MEC6-170-02-L-DV-A

MICRO EDGE CARD SYSTEMS 0.50 mm, 0.635 mm, 0.80 mm, 1.00 mm, 1.27 mm, 2.00 mm PITCH FEATURES & BENEFITS • Up to 56 Gbps PAM4 • PCI Express® 4.0 (MEC5 Series) • Solutions for .062" (1.60 mm), and .093" (2.36 mm) thick cards • Choice of pitch: 0.50 mm, 0.635 mm, 0.80 mm, 1.00 mm, 1.27 mm, 2.00 mm • Vertical, right-angle, edge mount Staggered press-fit tails (MEC8-VP) • Available in surface mount and through-hole Justification beam ensures card and body are flushed (MEC5) KEY SPECIFICATIONS SERIES PITCH TOTAL POSITIONS INSULATOR MATERIAL CONTACT MATERIAL OPERATING TEMP RANGE CURRENT RATING VOLTAGE RATING LEAD-FREE SOLDERABLE MEC5 0.50 mm 60-200 Black LCP Phosphor Bronze -55 ℃ to +125 ℃ 1.5 A (2 pins) 125 VAC Yes MEC6 0.635 mm 20-140 Black LCP Phosphor Bronze -55 ℃ to +125 ℃ 2.4 A (2 pins) 195 VAC Yes MEC8 0.80 mm 20-140 Black LCP Phosphor Bronze -55 ℃ to +125 ℃ 1.8 A (4 pins) 185 VAC Yes MEC1 1.00 mm 20-140 Black LCP Phosphor Bronze -55 ℃ to +125 ℃ 2.2 A (2 pins) 250 VAC Yes MECF 1.27 mm 10-100 Black/Natural LCP BeCu -55 ℃ to +125 ℃ 3.5 A (2 pins) 280 VAC Yes MEC2 2.00 mm 10-100 Black/Natural LCP BeCu -55 ℃ to +125 ℃ 3.5 A (2 pins) 238 VAC Yes F-221 samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice. 14 G b p s (0.635 mm) .025" PITCH • VERTICAL AND RIGHT-ANGLE EDGE CARD SOCKET MEC6 - 1 - POSITIONS PER ROW - 02 10, 20, 30, 40, 50, 60, 70 - PLATING OPTION DV - - A –L - OPTION “X”R -K Leave blank for Tray Packaging No. = of (5.50 Positions x (0.635) mm) 2.17".025 DIA+ (7.94) .313 = 10 µ" (0.25 µm) Gold on contact, Matte Tin on tail B Polyimide Pick –TR & Place Pad A = Tape & Reel No. of Positions x (0.635) .025 + (7.94) .313 No. of Positions x (0.635) B .025 + (7.94) .313 B A A MEC6-DV Card Mates: (1.60 mm) .062" thick card (3.81) .150 POSITIONS PER ROW A B 50 (21.06) .829 (36.49) 1.437 60 (24.87) .979 (42.84) 1.687 70 (28.68) 1.129 (49.19) 1.937 No. of Positions x (0.635) .025 + (4.77) .188 No. of Positions x (0.635) .025 + (1.565) .062 (3.81) .150 (3.81) .150 (7.00) No. of Positions x (0.635) .025 + (4.77) .188 .276 No. of Positions x (0.635) .025 + .025 (4.77) .188 No. of Positions x (0.635) + (1.565)x .062 No. of Positions (0.635) .025 + (1.565) .062 (8.80) .346 (7.00) .276 (7.00) .276 (8.50) .335 10, 20, 30 & 40 POSITIONS No. of Positions x (0.635) .025 + (7.94) .313 (8.65) .341 (8.80) .346 (8.80) .346 B A 10. 20. 30 & 40 = No. of Positions x (0.635) .025 + (2.37) .093 50. 60 & 70 = No. of Positions x (0.635) .025 + (3.00) .118 –FR = Full Reel Tape & Reel (must order max. quantity per reel; contact Samtec for quantity breaks) (8.50) .335 (8.50) .335 (8.65) .341 (8.65) .341 10. 20. 30 & 40 = No. of Positions (0.635) (2.37) .093 10.x20. 30 & .025 40 = +No. of Positions x (0.635) (2.37) .093 50. 60 & 70.025 = No.+ of Positions x (0.635) + (3.00) .118 50. 60 & 70.025 = No. of Positions x (0.635) .025 + (3.00) .118 (3.81) .150 50, 60 & 70 POSITIONS No. of Positions x (0.635) .025 + (4.77) .188 No. of Positions x (0.635) .025 + (1.565) .062 View complete specifications at: samtec.com?MEC6-DV MEC6 - 1 - POSITIONS PER ROW (7.00) .276 02 - (8.50) .335 10, 20, 30, 40, 50 No. of Positions x (0.635) .025 + (3.17) .125 MEC6-RA 10. 20. 30 & 40 = No. of Positions x (0.635) .025 + (2.37) .093 50. 60 & 70 = No. of Positions x (0.635) .025 + (3.00) .118 (7.40) PLATING (8.80) .346 OPTION - D - - TAIL (8.65) No. of.341 Positions x (0.635) .025 + (3.17) .125 –L –RA1 = 10 µ" (0.25 µm) Gold on contact, Matte Tin on tail –TR = Right angle = Tape & Reel –FR (7.40) .291 = Full Reel Tape & Reel (must order max. quantity per reel; contact Samtec for quantity breaks) .291 Card Mates: (1.60 mm) .062" No. of Positions x (0.635) .025 + (1.57) .062 thick card No. of Positions x (0.635) .025 + (1.57) .062 (5.78) .227 (5.78) .227 No. of Positions x (0.635) .025 + (3.17) .125 (9.10) .358 (38.09) 1.50 OPTIONS 10, 20, 30 & 40 POSITIONS (38.09) 1.50 (9.10) .358 (7.40) .291 No. of Positions x (0.635) .025 + (3.17) .125 No. of Positions x (0.635) .025 + (1.57) .062 (7.40) .291 (5.78) .227 50 POSITIONS Note: Some sizes, styles and options are non-standard, non-returnable. (9.10) .358 No. of Positions x (0.635) .025 + (1.57) .062 (38.09) 1.50 (5.78) .227 View complete specifications at: samtec.com?MEC6-RA samtec.com/EdgeCard (9.10) .358 Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice. F-221