S-1200 Series
www.ablic.com
www.ablicinc.com
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT
CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
© ABLIC Inc., 2003-2015
The S-1200 Series, developed by using CMOS technology, is a positive voltage regulator with a low dropout
voltage, high accuracy output voltage.
A 0.1 F small ceramic capacitor can be used. It operates with low current consumption of 18 A typ.
The built-in output current protection circuit prevents the load current from exceeding the current capacity of the
output transistor.
Compared with the voltage regulators using the conventional CMOS technology, small ceramic capacitors are
also available. Furthermore, the small HSNT-6A package realizes high-density mounting.
Features
Output voltage:
Input voltage:
Output voltage accuracy:
Dropout voltage:
Current consumption:
Output current:
Input and output capacitors:
Ripple rejection:
Built-in overcurrent protection circuit:
Built-in ON/OFF circuit:
Operation temperature range:
Lead-free, Sn 100%, halogen-free*2
1.5 V to 5.5 V, selectable in 0.1 V step
2.0 V to 10.0 V
1.0%
140 mV typ. (3.0 V output product, IOUT 100 mA)
During operation: 18 A typ., 40 A max.
During power-off: 0.01 A typ., 1.0 A max.
Possible to output 150 mA (VIN VOUT(S) 1.0 V)*1
A ceramic capacitor of 0.1 F or more can be used.
70 dB typ. (f 1.0 kHz, 1.5 V VOUT 3.0 V)
65 dB typ. (f 1.0 kHz, 3.1 V VOUT 5.5 V)
Limits overcurrent of output transistor.
Ensures long battery life.
Ta 40C to 85C
*1. Attention should be paid to the power dissipation of the package when the output current is large.
*2. Refer to “ Product Name Structure” for details.
Applications
Power supply for battery-powered device
Power supply for personal communication device
Power supply for home electric appliance
Power supply for cellular phone
Packages
SNT-6A(H)
SOT-23-5
HSNT-6A
1
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Block Diagram
*1
VIN
VOUT
Overcurrent
protection circuit
ON/OFF
circuit
ON/OFF
Reference
voltage circuit
VSS
*1. Parasitic diode
Figure 1
2
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Product Name Structure
Users can select the product type, output voltage, and package type for the S-1200 Series. Refer to
"1. Product name" regarding the contents of product name, "2. Packages" regarding the package
drawings, "3. Product name list" regarding details of the product name.
1.
Product name
1. 1
SNT-6A(H)
S-1200
x
xx
-
I6T2
U
Environmental code
U
: Lead-free (Sn 100%), halogen-free
Package abbreviation and packing specifications
I6T2 : SNT-6A(H), Tape
*1
Output voltage
15 to 55
(e.g. When output voltage is 1.5 V, it is expressed as 15.)
*2
Product type
A : ON/OFF pin negative logic
B : ON/OFF pin positive logic
*1. Refer to the tape drawing.
*2. Refer to “3. ON/OFF pin” in “ Operation”.
1. 2
SOT-23-5
S-1200
x
xx
-
M5T1
x
Environmental code
U
: Lead-free (Sn 100%), halogen-free
G
: Lead-free (for details, please contact our sales office)
Package abbreviation and packing specifications
M5T1 : SOT-23-5, Tape
*1
Output voltage
15 to 55
(e.g. When output voltage is 1.5 V, it is expressed as 15.)
*2
Product type
A : ON/OFF pin negative logic
B : ON/OFF pin positive logic
3
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
1. 3
HSNT-6A
S-1200
x
xx
-
A6T1
U
Environmental code
U
: Lead-free (Sn 100%), halogen-free
Package abbreviation and packing specifications*1
A6T1 : HSNT-6A, Tape
Output voltage
15 to 55
(e.g. When output voltage is 1.5 V, it is expressed as 15.)
*2
Product type
A : ON/OFF pin negative logic
B : ON/OFF pin positive logic
*1. Refer to the tape drawing.
*2. Refer to “3. ON/OFF pin” in “ Operation”.
2.
Packages
Package Name
SNT-6A(H)
SOT-23-5
HSNT-6A
4
Package
PI006-A-P-SD
MP005-A-P-SD
PJ006-A-P-SD
Tape
PI006-A-C-SD
MP005-A-C-SD
PJ006-A-C-SD
Drawing Code
Reel
PI006-A-R-SD
MP005-A-R-SD
PJ006-A-R-SD
Land
PI006-A-L-SD
PJ006-A-LM-SD
Stencil Opening
PJ006-A-LM-SD
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
3.
