The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
DF1E Series
UL, C-CL Listed
Full lock function
added
Inner-lock system
full lock mechanism
Mis-insertion
prevention
Photo 1
■Features
1. Full Lock Function Added
Double lock
engaged
The inner lock system adopts a full lock mechanism.
This mechanism prevents disengagement to occur due to
an unexpected external shock. (Refer to photo 1)
Double lock
engaged
2. Increase in Crimping Contact Fixation Force and
Semi-insertion Prevention
The double lock is activated for the use method to give a
stress to the cable, to increase crimping contact fixation
force, and to prevent the semi-insertion of the crimping
contact. (Refer to photo 2)
3. Mold Lance Adopted
Since the contact lance may be deformed involving in the
contact after the crimping process, the mold lance has been
adopted.
4. Mis-insertion Prevention
Equipped with the mechanism to completely prevent reverse
insertion and insertion between dissimilar contacts.
5. Means to Prevent Solder Crack
The glass enforcement resin is adopted for the pin header to
prevent a solder crack to occur due to heat compression.
6. Correspond to Potting
Corresponding to potting, the pin header is provided for
product variations.
Corresponding to potting up to 8mm and mounting height
19.8mm (no retainer), the low profile is achieved.
7. Production Facility Cost Reduction
The female crimping contact uses the DF1B series crimping
contact, which has been conventionally marketed.
Investment for new facilities isn't needed. However, if the
retainer is installed in the cable with AWG#22 or more wire,
use the DF1E crimping contact. The female crimping
contact for in-line is used together with the DF1B applicator.
Therefore, no investment is needed for new facilities.
B146
Photo 2
8. Various Applications
With the same series, various applications can
be used for the board solder dip type and inline.
9. Listed by UL, C-UL
■Applications
Electronic equipment, office machines,
industrial equipment, and consumer
equipment, and so on
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Products Specifications
Current rating Note 1.
AWG#20 to 24 :
3A
26 :
2A
28 :
1A
30 : 0.5A
Voltage rating 250VAC
Rating
Operating Temperature Range : -35 to +85ç Note 2.
Operating Moisture Range : -40 to 80%
Storage Temperature Range : -10 to +60ç Note 3.
Storage Moisture Range
: -40 to 70% Note 3.
■UL/C-UL File No. and Recognition No.
UL
:E52653
C-UL :E52653
C-UL Rating
AWG#20 to #22 : 3A
Current rating
AWG#24 to #28 : 1A
Rating
AWG#30
Voltage rating
: 0.5A
30V AC
Item
Specification
Condition
1. Contact Resistance
30m ohms max.
Measured at 20mV max. and 1mA
2. Insulation Resistance
1000M ohms min.
500V DC
3. Withstanding voltage
No flashover or insulation breakdown.
650V AC/1 minute
4. Single Insertor/Extraction Forth
MIN 0.29N, MAX 4.41N
Measured at the square steel pin with 0.635±0.002
5. Durability (Mating/un-mating)
30m ohms max
30 cycles
6. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
7. Shock
No electrical discontinuity of 1µs or more
Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis
8. Humidity (Steady state)
30m ohms max
96 hours at temperature of 40±2ç and humidity of 90% to 95%
9. Temperature Cycle
30m ohms max.
(-55ç: 30 minutes-> 5 to 35ç: 5 minutes-> 85ç: 30 minutes-> 5 to 35ç: 5 minutes) 5 cicles
10. Resistance to Soldering heat
No deformation of components affecting performance.
