PS-250

PS CONNECTOR Connectors for tabs Specifications ––––––––––––––––––– • Secure locking, easy insertion • Stable contact performance • Mis-insertion prevention mechanism and housing lance • Tab mis-mating prevention mechanism (Short housing type) • The product compatible with glow wire is also available for short housing type. • Current rating: 25 A AC, DC (#250 Tab /AWG #10) • Voltage rating: 250 V AC, DC • Temperature range: -40˚C to +105˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/ 3 mΩ max. After environmental tests/ 6 mΩ max. • Insulation resistance: 1,000 MΩ min. • Withstanding voltage: 2,000 VAC/minute • Applicable wire: #110...AWG #24 to #16 #187...AWG #26 to #14 #205...AWG #22 to #14 Standards –––––––––––––––––––– 0 #250...AWG #22 to #10 • Applicable Tab: #110 Tab 0.5 mm thick #187 Tab 0.5 mm/ 0.8 mm thick #205 Tab 0.5 mm/ 0.8 mm thick #250 Tab 0.8 mm thick * Contact JST when you use the glow wire correspondence product of PS-250-G (Short housing type). * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Recognized E60389 1 Certified LR20812 2 R9850196 Contact #110 Series SPS-01T-110 3.7 3.7 SPS-41T-110 17.2 17.2 5.7 2.5 5.7 1.75 SPS-82T-187 (for 0.5 mm thick tabs) 5.6 SPS-51T-187 (for 0.5 mm thick tabs) 5.6 5.6 (for 0.5 mm thick tabs) 17.2 17.2 6 6.1 0.8 3.2 1.7 2.2 (for 0.8 mm thick tabs) SFPS-41T-187 SFPS-41T-187-8 (for 0.5 mm thick tabs) (for 0.8 mm thick tabs) 6.8 5.6 SPS-51T-187-8 (for 0.8 mm thick tabs) 5.6 7.7 6.4 1.6 2.2 2.5 SPS-01T-187-8 17.2 2.5 1.5 1.6 6.3 13.9 2.2 2.5 6.1 6.4 8 7.6 0.9 6.2 6.4 8 17.2 2.2 18.8 6.4 1.5 2.2 2.5 0.9 6.8 6.4 7.6 0.9 1 1.75 1.8 #187 Series SPS-01T-187 0.9 2.5 6 1.8 6 1 14.7 6.3 13.9 1 14.7 PS CONNECTOR Contact #205 Series SPS-21T-205-5 SPS-21T-205 SPS-51T-205 (for 0.5 mm thick tabs) 6.5 (for 0.8 mm thick tabs) 6.5 6.5 (for 0.8 mm thick tabs) 17.3 17.3 17.3 6.4 6 6.4 6 1.5 6 2.5 1.5 1.5 2.6 2.8 2.5 2.8 2.5 6.4 #250 Series SPS-21T-250 7.6 7.6 7.6 20.8 20.8 6.4 7.4 3.2 0.9 20.8 6.4 7.4 2 6.4 7.4 3.2 2.8 2.8 0.9 2 3.2 2 2.8 0.9 SPS-91T-250 SPS-61T-250 SPS-21T-250R SPS-61T-250R 7.6 7.6 7.6 0.9 6.4 3.2 2 7.4 7.4 2 0.9 6.4 3.2 1.9 2.8 7.4 2.8 6.4 3.2 2.8 20.8 20.8 