Product name list
Table
1
Output Voltage
SNT-6A(H)
SOT-23-5
HSNT-6A
1.5 V ±1.0%
S-1200B15-I6T2U
S-1200B15-M5T1x
S-1200B15-A6T1U
1.6 V ±1.0%
S-1200B16-I6T2U
S-1200B16-M5T1x
S-1200B16-A6T1U
1.7 V ±1.0%
S-1200B17-I6T2U
S-1200B17-M5T1x
S-1200B17-A6T1U
1.8 V ±1.0%
S-1200B18-I6T2U
S-1200B18-M5T1x
S-1200B18-A6T1U
1.9 V ±1.0%
S-1200B19-I6T2U
S-1200B19-M5T1x
S-1200B19-A6T1U
2.0 V ±1.0%
S-1200B20-I6T2U
S-1200B20-M5T1x
S-1200B20-A6T1U
2.1 V ±1.0%
S-1200B21-I6T2U
S-1200B21-M5T1x
S-1200B21-A6T1U
2.2 V ±1.0%
S-1200B22-I6T2U
S-1200B22-M5T1x
S-1200B22-A6T1U
2.3 V ±1.0%
S-1200B23-I6T2U
S-1200B23-M5T1x
S-1200B23-A6T1U
2.4 V ±1.0%
S-1200B24-I6T2U
S-1200B24-M5T1x
S-1200B24-A6T1U
2.5 V ±1.0%
S-1200B25-I6T2U
S-1200B25-M5T1x
S-1200B25-A6T1U
2.6 V ±1.0%
S-1200B26-I6T2U
S-1200B26-M5T1x
S-1200B26-A6T1U
2.7 V ±1.0%
S-1200B27-I6T2U
S-1200B27-M5T1x
S-1200B27-A6T1U
2.8 V ±1.0%
S-1200B28-I6T2U
S-1200B28-M5T1x
S-1200B28-A6T1U
2.9 V ±1.0%
S-1200B29-I6T2U
S-1200B29-M5T1x
S-1200B29-A6T1U
3.0 V ±1.0%
S-1200B30-I6T2U
S-1200B30-M5T1x
S-1200B30-A6T1U
3.1 V ±1.0%
S-1200B31-I6T2U
S-1200B31-M5T1x
S-1200B31-A6T1U
3.2 V ±1.0%
S-1200B32-I6T2U
S-1200B32-M5T1x
S-1200B32-A6T1U
3.3 V ±1.0%
S-1200B33-I6T2U
S-1200B33-M5T1x
S-1200B33-A6T1U
3.4 V ±1.0%
S-1200B34-I6T2U
S-1200B34-M5T1x
S-1200B34-A6T1U
3.5 V ±1.0%
S-1200B35-I6T2U
S-1200B35-M5T1x
S-1200B35-A6T1U
3.6 V ±1.0%
S-1200B36-I6T2U
S-1200B36-M5T1x
S-1200B36-A6T1U
3.7 V ±1.0%
S-1200B37-I6T2U
S-1200B37-M5T1x
S-1200B37-A6T1U
3.8 V ±1.0%
S-1200B38-I6T2U
S-1200B38-M5T1x
S-1200B38-A6T1U
3.9 V ±1.0%
S-1200B39-I6T2U
S-1200B39-M5T1x
S-1200B39-A6T1U
4.0 V ±1.0%
S-1200B40-I6T2U
S-1200B40-M5T1x
S-1200B40-A6T1U
4.1 V ±1.0%
S-1200B41-I6T2U
S-1200B41-M5T1x
S-1200B41-A6T1U
4.2 V ±1.0%
S-1200B42-I6T2U
S-1200B42-M5T1x
S-1200B42-A6T1U
4.3 V ±1.0%
S-1200B43-I6T2U
S-1200B43-M5T1x
S-1200B43-A6T1U
4.4 V ±1.0%
S-1200B44-I6T2U
S-1200B44-M5T1x
S-1200B44-A6T1U
4.5 V ±1.0%
S-1200B45-I6T2U
S-1200B45-M5T1x
S-1200B45-A6T1U
4.6 V ±1.0%
S-1200B46-I6T2U
S-1200B46-M5T1x
S-1200B46-A6T1U
4.7 V ±1.0%
S-1200B47-I6T2U
S-1200B47-M5T1x
S-1200B47-A6T1U
4.8 V ±1.0%
S-1200B48-I6T2U
S-1200B48-M5T1x
S-1200B48-A6T1U
4.9 V ±1.0%
S-1200B49-I6T2U
S-1200B49-M5T1x
S-1200B49-A6T1U
5.0 V ±1.0%
S-1200B50-I6T2U
S-1200B50-M5T1x
S-1200B50-A6T1U
5.1 V ±1.0%
S-1200B51-I6T2U
S-1200B51-M5T1x
S-1200B51-A6T1U
5.2 V ±1.0%
S-1200B52-I6T2U
S-1200B52-M5T1x
S-1200B52-A6T1U
5.3 V ±1.0%
S-1200B53-I6T2U
S-1200B53-M5T1x
S-1200B53-A6T1U
5.4 V ±1.0%
S-1200B54-I6T2U
S-1200B54-M5T1x
S-1200B54-A6T1U
5.5 V ±1.0%
S-1200B55-I6T2U
S-1200B55-M5T1x
S-1200B55-A6T1U
Remark 1. Please contact our sales office for products with an output voltage other than those
specified above or type A products.
2. x: G or U
3. Please select products of environmental code = U for Sn 100%, halogen-free products.
5
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Pin Configurations
Table 2
SNT-6A(H)
Top view
1
6
2
5
3
4
Pin No.
Symbol
Pin Description
1
VOUT
Output voltage pin
2
VSS
GND pin
3
NC*1
No connection
4
ON/OFF
ON/OFF pin
5
VSS
GND pin
6
VIN
Input voltage pin
*1. The NC pin is electrically open.
The NC pin can be connected to the VIN pin or the VSS
pin.
Figure 2
Table
SOT-23-5
Top view
5
1
Pin No.
Symbol
Description
1
VIN
Input voltage pin
2
VSS
GND pin
3
ON/OFF
ON/OFF pin
4
NC*1
No connection
5
VOUT
Output voltage pin
*1. The NC pin is electrically open.
The NC pin can be connected to the VIN pin or the VSS
pin.
4
2
Figure
3
3
Table
HSNT-6A
Top view
1
6
2
5
3
4
Bottom view
6
1
5
2
4
3
*1
*1. Connect the heatsink of
backside at shadowed area
to the board, and set electric
potential open or GND.
However, do not use it as
the function of electrode.
Figure
6
3
4
4
Pin No.
Symbol
Description
1
VOUT
Output voltage pin
2
NC*1
No connection
3
VSS
GND pin
4
ON/OFF
ON/OFF pin
5
NC*1
No connection
6
VIN
Input voltage pin
*1. The NC pin is electrically open.
The NC pin can be connected to the VIN pin or the VSS
pin.
