SCIHP0530-1R5

SCIHP0530 SMD POWER INDUCTORS 1.0±0.3 3.0MAX 7.0 XXX XXX 2.5 1.5±0.3 4.9MAX 5.2MAX 3.0 MARKING ● Features 1. Lowest DCR/uH in this small package size. 2. Frequency range up to 3.0MHZ. 3. -55℃ to +125℃ operating temperature (*). 4. Handles high transient current spikes without saturation. 5. Composite construction providing extremely low buzz noise. ELECTRICAL CHARACTERISTICS DC Saturation Temperature Test Inductance Resistance Current Current Frequency (uH) (mΩ MAX) (A) (3) (A) (4) (1) SCIHP0530-R68 SCIHP0530-1R0 100 (2) 0.68 200KHz 12.0 14.0 8.5 1.00 200KHz 14.0 11.0 7.0 SCIHP0530-1R5 1.50 200KHz 25.0 10.0 6.0 SCIHP0530-2R2 2.20 200KHz 35.0 9.0 5.5 SCIHP0530-3R3 3.30 200KHz 38.0 7.0 5.0 SCIHP0530-4R7 4.70 200KHz 60.0 5.0 3.0 Inductance (uH) Part Number BCIHP0530 Inductance byby current SCIHP0530 Inductancedecrease decrease current 10 4R7 1.0 1R5 R68 0.1 0.01 10 1000 100 100000 10000 Temperature rise℃ DC current(mA) 80 70 60 50 40 30 20 10 0 SCIHP0530 Temperature by current BCIHP0530Temperature Temperaturerise riserise by current SCIHP0530 by current 4R7 1R5 R68 2000 4000 6000 8000 1000012000 140001600018000 DC current(mA) (1). Inductance tolerance ±20% tested at 0.25V, 0ADC and 25℃ (2). DCR measured at 25℃. (3). The DC current at which the inductance decreases by 20% from its initial value. (4). The DC current that results in a 40℃ temperature rise from 25℃ ambient (*). Part temperature (ambient + temp rise) should not exceed 125℃ under worst case operating conditions. Circuit design, component placement, PCB trace size and thickness, airflow and other cooling provisions may affect the temperature of the part. Part temperature should be verified in the end application. Click here for QUANTITY PER REEL & PACKING INFORMATION © 2019 Signal Transformer –Specification subject to change without notice. 12.19 Custom versions available upon request. belfuse.com/signal 199 128 Atlantic Avenue, Lynbrook, NY 11563 Toll Free 866-239-5777 • Tel 516-239-5777 • Fax 516-239-7208 Sales@signaltransformer.com • techhelp@signaltransformer.com