SCIHP1350-3R3M

SCIHP1350 SMD POWER INDUCTORS MARKING ● Features 1. Lowest DCR/uH in this small package size. 2. Frequency range up to 5.0MHZ. 3. -55℃ to +125℃ operating temperature. 4. Handles high transient current spikes without saturation. 5. Composite construction providing extremely low buzz noise. ELECTRICAL CHARACTERISTICS Part Number Inductance Test (uH) Frequency (1) Saturation DC Current Resistance (3) (Ω MAX) (A) Temperature Current(4) (A) 100 10 SCIHP1350 Inductance decrease by current BCIHP1350 Inductance by current 4.3m 35 18 2.2 200KHZ 6.3m 28 17 SCIHP1350-4R7M 4.7 200KHZ 15m 21 11 SCIHP1350-5R6M 5.6 200KHZ 17.6m 19 10.5 6.8 200KHZ 19.8m 18 10 1.5 SCIHP1350-2R2M SCIHP1350-1R5M SCIHP1350-6R8M Inductance (uH) Inductance (µH) (2) 200KHZ 6R8 4R7 1R5 1. 0 0 100 1000 DC DCcurrent(mA) current (mA) 10000 100000 Temperature rise °C ℃ Temperature rise SCIHP1350 Temperature Temperature rise BCIHP1350 riseby bycurrent current 80 70 60 50 40 30 20 10 0 6R8 5000 4R7 10000 15000 1R5 20000 25000 30000 DCcurrent(mA) current (mA) DC (1). Inductance tolerance ±20% tested at 0.25V, 0ADC and 25℃ (2). DCR measured at 25℃. (3). The DC current at which the inductance decreases by 20% from its initial value. (4). The DC current that results in a 40℃ temperature rise from 25℃ ambient (*). Part temperature (ambient + temp rise) should not exceed 125℃ under worst case operating conditions. Circuit design, component placement, PCB trace size and thickness, airflow and other cooling provisions may affect the temperature of the part. Part temperature should be verified in the end application. Click here for QUANTITY PER REEL & PACKING INFORMATION Custom versions available upon request. belfuse.com/signal © 2019 Signal Transformer –Specification subject to change without notice. 12.19 176 128 Atlantic Avenue, Lynbrook, NY 11563 Toll Free 866-239-5777 • Tel 516-239-5777 • Fax 516-239-7208 Sales@signaltransformer.com • techhelp@signaltransformer.com