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Absolute Maximum Ratings
Table
Item
Symbol
VIN
VON/OFF
VOUT
Input voltage
Output voltage
SNT-6A(H)
Power dissipation
SOT-23-5
PD
HSNT-6A
Operation ambient temperature
Topr
Storage temperature
Tstg
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm 76.2 mm t1.6 mm
(2) Board name : JEDEC STANDARD51-7
5
(Ta 25C unless otherwise specified)
Absolute Maximum Rating
Unit
V
VSS 0.3 to VSS 12
V
VSS 0.3 to VIN 0.3
V
VSS 0.3 to VIN 0.3
500*1
mW
300 (When not mounted on board)
mW
600*1
mW
2
1000
mW
40 to 85
C
40 to 125
C
*2. When mounted on board
[Mounted board]
(1) Board size : 50 mm 50 mm t1.6 mm
(2) Wiring ratio : 50%
The absolute maximum ratings are rated values exceeding which the product could suffer
physical damage. These values must therefore not be exceeded under any conditions.
Power Dissipation (PD) [mW]
Caution
Figure 5
1200
1000
800
HSNT-6A
600
SOT-23-5
400
200
0
SNT-6A(H)
0
100
150
50
Ambient Temperature (Ta) [C]
Power Dissipation of The Package (When Mounted on Board)
7
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Electrical Characteristics
Table
6
(Ta 25C unless otherwise specified)
Item
Symbol
Output voltage*1
VOUT(E)
Output current*2
Dropout voltage*3
IOUT
Vdrop
1
mA
V
V
V
V
V
V
V
V
V
V
3
1
1
1
1
1
1
1
1
1
1
0.2
%/V
1
15
50
mV
1
100
ppm/
C
1
18
40
A
2
0.01
1.0
A
2
2.0
10
V
VOUT(S)
0.99
150*5
0.50
0.50
VOUT(S)
0.50
0.08
0.06
0.05
0.04
0.55
0.24
0.16
0.14
0.13
VOUT(S)
1.01
0.51
0.12
0.08
0.07
0.06
0.60
0.31
0.23
0.21
0.19
0.01
VIN VOUT(S) 1.0 V, RL 1.0 k
1.5
V
4
VSL
VIN VOUT(S) 1.0 V, RL 1.0 k
0.25
V
4
ISH
VIN 6.5 V, VON/OFF 6.5 V
0.1
0.1
A
4
ISL
VIN 6.5 V, VON/OFF 0 V
0.1
0.1
A
4
70
dB
5
65
dB
5
250
mA
3
VOUT2
8
V
Max.
VSH
Load regulation
Short-circuit current
Test
Circuit
Typ.
VIN
VOUT1
VIN VOUT
Ripple rejection
VIN VOUT(S) 1.0 V, IOUT 30 mA
Unit
Min.
VIN VOUT(S) 1.0 V
IOUT 30 mA
1.5 V VOUT(S) 1.9 V
2.0 V VOUT(S) 2.4 V
2.5 V VOUT(S) 2.9 V
3.0 V VOUT(S) 3.2 V
3.3 V VOUT(S) 5.5 V
IOUT 100 mA
1.5 V VOUT(S) 1.9 V
2.0 V VOUT(S) 2.4 V
2.5 V VOUT(S) 2.9 V
3.0 V VOUT(S) 3.2 V
3.3 V VOUT(S) 5.5 V
VOUT(S) 0.5 V VIN 10 V,
IOUT 30 mA
VIN VOUT(S) 1.0 V,
1.0 mA IOUT 80 mA
VIN VOUT(S) 1.0 V, IOUT 30 mA,
40C Ta 85C
VIN VOUT(S) 1.0 V, ON/OFF pin ON,
no load
VIN VOUT(S) 1.0 V, ON/OFF pin OFF,
no load
Line regulation
Output voltage
*4
temperature coefficient
Current consumption
during operation
Current consumption
during power-off
Input voltage
ON/OFF pin
input voltage “H”
ON/OFF pin
input voltage “L”
ON/OFF pin
input current “H”
ON/OFF pin
input current “L”
Conditions
VOUT
Ta VOUT
ISS1
ISS2
RR
Ishort
VIN VOUT(S) 1.0 V,
1.5 V VOUT(S) 3.0 V
f 1.0 kHz,
Vrip 0.5 Vrms,
3.1 V VOUT(S) 5.5 V
IOUT 50 mA
VIN VOUT(S) 1.0 V, ON/OFF pin ON,
VOUT 0 V
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
*1. VOUT(S): Set output voltage
VOUT(E): Actual output voltage
Output voltage when fixing IOUT( 30 mA) and inputting VOUT(S) 1.0 V
*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output
current.
*3. Vdrop VIN1 (VOUT3 0.98)
VOUT3 is the output voltage when VIN VOUT(S) 1.0 V and IOUT 30 mA or IOUT 100 mA.
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the
input voltage.
*4. A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
VOUT
VOUT
mV/°C *1 = VOUT(S) V *2
ppm/°C *3 1000
Ta
Ta VOUT
[
]
[]
[
]
*1. Change in temperature of output voltage
*2. Set output voltage
*3. Output voltage temperature coefficient
*5. The output current can be at least this value.
Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid
to the power dissipation of the package when the output current is large.
This specification is guaranteed by design.
9
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Test Circuits
1.
+
VOUT
VIN
ON/OFF
V
VSS
A
+
Set to ON
Figure
2.
+
A
6
VIN
VOUT
ON/OFF
VSS
Set to
VIN or GND
Figure
3.
VIN
7
VOUT
ON/OFF
+
A
V
VSS
+
Set to ON
Figure
4.
VOUT
VIN
+
8
+
A
ON/OFF
VSS
Figure
RL
V
9
5.
VIN
VOUT
+
ON/OFF
VSS
Set to ON
Figure
10
10
V
RL
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Standard Circuit
Output
Input
VIN
VOUT
*2
CL
ON/OFF
VSS
*1
CIN
GND
Single GND
*1. CIN is a capacitor for stabilizing the input.
*2. A ceramic capacitor of 0.1 F or more can be used for CL.
Figure
11
Caution The above connection diagram and constant will not guarantee successful operation.
Perform thorough evaluation using the actual application to set the constant.