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Current rating of header is 3A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Material
Product
Part
Material
Treatment
Remarks
Socket
Insulator
Polyamide
White
UL94V-0
Insulator
Polyamide
Beige
UL94V-0
Contact
Brass
Tin-lead plated
–––––––
In-line Plug
Insulator
Polyamide
White
UL94V-0
retainer
Insulator
Polyamide
Black
UL94V-0
Crimping contact
Contact
Phosphor copper
Tin plated
–––––––
Header
B147
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Ordering Information
●Pin Header
DF1E C - * P - 2.5 DSA
q
w
e
r
t
y
q Series Name : DF1E
w Hold Types (Note. 1)
Standard Product
Potting
With Boss
C
Without Boss
With Boss
G
Without Boss
e Number of Contacts : 2 to 15 contacts
(note. 2)
r Connector Type
P : Pin Header
t Contact Pitch : 2.5mm
y Form type
DSA : Straight through hole
DS : Right Angle Type
Note 1 : The right angle pin header has no symbol.
Note 2 : The potting header has 2 to 10 contacts.
●Socket
q Series Name : DF1E
DF1E - * S - 2.5 C
q
w
e
r
w Number of Contacts : 2 to 15 contacts
t
e Connector type
S: Socket
r Contact Pitch : 2.5mm
t Form Type
C : Crimping socket
●In-line Plug
DF1E A - * EP - 2.5 C
q
w
e
r
t
y
q Series Name : DF1E
e Number of Contacts : 2 to 10 contacts
w In-line Plug type
r EP : In-line plug
Blank: With Panel mount Lock
t Contact Pitch : 2.5mm
A : Without Panel mount Lock
y Form Type
C : Crimping socket
●Crimping Contact
q Series Name :
DF1E - ** SCF
q
w
w Applicable Cable Size
Socket side : DF1B (Note 1)
e
DF1E (Note 1)
Plug side
: DF1E
2022 : AWG#20 to #22
2428 : WG#24 to #28
30
: AWG#30
e Packaging Type
SCF : Female contact : Reel
SC
: Female contact : Bag
PCF : Male contact : Reel
PC
: Male contact : Bag
Note 1 : When the retainer is used, use DF1E-2022SC(F), DF1B2428SC(F), and DF1B-30SC(F) contacts.
Note 1 : When no retainer is used, all DF1B-**SC(F) and DF1E2022SC(F) contacts can be used.
●Retainer
DF1E - * RS/P - 2.5
q
w
e
r
q Series Name : DF1E
w Number of Contacts : 2 to 10 contacts
e Connector Type
RS/P : Retainer
Commonly used for socket and in-line plug
r Contacts Pitch:2.5mm
B148
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Application Pattern
Socket
Retainer
Photo : Contact Inserted
Pin Header
●Straight Type
In-line Plug
●In-line Plug (Panel Mount Lock Type)
Photo: Contact Inserted
●Straight Potting Type
●In-line Plug
Photo: Contact Inserted
●Right Angle Type
B149
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Right Angle Pin Header
Contact
No. mark
10
Mold Cavity
No. mark
5.9
A
2.9
0.5
8
6.95
5.4
M 0.64
P=2.5
A
Contact
No.1 indicated
8.3
4.5
10.8
13.8
B
3.2
Note 2
Part Number
CL No.
Number of Contacts
A
B
DF1E –02P–2.5DS(**)
541 – 0985– 0 –**
2
02.5
07.5
DF1E –03P–2.5DS(**)
541 – 0986– 3 –**
3
05.0
10.0
DF1E –04P–2.5DS(**)
541 – 0987– 6 –**
4
07.5
12.5
DF1E –05P–2.5DS(**)
541 – 0988– 9 –**
5
10.0
15.0
DF1E –06P–2.5DS(**)
541 – 0989– 1 –**
6
12.5
17.5
DF1E –07P–2.5DS(**)
541 – 0990– 0 –**
7
15.0
20.0
DF1E –08P–2.5DS(**)
541 – 0991– 3 –**
8
17.5
22.5
DF1E –09P–2.5DS(**)
541 – 0992– 6 –**
9
20.0
25.0
DF1E –10P–2.5DS(**)
541 – 0993– 9 –**
10
22.5
27.5
DF1E –11P–2.5DS(**)
541 – 0994– 1 –**
11
25.0
30.0
DF1E –12P–2.5DS(**)
541 – 0995– 4 –**
12
27.5
32.5
DF1E –13P–2.5DS(**)
541 – 0996– 7 –**
13
30.0
35.0
DF1E –14P–2.5DS(**)
541 – 0997– 0 –**
14
32.5
37.5
DF1E –15P–2.5DS(**)
541 – 0998– 2 –**
15
35.0
40.0
RoHS
[Specific No.] –* *, (* *)
(01): Gold plated
(05): Tin plated
Yes
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 4
contact connector is contained in the center at one point.
