E and L series)
Ref.
Outer shell and collet nut
Material
C
D
N
K
S
T
U
L
B
G
P
R
H
Latch sleeve + earthing crown
Surf. treatment
Brass
chrome
Brass
gold-plated
Brass
nickel
Brass
black chrome
Stainless steel
–
Stainless steel
–
Stainless steel
–
Aluminium alloy
anodized
POM (black)
–
PEEK (natural)
–
PSU
–
PPSU
–
PPS/brass
–/nickel
Other metallic components
Material
Surf. treatment
Material
Surf. treatment
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass/bronze
stainless steel
stainless steel
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass/bronze
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
–
–
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
brass
brass
brass
brass
brass
brass
stainless steel
brass
brass
brass
brass
brass
brass
nickel
nickel
nickel
nickel
nickel
nickel
–
nickel
nickel
nickel
nickel
nickel
nickel
Remarks
Note
Only for FFP, ERN and PCP (S series)
Only for FFP, ERN and PCP (S series)
Only for FFL (S series) 1)
Only for FFL (S series) 1)
Only for EPL and EXP (S series)
●
●
●
●
●
●
●
●
●
●
●
●
●
1)
Note: detailed characteristics of these materials and treatments are presented on page 171.
1) see «variant» for the colour.
2) in the E and L series, the latch sleeve is chrome-plated.
● First choice alternative
● Special order alternative
Insulators (S, E and L series)
Material
Ref.
L
Y
T
T
V
N
PEEK
PEEK
PTFE
FEP
PI
PA6.6
Contact type
Solder or print
Crimp
Solder
Solder
Solder
Solder
Remarks
only for unipole types
only for multipole types of the S or E series
only for multipole types of the S or E series
material for 5S/5E and 6S/6E series multipole inserts
Note
●
●
●
●
●
●
Note: detailed characteristics of these materials are presented on page 175.
● First choice alternative
● Special order alternative
Contacts (S, E and L series)
Soldering characteristics
Crimping characteristics
– no need to order specific tools, a simple soldering iron is
sufficient
– ideal for very small and fragile conductors
– contacts with solder cups to allow the solder to flow
–
–
–
–
practical, quick contact fixing outside the insulator
possible use at high temperature
need to order specific tools
no risk of heating the insulator during the conductorcontact fixing
– high tensile strength
– totally lead-free solution
Note: see page 176 for more information.
www.lemo.com
99
®
®
Contacts reference for plugs, free or fixed sockets
Reference
Contact
Contact type
Female
A
L
0.7
0.9
1.3
1.6
2.0
3.0
4.0
5.0
6.0
8.0
12.0
0.60
0.80
1.00
1.40
1.80
2.70
3.70
5.20
5.20
7.00
11.50
–
–
–
–
–
–
–
–
–
–
–
24
22
20
16
14
10
10
–
–
–
–
C
B
C
B
G
C
B
G
C
B
C
B
M
P
M
P
U
M
P
U
M
P
M
P
0.80
0.45
1.10
0.80
0.45
1.40
1.10
0.80
1.90
1.40
2.40
1.90
1
2
1
2
2
1
2
2
1
2
1
2
–
–
–
–
–
–
–
–
–
–
–
–
D
N
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 159.
●
V
V
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 160.
●
øC
øC
fig. 1
Crimp
øA
øC
øA
øC
fig. 2
øA
øC
øA
øC
Fr 1)
(N) Notes
øC
Form
(mm) per fig.
Solder
øA
Conductor
Stranded
AWG
Section (mm2)
øA
(mm)
Male
øA
Solid
AWG Section
max.
max.
(mm2)
0.7
0.9
1.3
1.6
2.0
min.
max.
min.
max.
0.25
0.34
0.50
1.00
1.50
4.00
6.00
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
26
222)
202)
18
16
12
10
8
8
4
0
–
–
–
–
–
–
–
–
–
–
–
0.14
0.34
0.50
1.00
1.50
4.00
6.00
10.00
10.00
21.00
50.00
–
–
–
–
–
–
–
–
–
–
–
–
26
32
24
26
32
20
24
26
18
22
16
18
222)
28
20
222)
28
18
20
222)
142)
18
122)
14
0.140
0.035
0.250
0.140
0.035
0.500
0.250
0.140
1.000
0.340
1.500
1.000
0.34
0.09
0.50
0.34
0.09
1.00
0.50
0.34
1.50
1.00
2.50
1.50
–
–
–
–
–
–
–
–
–
–
–
22
30
40
50
65
●
●
●
●
●
●
●
●
●
●
●
●
●
Print
L
øC
øA
øA
øC
L
Print (elbow)
øA
L
øC
Note:
1)
2)
contact retention force in the insulator (according to IEC 60512-8 test 15 a).
for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter.
Make sure that the maximum conductor diameter is smaller than ø C.
● First choice alternative
● Special order alternative
Contacts reference for coupler and plug with socket
Ref.
A
L
M
F
100
Contact type
Male - Female
Female - Male
Female - Female
Female - Female - Male
Remarks
contact configuration is explained on page 101
contact configuration is explained on page 101
contact configuration is explained on page 101
for the FTA model of the S series
www.lemo.com
®
®
Contacts reference for fixed and free couplers RMA, RAD and SWH
A
A
A
Unipole
2
1
Multipole
(odd)
1
2
Reference for plug
A
Reference for plug
Reference for plug
Unipole
Reference for plug
L
M
Female - Male
L
A
L
A
Female - Female
Reference for plug
L
Male - Female
Reference for plug
A
Unipole
1
2
Multipole
(odd)
A
2
1
3
3
3
3
2
2
2
2
3
1
4
6
Multipole
(even)
5
1
3
6
4
5
A1)
A
1
3
6
4
5
Multipole
(even)
3
1
4
6
A1)
A1)
5
Use of plugs for mating with RAD, RMA and SWH couplers
Unipole type:
Reference M for coupling two identical plugs fitted with male contact (contact reference A).
Reference L for coupling a plug fitted with male contacts (contact reference A) at the flange end for RAD and SWH and an
inverted plug fitted with female contacts (contact reference L) at the other end.
Reference A for the inverted version of code L.
Multipole type:
Reference L
for coupling a standard plug (contact reference A) at the flange end for RAD and SWH and an inverted plug
(contact reference as indicated in the above table) at the other end.
Reference M for coupling two standard plugs (contact type A).
Only available for RAD and RMA models.
Note: 1) this connector combination does not allow for contact numbering. One of the plugs has to be cable mounted in a way to ensure correct
signal continuity.
www.lemo.com
101
®
®
Collets (S, E and L series)
C, K and L type collets for S series
øA
øB
C type
Reference
øA
L type
(non EMC)
øA
øB
K type
oversize
cable collet
Collet ø
Cable ø
Reference
Collet ø
Cable ø
Notes
Type Code
00
0S
øA
øB
max.
min.
C
C
C
C
K
K
L
L
17
22
27
31
37
42
27
31
1.7
2.2
2.7
3.1
3.7
4.2
2.7
3.1
1.5
–
–
2.7
–
3.7
–
–
1.7
2.2
2.7
3.1
3.7
4.4
2.6
3.0
1.3
> 1.7
> 2.2
> 2.7
> 3.2
> 3.7
2.2
2.6
C
C
C
C
K
K
L
L
L
L
L
22
32
37
44
52
62
22
32
37
44
48
2.2
3.2
3.7
4.4
5.2
6.2
2.2
3.2
3.7
4.4
4.8
–
–
–
3.7
–
5.2
–
–
–
–
–
2.2
3.2
3.7
4.4
5.2
6.2
2.2
3.2
3.7
4.3
4.8
1.3
> 2.2
> 3.2
> 3.7
> 4.2
> 5.2
1.3
> 2.2
> 3.2
3.5
4.4
Notes
Type Code
1S
C
C
C
C
C
C
K
K
K
L
L
L
L
L
L
22
32
42
52
57
62
72
82
87
22
32
42
52
62
66
øA
øB
max.
min.
2.2
3.2
4.2
5.2
5.7
6.2
7.2
8.2
8.7
2.2
3.2
4.2
5.2
6.2
6.6
–
–
–
–
5.2
5.2
–
6.7
6.7
–
–
–
–
–
–
2.2
3.2
4.2
5.2
5.7
6.2
7.2
8.2
8.7
2.2
3.2
4.2
5.2
6.2
6.5
> 1.2
> 2.2
> 3.2
> 4.2
> 4.9
> 5.4
> 6.2
> 7.2
> 8.2
1.2
> 2.2
> 3.2
> 4.2
> 5.2
5.9
1)
1)
1)
Note:
1) these collets cannot be used for connectors models with nut for fitting a bend relief.
2) these collets are used for the FLA model.
All dimensions are in millimetres.
102
www.lemo.com
®
®
C, K and L type collets for S series
øA
øB
C type
Reference
øA
L type
(non EMC)
øA
øB
K type
oversize
cable collet
Collet ø
Cable ø
Reference
Collet ø
Cable ø
Notes
Type Code
2S
3S
øA
øB
max.
min.
C
C
C
C
C
C
C
C
K
K
L
L
L
L
L
L
L
27
32
42
52
62
72
82
87
97
11
32
42
52
62
72
82
87
2.7
3.2
4.2
5.2
6.2
7.2
8.2
8.7
9.7
10.5
3.2
4.2
5.2
6.2
7.2
8.2
8.7
–
–
–
–
–
6.7
6.7
6.7
9.0
9.0
–
–
–
–
–
–
–
2.7
3.2
4.2
5.2
6.2
7.2
8.2
8.7
9.7
10.5
3.2
4.2
5.2
6.2
7.2
8.2
8.7
1.3
> 2.5
> 3.2
> 4.2
> 5.2
> 6.2
> 7.2
> 8.2
> 8.7
> 9.5
2.5
> 3.2
> 4.2
> 5.2
> 6.2
> 7.2
> 8.2
C
C
C
C
C
C
K
K
L
L
L
L
L
L
42
57
72
87
97
11
12
13
42
57
72
87
97
11
4.2
5.7
7.2
8.7
9.7
10.5
12.2
13.2
4.2
5.7
7.2
8.7
9.7
10.7
7.7
7.7
7.7
8.7
9.0
9.0
–
12.2
–
–
–
–
–
–
4.2
5.7
7.2
8.7
9.7
10.5
12.0
13.0
4.2
5.7
7.2
8.7
9.7
10.7
2.6
4.3
5.8
7.3
8.8
9.8
11.1
12.1
2.6
> 4.2
> 5.7
> 7.2
> 8.7
> 9.7
Notes
Type Code
4S
1)
C
C
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
K
L
L
L
L
L
L
L
L
L
52
62
72
82
92
10
11
12
13
14
15
16
17
18
19
20
21
22
52
62
72
82
92
10
11
12
13
øA
øB
max.
min.
5.2
6.2
7.2
8.2
9.2
10.2
11.2
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
22.2
5.2
6.2
7.2
8.2
9.2
10.2
11.2
12.2
13.2
–
–
–
–
–
–
–
–
12.2
–
–
–
–
–
–
19.7
19.7
19.7
–
–
–
–
–
–
–
–
–
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
4.1
5.1
6.1
7.1
8.1
9.1
10.1
11.1
12.6
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
21.1
4.1
5.1
6.1
7.1
8.1
9.1
10.1
11.1
12.6
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
Note:
1) these collets cannot be used for connectors models with nut for fitting a bend relief.
All dimensions are in millimetres.
www.lemo.com
103
®
®
C, K and L type collets for S series
øA
L type
(non EMC)
Reference
Type Code
5S
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
L
L
L
L
L
L
L
L
L
L
L
L
L
72
82
92
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
92
10
11
12
13
14
15
16
17
18
19
20
21
øA
øB
K type
oversize
cable collet
øA
øB
C type
Collet ø
Cable ø
Reference
øA
øB
max.
min.
7.2
8.2
9.2
10.2
11.2
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
22.2
23.2
24.2
25.2
26.2
27.2
28.2
29.2
30.2
9.2
10.2
11.2
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
–
–
–
–
–
–
–
–
–
–
–
–
–
19.7
19.7
19.7
–
–
–
–
–
27.2
27.2
27.2
–
–
–
–
–
–
–
–
–
–
–
–
–
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
6.1
7.1
8.1
9.1
10.1
11.1
12.1
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
21.1
22.1
23.1
24.1
25.1
26.1
27.1
28.1
29.1
8.1
9.1
10.1
11.1
12.1
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
Type Code
6S
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Collet ø
Cable ø
øA
øB
max.
min.
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
22.2
23.2
24.2
25.2
26.2
27.2
28.2
29.2
30.2
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
22.2
23.2
24.2
25.2
26.2
27.2
28.2
29.2
30.2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
27.2
27.2
27.2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
11.1
12.1
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
21.1
22.1
23.1
24.1
25.1
26.1
27.1
28.1
29.1
11.1
12.1
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
21.1
22.1
23.1
24.1
25.1
26.1
27.1
28.1
29.1
Note: The 5S.112 is only available with L type of collet.
These collets cannot be used for connectors models with nut for fitting a bend relief.
All dimensions are in millimetres.
104
www.lemo.com
®
®
C and K type collets for E series
øB
K type
oversize
cable collet
Reference
Type Code
0E
1E
2E
øA
øA
øB
C type
Collet ø
Cable ø
Reference
øA
øB
max.
min.
C
C
C
C
C
C
C
C
C
10
15
20
25
30
35
40
45
50
1.6
1.6
2.1
3.1
3.1
4.2
4.2
5.2
5.2
–
–
–
–
–
4.2
4.2
5.2
5.2
1.2
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
1.0
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
1.6
2.2
3.2
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
7.2
8.2
8.2
9.2
–
–
–
–
–
–
–
–
6.2
6.2
6.7
–
8.2
8.2
8.6
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
10
11
2.2
2.2
3.2
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
7.2
8.2
8.2
9.2
9.2
10.2
10.2
11.2
–
–
–
–
–
–
–
–
–
–
–
–
8.2
8.2
8.6
–
10.2
10.2
10.6
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
8.6
9.1
9.6
10.1
Type Code
3E
4E
Collet ø
Cable ø
øA
øB
max.
min.
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
K
30
35
40
45
50
55
60
65
70
75
80
85
90
95
10
11
11
12
13
14
15
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
7.2
8.2
8.2
9.2
9.2
10.2
10.2
11.2
12.3
13.8
13.8
15.3
15.3
–
–
–
–
–
–
–
–
–
–
–
–
–
10.2
10.2
10.6
–
13.8
13.8
15.3
15.3
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
12.0
12.8
13.5
14.0
15.0
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
8.6
9.1
9.6
10.1
10.6
12.1
12.9
13.6
14.1
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
50
55
60
65
70
75
80
85
90
95
10
12
13
15
16
17
18
19
20
21
22
23
6.3
6.3
6.3
7.3
7.3
8.3
8.3
9.3
9.3
10.8
10.8
12.3
13.8
15.3
17.8
17.8
19.8
19.8
21.8
21.8
23.8
23.8
–
–
–
–
–
–
–
–
–
–
–
–
13.8
15.3
–
–
–
–
–
–
23.8
23.8
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.5
12.0
13.5
15.0
16.5
17.5
18.5
19.5
20.5
21.5
22.5
23.5
4.8
5.1
5.6
6.1
6.6
7.1
7.6
8.1
8.6
9.1
9.6
10.6
12.1
13.5
15.6
16.6
17.6
18.6
19.6
20.6
21.6
22.6
Note: All dimensions are in millimetres.
www.lemo.com
105
®
®
C and K type collets for E series
øB
K type
oversize
cable collet
Reference
Type Code
5E
C
C
C
C
C
C
C
C
C
C
C
C
C
C
10
11
12
13
14
15
16
17
18
19
20
21
22
23
øA
øB
øA
C type
Collet ø
Cable ø
Reference
øA
øB
max.
min.
11.8
11.8
13.8
13.8
15.8
15.8
17.8
17.8
19.8
19.8
21.8
21.8
23.8
23.8
–
–
–
–
–
–
–
–
–
–
–
–
23.8
23.8
10.5
11.5
12.5
13.5
14.5
15.5
16.5
17.5
18.5
19.5
20.5
21.5
22.5
23.5
9.6
10.6
11.6
12.6
13.6
14.6
15.6
16.6
17.6
18.6
19.6
20.6
21.6
22.6
Type Code
6E
C
C
C
C
C
C
C
C
C
L
14
15
16
17
18
21
22
23
27
30
Collet ø
Cable ø
øA
øB
max.
min.
14.2
15.2
15.7
16.7
18.2
23.2
23.2
23.2
27.2
30.2
–
–
–
–
–
–
–
–
–
–
14.0
15.0
15.5
16.5
18.0
21.5
22.0
23.0
27.0
30.0
13.0
14.1
14.6
15.6
17.1
20.6
21.1
22.1
26.1
29.5
Note: all dimensions are in millimetres.
C and K type collets for L series
øB
K type
oversize
cable collet
Reference
Type Code
0L
1L
106
øA
øA
øB
C type
Collet ø
Cable ø
Reference
øA
øB
max.
min.
C
C
C
C
C
C
C
C
C
10
15
20
25
30
35
40
45
50
1.6
1.6
2.1
3.1
3.1
4.2
4.2
5.2
5.2
–
–
–
–
–
4.2
4.2
5.2
5.2
1.2
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
1.0
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
1.6
2.2
3.2
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
7.2
8.2
8.2
9.2
–
–
–
–
–
–
–
–
6.2
6.2
6.7
–
8.2
8.2
8.6
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
Type Code
2L
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
10
11
Collet ø
Cable ø
øA
øB
max.
min.
2.2
2.2
3.2
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
7.2
8.2
8.2
9.2
9.2
10.2
10.2
11.2
–
–
–
–
–
–
–
–
–
–
–
–
8.2
8.2
8.6
–
10.2
10.2
10.6
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
8.6
9.1
9.6
10.1
Note: all dimensions are in millimetres.
www.lemo.com
®
®
Variant (S, E and L series)
Bend relief for S series models with collet
Bend relief for E and L series models with collet
Need to be ordered
Need to be ordered
separately
(see pages 141 and 142)
Collet
Ref.
Ref.
Collet
Need to be ordered
Type
Code
00
Z
C
K
L
17 to 31
37 to 42
27 to 31
GMA.00.0●●.D●
GMA.0B.0●●.D●
GMA.00.0●●.D●
0E
0L
0S
Z
C
K
L
32 to 44
52 to 62
32 to 48
GMA.0B.0●●.D●
GMA.1B.0●●.D●
GMA.0B.0●●.D●
1S
Z
C
K
L
32 to 62
72 to 87
32 to 66
2S
Z
C
K
L
3S
4S
Need to be ordered
separately
(see pages 141 and 142)
Type
Code
Z
C
10 to 50
GMA.0B.●●●.●●
1E
1L
Z
C
K
15 to 65
70 to 85
GMA.1B.●●●.●●
GMA.2B.●●●.●●
GMA.1B.0●●.D●
GMA.2B.0●●.D●
GMA.1B.0●●.D●
2E
2L
Z
C
K
15 to 85
90 to 10
GMA.2B.●●●.●●
GMA.3B.●●●.●●
42 to 87
97 to 11
42 to 87
GMA.2B.0●●.D●
GMA.3B.0●●.D●
GMA.2B.0●●.D●
3E
Z
C
K
30 to 10
11 to 15
GMA.3B.●●●.●●
GMA.4B.●●●.●●
57 to 97
12 to 13
57 to 97
GMA.3B.0●●.D●
GMA.4B.0●●.D●
GMA.3B.0●●.D●
4E
Z
C
50 to 15
GMA.4B.●●●.●●
Z
C
K
L
Z
C
L
82 to 13
82 to 13
GMA.4B.0●●.D●
GMA.4B.0●●.D●
Note: All dimensions are in millimetres.
Colour of connectors shell made of plastic material and aluminium alloys
Plastic shell
Reference
Colour
A
B
G
J
M
N
R
S
T
V
L
X
F
blue
white
grey
yellow
brown
black
red
orange
natural
green
black
natural
cream
PSU
PPSU
●
●
Aluminium alloys
PA.6
Anodized colour
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Reference
Watertight
Vacuumtight
S
EWB, HCP,
HGP, HGW,
SWH
P
PV
E
EBR, HGP,
SWH
P
PV
L
HGG
P
www.lemo.com
●
●
●
Watertight and vacumtight socket and coupler
models (S, E and L series)
Model
Anodized colour
for bend relief collet nut
PV
Note: other anodizing colours are available
for connectors with collet nut for bend relief.
Please consult us.
O-ring and gasket material (E and L series)
Standard connectors are delivered with silicone o-ring and
gaskets. The vacuumtight models, identified with the letter
«PV», are delivered with Viton® gaskets. Other gaskets
material can be delivered upon special request.
O-ring material
Reference
FPM (Viton®)
EPDM
FPM (Viton®) and collet nut for bend relief
H
E
D
107
®
108
®
www.lemo.com
2C SERIES
2G SERIES
®
®
2G Series
The 2G series with key (G) provides the same advantages of space saving due to its small dimensions as the 2C series and
is available in multipole type with 18 contacts.
Metal housing models (page 111)
Straight plugs
Fixed sockets
FGG
PHG
ECG
EGG
FGG
Free sockets
EYG
ECG
PHG
Part Numbering System
FGG . 2G . 318 . C
Plug
L
A D 52
Variant: (page 113)
Cable ø: (page 113)
Collet type: (page 113)
EGG . 2G . 318 . C
Fixed socket
L
L
Variant: (page 113)
Model: (page 111)
Contact: (page 113)
Series: 2G
Insulator: L = PEEK
Insert configuration: (page 112)
Housing: (page 112)
Part Number Example
Straight plug with cable collet:
FGG.2G.318.CLAD52 = straight plug with cable collet, 2G series, multipole type with 18 contacts, outer shell in chrome-plated
brass, PEEK insulator, male solder contacts, D type collet for 5.2 mm diameter cable.
Fixed socket:
EGG.2G.318.CLL = fixed socket, 2G series, multipole type with 18 contacts, outer shell in chrome-plated brass, PEEK
insulator, female solder contacts.
Part Section Showing Internal Components
Straight plug
Fixed socket
5
4
2
3
1
6
5
2
4
1
7
3
1
outer shell
2 hexagonal nut
3 locking washer
4 insulator
5 female contact
1
2
3
4
5
6
7
110
outer shell
latch sleeve
collet nut
split centre-piece
insulator
male contact
collet
www.lemo.com
Metal housing models
Technical Characteristics
®
®
Mechanical and Climatical
Endurance
Humidity
Temperature range
Salt spray corrosion test
Protection index
Climatical category
Value
Standard
> 500 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 55° C + 250° C
> 1000h
IEC 60512-6 test 11f
IP50
IEC 60529
55/175/21
IEC 60068-1
FGG.2G Straight plug, key (G), cable collet
Note:
The various tests have been carried out with FGG and EGG connector pairs,
with chrome-plated brass shell and PEEK insulator.
Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page 171.
FGG.2G Straight plug, key (G), cable collet
and nut for fitting a bend relief 1)
~30
28.4
~22
ø 14
ø 14
20.4
S 12
S 10.5
Cable assembly (page 115)
Cable assembly (page 115)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
EGG.2G Fixed socket, nut fixing, key (G)
ECG.2G Fixed socket with two nuts, key (G)
(back panel mounting)
15.6 maxi
15.6 maxi
1.8
S 13.8
5 maxi
M15 x 1
3.5
M15 x 1
ø 19.2
S 17
ø 18
ø 19.2
M15 x 1
S 17
S 13.8
4.2 maxi
Panel cut-out (page 115)
Panel cut-out (page 115)
ECG.2G Fixed socket with two nuts, key (G), straight
contact for printed circuit (back panel mounting)
EYG.2G Fixed socket, key (G), protruding shell
(screw fixing on the panel)
3
12.5
Panel cut-out (page 115)
PCB drilling pattern (page 115)
www.lemo.com
15.6 maxi
8.5
ø 14
ø 20
M13 x 0.75
3.5
M15 x 1
M15 x 1
ø 19.2
S 17
S 13.8
ø 20
Characteristics
4.2 maxi
Panel cut-out (page 115)
Note: all dimensions are in millimetres.
111
®
®
PHG.2G Free socket, key (G), cable collet
and nut for fitting a bend relief 1)
PHG.2G Free socket, key (G), cable collet
~28
ø 14
ø 14
26.4
S 12
S 10.5
Cable assembly (page 115)
Cable assembly (page 115)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
ø A (mm)
Solder
Print
Test voltage (kV rms) 2)
Test voltage (kV dc) 2)
Male solder contacts
Female solder contacts
18
0.7
●
●
0.85
1.2
2G
Note:
1)
2)
Rated current
Number of contacts
318
øA
Reference
Contact
type
(A)1)
Insert configuration (2G series)
5.5
see calculation method, caution and suggested standard on page 178.
lowest measured value; contact to contact or contact to shell.
Housings (2G series)
Ref.
C
N
K
Outer shell and collet nut
Latch sleeve
Other metallic components
Material
Surf. treatment
Material
Surf. treatment
Material
Surf. treatment
Brass
Brass
Brass
chrome
nickel
black chrome
brass/bronze
brass/bronze
brass/bronze
nickel
nickel
nickel
brass
brass
brass
nickel
nickel
nickel
Note
●
●
●
● First choice alternative
● Special order alternative
Note: detailed characteristics of these materials and treatments are presented on page 171.
112
www.lemo.com
Contacts (2G series)
®
Contact type
Ref.
A
L
N
®
Male solder
Female solder
Female print
Collets (2G series)
D type collets for 2G series
øA
øB
D type
Reference
2G
Collet ø
Type Code
D
D
D
D
52
62
72
80
Cable ø
øA
øB
max.
min.
5.2
6.2
7.2
8.0
–
–
6.2
6.2
5.1
6.1
7.1
7.9
4.5
5.5
6.5
7.5
Note: all dimensions are in millimetres.
Variant (2G series)
Bend relief for 2G series models with collet
2G
Ref.
