M2DV-1D82D

CERT IFIC AT E OF COM PLI ANCE Certificate Number Report Reference Issue Date Issued to: This is to certify that representative samples of 20160822-E332730 E332730-20160818 2016-AUGUST-22 SHANGHAI AMP-MOONS AUTOMATION 168 Ming Jia Rd, Minhang District Shanghai, 201107 CHINA COMPONENT - POWER CONVERSION EQUIPMENT Refer to addendum page for Models/Product Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL 61800-5-1 - standard for Adjustable Speed Electrical Power Drive Systems - Part 5-1: Safety Requirements – Electrical, Thermal and Energy C22.2 No. 274-13 - standard for Adjustable Speed Drives See the UL Online Certifications Directory at www.ul.com/database for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ Page 1 of 2 CERT IFIC AT E OF COM PLI ANCE Certificate Number Report Reference Issue Date 20160822-E332730 E332730-20160818 2016-AUGUST-22 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. USR, CNR – Open Type Power Conversion Equipment. Models Type M2DV Series, followed by 1D8, 3D0 or 4D5, followed by 1 or 2, followed by S, Q, R, C, D, EC, E or IP. Type SV2 Series, followed by A or B, followed by 2, 3 or 5, followed by P, S, Q, C or IP, followed by A, R, C, D, E or N Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ Page 2 of 2