Note 3. : Styles of 2 to 4 contact connectors partially differ from those in above figures.
BPCB mounting pattern (Board Thickness t = 1.6 ± 0.1)
A±0.1
P = 2.5±0.05
*
–
Ø1
.1
+
0
B150
0.
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Straight Pin Header
Contact
No. mark
10
Mold Cavity
No. mark
5.9
A
0.5
8
6.95
5.4
P=2.5
A
Contact
No.1 indicated
3.6
10.8
8.3
4.5
B
M 0.64
3.2
Note 2
Part Number
CL No.
Number of Contacts
A
B
DF1EC–02P–2.5DSA(**)
541– 0867– 4 –**
2
02.5
07.5
DF1EC–03P–2.5DSA(**)
541– 0868– 7 –**
3
05.0
10.0
DF1EC–04P–2.5DSA(**)
541– 0869– 0 –**
4
07.5
12.5
DF1EC–05P–2.5DSA(**)
541– 0870– 9 –**
5
10.0
15.0
DF1EC–06P–2.5DSA(**)
541– 0871– 1 –**
6
12.5
17.5
DF1EC–07P–2.5DSA(**)
541– 0872– 4 –**
7
15.0
20.0
DF1EC–08P–2.5DSA(**)
541– 0873– 7 –**
8
17.5
22.5
DF1EC–09P–2.5DSA(**)
541– 0874– 0 –**
9
20.0
25.0
DF1EC–10P–2.5DSA(**)
541– 0875– 2 –**
10
22.5
27.5
DF1EC–11P–2.5DSA(**)
541– 0876– 5 –**
11
25.0
30.0
DF1EC–12P–2.5DSA(**)
541– 0877– 8 –**
12
27.5
32.5
DF1EC–13P–2.5DSA(**)
541– 0878– 0 –**
13
30.0
35.0
DF1EC–14P–2.5DSA(**)
541– 0879– 3 –**
14
32.5
37.5
DF1EC–15P–2.5DSA(**)
541– 0880– 2 –**
15
35.0
40.0
RoHS
[Specific No.] –* *, (* *)
(01): Gold plated
(05): Tin plated
Yes
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 2
and 3 contacts are not contained, and 4 contact is in the center at one point.
Note 3. : Styles of 2 to 4 contacts partially differ from those in above figures.
BPCB mounting pattern (Board Thickness t = 1.6 ± 0.1)
A±0.1
P = 2.5±0.05
*
–
Ø1
.1
+
0
0.
1
B151
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
5.4
Contact
No. mark
Mold Cavity
No. mark
A
10
5.9
C
6.95
■Straight Pin Header for Potting
P=2.5
A
B
8.3
16.3
M 0.64
3.2
3
4.5
Contact
No.1 indicated
Note 2
Note 2
Part Number
CL No.