Need to be ordered
Z
www.lemo.com
Collet
Type
Code
D
52 to 80
Need to be ordered
separately
(see pages 141 and 142)
GMA.2B.●●●.●●
113
®
®
Accessories (2G series)
BRE Blanking caps for fixed and free sockets
L
B
M
øA
Part number
N
BRE.2G.200.NAS
ø 3.5
● Body material: Nickel-plated brass (Ni 3 µm)
● Lanyard material: Stainless steel
● O-ring material: Silicone rubber or FPM
A
18
Dimensions (mm)
B
L
M
12
10.6
6.0
N
85
Note: these caps are suitable for use with any alignment key configuration.
The last letter «S» of the part number stands for the material of the O
ring (silicone rubber). O-ring’s made from FPM are also available; if required, replace the letter «S» by «V».
● Maximum operating temperature: 200°C
● Watertightness: IP61 according to IEC 60529
BRF Blanking caps for fixed sockets
L
B
M
øA
Part number
N
BRF.2G.200.NAS
sliding loop
● Body material: Nickel-plated brass (Ni 3 µm)
● Lanyard material: Stainless steel
● O-ring material: Silicone rubber or FPM
A
18
Dimensions (mm)
B
L
M
12
14.0
6.0
N
85
Note: this caps are suitable for use with any alignment key configuration.
The last letter «S» of the part number stands for the material of the O
ring (silicone rubber). O-ring’s made from FPM are also available; if required, replace the letter «S» by «V».
● Maximum operating temperature: 200°C
● Watertightness: IP61 according to IEC 60529
FFM Nut for bend relief
øA
øC
L
Part number
FFM.2C.130.LC
S2
Dimensions (mm)
A
C
L
S2
14
8
12.2
12
Note: for bend reliefs to be used with this nut see section «Accessories»
page 141.
● Material: Chrome-plated brass (0.3 µm)
Note: other accessories are also available. See section «Accessories» on page 135.
114
www.lemo.com
®
®
Tooling (2G series)
Please consult the «Tooling» section (page 146).
Panel cut-outs (2G series)
Panel cut-outs
PCB drilling pattern
EGG - ECG
EYG
22 mini
°
60
17 mini
ø 15.1 +0.1
0
15°
13.9 +0.1
0
M13 x 0.75
ø 0.6
ø 3.5
ø 6.7
30°
Note: mounting nut torque: 6 Nm (1N = 0.102 kg)
Cable assembly (2G series)
L
Connector
T
Series
S
2G
Type
318
ø contact A
(mm)
Cable stripping lengths (2G series)
0.7
Cable stripping
lengths (mm)
L
S
T
9
7
3
Note: the tolerances on these dimensions are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.
www.lemo.com
115
®
®
2C Series
In many applications, it is necessary to use multipole connectors which have shortened dimensions but require high contact
density. LEMO short series connectors, which are shorter than 30 mm, perfectly meet these needs.
The 2C series, featuring a hermaphroditic insert, is available in multipole type up to 14 contacts.
Metal housing models (page 117)
Fixed plug
Straight plugs
Fixed sockets
Free sockets
Fixed socket
Watertight or
vacuumtight models
(page 119)
Fixed sockets
FFA
FAA
PCA
ERA
PSA
ECP
ERY
HGP
FFA
ECP
HEP
PCA
EEP
Part Numbering System
FFA . 2C . 306 . C
Plug
L
A C 27
Variant: (page 121)
Cable ø: (page 121)
Collet type: (page 121)
ERA . 2C . 306 . C
Fixed socket
L
L
Variant: (page 121)
Model: (page 117)
Contact: (page 120)
Series: 2C
Insulator: L = PEEK
Insert configuration: (page 120)
Housing: (page 120)
Part Number Example
Straight plug with cable collet:
FFA.2C.306.CLAC27 = straight plug with cable collet, 2C series, multipole type with 6 contacts, outer shell in chromeplated brass, PEEK insulator, male solder contacts, C type collet for 2.7 mm diameter cable.
Fixed socket:
ERA.2C.306.CLL = fixed socket, nut fixing, 2C series, multipole type with 6 contacts, outer shell in chrome-plated brass, PEEK
insulator, female solder contacts.
Part Section Showing Internal Components
Straight plug
Fixed socket
6
4
2
3
1
5
7
6
2
5
4
1
8
3
1
1
2
3
4
5
6
outer shell
hexagonal nut
locking washer
insulator
male contact
female contact
2
3
4
5
6
7
8
116
outer shell
latch sleeve
collet nut
split centre-piece
insulator
male contact
female contact
collet
www.lemo.com
®
®
Metal housing models
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance
Humidity
Temperature range
Salt spray corrosion test
Protection index
Climatical category
Value
Standard
> 500 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 55° C + 250° C
> 1000h
IEC 60512-6 test 11f
IP50
IEC 60529
55/175/21
IEC 60068-1
FFA.2C Straight plug, cable collet
Note:
The various tests have been carried out with FFA and ERA connector pairs,
with chrome-plated brass shell and PEEK insulator.
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 171.
FFA.2C Straight plug, cable collet and nut for fitting
a bend relief 1)
~30
28.4
~22
ø 14
ø 14
20.4
S 12
S 10.5
Cable assembly (page 122)
Cable assembly (page 122)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
FAA.2C Fixed plug, nut fixing, non-latching
ERA.2C Fixed socket, nut fixing
15.6 maxi
17 maxi
S 17
ø 18
ø 19.2
ø 18
1.3 maxi
1.8
M15 x 1
9.5
M15 x 1
ø 19.2
S 17
S 13.8
S 13.8
5 maxi
Panel cut-out (page 122)
Panel cut-out (page 122)
ECP.2C Fixed socket with two nuts
(back panel mounting)
ECP.2C Fixed socket with two nuts, straight contact
for printed circuit (back panel mounting)
Panel cut-out (page 122)
12.5
4.2 maxi
S 13.5
Panel cut-out (page 122)
3.5
M15 x 1
M15 x 1
ø 19.2
S 17
ø 20
M15 x 1
M15 x 1
ø 19.2
S 13.5
3.5
ø 20
3
15.6 maxi
S 17
4.2 maxi
PCB drilling pattern (page 122)
Note: all dimensions are in millimetres.
www.lemo.com
117
®
®
ERY.2C Fixed socket, protruding shell,
(screw fixing on the panel)
EEP.2C Fixed socket, nut fixing
(back panel mounting)
15.6 maxi
S 13.5
15.6 maxi
M13 x 0.75
8.5
ø 14
ø 20
ø 19.5
M15 x 1
3.5
4.2 maxi
9.5
Panel cut-out (page 122)
Panel cut-out (page 122)
PCA.2C Free socket, cable collet
PCA.2C Free socket, cable collet
and nut for fitting a bend relief 1)
~28
ø 14
ø 14
26.4
S 12
S 10.5
Cable assembly (page 122)
Cable assembly (page 122)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
PSA.2C Fixed socket nut fixing, cable collet
~28
S 10.5 S 13.8
1.8
ø 18
M15 x 1
ø 19.2
S 17
5 maxi
Panel cut-out (page 122)
Note: all dimensions are in millimetres.
118
www.lemo.com
®
®
Watertight or vacuumtight models
These socket allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529. They are fully
compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation,
etc.
These models are identified by a letter «P» at the end of the reference.
These models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the end
of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
Endurance
Humidity
Temperature range
Salt spray corrosion test
Value
Standard
> 500 cycles
> 1000h
IEC 60512-5 test 9a
up to 95% at 60° C
- 20° C, +80° C
IEC 60512-6 test 11f
HGP.2C Fixed socket, nut fixing,
watertight or vacuumtight
Characteristics
Climatical category
Leakage rate (He)1)
Maximum operating pressure
Value
Standard
20/80/21
IEC 60068-1
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
5 bar
IEC 60512-7 test 14d
Note: 1) only for vacuumtight models.
HEP.2C Fixed socket, nut fixing, watertight
or vacuumtight (back panel mounting)
20 maxi
20 maxi
S 13.8
10.6
4
S 17
Panel cut-out (page 122)
www.lemo.com
5 maxi
3.5
M15 x 1
ø 20
ø 20
ø 19.2
M15 x 1
5.7
5.2 maxi
ø 20
Characteristics
S 13.8
Panel cut-out (page 122)
119
®
®
Insert configuration (2C series)
Number of contacts
ø A (mm)
Solder
Print
Test voltage (kV rms)1) 2)
Test voltage (kV dc)1) 2)
Rated current (A)1)
302
2
1.6
●
–
1.80
2.40
20
303
3
1.3
●
–
1.50
2.10
15
304
4
1.3
●
–
1.80
2.40
15
306
6
1.3
●
–
1.50
2.10
12
308
8
0.7
●
●
0.95
1.35
7
310
10
0.7
●
●
0.95
1.35
7
312
12
0.7
●
●
0.60
0.90
5
314
14
0.7
●
●
0.60
0.90
5
øA
øA
Reference
Contact
type
Male solder contacts
2C
2
Female solder contacts
1
1
2
2
1
1
2
3
3
1
4
2
3
2
2
3
1
3
1
4
4
6
6
5
3
4
3
4
3
2
1
9
1
8
8
7
2
7
3
1
2
3
3
7
6
10
7
11 12
1
1
3
7
4
4
8
11
8
12 14
14 12
1)
2)
7
4
12 11
7
6
10 5
6
1
6
10
11
5
8
2
9
4
1
8
7
3
2
1
6
5 10
6
5
2
5
Note:
2
3
1
4
see calculation method, caution and suggested standard on page 178.
lowest measured value; contact to contact or contact to shell.
Housings (2C series)
Ref.
C
N
K
Outer shell and collet nut
Latch sleeve
Other metallic components
Material
Surf. treatment
Material
Surf. treatment
Material
Surf. treatment
Brass
Brass
Brass
chrome
nickel
black chrome
brass/bronze
brass/bronze
brass/bronze
nickel
nickel
nickel
brass
brass
brass
nickel
nickel
nickel
Note
●
●
●
● First choice alternative
● Special order alternative
Note: detailed characteristics of these materials and treatments are presented on page 171.
Contacts (2C series)
Ref.
A
L
N
120
Contact type
Male solder
Female solder
Female print
Multipole connectors are fitted with hermaphroditic inserts including male and female
contacts. However, by convention, the letter indicating the contact type in the part number composition will be the male contact (reference A) for plugs and female contact (reference L)
for sockets.
www.lemo.com
®
®
Collets (2C series)
C and L type collets for 2C series
Collet ø
Reference
Type Code
2C
C
C
C
C
C
C
C
C
C
C
C
C
27
32
37
42
47
52
57
62
67
72
75
80
Cable ø
øA
L type
(non EMC)
øA
øB
C type
Collet ø
Reference
øA
øB
max.
min.
2.7
3.2
3.7
4.2
4.7
5.2
5.7
6.2
6.7
7.2
7.5
8.0
–
–
–
–
–
–
–
–
6.2
6.2
6.2
6.2
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.4
7.9
2.2
2.7
3.2
3.7
4.2
4.7
5.2
5.7
6.2
6.7
7.2
7.5
Note: all dimensions are in millimetres.
Type Code
2C
L
L
L
L
L
L
L
L
L
L
L
L
L
14
27
32
37
42
47
52
57
62
67
72
77
82
Cable ø
øA
øB
max.
min.
1.4
2.7
3.2
3.7
4.2
4.7
5.2
5.7
6.2
6.7
7.2
7.7
8.2
–
–
–
–
–
–
–
–
–
–
–
–
–
1.3
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
0.8
2.2
2.7
3.2
3.7
4.2
4.7
5.2
5.7
6.2
6.7
7.2
7.7
Variant (2C series)
Bend relief for 2C series models with collet
Need to be ordered
Ref.
Collet
2C
Z
Type
Code
C
L
42 to 80
42 to 82
Need to be ordered
separately
(see pages 141 and 142)
GMA.2B.0●●.D●
GMA.2B.0●●.D●
Watertight and vacumtight socket models (2C series)
Model
2C
www.lemo.com
HEP
HGP
Reference
Watertight
Vacuumtight
P
PV
121
®
®
Accessories (2C series)
Accessories for the 2C series are identical with the 2G series. Please refer to corresponding pages (page 114).
Tooling (2C series)
Please consult the «Tooling» section (page 146).
Panel cut-outs (2C series)
PCB drilling patterns
2.8
(4x) 1.5
(4x) 1.5
312
ERY
2.8
1.1
13.9
13.9
ø 0.6
1.1
HGP
PSA
310
ø 0.6
2.8
13.6
13.6
13.9
13.9
13.9
308
B
(mm)
1.1
ECP
EEP
ERA
FAA
HEP
Model
1.1
314
ø 0.6
ø 0.6
M13 x 0.75
(6x) 1
Note:
mounting nut torque:
6 Nm (1N = 0.102 kg)
2.4
2.4
1
1
1
1
2.4
17 mini
2.4
ø 15.1 +0.1
0
B +0.1
0
B
(mm)
Model
22 mini
2.8
Panel cut-outs
(6x) 1
Cable assembly (2C series)
L
Connector
T
Series
S
2C
Type
302
303/304/306
308/310/312/314
ø contact A
(mm)
Cable stripping lengths (2C series)
Cable stripping
lengths (mm)
L
S
T
1.6
1.3
0.7
11
11
11
8
8
8
3
3
3
Note: the tolerances on these dimensions are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.
122
www.lemo.com
1D SERIES (quadrax)
®
®
1D Series
1D series QUADRAX connectors have four concentric contacts insulated from the connector shell.
Specially developed for major radio and television channels, this new connector type provides the possibility of blind mating with the full security of the LEMO Push-Pull self-latching system.
Metal housing models (page 125)
Fixed plug
Straight plugs
FAA
FFA
Fixed socket
Free sockets
ERN
PCA
Bridge plug
CFF, CRF
PCA
FFA
Part Numbering System
FFA . 1D . 694 . C N
Plug
L
D 42
Variant: (page 128)
Cable ø: (page 127)
Collet type: (page 127)
ERN . 1D . 694 . C N A
Fixed socket
Variant: (page 128)
Model: (page 125)
Contact: (page 127)
Series: 1D
Insulator: N = PA6.6
Insert configuration: (page 127)
694 = quadrax
Housing: (page 127)
Part Number Example
Straight plug with cable collet:
FFA.1D.694.CNLD42 = straight plug with cable collet, 1D series, quadrax type, outer shell in chrome-plated brass, PA6.6
insulator, female solder contacts, D type collet for 4.2 mm diameter cable.
Fixed socket:
ERN.1D.694.CNA = fixed socket, 1D series, quadrax type, outer shell in chrome-plated brass, PA6.6 insulator, male
solder contacts.
Part Section Showing Internal Components
Straight plug
Fixed socket
outer shell
6 7 2
earthing crown
3 retaining ring
4 hexagonal nut
5 locking washer
6 insulator
7 printed circuit
8 male contact
9 male intermediate contact
10 female intermediate contact
1
2
124
3
4
5
1
10
9
10
8
2
8
9
8
7
6
5
1
4
10
3
1
2
3
4
5
6
7
8
9
10
outer shell
latch sleeve
collet nut
split centre-piece
insulator
printed circuit
female contact
male intermediate contact
female intermediate contact
collet
www.lemo.com
®
®
Metal housing models
Technical Characteristics
Mechanical and Climatical
Characteristics
Electrical
Value
Endurance
Temperature range1)
Salt spray corrosion test
Protection index
Characteristics
Standard
> 1000 cycles IEC 60512-5 test 9a
-40° C, +120° C
> 1000h
IEC 60512-6 test 11f
IP50
IEC 60529
Note:
1) for bridge plug: -40° C, +80° C
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 171.
Insulation resistance
Insul. res. after 48h 95%RH
at 10 MHz
Screening
efficiency
at 1 GHz
Contact resistance
Value
> 1011Ω
> 1010Ω
> 70 dB
> 35 dB
< 20mΩ
Standard
IEC 60512-2 test 3a
IEC 60512-2 test 3a
IEC 60169-1-3
IEC 60169-1-3
IEC 60512-2 test 2a
FFA Straight plug, cable collet
Part number
FFA.1D.694.CNLD42
FFA.1D.694.CNLD52
FFA.1D.694.CNLD62
FFA.1D.694.CNLD72
FFA.1D.694.CNLD76
~43
ø 12
~32
Cable assembly (page 128)
S9
S 10
FFA Straight plug, cable collet
and nut for fitting a bend relief
Part number
FFA.1D.694.CNLD42Z
FFA.1D.694.CNLD52Z
FFA.1D.694.CNLD62Z
FFA.1D.694.CNLD72Z
42
ø 12
33
S9
Cable assembly (page 128)
Note: The bend relief must be ordered separately (see page 141).
S 10
FAA Fixed plug, nut fixing, non-latching
26.5
22.5
S 14
12.5
ø 14
M 12 x 1
ø 15.8
Part number
Panel cut-out (page 128)
7 maxi
www.lemo.com
FAA.1D.694.CNL
S 10.5
125
®
®
ERN Fixed socket nut fixing, with earthing tag
21.7 maxi
19.5
S 14
1.5
ø 14
M 12 x 1
ø 15.8
Part number
ERN.1D.694.CNA
Panel cut-out (page 128)
7.5 maxi
S 10.5
CFF Bridge plug with two non-latching plugs
CRF Bridge plug with two non-latching plugs
with monitoring output
Part number
31
CFF.1D.694.PNMG
CRF.1D.694.PNFG
22
20
35
15
Note: the last letter (G) of the part number indicates the grey colour of the
housing. For other colours, replace this letter (G) by the one corresponding to the required colour.
42.5
PCA Free socket, cable collet
Part number
ø 12.5
~40
S9
PCA.1D.694.CNAD42
PCA.1D.694.CNAD52
PCA.1D.694.CNAD62
PCA.1D.694.CNAD72
PCA.1D.694.CNAD76
Cable assembly (page 128)
S 10
PCA Free socket, cable collet
and nut for fitting a bend relief
Part number
ø 12.5
39.5
PCA.1D.694.CNAD42Z
PCA.1D.694.CNAD52Z
PCA.1D.694.CNAD62Z
PCA.1D.694.CNAD72Z
Cable assembly (page 128)
S9
126
S 10
Note: The bend relief must be ordered separately (see page 141).
www.lemo.com
®
®
Reference
Number of contacts
Solder
Test voltage (kV rms)1) 2)
Test voltage (kV dc)1) 2)
Rated current (A)1)
Insert configuration (1D series)
694
4
●
0.42
0.6
0.5
Contact
type
Male solder contacts
Note:
Female solder contacts
1) see calculation method,
2) lowest measured value;
caution and suggested standard on page 178.
contact to contact or contact to shell.
Housings (1D series)
Ref.
Outer shell and collet nut
Latch sleeve + earthing crown
Other metallic components
Material
Surf. treatment
Material
Surf. treatment
Material
Surf. treatment
Brass
PA.6
chrome
–
brass/bronze
brass/bronze
nickel
nickel
brass
brass
nickel
nickel
C
P
Remarks
Only for CFF and CRF bridge plug 1)
Note
●
●
Note: detailed characteristics of these materials and treatments are presented on page 171. 1) see «variant» for the colour.
● First choice alternative
● Special order alternative
Contacts (1D series)
Contact type
Ref.
A
L
Remarks
Male solder center contact
Female solder center contact
For sockets
For plugs
Collets (1D series)
D type collets for 1D series
D type collets for 1D series
D type
D type
Reference
Cable ø
Reference
Cable ø
Notes
Type Code
1D
D
D
D
42
52
62
max.
min.
4.2
5.2
6.2
3.1
> 4.2
> 5.2
Notes
Type Code
1D
D
D
72
76
max.
min.
7.2
7.6
> 6.2
> 7.2
1)
Note: 1) these collets cannot be used for connector models with nut for fitting a bend relief. All dimensions are in millimetres.
www.lemo.com
127
®
®
Variant (1D series)
Bend relief for 1D series models with collet
Colour of the bridge plug shells
Need to be ordered
Ref.
Collet
1D
Z
Type
Code
Need to be ordered
separately
(see pages 141 and 142)
D
42 to 72
GMA.1B.●●●.●●
Reference
Colour
A
B
G
J
M
N
R
V
blue
white
grey
yellow
brown
black
red
green
Accessories and Tooling (1D series)
Accessories and tooling for the 1D series are identical with the 1B series. Please refer to corresponding pages (page 135
and 146).
Panel cut-outs (1D series)
Panel cut-out
ø 12.1 +0.1
0
20
Note: mounting nut torque: 4.5 Nm (1N = 0.102 kg)
When connectors are assembled with double panel washers or insulating
washers the mounting nut torque is 4 Nm.
10.6 +0.1
0
Cable assembly (1D series)
L
Connector
T
Series
S
1D
Type
694
ø contact A
(mm)
Cable stripping lengths (1D series)
–
Cable stripping
lengths (mm)
L
S
T
14
8
3
Note: the tolerances on these dimensions are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.
128
www.lemo.com
SPARE PARTS
®
®
Spare parts
FGG-EGG Insulators for crimp contacts
male
Type
female
Insulator part number
Male contact
Female contact
302
303
304
FGG.00.302.YL
FGG.00.303.YL
FGG.00.304.YL
EGG.00.402.YL
EGG.00.403.YL
EGG.00.404.YL
0B
0K
302
303
304
305
306
307
309
FGG.0B.302.YL
FGG.0B.303.YL
FGG.0B.304.YL
FGG.0B.305.YL
FGG.0B.306.YL
FGG.0B.307.YL
FGG.0B.309.YL
EGG.0B.402.YL
EGG.0B.403.YL
EGG.0B.404.YL
EGG.0B.405.YL
–
–
–
1B
1K
302
303
304
305
306
307
308
310
314
316
FGG.1B.302.YL
FGG.1B.303.YL
FGG.1B.304.YL
FGG.1B.305.YL
FGG.1B.306.YL
FGG.1B.307.YL
FGG.1B.308.YL
FGG.1B.310.YL
FGG.1B.314.YL
FGG.1B.316.YL
EGG.1B.402.YL
EGG.1B.403.YL
EGG.1B.404.YL
EGG.1B.405.YL
EGG.1B.406.YL
EGG.1B.407.YL
EGG.1B.408.YL
–
–
–
2B
2K
302
303
304
305
306
307
308
310
312
314
316
318
319
FGG.2B.302.YL
FGG.2B.303.YL
FGG.2B.304.YL
FGG.2B.305.YL
FGG.2B.306.YL
FGG.2B.307.YL
FGG.2B.308.YL
FGG.2B.310.YL
FGG.2B.312.YL
FGG.2B.314.YL
FGG.2B.316.YL
FGG.2B.318.YL
FGG.2B.319.YL
EGG.2B.402.YL
EGG.2B.403.YL
EGG.2B.404.YL
EGG.2B.405.YL
EGG.2B.406.YL
EGG.2B.407.YL
EGG.2B.408.YL
EGG.2B.410.YL
EGG.2B.412.YL
EGG.2B.414.YL
EGG.2B.416.YL
EGG.2B.418.YL
EGG.2B.419.YL
302
303
304
305
306
307
FGG.3B.302.YL
FGG.3B.303.YL
FGG.3B.304.YL
FGG.3B.305.YL
FGG.3B.306.YL
FGG.3B.307.YL
EGG.3B.402.YL
EGG.3B.403.YL
EGG.3B.404.YL
EGG.3B.405.YL
EGG.3B.406.YL
EGG.3B.407.YL
00
3B
3K
130
Type
Insulator part number
Male contact
Female contact
3B
3K
308
309
310
312
314
316
318
320
322
324
326
330
FGG.3B.308.YL
FGG.3B.309.ML
FGG.3B.310.YL
FGG.3B.312.YL
FGG.3B.314.YL
FGG.3B.316.YL
FGG.3B.318.YL
FGG.3B.320.YL
FGG.3B.322.YL
FGG.3B.324.YL
FGG.3B.326.YL
FGG.3B.330.YL
EGG.3B.408.YL
EGG.3B.409.ML
EGG.3B.410.YL
EGG.3B.412.YL
EGG.3B.414.YL
EGG.3B.416.YL
EGG.3B.418.YL
EGG.3B.420.YL
EGG.3B.422.YL
EGG.3B.424.YL
EGG.3B.426.YL
EGG.3B.430.YL
4B
4K
304
306
307
310
312
316
320
324
330
340
348
FGG.4B.304.YL
FGG.4B.306.YL
FGG.4B.307.YL
FGG.4B.310.YL
FGG.4B.312.YL
FGG.4B.316.YL
FGG.4B.320.YL
FGG.4B.324.YL
FGG.4B.330.YL
FGG.4B.340.YL
FGG.4B.348.YL
EGG.4B.404.YL
EGG.4B.406.YL
EGG.4B.407.YL
EGG.4B.410.YL
EGG.4B.412.YL
EGG.4B.416.YL
EGG.4B.420.YL
EGG.4B.424.YL
EGG.4B.430.YL
EGG.4B.440.YL
EGG.4B.448.YL
5B
5K
304
310
314
316
320
330
340
348
350
354
364
FGG.5B.304.ML
FGG.5B.310.YL
FGG.5B.314.YL
FGG.5B.316.YL
FGG.5B.320.YL
FGG.5B.330.YL
FGG.5B.340.YL
FGG.5B.348.YL
FGG.5B.350.ML
FGG.5B.354.YL
FGG.5B.364.YL
EGG.5B.404.ML
EGG.5B.410.YL
EGG.5B.414.YL
EGG.5B.416.YL
EGG.5B.420.YL
EGG.5B.430.YL
EGG.5B.440.YL
EGG.5B.448.YL
EGG.5B.450.ML
EGG.5B.454.YL
EGG.5B.464.YL
Note: each insulator can be used both for crimp contacts of normal shape
(fig. 1) or with reduced solder cups (fig. 2) as shown on page 131.