20.8 0.9 SPS-91T-250R 2 PS CONNECTOR Contact #250 Series SFPS-61T-250 8.8 7.8 11.5 12.5 7.8 8.7 16.5 17.9 17.9 8.3 2.6 2.6 3.2 7.6 7.6 SPS-91T-250S 20.8 20.8 0.9 0.9 7.4 7.8 3.2 2 7.4 7.8 3.2 2.8 2 2.8 7.4 3.2 2.8 2.8 2.8 7.6 SPS-61T-250S 7.8 3.2 2.8 3.2 16.9 17.9 17.9 20.8 3 7.6 8.3 #250S Series SPS-21T-250S 0.9 6.4 6.4 6.4 0.9 7.6 8.3 2.6 SFPS-91T-250H SFPS-61T-250H 16.9 SFPS-21T-250H 7.6 18.7 1 0.9 17.2 0.9 1 16.9 10 9.05 SFPS-91T-250 2 PS CONNECTOR Contact Q'ty/reel 24∼20 1.0∼2.5 10,000 20∼16 1.9∼3.4 10,000 0.13∼ 0.5 26∼20 1.3∼3.4 10,000 SPS-51T-187 0.5 ∼ 2.0 20∼14 1.9∼3.6 7,500 *SPS-82T-187 0.75+0.75∼1.25+1.25 18+18∼16+16 2.1+2.1∼2.9+2.9 3,500 Model No. #110 for 0.5 mm thick tabs #187 #187 flag #205 Applicable wire Insulation O.D.(mm) Series mm2 AWG # SPS-01T-110 0.21∼ 0.5 SPS-41T-110 0.5 ∼ 1.31 SPS-01T-187 for 0.8 mm thick tabs SPS-01T-187-8 0.13∼ 0.5 26∼20 1.3∼3.4 10,000 SPS-51T-187-8 0.5 ∼ 2.0 20∼14 1.9∼3.6 7,500 for 0.5 mm thick tabs for 0.8 mm thick tabs for 0.8 mm thick tabs for 0.5 mm thick tabs for 0.8 mm thick tabs SFPS-41T-187 0.3 ∼ 1.25 22∼16 1.7∼3.4 5,000 SFPS-41T-187-8 0.3 ∼ 1.31 22∼16 1.7∼3.4 5,000 SPS-21T-205 0.3 ∼ 0.75 22∼18 1.5∼3.1 5,000 SPS-21T-205-5 0.3 ∼ 0.75 22∼18 1.5∼3.1 5,000 SPS-51T-205 0.5 ∼ 2.0 20∼14 1.9∼3.6 5,000 SPS-21T-250 0.3 ∼ 0.75 22∼18 1.5∼3.1 5,000 SPS-21T-250R 0.3 ∼ 0.75 22∼18 1.5∼3.1 3,500 SPS-61T-250 0.75∼ 2.0 18∼14 2.1∼3.9 5,000 SPS-61T-250R 0.75∼ 2.0 18∼14 2.1∼3.9 3,500 SPS-91T-250 2.0 ∼ 5.5 14∼10 3.0∼4.7 4,000 SPS-91T-250R 2.0 ∼ 5.5 14∼10 3.0∼4.7 3,500 SFPS-61T-250 0.75∼ 2.0 18∼14 2.1∼3.9 3,000 SFPS-91T-250 3.5 ∼ 5.5 12∼10 4.0∼5.2 2,000 SFPS-21T-250H 0.3 ∼ 0.75 22∼18 1.5∼3.1 1,300 SFPS-61T-250H 0.75∼ 2.0 18∼14 2.1∼3.9 1,300 SFPS-91T-250H 2.0∼5.5, 1.25+1.25 ∼2.0+2.0 14∼10, 16+16∼14+14 3.5∼7.2, 1.75+1.75 ∼3.6+3.6 1,300 #250 #250 flag #250S SPS-21T-250S 0.3 ∼ 0.75 22∼18 1.5∼3.1 5,000 SPS-61T-250S 0.75∼ 2.0 18∼14 2.1∼3.9 5,000 SPS-91T-250S 2.0 ∼ 5.5 14∼10 3.0∼4.7 4,000 Material and Finish Brass, tin-plated (reflow treatment) RoHS compliance ¨ V standards. Note: *Marked product is not approved by CSA/TU Contact Crimping machine MK-L-SPS SPS-01T-110 ― MK-L-SPS SPS-41T-110 ― MK-L-SPS