WL05JT2N8

Data Sheet Customer: Product: SMD Wire Wound Chip Inductor-WL Series Sizes.: 0402/0603/0805/1008/1206 Issued Date: 10-Jun-20 Edition: REV.D VIKING TECH CORPORATION 光頡科技股份有限公司 VIKING TECH CORPORATION KAOHSIUNG BRANCH 光頡科技股份有限公司高雄分公司 VIKING ELECTRONICS (WUXI) CO., LTD. 光頡電子(無錫)有限公司 No.70 Guangfu N. Rd., Hukou Township, Hsinchu County 303, Taiwan No.248-3, Sin-Sheng Rd., Cian-Jhen Dist., Kaohsiung, 806, Taiwan TEL:886-3-5972931 FAX:886-3-5972935•886-3-5973494 E-mail:sales@viking.com.tw TEL:886-7-8217999 FAX:886-7-8228229 E-mail:sales@viking.com.tw No.22 Xixia Road, Machinery & Industry Park, National Hi-Tech Industrial Development Zone of Wuxi, Wuxi, Jiangsu Province, China Zip Code:214028 TEL:86-510-85203339 FAX:86-510-85203667•86-510-85203977 E-mail:china@viking.com.tw Produced by (QC) Checked (QC) Approved by (QC) 10-Jun-20 10-Jun-20 10-Jun-20 Dandanzhong Mchen Mchen Prepared by (Sales) Accepted by (Customer) 【WL Series】 SMD Wire Wound Chip Inductor ■Scope －Ceramic body and wire wound construction provide highest SRFs available ….. ■Features －Ceramic base provide high SRF －Ultra-compact inductors provide high Q factors －Low profile, high current are available －Miniature SMD chip inductor for fully automated assembly －Outstanding endurance from Pull-up force, mechanical shock and pressure －Tighter tolerance down to ±2% －Smaller size of 0402 (1005) －AEC-Q200 Compliance (Standard Type except Size 1206) ■Applications －Smart Phone, Remote Control, Security System －Wireless Mouse / Keyboard / Earphone －VCO, RF Module & Other Wireless Products －Base Station, Repeater －GPS Receiver, WiFi, Bluetooth, Zigbee －Antenna Matching and Filter －CATV Filter, Tuner, Set Top Box －IT Applications as USB 3.0 , IEEE 1394 ■Construction     Ceramic Core  Magnet Wire  Electrode  UV Glue  www.viking.com.tw For detail questions, contact : sales@viking.com.tw 1 Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor Overall B ■Dimensions A H C F I G J F Pad Layout I D E Terminal Terminal Wraparound: Approx. 0.007” /0.18mm Both Ends Standard Unit: mm Type Size (Inch) A max. B max. C max. D Ref. E F G H I J Weight (g) (1000pcs) WL02 0402 1.27 0.76 0.61 0.15 0.51 0.23 0.56 0.66 0.50 0.46 0.8 WL03 0603 1.80 1.12 1.02 0.38 0.76 0.33 0.86 1.02 0.64 0.64 3.46 WL05 0805 2.29 1.73 1.52 0.51 1.27 0.44 1.02 1.78 1.02 0.76 12.13 WL08 1008 2.92 2.79 2.13 0.65 2.03 0.51 1.52 2.54 1.02 1.27 30.73 WL06 1206 3.56 2.16 1.52 0.51 1.62 0.51 2.20 1.93 1.02 1.80 40 High Current / High Q Unit: mm Type Size (Inch) A max. B max. C max. D Ref. E F G H I J WL02 0402 1.27 0.76 0.61 0.15 0.51 0.23 0.56 0.66 0.50 0.46 WL03 0603 1.80 1.12 1.02 0.38 0.76 0.33 0.86 1.02 0.64 0.64 WL05 0805 2.29 1.73 1.52 0.51 1.27 0.44 1.02 1.78 1.02 0.76 WL08 1008 2.92 2.79 2.03 0.65 2.03 0.51 1.52 2.54 1.02 1.27 ■Part Numbering WL 02 J T Product Type Dimensions (L×W) 02: 0402 03: 0603 05: 0805 08: 1008 06: 1206 Inductance Tolerance C: ±0.2nH D: ±0.5nH G: ±2% H: ±3% J: ±5% K: ±10% Packaging Code T: Taping Reel www.viking.com.tw 1N6 Design Code : Standard Inductor H: High Current and High Q S: HP4287 Q: High Q & Low DCR For detail questions, contact : sales@viking.com.tw 2 Inductance 1N6: 1.6nH 82N: 82nH R27: 270nH 1R0: 1000nH 103: 10000nH Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor ■Standard Electrical Specifications WL02 Wire Wound Chip Inductors / Standard Type Inductance (nH) Tolerance L Freq. (MHz) Quality Factor min. SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 1.0 1.9 2.0 2.2 2.4 ±10% ±10% ±10% ±10% ±10% 250 250 250 250 250 16 16 16 19 15 12.70 11.30 11.10 10.80 10.50 0.045 0.070 0.070 0.070 0.070 1360 1040 1040 960 790 L 1.02 1.72 1.93 2.19 2.24 Q 77 68 54 59 51 L 1.02 1.74 1.93 2.23 2.27 Q 69 82 75 100 68 