www.lemo.com
®
®
FGG-EGG Crimp contacts
øC
Types
øA
øC
øA
øC
Contact part number
Types
Male
Female
ø C (mm)
øA
Fig. 2
ø A (mm)
øC
ø C (mm)
øA
ø A (mm)
Fig. 1
Contact part number
Male
Female
00
302
303
304
0.5 0.45 FGG.00.554.ZZC EGG.00.654.ZZM
0.5 0.45 FGG.00.554.ZZC EGG.00.654.ZZM
0.5 0.45 FGG.00.554.ZZC EGG.00.654.ZZM
0B
0K
302/303
302/303
304/305
0.9 0.80 FGG.0B.561.ZZC EGG.0B.661.ZZM
0.9 0.45 FGG.0B.562.ZZC EGG.0B.662.ZZM
0.7 0.45 FGG.0B.556.ZZC EGG.0B.656.ZZM
0B
0K
302/303
0.9 1.10 FGG.0B.560.ZZC EGG.0B.660.ZZM
304/305
0.7 0.80 FGG.0B.555.ZZC EGG.0B.655.ZZM
306/307/309 0.5 0.45 FGG.0B.554.ZZC
–
0S
302
302
304
0.9 0.80 FGG.0B.561.ZZC EGG.0B.661.ZZM
0.9 0.45 FGG.0B.562.ZZC EGG.0B.662.ZZM
0.7 0.45 FGG.0B.556.ZZC EGG.0B.656.ZZM
0S
302
304
0.9 1.10 FGG.0B.560.ZZC EGG.0B.660.ZZM
0.7 0.80 FGG.0B.555.ZZC EGG.0B.655.ZZM
1B
1K
302/303
304/305
306/307/308
310/314/316
1.3
0.9
0.7
0.5
1B
1K
302/303
1.3 1.10 FGG.1B.566.ZZC EGG.1B.666.ZZM
304/305
0.9 0.80 FGG.1B.561.ZZC EGG.1B.661.ZZM
306/307/308 0.7 0.45 FGG.1B.556.ZZC EGG.1B.656.ZZM
1S
302
304
1.3 1.10 FGG.1B.566.ZZC EGG.1B.666.ZZM
0.9 0.80 FGG.1B.561.ZZC EGG.1B.661.ZZM
1S
302
304
1.3 1.40 FGG.1B.565.ZZC EGG.1B.665.ZZM
0.9 1.10 FGG.1B.560.ZZC EGG.1B.660.ZZM
2B
2K
2B
2K
302
303
304/305
306/307
308/310
312/314/316
318/319
2.0
1.6
1.3
1.3
0.9
0.7
0.7
302
303
304/305
306/307
304/305
306/307
308/310
308/310
312/314/316
318/319
2.0
1.6
1.3
1.3
1.3
1.3
0.9
0.9
0.7
0.7
2S
306
1.3 1.40 FGG.2B.565.ZZC EGG.2B.665.ZZM
2S
306
306
1.3 1.10 FGG.2B.566.ZZC EGG.2B.666.ZZM
1.3 0.80 FGG.2B.567.ZZC EGG.2B.667.ZZM
3B
3K
302
303/304/309
305/306/307
308/309/310
312/314
316/318
320/322/324
326/330
3.0
2.0
1.6
1.3
0.9
0.9
0.7
0.7
2.90
2.40
1.90
1.40
1.10
1.10
0.80
0.80
FGG.3B.580.ZZC
FGG.3B.575.ZZC
FGG.3B.570.ZZC
FGG.3B.565.ZZC
FGG.3B.560.ZZC
FGG.3B.560.ZZC
FGG.3B.555.ZZC
FGG.3B.555.ZZC
EGG.3B.680.ZZM
EGG.3B.675.ZZM
EGG.3B.670.ZZM
EGG.3B.665.ZZM
EGG.3B.660.ZZM
EGG.3B.660.ZZM
EGG.3B.655.ZZM
EGG.3B.655.ZZM
3B
3K
303/304/309
305/306/307
308/309/310
312/314
316/318
316/318
320/322/324
326/330
2.0
1.6
1.3
0.9
0.9
0.9
0.7
0.7
1.90
1.40
1.10
0.80
0.80
0.45
0.45
0.45
FGG.3B.576.ZZC
FGG.3B.571.ZZC
FGG.3B.566.ZZC
FGG.3B.561.ZZC
FGG.3B.561.ZZC
FGG.3B.562.ZZC
FGG.3B.556.ZZC
FGG.3B.556.ZZC
EGG.3B.676.ZZM
EGG.3B.671.ZZM
EGG.3B.666.ZZM
EGG.3B.661.ZZM
EGG.3B.661.ZZM
EGG.3B.662.ZZM
EGG.3B.656.ZZM
EGG.3B.656.ZZM
4B
4K
304
306/307
310
312
316/320
324/330
340/348
3.0
2.0
1.6
1.3
0.9
0.9
0.7
2.90
2.40
1.90
1.40
1.10
1.10
0.80
FGG.4B.580.ZZC
FGG.4B.575.ZZC
FGG.4B.570.ZZC
FGG.4B.565.ZZC
FGG.4B.560.ZZC
FGG.4B.560.ZZC
FGG.4B.555.ZZC
EGG.4B.680.ZZM
EGG.4B.675.ZZM
EGG.4B.670.ZZM
EGG.4B.665.ZZM
EGG.4B.660.ZZM
EGG.4B.660.ZZM
EGG.4B.655.ZZM
4B
4K
306/307
310
312
316/320
324/330
340/348
2.0
1.6
1.3
0.9
0.9
0.7
1.90
1.40
1.10
0.80
0.80
0.45
FGG.4B.576.ZZC
FGG.4B.571.ZZC
FGG.4B.566.ZZC
FGG.4B.561.ZZC
FGG.4B.561.ZZC
FGG.4B.556.ZZC
EGG.4B.676.ZZM
EGG.4B.671.ZZM
EGG.4B.666.ZZM
EGG.4B.661.ZZM
EGG.4B.661.ZZM
EGG.4B.656.ZZM
5B
5K
304
310
314/316
320
330/340/348
350/354/364
4.0
3.0
2.0
1.6
1.3
0.9
4.00
2.90
2.40
1.90
1.40
1.10
FGG.5B.582.ZZC
FGG.5B.580.ZZC
FGG.5B.575.ZZC
FGG.5B.570.ZZC
FGG.5B.565.ZZC
FGG.5B.560.ZZC
EGG.5B.682.ZZM
EGG.5B.680.ZZM
EGG.5B.675.ZZM
EGG.5B.670.ZZM
EGG.5B.665.ZZM
EGG.5B.660.ZZM
5B
5K
314/316
320
330/340/348
330/340/348
350/354/364
2.0
1.6
1.3
1.3
0.9
1.90
1.40
1.10
0.80
0.80
FGG.5B.576.ZZC
FGG.5B.571.ZZC
FGG.5B.566.ZZC
FGG.5B.567.ZZC
FGG.5B.561.ZZC
EGG.5B.676.ZZM
EGG.5B.671.ZZM
EGG.5B.666.ZZM
EGG.5B.667.ZZM
EGG.5B.661.ZZM
www.lemo.com
1.40
1.10
0.80
0.45
2.40
1.90
1.40
1.40
1.10
0.80
0.80
FGG.1B.565.ZZC EGG.1B.665.ZZM
FGG.1B.560.ZZC EGG.1B.660.ZZM
FGG.1B.555.ZZC EGG.1B.655.ZZM
FGG.1B.554.ZZC
–
FGG.2B.575.ZZC
FGG.2B.570.ZZC
FGG.2B.565.ZZC
FGG.2B.565.ZZC
FGG.2B.560.ZZC
FGG.2B.555.ZZC
FGG.2B.555.ZZC
EGG.2B.675.ZZM
EGG.2B.670.ZZM
EGG.2B.665.ZZM
EGG.2B.665.ZZM
EGG.2B.660.ZZM
EGG.2B.655.ZZM
EGG.2B.655.ZZM
1.90
1.40
1.10
1.10
0.80
0.80
0.80
0.45
0.45
0.45
FGG.2B.576.ZZC
FGG.2B.571.ZZC
FGG.2B.566.ZZC
FGG.2B.566.ZZC
FGG.2B.567.ZZC
FGG.2B.567.ZZC
FGG.2B.561.ZZC
FGG.2B.562.ZZC
FGG.2B.556.ZZC
FGG.2B.556.ZZC
EGG.2B.676.ZZM
EGG.2B.671.ZZM
EGG.2B.666.ZZM
EGG.2B.666.ZZM
EGG.2B.667.ZZM
EGG.2B.667.ZZM
EGG.2B.661.ZZM
EGG.2B.662.ZZM
EGG.2B.656.ZZM
EGG.2B.656.ZZM
131
®
®
GBA Locking washers
Part number
Series
øA
L
øC
● Material: Nickel-plated bronze (3 µm)
Dimensions (mm)
A
C
L
GBA.00.250.FN
GBA.0S.250.FN
00
9.5
0S-0B 12.5
7.1
9.1
1.0
1.0
GBA.1S.250.FN
1S-1B 16.0 12.1
1D
1.0
GBA.1E.250.FN
1E-1K 21.8 16.1
1.2
GBA.2S.250.FN
2S-2B 19.5 15.1
2C-2G
1.2
GBA.3S.250.FN
GBA.4S.250.FN
3S-3B 25.0 18.1
4S-4B 32.0 25.1
1.4
1.4
Note: to order this accessory separately, use the above part numbers.
GBB Tapered washers
øA
L
øC
● Material: Nickel-plated brass (3 µm)
Dimensions (mm)
A
C
L
Part number
Series
GBB.00.250.LN
GBB.0S.250.LN
GBB.1S.250.LN
00
0S-0B
1S-1B
9
11
15
7.1
9.1
12.1
2.0
2.5
3.5
GBB.2S.250.LN
2S-2B
2C-2G
18
15.1
4.0
GBB.3S.250.LN
GBB.4S.250.LN
GBB.5S.250.LN
3S-3B
4S-4B
5S-5B
22
28
40
18.1
25.2
35.2
4.5
5.0
7.5
Note: sockets of series 5B and 5S are always supplied with a tapered
washer. To order this accessory separately, use the above part numbers.
GEA Hexagonal nuts
Part number
A
L
B
e
● Material:
– Nickel-plated brass (3 µm)
– Natural anodized aluminium alloy
– Stainless steel
132
Series
A
Dimensions (mm)
B
e
L
GEA.00.240.LN
GEA.0S.240.LN
GEA.0S.241.LN
00
0S-0B
0S-0B
9
11
12
10.2 M7 x 0.50 2.0
12.4 M 9 x 0.60 2.0
13.8 M10 x 0.75 2.5
GEA.0E.240.LN
0E-0K-0L
1S-1B
17
19.2 M14 x 1.00 2.5
GEA.1S.240.LN
1S-1B-1D
14
15.8 M12 x 1.00 2.5
GEA.1E.240.LN
1E-1K-1L
2S-2B
19
21.5 M16 x 1.00 3.0
GEA.2S.240.LN
GEA.2E.240.LN
GEA.3S.240.LN
GEA.3E.240.LN
GEA.4S.240.LN
GEA.4E.240.LN
2S-2B
2E-2K-2L
3S-3B
3E-3K
4S-4B
4E-4K
17
24
22
30
30
36
19.2
27.0
25.0
34.0
34.0
40.5
M15 x 1.00
M20 x 1.00
M18 x 1.00
M24 x 1.00
M25 x 1.00
M30 x 1.00
2.7
4.0
3.0
5.0
5.0
7.0
Note: to order this part separately, use the above part numbers. The last
letters «LN» of the part number refer to the nut material and treatment. If
a nut in aluminium alloy or stainless steel is desired, replace the last letters of the part number by «PT» or «AZ» respectively.
www.lemo.com
®
®
GEG Notched nut
øA
L
e
Model
øB
Part number
Model 1
øA
L
øB
e
1
1
1
1
2
1
2
2
2
GEG.00.240.LC
GEG.0S.240.LC
GEG.0E.240.LC
GEG.1S.240.LC
GEG.1E.240.LC
GEG.1S.242.LC
GEG.2S.240.LC
GEG.2S.241.LC
GEG.2E.240.LC
A
8.6
10.5
15.8
14.0
17.5
12.1
17.5
20.5
22.5
Dimensions (mm)
B
e
L
10
12
18
16
20
14
20
24
25
M7 x 0.5
M9 x 0.6
M14 x 1.0
M12 x 1.0
M16 x 1.0
M11 x 0.5
M15 x 1.0
M19 x 1.0
M20 x 1.0
2.5
2.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
● Material: Chrome-plated brass (Ni 3 µm + Cr 0.3 µm)
Note: 00, 0B, 0S, 1B, 1S, 2B and 2S series fixed and free sockets for
back panel mounting are always delivered with this notched nut.
To order this accessory separately, use the above part numbers.
Model 2
GEC Conical nuts
Part number
A
L
øB
e
● Material: Chrome-plated brass (Ni 3 µm + Cr 0.3 µm)
Note: 3B, 3K, 3S, 3E, 4B, 4K, 4S, 4E, 5B, 5K, 5S, 5E, 6S and 6E series
fixed and free sockets for back panel mounting are always delivered with
a conical nut. To order this accessory separately, use the part numbers in
the adjacent table.
GEC.00.240.LC
GEC.0S.240.LC
GEC.0E.240.LC
GEC.1S.240.LC
GEC.1S.241.LC
GEC.1S.242.LC
GEC.2S.240.LC
GEC.2S.241.LC
GEC.2E.240.LC
GEC.3S.240.LC
GEC.3E.240.LC
GEC.4S.240.LC
GEC.4K.241.LC
GEC.5S.240.LC
A
8
10
16
13
17
12
17
20
22
20
27
27
32
37
Dimensions (mm)
B
e
L
10.0
12.0
18.0
16.0
20.0
14.0
20.0
24.0
25.0
24.0
30.0
30.0
35.5
41.0
M7 x 0.5
M9 x 0.6
M14 x 1.0
M12 x 1.0
M16 x 1.0
M11 x 0.5
M15 x 1.0
M19 x 1.0
M20 x 1.0
M18 x 1.0
M24 x 1.0
M25 x 1.0
M30 x 1.0
M35 x 1.0
2.5
2.5
3.0
3.2
4.0
3.2
3.8
5.8
5.0
4.5
4.5
4.5
5.0
5.0
GEB Round nuts
øA
L
e
Part number
Model 1
øA
e
Model 2
● Material: Nickel-plated brass (3 µm)
www.lemo.com
L
GEB.00.240.LN
GEB.0S.240.LN
GEB.0E.240.LN
GEB.1S.240.LN
GEB.1E.240.LN
GEB.2S.240.LN
GEB.2B.240.LN
GEB.3S.240.LN
GEB.4S.240.LN
GEB.5S.240.LN
GEB.5E.240.LN
GEB.6S.241.LN
GEB.6E.240.LN
Model
1
1
1
1
1
1
1
1
1
2
2
2
2
Dimensions (mm)
A
e
L
9.0
11.0
18.0
14.0
20.0
18.0
17.5
22.0
28.0
40.0
54.0
54.0
65.0
M7 x 0.50
M9 x 0.60
M14 x 1.00
M12 x 1.00
M16 x 1.00
M15 x 1.00
M15 x 0.75
M18 x 1.00
M25 x 1.00
M35 x 1.00
M45 x 1.50
M48 x 1.50
M55 x 2.00
4.0
4.0
5.0
5.0
5.0
5.5
2.5
5.5
6.0
8.0
8.0
8.0
9.0
Note: 5B, 5K, 5S, 5E, 6S and 6E series sockets are always supplied with
model 2 round nuts. To order this accessory separately, use the part numbers in the adjacent table.
133
®
134
®
www.lemo.com
TOOLING
ACCESSORIES
®
®
Accessories
BFG Plug caps
B
øA
L
Part number
Series
Dimensions (mm)
A
B
L
N
BFG.00.100 PCSG
BFG.0B.100.PCSG
00
0S-0B
7.5
9.8 10.0
9.5 12.0 12.2
60
85
BFG.1B.100.PCSG
1S-1B 12.0 15.0 13.8
1D
85
BFG.2B.100.PCSG
BFG.3B.100.PCSG
2S-2B 15.0 18.0 15.0
3S-3B 18.5 22.0 18.5
85
95
N
●
●
●
●
●
Body material: Polyoxymethylene (POM) grey (or black)
Cord material: Polyamide 6, grey (or black)
Gasket material: Silicone rubber
Maximum operating temperature: 100°C
Watertightness: IP51 according to IEC 60529
Note: this cap is available only with an alignment key (G). Upon request
this cap can be supplied in black and the last letter «G» of the part number should be replaced with «N».
Fitting the cord
Slide the plug into the loop of the cord.
Place the loop into the groove in front of the collet nut and
tighten the loop.
BFA Plug caps
B
L
N
øA
Part number
sliding loop
●
●
●
●
●
●
Body material: Nickel-plated brass (Ni 3µm)
Lanyard material: Stainless steel
Crimp ferrule material: Nickel-plated brass + polyolefin
O-ring material: Silicone rubber or FPM
Maximum operating temperature: 135°C
Watertightness: IP68 according to IEC 60529 for E series
BFA.0E.100.NAS
BFA.1E.100.NAS
BFA.2E.100.NAS
BFA.3E.100.NAS
BFA.4E.100.NAS
BFA.4S.100.NAS
BFA.5E.100.NAS
BFA.5S.100.NAS
BFA.6S.100.NAS
Series
0E
1E
2E
3E
4E
4S
5E
5S
6S
Dimensions (mm)
A
B
L
N
14.0
16.0
19.5
23.0
29.0
25.0
44.0
36.0
46.0
6
6
6
6
10
10
10
10
10
12.5
15.5
17.5
22.0
22.5
22.2
27.0
30.2
33.0
85
85
85
120
120
120
150
150
150
Note: the last letter «S» of the part number stands for the material of the Oring (silicone rubber). O-ring’s made from FPM are also available; if required,
replace the letter «S» by «V».
BFG Plug caps with key (G)
B
L
N
øA
Part number
sliding loop
●
●
●
●
●
●
Body material: Nickel-plated brass (Ni 3µm)
Lanyard material: Stainless steel
Crimp ferrule material: Nickel-plated brass + polyolefin
O-ring material: Silicone rubber or FPM
Maximum operating temperature: 135°C
Watertightness: IP68 according to IEC 60529 for E and K series
136
BFG.0K.100.NAS
BFG.1K.100.NAS
BFG.2K.100.NAS
BFG.3K.100.NAS
BFG.4B.100.NAS
BFG.4K.100.NAS
BFG.5B.100.NAS
BFG.5K.100.NAS
BFG.6E.100.NAS
Series
0K-0L
1K-1L
2K-2L
3K
4B
4K
5B
5K
6E
Dimensions (mm)
A
B
L
N
14.0
16.0
19.5
23.0
25.0
29.0
36.0
44.0
54.0
6
6
6
6
10
10
10
10
10
12.5
15.5
17.5
22.0
20.2
22.5
27.2
27.0
31.0
85
85
85
120
120
120
150
150
150
Note: this cap is available only with an alignment key (G). The last letter
«S» of the part number stands for the material of the O-ring (silicone rubber).
O-ring’s made from FPM are also available; if required, replace the letter
«S» by «V».
www.lemo.com
®
®
BHG Plug caps, nut fixing or flange
B
L
ø 3.5
N
øA
Part number
●
●
●
●
●
●
Body material: Nickel-plated brass (Ni 3µm)
Lanyard material: Stainless steel
Crimp ferrule material: Nickel-plated brass + polyolefin
O-ring material: Silicone rubber or FPM
Maximum operating temperature: 135°C
Watertightness: IP68 according to IEC 60529 for E and K series
øA
L
BHG.0K.100.NAS
BHG.1K.100.NAS
BHG.2K.100.NAS
BHG.3K.100.NAS
BHG.4B.100.NAS
BHG.4K.100.NAS
BHG.5B.100.NAS
BHG.5K.100.NAS
BHG.6E.100.NAS
Series
0K-0L
1K-1L
2K-2L
3K
4B
4K
5B
5K
6E
Dimensions (mm)
A
B
L
N
14.0
16.0
19.5
23.0
25.0
29.0
36.0
44.0
54.0
6
6
6
6
10
10
10
10
10
12.5
15.5
17.5
22.0
20.2
22.5
27.2
27.0
31.0
85
85
85
120
120
120
150
150
150
Note: this cap is available only with an alignment key (G). The last letter
«S» of the part number stands for the material of the O-ring (silicone rubber).
O-ring’s made from FPM are also available; if required, replace the letter
«S» by «V».
BFG Plug cap
Part number
BFG.3K.100.EAN
Series
3K
Dimensions (mm)
A
L
N
24
30
155
● Material: black EPDM
● Lanyard material: Stainless steel
● Crimp ferrule material: Stainless steel AISI 304 + polyolefin
N
Note: These caps are suitable for use with any alignment key configuration.
BHA Plug cap
øA
L
Part number
BHA.3K.100.EAN
3K
Dimensions (mm)
A
L
N
24
30
120
● Material: black EPDM
● Lanyard material: Stainless steel
● Crimp ferrule material: Stainless steel AISI 304 + polyolefin
ø 3.5
N
Series
Note: These caps are suitable for use with any alignment key configuration.
BRA Blanking caps for fixed sockets
and free straight sockets
L
M
ø 3.5
N
●
●
●
●
●
Body material: Polyoxymethylene (POM) grey (or black)
Cord material: Polyamide 6, grey (or black)
Gasket material: Silicone rubber
Maximum operating temperature: 100°C
Watertightness: IP61 according to IEC 60529
www.lemo.com
B
øA
Part number
Series
A
Dimensions (mm)
B
L
M
N
BRA.00.200.PCSG
BRA.0B.200.PCSG
00
7.5
9.8 9.0
0S-0B 10.0 12.5 11.0
3.5
4.8
60
60
BRA.1B.200.PCSG
1S-1B 14.0 17.0 13.5
1D
5.6
60
BRA.2B.200.PCSG
2S-2B 18.0 21.0 14.5
2C-2G
6.0
60
BRA.3B.200.PCSG
3S-3B 22.0 25.5 17.0
7.0
60
Note: these caps are suitable for use with any alignment key configuration.
On request this cap can be supplied in black. If so, replace the last letter
«G» of the part number by «N».
137
®
®
BRE Blanking caps for fixed sockets
L
B
Part number
Series
N
øA
M
ø 3.5
●
●
●
●
●
●
Body material: Nickel-plated brass (Ni 3 µm)
Lanyard material: Stainless steel
Crimp ferrule material: Nickel-plated brass + polyolefin
O-ring material: Silicone rubber or FPM
Maximum operating temperature: 135°C
Watertightness: IP61 according to IEC 60529 for S series
Dimensions (mm)
B
L
M
A
N
BRE.00.200.NAS
BRE.0S.200.NAS
00
0S-0B
8
10
7.5 8.8
9.5 10.5
3.5
4.5
60
85
BRE.1S.200.NAS
1S-1B
1D
14
11.0 12.5
5.0
85
BRE.2S.200.NAS
BRE.3S.200.NAS
BRE.4S.200.NAS
BRE.5S.200.NAS
BRE.6S.200.NAS
BRE.6E.200.NAS
2S-2B
3S-3B
4S-4B
5S-5B
6S
6E
18
22
28
40
54
57
12.0
14.0
20.0
22.0
22.0
24.0
6.0
8.0
10.0
12.0
12.0
14.0
85
120
120
150
150
150
14.0
18.0
23.0
30.0
30.0
31.5
Note: these caps are suitable for use with any alignment key configuration.
The last letter «S» of the part number stands for the O-ring material (silicone rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
BRE Blanking caps for fixed sockets
L
B
M
ø 3.5
N
øA
Part number
●
●
●
●
●
●
Body material: Nickel-plated brass (Ni 3 µm)
Lanyard material: Stainless steel
Crimp ferrule material: Nickel-plated brass + polyolefin
O-ring material: Silicone rubber or FPM
Maximum operating temperature: 135°C
Watertightness: IP68 according to IEC 60529
BRE.0K.200.NAS
BRE.1K.200.NAS
BRE.2K.200.NAS
BRE.3K.200.NAS
BRE.4K.200.NAS
BRE.5K.200.NAS
Series
A
0K-0E-0L
1K-1E-1L
2K-2E-2L
3K-3E
4K-4E
5K-5E
Dimensions (mm)
B
L
M
15.0
17.0
20.5
24.0
30.0
44.0
10
12
14
14
20
22
15.0
20.0
24.0
28.0
30.5
37.0
4
6
8
8
10
12
N
85
85
85
120
120
150
Note: these caps are suitable for use with any alignment key configuration.
The last letter «S» of the part number stands for the O-ring material (silicone rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
BRA Blanking caps for fixed sockets
L
M
øA
Part number
ø 3.3
BRA.3K.200.EAN
BRA.4K.200.EAN
Series
3K
4K
Dimensions (mm)
A
L
M
N
24
31
27
31
14.5
17.0
120
120
● Material: black EPDM
● Lanyard material: Stainless steel
● Crimp ferrule material: Stainless steel AISI 304 + polyolefin
N
Note: These caps are suitable for use with any alignment key configuration.
BRF Blanking caps for free sockets
L
øA
M
Part number
BRF.3K.200.EAN
N
138
Series
3K
Dimensions (mm)
A
L
M
N
24
27
14.5
155
● Material: black EPDM
● Lanyard material: Stainless steel
● Crimp ferrule material: Stainless steel AISI 304 + polyolefin
Note: These caps are suitable for use with any alignment key configuration.
www.lemo.com
®
®
BRD Blanking caps for free sockets
L
M
A
Dimensions (mm)
B
L
M
N
BRD.00.200.PCSG
BRD.0B.200.PCSG
00
7.5
0S-0B 10.0
9.8 9.0
12.5 11.0
3.5
4.8
85
85
BRD.1B.200.PCSG
1S-1B 14.0
1D
17.0 13.5
5.6
85
BRD.2B.200.PCSG
BRD.3B.200.PCSG
2S-2B 18.0
3S-3B 22.0
21.0 14.5
25.5 17.0
6.0
7.0
85
95
N
●
●
●
●
●
Series
B
øA
Part number
Body material: Polyoxymethylene (POM) grey (or black)
Cord material: Polyamide 6, grey (or black)
Gasket material: Silicone rubber
Maximum operating temperature: 100°C
Watertightness: IP61 according to IEC 60529
Note: on request this cap is available in black. If required, replace the
last letter «G» of the part number by «N».