Condition of Application
Input capacitor (CIN):
Output capacitor (CL):
ESR of output capacitor:
0.1 F or more
0.1 F or more
1.0 or less
Caution Generally a series regulator may cause oscillation, depending on the selection of external
parts. Check that no oscillation occurs with the application using the above capacitor.
Selection of Input and Output Capacitors (CIN, CL)
The S-1200 Series requires an output capacitor between the VOUT pin and the VSS pin for phase
compensation. Operation is stabilized by a ceramic capacitor with an output capacitance of 0.1 F or more in
the entire temperature range. When using an OS capacitor, a tantalum capacitor, or an aluminum electrolytic
capacitor, the capacitance must be 0.1 F or more, and the ESR must be 1.0 or less.
The value of the output overshoot or undershoot transient response varies depending on the value of the
output capacitor. The required capacitance of the input capacitor differs depending on the application.
The recommended value for an application is CIN 0.1 F, CL 0.1 F; however, when selecting the output
capacitor, perform sufficient evaluation, including evaluation of temperature characteristics, on the actual
device.
11
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Explanation of Terms
1.
Low dropout voltage regulator
This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.
2.
Low ESR
A capacitor whose ESR (Equivalent Series Resistance) is low. The S-1200 Series enables use of a low
ESR capacitor, such as a ceramic capacitor, for the output capacitor (CL). A capacitor whose ESR is 1.0
or less can be used.
3.
Output voltage (VOUT)
The accuracy of the output voltage is ensured at 1.0% under the specified conditions of fixed input
voltage*1, fixed output current, and fixed temperature.
*1.
Differs depending on the product.
Caution
4.
If the above conditions change, the output voltage value may vary and exceed the
accuracy range of the output voltage. Refer to “ Electrical Characteristics” and
“ Characteristics (Typical Data)” for details.
∆VOUT1
Line regulation
∆VIN VOUT
Indicates the dependency of the output voltage on the input voltage. That is, the values show how much
the output voltage changes due to a change in the input voltage with the output current remaining
unchanged.
5.
Load regulation (VOUT2)
Indicates the dependency of the output voltage on the output current. That is, the values show how
much the output voltage changes due to a change in the output current with the input voltage remaining
unchanged.
6.
Dropout voltage (Vdrop)
Indicates the difference between input voltage (VIN1) and the output voltage when; decreasing input
voltage (VIN) gradually until the output voltage has dropped out to the value of 98% of output voltage
(VOUT3), which is at VIN VOUT(S) 1.0 V.
Vdrop VIN1 (VOUT3 0.98)
12
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
7.
∆VOUT
Output voltage temperature coefficient
∆Ta VOUT
The shaded area in Figure 12 is the range where VOUT varies in the operation temperature range when
the output voltage temperature coefficient is 100 ppm/C.
Example of S-1200B28 typ. product
VOUT
[V]
0.28 mV/C
*1
VOUT(E)
0.28 mV/C
40
*1.
25
85
Ta [C]
VOUT(E) is the value of the output voltage measured at Ta = 25C.
Figure
12
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
VOUT
VOUT
mV/°C *1 = VOUT(S) V *2
ppm/°C *3 1000
Ta
Ta VOUT
[
*1.
*2.
*3.
]
[]
[
]
Change in temperature of output voltage
Set output voltage
Output voltage temperature coefficient
13
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Operation
1.
Basic operation
Figure 13 shows the block diagram of the S-1200 Series.
The error amplifier compares the reference voltage (Vref) with feedback voltage (Vfb), which is the output
voltage resistance-divided by feedback resistors (Rs and Rf). It supplies the gate voltage necessary to
maintain the constant output voltage which is not influenced by the input voltage and temperature
change, to the output transistor.
VIN
*1
Current
supply
Error
amplifier
VOUT
Vref
Rf
Vfb
Reference voltage
circuit
Rs
VSS
*1. Parasitic diode
Figure
2.
13
Output transistor
In the S-1200 Series, a low on-resistance P-channel MOS FET is used as the output transistor.
Be sure that VOUT does not exceed VIN 0.3 V to prevent the voltage regulator from being damaged due
to reverse current flowing from the VOUT pin through a parasitic diode to the VIN pin, when the potential
of VOUT became higher than VIN.
14
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
3.
ON/OFF pin
This pin starts and stops the regulator.
When the ON/OFF pin is set to OFF level, the entire internal circuit stops operating, and the built-in
P-channel MOS FET output transistor between the VIN pin and the VOUT pin is turned off, reducing
current consumption significantly. The VOUT pin becomes the VSS level due to the internally divided
resistance of several hundreds k between the VOUT pin and the VSS pin.
The structure of the ON/OFF pin is as shown in Figure 14. Since the ON/OFF pin is neither pulled down
nor pulled up internally, do not use it in the floating status. In addition, note that the current consumption
increases if a voltage of 0.3 V to VIN – 0.3 V is applied to the ON/OFF pin. When not using the ON/OFF
pin, connect it to the VSS pin in the product A type, and connect it to the VIN pin in B type.
Table
7
Product Type
ON/OFF Pin
Internal Circuit
VOUT Pin Voltage
Current Consumption
A
“L”: ON
Operate
Set value
ISS1
A
“H”: OFF
Stop
VSS level
ISS2
B
“L”: OFF
Stop
VSS level
ISS2
B
“H”: ON
Operate
Set value
ISS1
VIN
ON/OFF
VSS
Figure
14
15
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Precautions
Wiring patterns for the VIN pin, the VOUT pin and GND should be designed so that the impedance is
low. When mounting an output capacitor between the VOUT pin and the VSS pin (CL) and a capacitor
for stabilizing the input between the VIN pin and the VSS pin (CIN), the distance from the capacitors to
these pins should be as short as possible.
Note that generally the output voltage may increase when a series regulator is used at low load current
(1.0 mA or less).