2.7 3.3 3.6 3.9 4.3 ±10% ±10% ±5, ±10% ±5, ±10% ±5, ±10% 250 250 250 250 250 16 19 19 19 18 10.40 7.00 6.80 5.80 6.00 0.120 0.066 0.066 0.066 0.091 640 840 840 840 700 2.23 3.10 3.56 3.89 4.19 42 65 45 50 47 2.25 3.12 3.62 4.00 4.30 61 87 71 75 71 4.7 5.1 5.6 6.2 6.8 ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% 250 250 250 250 250 18 20 20 20 20 4.70 4.80 4.80 4.80 4.80 0.130 0.083 0.083 0.083 0.083 640 800 760 760 680 4.55 5.15 5.16 6.16 6.56 48 56 54 52 63 4.68 5.25 5.28 6.37 6.93 68 82 81 76 78 7.5 8.2 8.7 9.0 9.5 ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% 250 250 250 250 250 22 22 18 22 18 4.80 4.40 4.10 4.16 4.00 0.104 0.104 0.200 0.104 0.200 680 680 480 680 480 7.91 8.50 8.78 9.07 9.42 60 57 54 62 54 8.22 8.85 9.21 9.53 9.98 88 84 73 78 69 10 11 12 13 15 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 21 24 24 24 24 3.90 3.68 3.60 3.45 3.28 0.195 0.120 0.120 0.210 0.172 480 640 640 440 560 9.80 10.70 11.90 13.40 14.60 50 52 53 51 55 10.10 11.20 12.70 14.60 15.50 67 78 71 57 77 16 18 19 20 22 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 24 25 24 25 25 3.10 3.10 3.04 3.00 2.80 0.220 0.230 0.202 0.250 0.300 560 420 480 420 400 16.60 18.30 19.10 20.70 23.20 46 57 50 52 53 18.80 20.30 21.10 23.70 26.80 47 62 67 53 53 23 24 27 30 33 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 24 25 24 25 24 2.72 2.70 2.48 2.35 2.35 0.300 0.300 0.300 0.350 0.350 400 400 400 400 400 23.80 25.10 28.70 31.10 34.90 49 51 49 46 31 26.90 29.50 33.50 38.50 41.70 64 50 63 39 32 36 39 40 43 47 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 24 25 24 25 25 2.32 2.10 2.24 2.03 2.10 0.440 0.550 0.500 0.810 0.830 320 200 320 100 150 39.50 41.70 39.00 45.80 50.00 44 47 44 46 38 48.40 50.20 47.40 61.60 55.80 53 45 33 34 37 51 56 68 82 100 120 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 250 25 25 22 22 22 20 1.75 1.76 1.62 1.26 1.16 >1.80 0.820 0.970 1.120 1.550 2.000 2.660 100 100 100 50 30 50 50.40 57.40 69.60 - 47 49 45 - 59.40 72.40 83.40 - 37 40 38 - www.viking.com.tw For detail questions, contact : sales@viking.com.tw 3 900MHz 1.7GHz Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor WL03 Wire Wound Chip Inductors / Standard Type Inductance (nH) Tolerance 1.6 1.8 2.2 2.3 3.3 3.6 3.9 4.3 4.5 4.7 5.1 5.6 6.2 6.3 6.8 7.5 8.2 8.7 9.1 9.5 10 11 12 15 16 17 18 20 22 23 24 27 30 33 36 39 43 47 51 56 62 68 72 82 91 100 110 120 130 140 150 160 180 220 260 270 280 300 330 390 470 ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% www.viking.com.tw L Freq. (MHz) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 200 200 200 200 200 200 150 150 150 150 150 150 150 100 100 100 100 100 100 100 100 100 100 100 100 Quality Factor min. 24 16 15 16 22 22 22 22 20 25 20 20 25 25 27 28 27 28 35 28 31 31 35 35 35 35 35 40 38 38 38 40 40 40 37 40 38 38 38 38 37 37 34 34 30 34 32 32 30 28 28 25 25 25 25 25 25 25 25 25 23 SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 12.5 12.5 6.00 >4.00 >6.00 5.80 >6.00 5.80 5.80 5.80 5.80 5.80 5.80 5.80 5.80 4.80 4.80 4.80 4.80 5.40 4.80 4.00 4.00 4.00 3.30 3.20 3.10 3.00 3.00 2.85 2.80 2.80 2.80 2.30 2.30 2.20 2.00 2.00 1.90 1.90 1.80 1.70 1.70 1.70 1.70 1.40 1.35 1.30 1.40 1.30 1.30 1.30 1.25 1.20 1.00 0.90 1.00 0.75 0.90 0.90 0.60 0.030 0.045 0.100 0.140 0.080 0.063 0.080 0.063 0.120 0.120 0.160 0.170 0.110 0.110 0.110 0.106 0.110 0.109 0.130 0.135 0.130 0.086 0.130 0.170 0.110 0.170 0.170 0.190 0.190 0.190 0.130 0.220 0.150 0.220 0.250 0.250 0.280 0.280 0.280 0.310 0.340 0.340 0.490 0.540 0.500 0.580 0.610 0.650 0.720 0.870 0.950 1.400 1.400 1.600 2.000 2.100 2.400 2.500 3.800 4.350 3.600 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 600 600 600 600 600 600 600 600 600 600 600 600 400 400 