Fitting the cord
Slide the socket into the loop of the cord.
Place the loop into the groove in front of the collet nut.
Tighten the loop.
BRF Blanking caps for free sockets
L
B
Part number
N
øA
M
sliding loop
●
●
●
●
●
●
Body material: Nickel-plated brass (Ni 3 µm)
Lanyard material: Stainless steel
Crimp ferrule material: Nickel-plated brass + polyolefin
O-ring material: Silicone rubber or FPM
Maximum operating temperature: 135°C
Watertightness: IP61 according to IEC 60529 for S series
Series
Dimensions (mm)
B
L
M
A
N
BRF.00.200.NAS
BRF.0S.200.NAS
00
0S-0B
8
10
7.5
8.8
9.5 10.5
3.5
4.5
85
85
BRF.1S.200.NAS
1S-1B
1D
14
11.0 12.5
5.0
85
BRF.2S.200.NAS
BRF.3S.200.NAS
BRF.4S.200.NAS
BRF.5S.200.NAS
BRF.6S.200.NAS
2S-2B
3S-3B
4S-4B
5S-5B
6S
18
22
28
40
54
12.0
14.0
20.0
22.0
22.0
14.0 6.0 85
18.0 8.0 120
23.0 10.0 120
30.0 12.0 150
30.0 12.0 150
Note: these caps are suitable for use with any alignment key configuration.
The last letter «S» of the part number stands for the O-ring material (silicone rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
BRF Blanking caps for free sockets
L
Part number
B
N
øA
M
sliding loop
● Body material: Nickel-plated brass (Ni 3 µm)
● Lanyard material: Stainless steel
● Crimp ferrule material: Nickel-plated brass + polyolefin
www.lemo.com
BRF.0K.200.NAS
BRF.1K.200.NAS
BRF.2K.200.NAS
BRF.3K.200.NAS
BRF.4K.200.NAS
BRF.5K.200.NAS
Series
0K-0E-0L
1K-1E-1L
2K-2E-2L
3K-3E
4K-4E
5K-5E
A
15.0
17.0
20.5
24.0
30.0
44.0
Dimensions (mm)
B
L
M
10
12
14
14
20
22
15.0
20.0
24.0
28.0
30.5
37.0
4
6
8
8
10
12
N
85
85
85
120
120
150
Note: these caps are suitable for use with any alignment key configuration.
The last letter «S» of the part number stands for the O-ring material (silicone rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
● O-ring material: Silicone rubber or FPM
● Maximum operating temperature: 135°C
● Watertightness: IP68 according to IEC 60529
139
®
®
BRR Spring loaded dust caps for ERA, ERN and EG●
sockets or PSA and PK● fixed sockets
Part number
øC
B
Dimensions (mm)
C E
L M
N
0S-0B 11.0 13.3 9.0 5.8 5.0 1.2 15.3
BRR.1S.200.PZVG
1S-1B 14.2 17.1 12.0 6.0 6.3 1.5 20.3
1D
BRR.2S.200.PZVG
2S-2B 18.6 22.4 15.2 6.5 8.2 2.0 26.2
2C-2G
BRR.3S.200.PZVG
3S-3B 22.5 26.5 18.2 9.0 8.8 2.5 30.8
L
B
A
BRR.0S.200.PZVG
N
øA
Series
Note: On request, this cap is available in black, blue or white. If so replace
the last letter «G» of the part number by «N», «A» or «B».
●
●
●
●
●
●
M
E maxi
Body material: PSU
Gasket material: FKM
Spring material: Stainless steel
Axes material: Nickel-plated brass
Maximum operating temperature: 100°C
Watertightness: IP61 according to IEC 60529
BRR Spring loaded dust cap for ED● and EB●
fixed sockets
Part number
Series
BRR.3K.200.PZSG
3K
L
øA
N
A
Dimensions (mm)
B
C
L
M
29
29
23
8.1
3
N
33.2
øC
B
Note: Use Allen key (0.9 mm flat) to secure cap on connector.
M
140
●
●
●
●
●
●
●
Cap material: Polyoxymethylene (POM) grey
Body material: Nickel-plated brass
Gasket material: Silicone rubber
Spring material: Stainless steel
Axes material: Nickel-plated brass
Maximum operating temperature: 100°C
Watertightness: IP61 according to IEC 60529
www.lemo.com
®
®
GM● Bend relief (Polyurethane)
A bend relief made from thermoplastic polyurethane elastomer (Desmopan 786) can be fitted over LEMO plugs and
sockets that are supplied with nut for fitting such bend relief.
They are available in nine different colours that match with
the GRA insulating washers (see page 144).
Use the part numbers shown below to order this accessory separately.
øA
L
Main characteristics
● Material: Polyurethane elastomer
● Temperature range in dry atmosphere:
Part number
Dimensions (mm)
Bend relief
Cable ø
A
L max. min.
-40°C +80°C
Series
GMA.00.012.DG
GMA.00.018.DG
GMB.00.025.DG
GMB.00.028.DG
GMB.00.032.DG
GMD.00.025.DG
GMD.00.028.DG
GMD.00.032.DG
1.2
1.8
2.5
2.8
3.2
2.5
2.8
3.2
22
22
22
22
22
22
22
22
1.4
2.1
2.8
3.1
3.5
2.8
3.1
3.5
1.1
1.8
2.5
2.8
3.2
2.5
2.8
3.2
00
GMA.0B.025.DG
GMA.0B.030.DG
GMA.0B.035.DG
GMA.0B.040.DG
GMA.0B.045.DG
2.5
3.0
24
24
2.9
3.4
2.5
3.0
0B
3.5
4.0
4.5
24
24
24
3.9
4.4
5.2
3.5
4.0
4.5
0S
GMA.1B.025.DG
GMA.1B.030.DG
GMA.1B.035.DG
GMA.1B.040.DG
GMA.1B.045.DG
GMA.1B.054.DG
GMA.1B.065.DG
2.5
3.0
3.5
4.0
4.5
5.4
6.5
30
30
30
30
30
30
30
2.9
3.4
3.9
4.4
4.9
6.0
7.0
2.5
3.0
3.5
4.0
4.5
5.4
6.5
0E-0K-0L
1B-1D
Part number
Dimensions (mm)
Bend relief
Cable ø
A
L max. min.
GMA.2B.040.DG
GMA.2B.045.DG
GMA.2B.050.DG
GMA.2B.060.DG
GMA.2B.070.DG
GMA.2B.080.DG
4.0
4.5
5.0
6.0
7.0
7.8
36
36
36
36
36
36
4.5
5.0
5.5
6.5
7.7
8.8
4.0
4.5
5.0
6.0
7.0
7.8
GMA.3B.050.DG
GMA.3B.060.DG
GMA.3B.070.DG
GMA.3B.080.DG
GMA.3B.090.DG
4.5
6.0
7.0
8.0
9.0
42
42
42
42
42
5.2
6.9
7.9
8.9
10.0
4.5
6.0
7.0
8.0
9.0
GMA.4B.080.DG
GMA.4B.010.DG
GMA.4B.011.DG
GMA.4B.012.DG
GMA.4B.013.DG
8.0
10.0
11.0
12.0
13.5
60
60
60
60
60
9.0
10.9
11.9
13.0
14.5
8.0
10.0
11.0
12.0
13.5
Series
2B
2S
2E-2K-2L
2C-2G
3S
3B
3E-3K
4S
4S
4B
4E-4K
1S
1E-1K-1L
Note: The «GMD» are thin bend reliefs (for very flexible cables).
The last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page 142 and
replace the letter «G» by the letter of the required colour.
See also detailed information for each series: B series on page 54: K series on page 54; S series on page 107; E series on page 107.
www.lemo.com
141
®
®
GMA Bend relief (Silicone)
øA
L
A bend relief has been designed for connectors used in
applications at high temperature or requiring vapour sterilization.
These bend reliefs are different from previous ones as for
their material, a silicone elastomer which is noted for its
retention of flexibility over a wide temperature range. They
are available in nine colours.
Use the part numbers shown below to order this accessory separately.
Main characteristics
● Material: Silicone elastomer VMQ
● Temperature range in dry atmosphere: -60°C
● Temperature range in water steam: +140°C
Part number
Dimensions (mm)
Bend relief
Cable ø
A
L max. min.
+200°C
Series
GMA.0B.025.RG
GMA.0B.030.RG
GMA.0B.035.RG
GMA.0B.040.RG
GMA.0B.045.RG
2.5
3.0
27
27
2.9
3.4
2.5
3.0
0B
3.5
4.0
4.5
27
27
27
3.9
4.4
5.2
3.5
4.0
4.5
0S
GMA.1B.025.RG
GMA.1B.030.RG
GMA.1B.035.RG
GMA.1B.040.RG
GMA.1B.045.RG
GMA.1B.051.RG
GMA.1B.057.RG
GMA.1B.063.RG
2.5
3.0
3.5
4.0
4.5
5.1
5.7
6.3
34
34
34
34
34
34
34
34
2.9
3.4
3.9
4.4
5.0
5.6
6.2
7.0
2.5
3.0
3.5
4.0
4.5
5.1
5.7
6.3
0E-0K-0L
1B-1D
Part number
GMA.2B.040.RG
GMA.2B.045.RG
GMA.2B.051.RG
GMA.2B.057.RG
GMA.2B.063.RG
GMA.2B.071.RG
GMA.2B.080.RG
Dimensions (mm)
Bend relief
Cable ø
A
L max. min.
4.0
4.5
5.1
5.7
6.3
7.1
8.0
41
41
41
41
41
41
41
4.4
5.0
5.6
6.2
7.0
7.9
9.0
4.0
4.5
5.1
5.7
6.3
7.1
8.0
Series
2B
2S
2E-2K-2L
2C-2G
1S
1E-1K-1L
Note: the last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page
142 and replace the letter «G» by the letter of the required colour.
See also detailed information for each series: B series on page 54: K series on page 54; S series on page 107; E series on page 107.
Note: the selection of pigments, which should remain stable at high temperature, is limited by the new regulations. For
this reason, some colours will be a shade different from
those used for Desmopan bend reliefs. The selected solutions represent the best possible compromise.
142
Ref.
A
B
G
J
M
Colour
blue
white
grey
yellow
brown
Ref.
N
R
S
V
Colour
black
red
orange
green
www.lemo.com
®
®
GM● Overall bend relief for plugs and sockets
Overall bend reliefs, type GMF for plugs and GMP for sockets offer optimum protection against mechanical damage and give
a protection index of IP65 according to IEC 60529 (mated position). These bend reliefs slide easily over the connector
shell and are positioned by slightly pressing the bend relief backnut.
The special design of the bend relief for plug provides for easy use of the push-pull self-latching system.
GMF Bend relief for straight plug
øA
L
Part number
Series
Dimensions (mm)
Bend relief
Cable ø
A
L max. min.
GMF.0B.035.060EN
GMF.1B.062.072EN
GMF.2B.082.095EN
0S-0B
1S-1B
2S-2B
11.0 60.5
16.0 72.0
22.0 95.0
3.5
6.2
8.2
1.0
2.5
5.0
● Material: Elastomer rubber black colour
● Operating temperature: -30°C to +120°C
GMP Bend relief for free socket
øA
L
Part number
Series
Dimensions (mm)
Bend relief
Cable ø
A
L max. min.
GMP.0B.035.069EN
GMP.1B.062.079EN
GMP.2B.082.102EN
0S-0B
1S-1B
2S-2B
11.0 69.0 3.5
16.0 80.0 6.2
21.0 102.5 8.2
1.0
2.5
5.0
● Material: Elastomer rubber black colour
● Operating temperature: -30°C to +120°C
– The overall bend relief shall be installed over plug or free socket fitted with a nut for bend relief.
– The typical applications are shown below.
– The overall bend relief can be cut at different length depending on cable diameter.
Plug-free socket
Plug-fixed socket
Optimum protection is offered only when using
front panel mounting fixed sockets
www.lemo.com
PCA
FFA
S series
PHG
FGG
B series
ERA
FFA
S series
EGG
FGG
B series
143
®
®
GMF Bend relief with cap for plug
Part number
131
Series
For
models
4E
FFA
4K
FGG
Cut
–
A
B
C
D
E
35
GMF.4K.080.EANZ
ø 31
ø 31
ø
admissible ø (mm)
min.
max.
8.0
9.0
10.0
11.5
13.0
15.0
8.9
9.9
11.4
12.9
14.9
16.5
● Material: Black EPDM
AB C D E
160
GMP Bend relief with cap for free socket
Part number
156
Series
For
models
4E
PCA
4K
PHG
17
Cut
–
A
B
C
D
E
ø 35
ø 31
ø
GMP.4K.080.EANZ
AB C D E
admissible ø (mm)
min.
max.
8.0
9.0
10.0
11.5
13.0
15.0
8.9
9.9
11.4
12.9
14.9
16.5
● Material: Black EPDM
160
GRA Insulating washers
Sockets or plugs mounted on panels can be fitted with insulating washers. The nine colours available combined with
those for the bend reliefs makes colour coding possible.
Part number
Series
GRA.00.269.GG
GRA.0S.269.GG
GRA.1S.269.GG
GRA.2S.269.GG
GRA.3S.269.GG
GRA.4S.269.GG
00
0S-0B
1S-1B
2S-2B
3S-3B
4S-4B
Dimensions (mm)
E
L
M
S
A
B
10.0
12.0
16.0
21.1
25.0
31.9
8.8
10.8
13.8
17.9
21.8
28.7
4.5
6.0
6.5
7.3
10.3
10.5
1.8
1.8
1.8
2.3
2.2
2.5
1.0
1.0
1.0
1.3
1.2
1.5
6.4
8.3
10.6
13.6
16.7
23.6
T
8.0
9.9
12.2
16.2
20.2
27.1
Note: insulating washers for series 5B are available on request.
L
M
øA
Caution: these insulating washers can be used with fixed and free sockets
with across flat dimension S1 equivalent to the S dimension of the washer.
S
øB
Ref.
E maxi
● Material: Polyamide
● Maximum operating temperature: 90° C
144
T
A
B
G
J
M
Colour
blue
white
grey
yellow
brown
Ref.
N
R
S
V
Colour
black
red
orange
green
Note: the last letter «G» of the part number indicates the colour grey for
the insulating washer. To obtain an insulating washer of another colour,
refer to the table above and change the letter «G» of the part number to the
corresponding letter of the colour required.
For the panel cut-out, please consult chapter «Panel cut-out» on page
153.
www.lemo.com
®
®
GRC Double panel washers
Double panel washers have been designed to make the
drilling of panel holes easier for mounting fixed and free
sockets. The combination of the nine different colours of
the double panel washers and of the bend reliefs makes
colour coding possible.
Part number
GRC.0S.260.HG
GRC.1B.260.HG
Series
Dimensions (mm)
E H L M N
R
B
S
0S-0B 10.9 5 14 2.5 1.5 26.5 12.5 8.3
1S-1B 13.9 5 20 3.3 1.8 34.5 14.5 10.6
Caution: these double panel washers can be used with fixed or free sockets with across flat dimension S1 equivalent to the S dimension of the
washer.
L
R
M
S
øB
H
N
Ref.
A
B
G
J
M
Ref.
Colour
blue
white
grey
yellow
brown
N
R
S
V
Colour
black
red
orange
green
Note: the last letter «G» of the washer’s part number indicates the colour
grey. For other colours, refer to the above table and replace letter «G» by
the one corresponding to the colour required.
For the panel cut-out, please consult chapter «Panel cut-out» on page
153.
E maxi
● Material: Polyamide
● Maximum operating temperature: 90° C
GCA Earthing washer
Part number
Series
GCA.00.255.LT
GCA.0S.255.LT
GCA.0E.255.LT
GCA.1S.255.LT
GCA.1E.255.LT
GCA.2S.255.LT
GCA.2E.255.LT
GCA.3S.255.LT
GCA.4S.255.LT
GCA.4E.255.LT
GCA.5S.255.LT
00
0S-0B
0E-0K
1S-1B
1E-1K
2S-2B
2E-2K
3S-3B
4S-4B
4E-4K
5S-5B
Dimensions (mm)
A
B
L
N
øA
L
N
øB
9.5
13.0
17.0
17.0
20.0
20.0
25.0
25.0
35.0
35.0
42.0
7.1
9.1
14.1
12.2
16.2
15.2
20.2
18.2
25.6
30.6
35.1
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.3
18.2
22.0
27.5
27.5
32.0
32.0
39.0
39.0
50.0
50.0
57.5
● Material: CuSnZn plated brass (2 µm)
GSC Lead-through with cable collet
Part number
~L
øA
M
e
øB
S3
GSC.00.290.CD●●
GSC.1S.290.ND●●
GSC.3S.290.ND●●
E maxi
www.lemo.com
S1
S2
A
B
Dimensions (mm)
e
E L M
S1 S2 S3
6.5 8.1 M5x0.5 1.5 16 4.0 5
12.0 12.5 M9x0.6 5.0 26 7.5 11
17.0 19.5 M15x1.0 8.1 30 12.0 –
6 7
9 11
14 17
Note: ●● = collet cable diameter of the B series. For cable diameter refer
to page 52.
The cable collet system stands for both screened and unscreened cables.
It can be delivered with a nut for fitting a bend relief it you add a «Z» at the
end of the part number.
145
®
®
Tooling
DCG Spanners for hexagonal nuts
N
L
Part number
øB
DCG.91.149.0TN
DCG.91.161.1TN
DCG.91.201.4TN
DCG.91.231.7TN
DCG.91.282.2TN
Dimensions (mm)
B
L
N
14
16
20
23
28
40
45
52
62
76
50
52
65
68
73
Part number
of the nut
GEA.00.240.LN
GEA.0S.240.LN
GEA.1S.240.LN
GEA.2S.240.LN
GEA.3S.240.LN
● Material: blackened steel
DCA Spanners for hexagonal nuts with locator
for flats on socket thread
N
L max
Part number
DCA.91.149.0TN
DCA.91.161.1TN
DCA.91.201.4TN
DCA.91.231.7TN
DCA.91.282.2TN
Dimensions (mm)
B
L
N
14
16
20
23
28
65
73
85
100
120
50
52
65
68
73
Part number
of the nut
GEA.00.240.LN
GEA.0S.240.LN
GEA.1S.240.LN
GEA.2S.240.LN
GEA.3S.240.LN
● Material: blackened steel
øB
DCB Spanners for round nuts
N
L
Part number
øB
DCB.91.119.0TN
DCB.91.131.1TN
DCB.91.161.4TN
DCB.91.201.8TN
DCB.91.242.2TN
Dimensions (mm)
B
L
N
11
13
16
20
24
40
45
52
62
76
50
50
65
65
70
Part number
of the nut
GEB.00.240.LN
GEB.0S.240.LN
GEB.1S.240.LN
GEB.2S.240.LN
GEB.3S.240.LN
● Material: blackened steel
øA
DCH Spanners for conical nut
øB
Part number
L
DCH.91.101.PN
DCH.91.121.PN
DCH.91.161.PN
DCH.91.201.PN
Dimensions (mm)
A
B
L
N
10.1
12.1
16.1
20.1
12.8
14.8
21.0
22.8
124
124
124
129
48.3
49.3
51.9
53.5
Part number
of the nut
GEC.00.240.LC
GEC.0S.240.LC
GEC.1S.240.LC
GEC.2S.240.LC
● Material: dark grey polyurethane
N
146
www.lemo.com
®
®
DCP Flat spanners for collet nut
M
N
S1
Part number
L
DCP.99.040.TC
DCP.99.045.TC
DCP.99.050.TC
DCP.99.055.TC
DCP.99.060.TC
Dimensions (mm)
L
M
N
S1
70
70
78
78
78
0.95
2.00
2.00
2.00
2.00
10.5
10.5
12.6
12.6
12.6
4.0
4.5
5.0
5.5
6.0
● Material: chrome-plated steel
S1
DCH Spanners for notched nuts
øA
øB
Part number
L
DCH.91.101.PA
DCH.91.121.PA
DCH.91.181.PA
DCH.91.161.PA
DCH.91.201.PA
DCH.91.141.PA
DCH.91.201.PA
DCH.91.241.PA
DCH.91.251.PA
N
Dimensions (mm)
A
B
L
N
10.1
12.1
18.1
16.1
20.1
14.1
20.1
24.1
25.1
12.8
14.8
22.8
21.0
22.8
18.6
22.8
30.8
32.8
124
124
129
124
129
124
129
134
134
Part number
of the nut
48.3
49.3
53.1
51.2
53.5
51.2
53.5
52.6
55.5
GEG.00.240.LC
GEG.0S.240.LC
GEG.0E.240.LC
GEG.1S.240.LC
GEG.1E.240.LC
GEG.1S.242.LC
GEG.2S.240.LC
GEG.2S.241.LC
GEG.2E.240.LC
● Material: blue polyurethane
DCP Set of flat spanners for collet nuts
N
S1
S2
Part number
M
DCP.91.001.TN
L
DCP.91.023.TN
DCP.91.045.TN
Series
0B
1B
2B-2K
3B-3K
4B
5B
L
95
95
115
115
130
130
Dimensions (mm)
M
N
S1
2.5
2.5
3.0
3.0
3.5
3.5
21
25
30
35
40
45
8.1
10.1
13.1
15.1
21.2
31.2
S2
7.1
9.1
12.1
14.1
20.2
30.2
● Material: blackened steel
DCL Spanners for assembling plugs with 2 latches
øB
N
L
Part number
DCL.91.105.0TK
DCL.91.127.0TK
DCL.91.149.0TK
Series
00
0S
1S
Dimensions (mm)
B
L
N
10
12
14
45
47
52
13.5
17.0
19.0
● Material: blackened steel
www.lemo.com
147
®
®
DCN Spanners for assembling plugs with 3 latches
øB
N
Part number
L
DCN.91.905.0TK
DCN.91.125.0TK
DCN.91.149.0TK
DCN.91.171.2TK
DCN.91.201.5TK
Series
00
0S
1S
2S-2C
3S
Dimensions (mm)
B
L
N
9
12
14
17
20
42
47
53
63
74
12
17
19
20
22
● Material: blackened steel
DCL Assembly tool for FVB.00.303.NLA plugs
Part number
00
Dim. (mm)
A
L
5
165
øA
DCL.91.516.5TK
Series
L
DPF Pliers for assembling plugs (series K, E and L)
Part number
øA
DPF.91.001.TA
DPF.91.023.TA
Series
0E-0K-0L
1E-1K-1L
2E-2K-2L
3E-3K
Dimensions (mm)
A
B
10
–
15
–
–
12
–
18
øB
220
Example for use
The plug end must be held in the pliers whilst the nut is
tightened with the flat spanner.
Spanner
Pliers DPF
DTA Taps
Part number
DTA.99.700.5Z
DTA.99.900.6Z
148
Series
00
0S-0B
Thread
M7 x 0.5
M9 x 0.6
www.lemo.com
®
®
Crimping tools for electrical contacts
Manual crimping tools
Fig. A
Part number
Supplier
contact ø 0.5-0.7
0.9-1.3 (Fig. A)
DPC.91.701.V1)
MH8601)
6163361)
LEMO
DANIELS
ASTRO
Fig. B
1)
2)
contact ø 1.6-2.0
(Fig. B)
DPC.91.101.A2)
AF82)
6157082)
contact ø 3.0-4.0
(Fig. B)
DPC.91.102.V
M300BT
–
According to specification MIL-C-22520/7-01.
According to specification MIL-C-22520/1-01.
Pneumatic crimping tools
Part number
Supplier
DPC.91.701.C
85230
621101
LEMO
BALMAR
BUCHANAN
According to specification
MIL-C-22520/7-01.
For LEMO contacts ø 0.5-0.7-0.9-1.3 mm
DCE Positioners for crimp contacts ø 0.5-0.7-0.9 and 1.3 mm
For female
contact
female
These positioners are suitable for use with both manual and
pneumatic crimping tools according to the MIL-C-22520/7-01
standard.
Fig. 1
øA
øA
Fig. 2
øA
øA
øC
øC
00
0.5 0.45 1
28-30-32
DCE.91.050.0VC
DCE.91.050.0VM
0B
0K
0S
0.9
0.9
0.9
0.7
0.7
1
2
2
1
2
20-22-24
22-24-26
28-30-32
22-24-26
28-30-32
DCE.91.090.BVC
DCE.91.090.BVM
DCE.91.090.AVC
DCE.91.090.AVM
DCE.91.070.BVC
DCE.91.070.BVM
306/307 0.5 0.45 1
309
28-30-32
DCE.91.050.BVC
DCE.91.050.BVM
1B
1K
1S
1.3
1.3
0.9
3041)
305
0.9
306/307 0.7
308
0.7
1
2
1
2
1
2
18-20
20-22-24
20-22-24
22-24-26
22-24-26
28-30-32
DCE.91.131.BVC
DCE.91.131.BVM
DCE.91.091.BVC
DCE.91.091.BVM
øC
DCE.91.071.BVC
DCE.91.071.BVM
310/314 0.5 0.45 1
316
øC
28-30-32
DCE.91.051.BVC
DCE.91.051.BVM
2B
2K
2S
304/305 1.3 1.40 1
1.3 1.10 2
3061)
307
1.3 0.80 2
0.9 1.10 1
308/310 0.9 0.80 2
0.9 0.45 2
18-20
20-22-24
22-24-26
20-22-24
22-24-26
28-30-32
DCE.91.132.BVC
DCE.91.132.BVM
DCE.91.132.CVC
DCE.91.132.CVM
Note: a wide variation of strand number and diameter combinations are quoted as being AWG, some of which do not have
a large enough cross section to guarantee a crimp as per
either MIL-C-22520/1-01 or /7-01. Our technical department is
at your disposal to study and propose a solution to all your applications.
