PJ73AL90SQ

PJ73ALXXSQ Series Low Dropout Regulators Description SOT-89 The PJ73ALXXSQ series is a set of three-terminal low power high voltage regulators implemented in CMOS technology. They allow input voltages as high as 20V. They are available with several fixed output voltages ranging from 2.1V to 9.0V. Because of the low power dissipation, PJ73ALXXSQ are 1.GND 2.VIN 3.VOUT widely used in a variety of equipment such as audio device, video device, communication device Block Diagram and so on. VIN Features  Low power consumption  Low voltage drop  Low temperature coefficient  High input voltage (up to 20V)  Quiescent current : 1.5μA  Output voltage tolerance: ±2%  HAF(halogen and antimony free) is acquired Selection Tablet Designator XX www.pingjingsemi.com Revision:1.1 Oct-2019 VOUT Vref GND PJ73ALXXSQ Symbol Description 21 2.1V(output) 23 2.3V 25 2.5V 28 2.8V 30 3.0V 33 3.3V 36 3.6V 40 4.0V 44 4.4V 50 5.0V 90 9.0V 1 / 11 PJ73ALXXSQ Series Low Dropout Regulators Absolute Maximum Ratings Note1 Ratings at 25℃ ambient temperature unless otherwise specified. Parameter Limit Unit Supply voltage -0.3 ~ +22 V Storage temperature range -50 ~ +125 ℃ -40 ~ 85 ℃ Operating temperature range Note: 1.Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those conditions is not implied. Exposure to absolutemaximum-rated conditions for extended periods may affect device reliability. Parameter Symbol Value Unit RθJA 200 ℃/W PD 500 mW Junction-to-Ambient Thermal Resistance Power Consumption Electrical Characteristics PJ73AL21SQ(TA=25℃) Parameter Symbol Test conditions Min. Typ. Max Unit 2.058 2.10 2.142 V 300 -- -- mA VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA Output current IOUT VIN=VOUT+2.0V Load regulation ΔVOUT Voltage drop Note2 VDIF IOUT=10mA，ΔVOUT=2% -- 45 55 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V www.pingjingsemi.com Revision:1.1 Oct-2019 VIN=VOUT+2.0V, IOUT=10mA， 2 / 11 PJ73ALXXSQ Series Low Dropout Regulators PJ73AL23SQ(TA=25℃) Parameter Symbol Test conditions Min. Typ. Max Unit 2.254 2.30 2.346 V 300 -- -- mA VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA Output current IOUT VIN=VOUT+2.0V Load regulation ΔVOUT Voltage drop Note2 VDIF IOUT=10mA，ΔVOUT=2% -- 40 55 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Min. Typ. Max Unit Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V VIN=VOUT+2.0V, IOUT=10mA， PJ73AL25SQ(TA=25℃) Parameter Symbol Test conditions Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA 2.45 2.50 2.55 V Output current IOUT VIN=VOUT+2.0V 300 -- -- mA Load regulation ΔVOUT VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Voltage drop Note2 VDIF IOUT=10mA，ΔVOUT=2% -- 35 55 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V www.pingjingsemi.com Revision:1.1 Oct-2019 VIN=VOUT+2.0V, IOUT=10mA， 3 / 11 PJ73ALXXSQ Series Low Dropout Regulators PJ73AL28SQ(TA=25℃) Parameter Symbol Test conditions Min. Typ. Max Unit 2.744 2.80 2.856 V 300 -- -- mA VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA Output current IOUT VIN=VOUT+2.0V Load regulation ΔVOUT Voltage drop Note2 VDIF IOUT=10mA，ΔVOUT=2% -- 30 55 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Min. Typ. Max Unit Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V VIN=VOUT+2.0V, IOUT=10mA， PJ73AL30SQ(TA=25℃) Parameter Symbol Test conditions Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA 2.94 3.0 3.06 V Output current IOUT VIN=VOUT+2.0V 300 -- -- mA Load regulation ΔVOUT VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Voltage drop Note2 VDIF IOUT=100mA，ΔVOUT=2% -- 210 300 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V www.pingjingsemi.com Revision:1.1 Oct-2019 VIN=VOUT+2.0V, IOUT=10mA， 4 / 11 PJ73ALXXSQ Series Low Dropout Regulators PJ73AL33SQ(TA=25℃) Parameter Symbol Test conditions Min. Typ. Max Unit Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA 3.234 3.30 3.366 V Output current IOUT VIN=VOUT+2.0V 300 -- -- mA Load regulation ΔVOUT VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Voltage drop Note2 VDIF IOUT=100mA，ΔVOUT=2% -- 195 300 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Min. Typ. Max Unit 3.528 3.60 3.672 V 300 -- -- mA VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V