400 300 300 300 280 280 280 250 250 200 200 100 150 100 100 80 For detail questions, contact : sales@viking.com.tw 4 900MHz L 1.53 1.63 2.18 2.32 3.35 3.53 3.95 4.32 4.74 4.65 5.13 5.53 6.28 6.67 6.75 7.70 8.25 8.86 9.20 9.70 10.0 11.3 12.3 15.4 16.5 17.6 18.7 20.7 22.8 24.1 25.7 29.2 31.4 36.0 39.1 42.7 46.9 52.2 55.5 62.5 68.0 80.5 82.0 96.2 110.0 124.0 138.0 166.0 185.0 190.0 230.0 215.0 305.0 377.0 469.0 523.0 524.0 539.7 680.4 734.5 - Q 35 35 41 32 47 49 49 49 55 53 47 56 60 41 60 60 64 62 70 59 66 53 72 64 55 56 70 80 73 71 45 74 47 67 47 60 44 62 69 56 40 54 53 54 50 49 43 39 60 80 25 20 22 21 21 19 18 21 20 29 - 1.7GHz L 1.58 1.66 2.20 2.35 3.40 3.58 3.96 4.43 4.87 4.80 5.36 5.86 6.40 6.86 7.10 7.82 8.40 9.32 9.70 9.92 10.6 12.1 13.5 16.8 18.0 19.4 21.4 23.5 26.1 28.0 30.9 34.6 39.8 49.5 48.9 60.2 60.3 77.2 82.2 97.0 110 168 135 177 416.4 319.5 342.7 529.3 - Q 55 50 64 40 65 65 67 67 92 67 56 77 85 61 81 65 81 58 80 61 83 56 83 89 52 44 69 30 71 71 40 65 28 42 24 40 21 35 34 26 10 21 20 21 6 13 15 8 - Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor WL05 Wire Wound Chip Inductors / Standard Type Inductance (nH) Tolerance L Freq. (MHz) Quality Factor min. SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 2.7 2.8 3.0 3.3 3.9 4.7 5.6 6.2 6.8 7.5 8.2 8.7 10 12 15 18 20 22 24 27 30 33 36 39 43 47 56 62 68 72 75 82 91 100 110 120 130 150 160 180 200 220 240 250 270 300 330 360 390 430 470 560 600 620 680 750 820 1000 1200 ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 200 200 200 200 200 150 150 150 150 150 150 150 150 100 100 100 100 100 100 100 100 100 100 100 100 50 50 25 25 25 25 25 25 25 7.9 80 @ 1500MHz 80 @ 1500MHz 65 @ 1500MHz 50 @ 1500MHz 50 @ 1500MHz 65 @ 1000MHz 65 @ 1000MHz 50 @ 1000MHz 50 @ 1000MHz 50 @ 1000MHz 50 @ 1000MHz 50 @ 1000MHz 60 @ 500MHz 50 @ 500MHz 50 @ 500MHz 50 @ 500MHz 55 @ 500MHz 55 @ 500MHz 50 @ 500MHz 55 @ 500MHz 60 @ 500MHz 60 @ 500MHz 55 @ 500MHz 60 @ 500MHz 60 @ 500MHz 60 @ 500MHz 60 @ 500MHz 60 @ 500MHz 60 @ 500MHz 65 @ 500MHz 65 @ 500MHz 65 @ 500MHz 65 @ 500MHz 65 @ 500MHz 50 @ 250MHz 50 @ 250MHz 50 @ 250MHz 50 @ 250MHz 50 @ 250MHz 50 @ 250MHz 50 @ 250MHz 50 @ 250MHz 44 @ 250MHz 50 @ 250MHz 48 @ 250MHz 48 @ 250MHz 48 @ 250MHz 48 @ 250MHz 48 @ 250MHz 33 @ 100MHz 33 @ 100MHz 23 @ 50MHz 23 @ 50MHz 23 @ 50MHz 23 @ 50MHz 23 @ 50MHz 23 @ 50MHz 20 @ 50MHz 18 @ 25MHz 7.900 7.900 7.900 6.000 5.500 5.500 5.500 5.500 5.500 4.500 4.700 4.000 4.200 4.000 3.400 3.300 2.600 2.600 2.000 2.500 2.050 2.050 1.700 2.000 1.650 1.650 1.550 1.500 1.450 1.400 1.350 1.300 1.200 1.200 1.000 1.100 0.980 0.920 0.870 0.870 0.860 0.850 0.690 0.680 0.650 0.620 0.600 0.580 0.560 0.430 0.375 0.340 0.260 0.220 0.200 0.200 0.200 0.100 0.100 0.06 0.06 0.06 0.08 0.08 0.08 0.08 0.11 0.11 0.14 0.12 0.21 0.10 0.15 0.17 0.20 0.22 0.22 0.22 0.25 0.25 0.27 0.27 0.29 0.34 0.31 0.34 0.36 0.38 0.40 0.41 0.42 0.48 0.46 0.48 0.51 0.54 0.56 0.60 0.64 0.66 0.70 1.00 1.00 1.00 1.20 1.40 1.45 1.50 1.70 1.70 1.90 1.60 2.20 2.20 2.30 2.35 2.50 2.50 800 800 800 600 600 600 600 600 600 600 600 400 600 600 600 600 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 400 400 400 400 400 400 400 400 400 400 400 350 350 350 330 310 300 290 230 250 230 450 210 190 180 180 170 170 www.viking.com.tw For detail questions, contact : sales@viking.com.tw 5 Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor WL05 Wire Wound Chip Inductors / Standard Type ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% L Freq. (MHz) 7.9 7.9 7.9 7.9 Quality Factor min. 16 @ 25MHz 16 @ 7.9MHz 16 @ 7.9MHz 16 @ 7.9MHz 3300 ±2, ±5, ±10% 7.9 3900 4700 ±2, ±5, ±10% ±2, ±5, ±10% 7.9 7.9 Quality Factor min. 50 @ 1500MHz Inductance (nH) Tolerance 1500 1800 2200 2700 SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 