DCE.91.092.BVC
DCE.91.092.BVM
DCE.91.092.AVC
DCE.91.092.AVM
312/314 0.7 0.80 1
316/318
0.7 0.45 2
319
22-24-26
DCE.91.072.BVC
DCE.91.072.BVM
Note: see table on page 51 for connector selection and the table
on page 131 for contact selection.
www.lemo.com
302
303
304
3021)
303
304
305
1)
3021)
303
øC
For male
contact
øA
Conductor
AWG
Type
male
Positioners part number
Fig.
Connector + Contact
1.10
0.80
0.45
0.80
0.45
1.40
1.10
1.10
0.80
0.80
0.45
28-30-32
Note: 1) only these types are available in S series.
149
®
®
DCE Positioners for crimp contacts
0.5-0.7-0.9 and 1.3 mm diameter
1
2
1
2
18-20
20-22-24
20-22-24
22-24-26
320/322 0.7 0.80 1
324/326
330
0.7 0.45 2
22-24-26
1.3
1.3
316/320 0.9
324/330 0.9
0.7
340/348
0.7
18-20
20-22-24
20-22-24
22-24-26
22-24-26
28-30-32
Type
male
female
3B
3K
These positioners are suitable for use with both manual and
pneumatic crimping tools according to the MIL-C-22520/7-01
standard.
4B
4K
5B
5K
øC
Conductor
AWG
øA
Fig.
Connector + Contact
308/309 1.3 1.40
310
1.3 1.10
312/314 0.9 1.10
316/318 0.9 0.80
312
1.40
1.10
1.10
0.80
0.80
0.45
1
2
1
2
1
2
Positioners part number
For male
contact
For female
contact
DCE.91.133.BVC
DCE.91.133.BVM
DCE.91.093.BVC
DCE.91.093.BVM
DCE.91.073.BVC
DCE.91.073.BVM
DCE.91.134.BVC
DCE.91.134.BVM
DCE.91.094.BVC
DCE.91.094.BVM
DCE.91.074.BVC
DCE.91.074.BVM
28-30-32
330/340 1.3 1.40 1
348
18-20
DCE.91.135.BVC
DCE.91.135.BVM
350/354 0.9 1.10 1
364
0.9 0.80 2
20-22-24
22-24-26
DCE.91.095.BVC
DCE.91.095.BVM
DCE Turret for crimp contacts 1.6-2.0-3.0 and 4.0 mm diameter
øC
Fig.
Conductor
AWG
2B
2K
302
2.0
2.0
1.6
1.6
2.4
1.9
1.9
1.4
1
2
1
2
12-14-16
14-16-18
14-16-18
18-20-22
3B
3K
302
3.0 2.9
303/304 2.0 2.4
309
2.0 1.9
305/306 1.6 1.9
307
1.6 1.4
1
1
2
1
2
10-12-14
12-14-16
14-16-18
14-16-18
18-20-22
DCE.91.303.BVCM
304
Type
Note: these turrets can be used with manual crimping tool
according to MIL-C-22520/1-01 standard.
Positioners
øA
Connector + Contact
4B
4K
5B
5K
303
Part number
DCE.91.202.BVCM
DCE.91.162.BVCM
DCE.91.203.BVCM
DCE.91.163.BVCM
3.0
2.0
306/307
2.0
1.6
310
1.6
2.9
2.4
1.9
1.9
1.4
1
1
2
1
2
10-12-14
12-14-16
14-16-18
14-16-18
18-20-22
DCE.91.304.BVCM
304
310
4.0
2.9
2.4
1.9
1.9
1.4
1
1
1
2
1
2
10-12
10-12-14
12-14-16
14-16-18
14-16-18
18-20-22
DCE.91.405.BVCM
DCE.91.305.BVCM
4.0
3.0
2.0
314/316
2.0
1.6
320
1.6
DCE.91.204.BVCM
DCE.91.164.BVCM
DCE.91.205.BVCM
DCE.91.165.BVCM
DCK Retention testing tools for crimp contacts
0.5-0.7-0.9 and 1.3 mm diameter
F
150
Contact
øA
Test
force (N)
0.5
0.7
0.9
1.3
8
10
14
25
Testing tool part number
For male
contact
DCK.91.050.8LRC
DCK.91.071.0LRC
DCK.91.091.4LRC
DCK.91.132.5LRC
For female
contact
DCK.91.050.8LRM
DCK.91.071.0LRM
DCK.91.091.4LRM
DCK.91.132.5LRM
www.lemo.com
®
®
DCF Automatic extraction tools for crimp contacts (not valid for FA● and FW● models)
Connector
Type
Extractors part number
Contact
øA
For male
and female contacts
00
302/303/304
0.5
DCF.91.050.2LT
0B
0K
302/303
304/305
306/307/309
0.9
0.7
0.5
DCF.91.090.2LT
DCF.92.070.3LT
DCF.91.050.2LT
1B
1K
302/303
304/305
306/307/308
310/314/316
1.3
0.9
0.7
0.5
DCF.91.131.2LT
DCF.91.090.2LT
DCF.91.070.2LT
DCF.91.050.2LT
2B
2K
302
303
304/305/306/307
308/310
312/314/316/318/319
2.0
1.6
1.3
0.9
0.7
DCC.91.202.5LA 1)
DCF.91.162.2LT
DCF.91.131.2LT
DCF.91.090.2LT
DCF.91.070.2LT 2)
3B
3K
302
303/304/309
305/306/307
308/309/310
312/314/316/318
320/322/324/326/330
3.0
2.0
1.6
1.3
0.9
0.7
DCF.91.303.5LT
DCC.91.202.5LA 1)
DCF.91.163.5LT
DCF.91.133.5LT
DCF.91.093.5LT
DCF.91.073.5LT
4B
4K
304
306/307
310
312
316/320/324/330
340/348
3.0
2.0
1.6
1.3
0.9
0.7
DCF.91.303.5LT
DCC.91.202.5LA 1)
DCF.91.163.5LT
DCF.91.133.5LT
DCF.91.093.5LT
DCF.91.073.5LT
5B
5K
304
310
314/316
320
330/340/348
350/354/364
4.0
3.0
2.0
1.6
1.3
0.9
DCF.91.405.5LT
DCF.91.303.5LT
DCC.91.202.5LA 1)
DCF.91.163.5LT
DCF.91.133.5LT
DCF.91.093.5LT
Note:
1)
2)
this model is thumb-operated. S Series available on request.
For inverted contacts, please use DCF.92.070.3LT instead.
DCF Automatic extraction tools for crimp contacts (for FA● and FW● models)
Contact
øA
(mm)
0B/0K
to
3B/3K
www.lemo.com
1.6
1.3
0.9
0.7
Extractors part number
For male
and female contacts
DCF.92.162.3LT
DCF.92.131.3LT
DCF.92.090.3LT
DCF.92.070.3LT
Note: extractor for FA● of the 4B/4K and 5B/5K still need to be determinated.
151
®
®
Panel cut-outs
P2-P5-P10-P11
L mini
P6-P7
P8
B + 0.1
0
øC
120° x 3
B + 0.1
0
øA
ø A+ 0.1
0
L mini
H
P1-P3-P4-P9
ø A + 0.1
0
B + 0.1
0
ø A + 0.1
0
B series
øA
P1
B
7.1
9.1
12.1
15.1
18.2
25.2
35.21)
6.4
8.3
10.6
13.6
16.6
23.6
33.6
Series
00
0B
1B
2B
3B
4B
5B
L
P2
øA L
øA
P3
B
L
øA
P4
B
P5
ø A2) L
L
øA
P6
B
12.5 7.1 11.5 –
–
–
–
–
–
–
–
–
–
14.5 9.1 13.5 14.1 12.6 20.1 10.1 9.1 15.0 8.30 10.5 –
–
18.5 –
– 16.1 14.6 22.0 14.1 12.6 21.0 11.17 14.0 –
–
22.5 –
– 19.2 17.1 28.0 16.1 15.1 23.0 13.95 18.0 –
–
27.0 –
–
–
–
– 20.2 18.6 29.5 –
–
–
–
36.0 –
–
–
–
– 25.2 23.6 36.1 –
–
–
–
44.0 –
–
–
–
– 35.2 33.6 47.1 –
–
3.3 35.2
P8
B
H
øA
–
–
–
–
–
–
34
–
–
–
–
–
–
–
–
–
–
–
–
2.8 35.2
C
øA
P9
B
L
P10
øA
L
–
–
–
–
–
–
47
7.1
9.1
12.1
15.1
18.2
25.2
35.2
–
8.3
10.6
13.6
16.6
23.6
33.6
12
15
19
23
27
36
47
–
–
11.1
–
–
–
–
–
–
17
–
–
–
–
Note:
1) for using the tapered washer a round hole ø 36 mm apply. 2) tolerance: + 0.02
0
Cut-out types
Model
Mounting nut torque
Type
ECG
EEG
EGG
EFG
EHG
EJG
EKG
Model
P1
P1
P1
P2
P1
P5
P1
Type
ENG
ENY
ESG
EXG
EYG
FAG
FWG
P1
P1
P1/P2
P2/P10
P1/P10
P1
P9
Model
Type
HCG
HEG
HGG
HHG
HMG
HNG
PEG
P3
P9
P9
P9
P9
P9
P1
Model
PFG
PKG
R●●
S●●
XBG
XPF
XRB
Note: 3) in series 1B use P9.
Type
P1
P1
P4
P4/P93)
P2
P2
P2
Model
YHG
Type
Series
P9
00
0B
1B
2B
3B
4B
5B
Torque (Nm)
Metal shell Plastic shell4)
1.0
2.5
4.5
6.0
9.0
12.0
17.0
0.4
0.4
0.7
0.8
1.0
5.0
–
Note: 4) these values apply when metal shell are mounted with insulating washer.
S series
Series
00
0S
1S
2S
3S
4S
5S
6S
øA
P1
B
L
7.1
9.1
12.1
15.1
18.2
25.2
35.21)
48.3
6.4
8.3
10.6
13.6
16.6
23.6
33.6
45.6
12.5
14.5
18.5
22.5
27.0
36.0
44.0
58.0
P2
øA
L
øA
P3
B
L
øA
P4
B
L
P5
ø A2) L
7.1
9.1
12.1
15.1
18.2
25.2
35.2
48.3
–
12.1
14.1
16.1
20.2
25.2
35.2
48.3
–
10.6
12.6
14.6
18.6
23.6
33.6
45.6
–
20.0
21.0
22.0
30.0
36.0
47.0
60.0
–
10.1
12.1
16.1
20.2
25.2
35.2
48.3
–
9.1
10.6
15.1
18.6
23.6
33.6
45.6
–
15
18
23
29
36
47
60
–
–
–
–
–
–
–
–
–
–
11.92 15.5 3.3 12.1 12.7
–
–
3.3 15.1 15.5
–
–
3.3 18.2 18.0
–
–
–
–
–
–
–
4.4 35.2 36.8
–
–
–
–
–
11.5
13.5
19.0
21.5
27.0
34.0
44.0
58.0
øA
P6
B
H
øA
P7
B
H
P10
øA
L
–
–
–
–
–
–
–
–
2.7 11.1 12.4 11.1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
P11
øA L
–
–
–
–
9.1 16
17 12.1 19
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Note:
using the tapered washer a round hole ø 36 mm apply. 2) tolerance: + 0.02
0
1) for
Cut-out types
Model
EBC
EBD
EBS
ECP
EEP
EHP
Note:
152
Type
P6
P6
P7
P1
P1
P2/P1
3)
5)
Mounting nut torque
Model
Type
ERA
ERC
ERD
ERN
ERS
EXP
P1
P1
P1
P1
P2
P2/P10
4)
Model
EWB
FAA
HCP
HGP
HGW
PSA
Type
P3
P1/P23)
P34)
P3
P11
P1
in series 6S use P2. use only ø A in 1S series.
in series 4S and 5S use P2.
Model
PSP
PSS
RAD
SWH
Type
Series
P1
P1
P1/P25)
P4
0S
1S
2S
3S
4S
5S
6S
1 N = 0.102 kg
Torque (Nm)
Metal shell Plastic shell6)
2.5
4.5
6.0
9.0
12.0
17.0
22.0
0.4
0.7
0.8
1.0
5.0
–
–
Note: 6) these values apply when metal shell are mounted with insulating washer.
www.lemo.com
®
®
K series
Series
0K
1K
2K
3K
4K
5K
øA
P1
B
L
øA
14.1
16.1
20.2
24.2
30.2
45.2
12.6
14.6
18.6
22.6
28.6
42.6
20.5
22.5
29.0
35.5
43.0
57.0
–
–
–
3.5
3.5
4.5
P6
B
H
P7
B
øA
–
–
–
–
–
–
22.6 20.6
28.6 27.0
42.6 38.0
–
–
–
3.5
3.5
4.5
H
–
–
–
–
–
–
23.1 23.0
30.1 29.0
45.1 44.0
Cut-out types
Model
EBG
EDG
EEG
EGG
EHG
ENG
Mounting nut torque
Type
Model
P7
P72)
P1
P1
P1
P1
EVG
FAG
FXG
HEG
HGG
PBG
Type
Model
P1
P1
P6
P1
P1
P73)
PEG
PKG
S●●
Type
Series
Torque
(Nm)
P1
P1
P1
0K
1K
2K
3K
4K
5K
5
7
9
12
17
22
1 N = 0.102 kg
Note: 2) for this model dimension B = 18.1. 3) for this model dimension B = 19.1.
E and L series
0E-0L
1E-1L
2E-2L
3E
4E
5E
6E
øA
P1
B
L
øA
P6
14.1
16.1
20.2
24.2
30.2
45.2
55.3
12.6
14.6
18.6
22.6
28.6
42.6
52.1
20.5
22.5
29.0
35.5
43.0
57.0
68.0
–
–
2.9
–
–
–
–
B
Cut-out types
E series
Model
EBR
EEP
EHP
ERA
ERB
ERC
FAA
Type
P6
P1
P1
P1
P1
P1
P1
H
–
–
–
–
15.1 11.8x20.4
–
–
–
–
–
–
–
–
Cut-out types
L series
Model
HGP
PSA
PSP
SWH
Type
P1
P1
P1
P1
Model
EEG
EGG
FAG
HGG
PKG
Mounting nut torque
Type
Series
Torque
(Nm)
P1
P1
P1
P1
P1
0E-0L
1E-1L
2E-2L
3E
4E
5E
6E
5
7
9
12
17
22
27
Panel cut-out for mounting with insulating washer
(S-B series)
GRA
Panel cut-out for mounting with double panel washer
(S-B series)
0.1
ø A+ 0
GRC
0.1
B +0
Series
Dim. (mm)
øA
B
00
0S-0B
1S-1B
2S-2B
3S-3B
4S-4B
8.9
10.9
13.9
18.0
21.9
29.1
8.1
10.0
12.3
16.3
20.3
27.4
1 N = 0.102 kg
øA
H
Series
Series
L mini
0S-0B
1S-1B
Dimensions (mm)
øA
H
L
11
14
14
20
13.5
17.0
Note: for nut tightening torques please refer to the corresponding series in the table on page 152.
www.lemo.com
153
®
®
PCB drilling pattern
Fixed socket with straight print contact (B-K series)
00
0B-0K
1B-1K
2B-2K
0.6
0.8
0.8
0.8
1.2
2.2
2.8
4.4
A
Dimensions
B
C
0.6
0.6
0.8
0.8
0.8
1.6
2.5
3.1
5.0
6.2
45°
45°
45°
45°
45°
A
Dimensions
B
C
0.6
0.8
3.0
3.7
60°
60°
00
0B-0K
1B-1K
2B-2K
3B-3K
øB
306
øA
Series
øB
0B-0K
1B-1K
00
0B-0K
1B-1K
2B-2K
3B-3K
øA
øB
305
Dimensions
B
C
0.6
0.8
0.8
0.8
0.8
1.35
2.30
3.00
4.60
5.60
120°
120°
120°
120°
120°
A
Dimensions
B
C
0.6
0.8
0.8
0.8
2.8
3.4
5.2
6.7
72°
72°
72°
72°
A
Dimensions
B
C
0.8
0.8
5.6
7.1
72°
72°
A
Dimensions
B
C
0.8
3.8
51°26’
A
Dimensions
B
C
0.6
0.8
3.2
7.5
45°
45°
Series
C°
0B-0K
1B-1K
2B-2K
3B-3K
øB
øA
C°
A
Series
306
Series
2B-2K
3B-3K
øB
Series
303
øA
304
Dimensions
A
B
øA
øB
øA
Series
C°
302
P15
C°
C°
A
Dimensions
B
C
0.6
0.8
0.8
0.8
3.00
3.70
5.80
7.08
60°
60°
60°
60°
A
Dimensions
B
C
0.8
0.8
6.4
7.5
45°
45°
øB
C°
øA
0B-0K
1B-1K
2B-2K
3B-3K
308
Series
2B-2K
3B-3K
Series
C°
1B-1K
309
Series
C°
0B-0K
3B-3K
øB
øB
øA
C°
308
øB
Series
øA
307
øA
0.6
0.8
0.8
Dimensions
B
C
D
312
C°
3.95 45° 22°30' 1.40
6.30 45° 22°30' 2.15
7.90 45° 22°30' 2.80
6°
øB
36°
H
3
øA
I
1B-1K
2B-2K
3B-3K
A
0.6
0.8
0.8
Dimensions
B
C
H
4.4
6.5
8.2
316
Series
I
90° 1.90 1.80
90° 2.65 2.65
90° 3.40 3.40
D°
1B-1K
øH
Series
øA
314
154
2B-2K
3B-3K
D°
øA
øA
C°
Series
H
A
Dimensions
B
C
D
H
0.8 6.50 45° 22°30’ 2.80
0.8 8.20 45° 22°30’ 3.40
øB
øB
H
C°
1B-1K
2B-2K
3B-3K
A
A
0.6
Dimensions
B
D
H
4.4 32°44’ 2.00
øB
Series
D°
øH
310
72
°
www.lemo.com
®
Series
°
72
2B-2K
3B-3K
4B-4K
E°
318
Series
H
C°
0.8 6.6 32°44' 16°22’ 3.10
0.8 8.4 32°44' 16°22’ 3.86
0.6 10.5 32°44' 16°22’ 5.00
D°
A
2B-2K
3B-3K
E°
øH
øB
øH
D°
Dimensions
B
D
E
A
B
Dimensions
C D E
H
0.8 6.7 60° 30° 15° 3.50
0.8 8.4 60° 30° 15° 4.34
øB
316
®
øA
øA
Series
C°
A
2B-2K
E°
B
Dimensions
C D E
320
Series
H
3B-3K
4B-4K
øA
øB
B
Dimensions
C
D
H
0.6 8.62 51°26’ 27°42’ 4.78
0.6 11.00 51°26’ 27°42’ 6.00
øB
D°
øH
A
D°
0.8 6.7 60° 30° 15° 3.5
øH
319
324
Series
C°
0.6 8.8 45° 25°43’ 22°30’ 5
øH
D°
3B-3K
4B-4K
øA
36°
90
36°
11°15'
ø 0.6
ø 0.6
ø9
4B-4K.340
°
ø9
2.2
22°
30
'
ø 2.1
40°
ø 0.6
ø 0.6
2.6
4B-4K.348
ø 7.2
5B-5K.350
'
0°
ø 3.1
'
40°
24°
40°
5B-5K.364
11°
18
°5
ø 0.6
60
°
ø 19.84
ø 14.96
ø 19.4
ø9
36°
ø 14.2
ø 3.8
22°30'
ø 5.05
°
ø 10.08
ø 0.6
15'
13°5
1'
0'
7°3
15
12
15°40
17°8'34''
5B-5K.354
ø 12
ø 8.65
ø 7.94
21°11'
ø 5.3
ø2
12
0°
ø 11.64
°
24
ø 0.6
ø7
ø 0.6
2'
27°4
°
8
1
ø 0.6
ø 0.6
4.6
ø 2.2
36°
ø 4.24
°26
51
°
72
ø 19.2
2B-2K.332
°
11°15'
ø 5.6
0°
12
ø7
40°
ø 1.6
ø 4.2
0°
12
90
4B-4K.330
ø 11.4
25°43'
H
0.6 8.8 45° 25°43' 1.8 5.30
0.6 11.1 45° 25°43' 2.2 6.65
øE
3B-3K.330
25°43'
Dimensions
C
D
E
22°
30
'
3B-3K.326
B
7.4
øA
2B-2K.326
A
ø 7.0
H
øB
øH
D°
3B-3K
Dimensions
C
D
E
ø 5.7
E°
B
ø 13.73
A
ø 8.36
Series
C°
øB
322
ø 3.1
øA
C°
27°41'32''
7'
Note: all views are from the side of the socket.
www.lemo.com
155
®
®
Length of straight print contacts
(for socket E●●)
Length of straight print contacts
(for socket EZG/EYG/XPF)
Dimensions
Type
Models
EZG/EYG
XPF
øC
L
øC
L
Type
øC
L
00
302
303
304
0.5
0.5
0.5
3.0
3.0
3.0
0B
302/303
304/305
306/307/309
0.7
0.5
0.5
4.5
4.5
3.0
–
0.7
–
–
3.0
–
0B
0K
302/303
304/305
306/307/309
0.7
0.5
0.5
3.2
3.2
3.2
1B
302/303/304/305
306/307/308
310/314/316
0.7
0.7
0.5
3.8
3.8
3.8
–
–
–
–
–
–
1B
1K
302/303/304/305
306/307/308
310/314/316
0.7
0.7
0.5
3.0
3.0
4.0
2B
302/303/304/305
306/307/308/310
312/314/316/318/319
0.7
0.7
0.7
5.5
5.5
5.5
–
–
–
–
–
–
2B
2K
302/303/304/305/306/307
308/310/312/314/316/318/319
326/332
0.7
0.7
0.5
3.0
3.0
3.0
3B
3K
303/304/305/306/307
308/309/310/312/314/316/318
320/322/324/326/330
0.7
0.7
0.5
3.0
3.0
5.0
4B
4K
316/320
324/330
340/348
0.5
0.5
0.5
5.0
5.0
5.0
5B
5K
348
350
354
364
0.7
0.5
0.5
0.5
5.0
5.0
5.0
5.0
EZG/EYG/XPF
øC
øC
E●●
L
L
Note: This table does not apply for socket H●●; socket EH● and plugs FA●/FW●.
Fixed socket for printed circuit (B series)
P16
Holes for fixing the housing
EYG-EZG
B
Series
øA
00
0B
1B
2B
Dimensions
A
B
0.81)
1.72)
1.72)
1.72)
5.08
7.62
7.62
10.16
XPF.0B
B
Series
øA
0B
Dimensions
A
B
1.7
5.08
Note: Mounting torque for screws: 0.1 Nm.
1) to solder. 2) to screw.
156
www.lemo.com
®
®
Fixed socket with elbow print contact (B-K series)
P17
302
Series
Dim.
A
00
0B-0K
1B-1K
2B-2K
0.6
0.7
0.9
0.9
øA
1
A
2
A
2.54
Dim.
Series
L
øA
00
0B-0K
1B-1K
2B-2K
3
1
L
2
2.54
0B-0K.305
304
L
0.6
0.7
0.9
0.9
1.27
1.27
1.27
2.54
4
3
1
2
00
0B-0K
1B-1K
2B-2K
3B-3K
2.54
1B-1K.305
Dim.