Number of Contacts
A
B
C
DF1EG –02P–2.5DSA(**)
541 – 0923 – 3**
2
02.5
07.5
8.0
DF1EG –03P–2.5DSA(**)
541 – 0924 – 6**
3
05.0
10.0
8.0
DF1EG –04P–2.5DSA(**)
541 – 0925 – 9**
4
07.5
12.5
8.0
DF1EG –05P–2.5DSA(**)
541 – 0926 – 1**
5
10.0
15.0
7.8
DF1EG –06P–2.5DSA(**)
541 – 0927 – 4**
6
12.5
17.5
7.8
DF1EG –07P–2.5DSA(**)
541 – 0928 – 7**
7
15.0
20.0
7.8
DF1EG –08P–2.5DSA(**)
541 – 0929 – 0**
8
17.5
22.5
7.8
DF1EG –09P–2.5DSA(**)
541 – 0930 – 9**
9
20.0
25.0
7.8
DF1EG –10P–2.5DSA(**)
541 – 0931 – 1**
10
22.5
27.5
7.8
DF1EG –11P–2.5DSA(**)
541 – 0932 – 4**
11
25.0
30.0
7.8
RoHS
[Specific No.] –* *, (* *)
(05): Tin plated
Yes
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. The 2 to 5 and 9 to 10
contacts are not contained, but the 6 contact is bonded to the convex portion at both ends.
Note 3. : Styles of 2 to 4 contact may partially differ from the above figures.
BPCB mounting pattern (Board Thickness t = 1.6 ± 0.1)
A±0.1
P = 2.5±0.05
*
–
Ø1
.1
+
0
B152
0.
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■In-line Plug (Panel Mount Lock Type)
2.8
A
0.9
10
A
6.9
8.1
2.8
B
P=2.5 Mold Cavity
No. mark
Contact No. mark
Contact
No.1 indicated
12
18.8
C
10
Contact
No. mark
9
7
5
3
1
Contact
No. mark
Note 2
Photo: Contact Inserted.
Note 3
Part Number
CL No.
Number of Contacts
A
B
C
DF1E–02EP–2.5C
541– 0943– 0
DF1E–03EP–2.5C
541– 0944– 3
DF1E–04EP–2.5C
DF1E–05EP–2.5C
D
E
2
8.0
2.5
3
10.5
5.0
15.0
8.4
11.9
17.5
10.9
14.4
541– 0945– 6
4
13.0
541– 0946– 9
5
15.5
7.5
20.0
13.4
16.9
10.0
22.5
15.9
19.4
DF1E–06EP–2.5C
541– 0947– 1
6
18.0
DF1E–07EP–2.5C
541– 0948– 4
7
20.5
12.5
25.0
18.4
21.9
15.0
27.5
20.9
24.4
DF1E–08EP–2.5C
541– 0949– 7
8
DF1E–09EP–2.5C
541– 0950– 6
9
23.0
17.5
30.0
23.4
26.9
25.5
20.0
32.5
25.9
29.4
DF1E–10EP–2.5C
541– 0951– 9
10
28.0
22.5
35.0
28.4
31.9
RoHS
Yes
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends.
Note 3. In regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures.
Note 4. Use the no radius side at the panel edge in the looking area.
Note 5. : Panel fixation is loosened. (May be enlarged according to the panel board thickness.)
Note 6. : Styles of 2 to 4 contact partially differ from those in the above figures.
* Refer to page B156 for the retainer.
BPanel Cutout
(E+X)
Panel Thickness
X
1.7 to 2.0
1.5
1.3 to 1.6
1.0
0.9 to 1.2
0.5
0.7 to 0.8
0.0
5.8
+0.2
0
1.1 +0.1
0
D
+0.1
0
+0.1
0
Note 4
4.2±0.05
3.5
+0.1
0
+0.1
8.4 0
Panel
B153
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■In-line Plug
A
B
0.9
P=2.5
Mold Cavity
No. mark
Contact No. mark
A
6.9
8.1
10
Contact
No.1 indicated
18.8
Photo: Contact Inserted
10
9
7
5
1
3
Contact
No. mark
Note 2
Contact
No. mark
Note 3
Part Number
CL No.
