CSM10FTDQR068

Data Sheet Customer: Product: Current Sensing Metal Chip Resistor –CSM Series Size: 0402/0603/0805/1206/2010/2512 Issued Date: 9-Jun-20 Edition: REV. A7 VIKING TECH CORPORATION 光頡科技股份有限公司 VIKING TECH CORPORATION KAOHSIUNG BRANCH 光頡科技股份有限公司高雄分公司 VIKING ELECTRONICS (WUXI) CO., LTD. 光頡電子(無錫)有限公司 No.70 Guangfu N. Rd., Hukou Township, Hsinchu County 303, Taiwan No.248-3, Sin-Sheng Rd., Cian-Jhen Dist., Kaohsiung, 806, Taiwan TEL:886-3-5972931 FAX:886-3-5972935•886-3-5973494 E-mail:sales@viking.com.tw TEL:886-7-8217999 FAX:886-7-8228229 E-mail:sales@viking.com.tw No.22 Xixia Road, Machinery & Industry Park, National Hi-Tech Industrial Development Zone of Wuxi, Wuxi, Jiangsu Province, China Zip Code:214028 TEL:86-510-85203339 FAX:86-510-85203667•86-510-85203977 E-mail:china@viking.com.tw Produced by (QC) Checked (QC) Approved by (QC) Prepared by (Sales) 9-Jun-20 9-Jun-20 9-Jun-20 9-Jun-20 Chun Ben Chang Ben Chang Accepted by (Customer) 【CSM Series】 Current Sensing Metal Chip Resistor ■Construction For Standard Power ■Features For High Power Alumina Substrate Barrier Layer Primary Overcoat Bottom Electrode External Electrode Marking Top Electrode Adhesive Edge Electrode Resistor Layer －SMD Type designed for automatic insertion －High power rating in small size ■Dimensions －Low resistance resistor for current detection －Metal foil construction ensures high reliability and performance with very low and stable TCR Resistance Range (mΩ) Size Type (Inch) －Designed for current sense circuits in power electronic systems CSM02 －Pb-Free to meet RoHS requirements ■Applications CSM05 D1 D2 - 0.27±0.10 1.05±0.10 0.55±0.10 0.45±0.10 10 - 29 1.55±0.10 0.85±0.10 0.40±0.10 0.30±0.15 0.45±0.15 0603 30 - 100 1.55±0.10 0.85±0.10 0.40±0.10 0.30±0.15 0.35±0.15 10 – 100 (1/2W) 1.70±0.15 1.00±0.15 0.62±0.15 0.35±0.25 0.35±0.25 0805 －Switching Power Supply CSM06 T 10 - 50 －Power Management Applications －Over Current Protection in Audio Applications W 0402 －AEC-Q200 Compliance (only High Power Rating) CSM03 L 1206 －Voltage Regulation Module (VRM) －DC-DC Converter, Battery Pack, Charger, Adaptor CSM10 2010 CSM12 2512 10 - 29 2.00±0.15 1.25±0.15 0.55±0.10 0.30±0.20 0.50±0.20 30 - 100 10 – 100 (3/4W) 2.00±0.15 1.25±0.15 0.52±0.10 0.30±0.20 0.35±0.20 2.15±0.15 1.40±0.15 0.75±0.15 0.40±0.25 0.40±0.25 10 - 29 3.05±0.15 1.55±0.15 0.58±0.15 0.50±0.25 0.90±0.25 30 - 100 10 – 100 (1W) 3.05±0.15 1.55±0.15 0.55±0.15 0.50±0.25 0.60±0.25 3.20±0.15 1.70±0.15 0.75±0.15 0.50±0.25 0.50±0.25 10 - 29 5.00±0.20 2.50±0.20 0.58±0.15 0.60±0.30 1.50±0.30 30 - 100 5.00±0.20 2.50±0.20 0.55±0.15 0.60±0.30 0.90±0.30 10 - 29 6.30±0.20 3.15±0.20 0.58±0.15 0.60±0.30 1.80±0.30 30 - 100 6.30±0.20 3.15±0.20 0.55±0.15 0.60±0.30 1.20±0.30 ■Part Numbering CSM Product Type 06 Dimensions (L×W) 02: 0402 03: 0603 05: 0805 06: 1206 10: 2010 12: 2512 www.viking.com.tw F T E U Resistance Tolerance Packaging Code TCR (PPM/C) Power Rating D: ±0.5% F: ±1% G: ±2% J: ±5% T: Taping Reel D: ±50 E: ±100 F: ±200 W : 1/8W V : 1/4W U: 1/2W Q: 3/4W T: 1W A: 1.5W S: 2W For detail questions, contact：sales@viking.com.tw 1 R100 Resistance R010: 0.01Ω R100: 0.1Ω Marking : Standard N: No Marking Edition :REV. A7 Revision: 09-Jun-2020 【CSM Series】 Current Sensing Metal Chip Resistor ■Derating Curve Curve For Derating Standard Power For High Power Power ratio(%) . 