Series
øA
A
L
303
A
L
0.6
0.7
0.7
0.9
0.9
2.54
2.54
2.54
3.50
2.54
0B-0K / 1B-1K.306
2B-2K.305
ø 0.7
1.27
1.27
2
2.54 2.54
1
2
2.54 2.54
5
6
3
4
1
2.54 2.54
2.54 2.54
3
3
2
1.27
1
4
ø 0.9
3
5
2.54 2.54
2
1
4
ø 0.7
4
ø 0.7
5
5
2.54 2.54
7
3
7
1
2.54 2.54
1
5
6
8
5
9
10
1
4
4
2
1.27
3
7
2.54 2.54
7
3
8
8
11
9
5
10
6
11
13
1
12
11
2
2
1
4
3
2.54 2.54 2.54 2.54
2B-2K.319
10
16
15
13
14
3
4
6
9
12
18
17
14
15
3
4
2
5
7
16
13
1
9
18
17
13
16
14
15
3
4
8
12
7
6
6
1
5
2
1.27
2.54 2.54 2.54 2.54
3B-3K.320
10
11
8
1.27
1.27
1.27
2.54 2.54 2.54 2.54
5
4
3
11
7
2
3
12
3B-3K.318
8
12
5
6
13
1
4
1.27
14
14
11
2B-2K.318
10
ø 0.7
10
7
10
ø 0.7
9
7
2.54 2.54
2
ø 0.7
8
3
9
2.54 2.54 2.54
2B-2K / 3B-3K.316
9
2
1B-1K / 2B-2K.314
2.54 2.54 2.54
3B-3K.314
8
6
12
1
1
1.27
6
ø 0.7
ø 0.9
(3B-3K)
7
2B-2K / 3B-3K.312
2.54 2.54 2.54
1B-1K / 2B-2K / 3B-3K.310
ø 0.7
ø 0.9
(3B-3K)
2B-2K / 3B-3K.308
6
4
1.27
2.54 2.54
7
5
2
1.27
1.27
2.54 2.54
2.54
3
2
2
2
4
3B-3K.324
ø 0.7
1
6
0.92
3
1
5
4
ø 0.7
ø 0.9
6
6
ø 0.7
5
5
8
1B-1K.308
ø 0.9
4
2B-2K.307
ø 0.7
0B-0K / 1B-1K.307
ø 0.7
2B-2K / 3B-3K.306
5
2.54
5.08
2.54
3B-3K.330
ø 0.7
11
14
16
15
2
www.lemo.com
7
16
17
3
1.27
23
1
16
5
8
7
18
17
3
12
11
25
24
23
29
22
10
30
9
17
27
18
19
20
21
3
4
5
6
28
1
6
5
2.54 2.54 2.54 2.54
13
26
16
8
2
4
2.54 2.54 2.54 2.54
14
15
19
24
2
6
4
1.27
1.27
2
4
14
9
20
15
18
15
21
22
8
1
6
13
9
14
5
3
19
1.27
1
10
20
10
ø 0.7
19
13
7
13
1.27
17
18
ø 0.7
12
11
12
8
ø 0.7
9
10
11
12
7
2.54 2.54 2.54 2.54 2.54 2.54
157
®
Elbow socket (90°) for printed circuit (B series)
P18
P18 - EPG.00.302 - XBG.00.302
XRB.00.3021)
5.08
P19
P20
P18 - EPG.00.3032) - XBG.00.3032) P18 - EPG.00.304 - XBG.00.304
XRB.00.3041)
XRB.00.3031)
ø 0.8
ø 0.8
5.08
5.08
ø 0.8
ø 0.6
1.9
7.62
7.62
1.27
7.62
1.27
2.54
7.62
7.62
ø 0.8
1.27
1.27
ø 1.7
ø 0.7
7.62
12.7
1.27
2.54
7.62
1.27
2.54
ø 1.7
7.62
ø 1.7
7.62
P20 - EPG.1B.314
12.7
ø 0.8
1.27
2.54
7.62
1.27
1.27
7.62
P19 - EPG-EXG (1B.310)
Screw mount
P19 - EPG-EXG (0B.309)
Screw mount
ø 0.8
7.62
ø 0.8
1.27
ø 0.8
1.27
ø 0.8
7.62
2.54
2.54
7.62
2.54
2.54
1.27
2.54
7.62
1.27
ø 0.8
1.27
P19 - EPG-EXG (1B.310)
Solder mount
2.54
P19 - EPG-EXG (0B.309)
Solder mount
ø 1.7
7.62
ø 1.7
7.62
ø 0.8
1.27
2.54
P19 - EPG-EXG (1B.308)
Screw mount
ø 0.8
ø 0.8
7.62
P19 - EPG-EXG (0B/1B.307)
Screw mount
ø 0.8
1.27
ø 0.8
2.54
P19 - EPG-EXG (1B.308)
Solder mount
2.54
P19 - EPG-EXG (0B/1B.307)
Solder mount
2.54
ø 1.7
ø 1.7
7.62
ø 0.8
2.54
7.62
ø 0.8
2.54
7.62
ø 0.8
7.62
7.62
2.54
P19 - EPG-EXG (0B/1B.306)
Screw mount
7.62
P19 - EPG-EXG (0B/1B.305)
Screw mount
ø 0.8
2.54
7.62
2.54
ø 0.8
ø 0.8
2.54
P19 - EPG-EXG (0B/1B.305)
Solder mount
ø 0.8
2.54
P19 - EPG-EXG (0B/1B.306)
Solder mount
ø 1.7
7.62
7.62
7.62
2.54
7.62
2.54
ø 1.7
7.62
P19 - EPG-EXG (0B/1B.303)
Screw mount
ø 0.8
2.54
P19 - EPG-EXG (0B/1B.304)
Screw mount
ø 0.8
2.54
7.62
ø 0.8
7.62
ø 0.8
2.54
ø 0.8
7.62
1.27
P19 - EPG-EXG (0B/1B.303)
Solder mount
2.54
2.54
ø 1.7
7.62
7.62
2.54
ø 0.8
P19 - EPG-EXG (0B/1B.304)
Solder mount
5.08
1.27
P19 - EPG-EXG (0B/1B.302)
Screw mount
ø 0.8
2.54
1.9
ø 0.6
1.27
7.62
1.27
1.9
1.9
P19 - EPG-EXG (0B/1B.302)
Solder mount
0.63
A
=
A
=
=
=
ø 0.6
1.27
®
ø 0.8
1.27
2.54
1.27
Note: 1) for the XRB.00 series the holes for shell fixing are different (see p. 30).
2) the dimensions for the EPG.00.303.HLN and XBG.00.303.HLN models are given on page 23. For other models please contact factory.
158
www.lemo.com
®
®
Fixed socket with straight print contact (S-E series)
øB
øA
Series
Dimensions
A
B
0S-0E
1S-1E
0.8
0.8
303
C°
2.2
3.0
0S-0E
1S-1E
2S-2E
øB
A
Dimensions
B
C
0.6
0.8
0.8
2.8
3.5
5.0
45°
45°
45°
A
Dimensions
B
C
0.8
0.8
0.8
3.5
5.5
6.5
60°
60°
60°
øA
øB
1S-1E
2S-2E
3S-3E
308
Series
2S-2E
3S-3E
øB
A
Dimensions
B
C
0.8
0.8
6.5
7.8
45°
45°
45°
45°
60°
øA
øB
A
Dimensions
B
C
0.8
0.8
3.5
5.5
C
Dimensions
D
E
F
45°
45°
22°30’ 2.75
22°30’ 3.25
3.25
3.90
A
Dimensions
B
C
D
0.8
0.8
6.5
7.8
60°
60°
D
45°
60°
D°
Series
C°
60°
310
2S-2E
3S-3E
D°
Series
C°
22°30’
22°30’
2S-2E
3S-3E
E
45° 22°30’ 1.25
45° 22°30’ 1.50
øA
3S-3E.314
3.2
1.3
ø 0.8
1.3
8x1
2.9
3.2
3S-3E.316
6 x 1.2
6 x 1.2
1.2
3S-3E.313
6 x 1.2
ø 0.8
3S-3E.312
ø 0.8
307
D
2.8
3.5
5.5
3.2
øA
C°
D°
C
0.6
0.8
0.8
D°
1.3
C°
1S-1E
2S-2E
F
Series
Dimensions
B
E
306
Series
øB
øB
C°
ø 0.8
0S-0E
1S-1E
2S-2E
305
E
Series
øA
C°
ø 0.8
304
A
Series
øA
302
P21
3S-3E.318
ø 0.8
1.2
2.9
8x1
Note: all views are from the side of the socket.
øC
Length of straight print contacts (for socket E●●)
L
Type
0S
0E
302
303
304
1S
1E
302
303/304/305
305/306
Dimensions
øC
L
0.7
0.5
0.5
3.0
3.0
3.0
0.7/1.5 3.0/5.0
0.7
3.0
0.5
3.0
Type
Dimensions
øC
L
2S
2E
303/304/305
306/307
308/310
0.7
0.7
0.7
3.0
3.0
3.0
3S
3E
305/306/307/308/310
312/313/314
316/318
0.7
0.7
0.7
3.0
3.0
3.0
Note: This table does not apply for HGP and EHP sockets and for FAA plugs.
www.lemo.com
159
®
Elbow socket (90°) for printed circuit (S series)
P22 - EPL - EXP
Solder mount
P23
P22 - EPL - EXP
Screw mount
P23 - EPL.00.113
P23 - EPL.0S.116
5.08
5.08
ø 1.7
7.62
ø 0.8
2.54
ø 1.1
=
=
7.62
2.54
7.62
2.54
2.54
2.54
2.54
=
2.54
ø 0.8
7.62
2.54
P22
=
®
2.54
2.54
2.54
2.54
Note: all dimensions are in millimetres.
Fixed socket with elbow print contact (S-E series)
P24
302
øA
1
A
2
Series
Dim.
A
0S-0E
1S-1E
0.7
0.9
Series
Dimensions
A
B
0S-0E
1S-1E
2S-2E
0.7
0.7
0.9
Series
Dim.
A
1S-1E
2S-2E
0.7
0.9
A
2.54
Series
C
B
0.7
0.7
0S-0E
1S-1E
1
3
Dimensions
B
C
A
øA
2.00
2.48
304
øA
1.00
1.24
2
4
2
3
2.00
3.50
3.50
2.54
2.54
Dim.
A
5
3
0.7
0.9
1S-1E
2S-2E
øA
2
306
4
1
6
2
5
3
4
øA
Series
1
2.4 2.4
305
2.54 2.54
1
B
303
2.54
2.54 2.54
2S-2E.308
2S-2E / 3S-3E.310
3S-3E.312
4
5
2.54 2.54 2.54
6
2.54 2.54 2.54
8
5
9
6
10
11
ø 0.7
10
7
4
2.4
9
3
1
2
12
1.2
2.54 2.54
5
1.25
4
7
3
6
5
1.75
4
1.75
3
3
8
2
ø 0.7
1
7
6
6
1.27
8
ø 0.7
1
2
6
7
2.5
1
2
ø 0.7
1.2
2S-2E.307
2.54 2.54 2.54
3S-3E.316
1.2
3S-3E.314
8
5
9
12
6
10
7
11
3
9
6
10
13
2
14
2.4
13
ø 0.7
2
5
1
14
3
15
7
11
8
12
2.54 2.54 2.54
16
1.2
1.2
4
ø 0.7
4
1
2.54 2.54 2.54
160
www.lemo.com
®
®
Cable assembly (B, K, S and E series)
Cable stripping lengths (B series)
straight plugs and sockets with cable collet, clamping type D or M (solder or crimp contacts)
M3
elbow plugs (90°) with cable collet, clamping type D or M (solder or crimp contacts)
Connector
Series
00
0B1)
1B1)
2B
L
T
S
3B
Type
302/303/304
305
302/303
304/305
306/307/3092)
312
302/303
304/305
306/307/308
310/314/316
302
303
304/305/306/307
308/310
312/314/316/318/319
326/332
302
303/304
305/306/307
308/310
309
4B
5B1)
0.5
0.35
0.9
0.7
0.5
0.35
1.3
0.9
0.7
0.5
2.0
1.6
1.3
0.9
0.7
0.5
3.0
2.0
1.6
1.3
1.3
2.0
0.9
0.7
3.0
2.0
1.6
1.3
0.9
0.7
6.0
4.0
3.0
2.0
1.6
1.3
0.9
Cable stripping lengths (mm)
M1
L
Solder
S
7.0
7.0
14.5
14.5
14.0
14.0
14.5
14.5
14.5
16.5
19.0
19.0
18.0
17.0
17.0
17.0
24.0
23.0
23.0
22.0
4
4
7
7
7
7
8
8
8
8
9
9
9
9
9
9
10
10
10
10
22.0
10
21.0
21.0
33.0
32.0
32.0
32.0
32.0
32.0
42.0
47.0
47.0
46.0
46.0
45.0
45.0
10
10
12
12
12
12
12
12
18
18
18
18
18
18
18
M3
T
L
Crimp
S
2.5
2.5
3.5
3.5
2.5
2.5
3.5
3.0
3.0
2.5
4.0
3.5
3.5
3.0
3.0
2.5
4.5
4.0
3.5
3.5
3.5
4.0
3.0
3.0
4.5
4.0
3.5
3.5
3.0
3.0
7.5
5.5
4.5
4.0
3.5
3.5
3.0
10.0
–
17.0
17.0
18.0
–
18.0
18.0
18.0
–
22.0
22.0
20.0
20.0
20.0
–
28.0
27.0
27.0
25.0
4
–
7
7
7
–
8
8
8
–
9
9
9
9
9
–
10
10
10
10
25.0
10
25.0
25.0
36.0
36.0
36.0
36.0
34.0
34.0
–
50.0
50.0
49.0
49.0
48.0
48.0
10
10
12
12
12
12
12
12
–
18
18
18
18
18
18
T
L
Solder
S
3.0
–
4.0
4.0
3.0
–
4.0
4.0
4.0
–
5.5
5.5
4.0
4.0
4.0
–
5.5
5.5
5.5
4.0
4.0
5.5
4.0
4.0
5.5
5.5
5.5
4.0
4.0
4.0
–
7.0
7.0
5.5
5.5
4.0
4.0
9.5
9.5
19.5
19.5
19.0
19.0
25.5
25.5
25.5
27.5
30.0
30.0
29.0
28.0
28.0
28.0
35.0
34.0
34.0
33.0
4
4
7
7
7
7
8
8
8
8
9
9
9
9
9
9
10
10
10
10
33.0
10
32.0
32.0
41.0
41.0
39.0
39.0
39.0
39.0
70.0
75.0
75.0
74.0
74.0
74.0
74.0
10
10
12
12
12
12
12
12
18
18
18
18
18
18
18
T
L
Crimp
S
2.5
2.5
3.5
3.5
2.5
2.5
3.5
3.0
3.0
2.5
4.0
3.5
3.5
3.0
3.0
2.5
4.5
4.0
3.5
3.5
3.5
4.0
3.0
3.0
4.5
4.0
3.5
3.5
3.0
3.0
7.5
5.5
4.5
4.0
3.5
3.5
3.0
12.5
–
22.0
22.0
23.0
–
28.0
28.0
28.0
–
33.0
33.0
31.0
31.0
31.0
–
39.0
38.0
38.0
36.0
4
–
7
7
7
–
8
8
8
–
9
9
9
9
9
–
10
10
10
10
36.0
10
36.0
36.0
45.0
45.0
43.0
43.0
43.0
43.0
–
78.0
78.0
77.0
77.0
77.0
77.0
10
10
12
12
12
12
12
12
–
18
18
18
18
18
18
T
3.0
–
4.0
4.0
3.0
–
4.0
4.0
4.0
–
5.5
5.5
4.0
4.0
4.0
–
5.5
5.5
5.5
4.0
4.0
5.5
4.0
4.0
5.5
5.5
5.5
4.0
4.0
4.0
–
7.0
7.0
5.5
5.5
4.0
4.0
straight plug, short version, clamping type D or M (solder or crimp contacts)
L
Type
ø contact A
(mm)
M4
312/314/316/318
320/322/324/326/330
304
306/307
310
312
316/320/324/330
340/348
302
304
310
314/316
320
330/340/348
350/354/364
ø contact A
(mm)
M1
302/303
304/305
306/307/3092)
0.9
0.7
0.5
Connector
T
Series
S
0B
Cable stripping lengths (mm)
M4
Solder
Crimp
L
S
T
L
S
T
9.5
9.5
10.0
8
8
8
3.0
3.0
2.5
13.0
13.0
13.5
8
8
8
4.0
4.0
3.0
Note: the tolerances on these dimensions are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.
1) In 0B and 1B series, «L» and «S» dimensions shall be increased by 2 mm for the largest collet (D56 in 0B series; D76 in 1B series).
In 5B series, «L» and «S» dimensions shall be increased by 13 mm for the largest collet (D25).
2) Crimp contacts are available only for connectors fitted with male contacts.
www.lemo.com
161
®
®
straight plug, long version, clamping type D or M (solder or crimp contacts)
Type
ø contact A
(mm)
M2
302/303
304/305
306/307/308
310/314/316
302
303
304/305/306/307
308/310
312/314/316/318/319
326/332
1.3
0.9
0.7
0.5
2.0
1.6
1.3
0.9
0.7
0.5
Connector
Series
L
T
1B1)
S
2B
Cable stripping lengths (mm)
M2
Solder
Crimp
L
S
T
L
S
T
39.5
39.5
39.5
42.0
49.0
49.0
48.0
47.0
47.0
47.0
8
8
8
8
9
9
9
9
9
9
3.5
3.0
3.0
2.5
4.0
3.5
3.5
3.0
3.0
2.5
43.0
43.0
43.0
–
53.0
53.0
50.0
49.0
49.0
–
8
8
8
–
9
9
9
9
9
–
4.0
4.0
4.0
–
5.5
5.5
4.0
4.0
4.0
–
Note:
1) In 0B and 1B series, «L» and «S»
dimensions shall be increased by
2 mm for the largest collet (D56 in
0B series; D76 in 1B series).
In 5B series, «L» and «S» dimensions shall be increased by 13 mm
for the largest collet (D25).
The tolerances on these dimensions
are: L: ± 0.5 mm; S: ± 0.5 mm; T: ±
0.2 mm
Cable stripping lengths (K series)
straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)
M3
elbow plug (90°) with cable collet, clamping type C (solder or crimp contacts)
Connector
Series
0K
1K
2K
L
T
S
3K
Type
302/303
304/305
306/307/3091)
312
302/303
304/305
306/307/308
310/314/316
302
303
304/305/306/307
308/310
312/314/316/318/319
326/332
302
303/304
305/306/307
308/310
309
4K
5K
Note:
162
1)
312/314/316/318
320/322/324/326/330
304
306/307
310
312
316/320/324/330
340/348
302
304
310
314/316
320
330/340/348
350/354/364
ø contact A
(mm)
M1
0.9
0.7
0.5
0.35
1.3
0.9
0.7
0.5
2.0
1.6
1.3
0.9
0.7
0.5
3.0
2.0
1.6
1.3
1.3
2.0
0.9
0.7
3.0
2.0
1.6
1.3
0.9
0.7
6.0
4.0
3.0
2.0
1.6
1.3
0.9
Cable stripping lengths (mm)
M1
L
Solder
S
9.5
9.5
9.0
9.0
11.0
11.0
11.0
13.0
16.5
16.5
15.5
14.5
14.5
14.5
19.0
18.0
18.0
17.0
6
6
6
6
7
7
7
7
8
8
8
8
8
8
10
10
10
10
17.0
10
16.0
16.0
22.0
21.0
21.0
21.0
21.0
21.0
24.0
29.0
29.0
28.0
28.0
27.0
27.0
10
10
11
11
11
11
11
11
14
14
14
14
14
14
14
M3
T
L
Crimp
S
3.5
3.5
2.5
2.5
3.5
3.0
3.0
2.5
4.0
3.5
3.5
3.0
3.0
2.5
4.5
4.0
3.5
3.5
3.5
4.0
3.0
3.0
4.5
4.0
3.5
3.5
3.0
3.0
7.5
5.5
4.5
4.0
3.5
3.5
3.0
12.0
12.0
13.0
–
14.5
14.5
14.5
–
19.5
19.5
17.5
17.5
17.5
–
23.0
22.0
22.0
20.0
6
6
6
–
7
7
7
–
8
8
8
8
8
–
10
10
10
10
20.0
10
20.0
20.0
25.0
25.0
25.0
25.0
23.0
23.0
–
32.0
32.0
31.0
31.0
30.0
30.0
10
10
11
11
11
11
11
11
–
14
14
14
14
14
14
T
L
Solder
S
4.0
4.0
4.0
–
4.0
4.0
4.0
–
5.5
5.5
4.0
4.0
4.0
–
5.5
5.5
5.5
4.0
4.0
5.5
4.0
4.0
5.5
5.5
5.5
4.0
4.0
4.0
–
7.0
7.0
5.5
5.5
4.0
4.0
22.5
22.5
22.0
22.0
27.5
27.5
27.5
29.5
36.0
36.0
35.0
34.0
34.0
34.0
48.0
48.0
48.0
47.0
6
6
6
6
7
7
7
7
8
8
8
8
8
8
10
10
10
10
47.0
10
46.0
46.0
52.0
51.0
51.0
51.0
51.0
51.0
–
–
–
–
–
–
–
10
10
11
11
11
11
11
11
–
–
–
–
–
–
–
T
L
Crimp
S
3.5
3.5
2.5
2.5
3.5
3.0
3.0
2.5
4.0
3.5
3.5
3.0
3.0
2.5
4.5
4.0
3.5
3.5
3.5
4.0
3.0
3.0
4.5
4.0
3.5
3.5
3.0
3.0
–
–
–
–
–
–
–
25.0
25.0
26.0
–
31.0
31.0
31.0
–
39.0
39.0
37.0
37.0
37.0
–
53.0
52.0
52.0
50.0
6
6
6
–
7
7
7
–
8
8
8
8
8
–
10
10
10
10
50.0
10
50.0
50.0
55.0
55.0
55.0
55.0
53.0
53.0
–
–
–
–
–
–
–
10
10
11
11
11
11
11
11
–
–
–
–
–
–
–
T
4.0
4.0
4.0
–
4.0
4.0
4.0
–
5.5
5.5
4.0
4.0
4.0
–
5.5
5.5
5.5
4.0
4.0
5.5
4.0
4.0
5.5
5.5
5.5
4.0
4.0
4.0
–
–
–
–
–
–
–
crimp contacts are available only for connectors fitted with male contacts. The tolerances on these dim. are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.