Number of Contacts
A
B
DF1EA –02EP–2.5C
541 – 0957 – 5
2
08.0
02.5
DF1EA –03EP–2.5C
541 – 0958 – 8
3
10.5
05.0
DF1EA –04EP–2.5C
541 – 0959 – 0
4
13.0
07.5
DF1EA –05EP–2.5C
541 – 0960 – 0
5
15.5
10.0
DF1EA –06EP–2.5C
541 – 0961 – 2
6
18.0
12.5
DF1EA –07EP–2.5C
541 – 0962 – 5
7
20.5
15.0
DF1EA –08EP–2.5C
541 – 0963 – 8
8
23.0
17.5
DF1EA –09EP–2.5C
541 – 0964 – 0
9
25.5
20.0
DF1EA –10EP–2.5C
541 – 0965 – 3
10
28.0
22.5
RoHS
Yes
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends.
Note 3. : 2 to 7 contacts do not contain two convex portions, which is different from the above figure.
Note 4. : Styles of 2 to 4 contacts partially differ from the above figures.
* Refer to page B156 for retainer.
B154
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
4.55
■Socket
P=2.5
A
B
C
8.5
11.8
Note 2
Photo: Contact Inserted
10
1
Contact
No.1 indicated
Contact
No. mark
7.55
A
Mold Cavity
No. mark
Note 3
Note 3
Note 4
Note 4
Part Number
CL No.
Number of Contacts
A
B
C
DF1E –02S–2.5C
541 – 0811 – 0
2
02.5
08.0
05.4
DF1E –03S–2.5C
541 – 0812 – 2
3
05.0
10.5
07.9
DF1E –04S–2.5C
541 – 0813 – 5
4
07.5
13.0
10.4
DF1E –05S–2.5C
541 – 0814 – 8
5
10.0
15.5
12.9
DF1E –06S–2.5C
541 – 0815 – 0
6
12.5
18.0
15.4
DF1E –07S–2.5C
541 – 0816 – 3
7
15.0
20.5
17.9
DF1E –08S–2.5C
541 – 0817 – 6
8
17.5
23.0
20.4
22.9
DF1E –09S–2.5C
541 – 0818 – 9
9
20.0
25.5
DF1E –10S–2.5C
541 – 0819 – 1
10
22.5
28.0
25.4
DF1E –11S–2.5C
541 – 0820 – 0
11
25.0
30.5
27.9
DF1E –12S–2.5C
541 – 0821 – 3
12
27.5
33.0
30.4
DF1E –13S–2.5C
541 – 0822 – 6
13
30.0
35.5
32.9
DF1E –14S–2.5C
541 – 0823 – 9
14
32.5
38.0
35.4
DF1E –15S–2.5C
541 – 0824 – 1
15
35.0
40.5
37.9
RoHS
Yes
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 contact connector is equipped with the convex portion to prevent false-insertion.
Note 3. : The 2 consult Has no wall on the locking side
Note 4. : The 2 to 5 contacts contain the retainer fixed convex portions at both ends.
* Refer to page B156 for the retainer.
B155
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Retainer
A
1.9
B
1.7
P = 2.5
1.5
3.3
5.9
0.7
Note2
Note2
Contact No. mark
A1
0
Mold Cavity
No. mark
Part Number
CL No.
Number of Contacts
A
B
DF1E –02RS/P–2.5
541 – 0971 – 6
2
08.0
02.5
DF1E –03RS/P–2.5
541 – 0972 – 9
3
10.5
05.0
DF1E –04RS/P–2.5
541 – 0973 – 1
4
13.0
07.5
DF1E –05RS/P–2.5
541 – 0974 – 4
5
15.5
10.0
DF1E –06RS/P–2.5
541 – 0975 – 7
6
18.0
12.5
DF1E –07RS/P–2.5
541 – 0976 – 0
7
20.5
15.0
DF1E –08RS/P–2.5
541 – 0977 – 2
8
23.0
17.5
DF1E –09RS/P–2.5
541 – 0978 – 5
9
25.5
20.0
DF1E –10RS/P–2.5
541 – 0979 – 8
10
28.0
22.5
RoHS
Yes
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 to 4 contacts contain socket and plug fixed holes at both ends.
* This retainer can be used together with the socket and relay plug.