0.100 0.080 0.060 0.050 2.50 2.50 2.70 3.10 170 170 160 150 15 @ 7.9MHz 0.040 4.40 90 15 @ 7.9MHz 15 @ 7.9MHz 0.40 0.040 4.41 6.40 90 90 SRF (GHz) min. DCR (Ω) max. IDC (mA) max. WL08 Wire Wound Chip Inductors / Standard Type Inductance (nH) Tolerance 3.3 ±5, ±10% L Freq. (MHz) 50 4.000 0.15 1000 4.7 ±5, ±10% 50 50 @ 1500MHz 4.000 0.15 1000 *5.6 ±5, ±10% 50 50 @ 1500MHz 4.000 0.15 1000 *10 ±2, ±5, ±10% 50 50 @ 500MHz 4.100 0.08 1000 *12 ±2, ±5, ±10% 50 50 @ 500MHz 3.300 0.09 1000 *15 ±2, ±5, ±10% 50 50 @ 500MHz 2.500 0.11 1000 *18 ±2, ±5, ±10% 50 50 @ 350MHz 2.400 0.12 1000 *22 ±2, ±5, ±10% 50 55 @ 350MHz 2.400 0.12 1000 24 ±2, ±5, ±10% 50 55 @ 350MHz 1.900 0.13 1000 *27 ±2, ±5, ±10% 50 55 @ 350MHz 1.600 0.13 1000 30 ±2%,±5%,±10% 50 60 @ 350MHz 1.600 0.14 1000 *33 ±2, ±5, ±10% 50 60 @ 350MHz 1.600 0.14 1000 36 ±2, ±5, ±10% 50 60 @ 350MHz 1.600 0.15 1000 *39 ±2, ±5, ±10% 50 60 @ 350MHz 1.500 0.15 1000 *47 ±2, ±5, ±10% 50 65 @ 350MHz 1.500 0.16 1000 *56 ±2, ±5, ±10% 50 65 @ 350MHz 1.300 0.18 1000 *62 ±2, ±5, ±10% 50 65 @ 350MHz 1.250 0.20 1000 *68 ±2, ±5, ±10% 50 65 @ 350MHz 1.300 0.20 1000 75 ±2, ±5, ±10% 50 60 @ 350MHz 1.100 0.21 1000 *82 ±2, ±5, ±10% 50 60 @ 350MHz 1.000 0.22 1000 91 ±2, ±5, ±10% 50 50 @ 350MHz 1.000 0.45 1000 *100 ±2, ±5, ±10% 25 60 @ 350MHz 1.000 0.56 650 *120 ±2, ±5, ±10% 25 60 @ 350MHz 0.950 0.63 650 *150 ±2, ±5, ±10% 25 45 @ 100MHz 0.850 0.70 800 160 ±2, ±5, ±10% 25 45 @ 100MHz 0.800 0.75 650 *180 ±2, ±5, ±10% 25 45 @ 100MHz 0.750 0.77 620 *220 ±2, ±5, ±10% 25 45 @ 100MHz 0.700 0.84 500 *240 ±2, ±5, ±10% 25 45 @ 100MHz 0.650 0.88 500 *270 ±2, ±5, ±10% 25 45 @ 100MHz 0.600 0.91 690 *300 ±2, ±5, ±10% 25 45 @ 100MHz 0.585 1.00 450 *330 ±2, ±5, ±10% 25 45 @ 100MHz 0.570 1.05 450 *360 ±2, ±5, ±10% 25 45 @ 100MHz 0.530 1.10 470 *390 ±2, ±5, ±10% 25 45 @ 100MHz 0.500 1.12 630 *430 ±2, ±5, ±10% 25 45 @ 100MHz 0.480 1.15 470 *470 ±2, ±5, ±10% 25 45 @ 100MHz 0.450 1.19 470 *560 ±2, ±5, ±10% 25 45 @ 100MHz 0.415 1.33 580 *620 ±2, ±5, ±10% 25 45 @ 100MHz 0.375 1.40 300 *680 ±2, ±5, ±10% 25 45 @ 100MHz 0.375 1.47 540 *750 ±2, ±5, ±10% 25 45 @ 100MHz 0.360 1.54 360 *820 ±2, ±5, ±10% 25 45 @ 100MHz 0.350 1.61 400 *910 ±2, ±5, ±10% 25 35 @ 50MHz 0.320 1.68 380 www.viking.com.tw For detail questions, contact : sales@viking.com.tw 6 Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor WL08 Wire Wound Chip Inductors / Standard Type ±2, ±5, ±10% L Freq. (MHz) 25 Quality Factor min. 35 @ 50MHz ±2, ±5, ±10% 7.9 35 @ 50MHz *1500 ±2, ±5, ±10% 7.9 *1800 ±2, ±5, ±10% *2200 *2700 *3300 *3900 *4700 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 5600 6800 8200 10000 12000 15000 Inductance (nH) Tolerance *1000 *1200 SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 0.290 1.75 370 0.250 2.00 310 28 @ 50MHz 0.200 2.30 330 7.9 28 @ 50MHz 0.160 2.60 300 7.9 7.9 7.9 7.9 7.9 28 @ 50MHz 22 @ 25MHz 22 @ 25MHz 18 @ 25MHz 18 @ 25MHz 0.160 0.140 0.110 0.100 0.090 2.80 3.20 3.40 3.60 4.00 280 290 290 260 260 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 7.9 7.9 7.9 2.52 2.52 16 @ 7.96MHz 15 @ 7.96MHz 15 @ 7.96MHz 15 @ 7.96MHz 15 @ 7.96MHz 0.020 0.040 0.025 0.020 0.018 4.00 4.90 6.00 9.00 10.5 240 200 170 150 130 ±2, ±5, ±10% 2.52 15 @ 7.96MHz 0.015 11.5 120 " * " Test Methods / Instrument: Network / Spectrum Analyzer WL08(S) Wire Wound Chip Inductors / Standard Type Inductance (nH) Tolerance 10 12 18 22 27 30 33 39 43 47 56 62 68 82 100 120 150 180 220 240 270 300 330 360 390 430 470 560 620 680 750 820 1000 1200 1800 2200 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% www.viking.com.tw L Freq. (MHz) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 7.9 7.9 7.9 Quality Factor min. 50 @ 500MHz 50 @ 500MHz 50 @ 350MHz 55 @ 350MHz 55 @ 350MHz 60 @ 350MHz 60 @ 350MHz 60 @ 350MHz 60 @ 350MHz 65 @ 350MHz 65 @ 350MHz 65 @ 350MHz 65 @ 350MHz 60 @ 350MHz 60 @ 350MHz 60 @ 350MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 45 @ 100MHz 35 @ 50MHz 35 @ 50MHz 28 @ 50MHz 28 @ 50MHz SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 4.100 3.300 2.400 2.400 1.600 1.600 1.600 1.500 1.500 1.500 1.300 1.250 1.300 1.000 1.000 0.950 0.850 0.750 0.700 0.650 0.600 0.585 0.570 0.530 0.500 0.480 0.450 0.415 0.375 0.375 0.360 0.350 0.290 0.250 0.160 0.160 0.08 0.09 0.12 0.12 0.13 0.14 0.14 0.15 0.16 0.16 0.18 0.20 0.20 0.22 0.56 0.63 0.70 0.77 0.84 0.88 0.91 1.00 1.05 1.10 1.12 1.15 1.19 1.33 1.40 1.47 1.54 1.61 1.75 2.00 2.60 2.80 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 650 650 800 620 500 500 690 450 450 470 630 470 470 580 300 540 360 400 370 310 300 280 For detail questions, contact : sales@viking.com.tw 7 Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor WL06 Wire Wound Chip Inductors / Standard Type Inductance (nH) Tolerance L Freq. (MHz) Quality Factor min. SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 6.8 ±5, ±10% 100 30 @ 300MHz 5.50 0.07 1000 10 ±5, ±10% 100 40 @ 300MHz 4.00 0.08 1000 12 ±5, ±10% 100 40 @ 300MHz 3.20 0.08 1000 15 ±5, ±10% 100 40 @ 300MHz 3.20 0.10 1000 18 ±5, ±10% 100 50 @ 300MHz 2.80 0.10 1000 22 ±5, ±10% 100 50 @ 300MHz 2.20 0.10 1000 24 ±5, ±10% 100 50 @ 300MHz 2.00 0.10 1000 27 ±2, ±5, ±10% 100 50 @ 300MHz 1.80 0.11 1000 33 ±2, ±5, ±10% 100 55 @ 300MHz 1.80 0.11 1000 39 ±2, ±5, ±10% 100 55 @ 300MHz 1.80 0.12 1000 47 ±2, ±5, ±10% 100 55 @ 300MHz 1.50 0.13 1000 56 ±2, ±5, ±10% 100 55 @ 300MHz 1.45 0.14 1000 62 ±2, ±5, ±10% 100 55 @ 300MHz 1.20 0.20 1000 68 ±2, ±5, ±10% 100 55 @ 300MHz 1.20 0.26 950 82 ±2, ±5, ±10% 100 55 @ 300MHz 1.20 0.21 920 91 ±2, ±5, ±10% 100 55 @ 300MHz 1.10 0.24 900 100 ±2, ±5, ±10% 100 55 @ 300MHz 1.10 0.26 850 120 ±2, ±5, ±10% 100 55 @ 300MHz 0.75 0.26 800 150 ±2, ±5, ±10% 100 60 @ 300MHz 0.95 0.31 750 180 ±2, ±5, ±10% 50 55 @ 300MHz 0.90 0.43 700 220 ±2, ±5, ±10% 50 55 @ 300MHz 0.76 0.50 670 270 ±2, ±5, ±10% 50 55 @ 300MHz 0.74 0.56 630 300 ±2, ±5, ±10% 50 50 @ 150MHz 0.68 0.60 600 330 ±2, ±5, ±10% 50 45 @ 150MHz 0.65 0.62 590 360 ±2, ±5, ±10% 50 45 @ 150MHz 0.60 0.65 550 390 ±2, ±5, ±10% 50 45 @ 150MHz 0.60 0.75 530 470 ±2, ±5, ±10% 50 45 @ 150MHz 0.55 1.30 490 560 ±2, ±5, ±10% 35 45 @ 150MHz 0.47 1.34 460 620 ±2, ±5, ±10% 35 45 @ 150MHz 0.47 1.58 460 680 ±2, ±5, ±10% 35 45 @ 150MHz 0.45 1.58 430 750 ±2, ±5, ±10% 35 45 @ 150MHz 0.44 2.25 320 820 ±2, ±5, ±10% 35 45 @ 150MHz 0.42 1.82 400 910 ±2, ±5, ±10% 35 45 @ 150MHz 0.41 2.95 310 1000 ±2, ±5, ±10% 35 45 @ 150MHz 0.40 2.80 320 1200 ±2, ±5, ±10% 35 45 @ 150MHz 0.38 3.20 300 SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 12.50 5.90 5.90 5.80 3.70 0.030 0.048 0.054 0.054 0.059 2400 2300 2200 2100 2100 ■High Current Electrical Specifications WL03(H) Wire Wound Chip Inductors / High Current Type ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% L Freq. (MHz) 250 250 250 250 250 Quality Factor min. 24 24 25 35 38 8.2 10 12 15 18 ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 38 38 38 38 40 3.70 3.70 3.00 2.80 2.80 0.060 0.071 0.075 0.080 0.099 2000 2000 2000 1900 1900 22 24 ±2, ±5, ±10% ±2, ±5, ±10% 250 250 42 42 2.40 2.40 0.099 0.105 1800 1800 Inductance (nH) Tolerance 1.6 3.6 3.9 6.8 7.5 www.viking.com.tw For detail questions, contact : sales@viking.com.tw 8 Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor ■High Q Electrical Specifications WL02(H) Wire Wound Chip Inductors /High Q Type Inductance (nH) 1.0 2.0 2.2 2.4 2.7 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 8.7 9.0 9.5 10 11 12 13 15 16 18 19 20 21 22 23 24 25 26 27 30 33 36 37 39 40 