Note that generally the output voltage may increase due to the leakage current from an output driver
when a series regulator is used at high temperature.
Generally a series regulator may cause oscillation, depending on the selection of external parts. The
following conditions are recommended for the S-1200 Series. However, be sure to perform sufficient
evaluation under the actual usage conditions for selection, including evaluation of temperature
characteristics.
Input capacitor (CIN):
0.1 F or more
Output capacitor (CL):
0.1 F or more
Equivalent series resistance (ESR): 1.0 or less
The voltage regulator may oscillate when the impedance of the power supply is high and the input
capacitance is small or an input capacitor is not connected.
If the output capacitance is small, power supply's fluctuation and the characteristics of load fluctuation
become worse. Sufficiently evaluate the output voltage's fluctuation with the actual device.
Overshoot may occur in the output voltage momentarily if the voltage is rapidly raised at power-on or
when the power supply fluctuates. Sufficiently evaluate the output voltage at power-on with the actual
device.
The application conditions for the input voltage, the output voltage, and the load current should not
exceed the package power dissipation.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in
electrostatic protection circuit.
In determining the output current, attention should be paid to the output current value specified in
Table 6 in “ Electrical Characteristics” and footnote *5 of the table.
ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement
by products including this IC of patents owned by a third party.
16
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Characteristics (Typical Data)
1.
Output Voltage vs. Output Current (When load current increases)
S-1200B30 (Ta 25°C)
3.5
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
3.0
2.5
VOUT [V]
VOUT [V]
S-1200B15 (Ta 25°C)
VIN = 10 V
3.0 V
2.5 V
0
100
300
400
1.5
1.0
3.5 V
3.3 V
0.5
2.0 V
1.8 V
200
VIN = 10 V
5.0 V
4.0 V
2.0
0
0
500
100
IOUT [mA]
200
400
300
500
600
IOUT [mA]
S-1200B50 (Ta 25°C)
6
5
VIN = 5.3 V
5.5 V
6.0 V
VOUT [V]
4
3
10 V
7.0 V
2
1
0
0
100
200
400
300
500
600
Remark In determining the output current, attention
should be paid to the following.
1. The minimum output current value and
footnote *5 in Table 6 in “ Electrical
Characteristics”
2. The package power dissipation
IOUT [mA]
2.
Output voltage vs. Input voltage
S-1200B15 (Ta 25°C)
1.6
3.1
1.5
3.0
1.4
2.9
IOUT = 1.0 mA
1.3
VOUT [V]
VOUT [V]
S-1200B30 (Ta 25°C)
30 mA
50 mA
1.2
1.1
1.0
1.0
2.8
IOUT =1.0 mA
2.7
30 mA
50 mA
2.6
1.5
2.0
2.5
3.0
3.5
VIN [V]
2.5
2.5
3.0
3.5
4.0
4.5
5.0
VIN [V]
S-1200B50 (Ta 25°C)
5.5
5.0
VOUT [V]
4.5
IOUT = 1.0 mA
4.0
30 mA
50 mA
3.5
3.0
2.5
2.0
3.0
4.0
5.0
6.0
7.0
VIN [V]
17
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
3.
Dropout voltage vs. Output current
S-1200B30
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
25°C
85°C
Vdrop [V]
Vdrop [V]
S-1200B15
–40°C
50
0
100
200
150
IOUT [mA]
0.30
0.25
Vdrop [V]
0.20
25°C
85°C
0.10
–40°C
0.05
0
50
0
100
200
150
IOUT [mA]
Vdrop [V]
4.
Dropout voltage vs. Set output voltage
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
150 mA
100 mA
80 mA
50 mA
30 mA
10 mA
0
1
2
3
VOUT(S) [V]
18
85°C
4
5
6
25°C
–40°C
0
50
100
IOUT [mA]
S-1200B50
0.15
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
150
200
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
5.
Current consumption during power-off vs. Ambient temperature
S-1200B15 (VIN 2.5 V)
0.5
ISS2 [A]
0.4
0.3
0.2
0.1
0
–40 –25
0
25
50
75 85
Ta [C]
6.
Output voltage vs. Ambient temperature
S-1200B15
S-1200B30
1.60
VOUT [V]
VOUT [V]
1.55
1.50
1.45
1.40
–40 –25
0
25
50
75 85
Ta [C]
3.20
3.15
3.10
3.05
3.00
2.95
2.90
2.85
2.80
–40 –25
0
25
50
75 85
Ta [C]
S-1200B50
5.3
VOUT [V]
5.2
5.1
5.0
4.9
4.8
4.7
–40 –25
0
25
50
75 85
Ta [C]
19
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
7.
Current consumption vs. Input voltage
S-1200B15
S-1200B30
25
25
ISS1 [A]
25°C
15
85°C
10
25°C
–40°C
20
ISS1 [A]
–40°C
20
85°C
15
10
5
5
0
0
0
1
2
3
4
5
6
7
8
9
0
10
1
2
3
4
VIN [V]
5
6
7
8
9
10
VIN [V]
S-1200B50
25
–40°C
ISS1 [A]
20
15
25°C
85°C
10
5
0
0
1
2
3
4
5
6
7
8
9
10
VIN [V]
8.
