AMT-B0-S

REV. F G DESCRIPTION Hole diameter increased to 2.95 from 2.87 Receiver hold down post increased to 4.30 from 4.15 DATE 1/23/2006 3/22/2006 H J Hole diameter decreased to 12.1 from 12.4 Hole diameter increased to 12.6, flange modified 4/3/2006 10/24/2006 K Mounting holes changed to 3.96 THRU ALL, 5.79 1.02 9/4/2015 4.32 0.05 A 4.30 +0.05 -0.00 14.20 0.05 5.15 +0.05 -0.00 9.00 A 0.38 +0.00 -0.05 3.77 1.86 4.59 0.05 SECTION A-A 28.77 26.80 1.00 16.7 3.29 0.05 K K NOTES: CRITICAL DIMENSIONS FOR INSPECTION 16.20 +0.10 -0.00 SCALE 1:1 TOLERANCE: ±0.1mm UNLESS NOTED 60° (TYP) 43.38 SEE PAGE 2 FOR HOLE LAYOUT 16° (TYP) 2.5X2.00 TALL (2 PLCS) RoHS DRAFTS ACCORDING TO 3D CAD MODEL 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com TITLE: REV: AMT 102 BASE K K PC FILE NAME: AMT-102-Base-REV-K PART NO. 1245-0003R DRAWN BY: COPYRIGHT 2006 BY CUI INC. RDS K UNITS: MM [INCHES] APPROVED BY: SCALE: 2:1 R1.00 (2 PLCS) REV. F G DESCRIPTION Hole diameter increased to 2.95 from 2.87 Receiver hold down post increased to 4.30 from 4.15 DATE 1/23/2006 3/22/2006 H J Hole diameter decreased to 12.1 from 12.4 Hole diameter increased to 12.6, flange modified Mounting holes changed to 3.96 THRU ALL, 5.79 1.02 4/3/2006 10/24/2006 K 0.27 (TYP) 9.53 9.53 8.98 8.98 6.93 DETAIL A SCALE 4 : 1 9/4/2015 A +0.10 12.60 0.00 1.70 (2 PLCS) 8.98 10.73 (2 PLCS) 4.00 4.00 2.95 (2 PLCS) 5.36 (2 PLCS) 8.98 (2 PLCS) 15.75 (2 PLCS) NOTES: CRITICAL DIMENSIONS FOR INSPECTION 3.96 (4 PLCS) K DRAFTS ACCORDING TO 3D CAD MODEL 6.93 8.98 8.98 9.29 9.29 10.48 10.48 RoHS TOLERANCE: ±0.1mm UNLESS NOTED 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com TITLE: AMT 102 BASE, SHEET 2, HOLE LAYOUT PART NO. PC FILE NAME: AMT-102-Base-REV-K-page-2 COPYRIGHT 2006 BY CUI INC. RDS K UNITS: 1245-0003R DRAWN BY: REV: MM [INCHES] APPROVED BY: SCALE: 2:1