www.lemo.com
®
®
Cable stripping lengths (K series)
straight plug and socket with oversize cable collet, clamping type K (solder or crimp contacts)
Connector
Series
1K
2K
L
T
S
3K
Type
302/303
304/305
306/307/308
310/314/316
302
303
304/305/306/307
308/310
312/314/316/318/319
326/332
302
303/304
305/306/307
308/310
309
4K
312/314/316/318
320/322/324/326/330
304
306/307
310
312
316/320/324/330
340/348
Cable stripping lengths (mm)
M2
Solder
Crimp
L
S
T
L
S
T
ø contact A
(mm)
M2
1.3
0.9
0.7
0.5
2.0
1.6
1.3
0.9
0.7
0.5
3.0
2.0
1.6
1.3
1.3
2.0
0.9
0.7
3.0
2.0
1.6
1.3
0.9
0.7
23.5
23.5
23.5
24.5
29.5
29.5
28.5
27.5
27.5
27.5
37.0
36.0
36.0
35.0
8
8
8
8
10
10
10
10
10
10
11
11
11
11
35.0
11
34.0
34.0
45.0
44.0
44.0
44.0
44.0
44.0
11
11
14
14
14
14
14
14
3.5
3.0
3.0
2.5
4.0
3.5
3.5
3.0
3.0
2.5
4.5
4.0
3.5
3.5
3.5
4.0
3.0
3.0
4.5
4.0
3.5
3.5
3.0
3.0
27.5
27.5
27.5
–
32.5
32.5
30.5
30.5
30.5
–
41.0
40.0
40.0
38.0
8
8
8
–
10
10
10
10
10
–
11
11
11
11
38.0
11
38.0
38.0
48.0
48.0
48.0
48.0
46.0
46.0
11
11
14
14
14
14
14
14
4.0
4.0
4.0
–
5.5
5.5
4.0
4.0
4.0
–
5.5
5.5
5.5
4.0
4.0
5.5
4.0
4.0
5.5
5.5
5.5
4.0
4.0
4.0
Note:
the tolerances on these dimensions
are: L: ± 0.5 mm
S: ± 0.5 mm
T: ± 0.2 mm
Cable stripping lengths for unipole connectors (S series)
straight plugs and sockets with cable collet, clamping type C (solder contacts)
M3
elbow plugs (90°) with cable collet, clamping type C (solder contacts)
M5
straight plugs and sockets with cable crimping type E (crimp contacts)
M6
elbow plugs (90°) with cable crimping type E (crimp contacts)
Connector
Series
00
0S
L
T
1S
2S
S
3S
4S
5S
www.lemo.com
Type
113
116
120
130
130
140
140
160
140
160
112
ø contact A
(mm)
M1
L
M1
Solder
S
1.3
1.6
2.0
3.0
3.0
4.0
4.0
6.0
4.0
6.0
12.0
9
11
13
13
18
18
21
21
25
25
12
4
5
8
8
9
9
9
9
9
9
15
T
Cable stripping lengths (mm)
M5
M3
Crimp
Solder
L
S
T
L
S
T
4
4
5
5
6
6
7
9
7
9
12
19
–
–
–
–
–
–
–
–
–
–
5
–
–
–
–
–
–
–
–
–
–
7
–
–
–
–
–
–
–
–
–
–
7
8
13
13
15
15
19
19
23
23
–
4
5
8
8
9
9
9
9
9
9
–
2
2
2
2
2
2
2
2
2
2
–
L
M6
Crimp
S
T
17
–
–
–
–
–
–
–
–
–
–
5
–
–
–
–
–
–
–
–
–
–
7
–
–
–
–
–
–
–
–
–
–
163
®
®
Cable stripping lengths for unipole connectors (S series)
straight plugs and sockets with oversize cable collet, clamping type K (solder contacts)
Connector
Series
Type
L
00
0S
T
1S
S
2S
3S
4S
113
116
120
130
130
140
140
160
140
160
ø contact A
(mm)
M2
1.3
1.6
2.0
3.0
3.0
4.0
4.0
6.0
4.0
6.0
Cable stripping
lengths (mm)
L
M2
Solder
S
T
16
19
25
25
34
34
39
39
50
50
4
5
8
8
9
9
9
9
9
9
4
4
5
5
6
6
7
9
7
9
Cable stripping lengths for multipole connectors (S series)
M1
straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)
M3
elbow plugs (90°) with cable collet, clamping type C (solder or crimp contacts)
Series
0S
1S
Type
302
303/304
306
302
303/304
305
306
302
303/304/305/306
L
2S
T
307
308/310
302/303/304
S
3S
305
306/307/308/310
312/313/314/316/318
302
303/304
305
4S
306
307
308/309/310
312/313/314
316/318/320/322/324
164
Cable stripping lengths (mm)
ø contact A
(mm)
Connector
L
Solder
S
T
0.9
0.7
0.5
1.3
0.9
0.9
0.7
0.7
1.6
1.3
1.3
0.9
0.9
2.0
2.0
1.3
1.3
0.9
4.0
3.0
3.0
2.0
2.0
2.0
1.3
1.3
1.3
0.9
10
10
10
12
12
12
12
12
18
18
18
18
18
21
21
21
21
21
25
25
25
25
25
25
25
25
25
25
5
5
5
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
3.5
3.5
2.5
3.0
3.0
3.0
2.5
2.5
4.5
4.0
4.0
4.0
4.0
5.0
5.0
4.0
4.0
4.0
7.0
6.0
6.0
5.0
5.0
5.0
4.0
4.0
4.0
4.0
M1
M3
L
Crimp
S
T
15
15
–
17
17
17
17
17
22
22
22
22
22
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5
5
–
8
8
8
8
8
9
9
9
9
9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4.0
4.0
–
4.0
4.0
4.0
4.0
4.0
5.5
4.0
4.0
4.0
4.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
L
Solder
S
T
L
Crimp
S
T
10
10
10
14
14
14
14
14
18
18
18
18
18
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5
5
5
8
8
8
8
8
9
9
9
9
9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
3.5
3.5
2.5
3.0
3.0
3.0
2.5
2.5
4.5
4.0
4.0
4.0
4.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
15
15
–
17
17
17
17
17
22
22
22
22
22
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5
5
–
8
8
8
8
8
9
9
9
9
9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4.0
4.0
–
4.0
4.0
4.0
4.0
4.0
5.5
4.0
4.0
4.0
4.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
www.lemo.com
®
®
Cable stripping lengths for multipole connectors (S series)
straight plugs and sockets with cable collet, clamping type C (solder contacts)
M3
elbow plugs (90°) with cable collet, clamping type C (solder contacts)
Connector
Series
Type
302
303
304
305
306/308
310/312
L
5S
T
314
316
318
S
320
322
6S
324
330/336/340/344/348
304
312/318
320/324
330/336/348
360
364/372
106
ø contact A
(mm)
M1
Cable stripping lengths (mm)
M1
M3
Solder
Solder
L
S
T
L
S
T
6.0
6.0
4.0
4.0
4.0
3.0
3.0
2.0
3.0
2.0
2.0
3.0
1.6
1.6
3.0
1.6
1.6
1.3
8.0
4.0
3.0
2.0
1.6
1.3
0.9
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
37
37
37
37
37
37
37
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
15
15
15
15
15
15
15
9.0
9.0
7.0
7.0
7.0
6.0
6.0
7.0
6.0
7.0
7.0
6.0
4.5
4.5
6.0
4.5
4.5
4.0
10.0
7.0
6.0
7.0
4.5
4.0
4.0
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
37
37
37
37
37
37
37
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
15
15
15
15
15
15
15
9.0
9.0
7.0
7.0
7.0
6.0
6.0
7.0
6.0
7.0
7.0
6.0
4.5
4.5
6.0
4.5
4.5
4.0
10.0
7.0
6.0
7.0
4.5
4.0
4.0
Cable stripping lengths for multipole connectors (S series)
straight plug with cable collet, clamping type D or M (solder or crimp contacts)
Connector
L
Series
T
Type
302
303/304/305/306
S
2S
307
308/310
www.lemo.com
ø contact A
(mm)
M4
Cable stripping lengths (mm)
M4
Solder
Crimp
L
S
T
L
S
T
1.6
1.3
1.3
0.9
0.9
48
48
48
48
48
9
9
9
9
9
4.5
4.0
4.0
4.0
4.0
52
52
52
52
52
9
9
9
9
9
5.5
4.0
4.0
4.0
4.0
165
®
®
Cable stripping lengths for multipole connectors (S series)
straight plugs and sockets with oversize cable collet, clamping type K (solder or crimp contacts)
Connector
Series
0S
1S
Type
302
303/304
306
302
303/304
305
306
302
303/304/305/306
2S
307
308/310
302/303/304
3S
305
306/307/308/310
312/313/314/316/318
302
303/304
L
T
305
S
4S
306
307
308/309/310
312/313/314
316/318/320/322/324
302
303
304
305
306/308
310/312
5S
314
316
318
320
322
324
330/336/340/344/348
166
Cable stripping lengths (mm)
ø contact A
(mm)
M2
L
Solder
S
T
L
Crimp
S
T
0.9
0.7
0.5
1.3
0.9
0.9
0.7
0.7
1.6
1.3
1.3
0.9
0.9
2.0
2.0
1.3
1.3
0.9
4.0
3.0
3.0
2.0
2.0
2.0
1.3
1.3
1.3
0.9
6.0
6.0
4.0
4.0
4.0
3.0
3.0
2.0
3.0
2.0
2.0
3.0
1.6
1.6
3.0
1.6
1.6
1.3
19
19
19
24
24
24
24
24
34
34
34
34
34
39
39
39
39
39
50
50
50
50
50
50
50
50
50
50
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
5
5
5
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
3.0
2.5
2.5
3.0
3.0
3.0
2.5
2.5
4.5
4.0
4.0
4.0
4.0
5.0
5.0
4.0
4.0
4.0
7.0
6.0
6.0
5.0
5.0
5.0
4.0
4.0
4.0
4.0
9.0
9.0
7.0
7.0
7.0
6.0
6.0
7.0
6.0
7.0
7.0
6.0
4.5
4.5
6.0
4.5
4.5
4.0
23
23
–
28
28
28
28
28
38
38
38
38
38
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5
5
–
8
8
8
8
8
9
9
9
9
9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4.0
4.0
–
4.0
4.0
4.0
4.0
4.0
5.5
4.0
4.0
4.0
4.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
M2
www.lemo.com
®
®
Cable stripping lengths for unipole connectors (E series)
straight plugs and sockets with cable collet, clamping type C (solder contacts)
M3
elbow plugs (90°) with cable collet, clamping type C (solder contacts)
Connector
Series
Type
L
0E
T
1E
2E
S
3E
4E
5E
116
120
130
130
140
140
160
160
112
ø contact A
(mm)
M1
Cable stripping lengths (mm)
M1
M3
Solder
Solder
L
S
T
L
S
T
1.6
2.0
3.0
3.0
4.0
4.0
6.0
6.0
12.0
9
12
13
16
15
19
20
23
12
5
8
8
9
9
9
9
9
15
4
5
5
6
6
7
9
9
12
20
25
25
33
33
40
40
50
–
5
8
8
9
9
9
9
9
–
4
5
5
6
6
7
9
9
–
Cable stripping lengths for unipole connectors (E series)
straight plugs and sockets with oversize cable collet, clamping type K (solder contacts)
Connector
L
Series
Type
T
1E
S
2E
3E
4E
120
130
130
140
140
160
160
ø contact A
(mm)
M2
2.0
3.0
3.0
4.0
4.0
6.0
6.0
Cable stripping
lengths (mm)
L
M2
Solder
S
T
25
26
28
27
36
37
50
8
8
9
9
9
9
9
5
5
6
6
7
9
9
Cable stripping lengths for multipole connectors (E series)
M1
straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)
M3
elbow plugs (90°) with cable collet, clamping type C (solder or crimp contacts)
Series
0E
L
T
1E
S
Type
302
303/304
306
302
303/304
305
306
302
303/304/305/306
2E
307
308/310
www.lemo.com
Cable stripping lengths (mm)
ø contact A
(mm)
Connector
L
Solder
S
T
0.9
0.7
0.5
1.3
0.9
0.9
0.7
0.7
1.6
1.3
1.3
0.9
0.9
8
8
8
10
10
10
10
10
15
15
15
15
15
5
5
5
8
8
8
8
8
9
9
9
9
9
3.0
2.5
2.5
3.0
3.0
3.0
2.5
2.5
4.5
4.0
4.0
4.0
4.0
M1
M3
L
Crimp
S
T
12
12
–
15
15
15
15
15
19
19
19
19
19
5
5
–
8
8
8
8
8
9
9
9
9
9
4.0
4.0
–
4.0
4.0
4.0
4.0
4.0
5.5
4.0
4.0
4.0
4.0
L
Solder
S
T
L
Crimp
S
T
19
19
19
23
23
23
23
23
33
33
33
33
33
5
5
5
8
8
8
8
8
9
9
9
9
9
3.0
2.5
2.5
3.0
3.0
3.0
2.5
2.5
4.5
4.0
4.0
4.0
4.0
23
23
–
28
28
28
28
28
37
37
37
37
37
5
5
–
8
8
8
8
8
9
9
9
9
9
4.0
4.0
–
4.0
4.0
4.0
4.0
4.0
5.5
4.0
4.0
4.0
4.0
167
®
®
Cable stripping lengths for multipole connectors (E series)
straight plugs and sockets with cable collet, clamping type C (solder contacts)
M3
elbow plugs (90°) with cable collet, clamping type C (solder contacts)
Connector
Series
Type
302/303/304
3E
305
306/307/308/310
312/313/314/316/318
302
303/304
305
4E
306
307
308/309/310/312/314
316/318/320/322/324
302
303
L
304
T
305
306/308
310/312
S
5E
314
316
318
320
322
324
330/336/340/344/348
303
304
312
316/320/324
330/332
6E
336
340/348
360/362
364/372
106
168
ø contact A
(mm)
M1
Cable stripping lengths (mm)
M1
M3
Solder
Solder
L
S
T
L
S
T
2.0
2.0
1.3
1.3
0.9
4.0
3.0
3.0
2.0
2.0
2.0
1.3
1.3
0.9
6.0
6.0
4.0
4.0
4.0
3.0
3.0
2.0
3.0
2.0
2.0
3.0
1.6
1.6
3.0
1.6
1.6
1.3
6.0
8.0
5.0
3.0
2.0
1.3
5.0
2.0
1.6
1.3
0.9
18
18
18
18
18
23
23
23
23
23
23
23
23
23
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
70
70
70
70
70
70
70
70
70
70
70
9
9
9
9
9
9
9
9
9
9
9
9
9
9
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
30
30
30
30
30
30
30
30
30
30
30
5.0
5.0
4.0
4.0
4.0
7.0
6.0
6.0
5.0
5.0
5.0
4.0
4.0
4.0
9.0
9.0
7.0
7.0
7.0
6.0
6.0
7.0
6.0
7.0
7.0
6.0
4.5
4.5
6.0
4.5
4.5
4.0
9.0
10.0
8.0
6.0
7.0
4.0
8.0
7.0
4.5
4.0
4.0
39
39
39
39
39
50
50
50
50
50
50
50
50
50
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
9
9
9
9
9
9
9
9
9
9
9
9
9
9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5.0
5.0
4.0
4.0
4.0
7.0
6.0
6.0
5.0
5.0
5.0
4.0
4.0
4.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
www.lemo.com
®
®
Cable stripping lengths for multipole connectors (E series)
straight plugs and sockets with oversize cable collet, clamping type K (solder or crimp contacts)
Connector
Series
Type
302
303/304
1E
305
306
302
303/304/305/306
L
2E
T
307
308/310
302/303/304
S
3E
305
306/307/308/310
312/313/314/316/318
302
303/304
305
4E
306
307
308/309/310/312/314
316/318/320/322/324
www.lemo.com
Cable stripping lengths (mm)
ø contact A
(mm)
M2
L
Solder
S
T
L
Crimp
S
T
1.3
0.9
0.9
0.7
0.7
1.6
1.3
1.3
0.9
0.9
2.0
2.0
1.3
1.3
0.9
4.0
3.0
3.0
2.0
2.0
2.0
1.3
1.3
0.9
23
23
23
23
23
27
27
27
27
27
35
35
35
35
35
50
50
50
50
50
50
50
50
50
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
3.0
3.0
3.0
2.5
2.5
4.5
4.0
4.0
4.0
4.0
5.0
5.0
4.0
4.0
4.0
7.0
6.0
6.0
5.0
5.0
5.0
4.0
4.0
4.0
28
28
28
28
28
31
31
31
31
31
–
–
–
–
–
–
–
–
–
–
–
–
–
–
8
8
8
8
8
9
9
9
9
9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4.0
4.0
4.0
4.0
4.0
5.5
4.0
4.0
4.0
4.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
M2
169
®
®
Cable stripping lengths for multipole connectors (L series)
M1
straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)
M3
elbow plugs (90°) with cable collet, clamping type C (solder or crimp contacts)
Series
0L
L
T
1L
Type
302
303/304
302
303/304
305
306
302
303/304/305/306
S
2L
307
308/310
Cable stripping lengths (mm)
ø contact A
(mm)
Connector
L
Solder
S
T
0.9
0.7
1.3
0.9
0.9
0.7
0.7
1.6
1.3
1.3
0.9
0.9
10.5
10.5
12.5
12.5
12.5
12.5
12.5
18.0
17.0
17.0
16.0
16.0
6
6
7
7
7
7
7
8
8
8
8
8
3.0
2.5
3.0
3.0
3.0
2.5
2.5
4.5
4.0
4.0
4.0
4.0
M1
M3
L
Crimp
S
T
12.0
12.0
14.5
14.5
14.5
14.5
14.5
19.5
17.5
17.5
17.5
17.5
6
6
7
7
7
7
7
8
8
8
8
8
4.0
4.0
4.0
4.0
4.0
4.0
4.0
5.5
4.0
4.0
4.0
4.0
L
Solder
S
T
L
Crimp
S
T
23.5
23.5
29.0
29.0
29.0
29.0
29.0
37.5
36.5
36.5
35.5
35.5
6
6
7
7
7
7
7
8
8
8
8
8
3.0
2.5
3.0
3.0
3.0
2.5
2.5
4.5
4.0
4.0
4.0
4.0
25.0
25.0
31.0
31.0
31.0
31.0
31.0
39.0
37.0
37.0
37.0
37.0
6
6
7
7
7
7
7
8
8
8
8
8
4.0
4.0
4.0
4.0
4.0
4.0
4.0
5.5
4.0
4.0
4.0
4.0
Cable stripping lengths for multipole connectors (L series)
straight plugs and sockets with oversize cable collet, clamping type K (solder or crimp contacts)
Connector
Series
L
Type
302
303/304
T
1L
305
306
302
303/304/305/306
S
2L
307
308/310
170
ø contact A
(mm)
M2
1.3
0.9
0.9
0.7
0.7
1.6
1.3
1.3
0.9
0.9
Cable stripping lengths (mm)
M2
Solder
Crimp
L
S
T
L
S
T
26.5
26.5
26.5
26.5
26.5
31.0
30.0
30.0
29.0
29.0
8
8
8
8
8
10
10
10
10
10
3.0
3.0
3.0
2.5
2.5
4.5
4.0
4.0
4.0
4.0
28.5
28.5
28.5
28.5
28.5
32.5
30.5
30.5
30.5
30.5
8
8
8
8
8
10
10
10
10
10
4.0
4.0
4.0
4.0
4.0
5.5
4.0
4.0
4.0
4.0
www.lemo.com
®
®
Technical characteristics
Outer shell
Brass
Plastic materials
In most cases, LEMO connectors have a brass outer shell
which is suitable for most general purpose applications,
including civilian and military. The brass outer shells have
a chrome nickel-plated surface which ensures very good protection against industrial atmosphere, salt air and most corrosive agents.
Some connector model shells can be made of plastic. This
solution offers optimum electrical insulating properties particularly suitable for medical applications. Black Polyoxymethylene (POM) is particularly adapted to products of
the 00 or S series.
Grey or white polysulfone (PSU) and beige PEEK offers
excellent mechanical properties and is suitable for gas or vapour
sterilization.
Some models of the 2B and 3B series are available with an
outer shell of cream-coloured polyphenylsulfone (PPSU). We
recommend this material particularly for applications where
products are to withstand hundreds of vapour sterilization cycles.
Alternative protective coatings are available to satisfy other
specific environmental conditions:
– electrolytic nickel
– nickel-gold
– nickel-black chrome. After the black chrome treatment, the
part is coated with a protective organic film.
Stainless steel
For applications where there are severe environmental conditions that may rapidly damage the surface finish, we recommend using stainless steel. The AISI 303 stainless steel
is a material for general use adapted to most applications requiring a product made entirely of stainless metal.
For the nuclear industry where elements are subject to radiation and to vaporous nitric acid, we offer AISI 304 stainless
steel.
Grade AISI 316L is recommended for medical applications,
highly demanding with regard to non-corrosiveness. This material is also used for connector shells soldered by electronic
beam onto a device made of the same stainless steel.
These parts have no surface treatment.
Aluminium alloy
The aluminium alloy outer shells find numerous applications where light weight is a predominant factor; such as in
the aeronautics and space industries, and for portable and
mobile equipment.
These materials have high mechanical strength and excellent resistance to corrosion. The shell surface is protected
by anodizing which is available in six colours: blue, yellow,
black, red, green, and natural.
www.lemo.com
Bridge plug or plugs with parallel sockets are made of
polyamide (PA.6) available in 9 colours: blue, white, grey,
yellow, brown, black, red, orange and green.
Some elbow socket shells for printed circuits are overmoulded in polyphenilene sulfide (PPS).
Other metallic components
In general, most metallic components are manufactured in
brass. However, bronze or beryllium copper are used where
good elasticity is required (for example: earthing crown).
Depending on the application, these parts have electrolytic
nickel or nickel-gold plating.
These parts can also be manufactured in stainless steel.
Sealing gasket
In general, sealing gaskets are made of silicone rubber
MQ/MVQ. However, for vacuumtight sockets and couplers,
gaskets are made of fluorosilicone rubber (FPM).
Sealing resin
An epoxy resin is used to seal both watertight and vacuumtight
socket and coupler models.
171
®
®
Materials and Treatments
Material (Standard)
Component
Outer shell,
collet nut, conical nut
or notched nut and oversized collet
Earthing crown
Latch sleeve
Locking washer
Hexagonal or round nut
Other metallic components
O-ring and gaskets
Sealing resin
chrome
Cu Ni Cr
Brass (UNS C 38500)
0.5
Stainless steel (AISI 303, 304 or 316L)
Aluminium alloy (AA 6262A or AA 6023)
–
Aluminium alloy (AA 6262A or AA 6023)
POM (Delrin® or Ertacetal®), Polyoxymethylene, black
PEEK, Polyether ethercetone, beige
PSU (Udel®), Polysulfone, grey or white
PPSU (Radel®), Polyphenylsulfone, cream
PA.6 (Grilon®), Polyamid
PPS (Ryton®), Polyphenilene sulfide, brown
–
Bronze (UNS C 54400) or special brass
–
Beryllium Copper (UNS C 17300)
Stainless steel (AISI 416 or 316L)
0.5
Special brass
Stainless steel (AISI 416 or 316L)
Bronze (UNS C 52100)
–
Brass (UNS C 38500)
Stainless steel (AISI 303, 304 or 316L)
Aluminium alloy (AA 6262A or AA 6023)
Brass (UNS C 38500)
–
Stainless steel (AISI 303, 304 or 316L)
Silicone MQ/MVQ or FPM/FKM (Viton®)
Epoxy (Araldite® or Stycast®)
Notes:
standards for surface treatment are as follows:
– chrome-plated: SAE AMS 2460
– nickel-plated: SAE AMS QQ N 290, or MIL DTL 32119
– gold-plated: ISO 27874
– black chrome: MIL DTL 14538 with a minimum of 10 µm of lacquer
protection
1) anthracite colour (other colours upon request)
2) for FFP, PCP and ERN models of the 0S to 3S series
3) for FFP, PCP and ERN models of the 0S to 3S series and FGG and
ENG models of the 1B, 3B and 4B series
3
–
–
–
3
–
–
Surface treatment (µm)
nickel
gold
black chr. Notes
Cu Ni Cu Ni Au Ni Cr
0.3 0.5 3 0.5 3
without treatment
–
–
5
–
–
anodized
–
–
–
–
–
–
– 0.5 3 0.5 3
– 0.5 3 0.5 3
without treatment
0.3 0.5 3 0.5 3
without treatment
–
–
0.5
3
0.5
3
without treatment
anodized natural
0.5 3 0.5 3
without treatment
–
–
0.5
1
2
–
–
–
1)
2)
3)
4)
4)
5)
6)
1.0
1.0
–
–
–
–
0.5
–
–
7)
8)
9)
9)
0.5
–
–
10)
10)
0.5
–
–
11)
4)
5)
6)
7)
8)
9)
10)
for the FGY and ENY models of the 2B and 3B series
for bridge plugs of the B series
for S and B series elbow sockets for printed circuits
gold-plating for unipole types
used in 00 series free and fixed sockets and couplers
AISI 416 steel is used with shells made of AISI 303 or 304
delivered with free and fixed sockets with aluminium alloy or stainless
steel shell
11) FPM/FKM (Viton®) o-ring and gaskets are installed upon special
request. However standard for vacuumtight models.
Technical characteristics of plastic materials
Type
Density
Tensile strength (at 23°C)
Flexurale strength (at 23°C)
Dielectric strength
Volume resis. at 50% HR and 23°C
Surface resistivity
Thermal conductivity
Comparative tracking index
Maxi. continuous service temperature
Min. continuous service temperature
Max. short-time service temperature
Water absorption in 24h at 23°C
Radiation resistance
Flammability rating
Resistance to steam sterilization
Standard
Units
POM
ASTM D 792
–
1.4
ASTM D 638/ ISO R527 MPa
70-80
ASTM D 790/ ISO R178 MPA
–
ASTM D 149/IEC 60243 kV/mm
60
ASTM D 257/IEC 60093 Ω ● cm
1015
ASTM D 257
Ω
1013
ASTM C 177
W/K ● m 0.31
IEC 60112
V
CTI 600
UL 746
°C
90
UL 746
°C
-50
–
°C
140
ASTM D 570/ISO R62A
%
0.85
–
Gy1)
8x103
2)
ASTM D 635/UL 94
–
HB
–
–
bad
PEEK
1.3-1.4
92-142
170
19-25
1016
1015
0.25
CTI 150
250
-55
300
0.12
107
V-0/3.2
excel.
PSU
PPSU
PPS
PA.6
Silicone
1.24
1.3
1.67
1.14
~1.2
70
70
121
55
>9
106
91
179
75
–
17-20
15
17
35
18-30
5x1016
–
1016
1015
1014
–
–
–
–
–
0.26
–
0.3
–
–
CTI 150
–
CTI 200 CTI 600
–
140
180
220
80
200
-60
-50
-60
-40
-50
160
200
250
150
> 250
0.3
0.37
< 0.05
>3
–
105
–
> 107 5x103
105
V-0/4.4 V-0/1.6 V-0/5V
V-2
–
good
excel. excel.
bad
good
FPM
Epoxy
~1.9
1.58
> 12
16
–
24
–
15
–
1014
–
–
–
0.8
–
CTI>600
200
80
-20
-20
300
120
–
0.25
8x104 2x106
–
V-0/4
good
bad
Notes: 1) 1 Gy (Gray) = 100 rad. 2) Depends on material thickness (in mm).
ASTM = American Society for Testing Material
ISO = International Standards Organisation
172
UL
IEC
= Underwriters Laboratories
= International Electrotechnical Commission
www.lemo.com
®
®
Mechanical latching characteristics
Standard series
Fv
Force
(N)
Fv
Fd
Fa
Series
2C 2S 3S 4S 5S 6S
00 0S 1D 1S
9 14 14 15 12 17 20 40 60 70
7
9 11 10 12 11 14 25 40 55
120 140 300 250 400 350 500 650 750 900
Watertight series
Fd
Force
(N)
Fv
Fd
Fa
Series
2E 2L 3E 4E 5E 6E
0E 0L 1E 1L
14 14 16 16 20 20 32 65 85 100
9
9 10 10 13 13 25 40 60 75
250 250 300 300 400 400 550 700 800 900
Keyed series
Fa
Fv: average latching force.
Fd: average unmating force with axial pull on
the outer shell.
Fa: average pull force with axial pull on
the collet nut
Force
(N)
Series
00 0B 1B 2B 2G 3B 4B 5B
Fv
Fd
Fa
9 10 14 15 12 17 39 48
7
8 11 12 12 14 38 38
100 180 300 300 400 400 600 800
Keyed watertight series
Force
(N)
Fv
Fd
Fa
Series
0K 1K 2K 3K
4K 5K
14 16 20 32 65 85
9 10 13 25 40 60
250 300 400 550 700 800
Notes: 1N = 0.102 kg.
Notes: forces were measured on outer shells not fitted with contacts.
Mechanical endurance: 5000 cycles.
Mechanical endurance represents the number of cycles after which the latching system is still effective (1 cycle = 1 latching/unlatching at 300 cycles per
hour). The values were measured according to the standard IEC 60512-7 test 13a.
-30
100
-35
110
500 M
90
200 M
-25
50 M
100 M
80
20 M
-20
5M
70
10 M
-15
2M
60
500 K
1M
-10
200 K
50
50 K
-5
100 K
When selecting a connector, screen or shielding efficiency
and low resistance to electric continuity between the cable
and the connector should be considered.
The design of LEMO connectors with metal shell and earthing crown guarantee optimum shielding efficiency in all
applications where electromagnetic compatibility (EMC) is
critical.
The performance of a connector is measured through
shielding efficiency, a value that represents the ratio between
the electromagnetic field on the outside and the inside of the
shell. Our measurements are carried out according to the IEC
60169-1-3 standard.
40
20 K
a) reduce the emission of generated electromagnetic
disturbance to a level where radios and telecommunication
and other devices can properly function;
b) electromagnetic immunity against electromagnetic
disturbance so that they can properly function.
0
10 K
Electrical and electronic devices are to be designed to ensure
the following:
Transfer impedance
The electromagnetic compatibility of a device can only be
ensured by meeting a number of basic rules with the design
of the device and by carefully selecting components, cables
and connectors.
(dB)
30
Shielding efficiency
(dBOhm)
5
1G
Electromagnetic compatibility (EMC)
and shielding efficiency
(Hz)
Frequency
FGG + PHG.1B
FGG + PHG.1K
The performance of S and B series connectors is comparable to the results of measurements carried out on a pair
of FGG + PHG.1B connectors.
The performance of E and K series connectors is comparable to the results of measurements carried out on a pair
of FGG + PHG.1K connectors.
www.lemo.com
173
®
®
Shell electrical continuity:
(measured according to IEC 60512-2 test 2f)
R1 Values with earthing crown and latch sleeve or inner-sleeve nickelplated.
R2 Values with gold-plated earthing crown and nickel-plated latch sleeve
or inner sleeve.
Test current: 1A
A = Ammeter
mV = Millivoltmeter
G = Generator
Standard series
A
mV
G
Series
R1
(mΩ)
R2
(mΩ)
Series
R1
(mΩ)
R2
(mΩ)
00
0S
1D
1S
2C
3.5
2.8
2.5
2.2
–
2.8
1.6
1.1
1.5
–
2S
3S
4S
5S
6S
1.8
1.6
1.4
1.4
1.0
1.2
1.2
1.0
1.0
0.5
Series
R1
(mΩ)
R2
(mΩ)
Series
R1
(mΩ)
R2
(mΩ)
00
0B
1B
2B
3.5
3.5
2.5
2.2
2.8
1.3
1.1
0.9
2G
3B
4B
5B
–
2.2
1.5
1.5
–
0.7
0.5
0.3
Series
R1
(mΩ)
R2
(mΩ)
0E-0K-0L
1E-1K-1L
2E-2K-2L
3E-3K
4E-4K
5E-5K
6E
2.8
2.2
1.8
1.6
1.4
1.4
1.0
1.6
1.5
1.2
1.2
1.0
1.0
0.5
Keyed series
A
mV
G
Watertight series
Keyed watertight series
A
174
mV
G
www.lemo.com
®
®
Insulator
Plastic material used by LEMO for manufacturing insulators is selected according to the electric and thermal
properties required for the various connector types. Characteristics examined for the two connector types are:
– Dielectric strength;
– Comparative tracking index;
– Surface and volume resistivity;
– Continuous service temperature;
– Water absorption;
– Radiation resistance;
– Flammability rating
– Resistance to hydrocarbon.
