HPM-02-02-T-S-RA

REVISION Y DO NOT SCALE FROM THIS PRINT HPM-XX-XX-XX-X-XX-X NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005[0.13] 3. MAXIMUM PIN ROTATION IN BODY: 2° 4. TAILS TO BE SHEARED TO ACHIEVE DIMENSIONAL CALLOUT ±.010[0.25] 5. MINIMUM PUSHOUT FORCE: 3 LBS. 6. MAXIMUM ALLOWABLE BURR: .0015[0.038] 7. THROUGH HOLES (-S & -RA) ARE TO BE BULK PACKAGED. 8. SURFACE MOUNT (-VS) IS TO BE PACKAGED AS FOLLOWS: POSITIONS -04 THRU -20 ARE TO BE TUBE PACKAGED; POSITION -02 TO BE LAYER PACKAGED, -03 POSITION TO BE TUBE OR LAYER PACKAGED. 9. MAXIMUM CUT FLASH: .020[0.51] 10. COPLANARITY (-VS); POSITIONS -02 THRU -15: .008[0.20], POSITIONS -16 THRU -20: .010[0.25] OPTION -P: PICK PLACE PAD (USE PPP-47) (-VS ONLY, 3 POS MIN, NOT AVAILABLE IN -05 LEAD STYLE) No OF POSITIONS -01 THRU -20 LEAD STYLE SEE TABLE 1 OPTION -RA: RIGHT ANGLE POST (-02 & -04 LEAD STYLE ONLY) -VS: VERTICAL SURFACE MOUNT (-01 & -02 LEAD STYLE ONLY) (2 POSITION MINIMUM) PLATING SPECIFICATIONS -T: MATTE TIN CONTACT AND TAIL -TM:MATTE TIN CONTACT AND TAIL (No OF POS X .20[5.1]) ROW SPECIFICATION -S: SINGLE SEE TABLE 2 (No OF POS-1)X.200[5.08] .100 2.54 REF TABLE 2 BODY FORM .250 6.35 REF T/H FSW-20-200 RA FSW-20-200 VS HFSW-20-200 BLACK, PBT, UL 94 VO .125 3.18 REF .045 1.14 SQ REF MATERIAL NATURAL, LCP, UL 94 VO 2 MAX SWAY (EITHER DIRECTION) 90° C "B" C (SEE NOTE 2) "E" "C" +4° 90° - 0° "A" REF (SEE NOTE 4 & 6 FOR -05 LEAD STYLE) .100 2.54 REF T-1S8-XX-XX .200 5.08 SEE NOTE 10 "D" REF .04 1.02 2 MAX SWAY (EITHER DIRECTION) ANGLES .XX: .01 [0.3] 2 .XXX: .005 [0.13] .XXXX: .0020 [0.051] MATERIAL: -02 & -04 ONLY -01 & -02 ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS -RA: RIGHT ANGLE -VS: SURFACE MOUNT -S: SINGLE * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING BODY: SEE TABLE 2 TERMINAL: CDA7025 GRADE TL02 MAX BOW ALLOWED: .003 IN/IN F:\DWG\MISC\MKTG\HPM-XX-XX-XX-X-XX-X-MKT.SLDDRW SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DWG. NO. .200 HIGH POWER BLOCK, ASM HPM-XX-XX-XX-X-XX-X BY: BURRES 08/21/98 SHEET 1 OF 2 REVISION Y NOTE: "R"=No OF POS X .200[5.08] REF "S"= {("R" -.450[11.43])/2}±.020[.51] "G"= POST HEIGHT +.050[1.27] REF "R" "S" "B" "E" "G" .300 7.62 REF .213±.010 (SEE NOTES 4 & 6) .450 11.43 PPP-47 REF IN-PROCESS -VS -P: PICK & PLACE PAD OPTION (-VS ONLY, 3 POS MIN) (NOT AVAILABLE IN -05 LEAD STYLE) PT-1-24-01-67 TP-13 -VS 01 20 PT-1-24-01-67 IN-PROCESS -RA TP-13 -VS-P PACKAGING VIEW (SEE NOTE 7 & 8) * PROPRIETARY NOTE DO NOT SCALE DRAWING SHEET SCALE: 1:1 F:\DWG\MISC\MKTG\HPM-XX-XX-XX-X-XX-X-MKT.SLDDRW * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DWG. NO. .200 HIGH POWER BLOCK, ASM HPM-XX-XX-XX-X-XX-X BY: BURRES 08/21/98 SHEET 2 OF 2