Ripple rejection
VIN 4.0 V, COUT 0.1 F
90
80
70
60
50
40
30
20
10
0
Ripple Rejection [dB]
S-1200B30 (Ta 25°C)
Ripple Rejection [dB]
S-1200B15 (Ta 25°C)
VIN 2.5 V, COUT 0.1 F
IOUT = 1 mA
50 mA
10
100
1k
10k
100k
1M
Frequency [Hz]
Ripple Rejection [dB]
VIN 6.0 V, COUT 0.1 F
IOUT = 1 mA
50 mA
10
100
1k
10k
Frequency [Hz]
20
IOUT = 1 mA
50 mA
10
100
1k
10k
Frequency [Hz]
S-1200B50 (Ta 25°C)
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
100k
1M
100k
1M
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Reference Data
Input transient response characteristics
S-1200B30 (Ta 25°C)
IOUT 30 mA, tr tf 5.0 s, COUT 0.1 F, CIN 0.1 F
IOUT 30 mA, tr tf 5.0 s, COUT 0.1 F, CIN 0.1 F
-40
-20
0
20
40
60
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
6
3.08
3.06
VOUT [V]
1.62
1.60
1.58
VIN
1.56
1.54
1.52
VOUT
1.50
1.48
1.46
VIN [V]
VOUT [V]
S-1200B15 (Ta 25°C)
3.04
4
3.02
3
3.00 VOUT
2
2.98
1
2.96
-40
80 100 120 140 160
5
VIN
-20
0
20
40
t [s]
60
VIN [V]
1.
0
80 100 120 140 160
t [s]
S-1200B50 (Ta 25°C)
5.12
5.10
VIN
5.08
5.06
5.04
5.02
VOUT
5.00
4.98
4.96
-40
-20
0
20
40
60
8
7
6
5
4
3
2
1
0
VIN [V]
VOUT [V]
IOUT 30 mA, tr tf = 5.0 s, COUT 0.1 F, CIN 0.1 F
80 100 120 140 160
t [s]
Load transient response characteristics
S-1200B15 (Ta 25°C)
S-1200B30 (Ta 25°C)
VIN 2.5 V, COUT 0.1 F, CIN 0.1 F, IOUT 50 mA100 mA
VIN 4.0 V, COUT 0.1 F, CIN 0.1 F, IOUT 50 mA100 mA
1.60
1.55
1.50
IOUT
3.15
50
3.10
0
20
40
60
150
100
IOUT
50
3.05
0
3.00 VOUT
–50
–100
2.95
–100
–150
2.90-40
–50
1.45
-40 -20
100
0
VOUT
1.40
3.20
VOUT [V]
VOUT [V]
1.65
150
IOUT [mA]
1.70
80 100 120 140 160
t [s]
IOUT [mA]
2.
–150
-20
0
20
40
60
80 100 120 140 160
t [s]
S-1200B50 (Ta 25°C)
VIN 6.0 V, COUT 0.1 F, CIN 0.1 F, IOUT 50 mA100 mA
5.20
5.10
100
IOUT
50
5.05
5.00
0
VOUT
–50
–100
4.95
4.90
-40 -20
IOUT [mA]
VOUT [V]
5.15
150
–150
0
20
40
60
80 100 120 140 160
t [s]
21
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
S-1200B15 (Ta 25°C)
S-1200B30 (Ta 25°C)
VIN 2.5 V, COUT 0.1 F, CIN 0.1 F, IOUT 30 mA
VIN 4.0 V, COUT 0.1 F, CIN 0.1 F, IOUT 30 mA
VON/OFF
VOUT [V]
3
10
6
2
8
4
1
6
2
0
1
–1
VOUT
0
–1
-0.4 -0.2
0
0.2 0.4
0.6 0.8 1.0
1.2
1.4 1.6
VOUT [V]
4
3
VON/OFF [V]
5
VON/OFF
2
0
4
2
–2
0
–3
–2
–2
VOUT
-0.4 -0.2
VON/OFF [V]
3. ON/OFF pin transient response characteristics
–4
0
0.2 0.4
t [ms]
0.6 0.8 1.0
1.2
1.4 1.6
–6
VON/OFF [V]
S-1200B50 (Ta 25°C)
VIN 6.0 V, COUT 0.1 F, CIN 0.1 F, IOUT 30 mA
20
9
6
VON/OFF
12
3
8
4
0
–4
0
–3
VOUT
-0.4 -0.2
VON/OFF [V]
VOUT [V]
16
–6
0
0.2 0.4
0.6 0.8 1.0
1.2
1.4 1.6
–9
t [ms]
4.
Input transient response characteristics Capacity Value characteristics
S-1200B15 (Ta 25°C)
1.6
1.5
1.4
VIN
COUT = 0.1 F
VOUT
COUT = 1.0 F
1.3
1.2
-40 -20
0
20
40
60
2.0
4
1.8
2
1.6
0
–2
VOUT [V]
VOUT [V]
1.7
VIN 4.5 V 2.5 V, tr 5 s, IOUT 50 mA
6
VIN [V]
1.8
1.4
6
2
VOUT
C OUT = 1.0 F
1.2
–4
1.0
–6
0.8
C OUT = 0.1 F
-40 -20
80 100 120 140 160
4
VIN
0
20
40
t [s]
5.
60
0
–2
VIN [V]
VIN 2.5 V 4.5 V, tr 5 s, IOUT 50 mA
–4
–6
80 100 120 140 160
t [s]
Load transient response characteristics Capacity Value characteristics
S-1200B15 (Ta 25°C)
VIN 2.5 V, IOUT 50 mA1 mA
1.6
1.4
IOUT
COUT = 1.0 F
0
1.8
COUT = 0.1 F
1.0
-40 -20
0
20
40
60
t [s]
22
2.0
VOUT
1.2
0.8
50
80 100 120 140 160
VOUT [V]
VOUT [V]
1.8
2.2
IOUT [mA]
2.0
100
1.6
100
50
IOUT
0
C OUT = 1.0 F
VOUT
1.4
C OUT = 0.1 F
1.2
1.0
-40 -20
0
20
40
60
t [s]
80 100 120 140 160
IOUT [mA]
VIN 2.5 V, IOUT 1 mA50 mA
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
Marking Specifications
1.