43 47 51 L Freq. (MHz) Tolerance ±0.2nH, ±0.5nH, ±5%, ±10% ±0.2nH, ±0.5nH, ±5%, ±10% ±0.2nH, ±0.5nH, ±5%, ±10% ±0.2nH, ±0.5nH, ±5%, ±10% ±0.2nH, ±0.5nH, ±5%, ±10% ±0.2nH, ±0.5nH, ±5%, ±10% ±0.2nH, ±0.5nH, ±5%, ±10% ±0.2nH, ±0.5nH, ±5%, ±10% ±0.5nH, ±5%, ±10% ±0.5nH, ±5%, ±10% www.viking.com.tw ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% ±2%, ±5%, ±10% Quality Factor 900MHz 1.7GHz 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 46 58 60 60 62 66 65 64 63 58 54 73 73 68 60 68 68 67 64 62 68 66 62 62 57 58 61 58 48 60 60 55 57 56 62 61 61 59 57 56 56 52 48 52 250 75 85 86 83 85 95 94 98 90 83 76 105 100 94 82 95 95 92 90 90 98 100 82 85 77 74 88 76 62 74 77 71 73 74 86 87 80 76 72 84 75 68 62 59 SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 16.0 15.2 15.1 14.0 13.0 12.8 11.7 9.50 7.15 6.85 6.80 6.50 5.80 5.80 5.40 5.40 5.00 5.00 4.70 4.70 4.70 4.40 4.20 3.90 3.70 3.55 3.50 3.50 1.70 3.30 3.30 3.15 3.15 3.15 3.20 2.90 2.80 2.80 2.70 2.60 2.60 2.50 2.40 2.30 0.030 0.038 0.038 0.042 0.075 0.045 0.045 0.045 0.050 0.070 0.115 0.050 0.055 0.065 0.090 0.065 0.065 0.080 0.090 0.100 0.065 0.100 0.150 0.110 0.140 0.120 0.145 0.185 0.460 0.160 0.160 0.200 0.250 0.285 0.320 0.330 0.330 0.380 0.460 0.430 0.430 0.520 0.580 0.700 2300 2100 2100 2000 1500 1700 1700 1700 1600 1500 1200 1600 1600 1500 1400 1500 1500 1400 1400 1300 1400 1200 870 1100 850 900 850 780 450 800 800 700 600 450 450 450 490 480 470 450 450 450 420 360 For detail questions, contact : sales@viking.com.tw 9 Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor WL03(Q) Wire Wound Chip Inductors / High Q Type Inductance (nH) Tolerance L Freq. (MHz) Q typ at 250(MHz) SRF typ (GHz) DCR (Ω) max. IDC (mA) max. L typ Q typ L Typ Q Typ 1.8 2.2 3.3 3.6 ±5, ±10% ±5, ±10% ±5, ±10% ±2, ±5, ±10% 250 250 250 250 23 13 32 40 16.0 15.0 9.60 9.70 0.033 0.180 0.024 0.031 2100 900 1900 1900 1.77 2.14 3.28 3.59 40 25 67 70 1.77 2.12 3.32 3.62 65 35 104 116 3.9 4.3 4.7 5.1 5.6 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 35 30 26 40 48 7.50 7.50 7.90 8.90 6.60 0.039 0.080 0.100 0.036 0.036 1600 1300 1100 1700 1700 3.88 4.29 4.65 5.08 5.6 68 58 48 84 87 3.95 4.31 4.71 5.12 5.73 108 91 75 140 456 6.0 6.8 7.2 7.5 8.2 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 49 42 48 41 46 6.00 5.80 5.40 5.30 5.90 0.036 0.042 0.052 0.080 0.054 1700 1400 1400 1300 1400 5.92 6.83 7.25 7.55 8.21 94 88 96 81 96 6.12 7.05 7.38 7.85 8.39 154 143 139 12 148 8.7 9.1 9.5 10 11 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 46 40 49 49 41 5.50 5.10 4.90 4.30 4.10 0.054 0.037 0.053 0.048 0.058 1400 1400 1400 1400 1400 8.73 9.18 9.56 10.16 11.06 97 76 98 90 78 9.00 9.64 9.99 10.64 11.82 149 109 149 142 108 12 15 16 18 22 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 37 48 45 41 44 4.10 3.60 3.50 3.30 3.15 0.088 0.078 0.085 0.066 0.140 1100 1200 1100 1200 850 12.26 15.41 16.37 18.56 22.7 69 83 77 76 77 13.2 17.2 18.7 20.9 25.9 91 124 116 100 88 23 24 27 30 33 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 40 42 44 49 45 3.00 2.95 2.80 2.80 2.70 0.183 0.074 0.150 0.130 0.170 850 1100 780 920 680 24 24.9 28.4 31.5 34.9 69 77 74 82 76 29.53 28.9 34.0 37.9 42.9 80 91 84 82 80 36 39 43 47 51 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 200 200 44 48 45 47 49 2.50 2.45 2.45 2.30 2.30 0.225 0.19 0.17 0.24 0.28 720 680 810 680 660 38.5 41.5 45.7 50.6 54.6 69 78 83 77 73 50.0 51.9 58.1 66.9 71.3 64 74 76 72 62 56 68 72 75 82 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 200 200 150 150 150 50 46 46 46 45 2.20 2.00 1.90 1.90 1.80 0.30 0.33 0.42 0.52 0.46 610 600 550 500 510 60.3 75.5 80.8 84.6 94 74 73 69 71 62 79.9 113.3 - 56 49 - 91 100 110 120 150 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 