B156
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Plug Crimping Contact
0.68
2
1.2
2.4
18.9
13.9
0.64
●Applicable Cable (Tin plating annealed copper wire)
●Recommended Cable
UL1061, UL1007
Conductor Size (Wire construction)
●Strip Length
AWG # 20 (21 cores./0.18mm)
3.0 to 3.7mm
Note : If other cables are used instead of the applicable
cable, contact Hirose sales department.
AWG # 22 (17 cores./0.16mm)
AWG # 24 (11 cores./0.16mm)
AWG # 26 (07 cores./0.16mm)
AWG # 28 (07 cores./0.127mm)
AWG # 30 (07 cores./0.1mm)
Part Number
CL No.
DF1E – 2022PCF
541 – 0937 – 8
DF1E – 2022PC
541 – 0938 – 0
DF1E – 2428PCF
541 – 0939 – 3
DF1E – 2428PC
541 – 0940 – 2
DF1E – 30PCF
541 – 0941 – 5
DF1E – 30PC
541 – 0942 – 8
Applicable Cable
Applicable
Cable Indication
AWG
Jacket Diameter
20
22
AWG # 20
AWG # 22
1.2 to 1.9mm
24
28
AWG # 24
AWG # 28
0.9 to 1.5mm
30
AWG # 30
0.6 to 1.2mm
Packaging
Type
Quantity
Reel
10,000
Bag
100
Reel
10,000
Bag
100
Reel
10,000
Bag
100
RoHS
Yes
● Crimping Contact Extraction Tool DF-C-PO(B)
B157
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
■Socket Crimping Contact
●DF1E-2022SCF
●DF1B - * * * * SCF
1.75
1.75
0.975
1.95
1.4
Applicable cable indicated
0.83
1.95
2.5
9.5
14
9.4
3.35
2.55
Applicable cable indicated
1.6
1.4
1.4
2.4
1
6.1
12.9
1.6
0.55
●Applicable Cable (Tin plating annealed copper wire)
●Recommended Cable
UL1061, UL1007
Conductor Size (Wire construction)
●Strip Length
AWG # 20 (21 cores./0.18mm)
2.0mm to 2.5mm
Note : If other cables are used instead of the applicable
cable, consult Hirose sales department.
AWG # 22 (17 cores./0.16mm)
AWG # 24 (11 cores./0.16mm)
AWG # 26 (07 cores./0.16mm)
AWG # 28 (07 cores./0.127mm)
AWG # 30 (07 cores./0.1mm)
Part Number
CL No.
DF1E – 2022SCF
541 – 0999 – 5
DF1E – 2022SC
541 – 1000 – 2
DF1B – 2022SCF
541 – 0223 – 1
DF1B – 2022SC
541 – 0224 – 4
DF1B – 2428SCF
541 – 0678 – 1
DF1B – 2428SC
541 – 0679 – 4
DF1B – 30SCF
541 – 0682 – 9
DF1B – 30SC
541 – 0683 – 1
AWG
Jacket Diameter
20
22
AWG # 20
AWG # 22
1.2 to 1.9mm
20
22
AWG # 20
AWG # 22
1.2 to 1.9mm
24
28
AWG # 24
AWG # 28
0.9 to 1.5mm
30
AWG # 30
0.6 to 1.2mm
● Crimping Contact Extraction Tool DF-C-PO(B)
B158
Applicable Cable
Applicable
Cable Indication
Packaging
Type
Quantity
Reel
10,000
Bag
100
Reel
10,000
Bag
100
Reel
10,000
Bag
100
Reel
10,000
Bag
100
RoHS
Yes
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
BCrimping Tools
Item
Part Number
CL No.