SNT-6A(H)
Top view
6
5
(1) to (3)
4
(4) to (6)
: Product code (Refer to Product name vs. Product code)
: Lot number
(1) (2) (3)
(4) (5) (6)
1
2
3
Product name vs. Product code
Product name
S-1200B15-I6T2U
S-1200B16-I6T2U
S-1200B17-I6T2U
S-1200B18-I6T2U
S-1200B19-I6T2U
S-1200B20-I6T2U
S-1200B21-I6T2U
S-1200B22-I6T2U
S-1200B23-I6T2U
S-1200B24-I6T2U
S-1200B25-I6T2U
S-1200B26-I6T2U
S-1200B27-I6T2U
S-1200B28-I6T2U
S-1200B29-I6T2U
S-1200B30-I6T2U
S-1200B31-I6T2U
S-1200B32-I6T2U
S-1200B33-I6T2U
S-1200B34-I6T2U
S-1200B35-I6T2U
(1)
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Product code
(2)
(3)
O
A
O
B
O
C
O
D
O
E
O
F
O
G
O
H
O
I
O
J
O
K
O
L
O
M
O
N
O
O
O
P
O
Q
O
R
O
S
O
T
O
U
Product name
S-1200B36-I6T2U
S-1200B37-I6T2U
S-1200B38-I6T2U
S-1200B39-I6T2U
S-1200B40-I6T2U
S-1200B41-I6T2U
S-1200B42-I6T2U
S-1200B43-I6T2U
S-1200B44-I6T2U
S-1200B45-I6T2U
S-1200B46-I6T2U
S-1200B47-I6T2U
S-1200B48-I6T2U
S-1200B49-I6T2U
S-1200B50-I6T2U
S-1200B51-I6T2U
S-1200B52-I6T2U
S-1200B53-I6T2U
S-1200B54-I6T2U
S-1200B55-I6T2U
(1)
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Product code
(2)
(3)
O
V
O
W
O
X
O
Y
O
Z
P
A
P
B
P
C
P
D
P
E
P
F
P
G
P
H
P
I
P
J
P
K
P
L
P
M
P
N
P
O
23
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
2.
SOT-23-5
Top view
5
4
(1) to (3)
: Product code (Refer to Product name vs. Product code)
(4)
: Lot number
(1) (2) (3) (4)
1
2
3
Product name vs. Product code
Product name
S-1200B15-M5T1x
S-1200B16-M5T1x
S-1200B17-M5T1x
S-1200B18-M5T1x
S-1200B19-M5T1x
S-1200B20-M5T1x
S-1200B21-M5T1x
S-1200B22-M5T1x
S-1200B23-M5T1x
S-1200B24-M5T1x
S-1200B25-M5T1x
S-1200B26-M5T1x
S-1200B27-M5T1x
S-1200B28-M5T1x
S-1200B29-M5T1x
S-1200B30-M5T1x
S-1200B31-M5T1x
S-1200B32-M5T1x
S-1200B33-M5T1x
S-1200B34-M5T1x
S-1200B35-M5T1x
(1)
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Product code
(2)
(3)
O
A
O
B
O
C
O
D
O
E
O
F
O
G
O
H
O
I
O
J
O
K
O
L
O
M
O
N
O
O
O
P
O
Q
O
R
O
S
O
T
O
U
Product name
S-1200B36-M5T1x
S-1200B37-M5T1x
S-1200B38-M5T1x
S-1200B39-M5T1x
S-1200B40-M5T1x
S-1200B41-M5T1x
S-1200B42-M5T1x
S-1200B43-M5T1x
S-1200B44-M5T1x
S-1200B45-M5T1x
S-1200B46-M5T1x
S-1200B47-M5T1x
S-1200B48-M5T1x
S-1200B49-M5T1x
S-1200B50-M5T1x
S-1200B51-M5T1x
S-1200B52-M5T1x
S-1200B53-M5T1x
S-1200B54-M5T1x
S-1200B55-M5T1x
(1)
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Product code
(2)
(3)
O
V
O
W
O
X
O
Y
O
Z
P
A
P
B
P
C
P
D
P
E
P
F
P
G
P
H
P
I
P
J
P
K
P
L
P
M
P
N
P
O
Remark 1. x: G or U
2. Please select products of environmental code = U for Sn 100%, halogen-free products.
24
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.5.1_02
S-1200 Series
3.
HSNT-6A
Top view
6
5
4
(1) to (3)
: Product code (Refer to Product name vs. Product code)
(4)
(5) to (9)
: Blank
(1) (2) (3)
: Lot number
(4) (5) (6)
(7) (8) (9)
1
2
3
Product name vs. Product code
Product name
S-1200B15-A6T1U
S-1200B16-A6T1U
S-1200B17-A6T1U
S-1200B18-A6T1U
S-1200B19-A6T1U
S-1200B20-A6T1U
S-1200B21-A6T1U
S-1200B22-A6T1U
S-1200B23-A6T1U
S-1200B24-A6T1U
S-1200B25-A6T1U
S-1200B26-A6T1U
S-1200B27-A6T1U
S-1200B28-A6T1U
S-1200B29-A6T1U
S-1200B30-A6T1U
S-1200B31-A6T1U
S-1200B32-A6T1U
S-1200B33-A6T1U
S-1200B34-A6T1U
S-1200B35-A6T1U
(1)
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Product code
(2)
(3)
O
A
O
B
O
C
O
D
O
E
O
F
O
G
O
H
O
I
O
J
O
K
O
L
O
M
O
N
O
O
O
P
O
Q
O
R
O
S
O
T
O
U
Product name
S-1200B36-A6T1U
S-1200B37-A6T1U
S-1200B38-A6T1U
S-1200B39-A6T1U
S-1200B40-A6T1U
S-1200B41-A6T1U
S-1200B42-A6T1U
S-1200B43-A6T1U
S-1200B44-A6T1U
S-1200B45-A6T1U
S-1200B46-A6T1U
S-1200B47-A6T1U
S-1200B48-A6T1U
S-1200B49-A6T1U
S-1200B50-A6T1U
S-1200B51-A6T1U
S-1200B52-A6T1U
S-1200B53-A6T1U
S-1200B54-A6T1U
S-1200B55-A6T1U
(1)
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Product code
(2)
(3)
O
V
O
W
O
X
O
Y
O
Z
P
A
P
B
P
C
P
D
P
E
P
F
P
G
P
H
P
I
P
J
P
K
P
L
P
M
P
N
P
O
25
1.57±0.03
6
5
1
2
4
+0.05
0.08 -0.02
3
0.5
0.48±0.02
0.2±0.05
No. PI006-A-P-SD-2.1
TITLE
SNT-6A(H)-A-PKG Dimensions
No.