150 150 150 150 150 45 49 47 47 47 1.65 1.70 1.60 1.55 1.35 0.58 0.54 0.58 0.72 0.82 440 470 440 420 390 103 114 126.2 142.4 188.8 64 69 63 61 57 - - 180 200 210 220 250 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 100 100 100 100 100 48 47 48 47 45 1.30 1.25 1.20 1.10 1.05 1.50 2.00 2.00 2.00 3.00 310 280 280 280 240 232.2 265 288 315 - 50 47 45 41 - - - 270 300 330 360 390 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 100 100 100 100 100 46 47 46 47 47 1.05 0.99 0.93 0.93 0.88 2.25 2.80 3.60 4.00 4.00 260 220 180 170 170 - - - - www.viking.com.tw For detail questions, contact : sales@viking.com.tw 10 900MHz 1.7GHz Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor WL05(H) Wire Wound Chip Inductors / High Q Type Inductance (nH) Tolerance L Freq. (MHz) Quality Factor min. SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 2.5 5.6 6.2 6.8 8.2 ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% 250 250 250 250 250 80 @ 1500MHz 98 @ 1500MHz 88 @ 1000MHz 80 @ 1000MHz 75 @ 1000MHz 6.00 6.00 4.75 4.40 3.00 0.020 0.035 0.035 0.035 0.075 1600 1600 1600 1600 1000 10 12 15 16 18 ±5, ±10% ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 80 @ 1000MHz 80 @ 1000MHz 80 @ 1000MHz 72 @ 500MHz 75 @ 500MHz 3.00 3.00 2.80 2.95 2.55 0.060 0.045 0.100 0.060 0.060 1600 1600 1200 1500 1400 20 22 27 30 39 ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% 250 250 250 250 250 70 @ 500MHz 80 @ 500MHz 75 @ 500MHz 65 @ 500MHz 65 @ 500MHz 2.05 2.00 2.00 1.95 1.60 0.055 0.100 0.070 0.095 0.110 1400 1200 1300 1200 1100 48 51 ±2, ±5, ±10% ±2, ±5, ±10% 200 200 65 @ 500MHz 65 @ 500MHz 1.40 1.40 0.095 0.120 1200 1000 SRF (GHz) min. DCR (Ω) max. IDC (mA) max. 6.00 6.00 6.00 3.80 3.60 2.80 2.70 2.05 1.70 1.30 1.45 1.23 1.15 1.06 0.82 0.04 0.05 0.05 0.05 0.06 0.06 0.07 0.07 0.09 0.09 0.12 0.12 0.13 0.16 0.16 1600 1600 1600 1600 1600 1500 1400 1400 1300 1300 1200 1200 1100 1100 1000 WL08(H) Wire Wound Chip Inductors / High Q Type Inductance (nH) Tolerance 3.0 3.9 4.1 7.8 10 12 18 22 33 39 47 56 68 82 100 ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% ±2, ±5, ±10% L Freq. (MHz) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 Quality Factor min. 70 @ 1500MHz 75 @ 1500MHz 75 @ 1500MHz 75 @ 500MHz 60 @ 500MHz 70 @ 500MHz 62 @ 350MHz 62 @ 350MHz 75 @ 350MHz 75 @ 350MHz 75 @ 350MHz 75 @ 350MHz 80 @ 350MHz 80 @ 350MHz 50 @ 350MHz Parts (3.0nH, 7.8nH) are wound on a low profile bobbin. (Max 2.41×2.01×1.09) ■Soldering Condition IR Reflow Soldering (1) Time of IR reflow soldering at maximum temperature point 260C：10s www.viking.com.tw For detail questions, contact : sales@viking.com.tw 11 Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor ■Environmental Characteristics Electrical Performance Test Item Inductance Q SRF DC Resistance RDC Requirement Test Method HP4286/E4982A HP4286/E4982A HP4287/E4982A Micro-Ohm meter (Gom-801G)/E4982A Applied the current to coils, the temperature of coil increases ΔT15 ℃(Ta=25℃). Refer to standard electrical characteristic spec. Rated Current IDC Over Load Inductors shall have no evidence of Applied 2 times of rated allowed DC current to inductor for a period of electrical and mechanical damage 5 minutes Withstanding Voltage Inductors shall be no evidence of AC voltage of 500 VAC applied between inductors terminal and case electrical and mechanical damage. for 1 min. Insulation Resistance 1000M ohm min. 100 VDC applied between inductor terminal and case Mechanical Performance Test Item Vibration Requirement Test Method Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1 min. Amplitude: 1.5 mm Time: 2 hrs for each axis (X, Y &Z), total 6 hrs Appearance: No damage L change: within ±5% Q change: within ±10% Solder