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) For Standard Power For Hi Power ■Standard Electrical Specifications Item Type CSM03 (0603) CSM05 (0805) CSM06 (1206) CSM10 (2010) CSM12 (2512) Power Rating at 70°C Operating Temp. Range Resistance Range (mΩ) ±0.5% ±1% ±2% ±5% 10 - 19 ±100 20 - 100 ±50 ±100 - 10 - 19 ±100 30 - 100 20 - 100 ±50 ±100 - 10 - 19 ±100 30 - 100 20 - 100 ±50 ±100 - 10 - 19 ±100 30 - 100 20 - 100 ±50 ±100 - 10 - 19 ±100 30 - 100 20 - 100 ±50 ±100 1/8W - 1/4W 1/2W TCR (PPM/°C) -55 ~ +155C 3/4W 1W ■High Power Rating Electrical Specifications Item Type Power Rating at 70°C CSM02 (0402) 1/4W CSM03 (0603) 1/2W Operating Temp. Range Resistance Range (mΩ) ±1% ±2% ±5% TCR (PPM/°C) 11.2A 10 - 50 ±100 15.8A 10 - 100 ±100 Max. Overload Current -55 ~ +170C CSM05 (0805) 3/4W 19.4A 10 - 100 ±50 CSM06 (1206) 1W 22.4A 10 - 100 ±50 Operating Voltage=√(P*R) ; Overload Voltage=2.5*√(P*R) ; Operating Current=√(P/R) ■Viking is capable of manufacturing the optional spec based on customer’s requirement. www.viking.com.tw For detail questions, contact：sales@viking.com.tw 2 Edition :REV. A7 Revision: 09-Jun-2020 【CSM Series】 Current Sensing Metal Chip Resistor ■Environmental Characteristics For Standard Series Item Requirement Test Method Temperature Coefficient of Resistance As Spec. (T.C.R.) At 25C/-55C and 25C/+125C, 25C is the reference temperature Short Time Overload (0.5%+0.05Ω) 5* Rated Power for 5 seconds Insulation Resistance ≧10G Max. Overload Voltage for 1 minute Endurance (1.0%+0.05Ω) 702C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF” Damp Heat with Load (1.0%+0.05Ω) 402C, 90~95% R.H., RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF” Dry Heat (0.5%+0.05Ω) at +155C for 1000 hrs Bending Strength (1.0%+0.05Ω) Bending once for 5 seconds 2010, 2512 sizes: 2mm Other sizes: 3mm Solderability 95% min. coverage 2455C for 3 seconds Resistance to Soldering Heat (0.5%+0.05Ω) 260±5C for 10 seconds Voltage Proof No breakdown or flashover 1.42 times Max. Operating Voltage for 1 minute Leaching Individual leaching area ≦5% Total leaching area ≦10% 2605C for 30 seconds Rapid Change of Temperature (0.5%+0.05Ω) -55C to +155C, 5 cycles RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.  Reference Standards: IEC 60115-1, 60068-2-58; JIS-C 5201-1  Storage Temperature: 15~28°C; Humidity < 80%RH www.viking.com.tw For detail questions, contact：sales@viking.com.tw 3 Edition :REV. A7 Revision: 09-Jun-2020 【CSM Series】 Current Sensing Metal Chip Resistor ■Environmental Characteristics For High Power Rating Series Item Requirement Test Method Temperature Coefficient of Resistance (T.C.R.) As Spec. -55C~+125C, 25C is the reference temperature Short Time Overload △ R≤±1%R 2512 sizes: 4* Rated Power for 5 seconds Other sizes: 5* Rated Power for 5 seconds Insulation Resistance ≧1000MΩ Max. Overload Voltage for 1 minute Operational Life △ R≤±1%R Biased Humidity △ R≤±1%R High Temperature Exposure △ R≤±1%R at +155C for 1000 hrs Temperature Cycling △ R≤±1%R -55C to +125C, 1000 cycles Bending Strength (Board Flex) △ R≤±1%R Bending once for 60 seconds Solderability 95% min. coverage 2455C for 3 seconds Resistance to Soldering Heat △ R≤±1%R 260±5C for 10 seconds Voltage Proof No breakdown or flashover 1.42 times Max. Operating Voltage for 1 minute Resistance to solvents Marking Unsmeared Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. Mechanical