SPS-01T-187（-8） ― MK-L-SPS SPS-51T-187（-8） ― MK-L-SPS SPS-82T-187 AP-K2N SFPS-41T-187（-8） SPS-21T-205（-5） SPS-51T-205 SPS-21T-250（S） SPS-21T-250R Applicator Crimp applicator ― MKF-L-PS187 ― MK-L-SPS ― MK-L-SPS ― MK-L-SPS ― MK-L-SPS ― Dies Crimp applicator with dies MK/SPS-01-110 APLMK SPS01-110 ― ― MK/SPS-41-110 APLMK SPS41-110 ― ― MK/SPS-01-187 APLMK SPS01-187 ― ― MK/SPS-51-187 APLMK SPS51-187 ― ― MK/SPS-82-187 APLMK SPS82-187 ― ― MK/SFPS-41-187 APL SFPS41-187 ― ― MK/SPS-21-205 APLMK SPS21-205 ― ― MK/SPS-51-205 APLMK SPS51-205 ― ― MK/SPS-21-250 APLMK SPS21-250 ― ― Contact Crimping machine MK-L-SPS SPS-61T-250（S） ― MK-L-SPS SPS-61T-250R ― MK-L-SPS SPS-91T-250（S） ― MK-L-SPS SPS-91T-250R SFPS-61T-250 SFPS-91T-250 SFPS-21T-250H SFPS-61T-250H SFPS-91T-250H Applicator Crimp applicator ― AP-K2N MKF-L-PS250 ― Dies Crimp applicator with dies MK/SPS-61-250 APLMK SPS61-250 ― ― MK/SPS-61-250R APLMK SPS61-250R ― ― MK/SPS-91-250 APLMK SPS91-250 ― ― MK/SPS-91-250R APLMK SPS91-250R ― ― MK/SFPS-61-250 APL SFPS61-250 ― ― MKF-L-PS9250 MK/SFPS-91-250 APL SFPS91-250 ― ― ― MKS-L-RASRSF MK/SFPS-21-250H APLMK SFPS21-250H ― ― ― MKS-L-RASRSF MK/SFPS-61-250H APLMK SFPS61-250H ― ― ― MKS-L-RASRSF MK/SFPS-91-250H APLMK SFPS91-250H ― ― ― MK/SPS-21-250R APLMK SPS21-250R ― ― 4 PS CONNECTOR Housing 5 5.3 6 7 #110 Series PS-110 1.7 20 #187 Series PS-187 5.1 2 24.5 10 5 2 24.5 17.4 PS-187-2A-15 5.1 6.1 7.1 5.1 6.1 7.1 PS-187-2A-14 14 15 5 2 21.4 22.4 24.5 17.8 5 5 2 24.5 6.1 7.1 5.1 PS-187-2A-17.8 25.1 6.1 7.1 5.1 7.5 8.5 PS-187-2A-10 5 2 24.5 PS CONNECTOR Housing #187 Series 12.25 6.75 13 11.5 6 2 13.75 PS-187-2B-6.75 PS-187-2B 2 26.1 26.1 PS-187-4B PS-187-2B1 3.4 24.3 34.1 1.4 16.4 1.5 2 6.6 26.1 22.7 24.5 5.6 5.6 6 11.5 7.8 17 7.5 PS-187-2V PS-187-3V 43 43 11.5 6.65 6 11.8 5.3 6.65 18.2 29.5 29.5 25.8 25.8 5 7.8 7.8 5 PS-187-2B1-8-H PS-187-8-H 3.4 1.4 34.1 17 6 11.5 16.55 8.5 7.5 24.5 2 5.1 26.1 2 6 PS CONNECTOR Housing #250 Series PS-250-2B 9 11 9 10 9 PS-250-A 11 PS-250 27.8 27.8 27.8 2.4 12 8 5 2.4 15.8 15.5 7.95 7.52 9.4 7.52 2.4 PS-250-2A-15 PS-250-GL (Thin type) PS-250-G (-WGJ2) 24 27.8 5 2.4 15 #250S Series 9 11 NPS-250-A 27.8 2.4 7.52 9.4 8 13 22 6.5 