Temperature: 260±5°C Immersion Time: 10±2 seconds Resistance to Soldering Heat Component Adhesion (Push Test) 1 lbs. For 0402 2 lbs. For 0603 3 lbs. For the rest The device should be soldered (260±5 for 10 seconds) to a tinned copper subs rate. A dynamiter force gauge should be applied to the side of the component. The device must with stand a minimum force of 2 or 4 pounds without a failure of adhesion on termination Drop No damage Dropping chip by each side and each corner. Drop 10 times in total Drop height: 100 cm Drop weight: 125 g Solderability 90% covered with solder Inductor shall be dipped in a melted solder bath at 245±5 for 3 seconds Resistance to Solvent No damage on appearance and marking MIL-STD-202, Method 215 Climatic Test Item Requirement Item Temperature Characteristic -40~+125°C Humidity Temperature: 40±2°C Relative Humidity: 90~95% Time: 96±2 hrs Measured after exposure in the room condition for 2 hrs Temperature: -40±2°C Time: 96±2 hrs Inductors are tested after 1 hour at room temperature One cycle: Step Temperature（°C） Time（min.） 1 -25±3 30 2 25±2 15 3 125±3 30 4 25±2 15 Total: 5 cycles Low Temperature Storage Appearance: No damage L change: within ±10% Q change: within ±20% Thermal Shock Temperature: 125±2°C Time: 96±2 hrs Measured after exposure in the room condition for 1hour High Temperature Storage High Temperature Load Life Damp Heat with Load Temperature: 85±2°C Time: 1000±12 hrs There should be no evidence of short Load: Allowed DC current Temperature: 40±2°C of open circuit. Relative Humidity: 90~95% Time: 1000±12 hrs Load: Allowed DC current ■Storage Temperature: 15~28°C; Humidity < 80%RH www.viking.com.tw For detail questions, contact : sales@viking.com.tw 12 Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor ■Packaging Reel Dimensions & Packaging Quantity Thickness: 0.1(0.004) Max 1.2 ± 0.2 D: 21.8 ± 0.8 Embossed 178 ± 2.0 Cavity 60 ± 0.5 D: 13.0 ± 0.3 2.0 ± 0.5 9 ± 0.3 Embossed Carrier 11.4 ± 1.0 Paper Tape specification and Packaging Quantity φ 1.5 P0 P1 1.75±0.1 F B A H W P Unit: mm Type A B H F P P0 P1 W Reel (EA) WL02 0.81 1.23 0.73 3.50 2.00 4.00 2.00 8.00 4,000 WL03 1.35 1.95 0.95 3.50 4.00 4.00 2.00 8.00 4,000 Embossed Plastic Tape specification and Packaging Quantity 4±0.1 Φ 1.5 G±0.05 J±0.05 F±0.1 E±0.05 A±0.2 D±0.1 Φ 1.5 H±0.05 B±0.1 C±0.1 Unit: mm Type WL05 A 8 B 1.85 C 4 D 2.30 E 3.5 F 1.75 G 2 H 1.45 J 0.23 Reel (EA) 2,000 WL05 (H) 8 1.85 4 2.30 3.5 1.75 2 1.45 0.23 2,000 WL06 8 1.95 4 3.50 3.5 1.75 2 1.50 0.23 2,000 WL08 8 2.70 4 2.80 3.5 1.75 2 2.00 0.23 2,000 WL08 (H) 8 2.70 4 2.80 3.5 1.75 2 2.00 0.23 2,000 www.viking.com.tw For detail questions, contact : sales@viking.com.tw 13 Edition : REV.D Revision: 10-Jun-2020 【WL Series】 SMD Wire Wound Chip Inductor REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version C2 July 31,2014 - - Revises WL05 C size 1.52 -- >1.6 Version C3 Nov 07,2014 - - Increase WL08 (S) and WL02 (H) specification content Version C4 Apr 30, 2015 - - Standard Electrical Specifications updated Version C5 Jul 15, 2016 - - Increase WL03 (Q) specification content - Remove Material Description - Features increase AEC-Q200 Compliance (Standard Type) - Modify Storage Temperature - Increase Soldering Condition Version C6 Dec 23, 2016 - - Revises WL05 C size 1.6 -- >1.52 Version C7 Jul 10, 2018 - - Revises WL06 Dimensions specification A size 3.45 -- >3.56, B size 1.90 -- >2.16 C size 1.40 -- >1.52, D&F size 0.50 -- >0.51 E size 1.60 -- >1.62, J size 1.78 -- >1.80 Version C8 Nov 01, 2018 PCN-180801 - Delete 0603/ 0805/ 1008 Color Code Version D Jun 10, 2020 - - Revises Applications Description www.viking.com.tw For detail questions, contact : sales@viking.com.tw 14 Edition : REV.D Revision: 10-Jun-2020