Shock △ R≤±1%R Wave Form: Tolerance for half sine shock pulse. Peak value is 100g’s. Normal duration (D) is 6. Vibration △ R≤±1%R 5 g’s for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz ESD △ R≤±1%R Human body model 0402 sizes: 1KV Other sizes: 2KV Flammability No ignition of the tissue paper or scorching V-0 or V-1 are acceptable. Electrical test not or the pinewood board required. Terminal strength No broken Condition D Steady State TA=125C at derated power. Measurement at 244 hours after test conclusion 85C/85RH., 1000 hrs, apply 10% of operating power (current) or limiting element current whichever is lower Force of 1.8kg for 60 seconds RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.  Reference Standards: IEC 60115-1, JIS-C 5201-1, AEC-Q200, MIL-STD-202, UL-94  Storage Temperature: 15~28°C; Humidity < 80%RH ■Packaging Packaging Quantity & Reel Specifications Unit: mm CSM02 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 10,000 Emboss Plastic Tape (EA) - CSM03 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 5,000 - CSM05 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 5,000 - CSM06 178.0±1.0 60.0+1.0 13.5±0.7 9.5±0.1 11.5±1.0 5,000 - CSM10 178.0±1.0 60.0+1.0 13.5±0.7 13.5±1.0 15.5±1.0 - 4,000 CSM12 178.0±1.0 60.0+1.0 13.5±0.7 13.5±1.0 15.5±1.0 - 4,000 Type ΦA www.viking.com.tw ΦB ΦC W T Paper Tape (EA) For detail questions, contact：sales@viking.com.tw 4 Edition :REV. A7 Revision: 09-Jun-2020 【CSM Series】 Current Sensing Metal Chip Resistor Paper Tape Specifications Bottom Tape Top Tape ψ D0 E A F W B T P2 P0 Direction of unreeling Unit: mm A B W E F P0 P1 P2 ΦD0 T 0.66±0.06 1.18±0.06 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 2.00±0.05 2.00±0.05 1.55±0.05 0.60±0.06 1.10±0.10 1.90±0.10 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.70±0.10 1.10±0.10 1.85±0.10 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.60±0.05 1.60±0.10 2.40±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.85±0.10 1.60±0.10 2.35±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.95±0.05 1.90±0.10 3.50±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.85±0.10 1.90±0.10 3.50±0.20 8.0±0.20 1.75±0.10 3.50±0.05 4.00±0.10 4.00±0.05 2.00±0.05 1.50+0.1,-0 0.95±0.05 Type CSM02 (1/4W) CSM03 CSM03 (1/2W) CSM05 CSM05 (3/4W) CSM06 CSM06 (1W) P1 Resistor Paper Tape Embossed Plastic Tape Specifications Top Tape ψ D0 E A F W B T ψD11.4Min. Resistor Embossed Tape P P P 1 2 0 Direction of unreeling Unit: mm Type A B W E F P0 P1 P2 ΦD0 T CSM10 2.80±0.10 5.50±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 CSM12 3.50±0.10 6.70±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 Resistance Range 10-50mΩ A (mm) 0.50 B (mm) 0.50 C (mm) 0.60 t (m) 35 10-29mΩ 0.40 1.20 0.90 - 30-100mΩ 0.70 1.05 0.90 - 10-100mΩ 0.50 1.00 0.90 35 ▓Recommend Land Pattern Pad Layout Type CSM02 C CSM03 CSM03(1/2W) B A CSM05 CSM05(3/4W) CSM06 CSM06(1W) CSM10 CSM12 10-29mΩ 0.80 1.10 1.35 - 30-100mΩ 1.00 1.00 1.35 - 10-100mΩ 0.80 1.30 1.30 70 10-29mΩ 0.9 1.70 1.70 - 30-100mΩ 1.50 1.40 1.70 - 10-100mΩ 1.50 1.40 1.70 105 10-29mΩ 1.70 2.35 2.50 - 30-100mΩ 2.80 1.80 2.50 - 10-29mΩ 2.30 2.90 3.20 - 30-100mΩ 3.60 2.25 3.20 - t: copper toil minimum thickness of PCB www.viking.com.tw For detail questions, contact：sales@viking.com.tw 5 Edition :REV. A7 Revision: 09-Jun-2020