7.5 7.5 8.5 9.55 22 7 10 9 9 10 22 PS CONNECTOR Housing One-touch sleeve FPS-187 FPS-250 12 6.6 12 7.8 6 8 4.7 6 8 5.2 6.4 7 2.1 7 14.5 12 5 7 2.1 5 10 14.5 11 17 6 8 11 R2 #187 Model No. 19.9 3.5 1 Q'ty/bag PS-110 1,000 PS-187 1,000 Applicable terminal SPS-01T-110, SPS-41T-110 PS-187-2A-10 500 PS-187-2A-14 500 PS-187-2A-15 500 PS-187-2A-17.8 500 SPS-01T-187 PS-187-2B 500 SPS-51T-187 PS-187-2B-6.75 500 SPS-82T-187 PS-187-2B1 500 PS-187-4B 500 PS-187-2V 500 PS-187-3V 500 * PS-187-8-H * PS-187-2B1-8-H PS-250 #250 7.4 6.6 17.5 6 3.2 1 Series #110 1.5 1.8 5.4 R2 1,000 SPS-01T-187-8 500 SPS-51T-187-8 1,000 PS-250-A 500 PS-250-2B 500 PS-250-2A-15 500 SPS-21T-250 SPS-61T-250 SPS-91T-250 PS-250-G 1,400 SPS-21T-250R PS-250-GL 1,400 SPS-61T-250R PS-250-G-WGJ2 (Compatible with glow wire) 1,400 SPS-91T-250R NPS-250-A 1,000 SPS-21T-250S #250S SPS-61T-250S SPS-91T-250S One-touch sleeve * FPS-187 * FPS-250 500 SFPS-41T-187 500 SFPS-61T-250 Material and Finish PA 66, UL94V-0, natural (white) UL94V-0, gray PA 6, UL94V-2, natural (white) (Compatible with glow wire) RoHS compliance Note: FPS-187 and FPS-250 are UL recognized with File No. E55167 and CSA cirtified with File No. LR83372, but not TÜV approved. 8 PS CONNECTOR Applicable tab #187 (for 0.8 mm thick tabs) (for 0.5 mm thick tabs) 6.35±0.15 0.9 3.2±0.1 9±0.13 C1 4.75±0.1 2゜ ＋ ゜ °−1 2゜ ＋ ゜ °−1 #205 #250 (for 0.5 mm thick tabs) (for 0.8 mm thick tabs) 6.35±0.15 0.9±0.1 10 φ1.65 ＋0.1  0 2.2MIN 2゜ ＋ ゜ °−1 Note: 1. Contact JST when using PS connector for Micro-switch. 2. Make sure there are no unneeded ribs or other protuberances on tab surfaces. 3. Use the brass product for material. 4. Contact JST when using PS-187-4B. 6.35±0.1 7.4MIN 5.2±0.1 6.3 MIN 2.2 MIN φ1.65 ＋0.1  0 2゜ ＋ ゜ °−1 10 2゜ ＋ ゜ °−1 C1 ±0.1 C1±0.1 10 φ1.65 ＋0.1  0 0.5±0.025 2.2MIN 5.2±0.1 6.3 MIN C1±0.1 0.9±0.1 0.8 3.2±0.1 3.4±0.1 ±0.025 0.9±0.1 0.8±0.025 3.2±0.1 (for 0.8 mm thick tabs) 8±0.15 6.35±0.15 9 φ1.3＋0.2 0 10 10 2MIN φ1.3 ＋0.1  0 10 2゜ ＋ ゜ °−1 0.5±0.025 2 MIN C1±0.1 ±0.1 0.5±0.025 2.8±0.1 3.5 MIN φ1.2±0.1 5.4 MIN 0.5±0.1 7.4±0.1 0.9±0.1 3.2 ±0.1 ±0.1 5.4MIN 6.35 ±0.15 4.75±0.13 (for 0.5 mm thick tabs) 0.8±0.025 #110