OYEBCJJANF-50.000000

Enhanced Stability Crystal Oscillator OX-A/OY-A Series-3.2 X 2.5 / 2.5 X 2.0 mm SMD Crystal Oscillator FEATURE - Tight Tolerance:±5 ppm accuracy @25°C, ±5 ppm over -40°C to +85°C - LVCMOS Output Logic - Tight symmetry (45 to 55%) available. - Operation voltage: 1.8V, 2.5V, 3.3V. - Tri-state enable/disable. - Femto second phase jitter and-152dBc/Hz at 10kHz offset. Actual Size TYPICAL APPLICATION - Wireless Connectivity - Video Distribution RoHS Compliant DIMENSION (mm) SOLDER PAD L AYOUT (mm) 2.10 ± 0.15 #2 #2 0.35 0.95 ± 0.15 Pin# 1 2 3 4 2.10 Function 1.20 Tri-state GND Output VDD To ensure optimal oscillator performance, place a by-pass capacitor of 0.1μF as close to the part as possible between Vdd and GND pads. 0.1 μF [ B O T T O M V IE W ] [ TO P VIEW ] 1.625 ± 0.10 #2 #2 #1 Pin# 1 2 3 4 0.80 1.22 #4 0.675 ± 0.1 0.85 ± 0.15 0.29 #3 0.57 ± 0.10 1.225 ± 0.10 #3 2.00 ± 0.20 2.50 ± 0.20 #1 #1 0.90 ± 0.15 [ S ID E V IE W ] [ S ID E V IE W ] 0.65 ± 0.15 1.65 ± 0.15 2.50 ± 0.15 #1 #4 1.60 #3 #3 1.10 3.20 ± 0.15 #4 0.1 μF [ B O T T O M V IE W ] [ TO P VIEW ] #4 Actual Size 1.62 0.675 ± 0.1 Function 0.90 Tri-state GND Output VDD To ensure optimal oscillator performance, place a by-pass capacitor of 0.1μF as close to the part as possible between Vdd and GND pads. ELECTRICAL SPECIFICATION 3.3V Parameter Supply Voltage Variation (VDD) Frequency Range Max. Min. Max. VDD-10% VDD+10% VDD-10% VDD+10% VDD-10% VDD+10% V 19 _ 60 19 _ 60 19 _ 60 MHz 5 mA 45 55 _ 45 55 _ 45 55 _ % 10 2.97 _ Output High (Logic “1”) Output Low (Logic “0”) 0.33 _ Transition Time: Rise/Fall Time+ 8 _ Start Time Tri-State(Input to Pin 1) Enable (High voltage or floating) 5 _ 2.31 _ Disable (Low voltage or GND) 0.99 _ RMS Phase Jitter (integrated 12 kHz ~ 20 MHz) Phase Noise @ 26 MHz Unit Min. Duty Cycle Output Level (CMOS) 1.8V Max. 19 ≦Fo ≦60 MHz Supply Current 2.5V Min. 1 7 2.25 _ 0.25 _ 8 _ 5 _ 1.75 _ 0.75 _ 1 1.62 _ V 0.18 _ _ 1.26 _ 8 nSec 5 _ mSec V 0.54 _ 1 pSec 10 Hz -90 -90 -90 dBc/Hz 100 Hz -115 -115 -115 dBc/Hz 1 kHz -136 10 kHz _ Aging (@25°C 1st year) Storage Temp. Range -136 -152 -55 ±1 _ 125 -55 -152 ±1 _ 125 -55 -136 dBc/Hz -152 dBc/Hz ±1 ppm 125 °C Standard frequencies are frequencies which the crystal has been designed and does not imply a stock position +Transition times are measured between 10% and 90% of VDD, with an output load of 15pF FREQ. STABILITY vs. TEMP. RANGE Temp. (°C) -10 ~ +60 -20 ~ +70 -40 ~ +85 -40 ~ +105 ppm ±5 ±10 ±15 * O: Available △:Conditional X: Not available *Inclusive of calibration @ 25°C, operating temperature range, input voltage variation, load variation, aging (1st year), shock, and vibration Note: not all combination of options are available. Other specifications may be available upon request. Specifications subject to change without notice. www.taitien.com sales@taitien.com.tw 33