PI006-A-P-SD-2.1
ANGLE
UNIT
mm
ABLIC Inc.
+0.1
ø1.5 -0
4.0±0.1
2.0±0.05
0.25±0.05
+0.1
1.85±0.05
ø0.5 -0
4.0±0.1
0.65±0.05
3 2 1
4
5 6
Feed direction
No. PI006-A-C-SD-2.0
TITLE
SNT-6A(H)-A-Carrier Tape
No.
PI006-A-C-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PI006-A-R-SD-1.0
TITLE
SNT-6A(H)-A-Reel
No.
PI006-A-R-SD-1.0
ANGLE
UNIT
QTY.
mm
ABLIC Inc.
5,000
0.52
1.36
2
0.52
0.2 0.3
1.
2.
1
(0.25 mm min. / 0.30 mm typ.)
(1.30 mm ~ 1.40 mm)
1.
2.
3.
4.
0.03 mm
SNT
1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).
2. Do not widen the land pattern to the center of the package (1.30 mm to 1.40 mm).
Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.
2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm
or less from the land pattern surface.
3. Match the mask aperture size and aperture position with the land pattern.
4. Refer to "SNT Package User's Guide" for details.
1.
2.
(0.25 mm min. / 0.30 mm typ.)
(1.30 mm ~ 1.40 mm)
No. PI006-A-L-SD-4.1
TITLE
SNT-6A(H)-A
-Land Recommendation
No.
PI006-A-L-SD-4.1
ANGLE
UNIT
mm
ABLIC Inc.
2.9±0.2
1.9±0.2
4
5
1
2
+0.1
0.16 -0.06
3
0.95±0.1
0.4±0.1
No. MP005-A-P-SD-1.3
TITLE
SOT235-A-PKG Dimensions
No.
MP005-A-P-SD-1.3
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1(10 pitches:40.0±0.2)
+0.1
ø1.5 -0
+0.2
ø1.0 -0
2.0±0.05
0.25±0.1
4.0±0.1
1.4±0.2
3.2±0.2
3 2 1
4
5
Feed direction
No. MP005-A-C-SD-2.1
TITLE
SOT235-A-Carrier Tape
No.
MP005-A-C-SD-2.1
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. MP005-A-R-SD-1.1
SOT235-A-Reel
TITLE
No.
MP005-A-R-SD-1.1
ANGLE
QTY.
UNIT
mm
ABLIC Inc.
3,000
1.96±0.05
1.78±0.05
6
1
5
0.5
4
2
3
0.5
0.5
0.12±0.04
0.48±0.02
0.22±0.05
The heat sink of back side has different electric
potential depending on the product.
Confirm specifications of each product.
Do not use it as the function of electrode.
No. PJ006-A-P-SD-3.1
TITLE
HSNT-6A-A-PKG Dimensions
No.
PJ006-A-P-SD-3.1
ANGLE
UNIT
mm
ABLIC Inc.
+0.1
4.0±0.1
2.0±0.05
ø1.5 -0
ø0.5±0.1
2.25±0.05
0.25±0.05
0.65±0.05
4.0±0.1
3 21
0.5
0.5
0.5
0.5
0.5
0.5
4 5 6
Feed direction
No. PJ006-A-C-SD-2.0
TITLE
HSNT-6A-A-Carrier Tape
No.
PJ006-A-C-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PJ006-A-R-SD-1.0
TITLE
HSNT-6A-A-Reel
No.
PJ006-A-R-SD-1.0
QTY.
ANGLE
UNIT
mm
ABLIC Inc.
5,000
Land Recommendation
0.5
0.7
0.7
0.35
0.35
0.3
1.4
2.1
Caution It is recommended to solder the heat sink to a board
in order to ensure the heat radiation.
PKG
Stencil Opening
0.5
0.2
0.8
0.8
0.3
0.2
1.6
2.0
TITLE
HSNT-6A-A
-Land &Stencil Opening
PJ006-A-LM-SD-1.1
No.
ANGLE
No. PJ006-A-LM-SD-1.1
UNIT
mm
ABLIC Inc.
Disclaimers (Handling Precautions)
1.
All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2.
The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products
described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other
right due to the use of the information described herein.
3.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described
herein.
4.
Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to
the use of the products outside their specified ranges.
5.
Before using the products, confirm their applications, and the laws and regulations of the region or country where they
are used and verify suitability, safety and other factors for the intended use.
6.
When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related
laws, and follow the required procedures.
7.
The products are strictly prohibited from using, providing or exporting for the purposes of the development of
weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands
caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear,
biological or chemical weapons or missiles, or use any other military purposes.
8.
The products are not designed to be used as part of any device or equipment that may affect the human body, human
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by
ABLIC, Inc. Do not apply the products to the above listed devices and equipments.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of
the products.
9.
In general, semiconductor products may fail or malfunction with some probability. The user of the products should
therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread
prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social
damage, etc. that may ensue from the products' failure or malfunction.
The entire system in which the products are used must be sufficiently evaluated and judged whether the products are
allowed to apply for the system on customer's own responsibility.
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the
product design by the customer depending on the intended use.
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be
careful when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.
13. The information described herein contains copyright information and know-how of ABLIC Inc. The information
described herein does not convey any license under any intellectual property rights or any other rights belonging to
ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this
document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express
permission of ABLIC Inc.
14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales
representative.
15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into
the English language and the Chinese language, shall be controlling.
2.4-2019.07
www.ablic.com
工商网监
湘ICP备2023018690号
