BC-2404

REVISIONS PART NO. BC-2404 ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE - A RELEASED Asha 26/11/11 Veena 26/11/11 APPRVD DATE 10/12/11 Specification: Material : 0.25 mm thick phosphorus bronze Nickel plated PCB Mounting Layout Dimensions : Millimetres General Tolerance Dimension : 0 ±0.3 0 ±0.2 Angle : ±3° 0 ±0.1 Part Number Table Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011. Description Part Number Retainer Clip, 24 mm, SMT BC-2404 TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWN BY: Asha CHECKED BY: www.element14.com www.farnell.com www.newark.com DATE: 26/11/11 DATE: Veena 26/11/11 APPROVED BY: DATE: 10/12/11 DRAWING TITLE: Retainer Clip SIZE A DWG NO. SCALE: NTS M10002762 U.O.M.: mm REV ELECTRONIC FILE BC 2404_DWG SHEET: 1 A OF 1