VIN=VOUT+2.0V, IOUT=10mA， PJ73AL36SQ(TA=25℃) Parameter Symbol Test conditions Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA Output current IOUT VIN=VOUT+2.0V Load regulation ΔVOUT Voltage drop Note2 VDIF IOUT=100mA，ΔVOUT=2% -- 180 300 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V www.pingjingsemi.com Revision:1.1 Oct-2019 VIN=VOUT+2.0V, IOUT=10mA， 5 / 11 PJ73ALXXSQ Series Low Dropout Regulators PJ73AL40SQ(TA=25℃) Parameter Symbol Test conditions Min. Typ. Max Unit Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA 3.92 4.0 4.08 V Output current IOUT VIN=VOUT+2.0V 300 -- -- mA Load regulation ΔVOUT VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Voltage drop Note2 VDIF IOUT=100mA，ΔVOUT=2% -- 170 300 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Min. Typ. Max Unit 4.312 4.4 4.488 V 300 -- -- mA VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V VIN=VOUT+2.0V, IOUT=10mA， PJ73AL44SQ(TA=25℃) Parameter Symbol Test conditions Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA Output current IOUT VIN=VOUT+2.0V Load regulation ΔVOUT Voltage drop Note2 VDIF IOUT=100mA，ΔVOUT=2% -- 160 300 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V www.pingjingsemi.com Revision:1.1 Oct-2019 VIN=VOUT+2.0V, IOUT=10mA， 6 / 11 PJ73ALXXSQ Series Low Dropout Regulators PJ73AL50SQ(TA=25℃) Parameter Symbol Test conditions Min. Typ. Max Unit Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA 4.90 5.0 5.10 V Output current IOUT VIN=VOUT+2.0V 300 -- -- mA Load regulation ΔVOUT VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Voltage drop Note2 VDIF IOUT=100mA，ΔVOUT=2% -- 150 300 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Min. Typ. Max Unit Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V VIN=VOUT+2.0V, IOUT=10mA， PJ73AL90SQ(TA=25℃) Parameter Symbol Test conditions Output voltage VOUT VIN=VOUT+2.0V， IOUT=10mA 8.82 9.0 9.18 V Output current IOUT VIN=VOUT+2.0V 300 -- -- mA Load regulation ΔVOUT VIN=VOUT+2.0V 1mA≤IOUT≤300mA -- 37 100 mV Voltage drop Note2 VDIF IOUT=100mA，ΔVOUT=2% -- 130 300 mV Quiescent Current IQ No Load -- 1.5 3.0 μA VOUT+2.0V≤VIN≤20V，IOUT=1mA -- -- 0.2 %/V -- -- -- 20 V -- 100 -- ppm/℃ -- 400 -- mA Line regulation ΔVOUT / VOUT× ΔVIN Input voltage VIN Temperature coefficient ΔVOUT /VOUT× ΔTA -40℃≤TA≤85℃ Short Current IShort VOUT=0V VIN=VOUT+2.0V, IOUT=10mA， Note: 2.The difference of input voltage and output voltage when input voltage falls down gradually till output voltage equals to 98% of www.pingjingsemi.com Revision:1.1 Oct-2019 rating VOUT . 7 / 11 PJ73ALXXSQ Series Low Dropout Regulators Basic Circuits VIN VIN C 1 10μF C o m m o n www.pingjingsemi.com Revision:1.1 Oct-2019 PJ73ALXXSQ Series VOUT VOUT C 2 G N D 10μF Single Point GND C o m m o n 8 / 11 PJ73ALXXSQ Series Low Dropout Regulators Package Outline SOT-89 Dimensions in mm Ordering Information Device Package Shipping PJ73ALXXSQ SOT-89 1000PCS/Reel&Tape www.pingjingsemi.com Revision:1.1 Oct-2019 9 / 11 PJ73ALXXSQ Series Low Dropout Regulators Conditions of Soldering Recommended condition of reflow soldering  Recommended peak temperature is over 245 OC. If peak temperature is below 245 OC, you may adjust the following parameters:  Time length of peak temperature (longer)  Time length of soldering (longer)  Thickness of solder paste (thicker)  Conditions of hand soldering  Temperature: 370 OC  Time: 3s max.  Times: one time   Storage conditions Temperature 5 to 40 OC  Humidity 30 to 80% RH  Recommended period One year after manufacturing www.pingjingsemi.com Revision:1.1 Oct-2019 10 / 11 PJ73ALXXSQ Series Low Dropout Regulators Package Specification The method of packaging and dimension are shown as below figure. Cover Tape 1,000 pcs per reel SOT-89 Carrier Tape 10 reels per box 10,000 pcs per box 4 boxes per carton 40,000 pcs per carton 217 43 21 5 0 240 220 455 Tape and reel data (Units: mm) D A +1 12.7-0.2 179±1 PS 0.8 T1 06 0.6 1.0±0.2 0.4 6 0.2 E 110.0±0.2 F B 60.5±0.2 G 2.7±0.2 EIAJ-RRM-12-B 13.5±0.2 10.0±0.2 0.2 0.4 0.6 0.8 C 1.5+0.25 -0 2± 0.05 1.5+0.25 -0 Trailer Tape Revision:1.1 Oct-2019 0.292± 0.013 Cover Tape 8± 0.10 www.pingjingsemi.com 4.45± 0.10 1.75± 0.10 4± 0.10 .3 12+0 -0.1 5.5± 0.05 15.3±0.3 4.85± 0.10 Components Leader Tape 1.85± 0.10 Carrier Tape 11 / 11