Radiation resistance
PA 6.6
PEEK
PTFE
FEP
PI
103
rads
Gray (Gy) 101
104
102
105
103
106
104
107
105
108
106
Mechanical and Electrical Properties
Mechanical characteristics of thermoplastics, such as PA
6.6, and PEEK, are improved by the addition of glass
fibres. By adding glass fibres in the resin the performance
of this material (mechanical strength and radiation resistance) is enhanced and water absorption rate is reduced.
From an electric point of view, the addition of glass fibres
improves dielectric strength.
Selection of the insulator
A number of thermoplastics have common characteristics,
some of them are identical with other insulating materials.
In this case, the insulator material is selected according to
the specific difference in features to provide all the required
parameters for the given type.
Damage
109
1010
7
10
108
Radiation dose γ
Minimum to slight (almost available usable)
Slight to medium (often satisfactory)
Medium to serious (not usable)
Note: technical data in this chapter provide general information on plastics
used by LEMO as electrical insulators. LEMO reserves the right to propose
new materials with better technical characteristics, and to withdraw, without notice, any material mentioned in the present catalogue or any other
publications edited by LEMO S.A. and/or its subsidiaries. LEMO SA and
its subsidiaries use only plastic granules, powder or bars supplied by specialized companies, and thus cannot in any case take responsibility with regard
to this material.
Technical characteristics
Type
Standard
Dielectric strength
Volume resistivity at 50% RH and 23°C
Surface resistivity
Thermal conductivity
Comparative tracking index
Dielectric constant (106 Hz)
Dissipation factor (106 Hz)
Maximum continuous service temperature
Maximum short-time service temperature
Minimum continuous service temperature
Water absorption in 24h at 23°C
Radiation resistance
Flammability rating
ASTM D 149 / IEC 60243
ASTM D 257 / IEC 60093
ASTM D 257 / IEC 60093
ASTM C 177
IEC 60112
ASTM D 150 / IEC 60250
ASTM D 150 / IEC 60250
UL 746
–
–
ASTM D 570 / ISO R624
–
ASTM D 635 / UL 94
Units
PA6.6
PEEK
PTFE
FEP
PI
kV/mm
Ω ● cm
Ω
W/K ● m
V
–
–
°C
°C
°C
%
Gy
–
15-17
5.8x1015
1012
0.21
CTI 600
4
–
120
150
–
< 0.7
5x103
–
19-25
1016
1015
0.25
CTI 150
3.2-3.5
< 0.005
250
300
-55
< 0.3
107
V-0/3.2
17.2-24
1018
1017
0.23
CTI 500
2-2.1
< 0.0003
260
300
-200
< 0.01
2x102
V-0
20
> 1016
> 1016
0.24
–
2.1
< 0.001
200
260
-200
< 0.01
2x104
V-0
22
> 1016
> 1015
0.35
–
3.6
< 0.0034
350
480
–
0.24
106
–
Note: values of insulation resistance between contacts are given on page 177.
Designation
chemical
Polyamide (glass fitted)
Polyether Ethercetone
Polytetrafluorethylene
Tetrafluorethylene
Polyimide
commercial
Nylatron®
Peek®
–
–
Vespel®
Symbol
PA 6.6
PEEK
PTFE
FEP
PI
Standard
–
–
ASTM D 1457-83
ASTM D 2116-81
–
00
●
●
Unipole
S
E
●
●
●
●
00
S
E
Multipole
B K 2C 2G 1D
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● First choice alternative
● Special order alternative
www.lemo.com
175
®
®
Electrical contact
Technical description
The secure reliable electromechanical connection achieved
with LEMO female cylindrical contacts is mainly due to
two important design features :
1. Prod proof entry on the mating side which ensures perfect concentric mating even with carelessly handled connectors.
2. The pressure spring, with good elasticity, maintains a
constant even force on the male contact when mated. The
leading edge of the pressure spring preserves the surface treatment (gold-plated) and prevents undue wear.
Contact material and treatment
LEMO female contacts are made of bronze beryllium (QQC-530) or bronze (UNS C 54400). These materials are chosen because of their high modulus of elasticity, their excellent electrical conductivity and a high mechanical strength.
LEMO male solder and print contacts are made of brass (UNS
C 38500). Male crimp contacts are made of brass (UNS
C 34500) or annealed brass (UNS C 38500) with optimum
hardness (HV) for crimping onto the wire.
Type
Au
Ni
Cu
Male crimp
Bronze
or brass
Material (standard)
Surf. treatment (µm)
Cu
Ni
Au1)
0.5
3
1.0
Male print
Brass (UNS C 34500)
Brass (UNS C 38500)
Brass (UNS C 38500)
Female crimp
Female print
Bronze (UNS C 54400)
Cu-Be (FS QQ-C-530)
0.5
3
1.5
Clips
Cu-Be (FS QQ-C-530)
Stainless steel
–
–
–
Connection wire2)
Brass
–
33)
–
Notes: the standard surface treatment are as follows:
– nickel: SAE AMS QQ N 290 or MIL DTL 32119
– gold: ISO 27874.
1) minimum value
2) for elbow print contacts
3) treatment completed by 6 µm Sn (lead free) tin-plating
Thickness comparison between the outside
and the inside of female contacts
P
2.5
P
2.5
Note: P = inspection point
Gold thickness
female
Contact
øA
(mm)
male
(µm)
0.35
0.50
0.70
0.90
1.30
1.60
2.00
3.00
4.00
5.00
6.00
8.00
12.001)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
–
outside
(µm)
inside
(%)
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
–
65
65
70
75
75
75
75
75
75
75
75
75
–
Notes: 1) contacts are silver plated
176
www.lemo.com
®
Contact resistance with relation to the number
of mating cyles
(measured according to IEC 60512-2 test 2a)
®
Insulation resistance between the contacts
and contact/shell
(measured according to IEC 60512-2 test 3a)
Average values measured after the mating cycles and the
salt spray test according to IEC 60512-6 test 11f.
Aø
(mm)
0.35
0.5
0.7
0.9
1.3
1.6
2.0
Contact resistance (mΩ)
1000
cycles
3000
cycles
5000
cycles
8.0
7.5
5.6
4.1
2.8
2.9
2.6
–
8.3
5.7
4.2
2.9
3.1
2.7
–
8.7
6.1
4.8
3.6
3.5
3.3
Aø
(mm)
3.0
4.0
5.0
6.0
8.0
12.0
Contact resistance (mΩ)
1000
cycles
3000
cycles
5000
cycles
2.0
1.6
1.4
1.2
0.8
0.7
2.2
2.0
–
–
–
–
3.1
2.8
–
–
–
–
Insulating material
new
after humidity test1)
Multipole
PEEK
Unipole
PTFE
> 1012 Ω
> 1010 Ω
> 1012 Ω
> 1010 Ω
Note: 1) 21 days at 95% RH according to IEC 60068-2-3.
Solder contacts
The conductor bucket of these contacts is machined at an
angle to form a cup into which the solder can flow.
See page 7 for the range of cable dimensions that can be
soldered.
Crimp contacts
Advantages of crimping
The square form crimp method is used (MIL-C-22520F,
class I, type 2) photo 1 for unipole contacts.
– practical, quick contact fixing outside the insulator
– possible use at high temperature
– no risk of heating the insulator during the conductorcontact fixing
– high tensile strength
For multipole contacts the standard four identer crimp
method is used, MIL-C-22520F, class I, type 1), photo 2.
The crimp method requires a controlled compression to
obtain a symmetrical deformation of the conductor strand and
of the contact material. The radial hole in the side of the contact makes it possible to check whether the conductor is
correctly positioned within the contact. A good crimping is characterized by only slightly reduced conductor section and
practically no gap.
For optimum crimping of bronze or brass contacts they are
annealed to relieve internal stress and reduce material
hardening during the crimping process.
Only the crimping zone is annealed with the help of an
induction heating machine designed by the LEMO Research
and Development Department (see photo 3).
Crimp contacts are available in standard version (form 1) for
mounting maximum size conductors.
For some dimensions, these crimp contacts can be produced with reduced crimp barrels (form 2) for mounting
reduced size conductors.
1
2
3
Crimp contacts
The crimp contacts can be with two forms: a standard crimp
barrel for large conductors (see fig. 1) or with a reduced
crimp barrel for smaller conductors (see fig. 2).
Fig. 1
www.lemo.com
The range of cable dimensions that can be crimped into
our contacts are indicated on the table on page 7.
Fig. 2
177
®
®
Print contacts
Print contacts are available in straight or elbow versions
for certain connector types, mostly for straight and elbow socket
models. Connection is made on flexible or rigid printed circuits by soldering.
Straight print contacts are gold-plated which guarantees
optimum soldering, even after long-term storage. However
straight
for wave soldering, we recommend removal the gold-plating from the contact end on the printed circuit side before soldering according to the assembly procedures.
Print elbow contacts include a tinned lead free brass wire
crimped into a crimp contact.
elbow
Test voltage
Test voltage (Ue) :
(measured according to the IEC 60512-2 test 4a standard)
It corresponds to 75% of the mean breakdown voltage.
Test voltage is applied at 500 V/s and the test duration is 1
minute.
This test has been carried out with a mated plug and socket,
with power supply only on the plug end.
Operating voltage (Us) :
It is proposed according to the following ratio : Us = Ue
3
Caution:
For a number of applications, safety requirements for
electrical appliances are more severe with regard to
operating voltage.
In such cases operating voltage is defined according
to creepage distance and air clearance) between live parts.
Please consult us for the choice of a connector by indicating the safety standard to be met by the product.
Voltage values are given in the table on insulator types for
each series.
They correspond with values measured at sea level.
They are adapted to all applications up to an altitude of
2000 m.
In case a device is used at a higher altitude, air clearance
between live parts has to be multiplied by the following
coefficients.
It means also that test voltage has to be divided by this
coefficient.
altitude (m)
coefficient
2000
3000
4000
5000
1.00
1.14
1.29
1.48
Rated current
The current values are indicated in the table of insulator
types in each series.
For use at higher temperatures acceptable rated current
will be lower. It tends towards zero as the material is used
at the maximum operating temperature accepted for the
insulator.
In most case the current depend on the conductor dimension (see table on page 183) or on the printed circuit dimension.
Rated current (A)
100%
75%
50%
25%
for the insulator
The specified rated current can be applied simultaneously
to all the contacts.
It corresponds with an average temperature rise of 40°C of
the connector.
For connectors with PEEK insulator, maximum admissible
current will follow the curve below depending on the operating temperature T.
Maximum operating temperature
(measured according to IEC 60512-3 test 5a)
T (°C)
Caution:
In general, connectors should not be unmated while
live.
178
0
50
100
150
200
250
www.lemo.com
®
®
Cable fixing
Cables are fixed into LEMO connectors with cable collet systems. These collets with latches have a design which is very similar to those used for tool machines. This solution guarantees excellent cable retention and ensures perfectly symmetrical
deformation of the cable.
The 00 multipole series is also available with hexagonal crimping (MIL-C-22520F).
Material and treatment
Component
Material (standard)
Center piece
Collet
Crimp ferrule
Reducer
Reducing cone
Earthing cone
Metal washer
Brass (UNS C 38500)
Brass (UNS C 38500)
Copper (UNS C 18700)
Brass (UNS C 38500)
Brass (UNS C 38500)
Brass (UNS C 38500)
Brass (UNS C 38500)
Gasket
Silicone MQ/MVQ
FPM (Viton®)2)
Surface treatment (µm)
Gold
Nickel1)
Cu
Ni
Cu
Ni
Au
0.5
0.5
0.5
0.5
0.5
0.5
0.5
3
3
3
3
3
3
3
–
–
0.5
–
–
–
–
–
–
3
–
–
–
–
–
–
0.5
–
–
–
–
Notes:
1) standards for surface treatment are as follows:
– nickel-plated: SAE AMS QQ N 290.
2) available upon special request.
–
Cable clamping system
B series (D and M cable clamping)
See assembly instructions under www.lemo.com.
6
7
5
Type D
1
3
7
6
5
4
3
Type M
9
7
6
5
2
1
Plug and socket
➀ collet nut
➁ reducing cone
➂ collet
➃ reducer
➄ split insert carriers
➅ insulator + contacts
➆ housing subassy.
Elbow plug
➀ collet nut
➁ reducing cone
➂ collet
➃ reducer
➄ elbow outlet
➅ insert carrier
➆ insulator + contacts
➇ housing subassy.
➈ hex cap
8
www.lemo.com
179
®
®
K series (C and K cable clamping)
See assembly instructions under www.lemo.com.
7
6
5
1
7
6
Type C
4
3
2
1
5
9
7
8
6
1
Type K
8
6
7
5
4
3
Plug and socket
➀ collet nut
➁ collet
➂ flexible gasket
➃ earthing cone
➄ split insert carriers
➅ insulator + contacts
➆ housing subassy.
2
1
Elbow plug
➀ collet nut
➁ collet
➂ flexible gasket
➃ earthing cone
➄ split insert carrier
➅ elbow inner shell
➆ insulator + contacts
➇ hex cap
➈ housing subassy.
Plug and socket
➀ collet nut
➁ collet
➂ metal washer
➃ flexible gasket
➄ earthing cone
➅ split centre-pieces
➆ insulator + contacts
➇ housing subassy.
w. oversized back
S series (C, L and K cable clamping)
See assembly instructions under www.lemo.com.
1
2
3
5
6
Type K
1
7
6
F ●●
2
Type L*
1
6
7
4
1
2
6
Type C
5
P ●●
6
7
5
4
6
8
FLA
180
Plug and socket
➀ collet nut
➁ collet
➂ oversize collet
housing (type K)
➃ earthing
centre-piece (type C)
➄ split centre-pieces
(type K and C)
➅ insulator + contacts
➆ housing subassy.
Elbow plug
➀ collet nut
➁ collet
➃ threaded sleeve
➄ bracket
➅ insulator + contacts
➆ insulating sleeve
➇ housing subassy.
* «L» type collet does not allow to connect the screen to
the connector shell. It does not allow full EMC shielding.
www.lemo.com
®
®
E series (C and K cable clamping)
See assembly instructions under www.lemo.com.
8
1
Type K
9
4
5
6
7
Plug and socket
➀ collet nut
➁ collet
➂ metal washer
➃ flexible gasket
➄ earthing cone
➅ split centre-pieces
(type K)
➅ earthing
centre-piece (type C)
➆ oversize collet
housing (type K)
➆ earthing
centre-piece (type C)
➇ insulator + contacts
➈ housing subassy.
2
3
8
1
6
8
9
7
8
1
Type C
5
4
3
2
Elbow plug
➀ collet nut
➁ collet
➂ metal washer
➃ flexible gasket
➄ earthing cone
➅ split insert carrier
➆ elbow inner shell
➇ insulator + contacts
➈ hex cap
➉ housing subassy.
6
10
8
9
7
1
FLA
Maximum metal collet nut tightening torque
Standard series
0S
1D
1S
Series
2C 2S
0.25 0.5
1.5
1.5
2.5
00
Torque (Nm)
Watertight series
2.5
3S
4S
5S
6S
3
8
10
12
Keyed series
0L
1E
1L
0.7
0.7
0.8
0.8
2
2
4K
5K
5
8
3E
4E
5E
6E
3
5
8
12
Watertight keyed series
00
Torque (Nm)
Torque (Nm)
Series
2E 2L
0E
0B
0.25 0.5
1B
1.5
Series
2B 2G
2.5
2.5
3B
4
4B
7
5B
Torque (Nm)
10
0K
1K
Series
2K 3K
0.7
0.8
2
3
0E
0L
1E
1L
0.8
0.8
1
1
1.2
1.2
Series
2K 3K
4K
5K
3
5
1N = 0.102 kg
Maximum elbow plug hex cap tightening torque
Watertight series
Keyed series
00
Torque (Nm)
0.3
0B
0.6
1B
1
Series
2B 3B
1
1.5
4B
3
5B
Torque (Nm)
5
Series
2E 2L
3E
4E
5E
1.5
3
5
Watertight keyed series
Torque (Nm)
0K
1K
0.8
1
1.2
1.5
1N = 0.102 kg
Maximum plastic collet nut tightening torque 1)
00
Torque (Nm)
www.lemo.com
0S
1S
2S
Series
3S 1B
2B
3B
4B
0.15 0.45 0.50 0.50 1.00 0.50 0.50 1.00 1.50
Note:
For applications subject to strong vibration, we recommend fixing the collet nut with
epoxy resin. We recommend to tight to the maximum value. Optimal torque may
depend on cable jacket design.
1)
181
®
®
Technical tables
Table of American Wire Gauge
Construction
AWG
0
1
2
4
6
8
8
10
10
10
12
12
12 1)
12
14
14
14 1)
14
16 1)
16
16
16 1)
16
18 1)
18 1)
18
18
18
18
20 1)
20
20
20
20
22
22
22
24 1)
24
24
24
26
26
26
28 1)
28
28
30
30
32
32
34
36
38
40
182
Table of wire gauges according to IEC-60228 standard
ø wire max
Wire section
Strand
nb
AWG/
strand
(mm)
(in)
(mm2)
(sq in)
259
817
259
133
133
168
133
105
37
1
37
19
7
1
41
19
7
1
65
26
19
7
1
65
42
19
16
7
1
42
19
10
7
1
19
7
1
42
19
7
1
19
7
1
19
7
1
7
1
7
1
1
1
1
1
24
30
26
25
27
30
29
30
26
10
28
25
20
12
30
27
22
14
34
30
29
24
16
36
34
30
30
26
18
36
32
30
28
20
34
30
22
40
36
32
24
38
34
26
40
36
28
38
30
40
32
34
36
38
40
11.277
9.702
8.89
6.9596
5.5118
4.4450
4.3942
3.3020
2.9210
2.6162
2.3114
2.3622
2.5400
2.0828
2.0574
1.8542
2.0828
1.6510
1.5748
1.5748
1.4986
1.5494
1.3208
1.2700
1.2700
1.3208
1.2954
1.2700
1.0414
1.0160
1.0414
1.0160
0.9906
0.8382
0.8382
0.7874
0.6604
0.6604
0.6858
0.6350
0.5588
0.5588
0.5080
0.4318
0.4318
0.4064
0.3302
0.3302
0.2794
0.2794
0.2286
0.1693
0.127
0.1016
0.078
0.444
0.382
0.35
0.274
0.217
0.175
0.173
0.13
0.115
0.103
0.091
0.093
0.10
0.082
0.081
0.073
0.082
0.065
0.062
0.062
0.059
0.061
0.052
0.05
0.05
0.052
0.051
0.05
0.041
0.04
0.041
0.04
0.039
0.033
0.033
0.031
0.026
0.026
0.027
0.025
0.022
0.022
0.02
0.017
0.017
0.016
0.013
0.013
0.011
0.011
0.009
0.007
0.005
0.004
0.003
52.90
41.40
33.20
21.5925
13.5885
8.5127
8.6053
5.3204
4.7397
5.2614
2.9765
3.0847
3.6321
3.3081
2.0775
1.9413
2.2704
2.0820
1.3072
1.3174
1.2293
1.4330
1.3076
0.8234
0.8447
0.9627
0.8107
0.8967
0.8229
0.5320
0.6162
0.5067
0.5631
0.5189
0.3821
0.3547
0.3243
0.2045
0.2407
0.2270
0.2047
0.1540
0.1408
0.1281
0.0925
0.0887
0.0804
0.0568
0.0507
0.0341
0.0324
0.0201
0.0127
0.0081
0.0049
0.0820
0.0641
0.0514
0.0335
0.0211
0.0132
0.0133
0.0082
0.0073
0.0082
0.0046
0.0048
0.0056
0.0051
0.0032
0.0030
0.0035
0.0032
0.0020
0.0020
0.0019
0.0022
0.0020
0.0013
0.0013
0.0015
0.0013
0.0014
0.0013
8.2x10-4
0.0010
7.9x10-4
8.7x10-4
8.0x10-4
5.9x10-4
5.5x10-4
5.0x10-4
3.2x10-4
3.7x10-4
3.5x10-4
3.2x10-4
2.4x10-4
2.2x10-4
2.0x10-4
1.4x10-4
1.4x10-4
1.2x10-4
8.8x10-5
7.9x10-5
5.3x10-5
5.0x10-5
3.1x10-5
2.0x10-5
1.3x10-5
7.5x10-6
Conductor no
x Ø (mm)
196x0.40
7x2.14
125x0.40
7x1.72
1x4.50
80x0.40
7x1.38
1x3.60
84x0.30
7x1.50
1x2.76
56x0.30
7x0.86
1x2.25
50x0.25
7x0.68
1x1.78
30x0.25
7x0.52
1x1.4
32x0.20
7x0.43
1x1.15
42x0.15
28x0.20
1x1.0
28x0.15
16x0.20
1x0.80
7x0.25
1x0.60
14x0.15
7x0.20
18x0.10
14x0.10
21x0.07
14x0.10
Max Ø
(mm)
Max Ø
(in)
Section
(mm2)
Section
(sq in)
7.50
6.10
6.00
4.90
4.50
4.70
3.95
3.60
3.70
3.15
2.76
2.80
2.58
2.25
2.15
2.04
1.78
1.60
1.56
1.40
1.35
1.29
1.15
1.20
1.15
1.00
0.95
0.90
0.80
0.75
0.60
0.75
0.65
0.50
0.40
0.40
0.40
0.295
0.240
0.236
0.192
0.177
0.155
0.155
0.141
0.145
0.124
0.108
0.110
0.098
0.082
0.084
0.080
0.070
0.062
0.061
0.055
0.053
0.050
0.045
0.047
0.045
0.039
0.037
0.035
0.031
0.029
0.023
0.029
0.023
0.019
0.015
0.015
0.015
25.00
25.00
16.00
16.00
16.00
10.00
10.00
10.00
6.00
6.00
6.00
4.00
4.00
4.00
2.50
2.50
2.50
1.50
1.50
1.50
1.00
1.00
1.00
0.75
0.75
0.75
0.50
0.50
0.50
0.34
0.28
0.25
0.22
0.14
0.11
0.09
0.09
0.0387
0.0387
0.0248
0.0248
0.0248
0.0155
0.0155
0.0155
0.0093
0.0093
0.0093
0.0062
0.0062
0.0062
0.0038
0.0038
0.0038
0.0023
0.0023
0.0023
0.0015
0.0015
0.0015
0.0011
0.0011
0.0011
7.7x10-4
7.7x10-4
7.7x10-4
5.2x10-4
4.3x10-4
3.8x10-4
3.4x10-4
2.1x10-4
1.7x10-4
1.3x10-4
1.3x10-4
Note: 1) not included in the standard
www.lemo.com
®
®
Maximum current rating for conductor
Maximum current on insulated conductors up to an ambiant temperature of 30° C (from VDE 0100, parts 430 and 532 as well
as other VDE regulations).
Nominal
section
mm2
Group 2
Intens.
max. A
Group 3
Intens.
max. A
0.08
0.14
0.25
0.34
0.50
0.75
1.00
1.50
2.50
1.0
2.0
4.0
6.0
9.0
12.0
15.0
18.0
26.0
1.5
3.0
5.0
8.0
12.0
15.0
19.0
24.0
32.0
Group 2 Multi-conductor, e. g. solid cable under sheath, shielded cable, lead-sheath cables, …
Group 3 Single conductor and single conductor cable laid on open air in a way to leave at least a
space between them equal to their diameter
Some formulae
Resistance R of a conductor: R = ρ
Impedance of coaxial line:
Z =
●
l
[Ω]
A
Where: ρ = conductor resistivity
l = conductor length
A = conductor cross-section
D
138
log [Ω]
√εr
d
εr = dielectric constant
D = dielectric outer diameter
d = center conductor outer diameter
●
Signal attenuation: Attenuation = 20 log
●
U1
[dB]
U2
U1 = input signal voltage
U2 = output signal voltage
Conversion of some units:
millimeters into inches:
1 mm = 0.0394 in
inches into millimeters:
1 in = 25.4 mm
centimeters into feet:
1 cm = 0.0328 ft
feet (12 in) into centimeters:
1 ft = 30.48 cm
square centimeters into square inches:
1 cm2 = 0.155 sq in
square inches into square centimeters:
1 sq in = 6.4516 cm2
bar into pounds per square inch:
1 bar = 14.51 psi
bar into Pascal:
1 bar = 105 Pa
°C into °F:
°F = °C 1.8 + 32
●
newtonmeter (Nm) into inch pound (in lb)
●
mbar l s-1 into Torr l s-1
●
●
www.lemo.com
●
●
1 Nm = 8.85 in lb
●
1 mbar l s-1 = 1.33 Torr l s-1
●
●
●
●
183
®
®
Product safety notice
PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND
INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.
IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS
SITUATIONS.
1. SHOCK AND FIRE HAZARD
Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue
(such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.
Mated components should never be disconnected while live as this may result in an exposed electric arc and local
overheating, resulting in possible damage to components.
2. HANDLING
Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect
components should be rejected or returned to the factory for verification.
Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used
during installation and / or assembly in order to obtain safe and reliable performance.
3. USE
Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general
conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to
eliminate all risk of transmission of such voltages to any exposed metal part of the connector.
4. TEST AND OPERATING VOLTAGES
The maximum admissible operating voltage depends upon the national or international standards in force for the
application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the
catalog however these may be influenced by PC board design and / or wiring harnesses.
The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the
test duration is 1 minute.
5. CE MARKING
CE Marking is applied to a complete product or device, and implies that the device complies with one or several European
safety directives.
CE Marking can not be applied to electromechanical components such as connectors.
6. PRODUCT IMPROVEMENTS
The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior
notification.
184
www.lemo.com
工商网监
湘ICP备2023018690号