901 – 4561 – 0
DF1E – 2022SCF
AP105 – DF1B – 2022S
K
K
901 – 4510 – 9
DF1B – 2022SCF
AP105 – DF1B – 2428S
K
K
901 – 4518 – 0
DF1B – 2428SCF
AP105 – DF1B – 30S
K
K
901 – 4517 – 8
DF1B – 30SCF
AP105 – DF1B – 2022P
K
K
901 – 4509 – 0
DF1E – 2022PCF
AP105 – DF1B – 2428P
K
K
901 – 4521 – 5
DF1E – 2428PCF
AP105 – DF1B – 30P
K
K
901 – 4519 – 3
DF1E – 30PCF
CM – 105
K
K
901 – 0005 – 4
AP105 – DF1E – 2022S
Applicator
Main Press Unit
HT102/DF1E – 2022S
Manual Crimping Tool
Contact Extraction Tool
Applicable Contact
––––––
550 – 0277 – 1
DF1E – 2022SC
DF1B – TA2022SHC
K
K
550 – 0182 – 7
DF1B – 2022SC
DF1B – TA2428SHC
K
K
550 – 0209 – 1
DF1B – 2428SC
DF1B – TA30SHC
K
K
550 – 0211 – 3
DF1B – 30SC
HT102/DF1BE – 2022P
550 – 0278 – 4
DF1E – 2022PC
HT102/DF1BE – 2428P
550 – 0279 – 7
DF1E – 2428PC
HT102/DF1BE – 30P
550 – 0280 – 6
DF1E – 30PCF
DF – C – PO (B)
550 – 0179 – 2
DF1E – 2022SC (F)
DF1B – * * * * SC (F)
DF1E – * * * * PC (F)
K " to the last number of the product, in order to use DF1B series tools, which have been conventionally merchandized.
Note 1. : Add "K
Note 2. : If any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products.
B159
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
BApplication Pattern
●Standard Header
8.5
DF1E _ * S _ 2.5 C
DF1E _ * RS / P _ 2.5
DF1E# _ * P _ 2.5 DSA
18.8
17.3
DF1E _ * P _ 2.5 DS (**)
8.5
14.3
15.8
DF1E _ * RS / P _ 2.5
DF1E _ * S _ 2.5 C
3.7
10.8
3
14.3
●Header for Potting
8
DF1E _ * S _ 2.5 C
DF1E _ * RS / P _ 2.5
11.7
8 MAX
19.8
21.3
Potting Resin
DF1E# _ * P _ 2.5 DSA
3.2
●Panel Mounting Lock In-line Plug
●In-line Plug
25.3
25.3
17
DF1E _ * RS / P _ 2.5
DF1E _ * RS / P _ 2.5
DF1E _ * S _ 2.5 C
DF1E _ * RS / P _ 2.5
DF1E _ * S _ 2.5 C
DF1EA _ * EP _ 2.5 C
DF1E _ * EP _ 2.5 C
15.5
22.3
B160
9
9
8.1
Panel
DF1E _ * RS / P _ 2.5
22.3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
BPrecautions
1. Recommended Soldering Condition
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
2. Cleaning Condition
Refer to Nylon Connector Use Hand book.
However, if the connector is cleaned by the potting header, the detergent remains within the
connector, which will cause malfunction.
3. Connection Condition
Refer to Nylon Connector Use Hand book.
4. Cautions
● To remove the connector, if the connector is forcedly removed, it will cause connector
damage. If the connector is hardly removed, slightly push the connector once, and then
remove it using the lock.
● In some method for laying the cable within equipment, a tension may be applied to the
cable so as to remove the contact. In this case, it is recommended to use the retainer.
● Incomplete insertion of the contact can be prevented by mounting a retainer; however,
mounting of a retainer might not be possible when the contact protrudes beyond the
socket. Insert the contact securely and then mount the retainer.
● If the potting process is implemented, it is desirable to fill the connector with resin,
considering the resin surface tensile force.
● The color phase of this product may be slightly different from that of the forming product
according to the manufacturing lot and future storage conditions, however the difference
doesn't affect the performance.
5. Precautions
Refer to Nylon Connector Use Hand book.
B161
工商网监
湘ICP备2023018690号
